TORQIT Isuzu D-MAX 4JJ3 3.0L (Post-2020) Power Module – CRMQ2006
$1,890.00
Performance Gain: Up to 36kW / 75Nm
Boost the performance of your Isuzu D-MAX 4JJ3 3.0L (Post-2020) with the TORQIT Power Module (CRMQ2006). Specifically engineered for the latest 3.0L turbo diesel D-MAX, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery across the rev range. By extracting more usable energy from every drop of fuel, it enhances everyday drivability while maintaining the reliability expected from the Isuzu 4JJ3 engine.
Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque reduces engine strain and provides greater pulling power when you need it most. From daily commuting to off-road adventures, the TORQIT Power Module delivers a noticeable improvement in performance without requiring permanent vehicle modifications.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 36kW & 75Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing caravans, trailers, boats and heavy loads
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Mazda BT-50 4JJ3 (Post-2020) Power Module – CRMQ2009
$1,890.00
Performance Gain: Up to 31kW / 61Nm
Enhance the performance of your Mazda BT-50 4JJ3 (Post-2020) with the TORQIT Power Module (CRMQ2009). Specifically engineered for the latest BT-50 platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, improved throttle response and smoother power delivery across the entire rev range. By extracting more usable energy from every drop of fuel, you'll enjoy improved performance without compromising everyday reliability.
Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque helps reduce engine strain and provides greater pulling power when you need it most. From daily driving to off-road adventures, the TORQIT Power Module delivers a more responsive and enjoyable driving experience.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 31kW & 61Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Improves power, torque and throttle response
Enhances fuel efficiency through optimised engine performance
Vehicle-specific tuning for safe and reliable operation
Reduces engine strain when towing caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Nissan Navara NP300 (Pre-2019) Power Module – CRMQ2007
$1,890.00
Performance Gain: Up to 34kW / 75Nm
Unlock more power from your Nissan Navara NP300 (Pre-2019) with the TORQIT Power Module (CRMQ2007). Designed specifically for pre-2019 NP300 models, this advanced plug-and-play performance module safely enhances power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module refines your engine's air-to-fuel ratio to maximise combustion efficiency, allowing your Navara to produce more usable power while using fuel more effectively. The result is quicker throttle response, stronger acceleration and smoother power delivery for everyday driving, off-road adventures and demanding work applications.
Whether you're towing a caravan, trailer, boat or carrying heavy equipment, the additional torque helps reduce engine strain while improving towing performance and overall drivability. With a simple plug-and-play installation and no permanent modifications required, it's an easy upgrade that delivers noticeable performance improvements.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 34kW & 75Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Ineos Grenadier (2025+) Power Module – CRMQ2073
$1,890.00
Performance Gain: Up to 33kW / 84Nm
Maximise the capability of your Ineos Grenadier (2025+) with the TORQIT Power Module (CRMQ2073). Purpose-built for the latest Grenadier platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By extracting more usable energy from every drop of fuel, it enhances both on-road refinement and off-road performance while maintaining factory reliability.
Whether you're tackling remote touring, technical off-road tracks or towing a caravan, trailer or boat, the additional power and torque provide greater pulling performance while reducing engine strain under load. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 33kW & 84Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing caravans, trailers, boats and heavy loads
Ideal for touring, off-road adventures and everyday driving
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota Tundra Power Module – CRMQ2060
$1,890.00
Performance Gain: Up to 31kW / 85Nm
Unlock the full potential of your Toyota Tundra with the TORQIT Power Module (CRMQ2060). Specifically engineered for the Toyota Tundra, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
By refining the engine's air-to-fuel ratio, the TORQIT Power Module improves combustion efficiency to deliver stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is a more responsive driving experience with enhanced performance for both everyday driving and demanding towing applications.
