FRONT RUNNER Mahindra Scorpio Load Bar Kit / Gutter Mount...
$502.20
$558.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMS003 - Mahindra Scorpio Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1545mm (61")
Height 175mm (7")
Shipping Weight:
Weight 8.9kg (19.7lbs)
FRONT RUNNER Maxtrax Mkii / Black - REQU122
$265.50
$295.00
These lightweight and tough MAXTRAX MKII recovery devices use integrated teeth that grip into a tyre's/tire's tread to provide traction in sand, mud or snow.
A pair of lightweight, easy-to-use vehicle recovery and extraction devices that ensure an easy way out.
Large cleats on MAXTRAX MKII grip into the tyre tread and the terrain under your vehicle to prevent it from slipping back into sand, mud, or snow.
Made of UV-stabilized, flexible and tough engineering-grade reinforced nylon.
Nesting design ensures MaxTax can be stacked and stored compactly to increase load capacity.
Store MAXTRAX MKII with your camping, over-landing, or four-wheel drive gear on your Slimline II rack in two different configurations. Recovery Device & Gear Holding Side Brackets for side profile mounting options or above and below with the Slimline II rack with Recovery Device Mounting Kit (sold separately).
Six (6) integrated carrying handles make MAXTRAX MKII easy to carry and the double-edged design ensures quick and easy maneuvering under your tires.
Features a shovel at either end for removing excess earth and keyhole points to secure your MAXTRAX MKII.
MAXTRAX MKII are linkable, creating longer tracks using the supplied leashes.
Consists of:1 x Pair of MAXTRAX MKII Recovery Devices2 x LeashesMaterials used:UV-stabilized, flexible, super tough engineering-grade reinforced nylonProduct Dimensions:1150mm (45") L x 330mm (13") W x 85mm (3.5") H (Per set of 2 Stacked)Weight:3.4kg (7.5lbs)6.8kg (15lbs) (Pair)Product Colour:BlackSpecial NotesSKU; LUMENO373
FRONT RUNNER Maxtrax Mkii / Orange - REQU119
$265.50
$295.00
These advanced 4WD, lightweight and tough MAXTRAX MKII recovery devices use integrated teeth that grip into a tyre's/tire's tread to provide traction in sand, mud or snow.
A pair of lightweight, easy-to-use vehicle recovery and extraction devices that ensure an easy way out.
Large cleats on MAXTRAX MKII grip into the tyre tread and the terrain under your vehicle to prevent it from slipping back into sand, mud, or snow.
Made of UV-stabilized, flexible and tough engineering-grade reinforced nylon.
Nesting design ensures MAXTRAX MKII can be stacked and stored compactly to increase load capacity.
Store MAXTRAX MKII with your camping, over-landing, or four-wheel drive gear on your Slimline II rack in two different configurations. Recovery Device & Gear Holding Side Brackets for side profile mounting options or above and below with the Slimline II rack with Recovery Device Mounting Kit (sold separately).
Six (6) integrated carrying handles make MAXTRAX MKII easy to carry and the double-edged design ensures quick and easy maneuvering under your tires.
Features a shovel at either end for removing excess earth and keyhole points to secure your MAXTRAX MKII.
MAXTRAX MKII are linkable, creating longer tracks using the supplied leashes.
Consists of:1 x Pair of MAXTRAX MKII Recovery Devices2 x LeashesMaterials used:UV-stabilized, flexible, super tough engineering-grade reinforced nylonProduct Dimensions:1150mm (45") L x 330mm (13") W x 85mm (3.5") H (Per set of 2 Stacked)Weight:3.4kg (7.5lbs)6.8kg (15lbs) (Pair)Product Colour:OrangeSpecial NotesSKU; LUMINO370
FRONT RUNNER Mazda Bt50 (2012-2020) Slimline Ii Roof Rack Kit...
