Focal’s Performance Series subwoofers deliver pure bass power so your music always hits strong and true. This Performance 10″ sub features a light, tough poly cone and a self-regulating cooling system, so it’ll perform reliably. A butyl rubber surround adds to the sub’s strength, durability, and accuracy. SUB P25DB Description With heavy ferrite magnets and 4-layer voice coils, it’s no surprise this sub handles plenty of power — up to 250 watts RMS. The good sensitivity rating means your amp won’t have to work so hard to drive this sub, so you’ll get maximum wallop per watt. The dual 4-ohm voice coils allow you to wire the sub for either 2-ohm or 8-ohm impedance, and you’ll appreciate that versatility as your system grows and changes. You can install this sub in a sealed box for tight, punchy bass, or in a ported enclosure for a little more boom. SUB P25DB Technical specifications 10″ subwoofer with dual 4-ohm voice coils polypropylene cone with butyl rubber surround power range: 50-250 watts RMS peak power handling: 500 watts frequency response: 42-500 Hz sensitivity: 90.9 dB top-mount depth: 5-7/16″ sealed box volume: 0.88-1.59 cubic feet ported box volume: 1.24-2.82 cubic feet

In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V3. HILO.V3 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. The selectable DC and AC voltages detection makes the HILO compatible with any original manufacturer head units. Entirely developed by Focal, HILO is available under generation 3 with an impedance simulator that creates a speaker simulation network to avoid head-unit muting.

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. The Focal 6.5KM 6-1/2" component woofers are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. This pair of Focal 6.5KM component woofers will handle the low-end detail and dynamics in your K2 Power M Series component system.     Powerful sound Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make these 6-1/2" woofers uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 120 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 6-1/2" component woofers (pair) "M"-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket neodymium magnet 4-ohm impedance handles up to 120 watts RMS (240 watts peak power) frequency response: 50-5,000 Hz sensitivity at 2.83V: 92.5 dB top-mount depth: 2-1/8" grille not included warranty: 1 year MFR # 6.5KM Item # 09165KM What's in the box: Two 6.5 KM Woofers Focal Performance owner's manual Eight 1-1/8" Screws Eight speed clips Quick start guide Features & specs General Speaker Size 6 1/2 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition Aramid Fiber Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 93 Frequency Response 50 - 5k Hz Minimum RMS Wattage --- Maximum RMS Wattage 120 Peak Power Handling (Watts) 240 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.45 Frame Width 6.494 Frame Length 6.494

FOCAL P25FSE SHALLOW 250MM / 560W SLIM SUBWOOFER In addition to its 560-watt power and its Flax cone for a natural sound, one of the key features of the P 25 FSE subwoofer is its slim design, making it light and even easier to install in your vehicle. Its built-in motor adds to its compactness, without compromising on the power delivered. Its robust shaped rubber surround allows impressive articulation, synonymous with extended frequency response and deep bass reproduction. Finally, the 1 1/2” (38mm) coil on glass fibre stand reduces overheating to guarantee perfectly adapted ventilation. P 25 FSE is the ideal compromise for ultra-compact sealed-box use (12 to 18L). KEY POINTS Unique, patented Flax cone “Dual Magnet” motor Made in France in the Focal workshops Slim design, even easier integration Power and precision THE FLAX CONE, EXPRESSIVE AND NATURAL This flax cone has been exclusively made in France by Focal since 2013. With its original design, it is 100% geared towards acoustic performance. This sandwich cone is formed of a flax fibre core placed between two thin sheets of glass fibre. Flax is a fibre with the unique ability to reproduce a very natural sound without colouration, with a rich reproduction in the midrange and clear bass strokes. Its lightness offers great dynamics, while its rigidity sustains the bass and provides good damping to deliver a faithful listening experience. Flax fibre is twice as light as glass fibre as it is hollow. Its very low elasticity makes it ideal for increasing the flexural rigidity module of a sandwich structure. SPECIFICATIONS Nominal power 280W RMS Maximum power 560W Sensitivity (2.83V/1m) 87dB Cone Flax Surround Rubber Nom. impedance 4Ω DC resistance 3.2Ω VC diameter 38mm 1.5" Former Glass fiber Layers 4 Wire Copper Net weight 3.5kg 7.7lbs Driver Displacement 2l 0.07cu.ft.  

Meticulous design and construction Handmade in France, Focal's ES 100 KE 4" component speaker system is the culmination of Focal's desire for perfect sound. Focal's sound gurus engaged in intensive listening sessions designing this line of speakers so that you experience uncanny realism, sweeping dynamics, and breathtaking depth in your music. A classic woofer with a twist The ES 100 KE uses Focal's classic "W" sandwich cone design for incredibly accurate audio reproduction. The nimble Kevlar and glass-fiber woofers demonstrate the control needed to play delicate classical passages, yet they'll handle the power needed to drive your bass-heavy tracks with authority. Focal adds a Tuned Mass Damper (TMD®) rubber surround to the woofer design which minimizes harmonic distortion for the cleanest midrange possible. These crossovers direct frequency traffic to the woofer and tweeter, while also providing you settings to get just the right sound. A tweeter designed for smooth highs This system's tweeter employs a one-of-a-kind "M"-shaped inverted aramid fiber dome design that does a better job than ever of dispersing the highs with remarkable precision, all the way up to 22,000 Hz. The K2 Power crossovers use hand-made components developed by Focal to deliver an ideal blend of the highs and lows for a dynamic stereo image. Three levels of tweeter control and one for the woofer let you dial in the sound to your car's environment. Product highlights: component speaker system includes two 4" woofers, 2 tweeters, 2 external crossovers, and hardware K2 Kevlar sandwich woofer cone Tuned Mass Damper (TMD®) butyl rubber surround aramid fiber "M"-shaped inverted-dome tweeter 2-way external crossover with 3 tweeter level settings and one woofer crossover setting 4-ohm impedance power handling: 60 watts RMS (120 watts peak power) frequency response: 110-22,000 Hz sensitivity: 90 dB at 2.83V woofer mounting depth: 1.54" woofer and tweeter grilles included flush- and angle-mount tweeter brackets included warranty: 1 year MFR # ES100KE Item # 091ES10KE Features & specs General Speaker Size 4 Design 2-way Tweeter Design M-Shaped Inverted Dome Impedance (Ohms) 4 Tweeter Composition Aramid Fiber Woofer Composition Aramid Fiber/Glass/Kevlar Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 87.5 Sensitivity at 2.83 volts 90 Frequency Response 110 - 22k Hz Minimum RMS Wattage --- Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 1 9/16 Bottom-mount Depth (Inches) 1 3/4 Cutout Diameter or Length (inches) 3 11/16 Mounting Height (Inches) 0.265 Frame Width 4.015 Frame Length 4.015 What's in the box: Focal owner's manual Two woofers Two inverted dome tweeters (with attached 18" length of speaker wire) 2 Crossovers 2 Tweeter flush trim rings (installed) 2 Tweeter angled surface mount cups 2 Dome protective washers 2 Tweeter grilles (installed) 2 Woofer grilles 2 Woofer grille mounting rings 2 Woofer gaskets 8 Speed clips Four 3/4" Screws Eight 1-1/8" Screws Quick start guide 2 Focal window stickers

Meticulous coaxial design and construction Handmade in France, the K2 Power Series EC 165 KE 2-way car speakers are the culmination of Focal's passion for perfect sound. Focal's sound gurus engaged in intensive listening sessions designing this line of speakers so that you experience uncanny realism, sweeping dynamics, and breathtaking depth in your music. This beefy magnet ensures that this woofer will deliver solid and controlled midbass frequencies. A classic woofer with a new twist The 6-1/2" woofers use Focal's classic "W" sandwich cone design for incredibly accurate audio reproduction. The nimble Kevlar and glass-fiber woofers demonstrate the control needed to play delicate classical passages, yet they'll handle the power needed to drive your bass-heavy tracks with authority. Focal adds a Tuned Mass Damper (TMD®) rubber surround which minimizes harmonic distortion for the cleanest midrange possible. A sweet-sounding, responsive tweeter The EC 165 KE employs a unique aramid fiber tweeter with an "M"-shaped inverted dome design that disperses the highs throughout your vehicle with remarkable precision, all the way up to 22,000 Hz. Product highlights: 6-1/2" 2-way car speakers K2 Kevlar sandwich woofer cone Tuned Mass Damper (TMD®) rubber surround 13/16" aramid fiber "M"-shaped inverted-dome tweeter 4-ohm impedance power handling: 80 watts RMS (160 watts peak power) frequency response: 60-22,000 Hz sensitivity: 93 dB at 2.83V mounting depth: 2.939" grilles included warranty: 1 year MFR # EC165KE Item # 091EC16KE Features & specs General Speaker Size 6 1/2 Design 2-way Tweeter Design M-Shaped Inverted Dome Impedance (Ohms) 4 Tweeter Composition Aramid Fiber Woofer Composition Aramid Fiber/Glass/Kevlar Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 90 Sensitivity at 2.83 volts 93 Frequency Response 60 - 22k Hz Minimum RMS Wattage --- Maximum RMS Wattage 80 Peak Power Handling (Watts) 160 Top-mount Depth (Inches) 3 Bottom-mount Depth (Inches) 3 1/8 Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.481 Frame Width 6.486 Frame Length 6.486 What's in the box: Focal owner's manual Two 2-way speakers 2 Grilles 2 Grille mounting rings 2 Mounting gaskets 8 Speed clips Four 3/4" Screws Eight 1-1/8" Screws Quick start guide 2 Focal window stickers

