Drawers, Exhaust, and Flares

Wolverine Flare Kit Toyota LandCruiser 300 Series - WF300MF ADR Compliant – Designed for legal wheel coverage, improved clearance, and added protection. Available Kit Options Flares Only – Includes the complete set of four external flares (front pair features the innovative 2-piece design). Full Kit – Includes four external flares, matching mudflaps, installation hardware, and everything required for complete wheel arch coverage. Transform your LandCruiser 300 Series (all models except GR) with our premium aftermarket 300 Series flares, designed to provide additional clearance for larger tyres while enhancing the rugged appearance of your vehicle. This premium 300 Series flare kit is engineered for Australian conditions and delivers improved wheel coverage, protection, and styling. Each set includes four external flares and mudflaps for complete wheel arch coverage and compliance. Whether you're looking for LC300 flares, a complete LC300 flare kit, or premium 300 Series LandCruiser flares, this kit delivers the perfect combination of functionality and appearance. Key Features 35mm Width Extension – Perfect balance of protection and aggressive styling Premium LandCruiser 300 flares engineered for Australian conditions Two Kit Options – Choose between the Flares Only kit or the Full Kit, which includes matching mudflaps and installation hardware Innovative 2-Piece Front Design – Compatible with all LandCruiser 300 Series models (except GR), with or without bull bar Contoured Seal System – Prevents mud/sand ingress and protects your vehicle's paintwork Premium Materials – High-quality UV-coated ABS plastic for superior durability Complete Wheel Arch Solution – Available as either a Flares Only kit or a Full Kit with matching mudflaps for maximum coverage. DIY Installation – Direct replacement design for straightforward installation Australian Made – Designed, tested, and manufactured for Australian conditions Technical Specifications Compatibility: All Toyota LandCruiser 300 Series models (except GR) Material: Premium ABS Plastic with UV protection Finish: Matte black, ready to install or paint Installation: Direct replacement (DIY) Package Contents (Varies by Selection) Flares Only: 4 external flares (front pair features the 2-piece front design), installation hardware, instructions. Full Kit: 4 external flares (front pair features the 2-piece front design), matching mudflaps, installation hardware, instructions. The Wolverine Difference Unlike competitor products that require cutting or modification to fit vehicles with bull bars, our innovative 2-piece front flare design adapts perfectly to your LandCruiser 300, regardless of your front-end setup. These premium LC300 flares feature a precision-engineered contoured seal that creates a cleaner look and protects your vehicle's paintwork from damage while preventing mud and debris from becoming trapped between the flare and the body. Designed as a complete 300 Series flare kit, this solution delivers compliance, durability, and a factory-quality finish. Installation Our flares are designed for straightforward DIY installation with standard tools. Comprehensive instructions are included, and installation typically takes 1-2 hours for the complete set. Frequently Asked Questions Does this flare kit fit the LandCruiser 300 GR variant? No. The Wolverine WF300MF flare kit is designed to suit all Toyota LandCruiser 300 Series models except the GR variant. If you're unsure about your vehicle's compatibility, contact our team for confirmation before ordering. Will the WF300MF work with my bull bar already installed? Yes. The innovative 2-piece front flare design is engineered to work with LandCruiser 300 vehicles fitted with or without a bull bar, eliminating the need for cutting or modification during installation. How long does installation take and can I do it myself? The WF300MF is designed for straightforward DIY installation using standard tools. Most installations take approximately 1–2 hours and comprehensive fitting instructions are included. Professional installation is available if preferred. Are these 300 Series flares legal for road use? Yes. Our ADR-compliant 300 Series flare kit is designed to provide legal wheel coverage while improving vehicle protection and appearance. Combined with the included mudflaps, these LandCruiser 300 flares help support compliance requirements when installed correctly. Please Note: This product is available in two configurations. Please ensure you select the correct option before ordering, as package contents vary depending on the selected variant.