$1,489.50
$1,655.00
Clear precious interior and load bed space, and still haul your adventure gear and toys with this Mazda BT50 (2012-2020) Slimline II Roof Rack Kit.
This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mazda BT50. Easily installs using the existing factory mounting points. No drilling required. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFR003 - Ford Ranger T6/Wildtrak (2012-Current) Foot Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.91kg (63.74lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Mazda Bt50 (2012-Current) Egr Rolltrac Load Bed Load...
$569.70
$633.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Mazda BT50 when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT005 - Mazda BT50 (2012-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK017 - Roof Load Bar Pair 1475mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8.24kg (18.17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1590mm (63")
Height: 290mm (11")
Shipping Weight:
Weight: 8.4kg (18lbs)
FRONT RUNNER Mazda Bt50 (2012-Current) Egr Rolltrac Slimline Ii Load...
$1,716.30
$1,907.00
This kit creates a full-size rack that sits above your Mazda BT50's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT040T - Mazda BT50 (2012-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.46kg (67.15lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 240mm (9")
Shipping Weight:
Weight: 31kg (68lbs)
FRONT RUNNER Mazda Bt50 (2020-Current) Slimline Ii Roof Rack Kit...
$1,489.50
$1,655.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mazda BT50. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMB001T - Mazda BT50 (2020-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAIK002 - Isuzu D-Max/Mazda BT 50 (2020-Current) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.67kg (63.21lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 27.57kg (61lbs)
FRONT RUNNER Mazda Bt50 (2020-Current) Slimline Ii Roof Rack Kit...
$1,462.50
$1,625.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and two (2) Low Profile Foot Rails to mount the Slimline II Tray to your Mazda BT50 Double Cab. No drilling required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRMB005T - Mazda BT50 (2020-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FAIK003 - Isuzu D-Max (2020-Curr) Foot Rails / Low Profile1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.13kg (64.22lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 255mm (10")
Shipping Weight:
Weight: 30kg (66lbs)
FRONT RUNNER Mazda Bt50 (2020-Current) Slimsport Roof Rack Kit -...
$974.70
$1,083.00
Get set for customized weekend getaways and sporty adventures with the Mazda BT50 Slimsport Roof Rack Kit. Attach your rack accessories using the T-slots found in the slats. The included wind fairing on this sleek rack ensures rack noise is minimal.
This low profile flat deck Slimsport rack has a load-carrying area of 1413mm (55.6") L x 1141mm (44.9").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Isuzu D-Max / Mazda BT50 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Fitment guide and all mounting hardware included.
Note: Drilling maybe required for some models.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Mazda Bt50 (2020-Current) Slimsport Roof Rack Kit /...
$974.70
$1,083.00
Customized your Mazda BT50 for weekend getaways and sporty adventures with this sleek, lightbar ready, Slimsport Roof Rack Kit. The wind fairing features a 40" cut out to allow the use of the Front Runner 40” LED Slim Light Bar, so your adventures can continue well into the night. This rack kit has over 55 compatible accessories to suit your camping or sporting gear needs.
This low-profile flat deck Slimsport rack has a load carrying area of 1384mm (54.5") x 1141mm (44.9").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included in the Mazda BT50 (2020-Current) Slimsport Rack is the Isuzu D-Max / Mazda BT50 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing that has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling maybe required for some models.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Mazda Bt50 Double Cab (2012-2020) Slimline Ii Roof...
$1,342.80
$1,492.00
This 1156mm/45.5" long, full-size, Slimline II cargo carrying roof rack kit for your Mazda BT50 Double Cab contains the Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMB003T - Mazda BT50 DC (2012-2020) SLII Roof Rack Kit
Consisting of:
1x FASS012 - Foot Set / 40mm - 50mm1x FASS014 - Foot Set - Angled / 65mm1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.49kg (53.99lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18"); Length: 1715mm (68"); Height: 270mm (11")
Shipping Weight:
Weight: 25.4kg (56lbs)
FRONT RUNNER Mercedes-Benz G-Class (2018-Current) Slimline Ii 1/2 Roof Rack...