FOCAL ASE 130AUDITOR EVO SERIES 5-1/4" COMPONENT SPEAKER SYSTEM The benefit of Focal innovation Focal designed their updated Auditor EVO Series speakers in France. That's a big deal — it means that these entry-level car speakers were reimagined by some of the same minds that design their flagship models. You'll recognize staples of Focal's famous sound: the inverted dome tweeter for precise treble and an improved soundstage; a polypropylene cone for a neutral and dynamic sound; and a butyl surround for impressive responsiveness. The aim of Auditor EVO Focal's goal is to improve the audio experience in any type of car, and this impressive ASE 130 component system, which includes two 5-1/4" woofers, two tweeters, and two prewired high-fidelity crossovers, will easily outperform your factory speakers and bring the fun back to your time in the car. Prepare for a new level of richness in the midrange, and Focal's acclaimed inverted dome tweeter broadcasts high-frequency details that put standard tweeter designs to shame. Ready to ride A polypropylene woofer cone and butyl rubber surround ensure these speakers will live a long life in your car doors, withstanding all kinds of environmental abuse while delivering robust sound. The black lacquered finish of the tweeters and included mounting options also ensure you'll be able to maintain a factory look if factory tweeter locations aren't available. Product highlights: component speaker system includes two 5-1/4" woofers, 2 tweeters, and 2 external crossovers polypropylene woofer with butyl rubber surround Mylar inverted dome tweeter mesh/ABS grilles included prewired external crossover (12dB/oct) handles up to 50 watts RMS (100 watts peak power) frequency response: 65-21,000 Hz sensitivity: 90 dB impedance: 4 ohms woofer mounting depth: 2-3/16" warranty: 1 year MFR # ASE130 Item # 091ASE130 Features & specs General Speaker Size 5 1/4 Design 2-way Tweeter Design Inverted Dome Impedance (Ohms) 4 Tweeter Composition Mylar Woofer Composition Polypropylene Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 90 Frequency Response 65 - 21k Hz Minimum RMS Wattage --- Maximum RMS Wattage 50 Peak Power Handling (Watts) 100 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) 2 7/16 Cutout Diameter or Length (inches) 4 11/16 Mounting Height (Inches) 0.242 Frame Width 5.124 Frame Length 5.124 What's in the box: Two woofers Focal owner's manual Two tweeters (each with 18" length of speaker wire attached) 2 Flush mount tweeter cups (installed) 2 Surface mount tweeter adapters 2 Angled surface mount tweeter adapters 2 Crossovers 2 Woofer grilles 2 Woofer grille mounting rings 12 Speed clips Eight 1-3/8" Screws Four 1" Screws 2 Adhesive backed pads Owner's manual (English/ French/ German/ Spanish/ Italian/ Portuguese/ Dutch/ Polish/ Chinese/ Russian/ Korean/ Japanese/ Arabic)

FOCAL TOYOTA HILUX POWERED 6.2 PACK 2006-2019 FITS TOYOTA HILUX 2006-2019 Front: IS TOY 165 SplitsRear: IC TOY 165 CoaxialSubwoofer: PSB200Amplifier: Impulse 4.320 Power 2×55 Watts RMS to Front Speakers, 1×160 Watts RMS to SubwooferCables: IW IMP 2.1, IW TOY Y ISO HARNESS FRONT: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system. 

Front: IS TOY 690 SplitsRear: IC TOY 165Amplifier: Impulse4.320 Power 2x55WattsRMS to Front SpeakersHarnesses: IMP EXTENSION I/O and ISO IW TOY Y ISO   FRONT: IS TOY 690 is a two-way component kit with a 6×9‚Äô‚Äôwoofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Reliable, neutral and powerful, the compactness and the ergonomics of the IS TOY 690 makes it easy to integrate thanks to the factory connectors. REAR: IC TOY 165 is a two-way coaxial kit with a 6¬Ω” woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota models. Excellent reliability, neutral sound and deep bass, compact and ergonomic, the IC TOY 165 kit has been designed respecting the factory connectors for a real facilitated integration. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.  AND: The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables.

The speaker drivers from the PS 165 F3E kit combine the best of Flax technology with the latest Focal innovations to deliver one of the most natural sounds. The TMD surround (Tuned Mass Damper) is incorporated in the woofers and midranges to stabilise the surround and achieve better control, neutrality and linearity: the bass is even denser, the performance in the top midrange is improved and harmonic distortion reduced. Combined, these speaker drivers create a precise, powerful sound without colouration.The ‚ÄòM‚Äô-profile inverted dome TAM tweeters included in the kit offer a wider diffusion angle and greater sound definition, without directionality. Thanks to their tilted mounting, they are easy to install in the vehicle. An audiophile crossover completes the kit, offering several adjustment levels for the tweeters and midranges. Finally, with its engraved aluminium basket and meticulous finishes, PS 165 F3E combines style, discretion and modernity for a premium system. PS165F3E Features Unique, patented Flax cone Butyl surround with exclusive ‘TMD‚Äô profile Al/Mg ‚ÄòM‚Äô-profile inverted dome TAM tweeter Made in France in the Focal workshops High power handling Deep, sustained bass Very compact midrange Wider diffusion angle Natural, precise sound Easy installation

Designed and developed in France, the Sub 10 Dual benefits from Focal’s sound savoir-faire. With its 10” (25 cm) polypropylene cone, this subwoofer provides an excellent bass boost for any on-board audio system. Its double voice coil architecture offers the option to fit it in parallel with a 2-Ohm operation, allowing the amplifier’s maximum power to be exploited. Key points• A deep and powerful bass• Effective as bass-reflex or sealed box• Sealed box from 10L• Bass-reflex box from 25L• Parallel voice coil connection for more SPL• Robust design; steel chassis• Excellent power handling

IC FORD 690 2-Way Coaxial Kit The IC FORD 690 2-way coaxial kit is designed for all drivers who wish to install a quality sound solution in their vehicle. The speaker drivers feature Polyglass technology, which delivers well-defined midrange and bass, and the Aluminium inverted dome tweeter, a Focal technology that provides perfect treble reproduction. Installing this kit does not require any soldering, cable trimming or vehicle modification. The integration is also invisible.

IC FORD 165 2-Way Coaxial Kit The IC FORD 165 2-way coaxial kit is designed for all drivers who wish to install a quality sound solution in their vehicle. The speaker drivers feature Polyglass technology, which delivers well-defined midrange and bass, and the Aluminium inverted dome tweeter, a Focal technology that provides perfect treble reproduction. Installing this kit does not require any soldering, cable trimming or vehicle modification. The integration is also invisible.

