FRONT RUNNER Toyota Land Cruiser 76 Load Bar Kit /...
$495.00
$550.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 155mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 155mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTL035 - Toyota Land Cruiser 76 Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 120mm (5")Length 1555mm (61")Height 175mm (7")
Shipping Weight:
Weight 8.7kg (19.2lbs)
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit For Toyota Hilux...
$499.50
$555.00
The TransChill Arctic Black Transmission cooler kit TCB612DPK fits Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2004-2015 & 1GR (4.0L 6cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
FRONT RUNNER Land Rover Defender Puma (2007-2016) Gullwing Box- -...
$499.50
$555.00
The Front Runner Gullwing Box is used in conjunction with the Front Runner Gullwing Window-Glass or Front Runner Gullwing Window-Aluminium. This creates extra convenient storage space for your Land Rover Defender Puma. Front Runner Gullwing Box Shelves can be used to create divisions in the box for storage. *Front Runner Gullwing Box Shelves, sold seperately.
Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Board1x Bottom PanelMaterials used:Black powder coated steelBack Board: Stained PlywoodProduct dimensions:860mm (33.9") W x 310mm (12.2") L x 654mm (25.8") H (Box)860mm (33.9") W x 310mm (12.2") L x 746mm (29.4") H (Overall incl. Brackets)Weight:13.1kg (28.9lbs)
FRONT RUNNER Toyota Land Cruiser 78 3-Door Wagon Load Bar...
$501.30
$557.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTL038 - Toyota Land Cruiser 78 3-Door Wagon Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRAC044 - SLAT TO LOAD BAR CONVERSION END CAP KIT - by Front Runner
2 x RRSS1425 - 1425mm Slat - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1545mm (61")
Height 175mm (7")
Shipping Weight:
Weight 8.3kg (18.4lbs)
FRONT RUNNER Mahindra Scorpio Load Bar Kit / Gutter Mount...
$502.20
$558.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMS003 - Mahindra Scorpio Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1545mm (61")
Height 175mm (7")
Shipping Weight:
Weight 8.9kg (19.7lbs)
FRONT RUNNER Load Bar Kit Gutter Mount Fits Toyota Quantum...
$502.20
$558.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTQ004 - Toyota Quantum (2004-2018) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 119mm (5")
Length 1551mm (61")
Height 178mm (7")
Shipping Weight:
Weight 8.9kg (19.7lbs)
DIRECTION-PLUS Preline Plus Pre-Filter Kits Toyota Prado 120 - PL660DPK
$503.10
$559.00
Direction-Plus™ PreLine-Plus Pre-Filter Kit PL660DPK fits Toyota Prado 120 models. It is an innovative pre-filter system for diesel fuel systems which ensures 100% of water (based on 300um droplet size) and 98% particle pre-separation (based on 30micron particles).
Designed specifically to cope with extreme weather conditions and poor fuel quality, it is the perfect choice for drivers in Australia.
100% WATER SEPARATION
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced.
WATER ALERT SYSTEM INCLUDED
The PreLine-Plus Pre-Filter kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
FRONT RUNNER Mercedes-Benz Gelandewagen (1979-2017) Load Bar Kit / Gutter...
$504.00
$560.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 170mm Gutter Mount legs, 2 1475mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGW007 - Mercedes Gelandewagen (1979-2017) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1580mm (62")
Height 175mm (7")
Shipping Weight:
Weight 8.9kg (19.6lbs)
FRONT RUNNER Toyota Hilux Revo Dc (2016-Current) Load Bar Kit...
$504.90
$561.00
Transport gear over the roof of your 2016-Current Toyota Hilux Revo DC with this low-profile set of Load Bars. This kit allows the use of many Front Runner rack accessories, without the need to install a full roof rack.
Includes wind deflector, four (4) mounting feet and two (2) 1165mm Load Bars that fit into the supplied tracks
Load Bars are mounted via mounting feet that bolt directly onto the supplied tracks
Uses the same strong, corrosion-free aluminum slats found in Front Runner racks
Sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats
Made from steel and durable, weather-resistant black powder coated aluminum
Includes all hardware, components and installation guide needed to fit Load Bars on a vehicle
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTH022 - Toyota Hilux Revo DC (2016-Current) Load Bar Kit / Track & Feet - by Front RunnerConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK013 - Load Bar Pair 1165mm(W)1x TRTH006 - Toyota Revo DC (2016-Curr) Tracks/1300mm(L)1x WDLB001 - Load Bar Wind Deflector / 10mmMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.44kg (18.61lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 115mm (5")Length: 1320mm (52")Height: 255mm (10")Shipping Weight:Weight: 7.14kg (16lbs)
FRONT RUNNER 10In Osram Led Light Round Mx260-Cb / Combo...
