The speaker drivers from the PS 165 F3E kit combine the best of Flax technology with the latest Focal innovations to deliver one of the most natural sounds. The TMD surround (Tuned Mass Damper) is incorporated in the woofers and midranges to stabilise the surround and achieve better control, neutrality and linearity: the bass is even denser, the performance in the top midrange is improved and harmonic distortion reduced. Combined, these speaker drivers create a precise, powerful sound without colouration.The ‚ÄòM‚Äô-profile inverted dome TAM tweeters included in the kit offer a wider diffusion angle and greater sound definition, without directionality. Thanks to their tilted mounting, they are easy to install in the vehicle. An audiophile crossover completes the kit, offering several adjustment levels for the tweeters and midranges. Finally, with its engraved aluminium basket and meticulous finishes, PS 165 F3E combines style, discretion and modernity for a premium system. PS165F3E Features Unique, patented Flax cone Butyl surround with exclusive ‘TMD‚Äô profile Al/Mg ‚ÄòM‚Äô-profile inverted dome TAM tweeter Made in France in the Focal workshops High power handling Deep, sustained bass Very compact midrange Wider diffusion angle Natural, precise sound Easy installation

ISUB ACTIVE 2.1 2-channel amplifier The ISUB ACTIVE 2.1 subwoofer complements any original audio system, providing powerful (260 W), dynamic bass and amplification of the vehicle's front channels (2.1). It connects to the car radio's speaker outputs via the supplied Plug & Play cable, providing a genuine enhancement of the sound experience without loss of space in the cabin or trunk. KEY POINTS Focal know-how 2-channel amplifier Ready to use (Plug & Play ISO cable included) Compact product, discreet integration Ease of use Various settings (adjustable incoming signal, adjustable amplifier crossover, sound level boost, etc.) Robust design Sound - Acoustics Product type : Ultracompact amplified 20cm (8 ") and 2 -channel amplified subwoofer Loudspeakers : Subwoofer: 8" Filter : Integrated Frequency response (+/- 3dB) : 45Hz - 150kHz Maximum power : 260 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 130 W RMS Sound - Electronics Number of channels : 2 Configurable High Pass / Low Pass filter : High-pass crossover ajustable from 20 to 50 Hz Low-pass crossover ajustable from 50 to 180 Hz RMS power : 130 W RMS

THE ESSENTIAL ACCESSORY SPEAKER DRIVER GRILLE This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.

Pair of speaker grilles to suit 6.5" Speakers

BMW SPEAKER RING ADAPTOR X5 X6 SPEAKER RING ADAPTOR To install the Focal Inside IS BMW 100 / 100L or IC BMW 100 / 100L kits on your BMW X5 or X6 series, the Focal KIAC1122 spacer kit is required. Enjoy the optimal installation and superior sound quality for your journeys!

IW PSA YISO HARNESS | Plug & Play Adapter for Citroën, DS & Peugeot | Impulse 4.320 Compatible   Seamless Integration. Factory Fit. Focal Precision. The Focal IW PSA YISO HARNESS is a dedicated Plug & Play head unit adapter engineered for Citroën, DS Automobiles, and Peugeot vehicles. Designed specifically for the Focal Impulse 4.320 amplifier, it provides an effortless, OEM-grade connection between your vehicle’s original head unit and Focal Inside extension cables. This precision-built harness allows fast and secure installation—no cutting, soldering, or modification required. Its ISO-standard connectors ensure a perfect fit and clean signal transfer, making it the ideal solution for achieving superior amplified sound while preserving your vehicle’s factory wiring integrity. Key Features • Designed for the Focal Impulse 4.320 digital amplifier• Plug & Play connectivity for Citroën, DS Automobiles & Peugeot• OEM-grade connectors for factory-fit reliability• Quick, clean installation – no soldering required• Direct link from head unit to amplifier• Length: 0.9ft (0.3m)• Compatible with vehicles manufactured since 2014 Note: Plug & Play harnesses are designed for use with factory head units only. For aftermarket systems, please use a standard wiring kit. Focal IW PSA YISO – Factory Integration. Amplified by Focal.

