Toyota Hilux Bull Bars, Towing Mirrors and Accessories

The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles. When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim - Clearance issues All this can be mitigated by installing a set of Polyair Bellows. The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-100psi - Built with a superior 2-ply fabric reinforced rubber - Ultra high strength & corrosion proof Zytel ® Nylon end caps - Most popular kits do not require drilling into the chassis - Easy to install with illustrated instructions - Quick connecting, easy to use air fittings. - Kits designed for standard height and raised applications - Bespoke design for each vehicle 2 year, unlimited km warranty. Position: Rear Toyota - Hilux GEN 8 (excl Rogue), 2015- on , 4WD (& 2WD HI-RIDE)

The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles. When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - suspension bottoming out - rough ride - excessive sway & body roll - unpredictable braking characteristics - poor headlight aim All this can be mitigated by simply installing a set of Polyair Red Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-35psi - Tough moulded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Toyota - Hilux GEN 5 & 6,1988 - 2004, RWD + 4WD

POLYAIR 2" LIFT RED SERIES AIRBAG KIT, TOYOTA HILUX -75795 Polyair rasied height rear red bags suits loads up to 450kg. (sold as a kit) The benefits of fitting the red Polyair air Bags is to eliminate sag and prevent body roll by simply adding or removing air. All kits come with full fitting instructions and can be fitted to coil or leaf spring suspension on cars, commercial and 4wd vehicles. The red polyair air bags have a 450kg load rating and all Polyair Bags come with a 12month/20,000km warranty. If you need help with load carrying "Cushion The Blow" with Polyair Bags.

The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles. When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim - Clearance issues All this can be mitigated by installing a set of Polyair Bellows. The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-100psi - Built with a superior 2-ply fabric reinforced rubber - Ultra high strength & corrosion proof Zytel ® Nylon end caps - Most popular kits do not require drilling into the chassis - Easy to install with illustrated instructions - Quick connecting, easy to use air fittings. - Kits designed for standard height and raised applications - Bespoke design for each vehicle 2 year, unlimited km warranty. Position: Rear Toyota - Hilux GEN 8 (excl Rogue), 2015- on , 4WD (& 2WD HI-RIDE)

The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly. A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring. Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market. 3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS * Economy * Cruise * Sport Installation * Download the Torqit App * Remove factory plug from the accelerator * Install the new harness * Add the device in the Torqit App Key Features * 5-year warranty * Vehicle-specific software * Completely wireless unit * 3 ideal settings perfect for any driving condition * Utilises all factory plugs, no cutting or rewiring required * Manufactured in Germany

The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly. A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring. Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market. 3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS * Economy * Cruise * Sport Installation * Download the Torqit App * Remove factory plug from the accelerator * Install the new harness * Add the device in the Torqit App Key Features * 5-year warranty * Vehicle-specific software * Completely wireless unit * 3 ideal settings perfect for any driving condition * Utilises all factory plugs, no cutting or rewiring required * Manufactured in Germany