$507.60
$564.00
Driving in the dark? The MX260-CB is sure to light the way. This powerful LED offers the driver impressive near and far field illumination.
A high-performance LED driving light reaches a distance of 350m with a color temperature of 6000 Kelvin producing daylight lighting conditions.
Polycarbonate lens, durable to withstand off-road conditions.Full LED high beam polarity protection automatically breaks the circuit in the event of over-voltage, which ensures a long lifespan.
Equipped with an integrated driver and thermal management system, eliminating the risk of overheating.12V/24V compatibility for diverse requirements and vehicles from off-road to recreational and agricultural.
Special regulations and legislation within each country should be taken into consideration before use.
The MX260-CB must be installed in pairs for 12/24V vehicles.Secures to your Roof Rack with Osram LED Light MX240-CB/ MX260-CB/ MX180-CB/ MX250-CB Mounting Bolt Kit.
Optional LED Light Bar Wire Harness AX 2LS or LED Light Bar Wire Harness AX 1LS are available and sold separately.
Consists of:1 x Round LED Light1 x Mounting KitInstallation HardwareFitting Instructions
Product Dimensions:Light:261mm (10.3") L x 150mm (5.9") W x 229mm (9") H
Light with supplied bracket:261mm (10.3") L x 150mm (5.9") W x 251mm (9.9") H
Weight:4.4Kg (9.7lbs)
Special Notes:SKU: LEDDL112-CBLumens: 350012/24VColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 years
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Load Bed Load Bar...
$507.60
$564.00
If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution.
This kit is designed to work with the existing Jeep Gladiator JT factory bed rails and comes with a pair of 1425mm wide Front Runner Load Bars, 2 pairs of Front Runner Tall Load Bed Legs, and all the necessary hardware required to mount to the factory bed rails.
The Front Runner Load Bar Kit features 22mm thick HD aluminum extrusions (slats) that are used in the Slimline II Roof Rack, which means that these load bars can be used as slats in a similar width Slimline II Roof Rack.
Additionally, the sliding nut t-slots on the slats allow for unlimited and ultra-secure mounting positions, and accessories and equipment can be quickly removed as well.
Features
KRJG003 - Jeep Gladiator JT (2019-Current) Load Bed Load Bar Kit
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LBSK016 - Roof Load Bar Pair 1425mm(W)1x RRAC901 - Load Bed Nut Kit- Toyota Tacoma 2004+/Tundra 2007+
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.57kg (16.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 200mm (8"); Length: 1530mm (60"); Height: 130mm (5")
Shipping Weight:
Weight: 8kg (18lbs)
FRONT RUNNER Toyota Tacoma (2005-Current) Load Bed Load Bars Kit...
$507.60
$564.00
This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005+
This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005+
If you don’t currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This Front Runner Load Bar Kit works with the existing Tacoma factory bed rails.This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005 +DID YOU KNOW? These load bars can be used as slats in a similar width Slimline II Roof Rack. When you buy Front Runner Load Bars you are one step closer to owning a Front Runner Slimline II Roof Rack!The Front Runner Load Bar Kit is ideal for mounting accessories to your vehicle when a strong, lightweight, low profile, smaller footprint is preferred.The Front Runner Load Bar Kits utilize the same 22mm thick HD aluminium extrusions (slats) used in the Slimline II Roof Rack.The sliding nut t-slots on the slats allow unlimited, ultra secure mounting positions as well as quick removal of accessories and equipment.Accessories can be mounted to t-slots on the top and bottom of the Load Bars.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTT901T - Toyota Tacoma (2005-Current) Load Bed Load Bars Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 7kg (15lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 130mm (5")Length 1270mm (50")Height 240mm (9")
Shipping Weight:
Weight 7.9kg (17.4lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 2772Mm (L)...