FOCAL VW GOLF POWERED 6.2 PACK PLUG & PLAY SPEAKER UPGRADE Front: IS VW 165 Component KitRear: IS VW 155 Coaxial KitSubwoofer: ISUB TWINAmplifier: Impulse 4.320 2×55 Watts RMS to Front Speakers and 2×80 Watts RMS@2 Ohm to Subwoofer.Harnesses: IW IMP 2.1, IW-VW YISO HARNESS.   FRONT: The IS VW 165 2-way component kit is designed for all drivers who want to replace their original audio system with a hi-fi quality sound solution. The speaker drivers employ Polyglass technology, which delivers well-defined midrange and bass. The sound is natural and without coloration. The Aluminium inverted dome tweeter, a Focal technology, provides perfect treble reproduction in every direction. In addition, tweeter mounting foams and anti-vibration foams are included for a perfect set up. REAR: The IS VW 155 2-way component kit is designed for all drivers who want to replace their original audio system with a hi-fi quality sound solution. The speaker drivers employ Polyglass technology, which delivers well-defined midrange and bass. The sound is natural and without coloration. The Aluminium inverted dome tweeter, a Focal technology, provides perfect treble reproduction in every direction. In addition, tweeter mounting foams and anti-vibration foams are included for a perfect set up. SUBWOOFER: The pair of ISUB TWIN passive subwoofers drastically improves the impact of the bass in an in-car audio installation, specifically thanks to the double ferrite speaker drivers and heavy-duty, tough aluminium cone. The front grilles promote optimum sound dispersion throughout the cabin.These ultra-compact subwoofers are quick and easy to install too, without any car modifications required. They slide comfortably underneath the seats* and are super easy to attach, with no tools required, using the self-adhesive strips provided. However, it is also very easy to screw them to the floor if you so wish.We recommend powering the ISUB TWIN with amplifier Impulse 4.320, its two front channels will remain available to connect a pair of speaker drivers in the front doors, for example. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: The Focal Inside VOLKSWAGEN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Volkswagen original head unit and of Focal Inside extension cables. The Focal Inside IW IMP 2.1  car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring.

"FOCAL INSIDE IW T3Y 2008"" WOOFERS FOR SELECT TESLA VEHICLES Improve the bass kick in your Tesla You enjoy the many benefits of your Tesla, but the bass response from the factory speakers may not be as electrifying as you'd like. But now the Inside Series brings Focal's famous sound to your electric vehicle. The best news of all is that Focal designs and builds these woofers to fit perfectly into Tesla Model 3 and Model Y vehicles. All the necessary mounting hardware is included, and integrated connectors connect to your existing factory speaker plugs — no cutting, splicing, or vehicle modifications required. This rear image of the woofer shows off the stiff flax weave that stays lightweight, so it's easier to drive. Famous Focal sound Focal incorporates their innovative flax woofer cones into the Inside IW T3Y 200 8"" woofers. Focal discovered that a flax woofer cone produces a dynamic sound that's worthy of its reputation. At half the weight of fiberglass, these flax fibers help create a very rigid yet lightweight cone that ensures accuracy and limits unwanted vibrations. This efficient design means you'll get more accurate, punchy bass from your music. Product highlights: two 8"" woofers designed to fit Tesla Model 3 and Model Y vehicles Tesla-specific wire connectors (no cutting required) 8"" flax woofer cone with butyl rubber surround neodymium magnets and 1.5"" voice coils impedance: 4 ohms power handling: 75 watts RMS (150 watts peak) frequency response: 40-1500 Hz sensitivity: 91 dB grilles not included warranty: 1 year MFR # IW T3Y 200 Item # 091IWT3Y20  Features & specs General Speaker Size Vehicle-specific Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition Flax Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 91 Frequency Response 40 - 1.5k Hz Minimum RMS Wattage --- Maximum RMS Wattage 75 Peak Power Handling (Watts) 150 Top-mount Depth (Inches) 1 3/8 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 3 3/4 Mounting Height (Inches) 1.375 Frame Width 8.44 Frame Length 8.44 What's in the box: 2 Woofers Quick start guide (English/ French/ German/ Italian/ Spanish/ Portugese/ Dutch/ Polish/ Russian/ Chinese/ Korean/ Japanese/ Arabic) Focal window sticker 2 Adhesive backed Focal Inside badges "

FOCAL TOYOTA HILUX POWERED 6.2 PACK 2006-2019 FITS TOYOTA HILUX 2006-2019 Front: IS TOY 165 SplitsRear: IC TOY 165 CoaxialSubwoofer: PSB200Amplifier: Impulse 4.320 Power 2×55 Watts RMS to Front Speakers, 1×160 Watts RMS to SubwooferCables: IW IMP 2.1, IW TOY Y ISO HARNESS FRONT: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system. 

