HERTZ Cento Pro 6.5" 2-Way Coaxial Speaker - Pair (Cpx...
$354.99
The CPX 165 car audiocoaxial provides the thrill of listening to the Hertz sound even when the vehicle does not allow the installation of a two-way kit. The Tetolon dome tweeter and Neodymium magnet is provided with off-axis dispersion features and exceptional frequency extension for a detailed, airy sound. Radial Venting System technology ensures unparalleled cooling of the coil thanks to the eight holes at the base of the engine that allow air exchange with the tweeter support. This acts as a rear camera, sized for low Fs, to ensure a natural mid range and allow a low frequency crossover point with the woofer. The pressed-paper cone and the butyl rubber suspension offer an extended low frequency response and an impressive punch. The Mille-inspired design basket features a dampened and protective rubber coated magnet. The grille, available as optional, is made up of a durable high resistance ABS frame and metallic mesh protection.
Component
Coaxials
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
95
Power Handling - Peak W
285
Impedance Ohm
4
Tweeter diaphragm mm (in.)
26 (1)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 22k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 17 (3.35 x 1.26 x 0.67)
Tweeter Magnet size D x h mm (in.)
19 x 3 (0.75 x 0.12)
Weight of one speaker kg (lb.)
1.13 (2.49)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-paper cone
Dome
Tetolon
Xmech mm (in.)
±6,9 (0.27)
D mm
131,5
Re Ohm
3,3
Fs Hz
60
Le mH
0,29
Vas I
11,8
Mms g
14,6
Cms mm/N
0,47
BL T*m
5,3
Qts
0,55
Qes
0,64
Qms
4,1
Spl dB
92
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
84,5 mm
3.33 in.
D
65,5 mm
2.58 in.
E
171 mm
6.73 in.
F
24 mm
0.94 in.
HERTZ Cento Pro 6.5" 2-Way Component Speaker - Pair (Cpk...
$479.99
The Hertzaudio Cento Pro CPK 165 PRO car audio system includes the CP 165woofer and the CP 25 tweeter with Tetolon dome and 25 mm voice coil, features ensuring a very wide and linear frequency response. The CP 25 employs the “Center Tuning Duct” technology: the tunnel at the center of the powerful Neodymium magnetic circuit, ensures low-temperature air exchange between the dome and the rear loading chamber, perfectly tuning the acoustics. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. The sophisticated design of the mobile group and suspensions of the CP 165 woofer, featuring a 60Hz calibrated resonance frequency, ensures a medium-low power with excellent punch, making listening to rich low frequency genres a unique experience. The basket is consistent with the family-feeling of the Mille line with the addition of damping and protective rubber. The cone material is inherited from the Mille Pro, as well as the suspension butyl rubber and the Tetolon fiber of the tweeter dome. These materials have excellent damping and lightness characteristics, producing a balanced sound without resonance peaks. The gift box includes the woofers grilles made of a combination of metallic mesh and high resistance ABS plastic frame. The combination of these two elements allows the user to customize the installation with a sophisticated and elegant design.
Component
System
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
105
Power Handling - Peak W
315
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Sensitivity dB SPL
92,5
Frequency Response Hz
45 ÷ 22,5k
Crossover Cut off
2,8 kHz @ 12 dB Oct.
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
1.07 (2.36)
Weight of one component - Tweeter kg (lb)
0.07 (0.15)
Weight of one component - Crossover kg (lb)
0,2 (0.44)
D mm
131,5
Re Ohm
3,3
Fs Hz
60
Le mH
0,3
Vas I
11,5
Mms g
15,4
Cms mm/N
0,44
BL T*m
5,45
Qts
0,57
Qes
0,66
Qms
4,3
Spl dB
92,5
HERTZ Cento Pro 6X9" 2-Way Component Speaker - Pair (Cpk...
$479.99
The latest addition to the Cento PRO line is the CPK 690 system equipped with an elliptical woofer to avail of the 6 x 9 door placements, which are particularly common in the North American market, such as for the models of Toyota and FORD groups.Like the other speakers of the Cento PRO line, the woofer cone is made of pressed paper, the most suitable material to obtain a linear and controlled emission even when the woofer is driven with very high power.All electroacoustic parameters have been optimized to obtain maximum performance with door installations; we therefore find a magnetic group and voice coil improved for an excellent power handling and a lower resonance frequency.The large emission area of the CP 690 increases the woofer efficiency and extends the response down to 35 Hz. The crossover made with selected components, features a low-pass filter on the woofer with a 6 dB/oct. slope and12 dB/oct. on the tweeter with three levels of attenuation.CPK 690 is dedicated to the young enthusiast who wants a front row seat at their favourite concert while sitting comfortably behind the steering wheel.
Component
System
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
120
Power Handling - Peak W
360
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
30,5 (1.2)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Sensitivity dB SPL
92
Frequency Response Hz
35 ÷ 22,5k
Crossover Cut off
LP 6 dB / Oct. - HP 12 dB / Oct.
Crossover Type
2 Way
Weight of one component - Woofer
1,69 (3.73)
Weight of one component - Tweeter kg (lb)
0,07 (0.15)
Weight of one component - Crossover kg (lb)
0,2 (0.44)
D mm
172
Re Ohm
3,2
Fs Hz
58
Le mH
0,33
Vas I
22,80
Mms g
25,3
Cms mm/N
0,30
BL T*m
6,9
Qts
0,48
Qes
0,62
Qms
2,2
Spl dB
92,5
HERTZ Cento Pro 6X9" 3-Way Coaxial Speaker - Pair (Cpx...
$479.99
The three-way car audio coaxial CPX 690 is the best solution for enthusiasts who love highly dynamic listening with low engaging frequencies and want to make the most of the rear deck mount. Tweeter and Supertweeter both feature Neodymium magnet and Tetolon dome, 32 mm and 24 mm respectively. The stylish faceplate is designed to maximize off-axis emissions and thus optimizing horizontal installation. As for the CPX 165, the CPX 690's Tweeter and Supertweeter boasts Radial Venting System technology for outstanding cooling and acoustic performance. The robust basket with radial ventilation keeps operating temperatures low. The supplied grille is made of a high resistance ABS plastic support and metallic mesh to ensure a high level of protection with a Hi-tech design
Component
Coaxials
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
120
Power Handling - Peak W
360
Impedance Ohm
4
Tweeter diaphragm mm (in.)
32 (1.26)
Woofer Voice Coil Ø mm (in.)
30 (1.2)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Frequency Response Hz
35 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
27,8 x 3 (1.09 x 0.12)
Weight of one speaker kg (lb.)
1,63 (3.59)
Woofer Magnet
Ferrite
Tweeter Magnet
Neodymium
Cone
Water repellent pressed paper
Dome
Tetolon
Xmech mm (in.)
7,5 (0.3)
D mm
172
Re Ohm
3,4
Fs Hz
68
Le mH
0,53
Vas I
15,8
Mms g
26,5
Cms mm/N
0,21
BL T*m
6,0
Qts
0,77
Qes
1,10
Qms
2,7
Spl dB
94
A
237,5 mm
9.35 in.
B
225 mm
8.86 in.
C
103 mm
4.06 in.
