Audio (Regular price)

GENERAL SPECIFICATIONSContinuous Power Handling (RMS): 600 WSystem Nominal Impedance: 2 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: NoPHYSICAL SPECIFICATIONSExternal Width (W): 31.375 in / 797 mmExternal Height (H): 15.18 in / 386 mmExternal Depth (D1)L 20.3 in / 516 mmExternal Top Surface Depth (D2): 15.75 in / 400 mmNet Weight: 60.3 lb / 27.35 kg

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. Component Tweeter Size mm (in.) 29 (1.14) Power Handling - Peak W 120 Power Handling - Peak Note (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 25 (1) Frequency Response Hz 1.4k ÷ 22.5k Magnet size D x d x h mm (in.) 24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14) Weight of one speaker kg (lb.) 0.07 (0.14) Magnet Neodymium Dome Tetolon D mm 29 Re Ohm 3,9 Fs Hz 1200 Le mH 0,02 Vas I - Mms g 0,17 Cms mm/N 0,1 BL T*m 1,6 Qts 0,55 Qes 1,98 Qms 0,57 Spl dB 91 A 44 mm 1.73 in. B 41 mm 1.61 in. C 27 mm 1.06 in. D 17 mm 0.67 in.

THE ESSENTIAL ACCESSORY SPEAKER DRIVER GRILLE This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.

FOCAL P25FSE SHALLOW 250MM / 560W SLIM SUBWOOFER In addition to its 560-watt power and its Flax cone for a natural sound, one of the key features of the P 25 FSE subwoofer is its slim design, making it light and even easier to install in your vehicle. Its built-in motor adds to its compactness, without compromising on the power delivered. Its robust shaped rubber surround allows impressive articulation, synonymous with extended frequency response and deep bass reproduction. Finally, the 1 1/2” (38mm) coil on glass fibre stand reduces overheating to guarantee perfectly adapted ventilation. P 25 FSE is the ideal compromise for ultra-compact sealed-box use (12 to 18L). KEY POINTS Unique, patented Flax cone “Dual Magnet” motor Made in France in the Focal workshops Slim design, even easier integration Power and precision THE FLAX CONE, EXPRESSIVE AND NATURAL This flax cone has been exclusively made in France by Focal since 2013. With its original design, it is 100% geared towards acoustic performance. This sandwich cone is formed of a flax fibre core placed between two thin sheets of glass fibre. Flax is a fibre with the unique ability to reproduce a very natural sound without colouration, with a rich reproduction in the midrange and clear bass strokes. Its lightness offers great dynamics, while its rigidity sustains the bass and provides good damping to deliver a faithful listening experience. Flax fibre is twice as light as glass fibre as it is hollow. Its very low elasticity makes it ideal for increasing the flexural rigidity module of a sandwich structure. SPECIFICATIONS Nominal power 280W RMS Maximum power 560W Sensitivity (2.83V/1m) 87dB Cone Flax Surround Rubber Nom. impedance 4Ω DC resistance 3.2Ω VC diameter 38mm 1.5" Former Glass fiber Layers 4 Wire Copper Net weight 3.5kg 7.7lbs Driver Displacement 2l 0.07cu.ft.  

ISUB ACTIVE 2.1 2-channel amplifier The ISUB ACTIVE 2.1 subwoofer complements any original audio system, providing powerful (260 W), dynamic bass and amplification of the vehicle's front channels (2.1). It connects to the car radio's speaker outputs via the supplied Plug & Play cable, providing a genuine enhancement of the sound experience without loss of space in the cabin or trunk. KEY POINTS Focal know-how 2-channel amplifier Ready to use (Plug & Play ISO cable included) Compact product, discreet integration Ease of use Various settings (adjustable incoming signal, adjustable amplifier crossover, sound level boost, etc.) Robust design Sound - Acoustics Product type : Ultracompact amplified 20cm (8 ") and 2 -channel amplified subwoofer Loudspeakers : Subwoofer: 8" Filter : Integrated Frequency response (+/- 3dB) : 45Hz - 150kHz Maximum power : 260 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 130 W RMS Sound - Electronics Number of channels : 2 Configurable High Pass / Low Pass filter : High-pass crossover ajustable from 20 to 50 Hz Low-pass crossover ajustable from 50 to 180 Hz RMS power : 130 W RMS