3″ TURBO BACK EXHAUST FOR TOYOTA HILUX 3.0L D4D: 07/2007 – 07/2015 FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. Upgrade your Toyota Hilux 3.0L D4D with TORQIT's premium 3" Turbo Back Performance Exhaust. Designed specifically for Cab Chassis, Dual Cab and Extra Cab Hilux models, this Australian-engineered exhaust system delivers increased power and torque, improved exhaust flow, reduced exhaust gas temperatures (EGTs) and a deeper, more refined exhaust note. Manufactured from premium 304 grade brushed stainless steel up to 2mm thick, this fully mandrel bent exhaust system is built to withstand Australia's harsh touring, towing and off-road conditions. Heavy-duty TIG welded flanges and reinforced mounting brackets ensure exceptional durability and long-term reliability. Running directly from the turbo, the system features a high-flow diesel catalytic converter, premium double braided flex bellows (where applicable) and titanium-coated dump pipes on compatible models. These premium components work together to reduce back pressure, improve engine efficiency and maximise exhaust flow for stronger overall performance. The larger diameter pipework also produces a deep, sporty exhaust note without excessive cabin drone, making it an ideal upgrade for both daily driving and demanding 4WD adventures. KEY FEATURES 3" Turbo Back Performance Exhaust Performance gain of up to 14KW / 79NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system Internal and external TIG welded flanges Laser-cut flanges Heavy-duty mounting brackets Titanium-coated dump pipe (where applicable) High-flow diesel catalytic converter Double braided stainless steel flex bellows (where applicable) Deep exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems INSTALLATION This bolt-together exhaust system includes a complete fitting kit and can be installed using standard workshop tools. Professional installation is recommended to ensure correct alignment and optimum performance. VEHICLE COMPATIBILITY Toyota Hilux 3.0L D4D Turbo Diesel Cab Chassis Dual Cab Extra Cab 07/2007 – 07/2015 Please Note: Some engine variants require a cast dump pipe rather than a titanium-coated stainless steel dump pipe. Where applicable, the correct cast component will be supplied. Please Note: If your vehicle has aftermarket accessories such as long-range fuel tanks or suspension upgrades, please contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional processing time before dispatch.

3″ TURBO BACK EXHAUST FOR TOYOTA HILUX 3.0L: 12/1999 – 2005 PERFORMANCE GAIN: 16KW / 29NM FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last Upgrade your Toyota Hilux MY02/MY03/MY04 3.0L with TORQIT's premium 3" Turbo Back Performance Exhaust. Designed specifically for Cab Chassis and Dual Cab models, this Australian-engineered exhaust system improves power, torque and engine efficiency while delivering the deep exhaust note TORQIT is renowned for. Manufactured from premium 304 grade brushed stainless steel up to 2mm thick, this fully mandrel bent exhaust system is built to withstand Australia's harsh towing, touring and off-road conditions. Heavy-duty TIG welded flanges and reinforced mounting brackets provide exceptional durability and long-term reliability. Running directly from the turbo, the system features a high-flow diesel catalytic converter, premium double braided flex bellows (where applicable) and titanium-coated dump pipes on compatible models. Together these premium components improve exhaust flow, reduce back pressure, lower exhaust gas temperatures (EGTs) and maximise engine performance. The larger diameter tubing also delivers a deep, sporty exhaust note without excessive cabin drone, making it the ideal performance upgrade for daily driving, heavy-duty work and weekend adventures. KEY FEATURES 3" Turbo Back Performance Exhaust Performance gain of up to 16KW / 29NM Premium 304 grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system Internal and external TIG welded flanges Laser-cut flanges Heavy-duty mounting brackets Titanium-coated dump pipe (where applicable) High-flow diesel catalytic converter Double braided stainless steel flex bellows (where applicable) Deep exhaust note without cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems INSTALLATION This bolt-together exhaust system includes a complete fitting kit and can be installed using standard workshop tools. Professional installation is recommended to ensure correct alignment and optimum performance. VEHICLE COMPATIBILITY Toyota Hilux 3.0L Turbo Diesel MY02 / MY03 / MY04 Cab Chassis Dual Cab 12/1999 – 2005 Please Note: Some engine variants require a cast dump pipe rather than a titanium-coated stainless steel dump pipe. Where applicable, the correct cast component will be supplied. Please Note: If your vehicle has aftermarket accessories such as long-range fuel tanks or suspension upgrades, please contact our team before ordering to confirm compatibility. Manufactured to Order: While key components may be held in stock, final assembly and finishing are completed to order and may require additional processing time before dispatch.