Whether you're towing a large caravan, boat, horse float or heavy trailer, the additional torque helps reduce engine strain while providing greater pulling power and improved confidence on steep inclines and long highway journeys. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 31kW & 85Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats and commercial towing applications
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota Hilux 2.8L D4D (2016–2018) Power Module – CRMQ2005
$1,890.00
Performance Gain: Up to 34kW / 77Nm
Enhance the capability of your Toyota Hilux 2.8L D4D (2016–2018) with the TORQIT Power Module (CRMQ2005). Specifically engineered for the 2.8L D4D turbo diesel engine, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module precisely adjusts the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By unlocking additional performance while maintaining factory reliability, it transforms the way your Hilux performs both on and off the road.
Whether you're towing a caravan, trailer or boat, carrying heavy tools for work, or heading off-road, the increased torque helps reduce engine strain and provides greater pulling power when it matters most. Installation is completely plug-and-play, with no permanent modifications required.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 34kW & 77Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats, off-road touring and work vehicles
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota LandCruiser 300 Series (2016+) Power Module – CRMQ2002
$1,890.00
Performance Gain: Up to 47kW / 104Nm
Transform the performance of your Toyota LandCruiser 300 Series (2016+) with the TORQIT Power Module (CRMQ2002). Engineered specifically for the LandCruiser 300 Series, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is noticeably improved drivability while maintaining the reliability and refinement expected from the LandCruiser platform.
Whether you're towing a large caravan, horse float or boat, exploring Australia's toughest off-road terrain, or covering long-distance touring kilometres, the substantial increase in power and torque reduces engine strain and provides greater confidence under load. Installation is quick and completely plug-and-play, requiring no permanent modifications to your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 47kW & 104Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for touring, towing, off-road adventures and everyday driving
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota Prado 2.8L Gen 3 (08/2020+) Power Module –...
$1,890.00
Performance Gain: Up to 33kW / 58Nm
Take your Toyota Prado 2.8L Gen 3 (08/2020+) to the next level with the TORQIT Power Module (CRMQ2004). Specifically engineered for the latest 2.8L turbo diesel Prado, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module refines the engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery across the rev range. By unlocking additional performance while maintaining factory reliability, it provides a more enjoyable and capable driving experience in all conditions.
Whether you're towing a caravan, camper trailer or boat, exploring remote tracks or commuting every day, the additional power and torque reduce engine strain and provide greater pulling performance when you need it most. Installation is quick and completely plug-and-play, with no permanent modifications required.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 33kW & 58Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for touring, towing, off-road adventures and everyday driving
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota Hilux 2.8L Gen 3 (08/2020+) Power Module –...
$1,890.00
Performance Gain: Up to 35kW / 107Nm
Unlock the full potential of your Toyota Hilux 2.8L Gen 3 (08/2020+) with the TORQIT Power Module (CRMQ2003). Purpose-built for the latest 2.8L turbo diesel Hilux, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is a more responsive, capable and enjoyable driving experience while maintaining the factory reliability of your Hilux.
Whether you're towing a caravan, camper trailer or boat, carrying heavy loads for work, or heading off-road, the significant increase in torque reduces engine strain and provides stronger pulling power when you need it most. Installation is quick and completely plug-and-play, requiring no permanent modifications to your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 35kW & 107Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats, off-road touring and work vehicles
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota LandCruiser 200 Series (2016+) Power Module – CRMQ2001
$1,890.00
Performance Gain: Up to 61kW / 103Nm
Experience a significant performance upgrade with the TORQIT Power Module (CRMQ2001) for the Toyota LandCruiser 200 Series (2016+). Purpose-built for the LandCruiser's turbo diesel engine, this premium plug-and-play performance module safely delivers increased power, torque and improved fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module enhances the engine's air-to-fuel ratio to maximise combustion efficiency, resulting in stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. Whether driving around town or tackling long-distance touring, you'll enjoy improved drivability without compromising factory reliability.