Slim fit, full sound Focal's Elite K2 Power Series ES 165 K2S component system is the culmination of Focal's passion for perfect sound. Focal's sound gurus engaged in intensive listening sessions designing this line of speakers so that you enjoy uncanny realism, sweeping dynamics, and breathtaking depth in your music. They also found some ways to make the woofers a little less deep, so they can fit into more vehicles. The system's 2-ohm impedance extracts maximum power from your amp so you'll get more punch from your system. A classic woofer with a twist The 6-1/2" woofer uses Focal's classic "W" sandwich cone design for incredibly accurate audio reproduction. The light foam core is sandwiched between responsive aramid fiber and fiberglass layers, so the woofer has the control needed to play delicate classical passages, yet will handle the power needed to drive your bass-heavy tracks with authority. Focal adds a Tuned Mass Damper (TMD®) butyl rubber surround to minimize harmonic distortion for the cleanest midrange possible. In addition to sweet-sounding tweeters and woofers, this system includes crossovers with adjustments for the tweeter level and crossover slopes. A redesigned tweeter The separate aramid fiber tweeter employs a unique "M"-shaped inverted dome design that disperses the highs with remarkable precision, all the way up to 22,000 Hz. The K2 Power crossovers use hand-made components developed by Focal to deliver an ideal blend of the highs and lows for a dynamic stereo image. They also include controls for a treble boost, a 3-level bass setting, and two crossover slopes — all so you can dial in the sound to your car's environment. Product highlights: component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 external crossovers, and hardware K2 aramid fiber sandwich woofer cone Tuned Mass Damper (TMD®) butyl rubber surround TKME "M"-shaped inverted-dome tweeter made of aramid fiber 2-way external crossover with tweeter, woofer, and crossover slope settings 2-ohm impedance power handling: 70 watts RMS (140 watts peak power) frequency response: 60-22,000 Hz sensitivity: 88 dB at 2.83V woofer top mounting depth: 2.285" woofer and tweeter aluminum grilles included flush- and surface-mount tweeter brackets included warranty: 1 year MFR # ES165K2S Item # 091ES16K2S What's in the box: Two woofers Focal owner's manual Two inverted dome tweeters (with attached 18" length of speaker wire) 2 Crossovers 2 Tweeter flush trim rings (installed) 2 Tweeter angled surface mount cups 2 Dome protective washers 2 Tweeter grilles (installed) 2 Woofer grilles 2 Woofer grille mounting rings 2 Woofer gaskets 8 Speed clips Four 3/4" Screws Eight 1-1/8" Screws Quick start guide 2 Focal window stickers Features & specs General Speaker Size 6 1/2 Design 2-way Tweeter Design M-Shaped Inverted Dome Impedance (Ohms) 2 Tweeter Composition Aramid Fiber Woofer Composition Aramid Fiber/Glass/Kevlar Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 88 Frequency Response 60 - 22k Hz Minimum RMS Wattage --- Maximum RMS Wattage 70 Peak Power Handling (Watts) 140 Top-mount Depth (Inches) 2 5/16 Bottom-mount Depth (Inches) 2 1/2 Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.43 Frame Width 6.49 Frame Length 6.49

FOCAL BAMXXXL Acoustic Absorption & Sound-dampening Material (Bulk Pack | 0.5mx6m) Soundproof your car Attenuates the speaker back wave Increases the bass level in your car Increases the soundproofing of outside noise This acoustic insulation kit is completing and essential to a quality car audio installation. From its use depends on optimum acoustic rendering of speakers, amplifiers and installed accessories. Technical materials made of honeycombed damping material, an Aluminum sheet and a viscoelastic complex (Butyl). Honeycombed damping material Just like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and thus increases the speaker performance. Aluminium sheet Aluminium provides rigidity to the Butyl/foam couple. This rigidity also permits the easy laying of BAM in difficult locations. Viscoelastic complex Self-adhesive, the Butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car.