Front: IS TOY 165 Splits or *IS TOY 165 TWU if no factory tweeter podsRear: IC TOY 165 Coaxial Sub:Subwoofer: PSB 200 8inch Subwoofer Mounted in Sealed EnclosureAmplifier: Impulse4.320 Power 2x55WattsRMS to Front Speakers, 1x160WattsRMS to SubwooferCables: IW IMP 2.1, IW TOY Y ISO 2006-2019 or IW TOY V2 Y ISO 2020-2023, IW PWSUP600 FRONT: IS TOY 165 is a two-way component kit with a 6¬Ω” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IS TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. OR: The IS TOY 165 TWU kit is designed for drivers who want to replace their original audio system with a quality sound solution. The speaker drivers integrate the Polyglass cone for defined midrange and the Aluminium/Magnesium inverted dome tweeter, a Focal technology allowing perfectly rendered trebles. REAR: IC TOY 165 is a two-way coaxial kit with a 6¬Ω” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IC TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. SUBWOOFER: The compact PSB200 measures less than 51/8″ deep (13cm deep, with the grille) and therefore slides easily into a car boot. And its size isn’t the only great feature: it is also easy to use and delivers quality sound performance thanks to its 8″ subwoofer that has 250 watts of power. Delivered with brackets, screws and a set of hook-and-loop fastener, PSB200 can be fixed in various locations in your vehicle and it perfectly completes a 2 or 3-way audio system while remaining discreet and delivering precise and dynamic bass.With this passive enclosure, discover the pleasure of all sound nuances during your drive. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: The Focal Inside IW IMP 2.1  car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring. The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. OR: The Focal Inside I IW TOY Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320  compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original car radio and of Focal Inside extension cables.

Front: IS TOY 690 SplitsRear: IC TOY 165Amplifier: Impulse4.320 Power 2x55WattsRMS to Front SpeakersHarnesses: IMP EXTENSION I/O and ISO IW TOY Y ISO   FRONT: IS TOY 690 is a two-way component kit with a 6×9‚Äô‚Äôwoofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Reliable, neutral and powerful, the compactness and the ergonomics of the IS TOY 690 makes it easy to integrate thanks to the factory connectors. REAR: IC TOY 165 is a two-way coaxial kit with a 6¬Ω” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IC TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.  AND: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables.

"Focal IWT3Y200 2-Woofer Kit Woofers IWT3Y200 have been designed for drivers who want to replace their factory audio system with a high-quality solution by Focal that is fully compatible with the relevant Tesla models. Equipped with the Flax® cone, an exclusive Focal technology, they significantly improve the in-car listening experience. Designed and manufactured in France, the Tesla-compatible Focal Inside range allows an à la carte/personalised audio system configuration. Specifically designed for Model 3 and Model Y from car manufacturer Tesla®, the IW T3Y 200 woofers are aimed at drivers who wish to replace their OEM audio system with a Focal solution perfectly suited to their vehicle. Quick and easy to install, the IW T3Y 200 kit significantly improves the in-car listening experience. Designed and built in France, the speaker drivers boast the Flax sandwich cone, made from flax fibre. Renowned for its outstanding performance, this Focal technology helps to reproduce pure, natural and ultra-realistic sound. To further enhance its in-car performance, the IW T3Y 200 kit also includes a neodymium magnet. The Focal Inside kits for Tesla® vehicles offer a custom configuration and a 100% Plug & Play system. They allow you to set up the audio system of your choice and create the best possible listening experience. Product Compatibility Chart Make Model Years Notes Tesla Model 3 Tesla Model Y   Key Points Designed and built in France Compatible with Tesla® Model 3 and Model Y Enjoy the full benefits of high-fidelity Quick and easy to install with no vehicle modifications required Light and discreet components with a composite structure Perfect, seamless fit inside the cabin 100% Plug & Play system Specification Type 2 woofers kit Max. power 150W Nom. power 75W RMS Sensitivity (2.83V/1m) 91dB Frequency response 40Hz - 1500kHz Impedance 4Ω Woofer 8"" (200mm) Depth 11/4"" (31mm) Cone Flax® Voice coil diameter 11/2"" (38mm) Motor Neodymium Surround Butyl Cone diameter 200mm (8"") Grilles not included Net weight 850 Parameters Rdc 3.2Ω Fs 40Hz Mms 30g Cms 0.5mm/N Vas 35.7l Qts 0.6 Qes 0.64 Qms 8.5 Bxl 6N/A Sd 221cm² What's in the box 2 Woofers Quick start guide (English/ French/ German/ Italian/ Spanish/ Portugese/ Dutch/ Polish/ Russian/ Chinese/ Korean/ Japanese/ Arabic) Focal window sticker 2 Adhesive backed Focal Inside badges "