D
85 mm
3.35 in.
E
269 mm
10.55 in.
F
28,5 mm
1.12 in.
HERTZ Dcx160.3 2-Way 6" Coaxial Speakers - DCX160.3
$165.00
Dieci 120W 6 Inch 2-Way Coaxial Speakers
Large motor assembly
Pure copper voice coil
Water-repellent treated paper cone
TPU surround
Neodymium tweeter with PEI dome
DIN-size basket protected by abrasion-proof dust paint
Tin-plated, high current terminals
Silver-plated lead wires
Butyl rubber protective cover
Epoxy glue for basket and motor system
Low carbon content plates
Adaptor ring included
DISCLAIMER: Design, features and specifications subject to change without notice. Some features in videos on the Internet may not be available on all models, please contact us for the TECHNICAL SPECIFICATIONS for a complete list of features by model. This feature list is for reference only, please contact us to verify features and functionality.
HERTZ Dieci 3.5" 2-Way Coaxial Speaker - Pair (Dcx 87.3)
$134.99
Hertz DCX 87.3 coaxial speaker combines a woofer made of the highest performance materials with a neodymium tweeter featuring the exclusive PEI dome. Despite its compact size, the DCX 87.3 features an oversized magnetic group for ultimate control, still maintaining a compact size. For those who look for a high-performance two-way coax, the DCX 87.3 is able to ensure wide frequency response and excellent sound in any installation.
Component
Two way coaxial
Size mm (in.)
87 (3.4)
Power Handling - Continuous W
30
Power Handling - Peak W
60
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
130 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
60 x 24 x 8 (2.4 x 0.9 x 0.3)
Weight of one speaker kg (lb.)
0,31 (0.68)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
70
Re Ohm
3,1
Fs Hz
190
Vas I
0,7
Mms g
2,0
Cms mm/N
0,35
BL T*m
2,5
Qts
1
Qes
1,25
Qms
5,66
Spl dB
92
A
87 mm (3.4 in.
A3
120 mm (4.7 in.)
B
81 mm (3.2 in.)
C
45 mm (1.8 in.)
D
34 mm (1.3 in.)
HERTZ Dieci 4" 2-Way Coaxial Speaker - Pair (Dcx 100.3)
$134.99
To meet all installation needs, without giving up on Hertz quality and performance, Hertz DCX 100.3 car audio coaxial is designed with maniacal care to provide linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Component
Two way coaxial
Size mm (in.)
100 (4)
Power Handling - Continuous W
30
Power Handling - Peak W
60
Impedance Ohm
4
Frequency Response Hz
70 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
70 x 32 x 10 (2.7 x 1.3 x 0.4)
Weight of one speaker kg (lb.)
0,45 (0.99)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
85
Re Ohm
3,3
Fs Hz
115
Vas I
1,7
Mms g
5,0
Cms mm/N
0,38
BL T*m
3,5
Qts
0,79
Qes
0,96
Qms
4,33
Spl dB
92
A
99 mm (3.9 in.)
A3
129 mm (5.1 in.)
B
94 mm (3.7 in.)
C
50 mm (2.0 in.)
D
43 mm (1.7 in.)
HERTZ Dieci 4X6" 2-Way Coaxial Speaker - Pair (Dcx 460.3)
$164.99
Hertz DCX 460.3car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. This 2-way coax speaker is designed to satisfy specific installation and listening needs. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level.
Component
Two way coaxial
Size mm (in.)
(4 x 6)
Power Handling - Continuous W
40
Power Handling - Peak W
80
Impedance Ohm
4
Depth mm (in.)
53 (2.1)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
65 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 32 x 10 (3.1 x 1.3 x 0.4)
Weight of one speaker kg (lb.)
0,58 (1.28)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
103
Re Ohm
3,3
Fs Hz
90
Vas I
6,2
Mms g
6
Cms mm/N
0,41
BL T*m
3,8
Qts
0,79
Qes
0,92
Qms
5,20
Spl dB
93
A1
155 mm (6.1 in.)
A2
97 mm (3.8 in.)
B1
146 mm (5.7 in.)
B2
89 mm (3.5 in.)
C
53 mm (2.1 in.)
D
45 mm (1.8 in.)
HERTZ Dieci 5" 2-Way Coaxial Speaker - Pair (Dcx 130.3)
$134.99
To meet all installation needs, without giving up on Hertz quality and performance, The Dieci DCX 130.3 car audio coaxials were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Component
Two way coaxial
Size mm (in.)
130 (5)
Power Handling - Continuous W
40
Power Handling - Peak W
80
Impedance Ohm
4
Frequency Response Hz
65 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
70 x 32 x 15 (2.7 x 1.3 x 0.6)
Weight of one speaker kg (lb.)
0,56 (1.23)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
112
Re Ohm
3,3
Fs Hz
82
Vas I
7
Mms g
7,4
Cms mm/N
0,51
BL T*m
3,8
Qts
0,76
Qes
0,93
Qms
4,3
Spl dB
93
A
130 mm (5.0 in.)
A3
151 mm (5.9 in.)
B
116 mm (4.6 in.)
C
59 mm (2.3 in.)
D
52 mm (2.0 in.)
HERTZ Dieci 5.25" 2-Way Component Speaker - Pair (Dsk 130.3)
$239.99
component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers
5-1/4" treated paper woofer with polyurethane surround
15/16" PEI dome tweeter with external crossover
handles up to 60 watts RMS (120 watts peak power)
frequency range: 60-23,000 Hz
sensitivity: 93 dB
woofer mounting depth: 2-3/16"
impedance: 4 ohms
grilles not included
warranty: 2 years
MFR # DSK 130.3
Item # 301DSK1303
General
Speaker Size
5 1/4
Driver Design
2-way
Woofer Design
Cone
Woofer Material
Pressed Paper (Water-Repellent)
Woofer Surround
Polyurethane
Midrange Design
---
Midrange Material
---
Tweeter Design
24mm Dome
Tweeter Material
PEI
Super Tweeter Design
---
Super Tweeter Material
---
Impedance (Ohms)
4
Weather-resistant
No
Grilles Included
No
Parts Warranty
2 Years
Labor Warranty
2 Years
Specifications
Sensitivity (1W at 1 meter)
93
Sensitivity at 2.83 volts
N/A
Frequency Response
60 - 23k Hz
Maximum RMS Wattage
60
Peak Power Handling (Watts)
120
Top-mount Depth (Inches)
2 3/16
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
4 1/2
Mounting Height (Inches)
0.192
Frame Width
5.114
Frame Length
5.114
HERTZ Dieci 5X7" 2-Way Coaxial Speaker - Pair (Dcx 570.3)
$174.99
Hertz DCX 570.3 car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level. This 2-way coax speaker is designed to satisfy specific installation and listening needs.
Component
Two way coaxial
Size mm (in.)
(5 x 7)
Power Handling - Continuous W
60
Power Handling - Peak W
120
Impedance Ohm
4
Depth mm (in.)
66 (2.6)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
60 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 40 x 15 (3.1 x 1.6 x 0.6)
Weight of one speaker kg (lb.)
