
Front Runner
FRONT RUNNER Ineos Grenadier (2022-Current) Slimline Ii 3/4 Roof Rack Kit - KRIG007T
$2,622.00
$2,913.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Ineos Grenadier contains Slimline II Tray and Wind Deflector, 6 Gutter Mount legs, as well as 8 Ineos Grenadier Grab Handle brackets for mounting the Tray to the vehicle. This kit has space for mounting one Front Runner table or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRIG007T - Ineos Grenadier (2022-Curr) Slimline II 3/4 Roof Rack KitConsisting of:1x FAIG001 - Ineos Grenadier Grab Handle Brackets3x LASS040 - Leg Spacer 10mm (Pair)3x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 46.38kg (102.25lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 330mm (13")Shipping Weight:Weight: 48kg (106lbs)

Front Runner
FRONT RUNNER Ineos Grenadier (2022-Current) Slimline Ii Roof Rack Kit - KRIG006T
$3,227.00
$3,585.00
This 2570mm/109.1" long full-size Slimline II cargo carrying roof rack kit for the Ineos Grenadier contains Slimline II Tray and Wind Deflector, 8 Gutter Mount legs, as well as 8 Ineos Grenadier Grab Handle brackets for mounting the Tray to the vehicle. This kit has space for mounting one Front Runner table or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRIG006T - Ineos Grenadier (2022-Current) Slimline II Roof Rack KitConsisting of:1x FAIG001 - Ineos Grenadier Grab Handle Brackets4x LASS040 - Leg Spacer 10mm (Pair)4x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)1x RRSTP13 - SLII Tray - 1575mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 57.26kg (126.24lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 330mm (13")Shipping Weight:Weight: 58kg (128lbs)

Front Runner
FRONT RUNNER Ineos Grenadier Quartermaster (2023-Current) Roller Tonneau Cover Slimline Ii Load Bed Rack Kit - KRIG005T
$1,531.00
$1,701.00
Get your Ineos Grenadier Quartermaster Double Cab ready for every type of cargo-carrying duty imaginable with the tough Slimline II Load Bed Rack Kit, when fitted with a Roller Tonneau Cover. Did you know there are 55+ accessories for this modular rack?
This kit creates a full size rack that sits above your Ineos Grenadier Quartermaster truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 feet that fit into the existing tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRIG005T - Ineos Grenadier Quartermaster (2023-Current) Roller Tonneau Cover Slimline II Load Bed Rack Kit
Consisting of:
3x FASS016 - Flat Feet (pair) / 65mm
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 25.34kg (55.87lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 255mm (10")
Shipping Weight:
Weight: 30kg (66lbs)

Front Runner
FRONT RUNNER Ineos Grenadier Quartermaster (2023-Current) Slimline Ii 1/2 Roof Rack Kit - KRIG004T
$1,531.00
$1,701.00
Turn your Ineos Grenadier Quartermaster Double Cab into the ultimate gear with this tough Slimline II Roof Rack kit. Now it can go anywhere while carrying a decent load of camping or sports gear on the roof rack at the same time.
This 954mm/37.6" long, 1/2 size, Slimline II cargo carrying roof rack kit for your Ineos Grenadier Quartermaster contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.Installs easily with no drilling required.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRIG004T - Ineos Grenadier Quartermaster (2023-Current) Slimline II 1/2 Roof Rack Kit
Consisting of:
3x LASS040 - Leg Spacer 10mm (Pair)
3x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)
1x RRSTP05 - SLII Tray - 1575mm(W)X954mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.82kg (54.72lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 295mm (12")
Shipping Weight:
Weight: 30kg (66lbs)

