Focal’s Performance Series subwoofers deliver pure bass power so your music always hits strong and true. This Performance 10″ sub features a light, tough poly cone and a self-regulating cooling system, so it’ll perform reliably. A butyl rubber surround adds to the sub’s strength, durability, and accuracy. SUB P25DB Description With heavy ferrite magnets and 4-layer voice coils, it’s no surprise this sub handles plenty of power — up to 250 watts RMS. The good sensitivity rating means your amp won’t have to work so hard to drive this sub, so you’ll get maximum wallop per watt. The dual 4-ohm voice coils allow you to wire the sub for either 2-ohm or 8-ohm impedance, and you’ll appreciate that versatility as your system grows and changes. You can install this sub in a sealed box for tight, punchy bass, or in a ported enclosure for a little more boom. SUB P25DB Technical specifications 10″ subwoofer with dual 4-ohm voice coils polypropylene cone with butyl rubber surround power range: 50-250 watts RMS peak power handling: 500 watts frequency response: 42-500 Hz sensitivity: 90.9 dB top-mount depth: 5-7/16″ sealed box volume: 0.88-1.59 cubic feet ported box volume: 1.24-2.82 cubic feet

In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V3. HILO.V3 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. The selectable DC and AC voltages detection makes the HILO compatible with any original manufacturer head units. Entirely developed by Focal, HILO is available under generation 3 with an impedance simulator that creates a speaker simulation network to avoid head-unit muting.

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. The Focal 6.5KM 6-1/2" component woofers are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. This pair of Focal 6.5KM component woofers will handle the low-end detail and dynamics in your K2 Power M Series component system.     Powerful sound Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make these 6-1/2" woofers uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 120 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 6-1/2" component woofers (pair) "M"-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket neodymium magnet 4-ohm impedance handles up to 120 watts RMS (240 watts peak power) frequency response: 50-5,000 Hz sensitivity at 2.83V: 92.5 dB top-mount depth: 2-1/8" grille not included warranty: 1 year MFR # 6.5KM Item # 09165KM What's in the box: Two 6.5 KM Woofers Focal Performance owner's manual Eight 1-1/8" Screws Eight speed clips Quick start guide Features & specs General Speaker Size 6 1/2 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition Aramid Fiber Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 93 Frequency Response 50 - 5k Hz Minimum RMS Wattage --- Maximum RMS Wattage 120 Peak Power Handling (Watts) 240 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.45 Frame Width 6.494 Frame Length 6.494

FOCAL P25FSE SHALLOW 250MM / 560W SLIM SUBWOOFER In addition to its 560-watt power and its Flax cone for a natural sound, one of the key features of the P 25 FSE subwoofer is its slim design, making it light and even easier to install in your vehicle. Its built-in motor adds to its compactness, without compromising on the power delivered. Its robust shaped rubber surround allows impressive articulation, synonymous with extended frequency response and deep bass reproduction. Finally, the 1 1/2” (38mm) coil on glass fibre stand reduces overheating to guarantee perfectly adapted ventilation. P 25 FSE is the ideal compromise for ultra-compact sealed-box use (12 to 18L). KEY POINTS Unique, patented Flax cone “Dual Magnet” motor Made in France in the Focal workshops Slim design, even easier integration Power and precision THE FLAX CONE, EXPRESSIVE AND NATURAL This flax cone has been exclusively made in France by Focal since 2013. With its original design, it is 100% geared towards acoustic performance. This sandwich cone is formed of a flax fibre core placed between two thin sheets of glass fibre. Flax is a fibre with the unique ability to reproduce a very natural sound without colouration, with a rich reproduction in the midrange and clear bass strokes. Its lightness offers great dynamics, while its rigidity sustains the bass and provides good damping to deliver a faithful listening experience. Flax fibre is twice as light as glass fibre as it is hollow. Its very low elasticity makes it ideal for increasing the flexural rigidity module of a sandwich structure. SPECIFICATIONS Nominal power 280W RMS Maximum power 560W Sensitivity (2.83V/1m) 87dB Cone Flax Surround Rubber Nom. impedance 4Ω DC resistance 3.2Ω VC diameter 38mm 1.5" Former Glass fiber Layers 4 Wire Copper Net weight 3.5kg 7.7lbs Driver Displacement 2l 0.07cu.ft.  