0,76 (1.67)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
136
Re Ohm
3,3
Fs Hz
81
Vas I
10,7
Mms g
10,8
Cms mm/N
0,36
BL T*m
4,3
Qts
0,82
Qes
1,00
Qms
4,56
Spl dB
93
A1
220 mm (8.7 in.)
A2
141 mm (5.6 in.)
B1
182 mm (7.2 in.)
B2
127 mm (5 in.)
C
66 mm (2.6 in.)
D
59 mm (2.3 in.)
HERTZ Dieci 6" 2-Way Component Speaker - Pair (Dsk 160.3)
$239.99
Product info:
component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers
6" treated paper woofer with polyurethane surround
separate PEI dome tweeter with external crossover
includes tweeter mounts, plus adapter rings for select GM and Honda vehicles
handles up to 80 watts RMS (180 watts peak power)
frequency range: 50-23,000 Hz
sensitivity: 94 dB (1 watt at 1 meter)
woofer mounting depth: 2-1/4"
impedance: 4 ohms
grilles not included
warranty: 2 years
MFR # DSK 160.3
Item # 301DSK1603
Size Classification Note: Hertz describes these woofers as 6", but they fit many standard 6½" and 6¾" applications. The included adapter brackets are used to fit several specialized factory speaker applications. The brackets are also useful as a spacer in shallow locations; the brackets add just over ¼" to the woofers' mounting height and subtract just over ¼" from the mounting depth. Please enter your vehicle information to confirm fit.
Tweeter Mounting: Brackets are included for flush mounting and angled surface mounting (60° or 30°) the tweeters.
Tweeter Mounting Dimensions:
Flush Mount
60° Angled Surface Mount
30° Angled Surface Mount
Mounting Height
0.366"
1.232"
1.515"
Depth
0.426"
N/A
N/A
Frame Diameter
1.605"
N/A
N/A
Cutout Diameter
1.420"
N/A
N/A
Frame Width
N/A
1.463"
1.463"
Frame Depth
N/A
1.535"
1.255"
Crossovers: The included 48" tweeter wires have high pass crossovers wired in-line. The input end of each wire is terminated with female quick slides that attach to the woofer terminals, and the output end has terminals that mate to the terminals on the wire attached to the tweeters. The crossover point is 3.5 kHz and the slope is 6 dB/octave. Each crossover is approximately 1" long and ⅜" at its widest point. The woofer is not crossed over.
General
Speaker Size
6
Driver Design
2-way
Woofer Design
Cone
Woofer Material
Pressed Paper (Water-Repellent)
Woofer Surround
Polyurethane
Midrange Design
---
Midrange Material
---
Tweeter Design
24mm Dome
Tweeter Material
PEI
Super Tweeter Design
---
Super Tweeter Material
---
Impedance (Ohms)
4
Weather-resistant
No
Grilles Included
No
Parts Warranty
2 Years
Labor Warranty
2 Years
Specifications
Sensitivity (1W at 1 meter)
94
Sensitivity at 2.83 volts
N/A
Frequency Response
50 - 23k Hz
Maximum RMS Wattage
80
Peak Power Handling (Watts)
180
Top-mount Depth (Inches)
2 1/4
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
5 1/16
Mounting Height (Inches)
0.384
Frame Width
6.256
Frame Length
6.256
HERTZ Dieci 6X9" 3-Way Coaxial Speaker - Pair (Dcx 690.3)
$174.99
Hertz DCX 690.3 Dieci series car audio coaxials use an oversized magnetic group, TPU (Thermoplastic polyurethane) surround, a 60 mm diameter midrange, and a PEI dome tweeter. The result is linearity, wide dispersion, and extra-ordinary efficiency not found in traditional coax components. An involving, emotional sound, even at high SPL levels. An authentic 3-way coax capable of reproducing a wide frequency spectrum.
Component
Three way coaxial
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
90
Power Handling - Peak W
180
Impedance Ohm
4
Depth mm (in.)
98 (3.9)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
45 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 40 x 15 (3.1 x 1.6 x 0.6)
Weight of one speaker kg (lb.)
0,95 (2.09)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
High density flux ferrite
D mm
170
Re Ohm
3,4
Fs Hz
66
Vas I
25,7
Mms g
16,5
Cms mm/N
0,35
BL T*m
3,9
Qts
1,12
Qes
1,55
Qms
4,06
Spl dB
93
A1
237 mm (9.3 in.)
A2
162 mm (6.4 in.)
B1
224 mm (8.8 in.)
B2
153 mm (6.0 in.)
C
98 mm (3.9 in.)
D
77 mm (3.0 in.)
HERTZ Marine 6.5" (165Mm) 100W 2-Way Total-Charcoal Coaxial Speaker -...
$329.99
HEX 6.5 M marine coaxial, available with both total-white (TW) and total-black grilles (TC), provides the perfect style for your boat, giving you years of pure fun while cruising, being over-engineered, and tested for Marine applications.
The compact 6.5” speaker, with a depth of only 2.36 in. delivers a detailed and dynamic sound, making every outing memorable.
Component
COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
85 (3.25)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
172 mm
6.77 in.
B
128 mm
5.04 in.
C
85 mm
3.25 in.
D
60,5 mm
2.38 in.
F
24,5 mm
0.96 in.
HERTZ Marine 6.5" (165Mm) 100W 2-Way Total-White Coaxial Speaker -...
$329.99
HEX 6.5 M marine coaxial, available with both total-white (TW) and total-black grilles (TC), provides the perfect style for your boat, giving you years of pure fun while cruising, being over-engineered, and tested for Marine applications.
The compact 6.5” speaker, with a depth of only 2.36 in. delivers a detailed and dynamic sound, making every outing memorable.
Component
COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
85 (3.25)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
172 mm
6.77 in.
B
128 mm
5.04 in.
C
85 mm
3.25 in.
D
60,5 mm
2.38 in.
F
24,5 mm
0.96 in.
HERTZ Marine 6.5" (165Mm) White In-Ceiling Speaker - Single Unit...
$294.99
Hertz marine In-Ceiling speaker is designed to deliver thrilling sound with a near stealth installation. Engineered to be incredibly durable, they are fine-tuned for in-wall positioning providing top audio performance from very discreet designs. This includes an advanced crossover built with marine conformal coated PCB encapsulated in a sealed enclosure to prevent corrosion.
Component
IN-CEILING COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
6
Depth mm (in.)
87 (3.43)
Tweeter diaphragm mm (in.)
24 (0.9)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
50 ÷ 22k
Woofer Magnet size D x d x h mm (in.)
75 x 32 x 15 (2.95 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
19 x 3 (0.75 x 0.12)
Weight of one speaker kg (lb.)
1.75 (3.86)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
Tetolon
Xmech mm (in.)
≤4,8 (0.19)
D mm
125
Re Ohm
5
Fs Hz
60
Le mH
0.32
Vas I
10.48
Mms g
14.2
Cms mm/N
0.50
BL T*m
5.3
Qts
0.81
Qes
0.98
Qms
4.8
Spl dB
88
A
231 mm
9.08 in.
B
203.5 mm
8.01 in.
C
87 mm
3.43 in.
D
81 mm
3.2 in.
E
6mm
0.23 in.