Front Runner
FRONT RUNNER Ineos Grenadier Quartermaster (2023-Current) Slimline Ii Roof Rack Kit - KRIG003T
$2,129.00
$2,365.00
To turn your Ineos Grenadier Quartermaster Double Cab into even more of a gear-carrying utility vehicle, it needs this tough full-size Slimline II Roof Rack kit. Then it can go anywhere with the necessary camping, overland or sports gear on the roof rack.
This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for your Ineos Grenadier Quartermaster contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle.All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
Installs easily with no drilling required.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRIG003T - Ineos Grenadier Quartermaster (2023-Current) Slimline II Roof Rack Kit
Consisting of:
4x LASS040 - Leg Spacer 10mm (Pair)
4x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair)
1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 34.98kg (77.12lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 295mm (12")
Shipping Weight:
Weight: 40kg (88lbs)

Front Runner
FRONT RUNNER Ineos Grenadier Storage System - SSIG002
$651.00
$723.00
Prepare your Grenadier for heavy-duty gear-carrying tasks with the user-friendly Ineos Grenadier Storage System. Our durable, Wolf Pack Pro boxes effortlessly fit into the storage system, making it a breeze to store kitchen supplies, dried goods, clothes, tools, and camera gear.
This storage system is designed for the Ineos Grenadier. It includes 1 storage unit, top deck , brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This system does not make use of the Carabiners and Turn buckles. It is fastened to the vehicle using OEM Mounting Points and bolts that we supply.
All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Note: Wolf Pack Pros are sold separately.Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.Note: This Ineos Grenadier Storage System is not compatible with the Utility wagon model.
1 x Storage Unit Frame2 x Top Deck3 x Completion DeckInstallation HardwareFitting Instructions
Materials used:Black powder-coated aluminium and steelCarpet plywood
Product Dimensions:785mm (30.9") L x 1335mm (52.6") W x 283mm (11.1") H
Weight:11.7kg (25.8lbs)
Special Note:80kg (176.4lbs) top deck load capacity

Front Runner
FRONT RUNNER Inter-Slat Brackets - RRAC034
$66.00
$73.00
If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next to a joiner.
These brackets can also be used to position a Front Runner Single Jerry Can holder between slats, parallel to the slats.
For additional information, see the Installation Instructions in the INSTALLATION TAB to determine if you need this product when adding additional slats to your Slimline II roof rack.
**If building a solid platform on your Slimline II and you need these brackets, note that the slats used in conjunction with the bracket will need to be ONE SIZE SMALLER than the slats used in your rack.
FOR USE WITH THE SINGLE JERRY CAN HOLDER:
The Front Runner Single Jerry Can Holder is designed to be mounted perpendicular ACROSS 2 slats. If you'd like to mount a single jerry can holder PARALLEL to the slats, you will need to use these brackets.
Consists of:2 x Inter-Slat Brackets2 x Slat End CapsInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steelProduct Dimensions:227mm (8.9") L x 120mm (4.7") W x 25mm (1") HWeight:1.2kg (2.7lbs)

Front Runner
FRONT RUNNER International Scout Ii (1971-1980) Slimline Ii Roof Rack Kit - KRIS001T
$2,223.00
$2,470.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the International Scout II contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRIS001T - International Scout II (1971-1980) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS027 - Leg Spacer 6mm (Pair) - by Front Runner
4 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 34kg (75lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 255mm (10")
Shipping Weight:
Weight 39.8kg (87.5lbs)

Front Runner
FRONT RUNNER International Travelall (1969-1975) Slimline Ii Roof Rack Kit - KRIT002T
$2,877.00
$3,197.00
This 2570mm/109.1" long, full-size, Slimline II cargo carrying roof rack kit for the International Travelall contains a Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRIT002T - International Travelall (1969-1975) Slimline II Roof Rack KitConsisting of:1x LASD105 - No 5 Leg Diagonal 190mm (Pair)2x LASS027 - Leg Spacer 6mm (Pair)2x LASS040 - Leg Spacer 10mm (Pair)2x LASS103 - No 3 Leg 155mm (Pair)1x LASS104 - No 4 Leg 170mm (Pair)1x RRSTP13 - SLII Tray - 1575mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 44kg (97lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 265mm (10")Shipping Weight:Weight: 44kg (97lbs)