Massively improve the storage solutions in your Suzuki Jimny with these two carpeted base decks. No need for seat removal. These decks create a great surface for securing your bags, boxes or other cargo.   Includes 2 base decks (1 left and 1 right hand side), 3 mounting brackets, installation hardware and fitting instructions. The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Suzuki Jimny. The decks are covered with a durable, UV resistant nylon pile carpet. The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration. The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow. Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. No need to remove the rear seats for installation of the base deck. Consists of:1 x Left Hand Base Deck1 x Right Hand Base Deck1 x Mounting Brackets SetFitting InstructionsHardware Kit Materials used:Black powder-coated high strength steelNylon carpeted 12mm laminated plywood Product Dimensions:795mm (31.3") L x 1295mm (51") W x 228mm (9") H Weight:10kg (22.1lbs)Load Rating:60Kg (132.3lbs)

ADR Compliant – Designed for legal wheel coverage, improved clearance, and added protection. Available Kit Options Flares Only – Includes the complete set of four external flares (front pair features the innovative 2-piece design). Full Kit – Includes four external flares, matching mudflaps, installation hardware, and everything required for complete wheel arch coverage. Transform your Landcruiser 300 Series GR with our premium aftermarket flares, designed to provide additional clearance for larger tires while enhancing the rugged appearance of your vehicle. Each set includes four external flares and mudflaps for complete wheel arch coverage and compliance. Key Features 35mm Width Extension – Perfect balance of protection and aggressive styling Innovative 2-Piece Front Design – Compatible with Landcruiser 300 Series GR model, with or without bull bar Contoured Seal System – Prevents mud/sand ingress and protects your vehicle's paintwork Premium Materials – High-quality UV-coated ABS plastic for superior durability Two Kit Options – Choose between the Flares Only kit or the Full Kit, which includes matching mudflaps for complete coverage. DIY Installation – Direct replacement design for straightforward installation Australian Made – Designed, tested, and manufactured for Australian conditions Technical Specifications Compatibility: Toyota Landcruiser 300 Series GR ONLY Material: Premium ABS Plastic with UV protection Finish: Matte black, ready to install or paint Installation: Direct replacement (DIY) Package Contents (Varies by Selection)     Flares Only: 4 external flares (front pair features 2-piece design), installation hardware, instructions. Full Kit: 4 external flares (front pair features 2-piece design), matching mudflaps, installation hardware, instructions. The Wolverine Difference Unlike competitor products that require cutting or modification to fit vehicles with bull bars, our innovative 2-piece front flare design adapts perfectly to your Landcruiser 300 GR, regardless of your front-end setup. The precision-engineered contoured seal creates a cleaner look and protects your vehicle's paintwork from damage while preventing mud and debris from becoming trapped between the flare and the body. Installation Our flares are designed for straightforward DIY installation with standard tools. Comprehensive instructions are included, and installation typically takes 1-2 hours for the complete set. Please Note: Package contents vary depending on the selected variant. Refer to the option you've chosen for the included components.

TWIN 3″ INTO SINGLE 4″ EXHAUST FOR TOYOTA 200 SERIES 4.5L LANDCRUISER: 10/2015… FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. PERFORMANCE GAIN: 16KW / 52NM Whether used for towing, touring or daily driving, the 200 Series Landcruiser is one of the most capable 4WD’s on the market, and Torqit’s 200 Series DPF Back Performance Exhaust has the strength and quality to back it up. Renowned for our Landcruiser exhausts, Torqit has put in extensive R & D to produce one of the thickest and most durable mandrel bent systems of its kind in Australia. Manufactured from 304 grade brushed stainless steel, our exhausts are fully mandrel bent and up to 2mm thick to prevent cracking when traversing rough terrain. The three-bolt, laser cut flanges are also manufactured from 304 grade stainless steel, and welded inside and out for extra strength. This 200 Series exhaust is a twin 3” system which exits through a single 4” tailpipe. The thickness of the steel and the 4” tailpipe add depth and rumble to the note, a large improvement on the factory exhaust. To further amplify and deepen the note, this 200 Series exhaust comes standard with an x-pipe. The x-pipe redirects the exhaust gases through a less congested path and balances out uneven exhaust pulses. This increases the sound output, reduces back pressure, and increases the engine efficiency and fuel economy.* As the owner of a vehicle fitted with a DPF, no doubt you are aware there are few things which damage a diesel engine quicker than excessive Exhaust Gas Temperatures (EGT’s). By improving the flow of gases, Torqit’s 200 Series Performance Exhaust has been developed to lower these EGT’s and help your vehicle breathe better and live longer. The Torqit 200 Series Performance Exhaust bolts directly onto the back of the DPF, and keeps your vehicle compliant with all warranty and insurance regulations. It is the ideal alternative to deleting your DPF, without the legal ramifications. Combine this 200 Series system with additional upgrades to completely transform your vehicles’ performance PERFORMANCE EXHAUST FEATURES Thick Stainless SteelAn exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone.  304 Grade Stainless SteelThe highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems.  Internal & External WeldsHigh quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter. Mandrel Bent SystemTorqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment.  SINGLE EXIT PERFORMANCE EXHAUST INSTALLATION Torqit’s Twin into Single Exit 200 Series Performance Exhaust is a DIY full bolt together system, and comes with detailed fitting instructions. It does not require a hoist for install, and can be fitted in approximately one hour on your driveway. It comes with a full fitment kit and requires only a basic socket set and spanners. FEATURES Brushed stainless steel tube up to 2mm thick Premium 304 grade stainless steel Fully mandrel bent system Internal and external welds Three-bolt laser cut flanges Heavy-duty wrap around brackets Stainless steel resonator/muffler Deep note without cabin drone DIY bolt together install Ten year product warranty

