AUDIO20JUNE

The stylish all-new ALPINE 8" Performance Quad-Coil Subwoofer System - PWE-S8 lets you add deep, accurate bass to your system without taking up any valuable space in your car. Despite its ultra-compact size coming in at 340mm wide, 230mm tall and just 75mm deep, the high-excursion 8-inch subwoofer gives a strong 120W RMS of bass output. This compact subwoofer is designed to work well virtually anywhere in a vehicle, even under a seat. Plus, it’s cast metal construction makes it ultra-durable without sacrificing any performance. Moreover, you’ll also find an input for a wired remote that lets you adjust your bass level easily from the driver’s seat. The side panel offers easy access to RCA and auto-sensing speaker inputs. The side panel also gives access to Phase, Gain, LP Crossover and Remote Sub Level controls for greater flexibility during installation. Features Compact Powered Subwoofer Mounting Hardware Included Remote Bass Level Knob Included Specifications Built-In Amplifier (120W RMS/240W MAX) 8” Subwoofer with High-Excursion Cone Durable Cast Metal Construction Dimensions: 340mm W x 230mm H x 75mm D Weight: 4.6kg Frequency Response: 25 ~ 152Hz Variable Low-Pass Crossover: 80 ~ 200 Hz Variable Phase Control: 0°/180° RCA (0.1-4V) / Speaker Input (1.5-30V Auto)

Maximize the fun Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact. Dishing it out The S2-SB12V comes loaded with Alpine's S2-W12D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to pump out the lows you crave. Getting it together Two S2-SB12V enclosures can be linked using Alpine's KTX-H12 linking kit (sold separately). These heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver finish matches the enclosure trim for a neat, coordinated look. READ LESS Product highlights: 12" ported subwoofer enclosure loaded with Alpine's S2-W12D4 subwoofer connects to a second S2-SB12V enclosure with linking kit (sold separately) Kevlar-reinforced pulp cone with Santoprene rubber surround power handling: 600 watts RMS (1800 watts peak) frequency response: 23-215 Hz 2-ohm impedance dimensions: 17"W x 14.625"H x 15"D warranty: 1 year MFR # S2-SB12V Item # 500S2SB12V What's in the box: Linkable ported enclosure loaded with one S2-W12D4 subwoofer driver Product registration information Warranty information Important notice

Alpine RUE-BK01A Wireless Rotary Knob Controller Take full control with a simple turn. The Alpine RUE-BK01A Wireless Rotary Knob is designed to deliver quick, precise control of volume and camera switching, enhancing your driving experience with convenience and safety. Engineered specifically for Alpine’s next-generation Halo display head units, this wireless controller integrates seamlessly with your system while maintaining a clean, factory-style finish. Key Benefits Wireless control for volume adjustment and camera switching Seamless integration with Alpine Halo display systems Quick, tactile control without relying on touchscreen input Clean, OEM-style installation directly onto the display Improves driving safety and ease of use Designed for Alpine Halo Systems The RUE-BK01A is purpose-built to work with Alpine’s latest display audio units, mounting directly onto the screen for a sleek and integrated look. Compatible with Alpine iLX-511A Compatible with Alpine iLX-F509A Enhanced Control and Convenience Adjust volume easily with a simple rotary motion Toggle between vehicle cameras with a press Reduces distraction by minimising touchscreen interaction Provides intuitive control while driving Wireless Installation No complex wiring required Direct mounting onto compatible Alpine displays Maintains a clean and minimal dashboard setup Specifications Model: RUE-BK01A Connection: Wireless Functions: Volume control and camera selection Power: Coin/button battery Important Information This product contains a coin/button battery. Please refer to the user manual for safety instructions and handling guidelines. Why Choose Alpine Accessories Designed specifically for Alpine head units Premium build quality and finish Improves usability and driver convenience FAQs Is this compatible with all Alpine head units?No, it is specifically designed for iLX-511A and iLX-F509A models. Does it require wiring?No, it connects wirelessly for simple installation. What functions does it control?It controls volume and allows switching between vehicle cameras. Where does it mount?It mounts directly onto compatible Alpine Halo displays. Upgrade Your Control Add precise, convenient control to your Alpine system with the RUE-BK01A wireless rotary knob.

The weather-resistant HCE-C2600FD will help you steer away from obstacles in front of and on the sides of your vehicle, even in the off-road elements. HDR (High Dynamic Range) technology enhances detail in light and dark conditions Selectable 3 View Modes (Panorama/Corner/Ground) with select Alpine head units via Direct Connection and Multi-Camera Selector 180 degree horizontal, 125 degree vertical viewing angles Automatic exposure and white balance adjustment Universal Mounting Bracket and 10ft Waterproof Direct Extension Cable Included Compatible with Multi-Camera Selector (KCX-C250MC or KCX-C2600B sold separately) Compatible with License Plate Camera Mounting Kit (KTX-C10LP sold separately) Tech Specs Wide Illumination Range (1.5 to 100,000 Lux) 1/4 inch CMOS Image Sensor (1280 x 960, 1.2M pixels) IP 68 Water and Dust-proo

GENERAL SPECIFICATIONSContinuous Power Handling (RMS): 600 WSystem Nominal Impedance: 2 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: NoPHYSICAL SPECIFICATIONSExternal Width (W): 31.375 in / 797 mmExternal Height (H): 15.18 in / 386 mmExternal Depth (D1)L 20.3 in / 516 mmExternal Top Surface Depth (D2): 15.75 in / 400 mmNet Weight: 60.3 lb / 27.35 kg

MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening. Component Tweeter Size mm (in.) 35 (1.38) Power Handling - Peak W 180 Impedance Ohm 4 Voice Coil Ø 28 (1.1) Frequency Response Hz 1k ÷ 25k Magnet size D x d x h mm (in.) 27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12) Weight of one speaker kg (lb.) 0,075 (0.16) Magnet Neodymium Dome Tetolon D mm 28 Re Ohm 3,3 Fs Hz 900 Le mH 0,024 Vas I - Mms g 0,4 Cms mm/N 0,08 BL T*m 2 Qts 1,1 Qes 1,7 Qms 3,3 Spl dB 91 A 53,4 mm 2.1 in. B 48 mm 1.89 in. C 28 mm 11.1 in. D 13,5 mm 0.53 in. E 72 mm 2.8 in. F 45,6 mm 1.8 in. G 23 mm 0.9 in.

The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. Component Tweeter Size mm (in.) 29 (1.14) Power Handling - Peak W 120 Power Handling - Peak Note (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 25 (1) Frequency Response Hz 1.4k ÷ 22.5k Magnet size D x d x h mm (in.) 24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14) Weight of one speaker kg (lb.) 0.07 (0.14) Magnet Neodymium Dome Tetolon D mm 29 Re Ohm 3,9 Fs Hz 1200 Le mH 0,02 Vas I - Mms g 0,17 Cms mm/N 0,1 BL T*m 1,6 Qts 0,55 Qes 1,98 Qms 0,57 Spl dB 91 A 44 mm 1.73 in. B 41 mm 1.61 in. C 27 mm 1.06 in. D 17 mm 0.67 in.

R2-Series Premium Speaker System Suitable for Single-Cab LandCruiser 78 & 79 Series Turn up the bass in your Single-Cab 70 Series — the next Generation R-Series are born to be played loud with the all-new R-Series ‘direct fit’ premium aftermarket speaker upgrade. Alpine’s premium sound solution has been engineered to provide rock solid durability and good looks, with amazing sound and clarity. Equipped with Alpine’s huge R2-Series 6×9” speakers, experience punchy, concise bass as well as uncompromised sound performance and richness possible through Hi-Res Audio certification. Comfort and Convenience have not been forgotten. The LC70-269SC-R houses drink compartments capable of holding a 1.25 litre bottle to a 375ml can – including large pockets to hold maps, tablets, or books. For technological needs, there are USB charge ports in both door pods that allow charging of up to 4 devices at once. Built-in puddle lights also help light the way, assisting vehicle exits in unfamiliar situations. Formed from injection-moulded and highly-resistant PC/ABS polymers, each part is highly durable and structured to withstand almost anything life throws at it. The sleek yet tough design of the LC70-269SC-R elevates the interior aesthetic whilst honouring the rugged history of the vehicle itself. The updated LC70-269SC-R is the pinnacle of Hi-Fi sound performance, design and practicality. A must have accessory to ultimate 21st century off-road lifestyle. Perfect Integration Alpine’s premium sound upgrade for LC70 Series (Single Cab) is the complete audiophile and lifestyle solution. The huge 6×9-inch R2-Series speakers not only sound great, but also provide clean and concise bass performance. Alpine’s LC70-269SC-R combines rugged looks with subtle design cues from the vehicle itself to create a factory-look product for the 21st century. Light Up The Outdoors Avoid getting messy in the mud. Alpine’s puddle light is designed for all your outdoor adventures, illuminating the ground underneath and drawing attention at night. Never have to worry about muddy puddles again, as the ground will be lit up in style. Highly Durable Tough Grille  Without compromise, these flush-fit integrated speaker grilles have been engineered from a strong PC/ABS polymer blend, ensuring high durability and abrasion resistance. A high-gloss black Alpine emblem adorns the grille, providing a striking contrast and premium finish to each door. 4x USB Charging Ports The on-board USB inputs sit discreetly yet elegantly within the speaker pod design, allowing up to 4 devices such as a tablet or smartphone to charge at any one time. This provides a convenient USB charge point at each door, such as the front driver door, front passenger door, rear passenger left and right door. Premium Design Tweeter Housing LandCruiser 70 Series never looked so good. The bold design of the tweeter housing fits into the top dash corners directly replacing the OEM dash trim panels, providing perfect integration with an OEM look. With the tweeters up on the dashboard, the sound image is up high where it should be and overall sounds incredible. Carry Your Life With You Alpine’s design for the LC70 Series integrates a number of convenient necessities. Meticulously designed to accommodate both large bottles and small cans, as well as maps, tablets and almost anything else that will fit. Alpine’s 70 Series speaker solution is ready for your next adventure. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB.   FEATURES Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design SPECIFICATIONS General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 60Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 160mm x 240mm Woofer Diameter (in): 6″ x 9″ Woofer Mounting Diameter (mm): 167mm Woofer Mounting Diameter (in): 6-19/32″ Woofer Mounting Depth (mm): 75mm Woofer Mounting Depth (in): 3″ COMPATIBILITY Compatible with LandCruiser VDJ 76, 78 & 79 2009> onwards (Single-Cab Only)

Elevate your factory audio system to an entirely new level with Alpine’s ‘direct-fit’ premium speaker upgrade to suit Toyota Hilux. Exclusively designed by Alpine, the tweeter housing achieves superior sound quality, as well as optimises staging and imaging. With its striking appearance and premium finishes inclusive of a machine finished metal Alpine emblem and ornate black chrome and metal ring accents to instantly enhance your in cabin aesthetic. The Alpine engineered and manufactured high-quality speaker housings ensures uncompromised sound performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Whatsmore, S-Series continues to establish the benchmark in sound quality and value by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth allowing the 1” soft dome tweeters come alive in the upper harmonics, delivering an incredibly smooth and detailed high frequency response that’s extended right up to 40kHz — so you can hear the finest nuances in your music. Take Hilux sound to the next-level with the new Hi-Resolution S-Series Premium Sound Solution. AN ALL-NEW AUDIOPHILE EXPERIENCE FOR S-SERIES What is Hi-Res Audio? With Hi-Res Audio streaming services and music downloads available you can now appreciate a higher sampling rate than in CD’s for the playback of music, which brings your favourite music tracks to life with extreme clarity. Alpine’s Hi-Res Audio Certified Head Units, Amplifiers and Digital Signal Processors are painstaking engineered to deliver faithful audio reproduction from high resolution sources and recordings with sample rates up to 192kHz/24Bit. These components are optimised for high definition playback and breathtaking performance, true to the artists original recording. Why Hi-Res Audio? Listening to Hi-Resolution Audio allows you to feel every emotion and hear every nuance; every detail of your favourite artist’s original studio performance is reproduced to perfection. Hi-Res Audio provides absolutely no distortion for the ultimate listening experience. Why Hi-Res Audio Certified Speakers? Hi-Res Audio goes beyond the limits of ordinary speakers. To accurately render the sound of Hi-Resolution sound sources and recordings in true high definition the reproduction of an extended dynamic frequency range right up-to 40kHz is paramount. Hi-Res Audio Certified All-New for S-Series, Hi-Res Audio Certification brings a whole new dimension of sonic excellence to your everyday drive. With an impressive extended dynamic range, playing upper harmonics all the way up to 40kHz, your tracks will come alive with a level of detail and nuance faithful to that of the original recording. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housings are made from premium injection moulded PC/ABS polymer and feature machine cut Alpine logo complimented by black chrome and machined metal accents which are all pre-assembled components ready for direct installation to suit your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Alpine Patented Technology for Superior Sound These speakers adopt a 35mm voice coil and a precision strontium magnet motor structure delivering extraordinary cone velocity for incredible linearity and powerful bass to get an exquisite listening and driving experience. Glass Fiber Composite Woofer Cone The woofer features an all-new glass fiber composite cone, which due to its directionally weaved construction is engineered to be far stronger than a traditional oval cone diaphragm. The resulting rigidity coupled to glass-fiber’s  lightness results in highly controlled cone excursion producing excellent audio reproduction. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass. Features Woofer 6.5″ (165mm) Lightweight Glass Fiber Composite Component Speaker HAMR (High Amplitude Multi-Roll) Surround Large 35mm Voice Coil Magnet Material: Strontium Ferrite Tweeter 1″ Extended-Range Soft Dome Magnet Material: Ferrite Application Type: Premium Direct-Fit OEM Replacement for Ranger Grill: Perforated Net Crossover Network Woofer: Copper Air-Coiled Wound Inductor Tweeter: High Quality Audio-Grade Polycap Power Handling Peak Power: 240 Watts RMS Power: 80 Watts (CTA-2031 Compliant) General Frequency Range: 55 Hz – 40 kHz Impedance: 4 Ohms Sensitivity: 88 dB/W Recommended Amplification: up to 80W RMS per channel