Front Runner
FRONT RUNNER Isuzu D-Max (2012-Current) Egr Rolltrac Load Bed Load Bar Kit - KRRT006
$544.00
$604.00
Clear your bed space and still haul your adventure gear and toys over your Isuzu D-Max EGR RollTrac roll cover.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Isuzu D-Max when fitted with a EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRRT006 - Isuzu D-Max (2012-Current) EGR RollTrac Load Bed Load Bar Kit - by Front RunnerConsisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK017 - Roof Load Bar Pair 1475mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.24kg (18.17lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1585mm (62")Height: 165mm (6")Shipping Weight:Weight: 8.6kg (19lbs)

Front Runner
FRONT RUNNER Isuzu D-Max (2012-Current) Egr Rolltrac Slimline Ii Load Bed Rack Kit - KRRT038T
$1,725.00
$1,917.00
This kit creates a full-size rack that sits above your Isuzu D-Max's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT038T - Isuzu D-Max (2012-Current) EGR RollTrac Slimline II
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.46kg (67.15lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 240mm (9")
Shipping Weight:
Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER Isuzu D-Max (2020-Current) Slimline Ii Roof Rack Kit / Low Profile - KRID013T
$1,497.00
$1,663.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Isuzu D-Max. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRID013T - Isuzu D-Max (2020-Current) Slimline II Roof Rail Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FAIK003 - Isuzu D-Max (2020-Curr) Foot Rails / Low Profile
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.42kg (62.66lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 30kg (66lbs)

Front Runner
FRONT RUNNER Isuzu D-Max (2020-Current) Slimsport Rack 40In Light Bar Wind Fairing - RRAC309
$93.00
$103.00
Get ready to see the light when you fit the Slimsport Rack 40" Light Bar Wind Fairing to your Isuzu D-Max pick up. The Wind Fairing helps the air to flow up and over your rack and accessories. It also reduces rack noise and improves aerodynamics and fuel consumption; it has been designed to work in conjunction with a 40" Light Bar (not included).
Lightbar wind fairing for Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing
1 x Fitting Instructions
Installation Hardware
Materials used:
Black power coated steel
Product Dimensions:
1135mm (44.7") L x 143mm (5.6") W x 115mm (4.5") H
Weight:
2kg (4.4lbs)

Front Runner
FRONT RUNNER Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit - KSID003T
$975.00
$1,083.00
Turn your reliable Isuzu into a gear carrier of note with this low-profile Slimsport Rack. The rack is extremely quiet, thanks to the included wind fairing. You can fit our wide range of accessories to the top of the rack.
This low profile flat deck Slimsport rack has a load-carrying area of 1415mm (55.7") x 1141mm (44.9").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: No drilling required
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSID003T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray
1x RRAC310 - Isuzu Dmax (2020-Current) Slimsport Rack Wind Fair
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1415mm (55.7") L x 1141mm (45") W x 121mm (4.8") H
Approximate Installed Weight: 19.68kg (43.39lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 27kg (59lbs)

Front Runner
FRONT RUNNER Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSID002T
$975.00
$1,083.00
Get your Isuzu D-Max ready for all adventure types and gear-carrying assignments with this low-profile Slimsport Roof Rack Kit/Lightbar Ready. Now, you can mount various accessories onto the rack's super-strong slats via the T-slots.
This low-profile flat deck Slimsport rack has a load carrying area of 1410mm (55.5") x 1141mm (44.9").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Isuzu D-Max (2020-Current) Slimsport Rack is the Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing that has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Note: Only compatible with rear factory antenna or when no front antenna is fitted.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSID002T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray
1x RRAC309 - Isuzu D-Max (20-current) Lightbar Windfairing
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 18.75kg (41.34lbs)
Assembled Rack Kit Dimensions:
1410mm (55.5") L x 1140mm (44.9") W x 125mm (4.9") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 24kg (53lbs)