MSA 4x4 Ford Ranger PY Double Storage Drawer System- 41013 SUITS: Ford Ranger PY Ford Ranger PY FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

Wolverine LandCruiser 250 Prado Series Flare & Mudflap Kit - WF250PRADO ADR Compliant – Designed for legal wheel coverage, improved clearance, and added protection. TOYOTA LANDCRUISER PRADO 250 – Complete Premium 70mm Flare & Mudflap Kit Upgrade your 2024+ Prado 250 with our Complete Premium 70mm Flare & Mudflap Kit – engineered for aggressive styling, added tyre clearance, and tough 4WD aesthetics. This premium Prado 250 flare kit is designed specifically for the latest Toyota platform and includes everything required for a complete installation. These Prado 250 flares deliver aggressive styling, improved wheel coverage, and enhanced off-road capability. Unlike flare-only kits, ours includes precision-fit mudflaps to support compliance requirements from the get-go. Proudly designed, engineered, tested, and manufactured in Australia, this complete system is built for harsh Aussie conditions. Constructed from durable ABS plastic with a UV-stabilised coating, our flares and mudflaps withstand sun exposure and off-road abuse without fading or cracking. The system allows for fitment of up to 35" tyres with correct offset wheels – perfect for serious touring, off-road builds, and anyone chasing additional clearance with a compliance-ready solution. Whether you're searching for Prado 250 fender flares, premium 250 Prado flares, a complete LC250 flare kit, or a road legal LC250 flare kit, this system delivers both performance and practicality. True DIY-friendly: no cutting, no hassle. Every kit includes all required hardware, detailed instructions, and components – ready for easy installation whether you’re in the garage or shed.   🎯 LIMITED TIME OFFER: FREE Professional Installation for First 50 Customers* (Valued at $300) – ideal if you want peace of mind with a pro install. *In-store only.   Key Features: Suits 2024+ TOYOTA LANDCRUISER PRADO 250 SERIES Complete kit – flares and mudflaps included Bold 70mm wide-body stance Engineered for up to 35" tyres with correct wheel offsets Mudflaps included to help meet compliance requirements Made in Australia from UV-stabilised ABS plastic Designed for strength, flexibility, and long-term durability All fixings and step-by-step install guide included Perfect for larger tyres, added wheel protection, and improved road presence No need to purchase additional mudflaps separately Built by Aussies, for Aussies – delivers clearance, impact, and compliance support in one solution Complete LC250 flare kit with matching mudflaps included Designed as a LandCruiser 250 compliance kit for wider wheel and tyre setups Premium Toyota LandCruiser 250 flares Australia engineered for Australian conditions Premium LandCruiser 250 flares with mudflaps included for a complete solution Why Choose Our Complete Kit vs Competitors? What You Get Competitors Our Complete Kit Flares ✅ $400–800 ✅ Included Mudflaps ❌ Extra $300+ ✅ Included Professional Installation ❌ Extra $300–500 ✅ FREE (First 50) 35" Tyre Ready ⚠️ Maybe ✅ Engineered Quality ❌ Chinese Import ✅ Australian Made Compliance Ready ❌ Incomplete Kit ✅ Complete Solution Total Investment $1,100–1,900+ $1,999 Complete   With others, you’re looking at $400–800 for flares, another $300+ for mudflaps, and $300–500 for installation – totalling up to $1,900+ for an incomplete kit. Ours? $1,999 complete, Australian-made, and includes FREE installation for the first 50 customers. Delivery Information: We ship Australia-wide via trusted couriers for a flat rate of $120. Orders are packed and dispatched same-day from our Sydney facility. Whether you're metro or regional, expect fast, reliable shipping so you can kick off your Prado upgrade without delay. Frequently Asked Questions Is the Wolverine LC250 flare kit road legal in Australia? Yes. The Wolverine flare kit is ADR compliant and designed to provide legal wheel coverage while improving vehicle protection and appearance. Always ensure the vehicle remains compliant with local state regulations. Does this kit include mudflaps and all mounting hardware? Yes. The kit includes four external flares, mudflaps, installation hardware, and detailed fitting instructions for a complete installation. Can I fit this flare kit myself or do I need professional installation? Yes. The flare kit features a direct replacement design and can be installed by most DIY enthusiasts using basic tools. Professional fitting is optional for those who prefer expert installation. Are these Prado 250 flares legal for road use? Yes. Our Prado 250 flare kit legal solution is ADR compliant and designed to provide legal wheel coverage. Combined with the included mudflaps, these LandCruiser 250 flares with mudflaps help support compliance requirements while enhancing the appearance and functionality of your vehicle.