Meticulous design and construction Handmade in France, Focal's ES 100 KE 4" component speaker system is the culmination of Focal's desire for perfect sound. Focal's sound gurus engaged in intensive listening sessions designing this line of speakers so that you experience uncanny realism, sweeping dynamics, and breathtaking depth in your music. A classic woofer with a twist The ES 100 KE uses Focal's classic "W" sandwich cone design for incredibly accurate audio reproduction. The nimble Kevlar and glass-fiber woofers demonstrate the control needed to play delicate classical passages, yet they'll handle the power needed to drive your bass-heavy tracks with authority. Focal adds a Tuned Mass Damper (TMD®) rubber surround to the woofer design which minimizes harmonic distortion for the cleanest midrange possible. These crossovers direct frequency traffic to the woofer and tweeter, while also providing you settings to get just the right sound. A tweeter designed for smooth highs This system's tweeter employs a one-of-a-kind "M"-shaped inverted aramid fiber dome design that does a better job than ever of dispersing the highs with remarkable precision, all the way up to 22,000 Hz. The K2 Power crossovers use hand-made components developed by Focal to deliver an ideal blend of the highs and lows for a dynamic stereo image. Three levels of tweeter control and one for the woofer let you dial in the sound to your car's environment. Product highlights: component speaker system includes two 4" woofers, 2 tweeters, 2 external crossovers, and hardware K2 Kevlar sandwich woofer cone Tuned Mass Damper (TMD®) butyl rubber surround aramid fiber "M"-shaped inverted-dome tweeter 2-way external crossover with 3 tweeter level settings and one woofer crossover setting 4-ohm impedance power handling: 60 watts RMS (120 watts peak power) frequency response: 110-22,000 Hz sensitivity: 90 dB at 2.83V woofer mounting depth: 1.54" woofer and tweeter grilles included flush- and angle-mount tweeter brackets included warranty: 1 year MFR # ES100KE Item # 091ES10KE Features & specs General Speaker Size 4 Design 2-way Tweeter Design M-Shaped Inverted Dome Impedance (Ohms) 4 Tweeter Composition Aramid Fiber Woofer Composition Aramid Fiber/Glass/Kevlar Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 87.5 Sensitivity at 2.83 volts 90 Frequency Response 110 - 22k Hz Minimum RMS Wattage --- Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 1 9/16 Bottom-mount Depth (Inches) 1 3/4 Cutout Diameter or Length (inches) 3 11/16 Mounting Height (Inches) 0.265 Frame Width 4.015 Frame Length 4.015 What's in the box: Focal owner's manual Two woofers Two inverted dome tweeters (with attached 18" length of speaker wire) 2 Crossovers 2 Tweeter flush trim rings (installed) 2 Tweeter angled surface mount cups 2 Dome protective washers 2 Tweeter grilles (installed) 2 Woofer grilles 2 Woofer grille mounting rings 2 Woofer gaskets 8 Speed clips Four 3/4" Screws Eight 1-1/8" Screws Quick start guide 2 Focal window stickers

Meticulous coaxial design and construction Handmade in France, the K2 Power Series EC 165 KE 2-way car speakers are the culmination of Focal's passion for perfect sound. Focal's sound gurus engaged in intensive listening sessions designing this line of speakers so that you experience uncanny realism, sweeping dynamics, and breathtaking depth in your music. This beefy magnet ensures that this woofer will deliver solid and controlled midbass frequencies. A classic woofer with a new twist The 6-1/2" woofers use Focal's classic "W" sandwich cone design for incredibly accurate audio reproduction. The nimble Kevlar and glass-fiber woofers demonstrate the control needed to play delicate classical passages, yet they'll handle the power needed to drive your bass-heavy tracks with authority. Focal adds a Tuned Mass Damper (TMD®) rubber surround which minimizes harmonic distortion for the cleanest midrange possible. A sweet-sounding, responsive tweeter The EC 165 KE employs a unique aramid fiber tweeter with an "M"-shaped inverted dome design that disperses the highs throughout your vehicle with remarkable precision, all the way up to 22,000 Hz. Product highlights: 6-1/2" 2-way car speakers K2 Kevlar sandwich woofer cone Tuned Mass Damper (TMD®) rubber surround 13/16" aramid fiber "M"-shaped inverted-dome tweeter 4-ohm impedance power handling: 80 watts RMS (160 watts peak power) frequency response: 60-22,000 Hz sensitivity: 93 dB at 2.83V mounting depth: 2.939" grilles included warranty: 1 year MFR # EC165KE Item # 091EC16KE Features & specs General Speaker Size 6 1/2 Design 2-way Tweeter Design M-Shaped Inverted Dome Impedance (Ohms) 4 Tweeter Composition Aramid Fiber Woofer Composition Aramid Fiber/Glass/Kevlar Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 90 Sensitivity at 2.83 volts 93 Frequency Response 60 - 22k Hz Minimum RMS Wattage --- Maximum RMS Wattage 80 Peak Power Handling (Watts) 160 Top-mount Depth (Inches) 3 Bottom-mount Depth (Inches) 3 1/8 Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.481 Frame Width 6.486 Frame Length 6.486 What's in the box: Focal owner's manual Two 2-way speakers 2 Grilles 2 Grille mounting rings 2 Mounting gaskets 8 Speed clips Four 3/4" Screws Eight 1-1/8" Screws Quick start guide 2 Focal window stickers