Front Runner
FRONT RUNNER Isuzu D-Max (2020-Current) Slimsport Wind Fairing - RRAC310
$93.00
$103.00
Get much more out of the Slimsport Roof Rack on your Isuzu D-Max with this super useful Wind Fairing. It reduces fuel consumption, noise and drag while pushing the air up and over the rack and gear.
A wind fairing for the Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 X Wind Fairing
1 X Wind Fairing Mid Support
2 X Wind Fairing Side Support Brackets (Left & Right Hand side)
2 X Light Bar Bracket High Profile (Left & Right Hand side)
2 X Light Bar Bracket Low Profile (Left & Right Hand side)
Installation Hardware
Fitment Guide
Materials used:
Black powder-coating high strength steel
Product Dimensions:
166mm (6.5") L x 1148mm (45.2") W x 160mm (6.3") H
Weight:
2.77Kg (6.1lbs)

Front Runner
FRONT RUNNER Isuzu D-Max Rg 3Rd Gen Extended Cab (2020-Current) Slimline Ii Roof Rack Kit / Low Profile - KRID014T
$1,123.00
$1,248.00
Gear up your Isuzu D-MAX RG 3rd Gen Extended Cab for any adventure and hauling cargo with the Slimline II Roof Rack. This versatile, off-road tough roof rack is compatible with a wide range of accessories, allowing you to customize it to suit your lifestyle, adventures, and cargo-hauling needs. This particular roof rack kit features Low Profile Foot Rails to help minimize drag and reduce noise when carrying loads of all kinds.
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and two (2) Low Profile Foot Rails to mount the Slimline II Tray to your Isuzu D-MAX RG 3rd Gen Extended Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRID014T - Isuzu D-MAX RG 3rd Gen Extended Cab (2020-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FAIK004 - Isuzu D-MAX RG 3rd Gen Ex Cab (2020-Current) Foot Rails
1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 19.36kg (42.68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 19.36kg (43lbs)

Front Runner
FRONT RUNNER Isuzu D-Max Rg/3Rd Gen (2020-Current) Slimline Ii Roof Rack Kit - KRID011T
$1,493.00
$1,659.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu D-Max. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount table (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRID011T - Isuzu D-MAX RG/3rd Gen (2020-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAIK002 - Isuzu D-Max/Mazda BT 50 (2020-Current) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.67kg (63.21lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 27.57kg (61lbs)

Front Runner
FRONT RUNNER Isuzu D-Max Rt50/85/2Nd Gen Dc (2011-Current) Slimline Ii Roof Rack Kit - KRID008T
$1,421.00
$1,579.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu Double Cab. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This Rack Kit is not suitable for 2019 - current RG01 and SX Models.
Features
KRID008T - Isuzu D-Max RT50/85/2nd Gen DC (2011-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAIK001 - Isuzu D-Max RT50/85 2nd Gen (2011-Current) Foot Rails
1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.16kg (62.08lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 28.45kg (63lbs)

Front Runner
FRONT RUNNER Isuzu D-Max X-Terrain (2020-Current) Roll Top Slimline Ii Load Bed Rack Kit - KRID010T
$1,346.00
$1,495.00
This kit creates a full size rack that sits above your Isuzu D-Max X-Terrain's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1156mm) and 4 feet that fit into the existing tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRID010T - Isuzu D-Max X-Terrain (2020-Current) Roll Top Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2x FASS016 - Flat Feet (pair) / 65mm2x RRAC962 - Track Mount Stud Plate1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.43kg (51.65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 24kg (53lbs)

Front Runner
FRONT RUNNER Isuzu Dmax X-Terrain (2020-Current) Slimline Ii Load Bed Rack Kit - KRID015T
$1,754.00
$1,949.00
This kit creates a full-size rack that sits above your Isuzu DMax X-Terrain's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1358mm) and 6 Pickup Roll Top/Top Mount Legs that fit into the existing Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRID015T - Isuzu DMax X-Terrain (2020-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount3x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 25.28kg (55.73lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 255mm (10")
Shipping Weight:
Weight: 29kg (64lbs)