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. This single Focal SUB5KM 5-3/4" subwoofer is designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. The Focal SUB5KM subwoofer will serve up sizeable bass as part of your K2 Power M Series component system. Real presence Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make this tidy 5" sub uniquely equipped for maximum output, despite its small size. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 200 watts RMS, you can safely drive this sub with a healthy amount of power. Subwoofer Wiring Diagrams Product highlights: 5-3/4" 4-ohm component woofer (single) 'M'-profile Aramid fiber cone tuned mass damper surround super-rigid aluminum basket ferrite magnet handles up to 200 watts RMS (400 watts peak power) frequency response: 35-250 Hz sensitivity at 2.83V: 86 dB top-mount depth: 2-3/8" sealed box volume: 0.14-0.21 cubic feet grille not included warranty: 1 year MFR # SUB5KM Item # 091SUB5KM

The next in line after our passive 2-way kit 165W-RC, a leading product heralded for its performance for several years now, the 165W-XP integrates our exclusives technologies: TMD® surround, progressive spider, ventilated motor, new Beryllium tweeter, bi-amplification crossover. We also gave it a new design, steeped in our DNA and geared towards performance. The result: an uncompromising kit that opens the door to the world of Utopia. THE BEST OF FOCAL TECHNOLOGIES 'W' sandwich coneThe ‘W’ sandwich cone perfectly optimises the frequency response curve by fully mastering the three key parameters of lightness, rigidity and damping. When listening through the ‘W' sandwich cone, the sound is completely transparent with extremely little distortion. TMD® surround Originally developed for the Sopra line of high-fidelity loudspeakers, our TMD® (Tuned Mass Damper) surround has a unique profile, designed to better control the effects of resonance and to drastically reduce the distortion associated with deformations of the cone. The speaker driver takes advantage of this patented technology by spreading better defined and very realistic midranges.Progressive spiderThe progressive spider used on all our Utopia drivers is built around a progressive section that reproduces all the impact of the bass whilst optimising the linearity, precision and dynamics of the sound.Bi-amplification crossover All the components on our crossover have been specially selected and optimised to better control the effects of thermal dissipation. These components, essential for managing different channels and the soundstage, have improved reliability. As for the bi-amplification, this enables the woofer and tweeter to be driven separately in terms of power, resulting in optimum performance.  Type Separated 2-way passive kit Tweeter Beryllium Inverted dome Woofer (6 1/2") 165mm Cone 'W' Suspension Tuned Mass Damper (TMD®) Impedance 2Ω Max. power 200W Nom. power 100W Sensitivity (2.83 V/1 m) 93dB Frequency response 60Hz - 40kHz Accessories Grilles, screws and filters supplied TWEETER  6.5" WOOFER 