The Focal Inside head unit adaptation cable for RENAULT/DACIA Y-ISO HARNESS is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Renault/Dacia original head unit and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 0.9ft (0.3m) Compatibility: for Renault and Dacia vehicles since 2000 

The speaker drivers from the PS 165 F3E kit combine the best of Flax technology with the latest Focal innovations to deliver one of the most natural sounds. The TMD surround (Tuned Mass Damper) is incorporated in the woofers and midranges to stabilise the surround and achieve better control, neutrality and linearity: the bass is even denser, the performance in the top midrange is improved and harmonic distortion reduced. Combined, these speaker drivers create a precise, powerful sound without colouration.The ‚ÄòM‚Äô-profile inverted dome TAM tweeters included in the kit offer a wider diffusion angle and greater sound definition, without directionality. Thanks to their tilted mounting, they are easy to install in the vehicle. An audiophile crossover completes the kit, offering several adjustment levels for the tweeters and midranges. Finally, with its engraved aluminium basket and meticulous finishes, PS 165 F3E combines style, discretion and modernity for a premium system. PS165F3E Features Unique, patented Flax cone Butyl surround with exclusive ‘TMD‚Äô profile Al/Mg ‚ÄòM‚Äô-profile inverted dome TAM tweeter Made in France in the Focal workshops High power handling Deep, sustained bass Very compact midrange Wider diffusion angle Natural, precise sound Easy installation

FOCAL TOYOTA SPECIFIC SPEAKERS FOR PERFECT INTEGRATION IS TOY 690 is a two-way component kit with a 6×9’’woofer and a tweeter enabling to equip factory locations up front and improving the musicality of numerous Toyota® models. Reliable, neutral and powerful, the compactness and the ergonomics of the IS TOY 690 makes it easy to integrate thanks to the factory connectors. IS TOY 690 Features Respect of the original Toyota® connectors Better precision in high frequencies Compact tweeter for better adaptation in factory location High-density rubber ring for acoustic sealing with the door panel This kit can be installed in the following car models: Prius Camry Tacoma Tundra FJ Cruiser

Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω - 14.4V Designed to produce a serious 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD1000/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD1000/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.] Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 600 W RMS x 1 @ 3 Ω 800 W RMS x 1 @ 2 Ω 1000 W RMS x 1 @ 1.5 Ω N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 500 W RMS x 1 @ 3 Ω 650 W RMS x 1 @ 2 Ω 800 W RMS x 1 @ 1.5 Ω N/A   General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered   Physical Specifications Height (H) 2.10 in / 53 mm Width (W) 11.40 in / 290 mm Depth (D) 7.50 in / 190 mm Net Weight

This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. GENERAL SPECIFICATIONS: Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle Steel mesh grilles are included to protect the subwoofer drivers Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 – 500W Nominal Impedance: 2 Ω Continuous Power Handling (RMS) 500 W Enclosure Type Slot-ported, Low-profile External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm

Focal TWU1.5 Aluminium/Magnesium Inverted Dome Tweeters - TWU1.5 Enhance your vehicle's audio system with the Focal TWU1.5 Tweeters, a premium high-frequency upgrade designed to deliver exceptional clarity, detail, and accuracy. Developed and manufactured in France, these compact tweeters feature Focal's renowned aluminium/magnesium inverted dome technology, providing natural treble reproduction and an extended frequency response for a truly immersive listening experience. Part of the acclaimed Focal Integration Series, the TWU1.5 tweeters are engineered for universal compatibility and custom installations. Whether you're upgrading an existing Focal system, enhancing factory speakers, or building a complete custom audio setup, these tweeters offer remarkable flexibility and outstanding acoustic performance. With multiple mounting options and a compact design, the TWU1.5 allows seamless integration into virtually any vehicle while maintaining a clean OEM-style appearance. The result is wider sound dispersion, improved stereo imaging, and greater musical detail across every genre. Key Features Designed and developed in France Aluminium/Magnesium inverted dome tweeter technology Extended 4kHz – 21kHz frequency response 94dB sensitivity for excellent efficiency Four mounting options for maximum installation flexibility Natural, accurate, and detailed sound reproduction Excellent stereo imaging and soundstage enhancement Compatible with factory and aftermarket audio systems Ideal for Focal Integration and Universal Series upgrades Sold as a pair Why Upgrade with TWU1.5 Tweeters? Factory tweeters often lack the detail and precision needed to reproduce high frequencies accurately. The Focal TWU1.5 delivers cleaner vocals, sharper instrument detail, and a wider soundstage, helping reveal nuances in your music that standard speakers can miss. Designed to integrate effortlessly into a variety of vehicle applications, these tweeters provide a significant improvement in overall system performance while maintaining tonal balance and listening comfort. Flexible Mounting Options Flush Mount Installation Angled Surface Mount Installation Flat Surface Mount Installation Behind Factory Grille Integration Benefits Improved vocal clarity and detail Extended high-frequency response Enhanced stereo imaging and soundstage Natural and balanced sound signature Suitable for OEM and aftermarket systems Simple integration into virtually any vehicle Specifications Product Type: Tweeters Tweeter Design: Inverted Dome Tweeter Material: Aluminium/Magnesium RMS Power Handling: 15W RMS Maximum Power Handling: 100W Impedance: 4 Ohm Sensitivity: 94dB Frequency Response: 4kHz – 21kHz Surround Material: Poron Voice Coil Diameter: 0.8" Mounting Type: Surface Mount Grilles Included: Yes Net Weight: 40g More Information Product Type Tweeters Series Focal Integration Tweeter Material Aluminium/Magnesium Tweeter Design Inverted Dome RMS Power 15W Maximum Power 100W Impedance 4 Ohm Sensitivity 94dB Frequency Response 4kHz - 21kHz Surround Material Poron Voice Coil Diameter 0.8" Mounting Type Surface Mount Grilles Included Yes Net Weight 40g Vehicle Compatibility Universal Sold As Pair Country of Design France What's Included 2 x Focal TWU1.5 Tweeters Surface Mount Hardware Flush Mount Hardware Installation Accessories Protective Grilles Installation Instructions