Perfect for towing large caravans, boats, horse floats or heavy work trailers, the substantial increase in power and torque helps reduce engine strain while providing greater pulling performance on steep inclines and challenging terrain. Installation is completely plug-and-play, requiring no cutting, wiring or permanent modifications.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 61kW & 103Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for touring, towing, off-road adventures and commercial applications
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota LandCruiser 79 Series (2016+) Power Module – CRMQ2000
$1,890.00
Performance Gain: Up to 36kW / 75Nm
Maximise the capability of your Toyota LandCruiser 79 Series (2016+) with the TORQIT Power Module (CRMQ2000). Purpose-built for the iconic 79 Series turbo diesel, this premium plug-and-play performance module safely delivers increased power, torque and improved fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module precisely adjusts the engine's air-to-fuel ratio to enhance combustion efficiency, producing stronger acceleration, improved throttle response and smoother power delivery throughout the rev range. The result is a more responsive LandCruiser that maintains factory reliability while offering noticeably improved performance on and off the road.
Whether you're towing heavy trailers, transporting equipment on the job site or tackling Australia's toughest off-road tracks, the additional torque helps reduce engine strain and delivers greater pulling power when you need it most. Installation is fast and completely plug-and-play, requiring no cutting, wiring or permanent modifications.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 36kW & 75Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for touring, towing, off-road adventures and commercial applications
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Landcruiser 300 Series Power Module - CRMQ2002
$1,701.00
$1,890.00
Torqit Power Module Performance Chip For 300 Series Landcruiser
Performance Gain: 47KW / 104NM
The Toyota 300 Series Landcruiser Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicle’s onboard computer.
The Torqit Power Module uses less fuel, yet creates more power by maximising the energy output from each drop.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. You’ll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you’re towing, the Torqit Power Module ensures you get the most life possible out of your vehicle’s engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
Power Module Key Features
5-year product warranty
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian condition
TORQIT D40 Navara / Pathfinder 2.5L TD 12/2005É Power Module...
$1,701.00
$1,890.00
Unlock your vehicle's performance potential with the TORQIT Power Module. Designed to safely optimise your engine's factory calibration, this plug-and-play performance module delivers improved power, torque and drivability for everyday driving, towing and off-road adventures.
By optimising the air-to-fuel ratio, the TORQIT Power Module helps maximise engine efficiency, providing stronger acceleration, smoother throttle response and improved pulling power. Whether you're towing a caravan, trailer or boat, you'll enjoy enhanced performance without compromising engine reliability.
Key Features
Improves power, torque and throttle response
Optimises fuel efficiency and engine performance
Ideal for towing, touring and off-road driving
Vehicle-specific tuning for safe, reliable operation
Simple plug-and-play installation
Tested for demanding Australian conditions
Backed by a 5-year warranty
FRONT RUNNER Double Jerry Can Holder Replacement Strap - JCHO015
$106.20
$118.00
Front Runner Replacement Top Strap for Jerry Can Holder
Restore the security and functionality of your Front Runner Jerry Can Holder with this replacement top strap. Designed specifically as a replacement for the JCHO014 Jerry Can Holder, this heavy-duty strap securely fastens your jerry cans in place, helping eliminate rattling, movement, and wear during both on-road and off-road travel.
Constructed from black powder-coated stainless steel, the strap is built to withstand harsh environments while providing long-lasting corrosion resistance. The integrated stainless steel cross brace and safety catch ensure your fuel containers remain firmly secured, while the strap design covers the jerry can caps for added security.
Key Features
Replacement top strap designed for the Front Runner JCHO014 Jerry Can Holder.
Securely fastens jerry cans to minimise movement and vibration.
Helps eliminate rattling and wear during travel.
Features a durable stainless steel cross brace.
Integrated safety catch for enhanced security.
Strap covers the jerry can caps for additional protection.
Compatible with padlocks for theft deterrence.
Manufactured from black powder-coated stainless steel.
Benefits
Provides a secure, no-rattle mounting solution.
Helps protect jerry cans from damage caused by movement.
Offers added security when used with a compatible padlock.
Built to withstand demanding off-road and touring conditions.
Compatibility
Designed specifically as a replacement for the Front Runner JCHO014 Jerry Can Holder.
Compatible with optional padlocks, including RRAC134.
Important Information
This product includes the replacement top strap only.