$1,889.10
$2,099.00
This 1156mm/45.5 long, 1/2 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your G-Class. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMG009T - Mercedes Benz G-Class (2018-Current) SLII 1/2 RR Kit
Consisting of:
1 x FAMG001 - Mercedes Benz G-Class (2019-Current) Foot Rails - by Front Runner
1 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (17.9")
Length 1610mm (63.4")
Height 240mm (9.5")
Shipping Weight:
Weight 32kg (72.5lbs)
FRONT RUNNER Mercedes-Benz G-Class (2018-Current) Slimline Ii Roof Rack Kit...
$2,477.70
$2,753.00
This 1964mm/77.3 long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your G-Class. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMG008T - Mercedes Benz G-Class (2018-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAMG001 - Mercedes Benz G-Class (2019-Current) Foot Rails - by Front Runner
1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 36kg (80lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 240mm (9")
Shipping Weight:
Weight 42.1kg (92.5lbs)
FRONT RUNNER Mercedes-Benz Gelandewagen (1979-2017) Load Bar Kit / Gutter...
$504.00
$560.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 170mm Gutter Mount legs, 2 1475mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGW007 - Mercedes Gelandewagen (1979-2017) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1580mm (62")
Height 175mm (7")
Shipping Weight:
Weight 8.9kg (19.6lbs)
FRONT RUNNER Mercedes-Benz Gelandewagen G Class (1979-2017) Slimline Ii 3/4...
$2,096.10
$2,329.00
This 1964mm/77.3" long 3/4 size Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen G Class contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit is not suitable for under rack table fitment or Hard Shell Tent Mount Brackets.
Features
KRGW001L - Mercedes Gelandewagen G Class (1979-2017) Slimline II 3/4 Roof Rack Kit - by Front Runner
Consisting of:
3x LASS104 - No 4 Leg 170mm (Pair)1x RRSTM10 - SLII Tray - 1475mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37.55kg (82.78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 37.59kg (83lbs)
FRONT RUNNER Mercedes-Benz Gelandewagen G Class (1979-2017) Slimline Ii 3/4...
$2,070.90
$2,301.00
This 1964mm/77.3" long 3/4 size Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen G Class contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRGWT01L - Mercedes Gelandewagen G Class (1979-2017) Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner
Consisting of:
3 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 32kg (71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight: 37.8kg (83.1lbs)
FRONT RUNNER Mercedes-Benz Gelandewagen G Class (1979-2017) Slimline Ii Roof...
$2,437.20
$2,708.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4" (W) x 2368mm/93.2" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTD12 - Slimline II Tray - 1255mm(W) X 2368mm(L) - by Front Runner2 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 35kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1255mm (49")Length 2368mm (93")Height 70mm (3")
Shipping Weight:
Weight 41.1kg (90.4lbs)
FRONT RUNNER Mercedes-Benz Gelandewagen G Class (1979-2017) Slimline Ii Roof...
$2,437.20
$2,708.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen G Class contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRGWT04L - Mercedes Gelandewagen G Class (1979-2017) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
4x LASS027 - Leg Spacer 6mm (Pair)4x LASS106 - No 6 Leg 195mm (Pair)1x RRSTM11 - SLII Tray - 1475mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 43.04kg (94.89lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 43.43kg (96lbs)
FRONT RUNNER Mercedes-Benz Gelandewagen G Class (1979-2018) Ladder - LAMG003
$333.00
$370.00
Easily access the roof rack on your Mercedes-Benz Gelandewagen G Class with this durable four-step ladder. It is made from high-strength steel and can be mounted on either the left or right side.
*NOTE: Ladder not suitable for 2018 - Current models or models with rear fuel filler cap or twin rear wheel carriers.
The ladder allows easy access to the roof rack.
Secures to the rear of the Gelandewagen G Class using the roof gutter channel and the rear body panel of the vehicle.