N70 1KD Hilux High Flow Airbox package. The Fatz Built N70 Hilux Airbox is in the line of our latest generation of Airboxes. With All aluminium construction, factory rubber mounting and CNC machined MAF housing, this product will not disappoint. The N70 factory airbox outlet and MAF mounting leaves a lot to be desired form a flow perspective, with a very tight bend at the outlet of the box into the MAF tube. This also makes the integration of the MAF into a different tube with better flow characteristics a little challenging. We have spent a lot of time in testing and development on this product to ensure it is accurate. Our box will not cause any drive-ability or tuning issues. The Box has a 4″ inlet to couple with our snorkel or existing snorkels in the same location. The box is supplied with plumbing to the turbo inlet, for a bolt in, drive away experience, with all needed to fit out. The Airbox has a 10mm thick perspex lid to make filter inspections a breeze. The box houses our 9″ long filter element in either an 8 layer gauze or paper element. Both options well suited for off road applications. With ease of fitment, accuracy in construction and performance to match the quality. You will be happy with you Fatz built N70 Hilux Airbox package. Supplied with: Airbox, clear lid, filter, MAF housing, Plumbing to turbo inlet, instructions for fit out. NOT COMPATIBLE WITH SAFARI SNORKEL WITHOUT MODIFICATIONS TO THE AIRBOX NOTE:  Please note that some custom orders may require up to a 2-week wait for completion 

Fatz High Flow N80 Hilux Airbox The Fatz built N80 Airbox incorporate our CNC machined MAF housing to retain factory air flow readings, a filter of your choice (8 layer oiled gauze or dry element paper in a 9 inch POD configuration), clear acrylic lid for a great look and easy checking of filter soiling. The box incorporates a duck valve drain to allow water to drain away from the filter, when ingested through the snorkel for peace of mind motoring. Mounting the airbox is taken care of by the factory mounting rubbers and fasteners. Plumbing from the air box outlet to the turbo inlet is comprised of silicone couplings and powder coated alloy pipe supplied as part of the kit. Supplied in all cases with filter, clear lid, plumbing from airbox to turbo inlet pipe in silicone and alloy pipe, and instructions to install. NOTE:  Please note that some custom orders may require up to a 2-week wait for completion 

The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle. Easy Installation Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free. Two-Way Strut System The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift. Compatibility TOYOTA HILUX

The HSP Tail lock is truly a revolutionary product allowing you to sync your tailgate with your existing vehicle remote. Installation takes less than an hour as there is no drilling required along with simple wiring. The Tail Lock gives peace of mind knowing that when your car is locked, so is the tailgate.   Features Syncs with factory remote Hidden non-intrusive design Works with proximity remote Gives ultimate security for your tub   Fitting No drilling required Simple wiring does not require an auto electrician

The HSP Tail lock is truly a revolutionary product allowing you to sync your tailgate with your existing vehicle remote. Installation takes less than an hour as there is no drilling required along with simple wiring. The Tail Lock gives peace of mind knowing that when your car is locked, so is the tailgate.   Features Syncs with factory remote Hidden non-intrusive design Works with proximity remote Gives ultimate security for your tub   Fitting DIY Installation (DIY Instructions) No drilling required Simple wiring does not require an auto electrician   Warranty 1 Year Warranty

The HSP Load Slide is a purpose-built, retractable bed slide. Each unit has an entirely custom cut platform, contouring to your specific vehicle and is designed to give better access and management of your cargo. In other words, it’s the ultimate slide tray for your ride. 75% Platform Extension The Load Slide is operated via an easy-to-use handle that provides up to 75% extension beyond your tub. This provides simple and safe access to your goods when required. 250kg Weight Rating when Extended Combining advanced engineering with heavy-duty materials means the Load Slide can handle up to 250kg of dispersed weight when fully extended. Purpose Built Side Rails The custom cut heavy duty side rails are also designed to contour around the edges acting as a barrier and anchor points. This means you can move more with less effort than ever before. Custom Cut Platform One size fits all is for baseball caps and shortcut products. Your vehicle is unique, just like you, and so is the HSP platform. Using advanced CNC routing machines, The HSP Load Slide is completely custom cut to suit your specific requirements so there is no space wasted. Multiple Latching Positions The HSP Load slide has multiple latching positions every 20 centimetres allowing the user to stop and latch the load slide by simply letting go of the handle. Compatibility TOYOTA HILUX