Features Includes Preloaded R2-W10D4 10” R-Series Subwoofer Ground-breaking Alpine Halo Design ProLink™ Ported Enclosure Design USA Designed for Optimal Bass and Sound Quality Performance CARB compliant 3/4-inch MDF construction Premium Black Carpet Silver Alpine Embossed Side Logo Badge Brushed Aluminium Finished Metallic Front Baffle KTX-H10 Linking Kit Ready KTE-10G.2 Mesh Grille Ready Specifications Peak Power Handling: 2250W RMS Power Handling: 750W High-Excursion Overhung Voice Coil Configuration 65.5mm Voice Coil with High-Temp 4-Layer DVC Winding on Aluminium Former Stacked High-Grade Strontium Ferrite Magnets Cast Aluminium Frame Progressive Spider with Reinforced Layer Tinsel Leads Airflow Management & Heat Transfer System Optimised Dual Flare Pole Vent Concealed Mount Gasket Reinforced Parabolic Cone Structure (Pulp/Kevlar & PP/Mica/Talc Dust Cap) High-Amplitude Multi-Roll (HAMR) Surround Dimensions: 16” W x 12.6825” H x 14.5” D Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) 12 Gauge OFC Speaker Box Wire Binding Post Terminal Cup Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation) Nominal Impedance: 4Ω+4Ω Dual Voice Coil 2Ω Impedance Loading: (4Ω+4Ω Parallel Circuit) Frequency Response: 26Hz-200kHz Vented Enclosure Tuning Frequency: 36Hz Sensitivity 84dB

The Alpine i905-LC70 upgrades the interior of your Toyota LandCruiser 70 Series with a 9-inch WXGA touchscreen designed to integrate with the factory dashboard. Wireless Apple CarPlay, wired Android Auto and built-in TIDAL provide convenient access to navigation, calls, messages and music. A built-in 4 x 50W Class-D amplifier and advanced sound tuning help deliver clear, powerful audio for your off-road drives. Key Features 9-inch WXGA touchscreen (1280 x 720) Wireless Apple CarPlay Wired Android Auto via USB Built-in TIDAL streaming with wireless Hi-Res audio support Built-in 4 x 50W Class-D amplifier AM/FM and DAB+ radio HDMI input and output Dual USB connections Support for up to two cameras Hi-Res audio playback up to 96kHz/24-bit and LDAC wireless audio 3-year warranty when installed by an authorised Alpine dealer Specifications Specification Details Model Alpine i905-LC70 Display 9-inch WXGA touchscreen, 1280 x 720 resolution Apple CarPlay Wireless or USB Android Auto Wired via USB Amplifier Built-in 4 x 50W Class-D Radio AM/FM/DAB+ Connections HDMI input/output, 2 USB ports and 2 camera inputs Hi-Res Audio Up to 96kHz/24-bit, with LDAC wireless audio support Warranty 3 years when installed by an authorised Alpine dealer

Replace your factory screen with Alpine's premium 11" Halo11 multimedia system. Designed for the Isuzu D-MAX and MU-X (2019–2023), this upgrade integrates with your vehicle's dashboard while retaining key factory features. Enjoy wireless Apple CarPlay and Android Auto for easy access to navigation, calls, messages and music. Your factory steering wheel audio controls remain functional, and the factory reverse camera automatically activates when reversing. The high-resolution 11" WXGA touchscreen features an adjustable viewing angle from +45° to -20° and height adjustment of up to 3cm, allowing you to position the display to suit your dashboard and reduce glare. With Hi-Res Audio, LDAC wireless technology, built-in Class-D amplification and HDMI connectivity, the iLX-F511A delivers an enhanced entertainment experience on every drive. Need professional installation? Our Brookvale workshop can help with your Alpine upgrade. Key Specifications Screen 11" WXGA touchscreen (1280 x 720) Apple CarPlay Wireless or USB Android Auto Wireless or USB (wireless compatibility depends on phone) Amplifier Built-in Class-D amplifier, 4 x 50W Radio AM / FM / DAB+ Camera Inputs 2 built-in camera inputs. Supports up to 4 cameras with the separately sold KCX-C250MC Multi-Camera Selector Interface Inputs HDMI, 2 x USB Audio Hi-Res Audio and LDAC wireless technology Factory Features Retained Steering wheel controls and factory reverse camera Display Adjustment +45° to -20° tilt and up to +/- 3cm height adjustment Warranty 3 years when fitted by an authorised Alpine dealer What's in the Box Included Items Head unit, 2 x USB cables, microphone, GPS antenna and KAE-1DB blanking plate   FAQ Does it fit my 2024 D-MAX? No. This kit fits the 2019 to 2023 D-MAX only. Will my steering wheel buttons work? Yes. Want it fitted? Our Brookvale workshop installs Alpine kits every week. Contact our team to arrange professional installation.

ALPINE R2-SERIES 12" HALO SUBWOOFER ENCLOSURE-R2-SB12V A subwoofer enclosure that sounds as good as it looks. Alpine’s preloaded, linkable subwoofer enclosures give you powerful performance with the unique Alpine Halo design and ProLink™. The new 2nd generation R-Series subwoofers take bass performance to extreme levels, delivering thunderous, ground-pounding bass. With Alpine’s enhanced sound performance, the R-Series subwoofers are highly accurate, creating a perfectly matched sound system to R-Series amplifiers and R-Series speakers – building an overall cohesive theme with its entire full-range Hi-RES Audio certified system. The R2-SB12V is designed for amplifier compatibility with 20hm loads. Optimal Sound Performance The R2-SB12V delivers incredible low-down, ground-pounding bass for the ultimate sound experience. The USA designed enclosure features an optimised vent and rounded internal port edges that maximises output performance of the subwoofer. The result is a higher total sound output for deep, powerful and accurate bass coupled with R-Series renowned reliability and endurance. Built to Perform Without compromise the R2-SB12V is built from high-quality construction materials to achieve a custom look, without the custom work. Made from 3/4-inch medium density fibreboard (MDF) with internal edge bracing, the R-SB12V is sturdy and rugged, yet stylish with a premium black carpet covering and brushed aluminium finish on the metallic front baffle.   Tuned for R-Series The R2-SB12V includes a preloaded R-Series R2-W12D4 12-inch subwoofer that’s tuned to 35Hz for optimised performance with Alpine R-Series sound system speakers and amplifiers. Dual 4Ω voice coils are wired in parallel for a 2Ω load that’s compatible with the R-Series R-A75M Mono Power Amplifier. Gold-plated binding post terminals allow for speaker wire, ring terminal, or quick disconnect banana plug connections.   Stand Out In the Crowd The Alpine Halo platform modernises the look and feel of any vehicle. Drawing inspiration from the sleek, tapered lines and silver accent of the Alpine Halo Display, the R2-SB12V shares the same design cues, with a curved silver trim and a metallic front baffle. The R2-SB12V offers not only premium sound performance, but also elevates the interior of the vehicle for a subwoofer you can be proud to show off.   KTX-H12 Linking Kit  ProLink™ is unique to Alpine and allows you to link two R2-SB12V enclosures together using an optional KTX-H12 Linking Kit (sold separately) to create a dual subwoofer-enclosure. Now you have the flexibility in power and price to use a single subwoofer or add another subwoofer immediately if more bass is desired, or gives you the capability to upgrade your bass later-on. Features Includes Preloaded R-W12D4 12” R-Series Subwoofer Ground-breaking Alpine Halo Design ProLink™ Ported Enclosure Design USA Designed for Optimal Bass and Sound Quality Performance CARB compliant 3/4-inch MDF construction Premium Black Carpet Silver Alpine Embossed Side Logo Badge Brushed Aluminium Finished Metallic Front Baffle KTX-H12 Linking Kit Ready   Specifications Peak Power Handling: 2250W RMS Power Handling: 750W High-Excursion Overhung Voice Coil Configuration 65.5mm Voice Coil with High-Temp 4-Layer DVC Winding on Aluminium Former Stacked High-Grade Strontium Ferrite Magnets Cast Aluminium Frame Progressive Spider with Reinforced Layer Tinsel Leads Airflow Management & Heat Transfer System Optimised Dual Flare Pole Vent Concealed Mount Gasket Reinforced Parabolic Cone Structure (Pulp/Kevlar & PP/Mica/Talc Dust Cap) High-Amplitude Multi-Roll (HAMR) Surround Dimensions: 17” W x 14.625” H x 15” D Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M) 12 Gauge OFC Speaker Box Wire Binding Post Terminal Cup Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation) Nominal Impedance: 4Ω+4Ω Dual Voice Coil 2Ω Impedance Loading: (4Ω+4Ω Parallel Circuit) Frequency Response: 24Hz-200Hz Vented Enclosure Tuning Frequency: 35Hz Sensitivity 84dB   Unique ProLink™ Design  When you’re looking to make a noticeable impact in your sound system, you add a subwoofer that will bring out the low-end bas of your music. But what if you already have a single subwoofer and still crave more bass? You could throw out your single enclosure and purchase a new dual enclosure or you can build your bass with Alpine’s new ProLink™ technology.

An innovation that exceeds expectations time and time again. The i905-LC16 delivers an all-new versatile design equipped with a stunning 9” WXGA high-definition centrepiece display that sits high and proud on the dash, crafted with a lustrous high-class piano black finish. Seamlessly integrated within the premium OEM quality fascia is Alpine’s signature centre glass keys showcasing incredible attention to detail and design, with a smooth tactile feel. Equipped with wireless Apple CarPlay and Android Auto (USB), an endless array of entertainment and smartphone apps are available to use in your dashboard. Get directions with maps and navigation apps, send and receive messages, make calls and listen to music all without a cable in sight. With TIDAL now built-in, soak in your favourite songs with a new level of fidelity and elevate your music streaming experience in wireless Hi-Res audio like you’ve never heard it before. For those with a large existing library of Hi-Res audio content that is also supported up to 96kHz 24bit. A world-first innovation, the i905-LC16 equipped with a powerful built-in Class-D amplifier to deliver the richness and dynamics of your music for the most superior sound performance. Moreover, with Alpine’s extensive sound tuning built-in you can apply simple one touch audio adjustments to make your cabin space sound brilliant, or for pro-level users and enthusiasts a host of advanced tuning functions are available. Alpine’s i905-LC16 is the pinnacle of audio performance, design and practicality. Delivering a dynamic in-cabin interior aesthetic and incredible entertainment experience—this is a must have premium solution for all audiophiles. Features Radio / DAB Tuner Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12) Memory: Auto Memory Seek Mode: Local, DX, Pre-Set, Service RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT DAB+/DMB Supported DAB+ Slideshow Service DLS (Dynamic Label Service) DAB Service Following RDS Fallback (where available) Auto Ensemble/Service Memory Service Search Function PTY Search Function Alphabet Search Function BLUETOOTH® Built-in BLUETOOTH® Module V4.2 HFP (Hands-Free Profile) Compatible A2DP (Advanced Audio Distribution Profile) Compatible AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible Phone Book Synchronisation Speed Dial: 4 Preset Memory (per phone) Call History Display: Outgoing Calls / Incoming Calls / Missed Calls Redial Function Speech Volume Level Adjustment: (Outgoing and Incoming) 24 Menu Languages Microphone Included Works with iPhone® Compatible with iPhones featuring a lightning connector Various search functions and Album Artwork Display Battery Charging Connectivity Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone) Works with Android Auto (requires Android Auto enabled handset connected through USB)   **Not all handsets supported Navigation Function Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps Includes GPS / Glonass enabled navigation antenna USB Media Connection 2x USB cable included USB port 1: data port / USB port 2: charging port Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible Video Playback: MP4, MOV, FLV, MKV compatible Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2 Various search functions included Sound Tuning Bass Engine SQ and Bass Engine PRO sound tuning Subwoofer Level Adjustment 4 V PreOut 10 Equalizer PreSets 13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer 6-Channel Digital Time Correction 2-way Digital Crossover Independent Source Volume Level Setting General 4x 50 Watts Class-D High Power Amplifier 11-inch Capacitive Touch-Screen WXGA Display (1280 x 720p) Display angle adjustable after installation 3 PreOuts (4 V, Front / Rear / Subwoofer) 1 A/V AUX Input (3.5 mm micro jack) 1 HDMI input / 1 HDMI output 2 USB Ports (1x USB data port / 1x USB charging) Steering Wheel Remote Control Ready Vehicle Display Interface Ready (UART connection) Remote Control Ready 2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box Camera Distance Guides (adjustable) Live Contrast Adjustment Menu Language: 24 Languages Auto Dimmer Anti-theft security code Engine Start-Stop unaffected 3-Year Warranty when installed by Authorised Alpine Dealer Specifications General Power Requirement – 14.4V DC (11-16V allowable) Operating Temperature – -20°C to +60°C Power Output – 50W x 4 Maximum Current Consumption – 15A Audio Output Level Preout (Front, Rear): 4V/10k ohms (max.) Preout (Subwoofer): 4V/10k ohms (max.) Weight 2.3kg Screen Screen Size: 9 inch Laminated WXGA LCD Type: Transparent Type TN LCD Operation System: TFT Active Matrix Illumination System: White LED Backlighting Effective Number of Picture Elements: 99.99% Colour System: NTSC, PAL FM Tuner Tuning Range –   87.5 -105MHz Mono Usable Sensitivity –   8.1 dBf (0.7μV/75 ohms) 50dB Quieting Sensitivity –   12dBf (1.1μV/75 ohms) Alternate Channel Selectivity –  80dB Signal-to-Noise Ratio –  65dB Stereo Seperation –  35dB AM Tuner Tuning Range –   531-1701 kHz Usable Sensitivity –  25.1μV/28 dBf DAB Tuner Tuning Range –   174 – 240 MHz Usable Sensitivity –   -100dBm Signal-to-Noise Ratio – 90dB USB (1) USB Requirements: USB 2.0 Max. Power Consumption: 2,400 mA (CDP Support) USB Class: Mass Storage Class, Play From Device File System: FAT 16/32, exFAT MP3 Decoding: MPEG-1/2 AUDIO Layer-3 WMA Decoding: Windows Media™ Audio AAC Decoding: ACC-LC format ′′.m4a′′ file FLAC Decoding Number of Channels: 2-Channel (Stereo) Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate Total Harmonic Distortion (at 1kHz): 0.005% DynamicRange(at 1kHz): 95 dB Signal-to-Noise Ratio: 95 dB Channel Separation (at 1kHz): 90 dB USB (2) USB Class: Charge Only Max. Power Consumption: 1,500 mA (CDP Support) BLUETOOTH® BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz) Output Power: +4 dBm/2.51 mW Ave. (Power Class 2) HFP: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone Book Access Profile) HSP (Head Set Profile) A2DP: A2DP (Advanced Audio Distribution Profile) AVRCP: AVRCP (Audio/Video Remote Control Profile) SPP (Serial Port Profile) HDMI Section Input Format: 720p/480p/VGA Output Format: 720p/480p GPS Reception Frequency 1575.42 +/- 1.023 MHz Reception Sensitivity (Search) -136dB max. Wi-Fi Frequency Ranges IEEE 802.11 b/g/n (2.4 GHz) IEEE 802.11 a/n/ac (5 GHz) Channels 1 -13 ch (2.4 GHz) 149 – 165 ch (5GHz) Security Protocols WPA3/WPA2-PSK (TKIP, AES) Dimensions Din Size: 1DIN chassis and 9” Capacitive Touch Screen Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm Display Size (W x H x D) mm: 268.9 x 178 x 54.7  