$509.40
$566.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2772mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS014 - Expedition Rail Kit - Sides - for 2772mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:2772mm (109.1") L x 1165mm (45.9") W x 63mm (2.5") H
Weight:6.74 kg (14.9 lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 2772Mm (L)...
$511.20
$568.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2772mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS014 - Expedition Rail Kit - Sides - for 2772mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:2772mm (109.1") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:6.87 kg (15.2 lbs)
DIRECTION-PLUS Preline-Plus Pre-Filter Kit Land Cruiser 300 Series () -...
$512.10
$569.00
Direction-Plus™ PreLine-Plus Pre-Filter Kit PL635DPK is an innovative pre-filter system for diesel fuel which is designed and engineered in Australia to suit: Toyota Landcruiser 300 Series models.
This kit fits:
Toyota Land Cruiser 300 Series (V6 Diesel F33A-FTV) 2022 – On
Please note: Fuel Filters not compatible with Kaymar rear bar
PROTECT YOUR ENGINE
PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation.
WATER SEPARATION EFFICIENCY
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced.
WATER ALERT SYSTEM
The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT:
Remote multi-stage water alert system (visual and audible)
100% water separation efficiency (based on 150μm droplet size)
98% particle separation (based on 30 micron particles)
Reliable protection from corrosion and abrasion
No need to visually check for water – included alarm
Simple spin on style filter
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fuel Manager Post-Filter Kit Volkswagen Amarok () - PF603DPK
$514.80
$572.00
Direction Plus™ Fuel Manager Post-Filter Kit PF603DPK is designed and engineered in Australia to suit Volkswagen Amarok models, protecting the engine against costly injector failure.
This kit fits:
Volkswagen Amarok CDBA (2.0L 4cyl) 2012-2019
Single Battery Only
Only one Kit can be fitted, either Fuel Manager or ProVent Catch Can
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
MSA Ford Everest Ambiente / Trend/ Titanium 2Nd Row 60/40...
$516.60
$574.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: 2nd Row
MSA Colorado 7 Rg7 / Lt / Ltz 12/13 To...
$516.60
$574.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Rear
MSA Nissan Patrol Wagon Y62 Ti-L Front Twin Buckets Seat...
$516.60
$574.00
Front Twin Buckets (AIRBAG SEATS) D&P Electrics, DVD in Headrests + Console Cover + Integrated Lumbar Support
MSA Nissan Patrol Wagon Y62 Ti Y62 Ti-L Second Row...
$516.60
$574.00
Second Row 60/40 Split, Armrest & 3 Headrests
MSA Nissan Patrol Wagon Y62 Ti L St L Front...
$516.60
$574.00
Front Twin Buckets Pair (AIRBAG SEATS) D&P Electrics, No DVD Headrest + Console Cover + Integrated Lumbar Support
MSA Nissan Patrol Wagon Gu (Y61) Series 9 Wagon St...
$516.60
$574.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: 2nd Row
MSA Nissan Patrol Wagon Gu (Y61) Series 2-3 St Wgn...
$516.60
$574.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: 2nd Row
MSA Toyota Landcruiser 200 Series Lc200 Gx (5 Seater) 2Nd...
$516.60
$574.00
2nd Row 60/40 split. No armrest.
Year: 08/17-CURRENT
Model: LC200 GX (5 Seater)
Position: 2nd Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser Wagon 200 Ser Lc200 Vx/Sahara 2Nd Row...
$516.60
$574.00
2nd Row 40/20/40 Split (AIRBAG SEATS) & Double Lift Armrest. Bottom Armrest Covered Only.
Year: 10/15-Current
Model: LC200 VX Sahara
Position: 2nd Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser 200 Series Lc200 Vx / Sahara Second...
$516.60
$574.00
Toyota Landcruiser 200 Series
LC200 VX / Sahara
10/08- 10/15
Second Row 60/40 Split Inc. Armrest (AIRBAG SEATS)
MSA Toyota Landcruiser Wagon 200 Ser Lc200 Gx/Gxl Second Row...
$516.60
$574.00
Second Row 60/40 Split Fold Up.
Year: 10/08-10/15
Model: LC200 GX GXL
Position: Second Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser Wagon 100 Series Vx Sahara Second Row...
$516.60
$574.00
Second Row 60/40 Split.
Year: 01/98-12/07
Model: 100 Series VX / Sahara
Position: 2nd Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser Prado 150 Series New Gen / Prado...