Front Runner
FRONT RUNNER Isuzu Mu-X (2017-2020) Slimline Ii Roof Rack Kit - KRIM001T
$2,024.00
$2,249.00
This 1964mm/77.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu MU-X. Easily installs using the existing factory mounting points. No drilling required.Note: This Rack Kit is only suitable for vehicles that are equipped with existing roof rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack (such as Front Runner tables).
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRIM001T - Isuzu MU-X (2017-2020) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAIM001 - Isuzu MU-X Foot Rails - by Front Runner
1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 34kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 240mm (9")
Shipping Weight:
Weight 39.3kg (86.5lbs)

Front Runner
FRONT RUNNER Isuzu Mu-X (2021-Current) Slimline Ii Roof Rack Kit - KRIM002T
$1,970.00
$2,189.00
This 1964mm/77.3" long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your 2021-Current Isuzu MU-X.
Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
Openings on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty.*
Features
KRIM002T - Isuzu MU-X (2021-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAIM002 - Isuzu MU-X (2021 - Current) Foot Rails
1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37.73kg (83.18lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 39kg (86lbs)

Front Runner
FRONT RUNNER Jack Rattle Stops - REQU077
$30.00
$33.00
Consists of:1 x Rubber Sleeve Materials used: Cold cure elastomer polymer plastic Product Dimensions:190mm (7.5) L x 155mm (6.1) W x 45mm (1.8) HWeight:0.13kg (0.3lbs)

Front Runner
FRONT RUNNER James Baroud Quick Release Tent Channel Set - TBMK013
$16.00
$18.00
A set of plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 4 Piece (TBMK012).
These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes.
The Quick Release Tent Mount Kit / 4 Piece (TBMK012) gives you the freedom to mount or remove the tent in seconds, and with no tools.
Note: Only compatible with TBMK012.
For use with TBMK019 , TBMK020 and TBMK021 please use TBMK031 and TBMK032
Features
Consists of:
1 x Set of Nut Plates
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
85mm (3.3") L x 23.5mm (0.9") W x 5mm (0.2") H (Single Nut Plate)
Weight:
0.35kg (0.77lbs)

Front Runner
FRONT RUNNER James Baroud Quick Release Tent Channel Set / 4 Piece - TBMK034
$36.00
$40.00
A set of 4 plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 4 Piece.
These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes.
The Quick Release Tent Mount Kit / 4 Piece gives you the freedom to mount or remove the tent in seconds, and with no tools.
NOTE: Please refer to the channel plate dimensions to ensure correct selection and fitment.
Features
Consists of:
2 x pair of Nut Plates
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
85mm (3.4") L x 22.5mm (0.9") W x 4mm (0.16") H (Single Nut Plate)
Weight:
0.7kg (1.5lbs)

Front Runner
FRONT RUNNER James Baroud Quick Release Tent Channel Set / 6 Piece - TBMK035
$54.00
$60.00
A set of 6 plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 6 Piece.
These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes.
The Quick Release Tent Mount Kit / 6 Piece gives you the freedom to mount or remove the tent in seconds, and with no tools.
NOTE: Please refer to the channel plate dimensions to ensure correct selection and fitment.
Features
Consists of:
3 x pair of Nut Plates
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
85mm (3.4") L x 22.5mm (0.9") W x 4mm (0.16") H (Single Nut Plate)
Weight:
1.05kg (2.3lbs)

Front Runner
FRONT RUNNER Jeep Cherokee Sport Load Bar Kit /Gutter Mount - KRJC006
$465.00
$517.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRJC006 - Jeep Cherokee Sport Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1445mm (57")
Height 175mm (7")
Shipping Weight:
Weight 8.2kg (18.1lbs)

Front Runner
FRONT RUNNER Jeep Cherokee Sport Xj Slimline Ii Roof Rack Kit - KRJC002L
$1,936.00
$2,151.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJC002L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight 30kg (67lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.2kg (77.5lbs)