Product Details Halo9 9” High-Res Audio Receiver with Wireless Apple CarPlay / Wireless Android Auto / HDMI / USB / Dual Camera / Bluetooth / Hi-Res Audio Wireless / LDAC / DAB+ Suitable for VE Commodore Series-1 (2006-2010) Sporting luxury design exclusively engineered for your VE Commodore Series-1Elevate your driving experience to a new level with Alpine’s premium 9’’ multimedia infotainment luxury solution, exclusively designed and engineered for VE Commodore Series-1. Housing a stunning ultra-high-quality WXGA centrepiece display with Hi-Res Audio specifications and advanced wireless connectivity, the iLX-F509A brings a premium feel and aesthetic upgrade to the interior, while offering the latest technology, entertainment and convenience. Experience ultimate visual entertainment like never before through the WXGA 9″ high-resolution display with 2.7 million pixel elements. The iLX-F509A showcases razor sharp images and incredible colour vibrancy to the dashboard, displaying HDMI sources or USB video in stunning high-definition. Equipped with Apple CarPlay and Android Auto, an endless array of smartphone features and entertainment is available on the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music — commanding it all via the display or voice control. Enjoy all your favourite audio with a limitless amount of options such as music apps including Spotify, Vox, Apple Music, Amazon Music, Podcasts and even DAB+ digital radio providing a wide range of digital only radio stations. Experience superb audio fidelity with Hi-Res Audio and LDAC wireless technology — play high-resolution audio tracks via USB, or music streaming services via smartphone, ensuring the music is reproduced with clarity and authenticity as the artist intended. For a detailed list of apps that have been CarPlay approved by Apple, head over to their website here: http://www.apple.com/au/ios/carplay/ The 7-Inch Dynamic Drive Assist capacitive display elevates your vehicle interface, giving you smartphone-like and intuitive command of climate settings. Even more thrilling, the sports display mode, provides real-time vehicle information such as speed, tachometer, gear shift, brake and acceleration, oil temperature, voltage and much more, there is even a stop watch letting you capture acceleration and lap times when your out on the track. Making parking easier then ever, the 7″ display shows visual representation of factory installed park sensors when engaged, plus you can add-on an optional Alpine front and rear camera system to the Halo9 9-Inch display. High-Definition Laminated Display Alpine’s incredible WXGA display has to be seen to be believed, colours are intensely vibrant and realistic, video motion is ultra-smooth and the image detail is razor sharp. Moreover, with its laminated display technology brightness and contrast is truly next level, so no matter the lighting conditions or viewing angle the display reveals incredible clarity and true-to-life colour. Alpine’s new WXGA high definition display is simply stunningly beautiful—bringing a cinematic experience right into your dashboard. Apple CarPlay Wireless or USB No wires, no fuss, just get in and drive with your iPhone wirelessly connected to use Apple CarPlay. Listen to your favourite music apps, make and receive calls or messages, use maps or navigation apps, all at your command via the display or voice control. If you need to charge-up then plug-in your iPhone via USB. Android Auto Wireless or USB The convenience of Android Auto allows a wide-array of applications into the dash of your car. Interact via touch or voice command you can make calls and messages, play music apps and much more. All this, now with wireless connectivity or if you need to charge-up on the go simply connect via the USB port.Smartphone Navigation  Through the incredible Alpine WXGA high-definition display you have the access and convenience of highly accurate navigation, further enhancing the Apple CarPlay and Android Auto and experience. With an array of navigation platforms and apps available, for example Apple Maps, Google Maps, Waze and Sygic you can search and get to your destination with ease. You’ll have voice and visual prompts of turn-by-turn navigation and finding locations is a breeze via the display or using voice control. Furthermore, with the built-in GPS/GLONASS circuit and antenna, as well as vehicle speed pulse sense connectivity ensures your actual vehicle position has pin-point accuracy on the road. This keeps you on route when driving through complex and dense city road systems, tunnels, bridges and elevated mountain highways and terrains.   Spotify Access the worlds music library with millions of tracks and episodes available on Spotify. When using Apple CarPlay or Android Auto with the Spotify app, you can play the latest songs from your favourite artists, charts and playlists. Plus, browse through the collections of friends, artists, celebrities and radio stations all from the comfort of the driver’s seat. All this, without a single physical connection thanks to the added convenience of Wireless Apple CarPlay and Android Auto. Audio Streaming Apps With Apple Music onboard for Apple CarPlay you have access to 60+ million ad-free songs at your fingertips which you can search genres, artists, podcasts and expertly crafted playlists. With the use of Apple CarPlay or Android Auto, Amazon Music and YouTube Music provides limitless entertainment to stream or download songs from a list of over 40 million ad-free tracks. Amazon Music, YouTube Music and Apple Music are paid subscriptions. Tidal Built-In With TIDAL built-in, stream all your favourite artists wirelessly in incredible master-quality definition. Providing you exclusive access to high-profile music and original content–experience a more intimate connection with music creators through intuitive playlist curation and ability to save your favourite albums, tracks or playlists to the preset menu for quick access. Furthermore, MQA Studio playback ensures absolute audio authenticity, exactly to the artists original recording. Never before seen in car audio, TIDAL’s wireless Hi-Res audio streaming is a must for the modern audiophile. Built-in Class-D Amplifier An industry world first, the iLX-F509A is equipped with Class-D amplifier technology producing a massive 50 x 4 Watts of power, delivering the best sound quality and dynamics from high-resolution music. Class-D amplifiers are known to be highly efficient and capable of beautiful high-end sound reproduction with significantly reduced noise and phase shift. What’s more, new ultra-high-spec fans and internal heat sinks direct and dissipate any unwanted heat, ensuring optimum temperature control and audio performance. External Control Knob (RUE-BK01A sold separately) The RUE-BK01A external control knob (sold separately) connects wirelessly to the iLX-F509A and can be installed on either side of the display for added convenience. Alternatively, you can place the control knob anywhere else within the vehicle and for custom installation professionals the mounting possibilities are virtually endless. Rotation of the knob controls the unit volume output, while a push of the knob will cycle through your vehicles safety cameras on screen. Advanced Sound Tuning Alpine sound quality performance is of the highest standards and with advanced sound tuning you are empowered with the tools to tune your system to perfection, as well as to the specific environment of your vehicle. Featuring a 56-band Parametric EQ in the advanced mode, a 2-way digital crossover, 6-channel digital time correction, plus several Bass Engine SQ and MediaXpander settings provides sound tuning for simple to comprehensive high-end systems with multiple power amplifiers, speakers and subwoofers. 2 x USB Connections The two rear USB ports allow for even greater flexibility. USB port 1 provides fast charging of your smartphone while using wireless connectivity, or you can connect your smartphone for wired connection of Apple CarPlay and Android Auto. Either USB Port 1 or 2 are your entertainment gateway, allowing audio and video playback via connection of a memory stick, portable drive or SSD. DAB+ Digital Radio  DAB+ provides you with a range of quality digital only stations that you can search by station name and genres. DAB+ offers a variety of stations with music eras and types, as well as talkback stations. DAB+ displays station info and music metadata, offers clearer sound and improved reception, achieving a noise free, crystal clear radio listening experience. Hi-Res Audio Certified with USB and Wireless Connectivity Audiophile and music fans can now enjoy a true high-fidelity audio experience with the astonishing detail and musical beauty of Hi-Res Audio. The iLX-F509A supports up to 192kHz/24Bit FLAC/WAV and APE high-resolution audio files with their intended playback specification of 96kHz/24Bit. This means, no longer do you have to compromise your listening experience lost in highly-compressed traditional audio formats, in Hi-Res your music now comes alive with stunning clarity and every nuance revealed, just as the artist intended. When playing Hi-Res Audio files the iLX-F509A will display the Hi-Res icon and file bit rate. Even more impressive, equipped with Hi-Res Audio Wireless and LDAC technology, you can connect your smartphone via USB or wirelessly and use Hi-Res Audio streaming services or apps bringing a virtually limitless music library with the purest sound right inside your car. HDMI Connectivity  HDMI enables connectivity to a number of different devices including smartphone mirroring—making audio and video playback possible in high-definition through the 9” display for virtually limitless entertainment. Built-In Bluetooth  Built-in Bluetooth enables wireless connection of a mobile phone for the convenience and safety of hands free phone and audio streaming. Plus, you can use voice control through the external microphone included. CAN-UART Compatibility CAN-UART capability provides connection to a vehicle specific interface for display of climate information, park assist and steering wheel controls. In addition, system information can be sent to vehicle sub-displays. Check with your Alpine Dealer for compatible vehicles and interfaces. Four Camera Input  The iLX-F509A provides the opportunity to add a reverse and either front or side camera directly to the unit itself. Those with a need for even more visibility requirements now have the ability to increase to a whopping 4 camera’s through the KCX-C250MC Multi-Camera Selector Interface (sold separately). All connected camera’s can be toggled directly from the camera screen, allowing a commanding view of any potential obstacles around your vehicle. Precisely Adjustable Display Angle The iLX-F509A provides even greater installation flexibility. At anytime you can set the display angle in between +45 degrees to -20 degrees to specifically suit the dashboard and your desired viewing position. Also, if need be you can set your desired angle on the fly to mitigate glare in certain conditions. Adjustable Display Height Positioning of the display in the dashboard is crucial for aesthetics and function. The display height can be adjusted +/- 3cm above or below from the centre position, allowing installation into virtually any dashboard with a 1 or 2 DIN slot. You can also adjust the distance of the display to your dash with a 20mm range. 1-DIN Blanking Plates for 2-DIN Installation (Optional) The KAE-1DT and KAE-1DB (optional) blanking plates makes any 2-DIN installation a breeze with a professional finish. These plates fill the void of the 1-DIN space either at the top or underneath when using a conventional 2-DIN dash fascia installation kit. 1-DIN Blanking Plate Fitment (Optional) The KAE-1DT and KAE-1DB are securely fitted to either the top or bottom of the iLX-F509A chassis, allowing the space to be filled regardless of if the unit is installed higher or lower in the dash. Secured by machine thread screws makes installation of the blanking plate simple and robust. Features Radio / DAB Tuner Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12) Memory: Auto Memory Seek Mode: Local, DX, Pre-Set, Service RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT DAB+/DMB Supported DAB+ Slideshow Service DLS (Dynamic Label Service) DAB Service Following RDS Fallback (where available) Auto Ensemble/Service Memory Service Search Function PTY Search Function Alphabet Search Function BLUETOOTH® Built-in BLUETOOTH® Module V4.2 HFP (Hands-Free Profile) Compatible A2DP (Advanced Audio Distribution Profile) Compatible AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible Phone Book Synchronisation Speed Dial: 4 Preset Memory (per phone) Call History Display: Outgoing Calls / Incoming Calls / Missed Calls Redial Function Speech Volume Level Adjustment: (Outgoing and Incoming) 24 Menu Languages Microphone Included Works with iPhone® Compatible with iPhones featuring a lightning connector Various search functions and Album Artwork Display Battery Charging Connectivity Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone) Works with Android Auto wirelessly (requires Android Auto enabled handset)   **Not all handsets supported and may require wired connection. Navigation Function Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps Includes GPS / Glonass enabled navigation antenna USB Media Connection 2x USB cable included USB port 1: data port / USB port 2: charging port Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible Video Playback: MP4, MOV, FLV, MKV compatible Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2 Various search functions included Sound Tuning Bass Engine SQ and Bass Engine PRO sound tuning Subwoofer Level Adjustment 4 V PreOut 10 Equalizer PreSets 13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer 6-Channel Digital Time Correction 2-way Digital Crossover Independent Source Volume Level Setting General 4x 50 Watts Class-D High Power Amplifier 9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p) Display angle adjustable after installation 3 PreOuts (4 V, Front / Rear / Subwoofer) 1 A/V AUX Input (3.5 mm micro jack) 1 HDMI input / 1 HDMI output 2 USB Ports (1x USB data port / 1x USB charging) Steering Wheel Remote Control Ready Vehicle Display Interface Ready (UART connection) Remote Control Ready 2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box Camera Distance Guides (adjustable) Live Contrast Adjustment Menu Language: 24 Languages Auto Dimmer Anti-theft security code Engine Start-Stop unaffected 3-Year Warranty when installed by Authorised Alpine Dealer Specifications General Power Requirement – 14.4V DC (11-16V allowable) Operating Temperature – -20°C to +60°C Power Output – 50W x 4 Maximum Current Consumption – 15A Audio Output Level Preout (Front, Rear): 4V/10k ohms (max.) Preout (Subwoofer): 4V/10k ohms (max.) Weight 2.3kg Screen Screen Size: 9 inch Laminated WXGA LCD Type: Transparent Type TN LCD Operation System: TFT Active Matrix Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3) Illumination System: White LED Backlighting Effective Number of Picture Elements: 99.99% Colour System: NTSC, PAL FM Tuner Tuning Range –   87.5 -105MHz Mono Usable Sensitivity –   8.1 dBf (0.7μV/75 ohms) 50dB Quieting Sensitivity –   12dBf (1.1μV/75 ohms) Alternate Channel Selectivity –  80dB Signal-to-Noise Ratio –  65dB Stereo Seperation –  35dB AM Tuner Tuning Range –   531-1701 kHz Usable Sensitivity –  25.1μV/28 dBf DAB Tuner Tuning Range –   174 – 240 MHz Usable Sensitivity –   -100dBm Signal-to-Noise Ratio – 90dB USB (1) USB Requirements: USB 2.0 Max. Power Consumption: 2,400 mA (CDP Support) USB Class: Mass Storage Class, Play From Device File System: FAT 16/32, exFAT MP3 Decoding: MPEG-1/2 AUDIO Layer-3 WMA Decoding: Windows Media™ Audio AAC Decoding: ACC-LC format ′′.m4a′′ file FLAC Decoding Number of Channels: 2-Channel (Stereo) Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate Total Harmonic Distortion (at 1kHz): 0.005% DynamicRange(at 1kHz): 95 dB Signal-to-Noise Ratio: 95 dB Channel Separation (at 1kHz): 90 dB USB (2) USB Class: Charge Only Max. Power Consumption: 1,500 mA (CDP Support) BLUETOOTH® BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz) Output Power: +4 dBm/2.51 mW Ave. (Power Class 2) HFP: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone Book Access Profile) HSP (Head Set Profile) A2DP: A2DP (Advanced Audio Distribution Profile) AVRCP: AVRCP (Audio/Video Remote Control Profile) SPP (Serial Port Profile) HDMI Section Input Format: 720p/480p/VGA Output Format: 720p/480p GPS Reception Frequency 1575.42 +/- 1.023 MHz Reception Sensitivity (Search) -136dB max. Wi-Fi Frequency Ranges IEEE 802.11 b/g/n (2.4 GHz) IEEE 802.11 a/n/ac (5 GHz) Channels 1 -13 ch (2.4 GHz) 149 – 165 ch (5GHz) Security Protocols WPA3/WPA2-PSK (TKIP, AES) Dimensions Din Size: 1DIN chassis and 9” Capacitive Touch Screen Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7 Specifications Features General Apple CarPlay: Siri Voice Control, Apple Music, Spotify, iHeart Radio, Apple Maps*, Phone Calls, iMessages, Music (*Please check Apple Map availability at Apple official website.) Android  Auto: Voice command, Google Play Music, Spotify, Google Maps, Messages, Phone Call, Music Power Output: 4 x 50 W High Power Amplifier Advanced Power IC 7″ Capacitive Touch Screen Display White LED Backlighting System 50/50 Split Screen: Left / Right Position Changeable Control Type: Touch, Drag, Flick My Favourites Function High Grade Audiophile Design 3 PreOuts (2 V, Front / Rear / Subwoofer) Steering Wheel Remote Control Function Vehicle Display Interface Ready (UART connection) Remote Control Ready Navigation Guidance Mix Camera Connection & Built-in Controls for Multi-View Cameras Camera Guide Line Adjustment Rearview Camera Display Automatic Boot-up Simple Mode & Info Mode Display Selection Visual EQ Live Contrast Adjustment Menu Language: 24 Languages (for AV / Bluetooth), 29 Languages (Navigation Menu and Voice Guidance) Clock Auto Dimmer Anti-theft security code Firmware Updatable Power Antenna Lead HDMI Input Engine Start-Stop unaffected Ready for optional DVD Player DVE-5300 DAB Tuner DAB+ Tuner Built-in DAB+/DMB Supported DAB+ Slideshow Service DLS (Dynamic Label Service) DAB Service Following RDS Fallback (where available) Service Preset: 18 Preset Memory Auto Ensemble/Service Memory Service Search Function PTY Search Function Alphabet Search Function Antenna Power Supply Selection BLUETOOTH® Built-in BLUETOOTH® Module Wide Band Speech Technology HFP (Hands-Free Profile) Compatible Streaming Music: A2DP (Advanced Audio Distribution Profile) Compatible Streaming Music Control: AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible Advanced BLUETOOTH® Technology Connection: SSP (Simple Secure Pairing) Supported Individual Profile Connection Hands Free Phone and Music Streaming Phone Book: Phone Book Synchronisation Speed Dial: 4 Preset Memory (per phone) Multiple Phone Number Registration: 5 Phone Numbers can be stored for one name Device Name Display Auto Answer Call History Display: Outgoing Calls / Incoming Calls / Missed Calls Redial Function Speech Volume Level Adjustment: Possible for Outgoing and Incoming Volume DTMF (Touch-Tone) Function Signal Strength Indicator Battery Level Indicator Microphone Included Made for iPod® and iPhone® Compatibility for iPod/iPhone: compatible with all models except 1st and 2nd generation iPhone Connection: KCU-471i Required (Sold separately) Music Playback Available Selections: Playlist / Artist / Album /Song / Podcast / Genre / Composer / Audiobook Alphabet Search Artwork Display Direct Up / Down: Playlist / Artist / Album / Genre / Composer M.I.X. (Shuffle) Play: Song, Albums, All Repeat Battery Charging USB Media Connection USB Connection: USB Extension Cable Included Music Playback: FLAC/MP3/WMA/AAC compatible Video Playback: MP4 compatible File / Folder Name Search Tag Info Search Folder Up / Down M.I.X. Random Play Repeat Sound Tuning Bass Engine SQ Bass Engine™ Pro Subwoofer Level Adjustment Subwoofer Phase Select 2 V PreOut Equaliser: Flat, Pops, Rock, News, Jazz, Electrical Dance, Hip Hop, Easy Listening, Country, Classical Dual HD EQ (9-band Parametric Equaliser front/rear) 6 Channel Digital Time Correction Digital Crossover Setting Customised Sound Setting by Car Type MediaXpander HD Application Volume Level Setting Sound Setting Data Download Easy, Step-by-Step Sound Customisation Specifications Screen Screen Size: 7-inch Capacitive WVGA LCD Type: Transparent Type TN LCD Operation System: TFT Active Matrix Number of Picture Elements: 1,152,000 pixels (800 x 3 x 480) Illumination System: White LED Backlighting Effective Number of Picture Elements: 99.99% Colour System: NTSC, PAL Max Power Output Ratings Max Power Output: 4 x 50 W FM Tuner Tuning Range: 87.5 – 108.0 MHz Mono Usable Sensitivity: 8.1 dBf (0.7 µV / 75 ohms) 50dB Quieting Sensitivity: 12 dBf (1.1 µV / 75 ohms) Alternate Channel Selectivity: 80 dB Signal-to-Noise Ratio: 65 dB Stereo Separation: 35 dB Capture Ratio: 2 dB MW(AM) Tuner Tuning Range: 531 – 1,602 kHz Usable Sensitivity (IEC Standard): 25.1 µV / 28 dBf LW Tuner Tuning Range: 153 – 281 kHz Usable Sensitivity (IEC Standard): 31.6 µV / 30 dBf USB USB Requirements: USB 2.0 Max. Power Consumption: 1,500 mA (CDP Support) USB Class: Mass Storage Class, Play From Device File System: FAT 16/32 MP3 Decoding: MPEG-1/2 AUDIO Layer-3 WMA Decoding: Windows Media™ Audio AAC Decoding: ACC-LC format ′′.m4a′′ file FLAC Decoding Number of Channels: 2-Channel (Stereo) Frequency Response: 5 – 20k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate Total Harmonic Distortion (at 1kHz): 0.008% DynamicRange(at 1kHz): 95 dB Signal-to-Noise Ratio: 100 dB Channel Separation (at 1kHz): 85 dB GPS/Glonass GPS / Glonass compatible navigation antenna included BLUETOOTH® BLUETOOTH® Version: Bluetooth V2.1+EDR Output Power: +4 dBm Max. (Power class 2) HFP: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone Book Access Profile) HSP (Head Set Profile) A2DP: A2DP (Advanced Audio Distribution Profile) AVRCP: AVRCP (Audio/Video Remote Control Profile) SPP (Serial Port Profile) Sound Tuning Subwoofer Level Adjustment: 0 to +15 Subwoofer Phase Setting: 0° or 180° BASS ENGINE SQ: 5Mode, Level 0 to +6 HighPassFilter: 20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 Hz HighPassFilter (Slope): Off / -6 / -12 / -18 / -24 dB/oct. HighPassFilter (Gain): -12 to 0 dB LowPassFilter: 20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 Hz LowPassFilter (Slope): Off / -6 / -12 / -18 / -24 dB/oct. LowPassFilter (Gain): -12 to 0 dB Time Correction: 0.0 – 9.9ms (0.1ms step) Dual HD EQ Front + Rear Parametric Equalizer (Band 1): 20 – 100 Hz Parametric Equalizer (Band 2): 63 – 315 Hz Parametric Equalizer (Band 3): 125 – 500 Hz Parametric Equalizer (Band 4): 250 – 1k Hz Parametric Equalizer (Band 5): 500 – 2k Hz Parametric Equalizer (Band 6): 1k – 4k Hz Parametric Equalizer (Band 7): 2k – 7.2k Hz Parametric Equalizer (Band 8): 5.8k – 12k Hz Parametric Equalizer (Band 9): 9k – 20k Hz Parametric Equalizer (Gain): -14 to +14 Application Volume Level Setting: -14 to +14 HDMI Section Input Format 720p/480p/VGA Output Format 480p General Power Requirement: 14.4 V. DC (11-16V allowable) Pre Output Voltage (Before Clipping): 2 V / 10k ohms Dimensions Chassis Size (W x H x D) mm: 178 x 100 x 147 mm Nose size (W x H x D) mm: 171 x 96 x 19 mm