4-CHANNEL AMPLIFIER – 4X120 W RMS The FPX 4.800 is a very compact 4-channel amplifier with a power of 4×120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair of output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line. FOCAL FPX 4.800 KEY FEATURES 4-/3-/2-channel Class D amplifier 2-/4-channel input modes Stable at 2 Ohms Active crossover for each pair of channels EXTREMELY VERSATILE Thanks to its 4×120 Watts RMS at 4 Ohms and its compact chassis barely bigger than half a page of A4 paper, the FPX 4.800 is an ideal solution for a wide range of uses. In bridged mode, it delivers 2×370 Watts RMS at 4 Ohms, enabling it to power a significant subwoofer channel with channels 3 and 4. It is also stable at 2 Ohms (4×185 Watts RMS) so it can also be used for powering different types of speaker drivers. In order to perfectly power the speaker drivers, each pair of channels is equipped with an adjustable active crossover from 50 to 500 Hz: high-pass, low-pass or wideband. Channels 3 & 4 are equipped with bass correction. The 2-/4-channel input modes ensure compatibility with mid-range head units only equipped with a pair of output lines. WHAT MAKES THE DIFFERENCE A compact and versatile amplifier Optimised heat dissipation Extremely versatile Remarkable power/performance/price ratio

Extremely Versatile With the FPX 5.1200, installation of this hi-fi system is much easier as there's only one amplifier and one power supply to fit into the vehicle. In order to control this 5-channel installation (with front and rear speaker drivers, and a subwoofer), the FPX 5.1200 features a wide range of settings. The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs. For the main speaker drivers, each pair of channels has an adjustable active crossover. To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to. Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With the launch of the FPX 5.1200, Focal now offers a full range of amplifiers, from the Impulse ‘Plug & Play’ amplifier to the audiophile FPX amplifier. Through our compact FD amplifiers, Focal is able to meet the expectations of all those looking for a car audio amplifier. With its high power, great musicality and compact design, as well as being ideal for powering a complete installation with Flax or K2 Power speaker drivers, the FPX 5.1200 will meet all the expectations of hi-fi car audio enthusiasts. Extensive research for unprecedented power in a compact enclosure Delivering very high power from such a compact enclosure is a true challenge. The more heat an amplifier produces, the higher the risk of distortion affecting the system’s musicality. By using Class D technology, Focal has reduced the need for heat dissipation for its FPX range. However, in order to achieve high efficiency and to optimise reliability, FPX amplifiers required extensive research: the selection of the best components, a thick aluminium chassis, very precise positioning of the components, monitoring heat dissipation with a thermal camera and accelerated aging tests in draconian conditions. Focal’s goal is to offer electronics equipment which is very compact and powerful, but without sacrificing musicality. The dimensions of the 5-channel FPX 5.1200 amplifier (337 x 175 x 57mm / 13.25"x 6.8" x 2.25") are nearly the same as the FPX 4.400 SQ. The FPX 5.1200 has a maximum power of 4 x 120 Watts + 1 x 720 Watts at 2 Ohms!

PS 165 V1 Description The Focal PC 165 V1 6.5″ 2-way coaxial speakers feature Partial horn loading of the tweeter and high sensitivity to ensure dynamics and neutrality even off high powered factory stereo systems. Features: Partial Horn Loading High Sensitivity Dynamics & Neutrality Adjustable Tweeter Levels 80W RMS Nominal Power Handling 160W RMS Max. Power Handling Specifications: 2-way coaxial kit Diameter: 61/2" (165mm) Voice-coil diameter: 1" (25mm) Voice-coil height: 01/2" (13mm) Motor: Magnet Aluminium/Magnesium inverted dome tweeter Cone: Flax Integrated crossover: 6dB/Oct Max. power: 140W Nom. power: 70W RMS Sensitivity (2.83V/1m): 91.9dB Frequency response: 60Hz – 28kHz Impedance: 4Ω Accessories: Supplied grilles

High-performance sub This sub's name gets straight to the point — Focal's K2 Power Series SUB 30 KXE 12" subwoofer delivers hard-hitting low end that combines realistic reproduction and competition-level sound pressure. Precision engineering and hand-assembled construction make this sub a sound choice for a high-performance bass system. Assembled and inspected by hand You can feed the K2 Power E 30 KX 12" subwoofer up to 800 watts RMS without fear. This dual 4-ohm voice coil sub works best in sealed enclosures to produce bass that's highly accurate and plenty forceful. Focal assembles its subs by hand in their French facilities and rigorously inspects them for any flaws to ensure your investment performs to the high sonic standards they've set. A powerful magnet drives the sound A massive two-segment magnet supplies the backbone for the sub's powerful output, driving the motor assembly with unerring precision. Focal anchors the K2 Power sub with an aluminum basket that combines rigidity and efficient heat dissipation for reduced distortion and longer speaker life. 4-layer cone Focal's proprietary K2 4-layer aramid fiber composite sandwich cone combines rigidity and responsiveness to deliver sonic fidelity and high power handling. A butyl rubber surround maintains control of the cone, even during deep excursion. Subwoofer Wiring Diagrams Product highlights: 12" dual 4-ohm voice coil subwoofer 4-layer K2 composite sandwich cone with butyl rubber surround aluminum basket power handling: 800 watts RMS (1600 watts peak) frequency response: 25-500 Hz sensitivity: 86.5 dB top mount depth: 6.75" cutout diameter: 11.152 sealed box volume: 0.99 - 1.41 cu. ft. grille not included warranty: 1 year MFR # SUB30KXE Item # 091SUB30KX What's in the box: 12" Dual 4-ohm voice coil subwoofer Focal owner's manual Quick start guide (English/ French/ German/ Italian/ Spanish/ Portuguese/ Dutch/ Russian/ Polish/ Chinese/ Korean/ Japanese/ Arabic) Features & specs Features and Specs Size 12 -inch Impedance (Ohms) 2, 8 Cone Material K2 Aramid Fiber Sandwich Surround Material Butyl Rubber Port diameter (inches) N/A Port length (inches) N/A Free-Air No Dual Voice Coil Yes Sensitivity 86.5 dB at 2.83 volts Frequency Response 25 - 500 Hz Max RMS Power Handling 800 Peak Power Handling (Watts) 1600 Top Mount Depth (inches) 6 3/4 Bottom Mount Depth (inches) N/A Cutout Diameter or Length (inches) 11 3/16 Frame Width 12.5 Frame Length 12.5 Vas (liters) 50 Fs (Hz) 29 Qts 0.46 Xmax (millimeters) 22.5 Parts Warranty 1 Year Labor Warranty 1 Year Box Requirements Ideal Sealed Box Volume (cubic feet) N/A Minimum Sealed Box Volume (cubic feet) 0.7 Maximum Sealed Box Volume (cubic feet) 1.5 Ideal Ported Box Volume (cubic feet) N/A Minimum Ported Box Volume (cubic feet) N/A Maximum Ported Box Volume (cubic feet) N/A

4-Channel Compact Digital Amplifier Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. Semi "Plug&Play", Impulse 4.320 is a miniature 4-channel digital amplifier delivering 4 x 55 Watts. Impulse 4.320 is the perfect complement for your Focal Integration speaker drivers. TECHNOLOGY PLATFORM FROM FD AMPLIFIERS The technology used for Impulse 4.320 was inspired by the Performance range‚Äôs FD amplifiers. With an efficiency of more than 90%, Class D amplification has numerous advantages: less heat, low power consumption, low distortion at high volumes, compact… With the Impulse 4.320 amplifier, an unbeatable size/power ratio has been achieved. It delivers 4 x 55 or 2 x 160 Watts RMS at 4 Ohms. Thanks to the adequate power and the fast attack for realistic and more aerated sound, it will completely transform the sound of your front and rear speaker drivers. VERY EASY TO INSTALL AND PERFECT INTEGRATION Impulse 4.320 – Cables Measuring only 6-7/8 x 1-7/8 x 2-5/8" (17.65 x 4.6 x 6.7 cm) Impulse 4.320 can easily be concealed within the dashboard or the centre console. Equipped with high-level (automatic detection feature) and low-level inputs, it is compatible with all head units. Supplied with all fastenings, an adaptor for the head unit‚Äôs speaker driver outputs, RCA adaptors for aftermarket head units and power connector, this amp was specially designed to be easy to install. No direct hook up to the vehicle‚Äôs battery is required. An optional ISO connector is available for ‚ÄúPlug&Play" connectivity via the head unit‚Äôs harness. Note: On certain cars, a harness adapter may be necessary. EXTREMELY VERSATILE To ensure compatibility with different head units, this amplifier features a 2-channel or 4-channel input selector switch. Most of all, Impulse 4.320 has been designed to power front and rear speaker drivers. However, it can also be used in a 3-channel or 2-channel mode in order to meet all needs for improving small installations and it can also be used for powering the front speaker drivers and a small subwoofer. Each pair of channels features an active crossover to adapt the sonic response according to the speaker drivers used. The front channels can be used for wideband speaker drivers or the high-pass filter can be used for frequencies above 75 Hz when only small speaker drivers are used. By avoiding having small speaker drivers reproduce very low frequencies, the sound will have more clarity. The rear channels are equipped with an active crossover (wideband, high-pass or low-pass) and with progressive phase adjustment for powering a small subwoofer or wideband speaker drivers of different sizes. "Y" Adapter cable – FOCAL IMPULSE 4.320 cable kit for quick connection of Impulse amplifier in vehicles with ISO Standard wiring connectors behind the head unit. Simply unplug the ISO plug and connect this cable kit inline (with the Impulse amp) for an immediate improvement in power and sound quality. Easy Plug and Play installation No soldering – Direct IMPULSE 4.320 connection to your original manufacturer head unit No modification of the original manufacturer equipment WHAT MAKES THE DIFFERENCE Far more powerful than a head unit Easy integration within the dashboard Compatible with all head units Extremely versatile Optional ISO connector for semi "Plug&Play" set-ups