Suits Toyota Landcruiser 200 Series GXL/VX/Sahara Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA LANDCRUISER 76 SERIES LEFT STORAGE DRAWER SYSTEM-E930A-LC76-LEFT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA PATROL Y62 LEFT STORAGE DRAWER SYSTEM-41008 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA 4X4 LANDCRUISER 100 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC100-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA EVEREST LEFT STORAGE DRAWER SYSTEM-E930-EVERES-LEFT-COM SUITS Ford Everest 7 Seat Model, No removable wing/face panels Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 LANDCRUISER 200 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC200-COM Designed from the ground up, the way a quality 4WD storage system should be. SUITS Toyota Landcruiser 200 Series GXL/VX/Sahara Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA 4X4 PRADO 150 SERIES DOUBLE STORAGE DRAWER SYSTEM-E930-PRA150-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 Double Storage Drawer System for Ford Ranger PX & Mazda BT-50 Upgrade your vehicle storage and organisation with the MSA 4X4 Double Storage Drawer System, purpose-built for the Ford Ranger PX Series and Mazda BT-50. Designed for touring, trade, and off-road applications, this premium storage system provides secure, organised, and easily accessible storage while maximising the usable space in your vehicle tub. Featuring MSA 4X4's patented drawer technology, both drawers extend 100% beyond the frame, providing complete access to your gear. Fully sealed stainless steel bearings and nylon rollers ensure smooth, quiet operation under heavy loads, while reducing overall system weight compared to traditional drawer designs. Constructed from lightweight yet exceptionally strong aluminium with corrosion-resistant components throughout, this storage system is built to handle years of demanding use in harsh Australian conditions. Key Features Designed specifically for Ford Ranger PX, PX2, PX3 and Mazda BT-50 UP, UR models. 100% drawer extension for complete access to stored equipment. Patented Stay-Open Block keeps drawers securely open on slopes up to 30 degrees. Fully sealed stainless steel bearings with nylon rollers. Integrated LED light strips illuminate drawer contents when fully extended. Heavy-duty secure locking system. Dust-resistant seals help protect stored equipment. Removable wing and face panels provide access to additional storage areas. Premium Construction Lightweight aluminium drawer modules. Anodised aluminium components for maximum durability. Rust-resistant stainless steel fasteners throughout. Smooth and quiet drawer operation under load. Designed for long-term off-road and touring use. Safety & Compliance Includes cargo barrier mounting points. Includes child restraint anchor points. Designed to improve cargo security during travel. Built to MSA 4X4's high safety and quality standards. What's Included Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire Complete Wing Kits Cargo Barrier Mounting Points Child Restraint Points Compatible Accessories Drawer Stacking Kit (40001) Drawer Divider (EDDIV) Left Power Panel (EPP-Left) Left Pre-Cut Panel (SP0506) Right Power Panel (EPP-Right) Right Pre-Cut Panel (SP0507) Large Battery Box (40018) Slimline Battery Box (40019) Explorer Storage Bag Bundle (20013) Explorer Storage Bag Large (20012) Explorer Storage Bag Medium (20011) Explorer Storage Bag Small (20010) Deluxe Coffee Kit Black (45042) Deluxe Coffee Kit Cream (45043) Vehicle Compatibility FORD RANGER PX (2012-2022) FORD RANGER PX2 (2015-2022) FORD RANGER PX3 (2018-2022) MAZDA BT-50 UP (2011-2020) MAZDA BT-50 UR (2018-2020) Dimensions External Dimensions Length: 1365mm (including handle lock) Height: 275mm Width per Drawer: 530mm (excluding wings) Internal Drawer Dimensions Internal Length: 1250mm Internal Width: 453mm Drawer Height: 211mm Usable Height: 215mm Specifications Product Code: E1350-BT50-COM Product Type: Double Storage Drawer System Weight: 112.4kg Important Information Designed to mount directly to the vehicle tub body. Not compatible with factory or aftermarket tub liners. Tub liners must be removed prior to installation. Warranty Covered by the renowned MSA 4X4 Lifetime Guarantee for long-term confidence and reliability.