HERTZ Marine 6.5" 2-Way Black / Grey Rgb Coaxial Speaker...
$499.99
HMX 6.5 S-LD-G marine coaxial speaker features a sports paintable grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.
Component
HI-END LED COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
75
Power Handling - Peak W
150
Impedance Ohm
4
Depth mm (in.)
95,6 (3.76)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
50 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
78,5 x 32 x 17 (3.09 x 1.26 x 0.67)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±6,65 (0.26)
D mm
125
Re Ohm
3,5
Fs Hz
65
Le mH
0,53
Vas I
8,8
Mms g
14
Cms mm/N
0,4
BL T*m
5,2
Qts
0,7
Qes
0,75
Qms
11,5
Spl dB
89
A
172,2 mm
6.78 in.
B
128 mm
5.04 in.
C
95,6 mm
3.76 in.
D
69 mm
2.72 in.
F
26,6 mm
1.05 in.
HERTZ Marine 6.5" 2-Way Black Coaxial Speaker - Pair (Hex...
$325.00
The HEX 6.5 M-C-O combines timeless marine design with the rugged performance expected from Hertz Marine. Featuring a Marine Total Black grille, this speaker adds a sleek, modern touch to any vessel while ensuring long-lasting protection in the harshest marine environments. Engineered and tested for real marine duty, the HEX 6.5 M-C-O delivers detailed, dynamic sound in a compact format, only 2.36 inches deep, making every voyage more enjoyable. Certified with the Hertz Pure Marine stamp, it meets IP65, ASTM-D4329 UV, and ASTM-B117 salt fog standards for maximum durability and performance. Its high-efficiency tweeter, optimized through FEM simulation, ensures perfect off-axis dispersion typical of in-boat installations, while the sound-transparent mesh grille with a twist-and-lock system guarantees elegance and solid protection. The 25 mm (1”) voice coil woofer, designed for infinite baffle applications, features silicone-insulated leads for extended reliability, complemented by a sealed built-in crossover with resettable tweeter protection and nickel-plated corrosion-resistant terminals. Pure style, powerful sound, and lasting protection, engineered for life at sea.
Component
COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
85 (3.25)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
172 mm
6.77 in.
B
128 mm
5.04 in.
C
85 mm
3.25 in.
D
60,5 mm
2.38 in.
F
24,5 mm
0.96 in.
HERTZ Marine 6.5" 2-Way Charcoal Coaxial Speaker - Pair (Hmx...
$419.99
The HMX 6.5 hi-performance marine coaxial speakers, also available in the black option HMX 6.5-C, is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
75
Power Handling - Peak W
150
Impedance Ohm
4
Depth mm (in.)
95,6 (3.76)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
50 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
78,5 x 32 x 17 (3.09 x 1.26 x 0.67)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±6,65 (0.26)
D mm
125
Re Ohm
3,5
Fs Hz
65
Le mH
0,53
Vas I
8,8
Mms g
14
Cms mm/N
0,4
BL T*m
5,2
Qts
0,7
Qes
0,75
Qms
11,5
Spl dB
89
A
172,2 mm
6.78 in.
B
128 mm
5.04 in.
C
95,6 mm
3.76 in.
D
69 mm
2.72 in.
F
26,6 mm
1.05 in.
HERTZ Marine 6.5" 2-Way Classic Charcoal Rgb Coaxial Speaker -...
$479.99
HMX 6.5 LD-C - Marine Coax RGB LED
The high-performance marine coaxial speakers HMX 6.5 LD with RGB-LED lighting option, which are also available in the black option HMX 6.5-LD-C, are optimized for an infinite baffle performance with solid bass and excellent output . The HMX tweeters have an acoustic lens that is optimized for optimal off-axis scattering and maximum sound pressure. The attractive tweeter grille made of stainless steel ensures perfect high-frequency transmission and solid protection. The RGB LED lighting circuit is integrated under the tweeter and protected by a transparent polypropylene cover that serves as light scattering. The UV-resistant polypropylene cone, which, together with the basket and the grille, into which a high-temperature and UV-resistant polymer was injected, was overmoulded with Santoprene rubber, neutralizes water, dust and mud. The aramid fiber spider with silicone-insulated connecting wires ensures a long service life and constant performance over time. The mobile high-performance device is driven by a massive magnet group to deliver a high, undistorted sound pressure.
quantity:
1 pair
Lightning:
Freely adjustable
Housing color:
black
Impedance (in Ohm):
4,0
Speaker Type:
Coax-System
Speaker Features:
2 ways, marine compatible
Peak Power (in Watt):
150
Power RMS (in Watt):
75
Product group:
Speaker
HERTZ Marine 6.5" 2-Way Classic White Coaxial Speaker - Pair...
$374.99
HEX 6.5 C-W marine coaxial features classic grilles will give you years of pure fun while cruising, being over engineered and tested for Marine applications. The compact 6.5” speaker, with a depth of only 2.36 in. delivers a detailed and dynamic sound, making every outing memorable.
Component
CLASSIC COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
84.5 (3.33)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1,1 (2.4)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
192,5 mm
7.58 in.
B
128 mm
5.04 in.
C
84,5 mm
3.33 in.
D
60,5 mm
2.38 in.
F
24 mm
0.94 in.
HERTZ Marine 6.5" 2-Way Classic White Rgb Coaxial Speaker -...
$479.99
HMX 6.5 LD-TW hi-performance marine coaxial speakers with RGB LEDs lighting option, also available in the black option HMX 6.5 LD-TC, feature a tone-on-tone front mesh matching the grille colour. The tweeter acoustic lens optimizes off-axis dispersion and maximized SPL.The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END LED COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
75
Power Handling - Peak W
150
Impedance Ohm
4
Depth mm (in.)
95,6 (3.76)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
50 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
78,5 x 32 x 17 (3.09 x 1.26 x 0.67)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±6,65 (0.26)
D mm
125
Re Ohm
3,5
Fs Hz
65
Le mH
0,53
Vas I
8,8
Mms g
14
Cms mm/N
0,4
BL T*m
5,2
Qts
0,7
Qes
0,75
Qms
11,5
Spl dB
89
A
172,2 mm
6.78 in.
B
128 mm
5.04 in.
C
95,6 mm
3.76 in.
D
69 mm
2.72 in.
F
26,6 mm
1.05 in.
HERTZ Marine 6.5" 2-Way Rgb Coaxial Speaker - Pair (Hex...
$399.99
SPORT option grille HEX coaxial with RGB LEDs lighting option always provide the perfect style for your boat, giving you years of pure fun while cruising, being over engineered and tested for Marine applications. The compact 6.5” speaker, with a depth of only 2.36 in. delivers a detailed and dynamic sound, making every outing memorable.
Component
SPORT LED COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
50
Power Handling - Peak W
100
Impedance Ohm
4
Depth mm (in.)
85 (3.25)
Tweeter diaphragm mm (in.)
24 (0.9)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
13 (0.5)
Frequency Response Hz
50 ÷ 23k
Woofer Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.)