FOCAL ASE 130AUDITOR EVO SERIES 5-1/4" COMPONENT SPEAKER SYSTEM The benefit of Focal innovation Focal designed their updated Auditor EVO Series speakers in France. That's a big deal — it means that these entry-level car speakers were reimagined by some of the same minds that design their flagship models. You'll recognize staples of Focal's famous sound: the inverted dome tweeter for precise treble and an improved soundstage; a polypropylene cone for a neutral and dynamic sound; and a butyl surround for impressive responsiveness. The aim of Auditor EVO Focal's goal is to improve the audio experience in any type of car, and this impressive ASE 130 component system, which includes two 5-1/4" woofers, two tweeters, and two prewired high-fidelity crossovers, will easily outperform your factory speakers and bring the fun back to your time in the car. Prepare for a new level of richness in the midrange, and Focal's acclaimed inverted dome tweeter broadcasts high-frequency details that put standard tweeter designs to shame. Ready to ride A polypropylene woofer cone and butyl rubber surround ensure these speakers will live a long life in your car doors, withstanding all kinds of environmental abuse while delivering robust sound. The black lacquered finish of the tweeters and included mounting options also ensure you'll be able to maintain a factory look if factory tweeter locations aren't available. Product highlights: component speaker system includes two 5-1/4" woofers, 2 tweeters, and 2 external crossovers polypropylene woofer with butyl rubber surround Mylar inverted dome tweeter mesh/ABS grilles included prewired external crossover (12dB/oct) handles up to 50 watts RMS (100 watts peak power) frequency response: 65-21,000 Hz sensitivity: 90 dB impedance: 4 ohms woofer mounting depth: 2-3/16" warranty: 1 year MFR # ASE130 Item # 091ASE130 Features & specs General Speaker Size 5 1/4 Design 2-way Tweeter Design Inverted Dome Impedance (Ohms) 4 Tweeter Composition Mylar Woofer Composition Polypropylene Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 90 Frequency Response 65 - 21k Hz Minimum RMS Wattage --- Maximum RMS Wattage 50 Peak Power Handling (Watts) 100 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) 2 7/16 Cutout Diameter or Length (inches) 4 11/16 Mounting Height (Inches) 0.242 Frame Width 5.124 Frame Length 5.124 What's in the box: Two woofers Focal owner's manual Two tweeters (each with 18" length of speaker wire attached) 2 Flush mount tweeter cups (installed) 2 Surface mount tweeter adapters 2 Angled surface mount tweeter adapters 2 Crossovers 2 Woofer grilles 2 Woofer grille mounting rings 12 Speed clips Eight 1-3/8" Screws Four 1" Screws 2 Adhesive backed pads Owner's manual (English/ French/ German/ Spanish/ Italian/ Portuguese/ Dutch/ Polish/ Chinese/ Russian/ Korean/ Japanese/ Arabic)

FOCAL TOYOTA HILUX POWERED 6.2 PACK 2006-2019 FITS TOYOTA HILUX 2006-2019 Front: IS TOY 165 SplitsRear: IC TOY 165 CoaxialSubwoofer: PSB200Amplifier: Impulse 4.320 Power 2×55 Watts RMS to Front Speakers, 1×160 Watts RMS to SubwooferCables: IW IMP 2.1, IW TOY Y ISO HARNESS FRONT: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system. 