The HSP Load Slide is a purpose-built, retractable bed slide. Each unit has an entirely custom cut platform, contouring to your specific vehicle and is designed to give better access and management of your cargo. In other words, it’s the ultimate slide tray for your ride. 75% Platform Extension The Load Slide is operated via an easy-to-use handle that provides up to 75% extension beyond your tub. This provides simple and safe access to your goods when required. 250kg Weight Rating when Extended Combining advanced engineering with heavy-duty materials means the Load Slide can handle up to 250kg of dispersed weight when fully extended. Purpose Built Side Rails The custom cut heavy duty side rails are also designed to contour around the edges acting as a barrier and anchor points. This means you can move more with less effort than ever before. Custom Cut Platform One size fits all is for baseball caps and shortcut products. Your vehicle is unique, just like you, and so is the HSP platform. Using advanced CNC routing machines, The HSP Load Slide is completely custom cut to suit your specific requirements so there is no space wasted. Multiple Latching Positions The HSP Load slide has multiple latching positions every 20 centimetres allowing the user to stop and latch the load slide by simply letting go of the handle. Compatibility TOYOTA HILUX

Did you know that Australia is one of the only countries in the world to have sports bars standard on most vehicles? That’s why HSP created the Armour Bar. A purpose-built sports bar, a completely individual design using only the best materials to achieve a beautiful, functional, and premium sports bar. Light Weight The Tub is essentially the whole reason you purchased a Ute so when designing the Armour bar HSP wanted to ensure that it was as light weight and non-invasive as possible. The clear choice was alloy, it weighs about half of any comparable steel bar, meaning less stress on your tub and a higher payload. Anti Rust Design Unlike steel sports bars, the front and rear of the Armour Bar contain almost no iron, and without iron, there is no rust. Any non-alloy parts such as brackets and bolts are either powder coated or have anti-rust protection. Middle Curve Extension The Armour Bar’s rear legs start from the middle and curve out towards the rear. This not only looks great but gives you the ability to centre mount lightweight accessories such as spotlights Premium Powder-Coated Finish The Armour bar comes standard with a premium matte powder-coated finish. Not only does this look and feel sensational but when compared to a painted or polished finish, powder coat is best for withstanding the elements. Compatible with Roll R Covers The Armour Bar looks fantastic on any dual cab naked tub. However, for anyone who has a HSP Roll R Cover S3 and above, HSP now have a mounting kit to adapt your Armour bar on. Each bar has been specifically designed to sit perfectly in line with your cabin. Compatibility TOYOTA HILUX

The HSP Load Bar. A roll top cross bar rack that is perfect for snow trips with the family, a tour de neighbourhood in some excessively tight lycra, or even a perfect spot to mount the shovel for your extremely competitive sandcastle building. Full Metal Frame The HSP Load Bar has a full metal frame meaning that your precious cargo are resting on a solid foundation. Roll R Cover Specific Design The Load Bar is designed specifically to suit the HSP Roll R Cover. Which means installation is as simple as can be. All you do is slide the assembled roll top cross bar rack into the HSP Roll R Cover T channel and away you go. Additionally, the product-specific design perfectly compliments the Roll R Cover… Compatible with Common Accessories The HSP Load bar has a common channel that allows you to use accessories compatible with awesome roll top roof rack manufacturers such as Rhino-Rack, Thule, and Yakima. Compatibility TOYOTA HILUX

The HSP Load Bar. A roll top cross bar rack that is perfect for snow trips with the family, a tour de neighbourhood in some excessively tight lycra, or even a perfect spot to mount the shovel for your extremely competitive sandcastle building. Full Metal Frame The HSP Load Bar has a full metal frame meaning that your precious cargo are resting on a solid foundation. Roll R Cover Specific Design The Load Bar is designed specifically to suit the HSP Roll R Cover. Which means installation is as simple as can be. All you do is slide the assembled roll top cross bar rack into the HSP Roll R Cover T channel and away you go. Additionally, the product-specific design perfectly compliments the Roll R Cover… Compatible with Common Accessories The HSP Load bar has a common channel that allows you to use accessories compatible with awesome roll top roof rack manufacturers such as Rhino-Rack, Thule, and Yakima. Compatibility TOYOTA HILUX