12,9 x 2 + 11 x 1,9 (0.51 x 0.08 + 0.43 x 0.07)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±4,8 (0.19)
D mm
125
Re Ohm
3,3
Fs Hz
78
Le mH
0,109
Vas I
6,52
Mms g
13,5
Cms mm/N
0,31
BL T*m
4,8
Qts
0,82
Qes
0,95
Qms
6,1
Spl dB
88
A
172 mm
6.77 in.
B
128 mm
5.04 in.
C
85 mm
3.25 in.
D
60,5 mm
2.38 in.
F
24,5 mm
0.96 in.
HERTZ Marine 6.5" 2-Way Total Charcoal Coaxial Speaker - Pair...
$449.99
Hertz HMX 6.5 TC 6.5-inch Hi-End Marine Coaxial Speakers in Black (Pair)
HMX 6.5 TW hi-performance marine coaxial speakers, also available in the black option HMX 6.5 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Key Features
IP 65 Certification
Water Jet TestedThe protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
UV ResistantAccording to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea.
Salt Fog TestedTo satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
Features
Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust).
1.4" Neodymium magnet tweeter featuring a PEI material dome combined with faceplate and acoustic lens optimized for best off-axis dispersion and highest SPL.
Sound-transparent tone-on-tone stainless steel tweeter mesh grille providing efficient high-frequency transfer, attractive look and a rock-solid protection.
Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle application featuring polypropylene cone injected with UV inhibitors and co-molded Santoprene surround.
Aramid fiber spider with silicone-insulated lead wires ensuring durability and constant performance over time.
FEM optimized high-excursion mobile equipment driven by a massive magnetic group encapsulated into a marine-grade polymer injected basket.
Sealed built-in crossover with resettable solid-state tweeter protection circuit.
Gold-plated corrosion resistant terminals.
HERTZ Marine 6.5" 2-Way Total Charcoal Rgb Coaxial Speaker -...
$479.99
HMX 6.5 LD-TC hi-performance marine coaxial speakers with RGB LEDs lighting option, feature a tone-on-tone front mesh matching the grille color. The tweeter acoustic lens optimizes off-axis dispersion and maximized SPL.
The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion.
The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Product Details:
6-1/2" 2-way Coaxial Marine Speakers
Power Handling:
Peak: 300 watts per pair / 150 watts each
RMS: 150 watts per pair / 75 watts each
IP65 marine grade rating
Engineered and tested for UV, salt-fog, vibrations, water spray, thermal shock, and dust conditions
UV-Resistant Polypropylene cone material
Co-molded Santoprene Rubber speaker surround
1.4" PEI (Polyetherimide) Dome tweeters
Optimized tweeter faceplate and acoustic lens
Sound-transparent stainless steel tweeter mesh grille
Aramid fiber spider with silicone-insulated lead wires
FEM optimized high-excursion mobile equipment
Sealed built-in crossover with resettable solid-state tweeter protection circuit
Gold-plated corrosion resistant terminals
Multi-color RGB LED illumination (Hertz HM RGB 1 BK remote control sold separately)
1.26" voice coil
Impedance: 4 ohm
Top-mount Depth: 2.72"
Cutout Dimensions: 5.04"
Frequency Response: 50 - 25,000 Hz
Sensitivity: 89 dB
Authorized Internet Dealer
1-year Manufacturer's Warranty
Priced Per Pair
HERTZ Marine 6.5" 2-Way Total White Coaxial Speaker - Pair...
$419.99
HMX 6.5 TW hi-performance marine coaxial speakers, also available in the black option HMX 6.5 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
75
Power Handling - Peak W
150
Impedance Ohm
4
Depth mm (in.)
95,6 (3.76)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
50 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
78,5 x 32 x 17 (3.09 x 1.26 x 0.67)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±6,65 (0.26)
D mm
125
Re Ohm
3,5
Fs Hz
65
Le mH
0,53
Vas I
8,8
Mms g
14
Cms mm/N
0,4
BL T*m
5,2
Qts
0,7
Qes
0,75
Qms
11,5
Spl dB
89
A
172,2 mm
6.78 in.
B
128 mm
5.04 in.
C
95,6 mm
3.76 in.
D
69 mm
2.72 in.
F
26,6 mm
1.05 in.
HERTZ Marine 6.5" 2-Way White / Grey Rgb Coaxial Speaker...
$499.99
HMX 6.5 S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.
Component
HI-END LED COAX
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
75
Power Handling - Peak W
150
Impedance Ohm
4
Depth mm (in.)
95,6 (3.76)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
50 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
78,5 x 32 x 17 (3.09 x 1.26 x 0.67)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1 (2.2)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±6,65 (0.26)
D mm
125
Re Ohm
3,5
Fs Hz
65
Le mH
0,53
Vas I
8,8
Mms g
14
Cms mm/N
0,4
BL T*m
5,2
Qts
0,7
Qes
0,75
Qms
11,5
Spl dB
89
A
172,2 mm
6.78 in.
B
128 mm
5.04 in.
C
95,6 mm
3.76 in.
D
69 mm
2.72 in.
F
26,6 mm
1.05 in.
HERTZ Marine 8" (200Mm) 2-Way Black Coaxial Speaker - Pair...
$524.99
The HMX 8 hi-performance marine coaxial speakers, also available in the black option HMX 8-C, is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
HMX 8 / C224 (8.8) mm (in.) | 123 (4.84) mm (in.) | Hi-end Coax | 200 W | 4 Ohm
The HMX 8 hi-performance marine coaxial speakers, also available in the black option HMX 8-C, is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
A
225 mm
8.86 in.
B
180 mm
7.09 in.
C
123 mm
4.84 in.
D
91 mm
3.58 in.
F
32 mm
1.26 in.
HERTZ Marine 8" (200Mm) 2-Way Rgb Black / Grey Coaxial...
$679.99
HMX 8 S-LD-G marine coaxial speaker features a sports paintable grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.
Component
HI-END LED COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
A
225 mm
8.86 in.
B
180 mm
7.09 in.
C
128.6 mm
5.06 in
D
91 mm
3.58 in.
F
37.6 mm
1.48 in.
HERTZ Marine 8" (200Mm) 2-Way Rgb Black Clamp Tower Coaxial...
$1,014.99
Order a Quantity of 2 for a Pair, this is sold as 1 Speaker per Package
HTX 8 M-CL-W Marine Tower Coaxial Speaker (white)
Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting.
The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released.
This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology.
“Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.
Features
SALT FOG TESTED
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
WATER JET TESTED
The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
UV RESISTANT
According to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea.
Specifications
Power Handling - Peak W
200
Power Handling - Continuous W
100
Impedance Ω
4
Frequency response Hz
45 ÷ 25k
Sensitivity dB SPL
91
Woofer size mm (in.)
200 (8)
Tweeter size mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter voice coil Ø mm (in.)
20 (0.8)
Woofer magnet
High density flux ferrite
Tweeter magnet
Neodymium
Woofer cone
Polypropylene with UV inhibitors
Tweeter dome
PEI
HERTZ Marine 8" (200Mm) 2-Way Rgb Black Coaxial Speaker Pair...