Front: IS TOY 690 SplitsRear: IC TOY 165Amplifier: Impulse4.320 Power 2x55WattsRMS to Front SpeakersHarnesses: IMP EXTENSION I/O and ISO IW TOY Y ISO   FRONT: IS TOY 690 is a two-way component kit with a 6×9‚Äô‚Äôwoofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Reliable, neutral and powerful, the compactness and the ergonomics of the IS TOY 690 makes it easy to integrate thanks to the factory connectors. REAR: IC TOY 165 is a two-way coaxial kit with a 6¬Ω” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IC TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.  AND: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables.

The speaker drivers from the PS 165 F3E kit combine the best of Flax technology with the latest Focal innovations to deliver one of the most natural sounds. The TMD surround (Tuned Mass Damper) is incorporated in the woofers and midranges to stabilise the surround and achieve better control, neutrality and linearity: the bass is even denser, the performance in the top midrange is improved and harmonic distortion reduced. Combined, these speaker drivers create a precise, powerful sound without colouration.The ‚ÄòM‚Äô-profile inverted dome TAM tweeters included in the kit offer a wider diffusion angle and greater sound definition, without directionality. Thanks to their tilted mounting, they are easy to install in the vehicle. An audiophile crossover completes the kit, offering several adjustment levels for the tweeters and midranges. Finally, with its engraved aluminium basket and meticulous finishes, PS 165 F3E combines style, discretion and modernity for a premium system. PS165F3E Features Unique, patented Flax cone Butyl surround with exclusive ‘TMD‚Äô profile Al/Mg ‚ÄòM‚Äô-profile inverted dome TAM tweeter Made in France in the Focal workshops High power handling Deep, sustained bass Very compact midrange Wider diffusion angle Natural, precise sound Easy installation

Designed and developed in France, the Sub 10 Dual benefits from Focal’s sound savoir-faire. With its 10” (25 cm) polypropylene cone, this subwoofer provides an excellent bass boost for any on-board audio system. Its double voice coil architecture offers the option to fit it in parallel with a 2-Ohm operation, allowing the amplifier’s maximum power to be exploited. Key points• A deep and powerful bass• Effective as bass-reflex or sealed box• Sealed box from 10L• Bass-reflex box from 25L• Parallel voice coil connection for more SPL• Robust design; steel chassis• Excellent power handling

Alpine Hilux 2012-2015 R2 Series Speaker Solution ( Front & Rear ) -Hl15-R265 Turn up the bass in your Toyota Hilux — the next Generation R-Series are born to be played loud with Alpine’s all-new R-Series ‘direct fit’ premium speaker upgrade. Equipped with Alpine’s exclusively designed tweeter housing superior sound quality is achieved, all-while your cabin space is enhanced with its striking appearance and premium finishes inclusive of a machine finished metal Alpine logo and contrasting black chrome accent. Alpine engineered and reborn from the ground up, the all-new R-Series speaker housings unites true Hi-Fi sound quality and ultra-bass performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housing with a machine cut Alpine logo and an elegant black chrome bezel which are all pre-assembled parts ready for direct installation to your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters housed within the centre of the speaker and tweeter delivers an ultra-clear, yet highly detailed and smooth response. They play right up to 40kHz allowing harmonics to reveal the finest of nuances for an authentic sound experience, faithfully to the original recording. Direct Fit Installation All speakers interface directly to the OEM, providing a quick and easy ‘plug-n-play’ connection. This means there is no need to cut, solder or modify any of the vehicle’s original wiring — saving you time by easily utilising the original speaker wires, allowing for a straight and simple installation. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. Features Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Swivel Application allowing the sound to be focused for the best in-car sound performance Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 65Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Swivel Tweeters Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 165mm Woofer Diameter (in): 6-1/2″ Woofer Mounting Diameter (mm): 176mm Woofer Mounting Diameter (in): 6-15/16″ Woofer Mounting Depth (mm): 59mm Woofer Mounting Depth (in): 2-3/8″  

IC FORD 690 2-Way Coaxial Kit The IC FORD 690 2-way coaxial kit is designed for all drivers who wish to install a quality sound solution in their vehicle. The speaker drivers feature Polyglass technology, which delivers well-defined midrange and bass, and the Aluminium inverted dome tweeter, a Focal technology that provides perfect treble reproduction. Installing this kit does not require any soldering, cable trimming or vehicle modification. The integration is also invisible.

