Toyota Hilux Bull Bars, Towing Mirrors and Accessories

VEHICLE DATE: 2005-2015 PRODUCT TYPE: NON Power Fold SUITS: Toyota HiLux N70 (Gen 7) Chrome, Manual FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

VEHICLE DATE: Toyota HiLux (2022-Current) & Fortuner (2022-Current) PRODUCT TYPE: NON Power Fold SUITS: Toyota HiLux N80 Gen 8 & Fortuner Chrome, Electric, Indicators, Blind Spot Monitoring FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

VEHICLE DATE: Toyota HiLux (2015-Current) & Fortuner (2015-Current) PRODUCT TYPE: NON Power Fold SUITS: Toyota HiLux N80 Gen 8 & Fortuner Chrome, Heated, Electric, Indicators FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

SUITS: Toyota HiLux 8th Gen & Fortuner Chrome, Electric, Indicators, Blind Spot Monitoring, Power Fold, Puddle Light, Camera Provision FEATURES:  Four different mirror positions Large, single mirror lens Adjustable viewing angles Vertical and horizontal adjustment Unique pivot design Fold inwards or outwards ADR Compliant Injection moulded and die-cast aluminium components INCLUDES:  MSA 4X4’s 5 Year Warranty MSA POWER FOLD™ is a trademark used under licence The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing. Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles. The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions.Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

PRODUCT CODE: TM2700 VEHICLE DATE: 2005-2015 PRODUCT TYPE: NON Power Fold SUITS: Toyota HiLux N70 (Gen 7) Black, Manual   MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles.   The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

FOCAL TOYOTA HILUX POWERED 6.2 PACK 2006-2019 FITS TOYOTA HILUX 2006-2019 Front: IS TOY 165 SplitsRear: IC TOY 165 CoaxialSubwoofer: PSB200Amplifier: Impulse 4.320 Power 2×55 Watts RMS to Front Speakers, 1×160 Watts RMS to SubwooferCables: IW IMP 2.1, IW TOY Y ISO HARNESS FRONT: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system. 

Front: IS TOY 165 Splits or *IS TOY 165 TWU if no factory tweeter podsRear: IC TOY 165 Coaxial Sub:Subwoofer: PSB 200 8inch Subwoofer Mounted in Sealed EnclosureAmplifier: Impulse4.320 Power 2x55WattsRMS to Front Speakers, 1x160WattsRMS to SubwooferCables: IW IMP 2.1, IW TOY Y ISO 2006-2019 or IW TOY V2 Y ISO 2020-2023, IW PWSUP600 FRONT: IS TOY 165 is a two-way component kit with a 6¬Ω” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IS TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. OR: The IS TOY 165 TWU kit is designed for drivers who want to replace their original audio system with a quality sound solution. The speaker drivers integrate the Polyglass cone for defined midrange and the Aluminium/Magnesium inverted dome tweeter, a Focal technology allowing perfectly rendered trebles. REAR: IC TOY 165 is a two-way coaxial kit with a 6¬Ω” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IC TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. SUBWOOFER: The compact PSB200 measures less than 51/8″ deep (13cm deep, with the grille) and therefore slides easily into a car boot. And its size isn’t the only great feature: it is also easy to use and delivers quality sound performance thanks to its 8″ subwoofer that has 250 watts of power. Delivered with brackets, screws and a set of hook-and-loop fastener, PSB200 can be fixed in various locations in your vehicle and it perfectly completes a 2 or 3-way audio system while remaining discreet and delivering precise and dynamic bass.With this passive enclosure, discover the pleasure of all sound nuances during your drive. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: The Focal Inside IW IMP 2.1  car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring. The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. OR: The Focal Inside I IW TOY Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320  compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original car radio and of Focal Inside extension cables.