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years

This 1156mm/45.5" long full size Slimline II cargo carrying roof rack kit for the Toyota Hilux (2005-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Drilling is required for installation.   This 1156mm/45.5" long full size Slimline II cargo carrying roof rack kit for the Toyota Hilux (2005-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 1 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x FASS015 - Foot Set Angled / 75mm - by Front Runner1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 23.0kg (50.8lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0") Shipping Weight:26.3kg (58.0lbs)

  This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Hilux (2005-2015). Drilling may be required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 1 x FATH001 - Toyota Hilux (2005-2015) Foot Rails - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner  Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 24kg (54lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18")Length 1615mm (64")Height 140mm (6") Shipping Weight: Weight 28.3kg (62.3lbs)

This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo Double Cab. Drilling into the vehicles roof is required to insert mounting hardware, a template is provided for hole placement. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRTH011T - Toyota Hilux Revo DC (2016-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FATH002 - Toyota Hilux Revo DC (2016-Current) Foot Rails - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 25kg (56lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 620mm (24") Length 1640mm (65") Height 160mm (6") Shipping Weight: Weight 29.4kg (64.7lbs)

This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions. 180kg / 397lb drawer load carrying capacity. Hold open feature: drawer locks open while parked on uneven surfaces. High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base. Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear. The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides. A fridge (footprint of 750mm x 425mm or smaller) can be installed on the left hand side of the drawer for access through a gullwing style window. The right rear deck and back right side deck each have a cut out (215mm in diameter) to fit and secure a gas/propane bottle or similar shaped object. The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc. To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle. The deck is covered with a durable, UV resistant gray marine carpet detailed to complement the vehicles interior contours. The nylon carpet insulates secured cargo from noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. No drilling is required when fitted without lift channels and when a standard canopy is used and tailgate is left in place. If your vehicle has a canopy with a swing open door that has replaced the original tailgate, drilling 3 lifting channels (included) may be necessary. All Front Runner Storage Systems are backed by a 2 year warranty. *Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately. Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner. Features Consists of: 1 x Front Runner Drawer unit (SSDR012) 1 x Toyota Hilux Revo DC (2016-Current) Touring Deck Completion Set (SSDS108) 1 x Drawer System Wing Set (SSWS004) 1 x Push to close latch with 2 keys per lock 3 x Accessory channels 6 x Eye Nuts for accessory channels Installation Hardware includes 4 turnbuckles to secure unit to vehicle with standard canopy Fitting Instruction Materials used: Black powder coated steel - Drawer Bins, Frame & Front Covers Nylon Carpet & Laminated Plywood - Top Deck & Deck Set Product Dimensions: Overall Dimensions: 1510mm (59.5") L x 1604mm (63.2") W x 335mm (13.2") H Drawer Internal Dimensions: 1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") H Weight: 80.5kg (177.5lbs)

This low-profile flat deck Slimsport rack has a load-carrying area of 1386mm (54.6") x 1147mm (45.2"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket (RRAC182) for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Toyota Hilux H48 DC (2015-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack (RRAC213) is required for installation. Note: Drilling required. Note: Under Rack Tables are not compatible with the Slimsport rack kit range Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KSTH002 - Toyota Hilux (2015-Curr) SlimSport Roof Rack Kit1x RRAC244 - Toyota Hilux H48(2015-Curr)SsportRack Wind Fairing1x RRAC971 - Protection Strip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions: 1386mm (54.6") L x 1147mm (45.2") W x 116mm (4.6") H Approximate Installed Weight: 24.352537kg (53.69lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 160mm (06") Shipping Weight:Weight: 25kg (55lbs)