Give your head unit a breath of fresh air Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. TECHNOLOGY PLATFORM FROM FD AMPLIFIERS The technology used for Impulse 4.320 was inspired by the Performance range’s FD amplifiers. With an efficiency of more than 90%, Class D amplification has numerous advantages: less heat, low power consumption, low distortion at high volumes, compact…With the Impulse 4.320 amplifier, an unbeatable size/power ratio has been achieved. It delivers 4 x 55 or 2 x 160 Watts RMS at 4 Ohms. Thanks to the adequate power and the fast attack for realistic and more aerated sound, it will completely transform the sound of your front and rear speaker drivers. VERY EASY TO INSTALL AND PERFECT INTEGRATION Impulse 4.320 – Cables Measuring only 67/8 x 17/8 x 25/8″ (17.65 x 4.6 x 6.7 cm) Impulse 4.320 can easily be concealed within the dashboard or the centre console. Equipped with high-level (automatic detection feature) and low-level inputs, it is compatible with all head units. Supplied with all fastenings, an adaptor for the head unit’s speaker driver outputs, RCA adaptors for aftermarket head units and power connector, this amp was specially designed to be easy to install. No direct hook up to the vehicle’s battery is required. An optional ISO connector is available for “Plug&Play” connectivity via the head unit’s harness. Note: On certain cars, a harness adapter may be necessary. EXTREMELY VERSATILE To ensure compatibility with different head units, this amplifier features a 2-channel or 4-channel input selector switch. Most of all, Impulse 4.320 has been designed to power front and rear speaker drivers. However, it can also be used in a 3-channel or 2-channel mode in order to meet all needs for improving small installations and it can also be used for powering the front speaker drivers and a small subwoofer. Each pair of channels features an active crossover to adapt the sonic response according to the speaker drivers used. The front channels can be used for wideband speaker drivers or the high-pass filter can be used for frequencies above 75 Hz when only small speaker drivers are used. By avoiding having small speaker drivers reproduce very low frequencies, the sound will have more clarity. The rear channels are equipped with an active crossover (wideband, high-pass or low-pass) and with progressive phase adjustment for powering a small subwoofer or wideband speaker drivers of different sizes.

Extremely Versatile With the FPX 5.1200, installation of this hi-fi system is much easier as there's only one amplifier and one power supply to fit into the vehicle. In order to control this 5-channel installation (with front and rear speaker drivers, and a subwoofer), the FPX 5.1200 features a wide range of settings. The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs. For the main speaker drivers, each pair of channels has an adjustable active crossover. To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to. Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With the launch of the FPX 5.1200, Focal now offers a full range of amplifiers, from the Impulse ‘Plug & Play’ amplifier to the audiophile FPX amplifier. Through our compact FD amplifiers, Focal is able to meet the expectations of all those looking for a car audio amplifier. With its high power, great musicality and compact design, as well as being ideal for powering a complete installation with Flax or K2 Power speaker drivers, the FPX 5.1200 will meet all the expectations of hi-fi car audio enthusiasts. Extensive research for unprecedented power in a compact enclosure Delivering very high power from such a compact enclosure is a true challenge. The more heat an amplifier produces, the higher the risk of distortion affecting the system’s musicality. By using Class D technology, Focal has reduced the need for heat dissipation for its FPX range. However, in order to achieve high efficiency and to optimise reliability, FPX amplifiers required extensive research: the selection of the best components, a thick aluminium chassis, very precise positioning of the components, monitoring heat dissipation with a thermal camera and accelerated aging tests in draconian conditions. Focal’s goal is to offer electronics equipment which is very compact and powerful, but without sacrificing musicality. The dimensions of the 5-channel FPX 5.1200 amplifier (337 x 175 x 57mm / 13.25"x 6.8" x 2.25") are nearly the same as the FPX 4.400 SQ. The FPX 5.1200 has a maximum power of 4 x 120 Watts + 1 x 720 Watts at 2 Ohms!

The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. POWERFUL AND VERSATILE 420W MONO AMPLIFIER The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel. FOCAL FPX 1.1000 KEY FEATURES Mono Class D amplifier Complete range of settings (active crossover, subsonic filter, bass boost, phase control) Stable under 2 Ohms and 1 Ohm Output lines COLOSSAL POWER FOR SUCH A COMPACT CHASSIS Very compact and easy to integrate, the FPX 1.1000 amplifier has been specifically developed for powering all types of the subwoofer. It is stable at 4 Ohms, 2 Ohms and 1 Ohm, delivering a respective power of 420, 700 and 1000 Watts RMS. Whether it’s for an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs. It features all the settings you’d expect to find in such an efficient bass amplification system: an adjustable low-pass active crossover with a slope of 24 dB, subsonic filter with a slope of 24 dB, bass boost and phase control. The FPX 1.1000 comes supplied with remote control for controlling the bass from the dashboard, and a pair of output lines for hooking up a second amp. This is especially useful for setting up a bass channel with two subwoofers and two amplifiers. WHAT MAKES THE DIFFERENCE A powerful and ultra-compact amplifier Perfect for audiophile installations or powerful subwoofer systems Optimised heat dissipation Extremely versatile Remarkable power/performance/price ratio