$594.99
The HMX 8 LD hi-performance marinet coaxial speakers with RGB LEDs lighting option, also available in the black option HMX 8-LD-C, is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
HMX 8 LD / C224 (8.8) mm (in.) | 123 (4.84) mm (in.) | Hi-end Led Coax | 200 W | 4 Ohm
The HMX 8 LD hi-performance marinet coaxial speakers with RGB LEDs lighting option, also available in the black option HMX 8-LD-C, is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END LED COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
A
225 mm
8.86 in.
B
180 mm
7.09 in.
C
123 mm
4.84 in.
D
91 mm
3.58 in.
F
32 mm
1.26 in.
HERTZ Marine 8" (200Mm) 2-Way Rgb Grey / White Coaxial...
$679.99
HMX 8 S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.
Component
HI-END LED COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
A
225 mm
8.86 in.
B
180 mm
7.09 in.
C
128.6 mm
5.06 in
D
91 mm
3.58 in.
F
37.6 mm
1.48 in.
HERTZ Marine 8" (200Mm) 2-Way Rgb Total White Coaxial Speaker...
$649.99
HMX 8 LD-TW hi-performance marine coaxial speakers with RGB LEDs lighting option, also available in the black option HMX 8 LD-TC, feature a tone-on-tone front mesh matching the grille colour. The tweeter acoustic lens optimizes off-axis dispersion and maximized SPL.The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END LED COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
A
225 mm
8.86 in.
B
180 mm
7.09 in.
C
123 mm
4.84 in
D
91 mm
3.58 in.
F
32 mm
1.26 in.
HERTZ Marine 8" (200Mm) 2-Way Rgb White Clamp Tower Coaxial...
$1,014.99
Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting. The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released. This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.
1. Hertz Pure Marine Certified Product stamp featuring the IP65 protection grade, ASTM-D4329 standards for UV resistance and ASTM-B117 for salt fog operability.
2. Equipped with dedicated 8” coaxial speaker featuring a long-throw 32 mm (1.26”) voice coil woofer with polypropylene cone injected with UV inhibitors and 1.4” Neodymium magnet tweeter.
3. RGB led lighting creates sophisticated atmosphere, adding tons of class to your vessel. Front RGB lighting is included built-in the front grille, while rear RGB lighting is an add-on with the specifically developed HTX RGB LOGO.1 accessory (available both in black and white color).
4. Q-OS² (Quick Orientation & Release for Sound & Safety) technology.
- Durability thanks to the solid 316 Stainless Steel construction;
- Tower can be quickly oriented within 18 steps (20° each) along horizontal axis for best sound projection and diffusion over the listening area;
- Quick Mechanical/Electrical release for security/anti-theft and cleaning;
- Multi-pole high current connection self-contained into the clamp structure;
- Clamp structure includes rubber inserts for vibrations damping and fits both round roll-bar [38 mm, 76 mm (1-1/2” to 3”)] and square roll-bar or roof mounting by detaching clamp basement upper part. Optional fitting accessories available for major OEM brands.
5. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.
HERTZ Marine 8" (200Mm) 2-Way Rgb White Coaxial Speaker Pair...
$594.99
Hertz HMX 8-LD - 8 Inch Speakers RGB LED 200W Pair
The HMX 8 LD White 8" hi-performance marinet coaxial speakers with RGB LEDs lighting option, are optimized to perform in infinite baffle, with a solid bass and an outstanding output.
IP Protection: IP65
Peak Power Handling: 200 Watts
RMS Power: 100 Watts
Impedance: 4Ω
Frequency response: 45Hz - 25kHz
Sensitivity SPL: 91dB
Woofer size: 200mm (8")
Tweeter size: 36mm (1.4")
Woofer Voice Coil Ø: 32mm (1.26")
Tweeter voice coil Ø: 20mm (0.8")
Supplied as a pair
The HMX 8 LD hi-performance marinet coaxial speakers with RGB LEDs lighting option, are optimized to perform in infinite baffle, with a solid bass and an outstanding output. The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion.
The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
RGB Multicolour
Built-in RGB led lighting creates sophisticated atmosphere, adding a touch of class to your vessel. Use the optional HMRGB1BK RGB Controller for full 256 colour step control, lighting presets and music tempo control. Alternatively the speakers can be permanently set to either Red, Green, Blue, Yellow, Magenta, Cyan or White lighting via a 12VDC Supply.
Water Jet Tested
The protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
UV Resistant
According to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea.
Salt Fog Tested
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
HERTZ Marine 8" (200Mm) 2-Way Total Charcoal Coaxial Speaker -...
$589.99
Hertz HMX 8 TC 8-inch Hi-End Marine Coaxial Speakers in Black (Pair)
HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Key Features
IP 65 Certification
Water Jet TestedThe protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
UV ResistantAccording to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea.
Salt Fog TestedTo satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
Features
Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust).
1.4” Neodymium magnet tweeter featuring a PEI material dome combined with faceplate and acoustic lens optimized for best off-axis dispersion and highest SPL.
Sound-transparent tone-on-tone stainless steel tweeter mesh grille providing efficient high-frequency transfer, attractive look and a rock-solid protection.
Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle application featuring polypropylene cone injected with UV inhibitors and co-molded Santoprene surround.
Aramid fiber spider with silicone-insulated lead wires ensuring durability and constant performance over time.
FEM optimized high-excursion mobile equipment driven by a massive magnetic group encapsulated into a marine-grade polymer injected basket.
Sealed built-in crossover with resettable solid-state tweeter protection circuit.
Gold-plated corrosion resistant terminals.
HERTZ Marine 8" (200Mm) 2-Way Total White Coaxial Speaker -...
$545.00
HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.4)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
Physical Specs
A
225 mm
8.86 in
B
180 mm
7.09 in
C
123 mm
4.84 in.
D
91 mm
3.58 in.
F
32 mm
1.26 in
HERTZ Mille Legend 3" 2-Way Component Speaker - Pair (Mlk...
$1,469.99
The MLK 700.3 Legend car audio speakers system aims at offering a mid-high frequency range of excellence, to combine with a Legend woofer with a choice between ML 1650.3 and ML 1800.3 actively filtered in a multi-amplified configuration. MLK 700.3 Legend is composed of the ML 700.3 Legend Extended Midrange, the ML 280.3 Legend tweeter and the MLCX 2 TM.3 dedicated crossover that features the unique Mid-Countour control with its three-position selector, acting on the mid frequencies of the ML 700.3 Legend midrange by varying the cross-point with the tweeter to obtain the desired sound. The V-cone® exponential profile without the traditional dustcap gets close to the perfect one, generating exceptional dispersion: thanks to the synergistic action of these technological elements, ML700.3 Legend boasts outstanding high frequency extension making it possible to build purist two-way systems in combination with ML 1650.3 Legend or ML 1800.3 Legend. Thanks to this configuration, where there is only one cross-point, phase rotations are limited to the minimum, ensuring excellent soundstage and disarming timbre consistency. With the mid-high frequencies being handled by the ML700.3 Legend and the low ones by the ML1800.3 Legend, the whole audio range is reproduced with transducers built with the same materials and based on the same electro-acoustic structure; that doesn’t happen with woofer and tweeter, since due to its own nature the tweeter is different in materials and structure. The uniformity in materials and structures creates very high timbre consistency, so the speakers can “disappear” and leave room to emotions.