The top of the ladder clamps onto the gutter channel while the lower section secures with 3M Dual Lock Tape. No drilling is required.
Fits Mercedes-Benz Gelandewagen G Class vehicles, with single or split rear doors.
This ladder is supplied with 2 mounting clamps, for left-hand side or right-hand side fitment.
Components are made of high-strength steel and aluminium and coated in the same weather-resistant black powder coating as the Front Runner rack.
Features
Consists of:
1 x Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminium
Black powder coated steel
Product Dimensions:
943mm (37.1") L x 166mm (6.5") W x 256mm (10.1") H
Weight:
4.4kg (9.7lbs)
FRONT RUNNER Mercedes-Benz Gelandewagen Swb (1979-2011) Slimline Ii Roof Rack...
$1,925.10
$2,139.00
This 1762mm/69.4" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen SWB contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMG004T - Mercedes Gelandewagen SWB (1979-2011) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x RRSTM09 - Slimline II Tray - 1475mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 30kg (66lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1615mm (64")
Height 250mm (10")
Shipping Weight:
Weight 34.9kg (76.8lbs)
FRONT RUNNER Mercedes-Benz Sprinter (L1H1/128In Swb/Standard Roof) (2006-Current) Slimpro Van...
$1,989.90
$2,211.00
Compatible with Mercedes Benz Sprinter L1/H1 / 128"SWB standard roof vans with a vehicle length of 5267mm / 207.4".
Load-carrying area: 2570mmL (101.2") x 1528mmW (60.2").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS001T - Mercedes Benz Sprinter (L1H1/128" SWB/Standard Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF004 - Mercedes Sprinter Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
2x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2570mm (101.2") L x 1528mm (60.2") W x 143mm (5.6") H
Approximate Installed Weight: 15.1kg (33.29lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
FRONT RUNNER Mercedes-Benz Sprinter (L1H2/128In Swb/High Roof) (2006-Current) Slimpro Van...
$1,845.90
$2,051.00
Compatible with Mercedes Benz Sprinter L1/H2 / 128" SWB high roof vans with a vehicle length of 5267mm / 207.4".
Load-carrying area: 2569mm (101.1") x 1470mm (57.9").
Eight (8) Mounting Feet secure into the van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 107mm (4.2") height, or left in standard configuration at 157mm (6.2").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification is required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS006T - Mercedes Benz Sprinter (L1H2/128" SWB/high Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF004 - Mercedes Sprinter Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
2x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 14.54kg (32.06lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 165mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
FRONT RUNNER Mercedes-Benz Sprinter (L2H1/144In Mwb/Standard Roof) (2007-Current) Slimpro Van...
$2,195.10
$2,439.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Mercedes-Benz Sprinter vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with Mercedes-Benz Sprinter L2H1 144" MWB standard roof vans with a vehicle length of 5923mm / 233.2".
Load-carrying area: 3176mm (125") L x 1528mm (60.2").
Twelve (12) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:6x FAVF004 - Mercedes Sprinter Van Rack Foot Set1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit4x RRNS1425 - Narrow Slat / 1425mm (Pair)2x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm LipMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 32.72kg (72.14lbs)Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 38kg (84lbs)
FRONT RUNNER Mercedes-Benz Sprinter (L2H2/144In Mwb/High Roof) (2006-Current) Slimpro Van...
$2,051.10
$2,279.00
Compatible with Mercedes Benz Sprinter L2/H2 / 144"MWB High roof vans with a vehicle length of 5923mm / 233.2".
Load-carrying area: 3176mm (125") L x 1352mmW (53.2").
Twelve (12) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS003T - Mercedes Benz Sprinter (L2H2/144" MWB/High Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
6x FAVF004 - Mercedes Sprinter Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1255 - Narrow Slat / 1255mm (Pair)
2x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
3176mm (125")L x 1352mm (53.2")W x 143mm (5.6")H
Approximate Installed Weight: 30.19kg (66.56lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 38kg (84lbs)
FRONT RUNNER Mercedes-Benz Sprinter (L3H2/170In Lwb/High Roof) (2007-Current) Slimpro Van...