IC FORD 165 2-Way Coaxial Kit The IC FORD 165 2-way coaxial kit is designed for all drivers who wish to install a quality sound solution in their vehicle. The speaker drivers feature Polyglass technology, which delivers well-defined midrange and bass, and the Aluminium inverted dome tweeter, a Focal technology that provides perfect treble reproduction. Installing this kit does not require any soldering, cable trimming or vehicle modification. The integration is also invisible.

4-CHANNEL AMPLIFIER – 4X120 W RMS The FPX 4.800 is a very compact 4-channel amplifier with a power of 4×120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair of output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line. FOCAL FPX 4.800 KEY FEATURES 4-/3-/2-channel Class D amplifier 2-/4-channel input modes Stable at 2 Ohms Active crossover for each pair of channels EXTREMELY VERSATILE Thanks to its 4×120 Watts RMS at 4 Ohms and its compact chassis barely bigger than half a page of A4 paper, the FPX 4.800 is an ideal solution for a wide range of uses. In bridged mode, it delivers 2×370 Watts RMS at 4 Ohms, enabling it to power a significant subwoofer channel with channels 3 and 4. It is also stable at 2 Ohms (4×185 Watts RMS) so it can also be used for powering different types of speaker drivers. In order to perfectly power the speaker drivers, each pair of channels is equipped with an adjustable active crossover from 50 to 500 Hz: high-pass, low-pass or wideband. Channels 3 & 4 are equipped with bass correction. The 2-/4-channel input modes ensure compatibility with mid-range head units only equipped with a pair of output lines. WHAT MAKES THE DIFFERENCE A compact and versatile amplifier Optimised heat dissipation Extremely versatile Remarkable power/performance/price ratio

Extremely Versatile With the FPX 5.1200, installation of this hi-fi system is much easier as there's only one amplifier and one power supply to fit into the vehicle. In order to control this 5-channel installation (with front and rear speaker drivers, and a subwoofer), the FPX 5.1200 features a wide range of settings. The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs. For the main speaker drivers, each pair of channels has an adjustable active crossover. To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to. Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With the launch of the FPX 5.1200, Focal now offers a full range of amplifiers, from the Impulse ‘Plug & Play’ amplifier to the audiophile FPX amplifier. Through our compact FD amplifiers, Focal is able to meet the expectations of all those looking for a car audio amplifier. With its high power, great musicality and compact design, as well as being ideal for powering a complete installation with Flax or K2 Power speaker drivers, the FPX 5.1200 will meet all the expectations of hi-fi car audio enthusiasts. Extensive research for unprecedented power in a compact enclosure Delivering very high power from such a compact enclosure is a true challenge. The more heat an amplifier produces, the higher the risk of distortion affecting the system’s musicality. By using Class D technology, Focal has reduced the need for heat dissipation for its FPX range. However, in order to achieve high efficiency and to optimise reliability, FPX amplifiers required extensive research: the selection of the best components, a thick aluminium chassis, very precise positioning of the components, monitoring heat dissipation with a thermal camera and accelerated aging tests in draconian conditions. Focal’s goal is to offer electronics equipment which is very compact and powerful, but without sacrificing musicality. The dimensions of the 5-channel FPX 5.1200 amplifier (337 x 175 x 57mm / 13.25"x 6.8" x 2.25") are nearly the same as the FPX 4.400 SQ. The FPX 5.1200 has a maximum power of 4 x 120 Watts + 1 x 720 Watts at 2 Ohms!

PS 165 V1 Description The Focal PC 165 V1 6.5″ 2-way coaxial speakers feature Partial horn loading of the tweeter and high sensitivity to ensure dynamics and neutrality even off high powered factory stereo systems. Features: Partial Horn Loading High Sensitivity Dynamics & Neutrality Adjustable Tweeter Levels 80W RMS Nominal Power Handling 160W RMS Max. Power Handling Specifications: 2-way coaxial kit Diameter: 61/2" (165mm) Voice-coil diameter: 1" (25mm) Voice-coil height: 01/2" (13mm) Motor: Magnet Aluminium/Magnesium inverted dome tweeter Cone: Flax Integrated crossover: 6dB/Oct Max. power: 140W Nom. power: 70W RMS Sensitivity (2.83V/1m): 91.9dB Frequency response: 60Hz – 28kHz Impedance: 4Ω Accessories: Supplied grilles