Alpine Hilux 2012-2015 R2 Series Speaker Solution ( Front & Rear ) -Hl15-R265 Turn up the bass in your Toyota Hilux — the next Generation R-Series are born to be played loud with Alpine’s all-new R-Series ‘direct fit’ premium speaker upgrade. Equipped with Alpine’s exclusively designed tweeter housing superior sound quality is achieved, all-while your cabin space is enhanced with its striking appearance and premium finishes inclusive of a machine finished metal Alpine logo and contrasting black chrome accent. Alpine engineered and reborn from the ground up, the all-new R-Series speaker housings unites true Hi-Fi sound quality and ultra-bass performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housing with a machine cut Alpine logo and an elegant black chrome bezel which are all pre-assembled parts ready for direct installation to your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters housed within the centre of the speaker and tweeter delivers an ultra-clear, yet highly detailed and smooth response. They play right up to 40kHz allowing harmonics to reveal the finest of nuances for an authentic sound experience, faithfully to the original recording. Direct Fit Installation All speakers interface directly to the OEM, providing a quick and easy ‘plug-n-play’ connection. This means there is no need to cut, solder or modify any of the vehicle’s original wiring — saving you time by easily utilising the original speaker wires, allowing for a straight and simple installation. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. Features Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Swivel Application allowing the sound to be focused for the best in-car sound performance Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 65Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Swivel Tweeters Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 165mm Woofer Diameter (in): 6-1/2″ Woofer Mounting Diameter (mm): 176mm Woofer Mounting Diameter (in): 6-15/16″ Woofer Mounting Depth (mm): 59mm Woofer Mounting Depth (in): 2-3/8″  

This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Hilux (1988-1997) contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRTHT01L - Toyota Hilux (1988-1997) Slimline II Roof Rack Kit / TallConsisting of:2x LASS103 - No 3 Leg 155mm (Pair)1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 21.7kg (47.84lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 140mm (6")Shipping Weight:Weight: 26.19kg (58lbs)

Transport gear over the roof of your 2016-Current Toyota Hilux Revo DC with this low-profile set of Load Bars. This kit allows the use of many Front Runner rack accessories, without the need to install a full roof rack. Includes wind deflector, four (4) mounting feet and two (2) 1165mm Load Bars that fit into the supplied tracks Load Bars are mounted via mounting feet that bolt directly onto the supplied tracks Uses the same strong, corrosion-free aluminum slats found in Front Runner racks Sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats Made from steel and durable, weather-resistant black powder coated aluminum Includes all hardware, components and installation guide needed to fit Load Bars on a vehicle Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.   KRTH022 - Toyota Hilux Revo DC (2016-Current) Load Bar Kit / Track & Feet - by Front RunnerConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK013 - Load Bar Pair 1165mm(W)1x TRTH006 - Toyota Revo DC (2016-Curr) Tracks/1300mm(L)1x WDLB001 - Load Bar Wind Deflector / 10mmMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.44kg (18.61lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 115mm (5")Length: 1320mm (52")Height: 255mm (10")Shipping Weight:Weight: 7.14kg (16lbs)

This kit creates a full size rack that sits above your Toyota Hilux Rogue's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 954mm) and 4 Pickup Truck Bed Roll Top Legs that fit into the existing factory/OEM bed tracks.  All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*   KRTH014T - Toyota Hilux Rogue Load bed Rack KitConsisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 18.93kg (41.73lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 245mm (10")Shipping Weight:Weight: 23kg (51lbs)

A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. KRTH012 - Toyota Hilux (2005-2015) Load Bar Kit / Track & Feet - by Front Runner Consisting of: 1 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner  Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 8kg (17lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 115mm (5")Length 1290mm (51")Height 240mm (9") Shipping Weight: Weight 8.9kg (19.5lbs)

This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Hilux (2005-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling may be required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab. KRTH008T - Toyota Hilux (2005-2015) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 22.9kg (50.5lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0") Shipping Weight:26.2kg (58.0lbs)