4-Channel Compact Digital Amplifier Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. Semi "Plug&Play", Impulse 4.320 is a miniature 4-channel digital amplifier delivering 4 x 55 Watts. Impulse 4.320 is the perfect complement for your Focal Integration speaker drivers. TECHNOLOGY PLATFORM FROM FD AMPLIFIERS The technology used for Impulse 4.320 was inspired by the Performance range‚Äôs FD amplifiers. With an efficiency of more than 90%, Class D amplification has numerous advantages: less heat, low power consumption, low distortion at high volumes, compact… With the Impulse 4.320 amplifier, an unbeatable size/power ratio has been achieved. It delivers 4 x 55 or 2 x 160 Watts RMS at 4 Ohms. Thanks to the adequate power and the fast attack for realistic and more aerated sound, it will completely transform the sound of your front and rear speaker drivers. VERY EASY TO INSTALL AND PERFECT INTEGRATION Impulse 4.320 – Cables Measuring only 6-7/8 x 1-7/8 x 2-5/8" (17.65 x 4.6 x 6.7 cm) Impulse 4.320 can easily be concealed within the dashboard or the centre console. Equipped with high-level (automatic detection feature) and low-level inputs, it is compatible with all head units. Supplied with all fastenings, an adaptor for the head unit‚Äôs speaker driver outputs, RCA adaptors for aftermarket head units and power connector, this amp was specially designed to be easy to install. No direct hook up to the vehicle‚Äôs battery is required. An optional ISO connector is available for ‚ÄúPlug&Play" connectivity via the head unit‚Äôs harness. Note: On certain cars, a harness adapter may be necessary. EXTREMELY VERSATILE To ensure compatibility with different head units, this amplifier features a 2-channel or 4-channel input selector switch. Most of all, Impulse 4.320 has been designed to power front and rear speaker drivers. However, it can also be used in a 3-channel or 2-channel mode in order to meet all needs for improving small installations and it can also be used for powering the front speaker drivers and a small subwoofer. Each pair of channels features an active crossover to adapt the sonic response according to the speaker drivers used. The front channels can be used for wideband speaker drivers or the high-pass filter can be used for frequencies above 75 Hz when only small speaker drivers are used. By avoiding having small speaker drivers reproduce very low frequencies, the sound will have more clarity. The rear channels are equipped with an active crossover (wideband, high-pass or low-pass) and with progressive phase adjustment for powering a small subwoofer or wideband speaker drivers of different sizes. "Y" Adapter cable – FOCAL IMPULSE 4.320 cable kit for quick connection of Impulse amplifier in vehicles with ISO Standard wiring connectors behind the head unit. Simply unplug the ISO plug and connect this cable kit inline (with the Impulse amp) for an immediate improvement in power and sound quality. Easy Plug and Play installation No soldering – Direct IMPULSE 4.320 connection to your original manufacturer head unit No modification of the original manufacturer equipment WHAT MAKES THE DIFFERENCE Far more powerful than a head unit Easy integration within the dashboard Compatible with all head units Extremely versatile Optional ISO connector for semi "Plug&Play" set-ups Extension IO Harness 1.5m Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: "Input" to send the audio signal from the main unit to the amplifier and "output" to send the signal leaving the amplifier to the original audio system. Developed with twisted cables to effectively eliminate disturbance Three different lengths to suit all vehicles Cut-resistant protective shield Great flexibility for the easiest possible installation Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320 No soldering required Length: 5ft (1,50m) Impulse Toyota Amplifier Y-Harness The Focal Inside TOYOTA Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original head unit and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 0.9ft (0.3m) Compatibility: for Toyota vehicles since 2005

W6v3 12-inch Subwoofer (600 W, dual 4 Ω voice coils)   If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. The 12W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. Greater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver. General Specifications Continuous Power Handling (RMS) 600 W Recommended Amplifier Power (RMS) 200 - 600 W Nominal Impedance (Znom) Dual 4 Ω Physical Specifications Nominal Diameter 12.0 in / 300 mm Overall Diameter (A) 12.5 in / 318 mm Mounting Hole Diameter (B) 11.02 in / 280 mm Bolt Hole Circle Diameter (C) 11.86 in / 301 mm Motor Outer Diameter (D) 7.0 in / 178 mm Mounting Depth (E) 7.52 in / 191 mm Required Pole Vent Clearance 0.50 in / 13 mm Driver Displacement 0.105 cu ft / 2.97 L Net Weight 25.6 lb / 11.6 kg Parameters Free Air Resonance (Fs) 26.919 Hz Electrical “Q” (Qes) 0.487 Mechanical “Q” (Qms) 9.365 Total Speaker “Q” (Qts) 0.463 Equivalent Compliance (Vas) 1.920 cu ft / 54.37 L One-Way Linear Excursion (Xmax)* 0.75 in / 19 mm Reference Efficiency (no) 0.11% Efficiency (1 W / 1 m)** 85.4 dB SPL Effective Piston Area (Sd) 75.338 sq in / 0.0486 sq m DC Resistance (Re)*** 6.493 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same. Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.0 cu ft / 28.3 L External Width (W) 15 in / 381 mm External Height (H) 15 in / 381 mm External Depth (D) 12 in / 305 mm F3 41.62 Hz Fc 45.99 Hz Qtc 0.7912 Download detailed sealed enclosure information Enclosure Notes* The W6v3’s employ a pole vent to remove heat and pressure from the inside of the speaker. This vent is located around the JL Audio badge at the rear of the speaker. A minimum distance of 0.5 in (13 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.* The enclosure recommendations listed are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.3 cu ft / 36.8 L External Width (W) 27 in / 686 mm External Height (H) 14 in / 356 mm External Depth (D) 12.5 in / 318 mm Internal Slot Port Width (SW) 1.75 in / 44 mm Internal Slot Port Height (SH) 12.5 in / 318 mm Internal Slot Port Length (SL) 37.125 in / 943 mm Port Extension Length (EL) 21.250 in / 540 mm Tuning Frequency (Fb) 33 Hz F3 31 Hz Download detailed ported enclosure information Enclosure Notes* The W6v3’s employ a pole vent to remove heat and pressure from the inside of the speaker. A minimum distance of 0.5 in (13 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.* The enclosure recommendations listed are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

6.5" (165 mm) Component Woofer (with Grille) Born from shared technologies used in our flagship C7 speakers, the C6-650cw component woofer benefits from vast woofer design experience and advanced modeling systems of JL Audio. Ideal for active systems, the C6-650cw component woofer features a proprietary cast alloy frame outfitted with our Elevated Frame Cooling™ technology and a DMA-optimized motor system to generate outstanding midbass impact with ultralow distortion. Passive crossover networks are not included with C6 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning digital signal processor, such as the JL Audio TwK® DSP, or a VXi amplifier with built-in DSP, with a dedicated amplifier channel for each C6 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance. C6-650cw Component Woofer Features:• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels• Cast alloy frame with our Elevated Frame Cooling feature• Includes fine mesh grille Design Bandwidth:With 48 dB/octave filters: 55 Hz-6 kHzWith 24 dB/octave filters: 65 Hz-6 kHzWith 12 dB/octave filters: 80 Hz-6 kHz Component woofers are sold individually and include a plastic grille tray, one fine steel mesh grille and one electroformed JL Audio badge logo. General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 87.37 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 55 Hz - 6 KHz ± 3 dB Woofer Physical Specifications Frame Outer Diameter* (A) 6.50 in / 165 mm Grille Tray Outer Diameter** (B) 6.76 in / 172 mm Motor Outer Diameter (C) 3.54 in / 90 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion*** (E) 1 in / 25 mm Mounting Hole Diameter (F) 5.46 in / 139 mm Mounting Depth (G) 2.60 in / 66 mm *Does not take into account mounting tabs**Does not take into account logo badge***Frontal grille protrusion measured from mounting surface