TORQIT Twin 3" Into Single 4" Turbo Back Stainless Steel Performance Exhaust for Toyota LandCruiser 200 Series 4.5L FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. Upgrade your Toyota LandCruiser 200 Series with TORQIT's Twin 3" Into Single 4" Turbo Back Stainless Steel Performance Exhaust. Designed specifically for the 4.5L V8 Turbo Diesel, this premium exhaust system delivers substantial gains in power and torque while producing a deep V8 exhaust note with refined sound control thanks to the integrated muffler design. Manufactured in Australia from premium 304-grade brushed stainless steel up to 2mm thick, this heavy-duty exhaust system is engineered for demanding towing, touring and off-road conditions. The twin 3-inch front section merges into a large 4-inch rear section, maximising exhaust flow while maintaining excellent drivability and long-term durability. Performance Gains Power Increase: Up to 26kW Torque Increase: Up to 94Nm Reduced Exhaust Gas Temperatures (EGTs) Improved Turbo Efficiency Enhanced Towing and Touring Performance Deep Exhaust Note with Controlled Cabin Noise Key Features Twin 3-inch into single 4-inch turbo back exhaust system Integrated stainless steel muffler Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel-bent design TIG welded construction Internal and external welds for maximum strength Three-bolt laser-cut flanges Heavy-duty wrap-around mounting brackets Titanium-coated dump pipes to assist heat dispersion High-flow diesel catalytic converter Double-braided stainless steel flex bellows Deep exhaust note with minimal cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless-steel diesel exhaust systems Built for Australian Conditions Designed and tested in some of Australia's toughest environments, this exhaust system combines thick-wall stainless steel construction, precision TIG welding and mandrel-bent tubing to maximise durability and performance. The twin 3-inch pipes transition into a large 4-inch outlet, providing exceptional exhaust flow while maintaining excellent towing and touring manners. Titanium-coated dump pipes help disperse heat more efficiently, reducing engine bay temperatures and supporting long-term reliability. Combined with high-flow catalytic converter technology and premium flex bellows, this system is engineered for serious touring, towing and off-road use. Vehicle Compatibility Toyota LandCruiser 200 Series 4.5L V8 Turbo Diesel 11/2007 – 09/2015 SKU: HS8133SS / DD Installation This exhaust system includes a complete fitting kit and features a DIY bolt-together design. Installation can typically be completed in approximately two hours using standard workshop tools without requiring a hoist. Additional Compatibility Information This exhaust is designed to suit selected long-range fuel tanks including LRA, Long Ranger 177L and Brown Davis Long Range fuel tanks. If your vehicle is fitted with additional aftermarket accessories or fuel tanks not listed, please contact our team prior to ordering to confirm compatibility. Important Information Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and coating are completed to order and may require additional processing time before dispatch.