7” High-Res Audio Receiver with Wireless Apple CarPlay / Wireless Android Auto / HDMI / USB / Dual Camera / Bluetooth / Hi-Res Audio Wireless / LDAC / DAB+ – Suitable for VE Commodore Series-1 Commodore Sporting luxury design exclusively engineered for your VE Commodore Series-1Discover the very best in multimedia with Alpine’s 7″ infotainment luxury solution, exclusively designed and engineered for VE Commodore Series-1. Equipped with an exquisite ultra-high-quality WXGA display with 2.7 million individual pixel elements, the iLX-507A showcases life-like images and colour vibrancy to the dashboard to provide you with the most incredible visual entertainment experience. With Apple CarPlay and Android Auto, you have a multitude of smartphone options available. You can get directions with navigation apps, make calls, send and receive messages and listen to music all in a way that allows you to maintain full focus on the road. Using your smartphone apps through the 7″ capacitive display is snap or you activate Siri and Voice Recognition for minimised distraction. Engineered with Hi-Res Audio with LDAC wireless technology, enjoy superb audio fidelity with your favourite high-resolution audio tracks from USB, or streaming services and apps via a smartphone. The iLX-507A is fully compliant to Hi-Res Audio specifications, ensuring your music is reproduced with clarity and authenticity as the artist intended. A world-first innovation, the iLX-507A is equipped with a powerful built-in Class-D amplifier to deliver the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker. For a detailed list of apps that have been CarPlay approved by Apple, head over to their website here: http://www.apple.com/au/ios/carplay/ The 7-Inch Dynamic Drive Assist capacitive display elevates your vehicle interface, giving you smartphone-like and intuitive command of climate settings. Even more thrilling, the sports display mode, provides real-time vehicle information such as speed, tachometer, gear shift, brake and acceleration, oil temperature, voltage and much more, there is even a stop watch letting you capture acceleration and lap times when your out on the track. Making parking easier then ever, the 7″ display shows visual representation of factory installed park sensors when engaged, plus you can add-on an optional Alpine front and rear camera system to the Halo9 9-Inch display. High-Definition Display Alpine’s incredible WXGA display has to be seen to be believed, colours are intensely vibrant and realistic, video motion is ultra-smooth and the image detail is razor sharp. Moreover, with its high-resolution display technology brightness and contrast is truly next level, so no matter the lighting conditions or viewing angle the display reveals incredible clarity and true-to-life colour. Alpine’s new WXGA high definition display is simply stunningly beautiful—bringing a cinematic experience right into your dashboard. Apple CarPlay Wireless or USB No wires, no fuss, just get in and drive with your iPhone wirelessly connected to use Apple CarPlay. Listen to your favourite music apps, make and receive calls or messages, use maps or navigation apps, all at your command via the display or voice control. If you need to charge-up then plug-in your iPhone via USB. Android Auto Wireless or USB The convenience of Android Auto allows a wide-array of applications into the dash of your car. Interact via touch or voice command you can make calls and messages, play music apps and much more. All this, now with wireless connectivity or if you need to charge-up on the go simply connect via the USB port. Smartphone Navigation  Through the incredible Alpine WXGA high-definition display you have the access and convenience of highly accurate navigation, further enhancing the Apple CarPlay and Android Auto and experience. With an array of navigation platforms and apps available, for example Apple Maps, Google Maps, Waze and Sygic you can search and get to your destination with ease. You’ll have voice and visual prompts of turn-by-turn navigation and finding locations is a breeze via the display or using voice control. Furthermore, with the built-in GPS/GLONASS circuit and antenna, as well as vehicle speed pulse sense connectivity ensures your actual vehicle position has pin-point accuracy on the road. This keeps you on route when driving through complex and dense city road systems, tunnels, bridges and elevated mountain highways and terrains. Spotify Access the worlds music library with millions of tracks and episodes available on Spotify. When using Apple CarPlay or Android Auto with the Spotify app, you can play the latest songs from your favourite artists, charts and playlists. Plus, browse through the collections of friends, artists, celebrities and radio stations all from the comfort of the driver’s seat. All this, without a single physical connection thanks to the added convenience of Wireless Apple CarPlay and Android Auto. Audio Streaming Apps With Apple Music onboard for Apple CarPlay you have access to 60+ million ad-free songs at your fingertips which you can search genres, artists, podcasts and expertly crafted playlists. With the use of Apple CarPlay or Android Auto, Amazon Music and YouTube Music provides limitless entertainment to stream or download songs from a list of over 40 million ad-free tracks. Amazon Music, YouTube Music and Apple Music are paid subscriptions. Tidal Built-In With TIDAL built-in, stream all your favourite artists wirelessly in incredible master-quality definition. Providing you exclusive access to high-profile music and original content—experience a more intimate connection with music creators through intuitive playlist curation and ability to save your favourite albums, tracks or playlists to the preset menu for quick access. Furthermore, MQA Studio playback ensures absolute audio authenticity, exactly to the artists original recording. Never before seen in car audio, TIDAL’s wireless Hi-Res audio streaming is a must for the modern audiophile. Built-in Class-D Amplifier An industry world first, the iLX-507A is equipped with Class-D amplifier technology producing a massive 50 x 4 Watts of power, delivering the best sound quality and dynamics from high-resolution music. Class-D amplifiers are known to be highly efficient and capable of beautiful high-end sound reproduction with significantly reduced noise and phase shift. What’s more, new ultra-high-spec fans and internal heat sinks direct and dissipate any unwanted heat, ensuring optimum temperature control and audio performance. External Control Knob (RUE-BK01A sold separately) The RUE-BK01A external control knob (sold separately) connects wirelessly to the iLX-507A via Bluetooth. The RUE-BK01A includes mounting hardware for installation to compatible Alpine Halo head units or securing to the dashboard by an installation technician. Alternatively, for custom installation professionals the mounting possibilities are virtually endless. Rotation of the knob controls the unit volume output, while a push of the knob will cycle through your vehicles safety cameras on screen.   Advanced Sound Tuning Alpine sound quality performance is of the highest standards and with advanced sound tuning you are empowered with the tools to tune your system to perfection, as well as to the specific environment of your vehicle. Featuring a 56-band Parametric EQ in the advanced mode, a 2-way digital crossover, 6-channel digital time correction, plus several Bass Engine SQ and MediaXpander settings provides sound tuning for simple to comprehensive high-end systems with multiple power amplifiers, speakers and subwoofers. 2 x USB Connections The two rear USB ports allow for even greater flexibility. USB port 1 provides fast charging of your smartphone while using wireless connectivity, or you can connect your smartphone for wired connection of Apple CarPlay and Android Auto. Either USB Port 1 or 2 are your entertainment gateway, allowing audio and video playback via connection of a memory stick, portable drive or SSD. DAB+ Digital Radio  DAB+ provides you with a range of quality digital only stations that you can search by station name and genres. DAB+ offers a variety of stations with music eras and types, as well as talkback stations. DAB+ displays station info and music metadata, offers clearer sound and improved reception, achieving a noise free, crystal clear radio listening experience. Hi-Res Audio Certified with USB and Wireless Connectivity Audiophile and music fans can now enjoy a true high-fidelity audio experience with the astonishing detail and musical beauty of Hi-Res Audio. The iLX-507A supports up to 192kHz/24Bit FLAC/WAV and APE high-resolution audio files with their intended playback specification of 96kHz/24Bit. This means, no longer do you have to compromise your listening experience lost in highly-compressed traditional audio formats, in Hi-Res your music now comes alive with stunning clarity and every nuance revealed, just as the artist intended. When playing Hi-Res Audio files the iLX-507A will display the Hi-Res icon and file bit rate. Even more impressive, equipped with Hi-Res Audio Wireless and LDAC technology, you can connect your smartphone via USB or wirelessly and use Hi-Res Audio streaming services or apps bringing a virtually limitless music library with the purest sound right inside your car. HDMI Connectivity  HDMI enables connectivity to a number of different devices including smartphone mirroring—making audio and video playback possible in high-definition through the 9” display for virtually limitless entertainment. Built-In Bluetooth  Built-in Bluetooth enables wireless connection of a mobile phone for the convenience and safety of hands free phone and audio streaming. Plus, you can use voice control through the external microphone included. CAN-UART Compatibility CAN-UART capability provides connection to a vehicle specific interface for display of climate information, park assist and steering wheel controls. In addition, system information can be sent to vehicle sub-displays. Check with your Alpine Dealer for compatible vehicles and interfaces. Four Camera Input  The iLX-507A provides the opportunity to add a reverse and either front or side camera directly to the unit itself. Those with a need for even more visibility requirements now have the ability to increase to a whopping 4 camera’s through the KCX-C250MC Multi-Camera Selector Interface (sold separately). All connected camera’s can be toggled directly from the camera screen, allowing a commanding view of any potential obstacles around your vehicle. Features Radio / DAB Tuner Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12) Memory: Auto Memory Seek Mode: Local, DX, Pre-Set, Service RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT DAB+/DMB Supported DAB+ Slideshow Service DLS (Dynamic Label Service) DAB Service Following RDS Fallback (where available) Auto Ensemble/Service Memory Service Search Function PTY Search Function Alphabet Search Function BLUETOOTH® Built-in BLUETOOTH® Module V4.2 HFP (Hands-Free Profile) Compatible A2DP (Advanced Audio Distribution Profile) Compatible AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible Phone Book Synchronisation Speed Dial: 4 Preset Memory (per phone) Call History Display: Outgoing Calls / Incoming Calls / Missed Calls Redial Function Speech Volume Level Adjustment: (Outgoing and Incoming) 24 Menu Languages Microphone Included Works with iPhone® Compatible with iPhones featuring a lightning connector Various search functions and Album Artwork Display Battery Charging Connectivity Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone) Works with Android Auto wirelessly (requires Android Auto enabled handset)   **Not all handsets supported and may require wired connection. Navigation Function Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps Includes GPS / Glonass enabled navigation antenna USB Media Connection 2x USB cable included USB port 1: data port / USB port 2: charging port Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible Video Playback: MP4, MOV, FLV, MKV compatible Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2 Various search functions included Sound Tuning Bass Engine SQ and Bass Engine PRO sound tuning Subwoofer Level Adjustment 4 V PreOut 10 Equalizer PreSets 13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer 6-Channel Digital Time Correction 2-way Digital Crossover Independent Source Volume Level Setting General 4x 50 Watts Class-D High Power Amplifier 7-inch Capacitive Touch-Screen WXGA Display (1280 x 720p) Display angle adjustable after installation 3 PreOuts (4 V, Front / Rear / Subwoofer) 1 A/V AUX Input (3.5 mm micro jack) 1 HDMI input / 1 HDMI output 2 USB Ports (1x USB data port / 1x USB charging) Steering Wheel Remote Control Ready Vehicle Display Interface Ready (UART connection) Remote Control Ready 2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box Camera Distance Guides (adjustable) Live Contrast Adjustment Menu Language: 24 Languages Auto Dimmer Anti-theft security code Engine Start-Stop unaffected 3-Year Warranty when installed by Authorised Alpine Dealer Specifications General Power Requirement – 14.4V DC (11-16V allowable) Operating Temperature – -20°C to +60°C Power Output – 50W x 4 Maximum Current Consumption – 15A *Climate control display is not supported for A/C models Audio Output Level Preout (Front, Rear): 4V/10k ohms (max.) Preout (Subwoofer): 4V/10k ohms (max.) Weight 2.3kg Screen Screen Size: 7 inch WXGA LCD Type: Transparent Type TN LCD Operation System: TFT Active Matrix Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3) Illumination System: White LED Backlighting Effective Number of Picture Elements: 99.99% Colour System: NTSC, PAL FM Tuner Tuning Range –   87.5 -105MHz Mono Usable Sensitivity –   8.1 dBf (0.7μV/75 ohms) 50dB Quieting Sensitivity –   12dBf (1.1μV/75 ohms) Alternate Channel Selectivity –  80dB Signal-to-Noise Ratio –  65dB Stereo Seperation –  35dB AM Tuner Tuning Range –   531-1701 kHz Usable Sensitivity –  25.1μV/28 dBf DAB Tuner Tuning Range –   174 – 240 MHz Usable Sensitivity –   -100dBm Signal-to-Noise Ratio – 90dB USB (1) USB Requirements: USB 2.0 Max. Power Consumption: 2,400 mA (CDP Support) USB Class: Mass Storage Class, Play From Device File System: FAT 16/32, exFAT MP3 Decoding: MPEG-1/2 AUDIO Layer-3 WMA Decoding: Windows Media™ Audio AAC Decoding: ACC-LC format ′′.m4a′′ file FLAC Decoding Number of Channels: 2-Channel (Stereo) Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate Total Harmonic Distortion (at 1kHz): 0.005% DynamicRange(at 1kHz): 95 dB Signal-to-Noise Ratio: 95 dB Channel Separation (at 1kHz): 90 dB USB (2) USB Class: Charge Only Max. Power Consumption: 1,500 mA (CDP Support) BLUETOOTH® BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz) Output Power: +4 dBm/2.51 mW Ave. (Power Class 2) HFP: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone Book Access Profile) HSP (Head Set Profile) A2DP: A2DP (Advanced Audio Distribution Profile) AVRCP: AVRCP (Audio/Video Remote Control Profile) SPP (Serial Port Profile) HDMI Section Input Format: 720p/480p/VGA Output Format: 720p/480p GPS Reception Frequency 1575.42 +/- 1.023 MHz Reception Sensitivity (Search) -136dB max. Wi-Fi Frequency Ranges IEEE 802.11 b/g/n (2.4 GHz) IEEE 802.11 a/n/ac (5 GHz) Channels 1 -13 ch (2.4 GHz) 149 – 165 ch (5GHz) Security Protocols WPA3/WPA2-PSK (TKIP, AES) Dimensions Din Size: 1DIN chassis and 7” Capacitive Touch Screen Chassis Size (W x H x D) mm: 178 x 50 x 149.6 Display Size (W x H x D) mm: 171 x 96 x 17.7 (VES1G4-507A)