Jerry can holder, jerry cans, and padlock are sold separately.
Ensure proper installation before use.
Construction
Material: Black powder-coated stainless steel.
Corrosion-resistant finish for long-term durability.
Designed for rugged touring and off-road applications.
DIRECTION-PLUS Fuel Manager Pre-Filter+Catch Can Kit Everest Ford Ranger Bi-Turbo...
$681.30
$757.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
Direction Plus™ Fuel Manager Pre-Filter + Provent Ultimate Catch Can Dual Kit – FMPV664DPK is designed and engineered in Australia to suit:
Ford Everest YNWS (2.0L 4cyl) 2018-2022
Ford Ranger YNWS (2.0L 4cyl) 2019-2022
HOW DOES IT WORK?
FUEL MANAGER PRE-FILTER
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Pre-Filter+Catch Can Kit Land Cruiser 70 ()...
$836.10
$929.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
The Direction-Plus™ Fuel Manager Pre-Filter + Provent Ultimate Catch Can Dual Kit – FMPV642DPK is designed and engineered in Australia to suit:
Toyota Landcruiser 70 series 1GD-FTV (2.8L 4cyl) 2023 – On
HOW DOES IT WORK?
FUEL MANAGER PRE-FILTER
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Pre-Filter + Catch Can Kit Land Cruiser...
$814.50
$905.00
The Direction-Plus™ PreLine-Plus / Provent Dual Kit FMPV642DPK fits Toyota Landcruiser 70 series (2018-2021) models. It’s the ultimate defence against carbon build-up and water contamination with the Fuel Manager pre-filter kit and up to 98% oil separation efficiency with our ProVent kit.
With this dual kit you can‘t go wrong! Protect your investment 24 hours a day, 365 days a year.
HOW IT WORKS
FUEL MANAGER
Direction Plus™ Pre-Fuel Filter will be installed between the fuel tank and the O.E.M fuel filter which will remove the majority of water and particle contamination, leaving the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
PROVENT OIL SEPARATOR
Direction Plus™ ProVent oil separator protects your diesel engine by reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance.
Direction Plus™ ProVent system is specifically designed to separate and redirect oil and air from blow-by gas produced from within the crankcase as it also provides the option of returning the oil back to the sump
DIRECTION-PLUS Fuel Manager Pre-Filter + Catch Can Kit Land Cruiser...
$821.70
$913.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Combo Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
The Direction-Plus™ Fuel Manager Pre-Filter + ProVent Ultimate Catch Can Combo Kit – FMPV635DPC is designed and engineered in Australia to suit:
Toyota Land Cruiser 300 Series (V6 Diesel F33A-FTV) 2022 – On
Please note: Fuel Filters not compatible with Kaymar rear bar
HOW DOES IT WORK?
FUEL MANAGER PRE-FILTER
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Pre-Filter + Ultimate Catch Can Kit Toyota...
$740.70
$823.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Pre-filter + Provent Ultimate Catch Can Combo Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
The Direction-Plus™ Fuel Manager Pre-Filter + ProVent Ultimate Catch Can Combo Kit – FMPV613DPC is designed and engineered in Australia to suit:
Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2011-2015
Vehicles with updated master cylinder only (with VSC)
HOW DOES IT WORK?
FUEL MANAGER PRE-FILTER
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Post-Filter + Provent Dual Kit Ford Ranger...
$666.90
$741.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Dual Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV661DPK is designed and engineered in Australia to suit:
Ford Ranger P4AT (2.2L 4cyl) 2011-2020
Ford Ranger P5AT (3.2L 5cyl) 2011-2022
Ford Everest P5AT (3.2L 5cyl) 2015-2022
Mazda BT-50 P4AT (2.2L 4cyl) 2011-2018
Mazda BT-50 P5AT (3.2L 5cyl) 2011-2021
HOW DOES IT WORK?
FUEL MANAGER POST-FILTER
Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!!
THE SOLUTION
To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system
BENEFITS OF A FUEL MANAGER POST-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
*Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,160.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,159.92
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$4,719.88
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,479.92
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