Front Runner
FRONT RUNNER Jeep Cherokee Sport Xj Slimline Ii Roof Rack Kit / Tall - KRJCT02L
$1,953.00
$2,170.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.65kg (67.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 35.26kg (78lbs)

Front Runner
FRONT RUNNER Jeep Cherokee Sport Xj Slimline Ii Roof Rack Kit / Tall - KRJCT02L
$1,953.00
$2,170.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.65kg (67.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 35.26kg (78lbs)

Front Runner
FRONT RUNNER Jeep Gladiator (2019-Current) Fold-Top Slimline Ii Bed Rack Kit - KRJG013T
$1,922.00
$2,136.00
This kit creates a full-size rack that sits above your Jeep Gladiator's truck bed with a Fold-Top cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 6 Pickup Roll Top/Top Mount Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRJG013T - Jeep Gladiator (2019-Current) Fold-Top Slimline II Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRAC002 - Universal Track / 1400mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.95kg (72.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 280mm (11")
Shipping Weight:
Weight: 34kg (75lbs)

Front Runner
FRONT RUNNER Jeep Gladiator (2019-Current) Pro Bed Rack Kit - PBJG001T
$2,409.00
$2,677.00
Up your Jeep Gladiator's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the load bed of your Jeep. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Jeep Gladiator load bed.
Included in this Kit is the a 1225mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories,Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and the bed of your truck.
Secures to the bed of the Jeep Gladiator with specific mounting brackets bolted to the existing factory mounting points.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
PBJG001T - Jeep Gladiator (2019-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 101.86kg (224.56lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1720mm (68")
Height: 510mm (20")
Shipping Weight:
Weight: 112kg (246lbs)

Front Runner
FRONT RUNNER Jeep Gladiator (2019-Current) Pro Bed System - PBJG001S
$1,079.00
$1,199.00
This tough, lightweight steel and aluminum system secures to the load bed of your Jeep Gladiator, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit several accessories to its sides or even a Front Runner rack. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system you can take along all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Jeep Gladiator load bed.
The Pro Bed System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket or Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the bed of your truck.
Secures to the load bed of the Jeep Gladiator with specific mounting brackets bolted to the existing factory mounting points.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
Features
PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBJG001 - Pro Bed Rack Jeep Gladiator mount bracket
2x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 81.09kg (178.77lbs)
Shipping Dimensions:
Width: 670mm (26")
Length: 1275mm (50")
Height: 345mm (14")
Shipping Weight:
Weight: 83kg (183lbs)

Front Runner
FRONT RUNNER Jeep Gladiator (2020-Current) Egr Rolltrac Load Bed Load Bar Kit - KRRT012
$526.00
$584.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Jeep Gladiator when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1345mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT012 - Jeep Gladiator (2020-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK015 - Roof Load Bar Pair 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.66kg (16.89lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1460mm (57"); Height: 165mm (6")
Shipping Weight:
Weight: 8.2kg (18lbs)

Front Runner
FRONT RUNNER Jeep Gladiator (2020-Current) Egr Rolltrac Slimline Ii Load Bed Rack Kit - KRRT044T
$1,644.00
$1,827.00
This kit creates a full-size rack that sits above your Jeep Gladiator's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT044T - Jeep Gladiator (2020-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.55kg (62.94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 240mm (9")
Shipping Weight:
Weight: 28.8kg (63lbs)