Alpine R2-Series Premium Speaker System – FORD RANGER PXII / PXIII (Front & Rear) Upgrade your Ford Ranger with powerful, high-resolution sound. The Alpine R2-Series Premium Speaker System is a direct-fit upgrade designed to deliver deep bass, crystal-clear highs, and true Hi-Fi performance — all without modifying your vehicle. Built specifically for the FORD RANGER PXII and PXIII, this complete front and rear speaker system transforms your in-car audio with premium materials, advanced engineering, and seamless integration. Key Benefits Direct-fit upgrade for FORD RANGER PXII / PXIII Complete front and rear speaker system Plug-and-play installation — no cutting or soldering required High-resolution audio with extended frequency response up to 40kHz Enhanced bass performance with larger magnet structure Premium tweeter housing for improved sound staging and interior aesthetics Vehicle Fitment FORD | RANGER | PXII / PXIII Direct Fit Integration Designed specifically for the Ford Ranger, this system integrates seamlessly with factory mounting points and wiring. All components are pre-assembled with plug-and-play connections, allowing for a straightforward installation with no modifications required. Premium Tweeter System 1” magnesium hard-dome tweeters for ultra-clear sound Hi-Res Audio certified with response up to 40kHz Swivel design to optimise sound direction and staging Custom A-pillar housing with premium Alpine finish Powerful Woofer Performance Glass-fibre reinforced cone for fast, accurate response Larger magnet structure for deeper, stronger bass HAMR surround for increased cone movement and output Shallow mounting design for easy installation Advanced Audio Engineering Dual gap voice coil for improved clarity and linearity High-quality in-line crossover network included Adjustable tweeter levels (-3dB / 0dB / +3dB) Bi-amp ready design for advanced setups Specifications Peak Power: 300W RMS Power: 100W Impedance: 4 Ohms Frequency Response: 65Hz – 40kHz Woofer Size: 16.5 cm (6.5") Mounting Depth: 5.9 cm Magnet: Neodymium Why Choose Alpine R2-Series Engineered specifically for vehicle-specific fitment Premium materials for superior sound quality Designed for both performance and aesthetics Trusted Alpine audio engineering FAQs Is this a direct fit for my Ranger?Yes, it is designed specifically for FORD RANGER PXII and PXIII models. Do I need to modify wiring?No, it features plug-and-play connections with no cutting or soldering required. Does this include both front and rear speakers?Yes, this is a complete front and rear speaker upgrade system. Will this improve bass performance?Yes, the upgraded magnet structure and HAMR surround provide significantly improved bass output. Upgrade Your Ranger’s Sound System Experience premium audio performance with a system designed specifically for your vehicle. The Alpine R2-Series delivers clarity, power, and precision in every drive.

The VIBE BlackDeath Pro-8 8" Pro Audio Car Speaker is built for extreme sound performance, delivering high SPL output, aggressive mid-bass, and competition-level volume. Designed using professional PA speaker technology, this 8 inch woofer is ideal for loud car audio systems, SPL builds, and enthusiasts who demand powerful and clear sound at high volumes. Engineered for maximum efficiency, the semi-pressed paper cone provides high sensitivity with low moving mass, allowing the speaker to produce incredibly loud output with minimal power. The dual roll cloth surround ensures fast and precise cone control, delivering tight bass response and strong midrange clarity even under heavy load. Featuring the signature BlackHole dustcap, this speaker increases effective cone area to maximise sound pressure levels, producing extreme volume with clarity and control. Perfect for competition setups, custom builds, or upgrading your car speaker system, the BlackDeath Pro-8 offers durability, performance, and unmatched output. Specifications Speaker Type: Pro Audio Component Woofer Speaker Size: 8" (203mm) Peak Power: 600W RMS Power: 200W Minimum Input: 100W Sensitivity: 93 dB Frequency Response: 65 Hz – 7.5 kHz Impedance: 4 Ohm Mounting Depth: 85mm (3.4") Mounting Diameter: 185mm (7.3") Voice Coil Diameter: 44mm (1.7") Magnet Weight: 40 oz Unit: Sold as Single Speaker

The VIBE 4 AWG Amplifier Wiring Kit is a complete solution for installing your car amplifier or subwoofer system, delivering reliable power transfer and easy installation. Designed for performance and value, this kit includes everything needed to get your audio system up and running efficiently. Built with high-quality CCA (Copper Clad Aluminium) wiring, the kit provides consistent power delivery while remaining lightweight and flexible for installation. The included RCA interconnect and remote turn-on cable ensure clean signal transmission, while the speaker cables support strong and clear audio output. Perfect for car audio upgrades, amplifier installations, and subwoofer setups, this all-in-one wiring kit simplifies the installation process while maintaining dependable performance and durability. Specifications Product Type: Amplifier / Passive Enclosure Wiring Kit Cable Gauge: 4 AWG Material: CCA (Copper Clad Aluminium) Power Cable Length: 5m Ground Cable Length: 1m RCA Interconnect Length: 5m Remote Turn-On Cable Length: 5m Speaker Cable: 2 x 5m Flat 16 AWG Fuse: 60 Amp with Fuse Holder Terminals: 2 x Spade Terminals Accessories: 6 x Cable Ties