$2,581.20
$2,868.00
Compatible with Mercedes Benz Sprinter (L3H2/170" LWB) (2007-Current) high roof vans with a vehicle length of 6967mm / 274.3".
Load-carrying area: 4130mm (162.6") x 1352mm (53.2").
Fourteen (14) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS004T - Mercedes Benz Sprinter (L3H2/170" LWB/High Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
7x FAVF004 - Mercedes Sprinter Van Rack Foot Set
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
5x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
4130mm (162.6") L x 1352mm (53.2") W x 143mm (5.6") H
Approximate Installed Weight: 18.39kg (40.54lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 47kg (103lbs)
FRONT RUNNER Mercedes-Benz Sprinter (L4H2/170In Xlwb/High Roof) (2007-Current) Slimpro Van...
$2,979.00
$3,310.00
Compatible with 2007-Current Mercedes Benz Sprinter (L4H2/170" XLWB) high roof vans with a vehicle length of 7367mm / 290".
Load-carrying area: 4534mm (178.5") x 1352mm (53.2").
Sixteen (16) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 99mm (3.9") height, or left in standard configuration at 143mm (5.6").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS005T - Mercedes Benz Sprinter (L4H2/170" XLWB/High Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
8x FAVF004 - Mercedes Sprinter Van Rack Foot Set
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
6x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x SPVT004 - Van Rack Side Profile / 1762mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
4534mm (178.5") L x 1352mm (53.2") W x 143mm (5.6")H
Approximate Installed Weight: 19.96kg (44lbs)
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 49.35kg (109lbs)
FRONT RUNNER Mercedes-Benz Sprinter 128In/144In/170In / L1/L2/L3 / Swb/Mwb/Lwb Wheelbase...
$3,188.70
$3,543.00
This 2312mm/91" long, 1/2 Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter (2006+) contains 2 Slimline II Trays, Wind Deflector, Track set and 12 mounting Feet (6 per rack). Drilling is required for installation. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS006T - Mercedes Benz Sprinter (2006-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
6 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
2 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 54kg (119lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1800mm (71")
Height 260mm (10")
Shipping Weight:
Weight 63.1kg (138.9lbs)
FRONT RUNNER Mercedes-Benz Sprinter 128In/144In/170In / L1/L2/L3 / Swb/Mwb/Lwb Wheelbase...
$2,165.40
$2,406.00
This 1560mm/61.4" long, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter (2006+) contains the Slimline II Tray, Wind Deflector, Track set and 6 mounting Feet. Drilling is required for installation. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS005T - Mercedes Benz Sprinter (2006-Current) Slimline II 1/4 Roof Rack Kit - by Front Runner
Consisting of:
3 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1800mm (71")
Height 260mm (10")
Shipping Weight:
Weight 41.2kg (90.7lbs)
FRONT RUNNER Mercedes-Benz Sprinter 144In/170In / L2/L3 / Mwb/Lwb Wheelbase...
$3,091.50
$3,435.00
This 2772mm/109" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter contains Slimline II Tray, Wind Deflector, 2 Tracks and 8 Feet. Drilling is required for installation. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS008T - Merc Benz Sprinter2 Gen(2006-Curr)SLII RR Kit/Tall
Consisting of:
4 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 52.0kg (114.6lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18.0")
Length: 1805mm (71.0")
Height: 255mm (10.0")
Shipping Weight:
52.7kg (116.0lbs)
FRONT RUNNER Mercedes-Benz Sprinter 144In/170In / L2/L3 / Mwb/Lwb Wheelbase...