Front Runner
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Cab Over Camper Slimline Ii Roof Rack Kit - KRJG010T
$1,637.00
$1,819.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Please see the fitment instructions in the INSTALL tab for further installation information.
Features
KRJG010T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount
1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini
1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.94kg (66.01lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 530mm (21")
Length: 1730mm (68")
Height: 380mm (15")
Shipping Weight:
Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Cab Over Camper Slimline Ii Roof Rack Kit - KRJG016T
$1,691.00
$1,879.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Please see the fitment instructions in the INSTALL tab for further installation information.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJG016T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini
1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 22.24kg (49.03lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 325mm (13")
Shipping Weight:
Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Extreme Slimline Ii Roof Rack Kit - KRJG014T
$2,253.00
$2,503.00
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep Gladiator JT including the Slimline II Tray (1425mm x 1560mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The Jeep Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJG014T - Jeep Gladiator JT (2019-Current) Extreme Slimline II Roof Rack Kit
Consisting of:
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x FAJT001 - Jeep Gladiatorr JT (2019-Curr) Foot Rails
1x FAJT002 - Jeep Gladiator (2019-Curr) Inner Brackets
1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.22kg (71.03lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 315mm (12")
Shipping Weight:
Weight: 41kg (90lbs)

Front Runner
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Load Bed Load Bar Kit - KRJG003
$507.00
$563.00
If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution.
This kit is designed to work with the existing Jeep Gladiator JT factory bed rails and comes with a pair of 1425mm wide Front Runner Load Bars, 2 pairs of Front Runner Tall Load Bed Legs, and all the necessary hardware required to mount to the factory bed rails.
The Front Runner Load Bar Kit features 22mm thick HD aluminum extrusions (slats) that are used in the Slimline II Roof Rack, which means that these load bars can be used as slats in a similar width Slimline II Roof Rack.
Additionally, the sliding nut t-slots on the slats allow for unlimited and ultra-secure mounting positions, and accessories and equipment can be quickly removed as well.
Features
KRJG003 - Jeep Gladiator JT (2019-Current) Load Bed Load Bar Kit
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LBSK016 - Roof Load Bar Pair 1425mm(W)1x RRAC901 - Load Bed Nut Kit- Toyota Tacoma 2004+/Tundra 2007+
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.57kg (16.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 200mm (8"); Length: 1530mm (60"); Height: 130mm (5")
Shipping Weight:
Weight: 8kg (18lbs)

Front Runner
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Rsi Smart Canopy Slimline Ii Rack Kit - KRCA092T
$1,417.00
$1,575.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Jeep Gladiator JT RSI Smart Canopy contains a Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.65kg (54.34lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 155mm (6")Shipping Weight:Weight: 25kg (55lbs)

Front Runner
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Slimline Ii Load Bed Rack Kit - KRJG002T
$1,524.00
$1,693.00
This kit creates a full-size rack that sits above your Jeep Gladiator JTs load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 4 Pickup Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG002T - Jeep Gladiator JT (2019-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (52lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 280mm (11")
Shipping Weight:
Weight 27.6kg (60.7lbs)

Front Runner
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Slimline Ii Roof Rack Kit - KRJG009T
$1,405.00
$1,561.00
This 954mm/37.6" long, full-size, Slimline II cargo carrying roof rack kit for your Jeep Gladiator JT contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG009T - Jeep Gladiator JT (2019-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x LASS027 - Leg Spacer 6mm (Pair)
3x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair)
1x RRSTM05 - SLII Tray - 1475mm(W)X954mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.9kg (54.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 25.4kg (56lbs)

Front Runner
FRONT RUNNER Jeep Grand Cherokee Wk2 (2011-2021) Slimline Ii Roof Rack Kit - KRJG011T
$1,654.00
$1,838.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Jeep Grand Cherokee WK2 contains the Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG011T - Jeep Grand Cherokee WK2 (2011-2021) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x FASS012 - Foot Set / 40mm - 50mm
1x FASS013 - Foot Set / 60mm - 70mm
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
1x TRJG004 - Jeep Grand Cherokee WKII (2011-2020) Tracks/1450mm
1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.56kg (62.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 29kg (64lbs)