This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. GENERAL SPECIFICATIONS: Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle Steel mesh grilles are included to protect the subwoofer drivers Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 – 500W Nominal Impedance: 2 Ω Continuous Power Handling (RMS) 500 W Enclosure Type Slot-ported, Low-profile External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm

Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω - 14.4V Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD1000/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD1000/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.] Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 600 W RMS x 1 @ 3 Ω 800 W RMS x 1 @ 2 Ω 1000 W RMS x 1 @ 1.5 Ω N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 500 W RMS x 1 @ 3 Ω 650 W RMS x 1 @ 2 Ω 800 W RMS x 1 @ 1.5 Ω N/A   General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered   Physical Specifications Height (H) 2.10 in / 53 mm Width (W) 11.40 in / 290 mm Depth (D) 7.50 in / 190 mm Net Weight

Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 4D amplifier is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results. General Specs Channels 4 - 2 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 1 x 15 A Idling current (power ON/OFF) 1.2 A / 0.04 mA Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 15 A Remote In: 4 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-On/Off AMPLIFIER STAGE Distorsion - THD (100 Hz @ 4Ω) 0.2 % Bandwidth: 10 ÷ 30K Hz S/N Ratio (A weighted @ 1 V): 95 dB Damping factor (100 Hz @ 4Ω) 45 Pre-In sensitivity: LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V Load impedance (MIN)@ 4 Ch:@ 2 Ch: 2Ω4Ω Max size (mm/in): 223 x 100,5 x 43,6 / 8.77 x 3.95 x 1.71 Weight (kg/lb): 1.35 / 2.97 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 4 Ch 50 W x 4 (4 Ω) 4 Ch 65 W x 4 (2 Ω) 3 Ch 50 W x 2 (4 Ω) + 130 W x 1 (4 Ω) 3 Ch 65 W x 2 (2 Ω) + 130 W x 1 (4 Ω) 2 Ch 130 W x 2 (4 Ω) OUTPUT POWER (RMS) @ 14.4 VDC, THD 10%: 4 Ch 60 W x 4 (4 Ω) 4 Ch 75 W x 4 (2 Ω) 3 Ch 60 W x 2 (4 Ω) + 150 W x 1 (4 Ω) 3 Ch 75 W x 2 (2 Ω) + 150 W x 1 (4 Ω) 2 Ch 150 W x 2 (4 Ω) Total Power 600 W INPUTS / FILTERS Inputs: PRE IN FRONT Ch. filters FULL: Yes Lo-Pass: 65-85-115 Hz @ 12 dB/Oct REAR Ch. filters FULL Yes Hi-Pass: 65-85-115 Hz @ 12 dB/Oct Lo-Pass: 65-85-115 Hz @ 12 dB/Oct. Physical Specs mm in A 223 8.78 B 207 8.15 C 100,5 3.96 D 76 2.99 E 43,6 1.72

Hertz MPS 250 S2 shallow subwoofer has been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.MPS 250 is optimized to work in ultra-compact sealed boxesstarting from only 14 Lt (0.49 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space - and the height - are limited.Mille PRO shallow subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.

The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening. Component Coaxials Size mm (in.) (6 x 9) Power Handling - Continuous W 130 Power Handling - Peak W 260 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Frequency Response Hz 30 ÷ 24k Woofer Magnet size D x d x h mm (in.) 107 x 45 x 20 (4.21 x 1.77 x 0.79) Weight of one speaker kg (lb.) 2.28 (5.03) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-pulp cone with cotton fibers Dome Tetolon Xmech mm (in.) ±8 (0.31) D mm 169 Re Ohm 3 Fs Hz 50 Le mH 0,07 Vas I 24 Mms g 30 Cms mm/N 0,34 BL T*m 7,2 Qts 0,43 Qes 0,55 Qms 2 Spl dB 94 A 241 mm 9.49 in. B 223 mm 8.74 in. C 108 mm 4.25 in. D 90 mm 3.54 in. E 267 mm 10.53 in. F 38,5 mm 1.52 in.

The  coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers  allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies. 1. CONCENTRIC COAXIAL TWEETER: built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.2. TWEETER SUPPORT WORKING AS A REAR CHAMBER: sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.3. 36 MM PURE COPPER WOOFER VOICE COIL: wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.4. PRESSED-PULP CONE WITH COTTON FIBERS: combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.5. “BOUNDARY FREE” RUBBER SURROUND: for improved efficiency and wider midbass frequency. (Logo Boundary Free)6. OVER-SIZED FERRITE MAGNET: combined with very low carbon content iron plates, for low distortion at high power levels.7. BASKET: low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.8. ANTI-VIBRATION RUBBER MAGNET COVER: to damp spurious vibrations. Component Coaxials Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 36 (1.42) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 21,5k Woofer Magnet size D x d x h mm (in.) 90 x 45 x 17 (3.54 x 1.77 x 0.67) Tweeter Magnet size D x h mm (in.) 29.5 x 22 x 4 (1.16 x 0.87 x 0.16) Weight of one speaker kg (lb.) 1.27 (2.8) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-pulp cone with cotton fibers Dome Tetolon Xmech mm (in.) ±6 (0.24) D mm 132 Re Ohm 3,1 Fs Hz 90 Le mH 0,01 Vas I 4 Mms g 18,9 Cms mm/N 0,15 BL T*m 5,8 Qts 0,88 Qes 1,06 Qms 5,5 Spl dB 92 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74 mm 2.91 in. D 62,6 mm 2.46 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.

The MP 165P.3 car audio woofers electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.   Component Woofer Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 3 Voice Coil Ø 25 (1) Frequency Response Hz 45 ÷ 4,5k Magnet size D x d x h mm (in.) 95 x 45 x 17 (3.74 x 1.77 x 0.67) Weight of one speaker kg (lb.) 1.2 (2.65) Magnet High density flux ferrite Cone Pressed-pulp cone with cotton fibers Xmech mm (in.) ±7.5 (0.3) D mm 132 Re Ohm 2,6 Fs Hz 75 Le mH 0,28 Vas I 8 Mms g 15,1 Cms mm/N 0,3 BL T*m 5,45 Qts 0,56 Qes 0,63 Qms 5,2 Spl dB 94 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74,5 mm 2.93 in. D 64 mm 2.52 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.

Focal Inside Ford Ranger PX1, PX2 & PX3 6.0 Audio Upgrade Pack Transform the factory audio system in your Ford Ranger PX Series with the Focal Inside Ford Ranger PX1/PX2/PX3 6.0 Pack. This complete Plug & Play audio upgrade combines premium Focal speakers, a compact digital amplifier, and vehicle-specific integration harnesses to deliver exceptional sound quality, improved clarity, and greater listening enjoyment without compromising your vehicle's factory appearance. Designed specifically for Ford Ranger PX Series 1, 2, and 3 models, this package upgrades both front and rear speakers while adding dedicated amplification for greater control, power, and dynamic performance. The result is clearer vocals, improved bass response, enhanced detail, and a more immersive listening experience whether you're commuting, touring, or heading off-road. Using Focal's renowned Polyglass cone technology and aluminium inverted dome tweeters, the speaker upgrades provide accurate sound reproduction and excellent musical detail. The included Focal Impulse 4.320 amplifier ensures the speakers perform to their full potential, delivering clean power and improved system headroom. Key Features Complete Plug & Play audio upgrade package for Ford Ranger PX1, PX2 and PX3 Upgrades front and rear factory speakers Includes dedicated Focal compact digital amplifier Vehicle-specific Ford integration harnesses included No cutting, soldering or major modifications required on compatible vehicles Improved clarity, soundstage, bass response and overall audio quality Maintains factory appearance and OEM functionality Designed for factory head unit integration Ideal for daily drivers, touring vehicles and 4WD builds Vehicle Compatibility Ford Ranger PX Series 1 Ford Ranger PX Series 2 Ford Ranger PX Series 3 What's Included IS FORD 165 – Front 2-Way Component Speaker Kit IC FORD 165 – Rear 2-Way Coaxial Speaker Kit Impulse 4.320 – Compact Digital Amplifier IW-FORDV2-YISO – Ford-Specific Y-ISO Integration Harness IMP EXTENSION I/O 150 – Amplifier Extension Harness IW-PWSUP600 – Amplifier Power Supply Cable Pack Benefits Enhanced front-stage clarity and vocal definition Improved rear cabin audio performance Greater amplifier control and speaker efficiency Stronger bass response and dynamic range Cleaner sound at higher listening volumes Balanced sound throughout the vehicle cabin OEM-style installation with minimal vehicle modification Why Upgrade Your Ford Ranger Audio? While the Ford Ranger PX is one of Australia's most popular utes, many owners find the factory sound system lacks the clarity, power, and detail expected from a premium audio experience. The Focal Inside 6.0 Pack addresses these shortcomings by upgrading the key components responsible for overall sound quality. With premium Focal speakers handling front and rear audio duties and a dedicated amplifier providing clean power delivery, this package creates a richer, more detailed listening experience while maintaining factory integration and reliability. Installation Notes Designed for compatible Ford Ranger PX1, PX2 and PX3 vehicles Suitable for factory head units only Not compatible with factory premium amplified audio systems Aftermarket head unit installations may require additional wiring accessories Professional installation recommended Vehicle compatibility should be confirmed before purchase Recommended For Ford Ranger owners seeking improved sound quality Touring and 4WD enthusiasts Daily drivers wanting better clarity and performance Users looking for a complete Plug & Play speaker and amplifier upgrade Customers wanting premium audio without custom fabrication Pack Summary Vehicle Ford Ranger PX1 / PX2 / PX3 Pack Type Powered Speaker Upgrade Pack Front Speakers IS FORD 165 Component Speakers Rear Speakers IC FORD 165 Coaxial Speakers Amplifier Focal Impulse 4.320 Integration Harnesses IW-FORDV2-YISO, IMP EXTENSION I/O 150, IW-PWSUP600 Installation Type Vehicle-Specific Plug & Play

Focal TWU1.5 Aluminium/Magnesium Inverted Dome Tweeters - TWU1.5 Enhance your vehicle's audio system with the Focal TWU1.5 Tweeters, a premium high-frequency upgrade designed to deliver exceptional clarity, detail, and accuracy. Developed and manufactured in France, these compact tweeters feature Focal's renowned aluminium/magnesium inverted dome technology, providing natural treble reproduction and an extended frequency response for a truly immersive listening experience. Part of the acclaimed Focal Integration Series, the TWU1.5 tweeters are engineered for universal compatibility and custom installations. Whether you're upgrading an existing Focal system, enhancing factory speakers, or building a complete custom audio setup, these tweeters offer remarkable flexibility and outstanding acoustic performance. With multiple mounting options and a compact design, the TWU1.5 allows seamless integration into virtually any vehicle while maintaining a clean OEM-style appearance. The result is wider sound dispersion, improved stereo imaging, and greater musical detail across every genre. Key Features Designed and developed in France Aluminium/Magnesium inverted dome tweeter technology Extended 4kHz – 21kHz frequency response 94dB sensitivity for excellent efficiency Four mounting options for maximum installation flexibility Natural, accurate, and detailed sound reproduction Excellent stereo imaging and soundstage enhancement Compatible with factory and aftermarket audio systems Ideal for Focal Integration and Universal Series upgrades Sold as a pair Why Upgrade with TWU1.5 Tweeters? Factory tweeters often lack the detail and precision needed to reproduce high frequencies accurately. The Focal TWU1.5 delivers cleaner vocals, sharper instrument detail, and a wider soundstage, helping reveal nuances in your music that standard speakers can miss. Designed to integrate effortlessly into a variety of vehicle applications, these tweeters provide a significant improvement in overall system performance while maintaining tonal balance and listening comfort. Flexible Mounting Options Flush Mount Installation Angled Surface Mount Installation Flat Surface Mount Installation Behind Factory Grille Integration Benefits Improved vocal clarity and detail Extended high-frequency response Enhanced stereo imaging and soundstage Natural and balanced sound signature Suitable for OEM and aftermarket systems Simple integration into virtually any vehicle Specifications Product Type: Tweeters Tweeter Design: Inverted Dome Tweeter Material: Aluminium/Magnesium RMS Power Handling: 15W RMS Maximum Power Handling: 100W Impedance: 4 Ohm Sensitivity: 94dB Frequency Response: 4kHz – 21kHz Surround Material: Poron Voice Coil Diameter: 0.8" Mounting Type: Surface Mount Grilles Included: Yes Net Weight: 40g More Information Product Type Tweeters Series Focal Integration Tweeter Material Aluminium/Magnesium Tweeter Design Inverted Dome RMS Power 15W Maximum Power 100W Impedance 4 Ohm Sensitivity 94dB Frequency Response 4kHz - 21kHz Surround Material Poron Voice Coil Diameter 0.8" Mounting Type Surface Mount Grilles Included Yes Net Weight 40g Vehicle Compatibility Universal Sold As Pair Country of Design France What's Included 2 x Focal TWU1.5 Tweeters Surface Mount Hardware Flush Mount Hardware Installation Accessories Protective Grilles Installation Instructions

FOCAL TOYOTA SPECIFIC SPEAKERS FOR PERFECT INTEGRATION IS TOY 690 is a two-way component kit with a 6×9’’woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota® models. Reliable, neutral and powerful, the compactness and the ergonomics of the IS TOY 690 makes it easy to integrate thanks to the factory connectors. IS TOY 690 Features Respect of the original Toyota® connectors Better precision in high frequencies Compact tweeter for better adaptation in factory location High-density rubber ring for acoustic sealing with the door panel This kit can be installed in the following car models: Prius Camry Tacoma Tundra FJ Cruiser

The Focal Inside head unit adaptation cable for RENAULT/DACIA Y-ISO HARNESS is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Renault/Dacia original head unit and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 0.9ft (0.3m) Compatibility: for Renault and Dacia vehicles since 2000 

FOCAL BAMXXXL Acoustic Absorption & Sound-dampening Material (Bulk Pack | 0.5mx6m) Soundproof your car Attenuates the speaker back wave Increases the bass level in your car Increases the soundproofing of outside noise This acoustic insulation kit is completing and essential to a quality car audio installation. From its use depends on optimum acoustic rendering of speakers, amplifiers and installed accessories. Technical materials made of honeycombed damping material, an Aluminum sheet and a viscoelastic complex (Butyl). Honeycombed damping material Just like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and thus increases the speaker performance. Aluminium sheet Aluminium provides rigidity to the Butyl/foam couple. This rigidity also permits the easy laying of BAM in difficult locations. Viscoelastic complex Self-adhesive, the Butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car.