Component
System
Size mm (in.)
70 (3)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Tweeter diaphragm mm (in.)
35 (1.38)
Woofer Voice Coil Ø mm (in.)
20 (0.8)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Sensitivity dB SPL
Midrange 90 Tweeter 92
Frequency Response Hz
200 ÷ 28k
Crossover Cut off
4.5 kHz - 6/12 dB Oct.
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
0,210 (0.46)
Weight of one component - Tweeter kg (lb)
0,1 (0.22)
Weight of one component - Crossover kg (lb)
0,57 (1.26)
D mm
65
Re Ohm
3,8
Fs Hz
110
Le mH
0,05
Vas I
1,1
Mms g
2,7
Cms mm/N
0,7
BL T*m
3,3
Qts
0,57
Qes
0,67
Qms
4
Spl dB
90
HERTZ Mille Legend 3" Midrange Speaker - Pair (Ml 700.3...
$629.99
The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the threespoke anti-resonant aluminium alloy basket with vented holes.Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions.
1. Neodymium magnet optimized with FEA simulations, for superior dynamics and control.2. Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.3. Extremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.4. Exponential V-cone® with optimized geometry for utmost linearity and dispersion.5. CONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.6. “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.7. Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.8. Junction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.9. Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.10. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.11. Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo.
Component
Mid-range
Size mm (in.)
70 (3)
Power Handling - Peak W
100
Power Handling - Peak Note
(Hi-Pass filtered @ 250Hz - 12dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20 (0.8)
Frequency Response Hz
200 - 20k
Magnet size D x d x h mm (in.)
45 x 25 x 3,5 (1.77 x 0.98 x 0.13)
Weight of one speaker kg (lb.)
0,21 (0.46)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibres
D mm
65
Re Ohm
3,8
Fs Hz
110
Le mH
0,05
Vas I
1,1
Mms g
2,7
Cms mm/N
0,7
BL T*m
3,3
Qts
0,57
Qes
0,67
Qms
4
Spl dB
90
A
87,8 mm
3.45 in
B
74 mm
2.91 in
C
47 mm
1.85 in
D
41,3 mm
1.62 in
E
93 mm
3.66 in.
F
17 mm
0.67 in.
HERTZ Mille Legend 6.5" 2-Way Component Speaker - Pair (Mlk...
$1,099.99
The MLK 165.3 Legend car audio speakers system is composed of the ML 28.3 Legend tweeter and the ML 165.3 Legend woofer with the MLCX 165.3 dedicated crossover. The woofer originates from the ML 1650.3 Legend, inheriting all its technologies such as the Boundary Free Surround, the V-cone profile Pressed-pulp cone with cotton fibres, the six spoke aluminium basket with vented holes; however, it has been designed employing a high density ferrite magnet assembly, characterising its emission in the mid frequency range. The ML 28.3 Legend tweeter mounts the same Neodymium magnet assembly as the ML 280.3 Legend’s and features all the optimizations made with FEA methods on the dome profile, and that it shares with its “older brother”, except for the most esoteric features such as the die-cast aluminium faceplate, the CNC machined body made from solid aluminium block and the copper short circuit ring. Like MLCX 2 TW.3, also the MLCX 165.3 crossover features the “Hi-Contour” control to adjust the ML 28.3 tweeter cut-off frequency and so the cross-point with the ML 165.3 woofer, according to the position of the two speakers in the car. Through the tweeter three position level control, with 2 dB step attenuation, the level for a correct timbre balance can be fine-tuned according to one’s own tastes.
Component
System
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
150
Power Handling - Peak W
300
Impedance Ohm
4
Tweeter diaphragm mm (in.)
35 (1.38)
Woofer Voice Coil Ø mm (in.)
36 (1.4)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Sensitivity dB SPL
91
Frequency Response Hz
40 ÷ 25k
Crossover Cut off
3.5 kHz - 12 dB Oct
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
1,65 (3.64)
Weight of one component - Tweeter kg (lb)
0,075 (0.16)
Weight of one component - Crossover kg (lb)
0,37 (0.82)
D mm
132
Re Ohm
3,3
Fs Hz
65
Le mH
0,37
Vas I
9
Mms g
17
Cms mm/N
0,3
BL T*m
6
Qts
0,57
Qes
0,64
Qms
5,4
Spl dB
92
HERTZ Mille Legend 6.5" 2-Way Component Speaker - Pair (Mlk...
$1,784.99
he Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound.
Component
System
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
150
Power Handling - Peak W
300
Impedance Ohm
4
Tweeter diaphragm mm (in.)
35 (1.38)
Woofer Voice Coil Ø mm (in.)
36 (1.4)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Sensitivity dB SPL
92
Frequency Response Hz
40 ÷ 25k
Crossover Cut off
2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF)
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
1.29 (2.84)
Weight of one component - Tweeter kg (lb)
0,1 (0.22)
Weight of one component - Crossover kg (lb)
0,57 (1.26)
D mm
132
Re Ohm
3,3
Fs Hz
65
Le mH
0,24
Vas I
8,3
Mms g
17,5
Cms mm/N
0,3
BL T*m
7
Qts
0,47
Qes
0,52
Qms
5,3
Spl dB
93
HERTZ Mille Pro 3" Midrange Speaker - Pair (Mp 70.3...
$314.99
The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range.
Component
Mid-range
Size mm (in.)
70 (3)
Power Handling - Peak W
100
Power Handling - Peak Note
(Hi-Pass filtered @250Hz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20 (0.8)
Frequency Response Hz
180 ÷ 18k
Magnet size D x d x h mm (in.)
19.7 x 0 x 2 (0.78 x 0 x 0.08)
Weight of one speaker kg (lb.)
0.17 (0.37)
Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
D mm
65
Re Ohm
3,7
Fs Hz
110
Le mH
0,12
Vas I
1
Mms g
2,9
Cms mm/N
0,7
BL T*m
2,8
Qts
0,82
Qes
1
Qms
4,6
Spl dB
88
A
87,8 mm
3,46 in.
B
73 mm
2,87 in.
C
50 mm
1.97 in.
D
44 mm
1.73 in.
E
93 mm
3.66 in.
F
17 mm
0.67 in.
HERTZ Mille Pro 5" 2-Way Component Speaker - Pair (Mpk...
$629.99
The MPK 130.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 130.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the MP 130.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one..
Component
System
Size mm (in.)
130 (5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Sensitivity dB SPL
91
Frequency Response Hz
60 ÷ 22,5k
Crossover Cut off
3,5 kHz
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
0.95 (2.09)
Weight of one component - Tweeter kg (lb)
0.07 (0.15)
Weight of one component - Crossover kg (lb)
0.16 (0.35)
D mm
110
Re Ohm
3,1
Fs Hz
90
Le mH
0,25
Vas I
3
Mms g
10,5
Cms mm/N
0,24
BL T*m
5,3
Qts
0,64
Qes
0,74
Qms
5,1
Spl dB
92
HERTZ Mille Pro 6.5" 2-Way Coaxial Speaker - Pair (Mpx...