Focal Inside Ford Ranger PX1, PX2 & PX3 6.0 Audio Upgrade Pack Transform the factory audio system in your Ford Ranger PX Series with the Focal Inside Ford Ranger PX1/PX2/PX3 6.0 Pack. This complete Plug & Play audio upgrade combines premium Focal speakers, a compact digital amplifier, and vehicle-specific integration harnesses to deliver exceptional sound quality, improved clarity, and greater listening enjoyment without compromising your vehicle's factory appearance. Designed specifically for Ford Ranger PX Series 1, 2, and 3 models, this package upgrades both front and rear speakers while adding dedicated amplification for greater control, power, and dynamic performance. The result is clearer vocals, improved bass response, enhanced detail, and a more immersive listening experience whether you're commuting, touring, or heading off-road. Using Focal's renowned Polyglass cone technology and aluminium inverted dome tweeters, the speaker upgrades provide accurate sound reproduction and excellent musical detail. The included Focal Impulse 4.320 amplifier ensures the speakers perform to their full potential, delivering clean power and improved system headroom. Key Features Complete Plug & Play audio upgrade package for Ford Ranger PX1, PX2 and PX3 Upgrades front and rear factory speakers Includes dedicated Focal compact digital amplifier Vehicle-specific Ford integration harnesses included No cutting, soldering or major modifications required on compatible vehicles Improved clarity, soundstage, bass response and overall audio quality Maintains factory appearance and OEM functionality Designed for factory head unit integration Ideal for daily drivers, touring vehicles and 4WD builds Vehicle Compatibility Ford Ranger PX Series 1 Ford Ranger PX Series 2 Ford Ranger PX Series 3 What's Included IS FORD 165 – Front 2-Way Component Speaker Kit IC FORD 165 – Rear 2-Way Coaxial Speaker Kit Impulse 4.320 – Compact Digital Amplifier IW-FORDV2-YISO – Ford-Specific Y-ISO Integration Harness IMP EXTENSION I/O 150 – Amplifier Extension Harness IW-PWSUP600 – Amplifier Power Supply Cable Pack Benefits Enhanced front-stage clarity and vocal definition Improved rear cabin audio performance Greater amplifier control and speaker efficiency Stronger bass response and dynamic range Cleaner sound at higher listening volumes Balanced sound throughout the vehicle cabin OEM-style installation with minimal vehicle modification Why Upgrade Your Ford Ranger Audio? While the Ford Ranger PX is one of Australia's most popular utes, many owners find the factory sound system lacks the clarity, power, and detail expected from a premium audio experience. The Focal Inside 6.0 Pack addresses these shortcomings by upgrading the key components responsible for overall sound quality. With premium Focal speakers handling front and rear audio duties and a dedicated amplifier providing clean power delivery, this package creates a richer, more detailed listening experience while maintaining factory integration and reliability. Installation Notes Designed for compatible Ford Ranger PX1, PX2 and PX3 vehicles Suitable for factory head units only Not compatible with factory premium amplified audio systems Aftermarket head unit installations may require additional wiring accessories Professional installation recommended Vehicle compatibility should be confirmed before purchase Recommended For Ford Ranger owners seeking improved sound quality Touring and 4WD enthusiasts Daily drivers wanting better clarity and performance Users looking for a complete Plug & Play speaker and amplifier upgrade Customers wanting premium audio without custom fabrication Pack Summary Vehicle Ford Ranger PX1 / PX2 / PX3 Pack Type Powered Speaker Upgrade Pack Front Speakers IS FORD 165 Component Speakers Rear Speakers IC FORD 165 Coaxial Speakers Amplifier Focal Impulse 4.320 Integration Harnesses IW-FORDV2-YISO, IMP EXTENSION I/O 150, IW-PWSUP600 Installation Type Vehicle-Specific Plug & Play

Dieci 120W 6 Inch 2-Way Coaxial Speakers Large motor assembly Pure copper voice coil Water-repellent treated paper cone TPU surround Neodymium tweeter with PEI dome DIN-size basket protected by abrasion-proof dust paint Tin-plated, high current terminals Silver-plated lead wires Butyl rubber protective cover Epoxy glue for basket and motor system Low carbon content plates Adaptor ring included DISCLAIMER: Design, features and specifications subject to change without notice. Some features in videos on the Internet may not be available on all models, please contact us for the TECHNICAL SPECIFICATIONS for a complete list of features by model. This feature list is for reference only, please contact us to verify features and functionality.

To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound.From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion.This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion.Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency. Component Tweeter Size mm (in.) 35 (1.38) Power Handling - Peak W 180 Power Handling - Peak Note (Hi-Pass filtered @ 1,8kHz - 12dB Oct.) Impedance Ohm 4 Voice Coil Ø 28 (1.1) Frequency Response Hz 1k - 28k Magnet size D x d x h mm (in.) 27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12) Weight of one speaker kg (lb.) 0,10 (0.22) Magnet Neodymium Dome Tetolon D mm 28 Re Ohm 3,3 Fs Hz 900 Le mH 0,013 Mms g 0,4 Cms mm/N 0,09 BL T*m 1,9 Qts 1,3 Qes 1,9 Qms 4 Spl dB 92 A 53,4 mm 2.1 in. B 48 mm 1.89 in. C 29 mm 1.14 in D 13,5 mm 0.53 in.

MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening. Component Tweeter Size mm (in.) 35 (1.38) Power Handling - Peak W 180 Impedance Ohm 4 Voice Coil Ø 28 (1.1) Frequency Response Hz 1k ÷ 25k Magnet size D x d x h mm (in.) 27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12) Weight of one speaker kg (lb.) 0,075 (0.16) Magnet Neodymium Dome Tetolon D mm 28 Re Ohm 3,3 Fs Hz 900 Le mH 0,024 Vas I - Mms g 0,4 Cms mm/N 0,08 BL T*m 2 Qts 1,1 Qes 1,7 Qms 3,3 Spl dB 91 A 53,4 mm 2.1 in. B 48 mm 1.89 in. C 28 mm 11.1 in. D 13,5 mm 0.53 in. E 72 mm 2.8 in. F 45,6 mm 1.8 in. G 23 mm 0.9 in.

The  coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers  allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies. 1. CONCENTRIC COAXIAL TWEETER: built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.2. TWEETER SUPPORT WORKING AS A REAR CHAMBER: sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.3. 36 MM PURE COPPER WOOFER VOICE COIL: wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.4. PRESSED-PULP CONE WITH COTTON FIBERS: combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.5. “BOUNDARY FREE” RUBBER SURROUND: for improved efficiency and wider midbass frequency. (Logo Boundary Free)6. OVER-SIZED FERRITE MAGNET: combined with very low carbon content iron plates, for low distortion at high power levels.7. BASKET: low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.8. ANTI-VIBRATION RUBBER MAGNET COVER: to damp spurious vibrations. Component Coaxials Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 36 (1.42) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 21,5k Woofer Magnet size D x d x h mm (in.) 90 x 45 x 17 (3.54 x 1.77 x 0.67) Tweeter Magnet size D x h mm (in.) 29.5 x 22 x 4 (1.16 x 0.87 x 0.16) Weight of one speaker kg (lb.) 1.27 (2.8) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-pulp cone with cotton fibers Dome Tetolon Xmech mm (in.) ±6 (0.24) D mm 132 Re Ohm 3,1 Fs Hz 90 Le mH 0,01 Vas I 4 Mms g 18,9 Cms mm/N 0,15 BL T*m 5,8 Qts 0,88 Qes 1,06 Qms 5,5 Spl dB 92 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74 mm 2.91 in. D 62,6 mm 2.46 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.

The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening. Component Coaxials Size mm (in.) (6 x 9) Power Handling - Continuous W 130 Power Handling - Peak W 260 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Frequency Response Hz 30 ÷ 24k Woofer Magnet size D x d x h mm (in.) 107 x 45 x 20 (4.21 x 1.77 x 0.79) Weight of one speaker kg (lb.) 2.28 (5.03) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-pulp cone with cotton fibers Dome Tetolon Xmech mm (in.) ±8 (0.31) D mm 169 Re Ohm 3 Fs Hz 50 Le mH 0,07 Vas I 24 Mms g 30 Cms mm/N 0,34 BL T*m 7,2 Qts 0,43 Qes 0,55 Qms 2 Spl dB 94 A 241 mm 9.49 in. B 223 mm 8.74 in. C 108 mm 4.25 in. D 90 mm 3.54 in. E 267 mm 10.53 in. F 38,5 mm 1.52 in.

Hertz DS 25.3 car audio subwoofers offer high efficiency and exceptional power handling.  Equipped with a polypropylene membrane and butyl rubber surround, they provide high excursion with minimal distortion. An efficient cooling system ensures optimal heat dissipation, increasing their reliability.   Size mm (in.) 250 (10) Power Handling - Continuous W 150 Power Handling - Peak W 600 Impedance Ohm 4 No Filter Component Subwoofer Voice Coil Ø 38 (1.5) Frequency Response Hz 32 ÷ 400 Magnet size D x d x h mm (in.) 100 x 50 x 25 (4 x 2 x 1) Weight of one component kg (lb.) 3 (6.6) Magnet High density flux ferrite Cone Polypropylene with Mica injection Xmech mm (in.) 16 (0.63) D mm 215 Xmax mm 9 Re Ohm 3,3 Fs Hz 36 Le mH 2,15 Vas I 34 Mms g 106 Cms mm/N 0,18 BL T*m 8,5 Qts 0,92 Qes 1,13 Qms 5 Spl dB 89 A 257 mm 10.2 in. B 234 mm 9.2 in. C 116 mm 4.6 in. D 104 mm 4.1 in.