Slim fit, full sound Focal's Elite K2 Power Series ES 165 K2S component system is the culmination of Focal's passion for perfect sound. Focal's sound gurus engaged in intensive listening sessions designing this line of speakers so that you enjoy uncanny realism, sweeping dynamics, and breathtaking depth in your music. They also found some ways to make the woofers a little less deep, so they can fit into more vehicles. The system's 2-ohm impedance extracts maximum power from your amp so you'll get more punch from your system. A classic woofer with a twist The 6-1/2" woofer uses Focal's classic "W" sandwich cone design for incredibly accurate audio reproduction. The light foam core is sandwiched between responsive aramid fiber and fiberglass layers, so the woofer has the control needed to play delicate classical passages, yet will handle the power needed to drive your bass-heavy tracks with authority. Focal adds a Tuned Mass Damper (TMD®) butyl rubber surround to minimize harmonic distortion for the cleanest midrange possible. In addition to sweet-sounding tweeters and woofers, this system includes crossovers with adjustments for the tweeter level and crossover slopes. A redesigned tweeter The separate aramid fiber tweeter employs a unique "M"-shaped inverted dome design that disperses the highs with remarkable precision, all the way up to 22,000 Hz. The K2 Power crossovers use hand-made components developed by Focal to deliver an ideal blend of the highs and lows for a dynamic stereo image. They also include controls for a treble boost, a 3-level bass setting, and two crossover slopes — all so you can dial in the sound to your car's environment. Product highlights: component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 external crossovers, and hardware K2 aramid fiber sandwich woofer cone Tuned Mass Damper (TMD®) butyl rubber surround TKME "M"-shaped inverted-dome tweeter made of aramid fiber 2-way external crossover with tweeter, woofer, and crossover slope settings 2-ohm impedance power handling: 70 watts RMS (140 watts peak power) frequency response: 60-22,000 Hz sensitivity: 88 dB at 2.83V woofer top mounting depth: 2.285" woofer and tweeter aluminum grilles included flush- and surface-mount tweeter brackets included warranty: 1 year MFR # ES165K2S Item # 091ES16K2S What's in the box: Two woofers Focal owner's manual Two inverted dome tweeters (with attached 18" length of speaker wire) 2 Crossovers 2 Tweeter flush trim rings (installed) 2 Tweeter angled surface mount cups 2 Dome protective washers 2 Tweeter grilles (installed) 2 Woofer grilles 2 Woofer grille mounting rings 2 Woofer gaskets 8 Speed clips Four 3/4" Screws Eight 1-1/8" Screws Quick start guide 2 Focal window stickers Features & specs General Speaker Size 6 1/2 Design 2-way Tweeter Design M-Shaped Inverted Dome Impedance (Ohms) 2 Tweeter Composition Aramid Fiber Woofer Composition Aramid Fiber/Glass/Kevlar Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 88 Frequency Response 60 - 22k Hz Minimum RMS Wattage --- Maximum RMS Wattage 70 Peak Power Handling (Watts) 140 Top-mount Depth (Inches) 2 5/16 Bottom-mount Depth (Inches) 2 1/2 Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.43 Frame Width 6.49 Frame Length 6.49

Alpine BRV-S40C BassRev 4" 2-Way Component Speakers with HEDGE Surround Technology Experience premium sound quality from a compact speaker upgrade with the Alpine BRV-S40C BassRev 4" 2-Way Component Speaker System. Designed using Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology that delivers enhanced bass performance while preserving the exceptional clarity, detail, and accuracy that Alpine is known for. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S40C produces rich sound with surprising low-frequency performance from a compact speaker format. Ideal for factory speaker replacement applications, these speakers offer a significant upgrade in overall audio quality and listening enjoyment. Key Features 4" (125mm) 2-Way Component Speaker System designed for superior audio performance in compact installations. Exclusive HEDGE Surround Technology increases cone excursion for enhanced bass response. Lightweight Polypropylene Woofer Cone provides rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth and detailed high-frequency reproduction. Large 75mm Strontium Ferrite Magnet Structure improves efficiency and speaker control. 25mm Woofer Voice Coil supports improved power handling and dynamic output. High-Quality Audio-Grade Tweeter Crossover Network for seamless frequency integration. Neodymium Tweeter Magnets ensure precise and articulate treble response. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise speaker excursion while maintaining precise control. The BRV-S40C can achieve up to 20mm of maximum linear excursion, delivering impressive bass performance within the critical 67Hz–120Hz range. This advanced surround design enables deeper bass output, improved punch, and greater sound pressure levels compared to conventional factory speakers, creating a fuller and more engaging listening experience. Lightweight Polypropylene Woofer Cone The BRV-S40C features a specially engineered polypropylene woofer cone that combines lightweight construction with excellent rigidity. This design effectively resists unwanted resonance and vibration, allowing the speaker to maintain clean, balanced sound reproduction even at higher volume levels. The result is improved bass accuracy, enhanced midrange clarity, and lower distortion across the entire frequency range. Large Magnet Structure for Increased Output Built with a large 75mm Strontium Ferrite magnet and oversized 25mm voice coil, the BRV-S40C is designed to maximise speaker control and efficiency. This powerful motor structure works together with Alpine’s HEDGE surround technology to deliver stronger bass response, increased output capability, and greater overall sound performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with exceptional precision. Featuring lightweight polyester diaphragms and powerful Neodymium magnets, the tweeters deliver smooth, natural, and highly detailed high-frequency reproduction. Enjoy wider sound staging, improved imaging, and enhanced musical detail without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S40C tweeters feature removable housings and trim rings that allow compact installation into many factory tweeter locations. Suitable mounting positions include: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexible design allows installers to maintain a factory-style appearance with minimal modification while achieving optimal sound performance. OPTIM™Sync Technology Compatibility The BRV-S40C is compatible with Alpine’s advanced OPTIM™Sync processing when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock deeper bass extension, improved tonal balance, and enhanced overall audio performance. Technical Specifications Model Alpine BRV-S40C Speaker Type 2-Way Component Speaker System Woofer Size 4" (125mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 25mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 75mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 120 Watts RMS Power Handling 40 Watts RMS (CTA-2031 Compliant) Frequency Response 75Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 40W RMS Per Channel Woofer Dimensions Frame Diameter 10.08 cm Cut-Out Diameter 9.5 cm Mounting Depth 4.49 cm Mounting Height 0.69 cm Magnet Diameter 7.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S40C 4" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S40C? Advanced HEDGE surround technology for enhanced bass performance Premium polypropylene woofer cone for accurate sound reproduction Large magnet structure and 25mm voice coil for improved output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design Compatible with Alpine OPTIM™Sync DSP tuning technology Excellent factory speaker replacement solution Legendary Alpine sound quality and reliability The Alpine BRV-S40C BassRev 4" Component Speaker System delivers impressive bass, exceptional clarity, and detailed high-frequency performance in a compact package, making it the perfect upgrade for drivers seeking premium sound quality from factory speaker locations.

Take your off-road exploration further with the AlpineStyle LXR-AM4. Engineered for durability and high-performance, these lights deliver reliable illumination in the harshest conditions. Built with premium OSRAM® LED modules, robust steel alloy housing, and a high-grade LEXAN™ 143R lens, LXR-AM4 ensures maximum clarity, longevity, and confidence on any trail. FEATURES Spotlight Beam Type – Focused illumination for precise long-distance lighting LEXAN™ 143R Polycarbonate Lens – High-impact, UV-resistant, and thermally stable IP68 & IP69K Rated – Dustproof, waterproof, and resistant to high-pressure washes High-Output OSRAM® 5W LED Modules – Uniform light output with 50,000+ hour lifespan Includes Wiring Harness – Waterproof connectors for simple installation Robust 6063 Aluminium Housing – Durable, heat-dissipating body Steel Mounting Hardware Included – Reliable and easy installation Included Protective Lens Covers – Shields lens from debris and environmental wear  SPECIFICATIONS Panel Size: 4-Inch Beam Angle: 120° Raw Lumen Output: 2700 lm 1 Lux Distance: 311 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 19.8W Current Draw: 1.5A @ 13.2V Operating Temperature: -40° ~ 145°C Paint Finish: Dupont

The AP 4 midbass offers very extended frequency response, both in high and low frequencies, combined with high efficiency and features a 25 mm pure copper voice coil to ensure more balance in mid-high frequency ranges. Technical Specs Nominal diameter 100 mm (4 in) Impedance 4 Ohm Power Handling - Peak 120 W Power Handling - Continuous 40 W Sensitivity 91 dB Frequency Response 80 ÷ 7,5k Hz Voice Coil Ø 25 mm Magnet size D x d x h 70 x 32 x 10 mm (2.75 x 1.26 x 0.39 in) Xmax 1.8 mm (0.07 in) Electric-acoustic Specs Re 3.2 Ohm Fs 125 Hz Le 0.16 mH Vas 1.5 l (0.053 ft) Mms 5 g (0.176 oz) Cms 0.3 mm/N BL 3.4 T•m Qts 1 Qes 1,2 Qms 7.6 General Weight 0.4 kg Dimensions Dimension A 103 mm (4.06 in) Dimension A3 130 mm Dimension B 93 mm (3.66 in) Dimension C 43 mm (1.69 in) Dimension D 41 mm (1.61 in)

Next-Generation 12-inch (30cm) R-Series Subwoofer with Dual 4-Ohm Voice Coils The new 2022 R-Series subwoofers are here - drawing from decades of Subwoofer engineering experience. They deliver deep, clean, accurate bass and feature Alpine’s HAMR Surround for maximum cone excursion, delivering tons of bass output. the new ceramic dust cap is very light weight and rigid, keeping distortion an absolute minimum. The new, enlarged motor structure ensures better overall woofer control for a clean, strong bass response. General Sealed: 12″ Frequency Response: 24Hz-200kHz RMS Power Handling: 750W Peak Power Handling: 2250W

Alpine R2-W12D2 2nd Gen Product Details: 12" Dual 2 ohms Alpine Type-R Series Series Subwoofer Power Handling: Peak: 2250 watts RMS: 750 watts Kevlar Reinforced Pulp Paper Cone High-Amplitude Multi-Roll (H.A.M.R) Surround Push-Type Speaker Terminals (Up To 8AWG Wire Size) Oversized Dust Cap 65.5 mm (2.6")" High Temperature Voice coil 20 mm Xmax 127 oz. Double Stacked Ferrite magnet motor structure Frequency Response: 24 - 200 Hz Resonance Frequency (Fs): 29 Hz Sensitivity: 85 dB Sealed box volume: .55 cubic feet Ported box volume: 1.0 cubic feet Top-mount depth: 6-3/8" Cutout diameter: 10.88" CTA-2031 Compliant: Yes

Alpine’s all-new R-Series subwoofers have gained significant engineering refinements that substantially improve the sonic performance of their predecessors. The result is incredible power handling, clean output and deep bass excursion. Beyond their modest aesthetic upgrades, Alpine’s efforts were concentrated on re-engineering the motor and circuit design, crafting a performance sub that offers exceptional sound and resolution, well-exceeding their peers. Painstaking engineering, coupled with decades of expertise in high-end audio design, Alpine’s all-new R-Series continues its unrivalled reputation in benchmark performance and sound quality. Features Dual Gap Voice Coil Rigid Dust Cap Neodymium Magnet High-Amplitude Multi-Roll Surround Heavy-gauge push terminals Peak Power Handling: 2250W RMS Power Handling: 750W Nominal Impedance: 4ohms+4ohms Frequency Response: 24Hz-200kHz Mounting Dimensions: 171.5mm diameter x 149.2mm depth Specifications General Sealed: 10″ Frequency Response: 24Hz-200kHz RMS Power Handling: 750W Peak Power Handling: 2250W Voice Coil Diameter: 65.5 mm (2.6″)

Alpine’s all-new R-Series subwoofers have gained significant engineering refinements that substantially improve sonic performance of their predecessors. The result is incredible power handling, clean output and deep bass excursion. Beyond their modest aesthetic upgrades, Alpine’s efforts were concentrated on re-engineering the motor and circuit design, crafting a performance sub that offers exceptional sound and resolution, well-exceeding their peers. Painstaking engineering, coupled with decades of expertise in high-end audio design, Alpine’s all-new R-Series continues its unrivalled reputation in benchmark performance and sound quality. Features Dual Gap Voice Coil Rigid Dust Cap Neodymium Magnet High-Amplitude Multi-Roll Surround Heavy-gauge push terminals Peak Power Handling: 2250W RMS Power Handling: 750W Nominal Impedance: 2ohms+2ohms Frequency Response: 24Hz-200kHz Mounting Dimensions: 171.5mm diameter x 149.2mm depth Specifications General Sealed: 10″ Frequency Response: 24Hz-200kHz RMS Power Handling: 750W Peak Power Handling: 2250W Voice Coil Diameter: 65.5 mm (2.6″)

The KTP-445U Universal Power Pack amplifies the head unit power output, resulting in up to a 150 percent power increase over the original power from the head unit’s built-in amplifier. Add higher output and more dynamic response with this easy-to-install head unit power upgrade. Features For aftermarket and factory installed systems Compact size 4-channel Amplifier 45 Watts x 4 @ 4Ω/2Ω 90 Watts x 2 @ 4Ω Bridged Fuse: 15A Specifications Power Output Per Channel, Ref: 14.4V, 4ohms, @ < 1% THD+N: 45W RMS x 4 Per Channel, Ref: 14.4V, 2ohms, @ < 1% THD+N: 45W RMS x 4 S/N Ratio IHF A-wtd + AES-17, Ref: 1 W into 4 ohms: 82dB IHF A-wtd + AES-17, Ref: Rated Power into 4 ohms: 98dB Frequency Response +0 / -3 dB, Ref: 1 W into 4 ohms 15Hz – 45kHz Input Impedance > 10k ohms Input Sensitivity Ref: Rated Power into 4 ohms, RCA Inputs: 0,2 – 4,0 V Ref: Rated Power into 4 ohms, Speaker Level Inputs: 0,5 – 10,0 V Crossover Ch 1 / 2: Selectable HPF (-12 dB/oct.), defeatable: Off/60/80/120Hz Ch 3 / 4: Selectable HPF (-12 dB/oct.), defeatable: Off/60/80/120Hz Dimensions Width: 189.0mm (7-7/16”) Height: 38.2mm (1-1/2”) Depth: 64.5mm (2-1/2”) Weight: 0.8kg (1,5lbs)