Suits Nissan Patrol Y62 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

Make storing and organizing gear and valuables a no-brainer. This lockable drawer with fitted decks and faceplates have been designed specifically for the Toyota Land Cruiser 79 DC. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle.Engineered tough for both on and off-road travel. This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions. 180kg / 397lb drawer load carrying capacity. Hold open feature: drawer "locks" open while parked on uneven surfaces. High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base. Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear. The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides. A fridge (footprint of 750mm x 425mm or smaller) can be installed on the left hand side of the drawer for access through a gullwing style window. The right rear deck and back right side deck each have a cut out (215mm in diameter) to fit and secure a gas/propane bottle or similar shaped object. The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc. To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle. The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicle’s interior contours. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. This drawer kit can be easily installed in minutes by securing the drawers via 3 channels and supplied hardware. Drilling is required to fit the 3 securing channels into the Toyota Land Cruiser 79 load bed.   All Front Runner Storage Systems are backed by a 2 year warranty.*Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner.   Consists of:1 x Front Runner Drawer unit (SSDR012)1 x Toyota Land Cruiser 79 DC Drawer Deck Completion Set (SSDS107)1 x Wing Set (SSWS004)1 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory ChannelsInstallation HardwareFitting InstructionsMaterials used:Aluminum - Accessory ChannelsBlack powder coated steel - Drawer Bins, Frame & Mounting ChannelsCarpeted & Laminated plywood - Top Deck & Deck SetsProduct Dimensions:Overall Closed Dimensions:1510mm (59.5") L x 1574mm (62") W x 335mm (13.2") HDrawer Internal Dimensions:1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") HWeight:80.5kg (177.5lbs)Load Rating:180kg (397lbs)

Includes 2 base decks (1 left and 1 right hand side), 3 mounting brackets, installation hardware and fitting instructions. The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Suzuki Jimny. The decks are covered with a durable, UV resistant nylon pile carpet. The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration. The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow, SUV Drawer / Small. Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. Please Note: The rear seats need to be removed to install the base deck. Features Consists of: 2 x Base Decks (1 Left hand & 1 Right hand side) 3 x Mounting brackets Installation Hardware Fitting Instructions Materials used: Black powder coated steel 12mm Laminated Plywood Nylon Carpet Product Dimensions: 830mm (32.7") L x 920mm (36.2") W x 110mm (4.3") H Weight: 7.9kg (17.4lbs) Load Rating: 250kg (551.2)

Storing, organizing, and moving gear in the Toyota Prado/Lexus GX 470 just got easier. This Cub Pack based lockable drawer system provides a comprehensive and practical storage solution for easily transporting stored items between a vehicle and the campsite, garage, store, etc. Designed specifically to fit the contours of the Toyota Prado/Lexus GX470. Engineered tough for both on and off-road conditions. This removable box drawer kit includes 1 drawer slides, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.These stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. 113kg / 250 lb per drawer load carrying capacity. Hold open feature: drawers\ “lock” open while parked on uneven surfaces. High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear. The flat deck incorporates three cargo attachment channels and 6 Black Tie Down Rings / Eye Nuts. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminium boxes and other storage containers to the top deck using Stratchits. The deck above the drawer can also be used to mount Front Runner Cargo/Fridge Slides. The left and right-side Faceplates have 4, pre-cut, knock-outs each for adding electrical panel socket inserts (sold separately). The side decks are easily removable creating storage pockets between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, snorkels, masks, fins, kindling, barbeque skewers, etc. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as the Front Runner Slimline Rack and other Front Runner products. This Front Runner Removable Box Drawer Kit can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy. This storage system is designed for interior use.   All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase. Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys1 x Deck Completion Set3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top and Side DecksProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 1425mm (56.1") W x 338mm (13.3") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:72.1kgLoad Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.