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles. The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter. Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 70 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 125 W / Ch. System Efficiency 93 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 53 Hz - 22 KHz ± 3 dB

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs. The C2-400x system features 4-inch (100 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. Breakaway mounting tabs on the woofer frame allow the C2-400x to be installed in four-hole or two-hole configurations. Injection-moulded adaptor plates are also included to allow mounting of the C2-400x speakers into a 4 x 6 (100 x 150 mm) speaker location. Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles. Speaker grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 35 W Peak Music Power 105 W Recommended Amplifier Power (RMS) 10 - 50 W / Ch. System Efficiency 84.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 71 Hz - 22 KHz ± 3 dB

The 12W7AE brings serious performance to the table by combining the breakthrough of the long-excursion W7 design with a large 12-inch bore. It has been called "addictive," "seductive" and "the new subwoofer reference", by some of the world's toughest reviewers, and has earned these accolades by delivering nearly limitless dynamics, exceptional balance and world-class sound quality. This potent driver is best used with amplifier power in the 400W - 1000W range and is optimized to operate in a 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure. W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but are they distinguished by the following cosmetic differences: Satin-Black Powdercoated Baskets Bright Anodized Surround Clamp Ring Anniversary Edition Cone Badge Anniversary Edition Terminal Label Continuous Power Handling (RMS) 1000 W Recommended Amplifier Power (RMS) 400 - 1000 W Nominal Impedance (Znom) 3 Ω

Elevate your factory audio system to an entirely new level with Alpine’s ‘direct-fit’ premium speaker upgrade to suit Toyota Hilux. Exclusively designed by Alpine, the tweeter housing achieves superior sound quality, as well as optimises staging and imaging. With its striking appearance and premium finishes inclusive of a machine finished metal Alpine emblem and ornate black chrome and metal ring accents to instantly enhance your in cabin aesthetic. The Alpine engineered and manufactured high-quality speaker housings ensures uncompromised sound performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Whatsmore, S-Series continues to establish the benchmark in sound quality and value by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth allowing the 1” soft dome tweeters come alive in the upper harmonics, delivering an incredibly smooth and detailed high frequency response that’s extended right up to 40kHz — so you can hear the finest nuances in your music. Take Hilux sound to the next-level with the new Hi-Resolution S-Series Premium Sound Solution. AN ALL-NEW AUDIOPHILE EXPERIENCE FOR S-SERIES What is Hi-Res Audio? With Hi-Res Audio streaming services and music downloads available you can now appreciate a higher sampling rate than in CD’s for the playback of music, which brings your favourite music tracks to life with extreme clarity. Alpine’s Hi-Res Audio Certified Head Units, Amplifiers and Digital Signal Processors are painstaking engineered to deliver faithful audio reproduction from high resolution sources and recordings with sample rates up to 192kHz/24Bit. These components are optimised for high definition playback and breathtaking performance, true to the artists original recording. Why Hi-Res Audio? Listening to Hi-Resolution Audio allows you to feel every emotion and hear every nuance; every detail of your favourite artist’s original studio performance is reproduced to perfection. Hi-Res Audio provides absolutely no distortion for the ultimate listening experience. Why Hi-Res Audio Certified Speakers? Hi-Res Audio goes beyond the limits of ordinary speakers. To accurately render the sound of Hi-Resolution sound sources and recordings in true high definition the reproduction of an extended dynamic frequency range right up-to 40kHz is paramount. Hi-Res Audio Certified All-New for S-Series, Hi-Res Audio Certification brings a whole new dimension of sonic excellence to your everyday drive. With an impressive extended dynamic range, playing upper harmonics all the way up to 40kHz, your tracks will come alive with a level of detail and nuance faithful to that of the original recording. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housings are made from premium injection moulded PC/ABS polymer and feature machine cut Alpine logo complimented by black chrome and machined metal accents which are all pre-assembled components ready for direct installation to suit your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Alpine Patented Technology for Superior Sound These speakers adopt a 35mm voice coil and a precision strontium magnet motor structure delivering extraordinary cone velocity for incredible linearity and powerful bass to get an exquisite listening and driving experience. Glass Fiber Composite Woofer Cone The woofer features an all-new glass fiber composite cone, which due to its directionally weaved construction is engineered to be far stronger than a traditional oval cone diaphragm. The resulting rigidity coupled to glass-fiber’s  lightness results in highly controlled cone excursion producing excellent audio reproduction. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass. Features Woofer 6.5″ (165mm) Lightweight Glass Fiber Composite Component Speaker HAMR (High Amplitude Multi-Roll) Surround Large 35mm Voice Coil Magnet Material: Strontium Ferrite Tweeter 1″ Extended-Range Soft Dome Magnet Material: Ferrite Application Type: Premium Direct-Fit OEM Replacement for Ranger Grill: Perforated Net Crossover Network Woofer: Copper Air-Coiled Wound Inductor Tweeter: High Quality Audio-Grade Polycap Power Handling Peak Power: 240 Watts RMS Power: 80 Watts (CTA-2031 Compliant) General Frequency Range: 55 Hz – 40 kHz Impedance: 4 Ohms Sensitivity: 88 dB/W Recommended Amplification: up to 80W RMS per channel

Elevate your factory audio system to an entirely new level with Alpine’s ‘direct-fit’ premium speaker upgrade to suit Toyota Hilux. Exclusively designed by Alpine, the tweeter housing achieves superior sound quality, as well as optimises staging and imaging. With its striking appearance and premium finishes inclusive of a machine finished metal Alpine emblem and ornate black chrome and metal ring accents to instantly enhance your in cabin aesthetic. The Alpine engineered and manufactured high-quality speaker housings ensures uncompromised sound performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Whatsmore, S-Series continues to establish the benchmark in sound quality and value by producing impressively detailed loudspeakers that accurately represent true studio-level Hi-Resolution audio faithful across the entire frequency bandwidth allowing the 1” soft dome tweeters come alive in the upper harmonics, delivering an incredibly smooth and detailed high frequency response that’s extended right up to 40kHz — so you can hear the finest nuances in your music. Take Hilux sound to the next-level with the new Hi-Resolution S-Series Premium Sound Solution. AN ALL-NEW AUDIOPHILE EXPERIENCE FOR S-SERIES What is Hi-Res Audio? With Hi-Res Audio streaming services and music downloads available you can now appreciate a higher sampling rate than in CD’s for the playback of music, which brings your favourite music tracks to life with extreme clarity. Alpine’s Hi-Res Audio Certified Head Units, Amplifiers and Digital Signal Processors are painstaking engineered to deliver faithful audio reproduction from high resolution sources and recordings with sample rates up to 192kHz/24Bit. These components are optimised for high definition playback and breathtaking performance, true to the artists original recording. Why Hi-Res Audio? Listening to Hi-Resolution Audio allows you to feel every emotion and hear every nuance; every detail of your favourite artist’s original studio performance is reproduced to perfection. Hi-Res Audio provides absolutely no distortion for the ultimate listening experience. Why Hi-Res Audio Certified Speakers? Hi-Res Audio goes beyond the limits of ordinary speakers. To accurately render the sound of Hi-Resolution sound sources and recordings in true high definition the reproduction of an extended dynamic frequency range right up-to 40kHz is paramount. Hi-Res Audio Certified All-New for S-Series, Hi-Res Audio Certification brings a whole new dimension of sonic excellence to your everyday drive. With an impressive extended dynamic range, playing upper harmonics all the way up to 40kHz, your tracks will come alive with a level of detail and nuance faithful to that of the original recording. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housings are made from premium injection moulded PC/ABS polymer and feature machine cut Alpine logo complimented by black chrome and machined metal accents which are all pre-assembled components ready for direct installation to suit your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Alpine Patented Technology for Superior Sound These speakers adopt a 35mm voice coil and a precision strontium magnet motor structure delivering extraordinary cone velocity for incredible linearity and powerful bass to get an exquisite listening and driving experience. Glass Fiber Composite Woofer Cone The woofer features an all-new glass fiber composite cone, which due to its directionally weaved construction is engineered to be far stronger than a traditional oval cone diaphragm. The resulting rigidity coupled to glass-fiber’s  lightness results in highly controlled cone excursion producing excellent audio reproduction. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass. Features Woofer 6.5″ (165mm) Lightweight Glass Fiber Composite Component Speaker HAMR (High Amplitude Multi-Roll) Surround Large 35mm Voice Coil Magnet Material: Strontium Ferrite Tweeter 1″ Extended-Range Soft Dome Magnet Material: Ferrite Application Type: Premium Direct-Fit OEM Replacement for Ranger Grill: Perforated Net Crossover Network Woofer: Copper Air-Coiled Wound Inductor Tweeter: High Quality Audio-Grade Polycap Power Handling Peak Power: 240 Watts RMS Power: 80 Watts (CTA-2031 Compliant) General Frequency Range: 55 Hz – 40 kHz Impedance: 4 Ohms Sensitivity: 88 dB/W Recommended Amplification: up to 80W RMS per channel