Alpine’s all-new KTA-30FW weather resistant power pack amplifier will provide a significant increase in sound performance over the factory system. With Alpine’s exclusive technology, Dynamic Peak Power (D.P.P), the KTA-30FW is sure to add higher output and increased dynamic range for those vehicles with limited space. The D.P.P technology uses a new dynamic power supply design that delivers bursts of power during rigorous musical passages, improving dynamic range at high music volumes. The KTA-30FW is weather resistant, rated at IP66 for ultimate protection. Featuring a rugged chassis and high-quality waterproof connector it can be installed where it will be exposed to the elements. This tiny amplifier is perfect for any application and can be installed with an aftermarket or factory head unit, resulting in up to 4 times the power increase over the head unit’s original built-in power. Features Alpine’s Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Compact size 4-channel Amplifier Weather resistant (IP66 rating) 150W x 4 D.P.P. (2Ω/4Ω, 14.4V, ≤ 1% THD+N) CTA-2006-B Specifications: 75W RMS x 4 (2Ω/4Ω, 14.4V, ≤ 1% THD+N) 82dB S/N (ref. 1W into 4Ω) >0.05% THD Hi Resolution Audio Ready OEM-grade Tyco 26-pin connector with pigtail wire harness Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V) Specifications Crossover Crossovers: Off/HP/LP, Fc=50-400Hz @ -12dB/Oct. (variable) Input gain settings (variable) 2ch/4ch input (selectable)   Dimensions Width: 9-3/16” Height: 1-5/8” Depth: 3-3/4”

  The R2-W8D4 handles up to 350 watts RMS, so it's ready for your high-powered amp. Its dual oversized 4-ohm voice coils offer wiring flexibility for multiple subwoofer setups. Since it works well in sealed or ported enclosures you'll enjoy your music the way you like to hear it. 8" subwoofer with dual 4-ohm voice coils Kevlar reinforced pulp cone with HAMR Santoprene rubber surround frequency response: 30-200 Hz power handling: 150-350 watts RMS (175 watts per coil) peak power: 1,000 watts sensitivity: 83.7 dB top-mount depth: 4.631" mounting height: 0.875" sealed box volume: 0.2-0.5 cu. ft. ported box volume: 0.3-0.75 cu. ft.

Features Optional harness for the BMW E46 Required for vehicles that have the original radio black-box installed in the boot Provides all the necessary connections for perfect integration

The All-new R-Series Pro Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.   3-Way Component PRO Speaker The R2-S653 is the top of the line of the new 2022 R-Series speaker line-up. It features a 16.5cm door woofer, 9.6cm mid-range speaker and a 4.3cm tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction.   Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. Flexible PRO X-Over Network This large-size crossover network includes many high-quality components selected for best sound quality. You can adjust the mid-range speaker level by -3dB / 0dB / +3dB and the tweeter level as well by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.   2-Way Component Speaker The R2-S65C is the 2-Way model of the new 2022 R-Series speaker line-up. It features a 16.5cm door woofer, and a 4.3cm tweeter with up to 40kHz frequency response.   Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction.   Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Pro Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line. 2-Way Component PRO Speaker The R2-S652 is the 2-Way PRO model of the new 2022 R-Series speaker line-up. It features a 16.5cm door woofer and a 4,3cm tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction. Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. Flexible PRO X-Over Network This large-size crossover network includes many high-quality components selected for best sound quality. You can adjust the mid-range speaker level by -3dB / 0dB / +3dB and the tweeter level as well by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line. 6×9” 2-Way Component Speaker The R2-S69C is the 6×9” 2-Way model of the new 2022 R-Series speaker line-up. It features a 16 x 24cm door woofer and a 4.3cm tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction. Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line. 6×9” 2-Way Coaxial Speaker The R2-S69 is the 6×9” 2-Way Coax model of the new 2022 R-Series speaker line-up. It features a 16 x 24cm door woofer as well as an integrated tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction. Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

Exclusively designed for the BMW E46 Series, Alpine have re-engineered the iLX-705D to create the perfect solution, providing a new level of entertainment for this luxurious BMW. The iLX-705D is equipped with an exquisite high-definition WXGA display, Hi-Res Audio with LDAC wireless technology, as well as industry-leading innovation to reproduce the most dynamic audio experience ever from a head unit. Enjoy an incredible visual entertainment experience through the WXGA high-resolution display with 2.7 million individual pixel elements. The iLX-705D brings life-like images and colour vibrancy to the dashboard, displaying HDMI sources or USB video in stunning high-definition. Wireless lets you get in and go with instant connectivity to Apple CarPlay or Android Auto. Without your smartphone ever leaving your pocket you can make calls, send and receive messages, stream high-resolution music, access maps and navigation apps—commanding it all via the display or voice control. Enjoy superb audio fidelity with your favourite high-resolution audio tracks from USB, or streaming services and apps via a smartphone. The iLX-705D is fully complaint to Hi-Res Audio specifications, ensuring your music is reproduced with clarity and authenticity as the artist intended. A world-first innovation, the iLX-705D is equipped with a powerful built-in Class-D amplifier to deliver the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker. Making high-resolution sound sources even better, the built-in sound tuning allows you make easy one-touch audio adjustments to suit your preference. In the advanced tuning mode, you have vast array functions such as a 56-band parametric EQ, digital crossover and time-correction, letting you setup and tune the system like a pro. The iLX-705D represents a new benchmark in the 7” multimedia head unit category by offering a unique collaboration of high-specification audio, visual and wireless connectivity, delivering unmatched performance and value. Features Radio / DAB Tuner Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12) Memory: Auto Memory Seek Mode: Local, DX, Pre-Set, Service RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT DAB+/DMB Supported DAB+ Slideshow Service DLS (Dynamic Label Service) DAB Service Following RDS Fallback (where available) Auto Ensemble/Service Memory Service Search Function PTY Search Function Alphabet Search Function BLUETOOTH® Built-in BLUETOOTH® Module V4.2 HFP (Hands-Free Profile) Compatible A2DP (Advanced Audio Distribution Profile) Compatible AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible Phone Book Synchronisation Speed Dial: 4 Preset Memory (per phone) Call History Display: Outgoing Calls / Incoming Calls / Missed Calls Redial Function Speech Volume Level Adjustment: (Outgoing and Incoming) 24 Menu Languages Microphone Included Works with iPhone® Compatible with iPhones featuring a lightning connector Various search functions and Album Artwork Display Battery Charging Connectivity Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone) Works with Android Auto wirelessly (requires Android Auto enabled handset)   **Not all handsets supported and may require wired connection. Navigation Function Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps Includes GPS / Glonass enabled navigation antenna USB Media Connection 2x USB cable included USB port 1: data port / USB port 2: charging port Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible Video Playback: MP4, MOV, FLV, MKV compatible Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2 Various search functions included Sound Tuning Bass Engine SQ and Bass Engine PRO sound tuning Subwoofer Level Adjustment 4 V PreOut 10 Equalizer PreSets 13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer 6-Channel Digital Time Correction 2-way Digital Crossover Independent Source Volume Level Setting General 4x 50 Watts Class-D High Power Amplifier 7-inch Capacitive Touch-Screen WXGA Display (1280 x 720p) Display angle adjustable after installation 3 PreOuts (4 V, Front / Rear / Subwoofer) 1 A/V AUX Input (3.5 mm micro jack) 1 HDMI input / 1 HDMI output 2 USB Ports (1x USB data port / 1x USB charging) Steering Wheel Remote Control Ready Vehicle Display Interface Ready (UART connection) Remote Control Ready 2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box Camera Distance Guides (adjustable) Live Contrast Adjustment Menu Language: 24 Languages Auto Dimmer Anti-theft security code Engine Start-Stop unaffected 3-Year Warranty when installed by Authorised Alpine Dealer Specifications General Power Requirement – 14.4V DC (11-16V allowable) Operating Temperature – -20°C to +60°C Power Output – 50W x 4 Maximum Current Consumption – 15A Audio Output Level Preout (Front, Rear): 4V/10k ohms (max.) Preout (Subwoofer): 4V/10k ohms (max.) Weight 2.3kg Screen Screen Size: 7 inch WXGA LCD Type: Transparent Type TN LCD Operation System: TFT Active Matrix Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3) Illumination System: White LED Backlighting Effective Number of Picture Elements: 99.99% Colour System: NTSC, PAL FM Tuner Tuning Range –   87.5 -105MHz Mono Usable Sensitivity –   8.1 dBf (0.7μV/75 ohms) 50dB Quieting Sensitivity –   12dBf (1.1μV/75 ohms) Alternate Channel Selectivity –  80dB Signal-to-Noise Ratio –  65dB Stereo Seperation –  35dB AM Tuner Tuning Range –   531-1701 kHz Usable Sensitivity –  25.1μV/28 dBf DAB Tuner Tuning Range –   174 – 240 MHz Usable Sensitivity –   -100dBm Signal-to-Noise Ratio – 90dB USB (1) USB Requirements: USB 2.0 Max. Power Consumption: 2,400 mA (CDP Support) USB Class: Mass Storage Class, Play From Device File System: FAT 16/32, exFAT MP3 Decoding: MPEG-1/2 AUDIO Layer-3 WMA Decoding: Windows Media™ Audio AAC Decoding: ACC-LC format ′′.m4a′′ file FLAC Decoding Number of Channels: 2-Channel (Stereo) Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate Total Harmonic Distortion (at 1kHz): 0.005% DynamicRange(at 1kHz): 95 dB Signal-to-Noise Ratio: 95 dB Channel Separation (at 1kHz): 90 dB USB (2) USB Class: Charge Only Max. Power Consumption: 1,500 mA (CDP Support) BLUETOOTH® BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz) Output Power: +4 dBm/2.51 mW Ave. (Power Class 2) HFP: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone Book Access Profile) HSP (Head Set Profile) A2DP: A2DP (Advanced Audio Distribution Profile) AVRCP: AVRCP (Audio/Video Remote Control Profile) SPP (Serial Port Profile) HDMI Section Input Format: 720p/480p/VGA Output Format: 720p/480p GPS Reception Frequency 1575.42 +/- 1.023 MHz Reception Sensitivity (Search) -136dB max. Wi-Fi Frequency Ranges IEEE 802.11 b/g/n (2.4 GHz) IEEE 802.11 a/n/ac (5 GHz) Channels 1 -13 ch (2.4 GHz) 149 – 165 ch (5GHz) Security Protocols WPA3/WPA2-PSK (TKIP, AES) Dimensions Din Size: 1DIN chassis and 7” Capacitive Touch Screen Chassis Size (W x H x D) mm: 178 x 50 x 149.6 Display Size (W x H x D) mm: 171 x 96 x 17.7

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration. The HDP-D90 DSP Amplifier has a 192kHz/32Bit internal sampling rate and an ultra-wide audio bandwidth of 10Hz-110kHz to reproduce sound at its intended high-resolution spec. Intentional designs, like a copper-plated chassis, bring the signal-to-noise ratio up to >110dB and minimise noise and distortion during playback. Drawing inspiration from the internal Master Clock Management System in the AlpineF#1Status DSP, the HDP-D90 contains a Crystal Oscillator Clock Generator at the core of the unit that tracks and aligns digital information to eliminate jitter (timing errors) and accurately reproduce sound. The DSP has multiple input options for flexible system building. For vehicles that are unable to replace the factory Head Unit, the DSP has 12-channels of high-level inputs that allow the factory Head Unit to be retained. The DSP amp also has an optical input to add the Alpine Status HDS-990 Media Player or analog inputs for another aftermarket Head Unit. The HDP-D90 (when used in stand-alone mode) can also receive music sent directly from a smartphone with Bluetooth wireless streaming. While the HDP-D90 has 12-channels of amplification (8x 50W x 4x 80W) and can be used to power an entire system, 10-channels of RCA output can be used to add Alpine Status amplifiers for more power or system building. Features Hi-Res Audio DSP Amplifier (192kHz / 32bit max sampling rate without down-sampling) Built-in 12-channel amplifier (8x 50 Watts + 4x 80 Watts @ 4Ω, 14,4V) MUSES 8820 operational amplifier Highly flexible system configuration Matrix input summing High-Class XO (1/1.000) Crystal Oscillator Clock Generator 31-Band / Channel Parametric / Graphic Equalizer Digital Time Correction External Bluetooth dongle included High-performance PC software Optional controller available (RUX-C810) Specifications Performance Power Output (rated 4Ω, 14,4V, 10% THD): 8x 50 Watt + 4x 80 Watt THD+N RCA: 1W into 4Ω ≤0.01% S/N RCA: A-wt ≥100dB Input Voltage: High level 26 Vpp / RCA 8 Vpp Output Voltage: High level CH1～8: 40 Vpp, CH9～12: 50 Vpp / RCA 10 Vpp Frequency Response (1W into 4Ω): 20Hz～40kHz General Input Impedance: High level 14Ω / RCA 10kΩ System Sampling Rate: 192kHz/32bit Operating Voltage: 9～16V Standby Power Consumption: ≤0.1W Remote Start Input High-Level (H1-/H1+), ACC optional Remote Start Output: 12V (0.2A) Output Channel Signal Gain Range: -60dB～+6dB Output Signal EqualizerType: Parametric / Graphic EqualizerFrequency: 20Hz～40kHz (1Hz steps)Q value: 0.404～28.852Gain: -12.0dB～+12.0dB (0.1dB steps) Output Signal DividerPass independent filtersFilter type: Link-Ril, Bessel, Butter-WFilter crossover point: 20Hz～40kHz (1Hz steps)Filter slope: -6dB/Oct～-48dB/Oct Output Phase: normal phase or reverse phase (0°～360°) Output Delay: 0.000～20.000ms、0～692cm、0～273inch Preset Sound Effects: 6 sound data presets Weight 4.5kg Dimensions: Width 278mm / Depth 256mm / Height 58mm