$2,525.40
$2,806.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter contains Slimline II Tray, Wind Deflector and 8 Feet. It installs easily to factory mounting points with no drilling required. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
This kit requires the OEM Mercedes roof tracks for fitment.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS004T - Merc Sprinter 144"/MWB w/OEM TRK(2006-Curr)SLII RR Kit
Consisting of:
4 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
4 x RRAC907 - Stud Plate MB Sprinter Track
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 39kg (86lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 45.5kg (100.0lbs)
FRONT RUNNER Mercedes-Benz Sprinter 170In/L3/Lwb W/Oem Tracks (2006-Current) Slimline Ii...
$3,162.60
$3,514.00
This 3120mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter (2006-Current) contains 2 Slimline II Trays, Wind Deflector and 12 Feet. Installs easily onto the existing factory/OEM roof tracks with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS002T - Mercedes Benz Sprinter with OEM Tracks (2006-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
6 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
6 x RRAC907 - Stud Plate MB Sprinter Track
2 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 52kg (114lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1615mm (64")
Height 215mm (8")
Shipping Weight:
Weight 60.1kg (132.3lbs)
FRONT RUNNER Mercedes-Benz Sprinter 170In/L3/Lwb Wheelbase W/O Oem Tracks (2006-Current)...
$4,472.10
$4,969.00
This 3928mm/154.7" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter without OEM Tracks, contains 2 Slimline II Trays, Wind Deflector, Track set and 16 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907) Mercedes Benz Sprinter Models only.
Features
KRMS009T - Merc Sprinter170"/LWB w/OEM TRK ('06-Curr)SLII R RKit
Consisting of:
8 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
2 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 77.4kg (170.6lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1800mm (71.0")
Height: 390mm (15.0")
Shipping Weight:
78.4kg (172.0lbs)
FRONT RUNNER Mercedes-Benz Sprinter 170In/L3/Lwb Wheelbase W/O Oem Tracks (2006-Current)...
$4,536.90
$5,041.00
This 3928mm/154.7" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter without OEM Tracks, contains 2 Slimline II Trays, Wind Deflector, Track set and 16 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907) Mercedes Benz Sprinter Models only.
Features
KRMS010T - Mercedes Benz Sprinter 170"/L3/LWB Wheelbase w/o OEM Tracks (2006-Current) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
8x FASS017 - Foot Set / 75mm-85mm
2x RRSTM10 - SLII Tray - 1475mm(W)X1964mm(L)
1x TRMS001 - Mercedes Sprinter (2006-Curr) Tracks/3082-4098mmL
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 78.48kg (173.02lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1800mm (71")
Height: 390mm (15")
Shipping Weight:
Weight: 79.34kg (175lbs)
FRONT RUNNER Mercedes-Benz Sprinter 170In/L3/Lwb Wheelbase W/Oem Tracks (2006-Current) Slimline...
$3,956.40
$4,396.00
This 3928mm/154.7" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter with OEM Tracks, contains 2 Slimline II Trays, Wind Deflector, and 16 Feet. Installs easily to factory mounting points with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907) Mercedes Benz Sprinter Models only.
Features
KRMS011T - Merc Sprinter170"/LWBw/oOEMTRK('06-Curr)SLII RRK/T
Consisting of:
8 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
8 x RRAC907 - Stud Plate MB Sprinter Track
2 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 61kg (135lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 354mm (14")
Shipping Weight:
Weight 71.1kg (156.5lbs)
FRONT RUNNER Mercedes-Benz Sprinter 170In/L3/Lwb Wheelbase W/Oem Tracks (2006-Current) Slimline...
$3,906.00
$4,340.00
This 3928mm/154.7" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter with OEM Tracks, contains 2 Slimline II Trays, Wind Deflector, and 16 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily to factory mounting points with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907) Mercedes Benz Sprinter Models only.