This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 6W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. GENERAL SPECIFICATIONS: Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on the front baffle Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 50 – 150W Nominal Impedance: 4 Ω Continuous Power Handling (RMS) 150 W Enclosure Type Slot-ported, Low-profile Finish Black carpet Grille Included Black Steel Mesh External Width (W) 14.125 in / 359 mm External Height (H) 9.625 in / 245 mm External Depth (D1) 5.125 in / 130 mm Net Weight 12 lb / 5.44 kg

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. The VX1000/1i monoblock subwoofer amplifier outputs up to 600 watts into 4 ohms, or a jaw-dropping 1000 watts into 2 ohms. A specialized, low-frequency version of our NexD2™ amplifier technology delivers rock-solid bass performance and fidelity, with outstanding efficiency. Compact dimensions with all connections placed on one side, via mating plugs, greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. INCLUSIONS: Power Connector (for 2 AWG wire) Analog Input/Pre-Out Harness Subwoofer Output Connector 6 ft A/B USB Cable

JL AUDIO CS110LG-TW3 SINGLE 10TW3 POWERWEDGE, SEALED, 2 Ω Product highlights • Peak Power Handling: 800W • RMS Power Handling: 400W • Dual 4 Ohm Voice Coils • Sealed Enclosure w/ Black Carpet Finish • 5/8" MDF Construction Subwoofer Features: 10" 2 ohm TW3 subwoofer driver Power Handling: Peak: 800 watts RMS: 400 watts Impedance: 2 ohms Mica-filled injection molded polypropylene cone Rubber woofer surround Dual 4 ohm voice coils Frequency response: 22-200 Hz Sensitivity: 82dB Comes with black steel mesh grille 2 Year Manufacturer's Warranty General Enclosure Features: Subwoofer mounting depth: 3-1/2" Subwoofer cutout diameter: 11-5/8" 5/8" MDF construction Sealed enclosure Black carpet covered cabinet One pair of 5-way binding posts on the left side of the enclosure Nickel plated push terminals Dimensions: 5-1/8"D x 6-5/8"D w/ grille x 21"W x 15-3/8"H

IW-IMP-EXT150 Impulse amp cable kit, facilitates quick install of Impulse amps to vehicles via ISO plugs Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.    Developed with twisted cables to effectively eliminate disturbance Three different lengths to suit all vehicles Cut-resistant protective shield Great flexibility for the easiest possible installation Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320 No soldering required Length: 5ft (1,50m)

R2-Series Premium Speaker System Suitable for Single-Cab LandCruiser 78 & 79 Series Turn up the bass in your Single-Cab 70 Series — the next Generation R-Series are born to be played loud with the all-new R-Series ‘direct fit’ premium aftermarket speaker upgrade. Alpine’s premium sound solution has been engineered to provide rock solid durability and good looks, with amazing sound and clarity. Equipped with Alpine’s huge R2-Series 6×9” speakers, experience punchy, concise bass as well as uncompromised sound performance and richness possible through Hi-Res Audio certification. Comfort and Convenience have not been forgotten. The LC70-269SC-R houses drink compartments capable of holding a 1.25 litre bottle to a 375ml can – including large pockets to hold maps, tablets, or books. For technological needs, there are USB charge ports in both door pods that allow charging of up to 4 devices at once. Built-in puddle lights also help light the way, assisting vehicle exits in unfamiliar situations. Formed from injection-moulded and highly-resistant PC/ABS polymers, each part is highly durable and structured to withstand almost anything life throws at it. The sleek yet tough design of the LC70-269SC-R elevates the interior aesthetic whilst honouring the rugged history of the vehicle itself. The updated LC70-269SC-R is the pinnacle of Hi-Fi sound performance, design and practicality. A must have accessory to ultimate 21st century off-road lifestyle. Perfect Integration Alpine’s premium sound upgrade for LC70 Series (Single Cab) is the complete audiophile and lifestyle solution. The huge 6×9-inch R2-Series speakers not only sound great, but also provide clean and concise bass performance. Alpine’s LC70-269SC-R combines rugged looks with subtle design cues from the vehicle itself to create a factory-look product for the 21st century. Light Up The Outdoors Avoid getting messy in the mud. Alpine’s puddle light is designed for all your outdoor adventures, illuminating the ground underneath and drawing attention at night. Never have to worry about muddy puddles again, as the ground will be lit up in style. Highly Durable Tough Grille  Without compromise, these flush-fit integrated speaker grilles have been engineered from a strong PC/ABS polymer blend, ensuring high durability and abrasion resistance. A high-gloss black Alpine emblem adorns the grille, providing a striking contrast and premium finish to each door. 4x USB Charging Ports The on-board USB inputs sit discreetly yet elegantly within the speaker pod design, allowing up to 4 devices such as a tablet or smartphone to charge at any one time. This provides a convenient USB charge point at each door, such as the front driver door, front passenger door, rear passenger left and right door. Premium Design Tweeter Housing LandCruiser 70 Series never looked so good. The bold design of the tweeter housing fits into the top dash corners directly replacing the OEM dash trim panels, providing perfect integration with an OEM look. With the tweeters up on the dashboard, the sound image is up high where it should be and overall sounds incredible. Carry Your Life With You Alpine’s design for the LC70 Series integrates a number of convenient necessities. Meticulously designed to accommodate both large bottles and small cans, as well as maps, tablets and almost anything else that will fit. Alpine’s 70 Series speaker solution is ready for your next adventure. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB.   FEATURES Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design SPECIFICATIONS General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 60Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 160mm x 240mm Woofer Diameter (in): 6″ x 9″ Woofer Mounting Diameter (mm): 167mm Woofer Mounting Diameter (in): 6-19/32″ Woofer Mounting Depth (mm): 75mm Woofer Mounting Depth (in): 3″ COMPATIBILITY Compatible with LandCruiser VDJ 76, 78 & 79 2009> onwards (Single-Cab Only)

The smoothness and transparency of a high-end silk dome tweeter combine with top-flight component woofer performance to create a loudspeaker system with exceptional refinement and dynamic capability. The C5-650 component system features 6.5-inch (165 mm) component woofers with die-cast alloy baskets and Kurt Müller cones and suspensions. This woofer benefits from JL Audio’s vast woofer design experience and advanced modelling systems. The C5 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off-axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. The flush-mount fixtures feature our RSR (Ratcheting Swivel Rotation) mechanism to allow precise tweeter aiming after installation. C5 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 100 W Peak Music Power: 200 W Recommended Amplifier Power (RMS): 50 - 150 W / Ch. Nominal Impedance: 4 Ω Frequency Response: 300 Hz - 10 KHz ± 3 dB Voice Coil Resistance (Re): 3.245 Ω Frame Outer Diameter (A): 3.45 in / 88 mm Bolt Hole Circle Diameter (B): 3.15 in / 80 mm Mounting Hole Diameter (C): 2.87 in / 73 mm Grille Tray Outer Diameter (D): 3.95 in / 100 mm Frontal Grille Protrusion (E): 0.58 in / 15 mm Mounting Depth (F): 1.46 in / 37 mm Motor Outer Diameter (G): 2.36 in / 60 mm

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-525 system features 5.25-inch (130 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

JIMNY RE-STYLE | EXTERIOR Metio Premium Audio For Jimny 2018 > 3Dr Jimny 150W Peak Power 50W RMS 4Ω 5cm Roof Speaker with Gunmetal Grille 16.5cm Door Woofers High Quality Crossover Network Mounting Accessories