This low-profile flat deck Slimsport rack has a load carrying area of 1386mm (54.6") x 1147mm (45.2"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately). The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet. Included in the Toyota Hilux DC Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Drilling required. Note: Under Rack Tables are not compatible with the Slimsport rack kit range. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSTH004T - Toyota Hilux (2015-Current) Slimsport Roof Rack Kit Lightbar ready - by Front Runner Consisting of: 1x KSTH002 - Toyota Hilux (2022-Curr) SlimSport Roof Rack Kit 1x RRAC245 - Toyota Hilux Slimsport Rack 40" L Bar Wind Fairing 1x RRAC971 - Protection Strip Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 24.352537kg (53.69lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 330mm (13") Length: 1700mm (67") Height: 160mm (06") Shipping Weight: Weight: 25kg (55lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Hilux when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT011 - Toyota Hilux (2016-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x LBSK017 - Roof Load Bar Pair 1475mm(W) Material used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 8.08kg (17.81lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6") Length: 1585mm (62") Height: 165mm (6") Shipping Weight: Weight: 8.6kg (19lbs)

This kit creates a full-size rack that sits above your Toyota Hilux's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT041T - Toyota Hilux (2016-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount 1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30.46kg (67.15lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 250mm (10") Shipping Weight: Weight: 33.2kg (73lbs)

A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1255mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. NOTE: These load bars are for the Toyota Hilux with external rain gutters only. If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase. Features KRTH013 - Toyota Hilux DC (1988-1997) Load Bar Kit / Gutter Mount - by Front Runner Consisting of: 2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner 1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 7kg (15lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 120mm (5") Length 1370mm (54") Height 180mm (7") Shipping Weight: Weight 8.0kg (17.6lbs)

This kit creates a full size rack that sits above your Toyota Hilux Legend RS's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1156mm) and 4 feet that fit into the existing tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRTH013T - Toyota Hilux Legend RS Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2x FASS016 - Flat Feet (pair) / 65mm1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 23.29kg (51.35lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18"); Length: 1730mm (68"); Height: 240mm (9")   Shipping Weight: Weight: 23.8kg (52lbs)

This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Hilux (1984-1988) contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRTH001L - Toyota Hilux N50/N60/N70 4th Gen (1984-1988) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2x LASS102 - No 2 Leg 130mm (Pair) 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.51kg (56.24lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 140mm (6") Shipping Weight: Weight: 25.93kg (57lbs)

This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo 2016+. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Features KRTH012T - Toyota Hilux Revo DC (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner Consisting of: 1x FATH003 - Toyota Hilux Revo DC(2016-Current) Foot Rails/Low1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 28.28kg (62.35lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18"); Length: 1730mm (68"); Height: 240mm (9")   Shipping Weight: Weight: 28.57kg (63lbs)

This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo Extended Cab. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Features KRTH022T - Toyota Hilux Revo Extended Cab (2016-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner Consisting of: 1x FATH006 - Toyota Hilux Revo ExCab(2016-Curr) Foot Rails/Low1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 20.78kg (45.81lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 275mm (11")   Shipping Weight: Weight: 23kg (51lbs)

This kit consists of two (4) x Tent Brackets Works with both Front Runner Roof Racks and Front Runner Load Bars and fits a wide variety of hard shell tents including various ranges from James Baroud and Autohome. These brackets let you mount your James Baroud or Autohome tents with the proper lateral support, even if your rack is narrower or wider than your tent base. When fitting a James Baroud or Autohome tent to a rack that is smaller (narrower, shorter or both) than your tent base footprint, the included spacer raises the mounting height of the tent so it rests on the edge of the racks side profiles for full support. When mounted to a rack that is larger (longer and wider) than your tent base footprint, the brackets position your tent flush on the rack for full support and use of the included spacer isnt required. Supplied with all installation hardware and fitting instructions. Features Consists of: 4 x Tent Brackets 4 x James Baroud Channel Plates 4 x Auto Home Channel Plates Installation Hardware Fitting Instructions Materials used: Black powder coated steel Product Dimensions: (Per Bracket) 140mm (5.5") L x 23.5mm (0.9") W x 81mm (3.2") H Weight: (Per Pair of Brackets) 1.6kg (3.5lbs)