$516.60
$574.00
Front Twin Buckets (AIRBAG SEATS) + Console Cover + Integrated Lumbar Support.
Year: 11/09-CURRENT
Model: LANDCRUISER PRADO / 150 SERIES NEW GEN PRADO VX / KAKADU / Factory Pack Leather 7 Seater
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser Prado / 150 Series New Gen Prado...
$516.60
$574.00
Second Row 40/20/40 split Inc. Armrest cover.
Year: 11/09-CURRENT
Model: LANDCRUISER PRADO / 150 SERIES NEW GEN PRADO VX / KAKADU / Factory Pack Leather 7 Seater
Position: 2nd Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser Prado 150 Series New Gen / Prado...
$516.60
$574.00
Front Twin Buckets (AIRBAG SEATS) + Console Cover + Integrated Lumbar Support.
Year: 09/13-CURRENT
Model: LANDCRUISER PRADO / 150 SERIES NEW GEN PRADO GX/GXL / 7 Seater (Not Including Factory Pack Leather)
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
NOTE: (Not including Factory Pack Leather)
MSA Toyota Landcruiser Prado 150 Series / New Gen Gx...
$516.60
$574.00
Second Row 40/20/40 split Inc. Armrest cover.
Year: 09/13-CURRENT
Model: TOYOTA LANDCRUISER PRADO / 150 SERIES NEW GEN GX 5 Seater
Position: 2nd Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser Prado / 150 Series New Gen Gx...
$516.60
$574.00
Front Twin Buckets Pair + Console cover (AIRBAG SEATS).
Year: 11/09-08/13
Model: TOYOTA LANDCRUISER PRADO / 150 SERIES NEW GEN GX 5 Seater
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Prado / J120 Gx / Gxl / Vx...
$516.60
$574.00
Front Twin buckets + Console Cover (AIRBAG SEATS).
Year: 03/03-10/09
Model: LANDCRUISER PRADO / J120 GX / GXL / VX / Grande
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 18 cm
MSA Toyota Prado / J120 Gx / Gxl / Vx...
$516.60
$574.00
Second Row 60/40 Split Inc. Armrest Cover.
Year: 03/03-10/09
Model: LANDCRUISER PRADO / J120 GX / GXL / VX / Grande
Position: 2nd Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 18 cm
MSA 4X4 Prado 150 Series/Gx 5 Seater/ Gx/Gxl 7 Seater...
$516.60
$574.00
VEHICLE DATE: 06/21-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Prado 150 Series (06/21-Current) GX 5 Seater/ GX/GXL 7 Seater (Not Including Factory Pack Leather)
Front twin bucket airbag seats with console cover and integrated lumbar support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA 4X4 Prado 150 Vx/Kakadu 7 Seater Front Seat Covers-...
$516.60
$574.00
VEHICLE DATE: 06/21-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Prado 150 VX/Kakadu 7 Seater (Including Factory Pack Leather)
Front twin bucket airbag seats with console cover and integrated lumbar support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA 4X4 Patrol Wagon Gu (Y61) Series 9 Front Twin...
$516.60
$574.00
SUITS Patrol Wagon GU( Y61) Series 9 Wagon ST/ST Plus/ST Titanium/ST
MSA 4x4 Patrol Wagon GU (Y61) Series 9 Front Twin Seat Covers- GU36
SUITS: Patrol Wagon GU( Y61) Series 9 Wagon ST/ST Plus/ST Titanium/ST N-
Front twin bucket airbag seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
FRONT RUNNER Toyota Tundra (2007-Current) Load Bed Load Bars Kit...
$516.60
$574.00
This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pairs of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tundras 2007+
If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This Front Runner Load Bar Kit works with the existing Toyota Tundra factory bed rails.
This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Toyota Tundras 2007+
The Front Runner Load Bar Kit is ideal for mounting accessories to your vehicle when a strong, lightweight, low profile, smaller footprint is preferred.
The Front Runner Load Bar Kits utilize the same 22mm thick HD aluminium extrusions (slats) used in the Slimline II Roof Rack.
The sliding nut t-slots on the Load Bars allow unlimited, ultra secure mounting positions as well as quick removal of accessories and equipment.
Accessories can be mounted to t-slots on the top and bottom of the Load Bars.