R2-Series Front and Rear Premium Speaker System Suitable for Ford Ranger PXII / PX III Turn up the bass in your Ford Ranger — the next Generation R-Series are born to be played loud with Alpine’s all-new R-Series ‘direct fit’ premium speaker upgrade. Equipped with Alpine’s exclusively designed tweeter housing superior sound quality is achieved, all-while your cabin space is enhanced with its striking appearance and premium finishes inclusive of a machine finished metal Alpine logo and contrasting black chrome accent. Alpine engineered and reborn from the ground up, the all-new R-Series speaker housings unites true Hi-Fi sound quality and ultra-bass performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housing with a machine cut Alpine logo and an elegant black chrome bezel which are all pre-assembled parts ready for direct installation to your Ford Ranger. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters housed within the centre of the speaker and tweeter delivers an ultra-clear, yet highly detailed and smooth response. They play right up to 40kHz allowing harmonics to reveal the finest of nuances for an authentic sound experience, faithfully to the original recording. Direct Fit Installation All speakers interface directly to the OEM, providing a quick and easy ‘plug-n-play’ connection. This means there is no need to cut, solder or modify any of the vehicle’s original wiring — saving you time by easily utilising the original speaker wires, allowing for a straight and simple installation. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB.   Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Swivel Application allowing the sound to be focused for the best in-car sound performance Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design Specifications General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 65Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Swivel Tweeters Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 165mm Woofer Diameter (in): 6-1/2″ Woofer Mounting Diameter (mm): 176mm Woofer Mounting Diameter (in): 6-15/16″ Woofer Mounting Depth (mm): 59mm Woofer Mounting Depth (in): 2-3/8″  

Multi-Camera Selector Interface The latest Alpine innovation brings you an interface allowing for connection of up to three Alpine direct connection cameras. The KCX-C250MC is compatible with our latest Alpine head units featuring direct camera input, such as the iLX-702D, INE-W977A, INE-W710D, X208AU, X802D-U and the X902D-F. Alpine front, rear and side cameras can be controlled and set up via the head unit screen. With the latest premium navigation, there is no need to use a separate controller to control all your camera views and select a different camera to view. Simply select from the navigation stations touchscreen with compatible multi-view cameras, or engage reverse gear to trigger the rear view camera. With this solution you have various options to greatly expand the vehicles visibility levels and safety, making parking and reversing a breeze. Your options include the ability to add an additional camera to the rear of a trailer or a customised side camera installation. Please note this is just an interface allowing for the connection of Alpine cameras, no cameras are included. Technical Specifications Features Required to connect more than one camera sources to your Alpine system 3 inputs compatible with up to three select Alpine Direct Cameras Select camera view from receivers touchscreen  Includes required video and power cables

The Alpine DP-65C features a sleek, minimalist design that is stylish and functional. It utilises a carbon fibre woven diaphragm and aluminium materials, showcasing a sophisticated visual aesthetic and tactile texture. The next generation of Premium Speakers from Alpine. Alpine meticulously engineered the DP-65C Digital Precision (DP) Series speakers with precision to create a high-performance audio experience. Featuring a custom-designed machine-finished aluminium cast frame and an elegant backplate housing, these speakers also boast an industry-first blue-accented woven carbon fibre hybrid woofer diaphragm and a tweeter with an exotic magnesium alloy dome for exceptional high-frequency detail. The Alpine DP-65C's external crossover was designed using custom parts and air-core inductors to enhance sound transparency and achieve a seamless transition between high and low frequencies. These cutting-edge loudspeakers have a stunning aesthetic design and deliver an acoustic performance that matches their high-performance capabilities. Alpine engineered the DP-65C to accurately reproduce the dynamics of digital sound sources and recordings, providing an incredibly detailed high and mid-range response and powerful, controlled bass. This allows you to fully immerse yourself in the music, experiencing every nuance and richness of sound with precision and clarity. The DP series represents the perfect combination of precision design and exceptional sound performance. The first use of the new diaphragm material "Hybrid fibre.” Using carbon fibre in audio equipment has enhanced the richness and depth of low-frequency sounds, providing a more immersive listening experience. These unique properties work harmoniously to deliver a superior audio experience, ensuring every note is crisp and clear. By utilising a bass unit with a unified diaphragm material, the midtones achieve a seamless blend of sound sources across a broad spectrum. The hybrid woofer diaphragm, woven with carbon fibre, is rigid yet lightweight. This design ensures precise cone velocity and minimal distortion, resulting in a natural and highly detailed mid-range response with powerful bass extension. The speaker's appearance is stunning! With its sleek design and top-notch sound quality, this speaker is truly a showstopper. You won't be disappointed with this powerhouse of a speaker!   Magnesium Alloy Tweeter  The Magnesium alloy dome Tweeter Diaphragm is Lightweight and durable, effectively Preventing Distortion and Uncovering the subtle Nuances of music. This feature delivers a highly detailed and smooth high frequency response. The Magnesium alloy material can withstand high temperatures within a car, guaranteeing longevity without any degradation in performance. The aluminium-magnesium alloy tweeter accurately reproduces the intricate and celestial sounds musical instruments produce.   Aluminium Frame and Gold Plated Terminals  Precision-manufactured, the Aluminium frame is rigid for low Resonance and has six Mounting points for Optimised bass Coupling and Midrange response. The machine turned front and stunning back plate cover provide a classy finish, and the gold plated Terminals prevent connection Degradation. Low resistance with High Fidelity   HAMR Surround The Alpine's unique technology, H.A.M.R. (High Amplitude Multi-Roll) surround, adapts from a superior sound system, increasing output and superb sound quality. Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone travel for high SPL. The HAMR surround controls the cone for powerful bass and pure sound at any stage.     High-Quality Crossover The Alpine DP-65C Crossover has premium components like air core Inductors and Alpine Poly-Capacitors for precise electrical Clearance. This provides a clean signal path with a Seamless transition from high to low frequencies for premium audio performance.      6.5″ Honeycomb Grilles (Optional DP-65G) Enhance your high class show level system with the Alpine DP-65G woofer grilles (pair). The grilles have a Honeycomb design that matches the tweeter grille. Enhancing the look of your speaker system. Elevate the look of your setup with these stylish additions.     Speaker type 2-WAY COMPONENT SPEAKER   Frequency response 65Hz - 24KHz   Power handling 240 Watts peak power 50 Watts RMS power   Design H.A.M.R surround   Material Hybrid fiber (bulletproof fiber and carbon fiber) The aluminum-magnesium alloy tweeter Gold-plated terminals corrosion-resistant   Dimension Woofer mounting diameter : 165 mm Woofer mounting depth : 59 mm Network Width : 51.9mm Network Height : 30.9mm

Enhance Your Ford Ranger PXII/PXIII with R2-Series Premium Front and Rear Speaker System Upgrade Your Ford Ranger's Audio System with Alpine's R-Series Premium Speaker System - Direct Fit for PXII/PXIII Models" Revamp your driving experience with Alpine's R-Series premium speaker system, the perfect upgrade for your Ford Ranger PXII/PXIII. With a sleek design and superior sound quality, the R-Series speakers are engineered to elevate your music listening experience. Alpine's exclusive tweeter housing design is crafted for maximum sound performance and a striking appearance. The machine-finished metal Alpine logo and contrasting black chrome accent add a touch of elegance to your cabin space. The R-Series speaker system is designed for a precise and direct replacement of the factory-installed speakers, with a "plug-n-play" connection that requires no modifications, cutting of wires, or soldering. You can upgrade your audio system quickly and easily without any hassle. The speakers feature a Hi-Res Audio certified hard dome tweeter, delivering ultra-clear and highly detailed sound with a smooth response up to 40kHz. The larger magnet structure ensures incredible bass performance without compromising the driver depth. The midrange and woofer drivers have an all-new glass-fibre reinforced cone for exceptional rigidity and lightweight construction, resulting in accurate music reproduction. The exclusive HAMR surround provides powerful bass and pure sound at any excursion stage. Alpine's high-pass X-Over network is easy to install, allowing you to adjust the tweeter level by -3dB / 0dB / +3dB. The R-Series speaker system is the perfect integration of premium design and superior sound quality, providing a seamless upgrade to your Ford Ranger's audio system.