Up your Toyota Hilux Revo's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Toyota. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind. This Pro Bed Rack Kit is specifically designed to fit the Toyota Hilux Revo Pro load bed. Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/ Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck. Secures to the bed of the Toyota Hilux Revo Pro with specific mounting brackets. Drilling is required for fitment.  The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab. Features PBTH001T - Toyota Hilux Revo Double Cab (2016-Current) Pro Bed Rack Kit Consisting of: 3x FASS025 - Foot Set / 70mm - 80mm 1x PBTH001S - Toyota Hilux Revo Pro Bed Rack (2016 - Current) Pr 3x RRAC921 - Canopy Rack Kit Installation Set 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 70.3kg (154.98lbs) Shipping Dimensions: Width: 640mm (25") Length: 1720mm (68") Height: 470mm (19") Shipping Weight: Weight: 82kg (180lbs)

This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Hilux Revo Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.   This Pro Bed System is specifically designed to fit the Toyota Hilux Revo Double Cab load bed. This System provides the frame to customize your Load Bed storage configuration. Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.  Secures to the load bed of the Toyota Hilux Revo Double Cab with specific mounting brackets. Drilling is required to for fitment. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks. The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net. For further information on installation, please see the fitment instructions in the INSTALL tab. Features PBTH001S - Toyota Hilux Revo Double Cab (2016-Current) Pro Bed Rack System Consisting of: 1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium 1x PBRA001 - Pro Bed Rack Universal Structural Components 1x PBTH001 - Toyota Hilux Revo Pro Bed Rack Mounting System Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 49.53kg (109.19lbs) Shipping Dimensions: Width: 640mm (25") Length: 1230mm (48") Height: 470mm (19") Shipping Weight: Weight: 52kg (114lbs)

This 954mm/37.6" long, full-size, Slimline II Roof Rack Kit contains the Slimline II Tray, Wind Deflector, two (2) Tracks, and four (4) Feet to mount the Slimline II Tray to your 2016-Current Toyota Hilux Revo Extra Cab. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a limited lifetime warranty.* Note: Drilling is required for installation. Features KRTH019T - Toyota Hilux Revo Extra Cab (2016-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FASS012 - Foot Set / 40mm - 50mm 1x FASS015 - Foot Set Angled / 75mm 1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L) 1x TRTH007 - Toyota Revo Extra Cab (2016-Current) Tracks Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 20.25kg (44.64lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 275mm (11") Shipping Weight: Weight: 22kg (48lbs)

All vehicle based adventures require you to carry valuables. Dont leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft. The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor on both the driver side and the passenger side, yet is still easily accessible. Manufactured with black powder coated 14 gauge, thick steel. Designed and built in South Africa - a country where crime deterrence is an art form.

The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles. The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads! When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim All this can be mitigated by simply installing a set of Polyair Ultimate Series! The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights. In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’ The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support! Features: - Air adjustable from 5-60psi ! - Tough molded polyurethane construction - Easy to install using common tools - Easy to follow, illustrated instructions - Quick connecting, easy to use air fittings. 2 year, unlimited km warranty Position: Rear Toyota - Landcruiser 300 Series

MSA 4x4 HiLux 7th Gen SR5 + HiLux SR5 Dual Cab Front Seat Covers- HL56 SUITS: HiLux 7th Gen SR5 Single/Extra Dual Cab (11/13- 10/15) + HiLux (08/09- 10/13) SR5 Single/Extra Dual Cab Front twin bucket airbag seats FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean

MSA 4x4 HiLux 7th Gen SR +HiLux SR Single/Extra/Dual Cab Front Seat Covers- HL41 SUITS: HiLux 7th Gen SR Single/Extra/Dual Cab (11/13-10/15) + HiLux (05/05- 10/13) SR Single/Extra/Dual Cab Front twin bucket airbag seats FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean