FRONT RUNNER 6 Cub Pack Drawer / Wide Incl. Boxes...
$2,450.70
$2,723.00
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.This removable box drawer includes 1 drawer slide, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes. These stackable and durable SBOX001 storage containers are made from black, high strength plastic and have integrated grips for easy carrying. 113kg / 250 lb per drawer load carrying capacity.
Hold open feature: drawer “locks” open while parked on uneven surfaces. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear. The flat deck incorporates three cargo attachment channels and 6 RRAC012.
Customize your own storage configurations. Stack and secure luggage, SBOX031s, SBOX001s, aluminum boxes and other storage containers to the top deck using STRA034 or other straps. The deck above the drawer can also be used to mount Front Runner Cargo / Fridge Slides. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Removable Box Drawer can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy. This storage system is designed for interior use. All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: These ''universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top DeckProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 950mm (37.4") W x 285mm (11.2") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:64.3kg (141.8lbs)Load Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
FRONT RUNNER 6 Wolf Pack Pro Drawer / Wide Incl....
$2,897.10
$3,219.00
Neatly organize and easily access all your gear with this innovative drawer-slide system. This kit was specifically designed for the Wolf Pack Pro (the ultimate plastic storage box) and includes six Wolf Pack Pro load bins so you can store and transport all your gear.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Pack ProsInstallation HardwareFitting Instruction
Materials used:Aluminum - Accessory Channels & Sub FrameBlack powder coated steel - FrameCarpet & Laminated plywood - Top Deck
Product Dimensions:Overall Dimensions:1252mm (49.3") L x 1083mm (42.6") W x 310mm (12.2") H
Drawer Inner Dimensions:1197mm (47.1") L x 1031mm (40.6") W x 230mm (9.1") H
Drawer Unit Open Dimensions:2163mm (85.2") L x 1083mm (42.6") W x 310mm (12.2") H
Weight:67Kg (147.7lbs)
Load Rating:113Kg (250lbs)
Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
FATZ FABRICATION Vdj79 Exhaust, Dpf Back 4" Suit Jmacx Converted...
$3,260.00
Jmacx Converted 79 Series 4” Dpf Back Exhaust.
If you are looking to improve the sound and appearance of your Jmacx converted 79 Series, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system. There is no muffler option available for this system at this time due to space constraint. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your 79. Available in single exit only. Compatible with Jmacx coil converted vehicles only.
Rendered images are for product representation only. Actual product may differ in surface finish and general appearance.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back Pre Dpf (Dual Fuel...
$2,860.00
VDJ79 Single Cab, DUEL tank Side Exit 4″ Exhaust.
If you are looking looking to get noticed with the sound an look of your exhaust on you VDJ79, look no further than our 4″ side Exit System. Flaring to 4″ directly at the turbo dump flange, you will not find the limit in flow of this system. Built entirely in 304 Grade Stainless steel components, Including a CAT in all cases, 8mm flange plates and 3mm folded Stainless brackets, tig welded in house for a premium finish standard. All tube is finished to a 320 grain polished finish. This system is built to suit Single cab VDJ79 vehicles with factory dual fuel tanks. This ensures the mounting bracketry is present on the outside of the chassis rail. This system is available in “strait through” only, and no muffler option is available, due to space available where routed.
Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj76 Exhaust, Turbo Back For Dpf Models (Single...
$4,100.00
VDJ76 Series Turbo Back 4″ Exhaust
Our 76 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. Purchase our 76 series landcruiser Turbo Back 4″ Exhaust and experience the difference.
Rendered images are for product representation only. Actual product may differ in appearance or surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj76 Exhaust, Dpf Back (Single Fuel Tank). With...
$3,200.00
If you are looking to improve the sound and appearance of your 76 Series, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 76 series sound great. With the DPF in-line, there is little need for a muffler in this system, though this can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded. All brackets are 3mm Stainless. This system will last as long as your 76 series. Compatible with Airbags in the rear. Not compatible with coil converted vehicles.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Single Cab Exhaust, Dpf Back (Single Fuel...
$1,760.00
VDJ79 series DPF Side exit 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exit exhaust is a great option. Flaring to 4” right at the side exit of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Dpf Back 4" Suit Jmacx Converted...
$3,360.00
Jmacx Converted 79 Series 4” Dpf Back Exhaust.
If you are looking to improve the sound and appearance of your Jmacx converted 79 Series, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system. There is no muffler option available for this system at this time due to space constraint. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your 79. Available in single exit only. Compatible with Jmacx coil converted vehicles only.
Rendered images are for product representation only. Actual product may differ in surface finish and general appearance.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back Pre Dpf (Dual Fuel...
$4,160.00
VDJ 79 Series, Pre-DPF Models (Dual Fuel Tanks)Turbo Back 4″ Exhaust.
Our Toyota 79 Series Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single Exit only. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. For vehicles with factory dual fuel tanks only. Purchase our Toyota 79 series VDJ Pre-DPF Models (Dual Fuel Tanks) Turbo Back 4″ Exhaust and experience the difference.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Dpf Back (Single Fuel Tank). Without...
$3,960.00
VDJ79 series DPF Back 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF Back 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Turbo Back For Dpf Models (Single Fuel...
$4,360.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Dpf Back (Single Fuel Tank). With...
$3,060.00
VDJ79 series DPF Back 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF Back 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Dpf Back (Single Fuel Tank). With...
$4,060.00
VDJ79 series DPF Back 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF Back 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Single Cab Exhaust, Dpf Back (Single Fuel...
$1,860.00
VDJ79 series DPF Side exit 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exit exhaust is a great option. Flaring to 4” right at the side exit of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj76 Exhaust, Turbo Back For Dpf Models (Single...
$4,200.00
VDJ76 Series Turbo Back 4″ Exhaust
Our 76 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. Purchase our 76 series landcruiser Turbo Back 4″ Exhaust and experience the difference.
Rendered images are for product representation only. Actual product may differ in appearance or surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back Pre Dpf (Dual Fuel...
$5,160.00
VDJ 79 Series, Pre-DPF Models (Dual Fuel Tanks)Turbo Back 4″ Exhaust.
Our Toyota 79 Series Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single Exit only. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. For vehicles with factory dual fuel tanks only. Purchase our Toyota 79 series VDJ Pre-DPF Models (Dual Fuel Tanks) Turbo Back 4″ Exhaust and experience the difference.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back Pre Dpf (Dual Fuel...
$5,060.00
VDJ 79 Series, Pre-DPF Models (Dual Fuel Tanks)Turbo Back 4″ Exhaust.
Our Toyota 79 Series Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single Exit only. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. For vehicles with factory dual fuel tanks only. Purchase our Toyota 79 series VDJ Pre-DPF Models (Dual Fuel Tanks) Turbo Back 4″ Exhaust and experience the difference.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Dual Cab Exhaust, Dpf Back (Single Fuel...
$1,760.00
VDJ79 series DPF Side exit 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exit exhaust is a great option. Flaring to 4” right at the side exit of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back Pre Dpf (Dual Fuel...
$4,060.00
VDJ 79 Series, Pre-DPF Models (Dual Fuel Tanks)Turbo Back 4″ Exhaust.
Our Toyota 79 Series Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single Exit only. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. For vehicles with factory dual fuel tanks only. Purchase our Toyota 79 series VDJ Pre-DPF Models (Dual Fuel Tanks) Turbo Back 4″ Exhaust and experience the difference.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Dpf Back (Single Fuel Tank). Without...
$2,960.00
VDJ79 series DPF Back 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF Back 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Turbo Back For Dpf Models (Single Fuel...
$4,260.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Dual Cab Exhaust, Dpf Back. Side Exit...
$1,860.00
VDJ79 series DPF Side 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exhaust is a great option. Flaring to 4” right at the side of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Single Cab Exhaust, Turbo Back For Dpf...
$2,960.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Single Cab Exhaust, Turbo Back For Dpf...
$2,860.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj76 Exhaust, Dpf Back (Single Fuel Tank). Without...
$3,100.00
If you are looking to improve the sound and appearance of your 76 Series, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 76 series sound great. With the DPF in-line, there is little need for a muffler in this system, though this can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded. All brackets are 3mm Stainless. This system will last as long as your 76 series. Compatible with Airbags in the rear. Not compatible with coil converted vehicles.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back For Dpf Models (Single...
$4,200.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back For Dpf Models (Single...
$4,100.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back For Dpf Models (Single...
$5,100.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Dual Cab Exhaust, Turbo Back For Dpf...
$2,960.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Dual Cab Exhaust, Turbo Back For Dpf...
$2,860.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj79 Exhaust, Turbo Back For Dpf Models (Single...
$5,200.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
MSA 4X4 Triton Mq Left Storage Drawer System - E1350-TRITMQ-LE-COM
$1,437.30
$1,597.00
MSA TRITON MQ LEFT STORAGE DRAWER SYSTEM-E1350-TRITMQ-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 E930A Generic Right Storage Drawer System - E930A-RIGHT-COM
$1,239.30
$1,377.00
MSA E930A GENERIC RIGHT STORAGE DRAWER SYSTEM -E930A-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 433mm
MSA 4X4 E1030 Generic Double Storage Drawer System - E1030-COM
$2,529.00
$2,810.01
LandCruiser 300 Series Double Storage Drawer
PRODUCT CODE: 41010
VEHICLE DATE: 07/2021-CurrentPRODUCT TYPE: Double Storage Drawer System
SUITS: Toyota Landcruiser 300 Series GXL/VX/SaharaToyota Landcruiser
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
MSA 4X4 E830 Generic Left Storage Drawer System - E830-LEFT-COM
$1,253.70
$1,393.00
MSA E830 GENERIC LEFT STORAGE DRAWER SYSTEM-E830-LEFT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 830mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 715mm
Intenral drawer width = 525mm
MSA 4X4 Fortuner Left Storage Drawer System-E930 - E930-FORTUN-LE-COM
$1,264.50
$1,405.00
MSA FORTUNER LEFT STORAGE DRAWER SYSTEM-E930-FORTUN-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
XTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA 4X4 E700 Generic Double Storage Drawer System - E700-COM
$2,507.40
$2,786.00
MSA 4X4 E700 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E700-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 700mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 590mm
Internal drawer width = 525mm
MSA 4X4 Patrol Y62 Double Storage Drawer System - 41007
$3,175.20
$3,528.00
MSA 4X4 PATROL Y62 DOUBLE STORAGE DRAWER SYSTEM-41007
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1110mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height
215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
MSA 4X4 D-Max & Colorado Left Storage Drawer System -...
$1,437.30
$1,597.00
MSA D-MAX & COLORADO LEFT STORAGE DRAWER SYSTEM-E1350-COLORG-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Triton Mq Double Storage Drawer System-E1350-Tritmq - E1350-TRITMQ-COM
$2,876.40
$3,196.00
MSA 4X4 TRITON MQ DOUBLE STORAGE DRAWER SYSTEM-E1350-TRITMQ-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Navara D23 Right Storage Drawer System - 41018
$1,437.30
$1,597.00
MSA NAVARA D23 RIGHT STORAGE DRAWER SYSTEM-41018
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Ford Ranger Right Storage Drawer System - 41015
$1,444.51
$1,605.01
MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Wing and Fit Kit (includes floor extension)
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Triton Mq Right Storage Drawer System-E1350-Tritmq-Ri - E1350-TRITMQ-RI-COM
$1,437.30
$1,597.00
MSA TRITON MQ RIGHT STORAGE DRAWER SYSTEM-E1350-TRITMQ-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Fortuner Double Storage Drawer System-E930-Fortun - E930-FORTUN-COM
$2,529.00
$2,810.01
MSA 4X4 FORTUNER DOUBLE STORAGE DRAWER SYSTEM-E930-FORTUN-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA 4X4 Navara Np300 Right Storage Drawer System - E1350-NAV300-RI-COM
$1,437.30
$1,597.00
MSA NAVARA NP300 RIGHT STORAGE DRAWER SYSTEM-E1350-NAV300-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 E830 Generic Right Storage Drawer System - E830-RIGHT-COM
$1,253.70
$1,393.00
MSA E830 GENERIC RIGHT STORAGE DRAWER SYSTEM -E830-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 830mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 715mm
Internal drawer width = 525mm
MSA 4X4 Ford Ranger Left Storage Drawer System - 41014
$1,444.51
$1,605.01
MSA FORD RANGER PY 07/2022-CURRENT COMPLETE LHS DRAWER KIT
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Wing and Fit Kit (includes floor extension)
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 E1030 Generic Right Storage Drawer System - E1030-RIGHT-COM
$1,264.50
$1,405.00
MSA E1030 GENERIC RIGHT STORAGE DRAWER SYSTEM -E1030-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Amarok Ad Blue Left Storage Drawer System -...
$1,437.30
$1,597.00
MSA AMAROK AD BLUE LEFT STORAGE DRAWER SYSTEM -E1350-VWROKAB-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Hilux 8Th Gen Right Storage Drawer System -...
$1,437.30
$1,597.00
MSA HILUX 8TH GEN RIGHT STORAGE DRAWER SYSTEM-E1350-HILUX8-RI-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