8-Input Accessory Controller Module Simplify and declutter your vehicle’s dashboard by controlling accessories like winches, spotlights, light bars, or even air suspension directly from your Alpine touchscreen! The KAC-001 Accessory Control Module transforms your compatible Alpine Display Audio Receiver into a central hub for managing a variety of 12V electrical accessories. With eight individual outputs, you can control relay-connected accessories configured as Pulsed, Latched, or Momentary Outputs. Additionally, you can customise graphical icons and names for each accessory for easy identification on your screen. *While the KAC-001 doesn’t need a Maestro module to operate, it does require a Maestro-compatible head unit, such as the iLX-F511Ai, iLX-F509Ai, or iLX-507Ai.

Turn up the bass in your Toyota Hilux — the next Generation R-Series are born to be played loud with Alpine’s all-new R-Series ‘direct fit’ premium speaker upgrade. Equipped with Alpine’s exclusively designed tweeter housing superior sound quality is achieved, all-while your cabin space is enhanced with its striking appearance and premium finishes inclusive of a machine finished metal Alpine logo and contrasting black chrome accent. Alpine engineered and reborn from the ground up, the all-new R-Series speaker housings unites true Hi-Fi sound quality and ultra-bass performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housing with a machine cut Alpine logo and an elegant black chrome bezel which are all pre-assembled parts ready for direct installation to your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters housed within the centre of the speaker and tweeter delivers an ultra-clear, yet highly detailed and smooth response. They play right up to 40kHz allowing harmonics to reveal the finest of nuances for an authentic sound experience, faithfully to the original recording. Direct Fit Installation All speakers interface directly to the OEM, providing a quick and easy ‘plug-n-play’ connection. This means there is no need to cut, solder or modify any of the vehicle’s original wiring — saving you time by easily utilising the original speaker wires, allowing for a straight and simple installation. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. Features Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Swivel Application allowing the sound to be focused for the best in-car sound performance Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 65Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Swivel Tweeters Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 165mm Woofer Diameter (in): 6-1/2″ Woofer Mounting Diameter (mm): 176mm Woofer Mounting Diameter (in): 6-15/16″ Woofer Mounting Depth (mm): 59mm Woofer Mounting Depth (in): 2-3/8″

ISUB ACTIVE 2.1 2-channel amplifier The ISUB ACTIVE 2.1 subwoofer complements any original audio system, providing powerful (260 W), dynamic bass and amplification of the vehicle's front channels (2.1). It connects to the car radio's speaker outputs via the supplied Plug & Play cable, providing a genuine enhancement of the sound experience without loss of space in the cabin or trunk. KEY POINTS Focal know-how 2-channel amplifier Ready to use (Plug & Play ISO cable included) Compact product, discreet integration Ease of use Various settings (adjustable incoming signal, adjustable amplifier crossover, sound level boost, etc.) Robust design Sound - Acoustics Product type : Ultracompact amplified 20cm (8 ") and 2 -channel amplified subwoofer Loudspeakers : Subwoofer: 8" Filter : Integrated Frequency response (+/- 3dB) : 45Hz - 150kHz Maximum power : 260 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 130 W RMS Sound - Electronics Number of channels : 2 Configurable High Pass / Low Pass filter : High-pass crossover ajustable from 20 to 50 Hz Low-pass crossover ajustable from 50 to 180 Hz RMS power : 130 W RMS

S2-Series Speaker System Suitable for Single-Cab LandCruiser 78 & 79 Series Turn up the volume in your Single-Cab 70 Series — the next Generation S-Series set the standard when it comes to phenomenal audio. Alpine’s premium sound solution for LC70 has been engineered to provide rock solid durability and good looks, with amazing sound and clarity. Equipped with Alpine’s huge S2-Series 6×9” speakers, experience clear, concise bass as well as best-in-class sound performance made possible through Hi-Res Audio certification. Comfort and Convenience have not been forgotten. The LC70-269SC-S houses drink compartments capable of holding a 1.25 litre bottle to a 375ml can – including large pockets to hold maps, tablets, or books. For technological needs, there are dual USB A & C charge ports in both door pods allowing charging of up to 4 devices at once. Built-in puddle lights also help light the way, assisting vehicle exits in unfamiliar situations. Formed from injection-moulded and highly-resistant PC/ABS polymers, each part is highly durable and structured to withstand almost anything life throws at it. The sleek yet tough design of the LC70-269SC-S elevates the interior aesthetic whilst honouring the rugged history of the vehicle itself. The updated LC70-269SC-S is the pinnacle of accessible sound performance, design and practicality. A must have accessory to ultimate 21st century off-road lifestyle. Perfect Integration Alpine’s premium sound upgrade for LC70 Series (Single Cab) is the complete audiophile and lifestyle solution. The huge 6×9-inch S2-Series speakers not only sound great, but also provide clean and concise bass performance. Alpine’s LC70-269SC-S combines rugged looks with subtle design cues from the vehicle itself to create a factory-look product for the 21st century. Light Up The Outdoors Avoid getting messy in the mud. Alpine’s puddle light is designed for all your outdoor adventures, illuminating the ground underneath and drawing attention at night. Never have to worry about muddy puddles again, as the ground will be lit up in style. Highly Durable Tough Grille  Without compromise, these flush-fit integrated speaker grilles have been engineered from a strong PC/ABS polymer blend, ensuring high durability and abrasion resistance. A high-gloss black Alpine emblem adorns the grille, providing a striking contrast and premium finish to each door. 2x USB-C / 2x USB-A Charging Ports The on-board USB inputs sit discreetly yet elegantly within the speaker pod design, allowing up to 4 devices such as a tablet or smartphone to charge at any one time. This provides a convenient USB charge point at each door, such as the front driver door, front passenger door, rear passenger left and right door. Premium Design Tweeter Housing LandCruiser 70 Series never looked so good. The bold design of the tweeter housing fits into the top dash corners directly replacing the OEM dash trim panels, providing perfect integration with an OEM look. With the tweeters up on the dashboard, the sound image is up high where it should be and overall sounds incredible. Carry Your Life With You Alpine’s design for the LC70 Series integrates a number of convenient necessities. Meticulously designed to accommodate both large bottles and small cans, as well as maps, tablets and almost anything else that will fit. Alpine’s 70 Series speaker solution is ready for your next adventure. Large Magnet Structure The large strontium magnets housed on the back of S-Series speakers mean business. Combined with large voice coils and Alpine’s patented HAMR Surrounds, increase cone excursion and the force of the driver to provide louder, punchier sound. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass.   FEATURES Front Tweeter 1″ Extended-Range Soft Dome Magnet Material: Neodymium Application Type: External/Swivel Tweeter Mounting Kit Flush mount and Collapsable for OEM fit. Grill: Perforated Net Front Woofer 6×9″ (160cm x 240cm) Lightweight Glass Fiber Composite Speaker HAMR (High Amplitude Multi-Roll) Surround Large 35mm Voice Coil Magnet Material: Strontium Ferrite Crossover Network Woofer: Copper Air-Coiled Wound Inductor Tweeter: High Grade Audio Poly Capacitor Crossover Network Woofer: Copper Air-Coiled Wound Inductor Tweeter: High Grade Audio Poly Capacitor   SPECIFICATIONS Power Handling Peak Power: 260 Watts RMS Power: 85 Watts (CTA-2031 Compliant) Dimensions Woofer  Frame 237 mm x 161mm Cutout Diameter: 242mm x 152mm Mounting Depth: 74.5 mm Mounting Height: 7.3 mm Magnet: 100.0 mm Dimensions Tweeter Frame: 58mm Mounting Diameter: 51mm Mounting Depth: 17.6mm Height: 25.6 mm   COMPATIBILITY Compatible with LandCruiser VDJ 76, 78 & 79 2009> onwards (Single-Cab Only)

Alpine Wireless Rotary Knob for Volume Control and Camera Select Designed to specifically work with Alpine’s next generation display audio head units, the RUE-BK01A connects wirelessly and installs directly to the iLX-511A and iLX-F509A. Complimenting the aesthetic design cues of Alpine’s Halo concept the control knob mounts directly to the Halo display. The Alpine Rotary Knob allows for easy and enjoyable adjustment of audio volume as well as the ability to toggle between your vehicle camera’s. Please note: This product contains a coin/button battery, please download and refer to the Owners Manual for warnings and instructions.  

The Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier, as well as the FIT 9.660 ultra-compact 9-channel amplifier/DSP. It allows the quick and simple connection of the BMW/MINI original head unit and of Focal Inside extension cables. * Compatibility: BMW and MINI vehicles between 2009 - 06/2019 - Compatibility to be checked with an installer. Additional Information Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 3.28ft (1 m)