Features
KRMS012T - Merc Sprinter170"/LWBw/o OEM TRK('06-Curr)SLII RRK
Consisting of:
8 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
8 x RRAC907 - Stud Plate MB Sprinter Track
2 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 62kg (136lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 354mm (14")
Shipping Weight:
Weight 72.1kg (158.6lbs)
FRONT RUNNER Mercedes-Benz Sprinter 2Gen/3Gen 170In/L3/Lwb Wheelbase W/O Oem Tracks...
$3,728.70
$4,143.00
This 3120mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter (2006+) contains 2 Slimline II Trays, Wind Deflector, Track set and 12 mounting Feet. Drilling is required for installation. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS007T - Mercedes Benz Sprinter (2006-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
6 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
2 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 62kg (136lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1800mm (71")
Height 260mm (10")
Shipping Weight:
Weight 71.7kg (157.8lbs)
FRONT RUNNER Mercedes-Benz Sprinter H1 Slimpro Van Rack Ladder -...
$413.10
$459.00
A 6 (six) step ladder that provides easy access to your Front Runner Slimpro Van rack.
Secures to the side profile of the Slimpro Van Rack and to the bottom trim of the vehicle.
Made from high-strength steel, aluminum and powder coated in the same durable black powder coating as all Front Runner racks.
Drilling is required on the bottom trim of the vehicle.
All mounting hardware and fitment guide is included.
Load Capacity 110 kg / 242.5 lbs.
Features
Consists of:
1 x Mercedes Sprinter H1 Slimpro Van Rack Ladder
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum and steel
Product Dimensions:
343mm (13.5") L x 235mm (9.3") W x 2066mm (81.3") H
Weight:
7.6 kg (16.8 lbs)
FRONT RUNNER Mercedes-Benz Sprinter H2 Slimpro Van Rack Ladder -...
$457.20
$508.00
A 7 (seven) step ladder that provides easy access to your Front Runner Slimpro Van rack.
Secures to the side profile of the Slimpro Van Rack and to the bottom trim of the Mercedes Sprinter H2.
Made from high-strength steel, aluminum and powder coated in the same durable black powder coating as all Front Runner racks.
Drilling is required on the bottom trim of the vehicle.
All mounting hardware and fitment guide is included.
Load Capacity 110 kg / 242.5 lbs.
Features
Consists of:
1 x Mercedes Sprinter H2 Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminium and steel
Product Dimensions:
455mm (17.9") L x 235mm (9.3") W x 2348mm (92.4") H
Weight:
7.9kg (17.4lbs)
FRONT RUNNER Mercedes-Benz Sprinter Ladder - LAMS002
$468.90
$521.00
Secures to the rear of the Mercedes/Dodge/Freightliner Sprinter and LDV/Maxus Deliver 9 vans.
Simply mounts to the factory door hinges and door face with minimal modification to the vehicle.
Made from high strength steel and powder coated in the same durable black powder coating as all Front Runner racks.
Steps have rubber inserts for added grip when reaching on top of the Sprinter vans roof rack.
Install or remove effortlessly.
Note: Suitable for all low roof, high roof and super high roof vans.
NOTE: *Does not work with 270 Degree opening rear doors.
Features
Consists of:
1 x Mercedes Sprinter / LDV/Maxus Deliver 9 Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
239mm (9.4") L x 413mm (16.3") W x 1645mm (64.8") H
Weight:
7.9kg (17.4lbs)
FRONT RUNNER Mercedes-Benz V-Class L1 (2014-Current) Slimline Ii 1/2 Roof...
$1,696.50
$1,885.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz V-Class L1 2014+. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: The sunroof is not operational if a table is stored.
KRMV025T - Mercedes-Benz V-Class L1 (2014-Current) Slimline II 1/2 Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.85kg (70.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 35kg (77lbs)
FRONT RUNNER Mercedes-Benz V-Class L1 (2014-Current) Slimline Ii Roof Rack...
$2,533.50
$2,815.00
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz V-Class L1 2014+. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: The sunroof is not operational if a table is stored.