DID YOU KNOW? These load bars can be used as slats in a similar width Slimline II Roof Rack. When you buy Front Runner Load Bars you are one step closer to owning a Front Runner Slimline II Roof Rack!
Features
KRTT951T - Toyota Tundra (2007-Current) Load Bed Load Bars Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (15lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 240mm (9")
Length 1490mm (59")
Height 130mm (5")
Shipping Weight:
Weight 8.0kg (17.6lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 2772Mm (L)...
$516.60
$574.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2772mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Features
Consisting of:
1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)
1x KRXS014 - Expedition Rail Kit - Sides - for 2772mm (L) Rack
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Product Dimensions:
2772mm (109.1") L x 1345mm (53") W x 63mm (2.5") H
Weight:
6.99 kg (15.4 lbs)
DIRECTION-PLUS Dp 30 Kit For Volkswagen Amarok - FM603DPK
$517.50
$575.00
Direction Plus™ Fuel Manager Pre-Filter Kit FM603DPK suits Volkswagen Amarok CDBA (2.0L 4cyl) 2012-2019 models, protecting the engine against costly injector failure.
FUEL MANAGER: HOW IT WORKS
When you install the Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter, Fuel Manager will remove most of the contamination by particles and water present in the diesel fuel.
HIGH LEVEL PROTECTION
As a result, the O.E.M fuel filter will do the final and finer filtration. Therefore, this ensures you are maximising the protection of your diesel fuel system.
FRONT RUNNER Expedition Perimeter Rail Kit - For 2772Mm (L)...
$518.40
$576.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2772mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS014 - Expedition Rail Kit - Sides - for 2772mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:2772mm (109.1") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:7.11 kg (15.7 lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 2772Mm (L)...
$520.20
$578.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 2772mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS014 - Expedition Rail Kit - Sides - for 2772mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:2772mm (109.1") L x 1475mm (58.1") W x 63mm (2.5") H
Weight:7.18 kg (15.8 lbs)
FRONT RUNNER Toyota Land Cruiser 76 Gullwing Window Panel /...
$521.10
$579.00
The Gullwing Window Panel is a replacement part for your Front Runner Gullwing Window.
This Glass Gullwing Window Panel is sold as a seperate component in order to replace a damaged window panel.
If you currently own an Aluminium Gullwing Window and would like to swap out your aluminium panel for a glass panel, the Gullwing Window's Panel has been designed to be interchangable. The glass panel blends in well to the Land Cruiser 76's exterior style and allows you to peer into your load bed area for ease of access to your goods.
Consists of:1x Glass panelMaterials used:Tinted and toughened 6mm glassProduct Dimensions:705mm (27.8") W x 440mm (17.3") H x 6mm (0.2") DWeight:5.39kg (11.9lbs)Glass specifications:Visible Light:Transmission: 44Reflection Outside: 5Solar Energy:Total Elimination: 38Reflection Outside: 5Absorption 1: 47Direct Transmission: 47SHGC: 0.62Shading Coefficient:Ratio: 0.71U Value:(W/m2).K (Center of Glass): 5.8
FRONT RUNNER Universal Vehicle Ladder / Medium - LADD019
$521.10
$579.00
This ladder bolts to the body or to the rear barn doors of vans or utility vehicles.
Surface required to secure the ladder to the vehicle is 1060mm 1780mm / 41.7" - 70".
The ladder has 6 steps.
Length from bottom step to top step is 1460mm / 57.5".
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Universal Vehicle Ladder / Medium
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated steel and aluminium
Product Dimensions:
Overall Ladder Length:
Min 1485mm / 58.4"
Max 1786mm / 70.3"
Mounting hole centers:
Min 1022mm / 40.2"
Max 1738mm / 68.4"
Mounting surface required:
Min 1060mm / 41.7"
Max 1780mm / 70"
Weight:
7.87Kg (17.4lbs)
FRONT RUNNER Ford Ranger T6 Winch Plate - WPFR001
$526.50
$585.00
A heavy duty winch plate that allows you to securely fasten a winch to your Ford Ranger T6's chassis, behind the original bumper. This easy to install plate supports most popular winch brands and sizes.
Specifically designed for the Ford Ranger T6.
Supports all popular winch sizes (8 000lbs (3.6t) - 10 000lbs (4.5t)).