$419.99
The coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
1. CONCENTRIC COAXIAL TWEETER: built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.2. TWEETER SUPPORT WORKING AS A REAR CHAMBER: sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.3. 36 MM PURE COPPER WOOFER VOICE COIL: wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.4. PRESSED-PULP CONE WITH COTTON FIBERS: combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.5. “BOUNDARY FREE” RUBBER SURROUND: for improved efficiency and wider midbass frequency. (Logo Boundary Free)6. OVER-SIZED FERRITE MAGNET: combined with very low carbon content iron plates, for low distortion at high power levels.7. BASKET: low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.8. ANTI-VIBRATION RUBBER MAGNET COVER: to damp spurious vibrations.
Component
Coaxials
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
36 (1.42)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 21,5k
Woofer Magnet size D x d x h mm (in.)
90 x 45 x 17 (3.54 x 1.77 x 0.67)
Tweeter Magnet size D x h mm (in.)
29.5 x 22 x 4 (1.16 x 0.87 x 0.16)
Weight of one speaker kg (lb.)
1.27 (2.8)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±6 (0.24)
D mm
132
Re Ohm
3,1
Fs Hz
90
Le mH
0,01
Vas I
4
Mms g
18,9
Cms mm/N
0,15
BL T*m
5,8
Qts
0,88
Qes
1,06
Qms
5,5
Spl dB
92
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74 mm
2.91 in.
D
62,6 mm
2.46 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
HERTZ Mille Pro 6.5" 2-Way Component Speaker - Pair (Mpk...
$629.99
The MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the MP 165.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.
Component
System
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
110
Power Handling - Peak W
220
Impedance Ohm
4
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Sensitivity dB SPL
92
Frequency Response Hz
40 ÷ 22,5k
Crossover Cut off
3,5 kHz
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
1.07 (2.36)
Weight of one component - Tweeter kg (lb)
0.07 (0.15)
Weight of one component - Crossover kg (lb)
0.16 (0.35)
D mm
132
Re Ohm
3,1
Fs Hz
70
Le mH
0,3
Vas I
9,5
Mms g
14,9
Cms mm/N
0,36
BL T*m
5,5
Qts
0,58
Qes
0,67
Qms
4,6
Spl dB
93
HERTZ Mille Pro 6.5" 2-Way Component Speaker - Pair (Mpk...
$839.99
The MPK 1650.3 car audio speakers system is the top of the range two way system of the Mille PRO line. The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28 kHz, a record for a tweeter featuring a 28 mm voice coil. An elegant and compact angled tweeter support is provided with the system: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations. The crossover MPCX 165.3 creates the optimal tone balance between the MP 28.3 tweeter and MP 165P.3 woofer. It features bi-metallic capacitors with polyester dielectric, for maximum acoustic transparency and air wound inductors built on pure copper wire with up to 1mm diameter eliminating saturation. It also mounts wire-wound type resistors with low parasite inductance. The two positions Hi-Contour control provides the ability to fine tune the system frequency response optimizing it according to the different speakers positions. Most of all, the listeners can achieve their favourite sound thanks to the three-position control for the tweeter emission level with 2 dB steps (+2/0/-2dB) attenuation.
Component
System
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
125
Power Handling - Peak W
250
Impedance Ohm
3
Tweeter diaphragm mm (in.)
35 (1.38)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Sensitivity dB SPL
93
Frequency Response Hz
45 ÷ 25k
Crossover Cut off
3 kHz (Hi-Cont. = ON) , 4 kHz (Hi-Cont. = OFF)
Crossover Type
2 Way Passive Crossover
Adjustment
Tweeter-Level +2 / 0 / -2 dBHi-Contour ON/OFF
Weight of one component - Woofer
1.20 (2.65)
Weight of one component - Tweeter kg (lb)
0,075 (0.16)
Weight of one component - Crossover kg (lb)
0,37 (0.82)
HERTZ Mille Pro 6.5" 2-Way Component Speaker - Pair (Mpk...
$754.99
The MPK 165P.3 car audio speakers system energy in the mid-low range ensures a unique listening experience, creating the ideal set up alongside a powerful subwoofer section. The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The MPK 165P.3 timbre balance is entrusted to the MPCX 2P.3 crossover featuring a copper inductor with a 1 mm diameter wire to filter the MP 165P.3, which, with its nominal 3 Ω requires high impulse currents. The tweeter MP 25.3 12dB/Octave crossover is built with extremely high quality 160V bi-metallized polyester film capacitor and an air coil inductor. The tweeter (MP 25.3) level control (0/+2.5dB) provides the ability to adapt the system response to the listener preferences and considering the components installation position.
Component
System
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
115
Power Handling - Peak W
230
Impedance Ohm
3
Tweeter diaphragm mm (in.)
29 (1.14)
Woofer Voice Coil Ø mm (in.)
25 (1)
Tweeter Voice Coil Ø mm (in.)
25 (1)
Sensitivity dB SPL
93
Frequency Response Hz
45 ÷ 22,5k
Crossover Cut off
4 kHz
Crossover Type
2 Way Passive Crossover
Weight of one component - Woofer
1.20 (2.65)
Weight of one component - Tweeter kg (lb)
0.07 (0.15)
Weight of one component - Crossover kg (lb)
0.17 (0.37)
D mm
132
Re Ohm
2,6
Fs Hz
75
Le mH
0,28
Vas I
8
Mms g
15,1
Cms mm/N
0,3
BL T*m
5,45
Qts
0,56
Qes
0,63
Qms
5,2
Spl dB
94
HERTZ Mille Pro 6.5" 3-Way Component Speaker - Pair (Mpk...
$994.99
The three way MPK 163.3 car audio speakers system is dedicated to those who want the best: the MP 70.3 midrange featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. The dedicated MPCX 3.3 crossover provides optimized crossover points to exploit the midrange remarkable extension using ultra-selected components.
HERTZ Mille Pro 6X9" 3-Way Coaxial Speaker - Pair (Mpx...
$524.99
The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening.
Component
Coaxials
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
130
Power Handling - Peak W
260
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
38 (1.5)
Tweeter Voice Coil Ø mm (in.)
28 (1.1)
Frequency Response Hz
30 ÷ 24k
Woofer Magnet size D x d x h mm (in.)
107 x 45 x 20 (4.21 x 1.77 x 0.79)
Weight of one speaker kg (lb.)
2.28 (5.03)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech mm (in.)
±8 (0.31)
D mm
169
Re Ohm
3
Fs Hz
50
Le mH
0,07
Vas I
24
Mms g
30
Cms mm/N
0,34
BL T*m
7,2
Qts
0,43
Qes
0,55
Qms
2
Spl dB
94
A
241 mm
9.49 in.
B
223 mm
8.74 in.
C
108 mm
4.25 in.
D
90 mm
3.54 in.
E
267 mm
10.53 in.
F
38,5 mm
1.52 in.
HERTZ Powersport 8" (200Mm) 2-Way Black Coaxial Speaker - Pair...
$545.00
The HMX 8 S hi-performance powersport coaxial speakers is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
Powersport coaxial
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
A
225 mm
8.86 in.
B
180 mm
7.09 in.
C
123 mm
4.84 in.
D
91 mm
3.58 in.
F
32 mm
1.26 in.
Frequency response
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