Introducing RubberTree Deep Dish Floor Liners . Whether its just the day to day city drive, escaping into the world of adventure or a hard slog on site, these floor liners provide the ultimate vehicle interior protection. Crafted from recycled materials, these floor liners are as tough on mess as they are on environmental impact. They boast 100% waterproof protection, making cleanup a breeze after muddy trails or messy commutes. With vehicle-specific retention clips & precision moulded fit, these liners stay securely in place whilst protecting your footwell interior along every contour. Plus, rest easy with our Wear-through Lifetime Manufacturer's Warranty, guaranteeing long-lasting durability. Keep it simple and elevate your vehicle's interior with RubberTree Deep Dish Floor Liners. Your vehicle deserves the best, and so do you.   Specifications Size: Full Set - 1st & 2nd Row Clips: Vehicle specific retention clips Material: Recycled Material / 100% Waterproof Warranty: Wearthrough lifetime warranty Fitment: 3D scanned for precision fit

FITS TOYOTA HILUX 2020-2023 Bundle Includes: Amplifier: Impulse 4.320 Power 2×55 Watts RMS to Front Speakers, 1×160 Watts RMS to Subwoofer Cables: IW IMP 2.1, IW TOY Y ISO 2020-2023 Front: IS TOY 165 Splits or *IS TOY 165 TWU if no factory tweeter podsRear: IC TOY 165 Coaxial Sub:Subwoofer: PSB 200 8inch Subwoofer Mounted in Sealed EnclosureAmplifier: Impulse4.320 Power 2x55WattsRMS to Front Speakers, 1x160WattsRMS to SubwooferCables: IW IMP 2.1, IW TOY Y ISO 2006-2019 or IW TOY V2 Y ISO 2020-2023   AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process.   HARNESSES: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. AND: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.   

Introducing RubberTree Deep Dish Floor Liners . Whether its just the day to day city drive, escaping into the world of adventure or a hard slog on site, these floor liners provide the ultimate vehicle interior protection. Crafted from recycled materials, these floor liners are as tough on mess as they are on environmental impact. They boast 100% waterproof protection, making cleanup a breeze after muddy trails or messy commutes. With vehicle-specific retention clips & precision moulded fit, these liners stay securely in place whilst protecting your footwell interior along every contour. Plus, rest easy with our Wear-through Lifetime Manufacturer's Warranty, guaranteeing long-lasting durability. Keep it simple and elevate your vehicle's interior with RubberTree Deep Dish Floor Liners. Your vehicle deserves the best, and so do you.   Specifications Clips: Vehicle specific retention clips Material: Recycled Material / 100% Waterproof Warranty: Wearthrough lifetime warranty Fitment: 3D scanned for precision fit Size: Full set, 5 Seats  

Introducing RubberTree Deep Dish Floor Liners . Whether its just the day to day city drive, escaping into the world of adventure or a hard slog on site, these floor liners provide the ultimate vehicle interior protection. Crafted from recycled materials, these floor liners are as tough on mess as they are on environmental impact. They boast 100% waterproof protection, making cleanup a breeze after muddy trails or messy commutes. With vehicle-specific retention clips & precision moulded fit, these liners stay securely in place whilst protecting your footwell interior along every contour. Plus, rest easy with our Wear-through Lifetime Manufacturer's Warranty, guaranteeing long-lasting durability. Keep it simple and elevate your vehicle's interior with RubberTree Deep Dish Floor Liners. Your vehicle deserves the best, and so do you.   Specifications Size: Full Set - 1st & 2nd Row Clips: Vehicle specific retention clips Material: Recycled Material / 100% Waterproof Warranty: Wearthrough lifetime warranty Fitment: 3D scanned for precision fit Compatible Vehicles TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up TOYOTA HILUX 8th GEN 08/18-07/20 4Dr C/Chas & Pick Up TOYOTA HILUX 8th GEN 08/20-03/24 4Dr C/Chas & Pick Up TOYOTA HILUX 8th GEN 08/20-10/22 4Dr Pick Up Rogue/Rocco TOYOTA HILUX 8th GEN 11/22-On 4Dr Pick Up Rogue/Rocco