Bolts directly to vehicle chassis with supplied hardware.
Fitted behind the original factory bumper, the winch plate and winch is hidden.
Allows access to the winch free spool lever.
Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.
*Please Note: This Winch Plate does not work with Ford Ranger T6 models with Tech Pak Adaptive Cruise Control and Wildtrak models.
Consists of:1 x Winch PlateHardware KitFitting InstructionsMaterials used:Black powder coated 8mm mild steelProduct Dimensions:210mm (8.3") L x 971mm (38.2") W x 195mm (7.7") HWeight:17.6Kg (38.8lbs)
FRONT RUNNER Ute Mountain Top Load Bar Kit / 1475(W)...
$528.30
$587.00
Clear precious load bed space and still haul your adventure gear and toys over your Mountain Top bed cover when with this Pickup Mountain Top Load Bar Kit.
A set of Pickup Bed Load Bars used to transport gear over the bed of your truck when fitted with a Mountain Top cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the OEM tracks of your Mountain Top cover and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the Mountain Top cover tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: This Kit is only suitable for Mountain Top Roll Covers with tilted rails.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS029 - Pick-Up Roll Top Leg Mount / Mountain Top1x LBSK017 - Roof Load Bar Pair 1475mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.38kg (18.47lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1590mm (63")Height: 150mm (6")Shipping Weight:Weight: 8.2kg (18lbs)
FRONT RUNNER Jeep Gladiator (2020-Current) Egr Rolltrac Load Bed Load...
$528.30
$587.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Jeep Gladiator when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1345mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT012 - Jeep Gladiator (2020-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK015 - Roof Load Bar Pair 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.66kg (16.89lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1460mm (57"); Height: 165mm (6")
Shipping Weight:
Weight: 8.2kg (18lbs)
LIGHTFORCE Viper Lightbar 40 Double Row Bezel Design - LFLB40D
$529.20
$588.00
The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts
FRONT RUNNER Cargo Slide/Fridge Slide / 80L To 90L -...
$530.10
$589.00
Front Runner Cargo Slide / Fridge Slide 80L–90L
The Front Runner Cargo Slide / Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide quick and convenient access to larger portable fridges, camping equipment, toolboxes, and adventure gear. Ideal for 4WDs, canopies, ute trays, drawer systems, and touring vehicles, the slide maximises accessibility while maintaining a compact footprint.
Built with high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, allowing easy access to equipment without climbing into your vehicle. The rattle-free design keeps your cargo secure during travel, while the clip latch locking system prevents unwanted movement when closed.
Constructed from durable black powder-coated steel and featuring a hold-open mechanism for uneven terrain, the Front Runner Cargo Slide is engineered for demanding off-road, touring, camping, and worksite environments.
Features
Suitable for 80L–90L portable fridges
High-strength bearing drawer slide mechanism
Nearly 100% tray extension for easy access
Rattle-free design during travel
Clip latch locking system
Hold-open mechanism for uneven surfaces
Mounts to most flat surfaces
Compatible with Front Runner Drawer Systems
Pre-drilled mounting holes for simple installation
Includes mounting hardware for wood and metal surfaces
Heavy-duty black powder-coated steel construction
Ideal for fridges, storage boxes, tools, and touring equipment
Specifications
Overall / Closed Dimensions: 942mm x 578mm x 85mm
Open Dimensions: 1858mm x 578mm x 85mm
Internal Dimensions: 884mm x 507mm x 64mm
Weight: 18.2kg
Load Rating: 113kg (250lbs)
Material: Black Powder-Coated Steel
What's Included
1 x Front Runner Cargo Slide
Installation Hardware
Fitting Instructions
Frequently Asked Questions
What fridge sizes will fit this Front Runner Cargo Slide?
This model is designed for many popular portable fridges in the 80L–90L range. We recommend comparing your fridge dimensions with the tray measurements before purchasing.
Can this Cargo Slide be installed in a canopy, ute tray, or drawer system?
Yes. The slide can be mounted to most suitable flat surfaces, including canopies, ute trays, drawer systems, and touring vehicle storage setups.
Does the slide lock securely during travel?
Yes. The integrated clip latch locking system and rattle-free design help keep your fridge and equipment secure while driving on-road and off-road.
Note: Fridges, storage containers, and accessories shown are sold separately.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