Front Runner
FRONT RUNNER Jeep Grand Cherokee Wk2 (2011-2021) Slimline Ii Roof Rack Kit - KRJG012T
$1,892.00
$2,102.00
This 1560mm/61.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Jeep Grand Cherokee WK2. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
An opening on the Foot Rails allows access to Front Runner under rack mount tables (either 1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG012T - Jeep Grand Cherokee WK2 (2011-2021) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAJG001 - Jeep Grand Cherokee Foot Rails
1x RRAC976 - Jeep Grand Cherokee WKII (2011-2020) Instal Kit
1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)
1x TRJG004 - Jeep Grand Cherokee WKII (2011-2020) Tracks/1450mm
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.25kg (77.71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 310mm (12")
Shipping Weight:
Weight: 36kg (79lbs)

Front Runner
FRONT RUNNER Jeep Liberty Kk (2008-2012) Slimline Ii Roof Rack Kit - KRJL003T
$1,618.00
$1,798.00
This 1560mm/61.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Jeep Liberty KK. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJL003T - Jeep Liberty KK (2008-2012) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAJL001 - Jeep Liberty KK (2008-2012) Foot Rails - by Front Runner
1 x RRSTG08 - Slimline II Tray - 1345mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 720mm (28")
Height 300mm (12")
Shipping Weight:
Weight 32.9kg (72.4lbs)

Front Runner
FRONT RUNNER Jeep Wrangler 4Xe (2021-Current) Extreme Slimline Ii Roof Rack Kit - KRJW039T
$3,172.00
$3,524.00
The Jeep Wrangler 4xe Extreme mounting system bolts to existing mounting points on the chassis and roll cage. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place. The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails allow for a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table) to be fitted.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This Kit is not Suitable for the Mojave Edition
KRJW039T - Jeep Wrangler 4xe (2021-Current) Extreme Slimline II Roof Rack KitConsisting of:1x FAJL002 - Jeep Wrangler JL (2018-Curr) Foot Rails1x FAJL003 - Jeep Wrangler JL (2018-Curr) Inner Brackets1x FAJL008 - Jeep Wrangler JL/4xe(18-Curr)Front Bar RRack Mount1x RRSTJ12 - SLII Tray - 1425mm(W)X2368mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.64kg (100.62lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 410mm (16")Shipping Weight:Weight: 53kg (117lbs)

Front Runner
FRONT RUNNER Jeep Wrangler 4Xe (2021-Current) Slimline Ii 1/2 Roof Rack Kit - KRJW031T
$1,786.00
$1,984.00
This 1358mm/53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit for your Jeep Wrangler 4xe contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle.
Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRJW031T - Jeep Wrangler 4xe (2021-Current) Slimline II 1/2 Roof Rack KitConsisting of:2x LASS027 - Leg Spacer 6mm (Pair)4x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30kg (66.14lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 265mm (10")Shipping Weight:Weight: 31.6kg (70lbs)

Front Runner
FRONT RUNNER Jeep Wrangler 4Xe (2021-Current) Slimline Ii 1/2 Roof Rack Kit / Tall - KRJW030T
$1,766.00
$1,962.00
This 1358mm/53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit for your Jeep Wrangler 4xe contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJW030T - Jeep Wrangler 4xe (2021-Current) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
1x LASS027 - Leg Spacer 6mm (Pair)4x LASS036 - Jeep JL/JT Mounting Leg / 170mm (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.7kg (72.09lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")
Shipping Weight:
Weight: 32kg (70lbs)

Front Runner
FRONT RUNNER Jeep Wrangler Jk 2 Door (2007-2018) Extreme Slimline Ii 1/2 Roof Rack Kit - KRJW002T
$1,442.00
$1,602.00
This Slimline II 1/2 rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 2 door 2007-2018 including the Slimline II Tray (1425mm x 954mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The JK Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
Features
KRJW002T - Jeep Wrangler JK 2 Door (2007-2018) Extreme Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FAJK010 - Jeep Wrangler JK 2 Door New Foot Rails - by Front Runner
1 x FAJK011 - Jeep Wrangler JK 2 Door New Inner Brackets - by Front Runner
1 x RRSTJ05 - Slimline II Tray - 1425mm(W) X 954mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 250mm (10")
Shipping Weight:
Weight 28.4kg (62.6lbs)