KRMV024T - Mercedes-Benz V-Class L1 (2014-Current) Slimline II Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.87kg (101.13lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 48kg (106lbs)
FRONT RUNNER Mercedes-Benz V-Class L2 / Metris 126Wb (2014-Current) Slimline...
$1,727.10
$1,919.00
This 1358mm/ 53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Mercedes-Benz V-Class/Metris. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
KRMV021T - Mercedes-Benz V-Class L2 / Metris 126"WB (2014-Current) Slimline II 1/2 Roof Rack KitConsisting of:1x FAMV004 - Mercedes-Benz V Class LWB (2014-Current) Foot Rail1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.48kg (73.81lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 38kg (84lbs)
FRONT RUNNER Mercedes-Benz V-Class L2 / Metris 126Wb (2014-Current) Slimline...
$2,693.70
$2,993.00
This 2772mm/109.1" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz V-Class. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack (such as Front Runner tables).
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
KRMV020T - Mercedes-Benz V-Class L2 / Metris 126"WB (2014-Current) Slimline II Roof Rack KitConsisting of:1x FAMV004 - Mercedes-Benz V Class LWB (2014-Current) Foot Rail1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 49.81kg (109.81lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 255mm (10")Shipping Weight:Weight: 53kg (117lbs)
FRONT RUNNER Mercedes-Benz V-Class Xlwb (2014-Current) Slimline Ii 1/2 Roof...
$1,723.50
$1,915.00
This 1358mm/53.5 long half-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your V-Class XLWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMV011T - Merc V-Class XLWB (2014-Curr) SLII 1/2 RR Kit
Consisting of:
1 x FAMV002 - Mercedes Benz V-Class XLWB (2014-Current) Foot Rails - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 240mm (9")
Shipping Weight:
Weight 35.7kg (78.6lbs)
FRONT RUNNER Mercedes-Benz V-Class Xlwb (2014-Current) Slimline Ii Roof Rack...
$2,690.10
$2,989.00
This 2772mm/109.1 long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your V-Class XLWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMV010T - Merc V-Class XLWB (2014-Curr) SLII RR Kit
Consisting of:
1 x FAMV002 - Mercedes Benz V-Class XLWB (2014-Current) Foot Rails - by Front Runner
1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 44kg (97lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 235mm (9")
Shipping Weight:
Weight 51.5kg (113.4lbs)
FRONT RUNNER Mercedes-Benz Vito Viano L1 (2003-2014) Slimline Ii 1/2...
$1,696.50
$1,885.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L1. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRMV030T - Mercedes-Benz Vito Viano L1 (2003-2014) Slimline II 1/2 Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.85kg (70.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 35kg (77lbs)
FRONT RUNNER Mercedes-Benz Vito Viano L1 (2003-2014) Slimline Ii Roof...
$2,533.50
$2,815.00
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L1. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRMV031T - Mercedes-Benz Vito Viano L1 (2003-2014) Slimline II Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.87kg (101.13lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 48kg (106lbs)
FRONT RUNNER Mercedes-Benz Vito Viano L2 (2003-2014) Slimline Ii 1/2...
$1,727.10
$1,919.00
This 1358mm/ 53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit is only suitable for the wheelbase 3200mm/126" and the vehicle length 4993mm/196.6" (long). The kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L2. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
FRONT RUNNER Mercedes-Benz Vito Viano L2 (2003-2014) Slimline Ii Roof...
$2,693.70
$2,993.00
This 2772mm/109.1" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L2. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack (such as Front Runner tables).
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
FRONT RUNNER Mercedes-Benz Vito Viano L3 (2003-2014) Slimline Ii 1/2...
$1,723.50
$1,915.00
This 1358mm/ 53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Mercedes Benz Vito Viano L3. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMV014T - Mercedes Benz Vito Viano L3 (2003-2014) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1x FAMV002 - Mercedes Benz V Class XLWB(2014-Current) Foot Rail
1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.84kg (79.01lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 39kg (86lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