Hertz MPS 250 S2 shallow subwoofer has been designed to achieve exceptional performance even when there is very little space available to install the subwoofer box.MPS 250 is optimized to work in ultra-compact sealed boxesstarting from only 14 Lt (0.49 Cf). A typical example is a subwoofer enclosure under the rear bench of pickup trucks, where the space - and the height - are limited.Mille PRO shallow subwoofer have a depth/performance ratio never achieved before thanks to the impressive cone excursion capacity which is 20% higher than a traditional design.This exceptional target has been achieved thanks to the ingenious suspension group design featuring a dedicated support structure for spider and coil. This solution has allowed to move the magnetic group inwards, reducing the depth and at the same time maximizing cone linear excursion.

Hertz DIECI POWER amplifier DP 4.400 is an audio powerhouse designed to elevate your car audio experience to unprecedented heights. Boasting High-Resolution Audio Certification, this amplifier delivers an impressive frequency response of 10 Hz to 45 kHz, ensuring that every nuance of your music is faithfully reproduced with crystal-clear precision.Despite its compact size, the DP 4.400 packs a punch with its maximum power output, featuring fully bridgeable 4-channel Class-AB amplification and 2Ω stability. This innovative design allows for a potent audio performance without sacrificing space, making it an ideal choice for those seeking uncompromised sound in a limited footprint.The amplifier's aesthetics are as impressive as its performance. An elegant status LED, solid machined terminal block, and a removable top panel that safeguards controls and connections contribute to a sleek and sophisticated design that seamlessly integrates into any car interior.Universal compatibility is a key feature of the DP 4.400, offering an operating supply voltage ranging from 6.5 to 16.5 V and speaker-in input sensitivity from 1.6 to 40 Vrms. The integrated Universal Speaker Simulator enhances versatility, ensuring optimal performance with a wide range of audio sources.Experience high-noise rejection with the balanced input circuitry of the Pre-in and Speaker-in, allowing for clean and interference-free signal transmission. The full set of controls, including adjustable input levels, high/low-pass crossover filters (50-4000Hz 12dB/Oct.), and bass boost, provides users with the flexibility to fine-tune the audio to their preferences.Convenience meets intelligence with the Automatic Remote Turn-On/Off feature, seamlessly triggered by OEM radio speaker outputs. This ensures hassle-free operation and an efficient power management system.Whether utilizing Speaker-In or Pre-In level inputs, the DP 4.400 offers full-range pre-outs, providing further flexibility in system configuration. Elevate your car audio system with the Hertz DIECI POWER Amplifier DP 4.400 – where power, precision, and style converge for an unparalleled listening experience on the road.   Channels 4 - 3 - 2 Amp class AB POWER SUPPLY Nominal power supply voltage (fuse) 11 ÷ 15 VDC (2 x 25 A) Operating power supply voltage 6.5 ÷ 16.5 VDC Idling current 0.85 A Standby current draw 10 uA Consumption, MIN load impedance (Max Musical Power) 30 A Remote IN 4 ÷ 15 VDC (1.5 mA) ART - Automatic Remote Turn on/off from SPK-IN (BTL radio only) 1.5 VDC Efficiency 60% AMPLIFIER STAGE Distortion - THD @ 100 Hz, 70% Rated Power 0.01% Damping factor @ 1 kHz, 1W 130 Bandwidth @ -3 dB 10Hz ÷ 45kHz S/N ratio (A-weighted @ 1 V Input) 101 dBA Minimum load impedance @ 4 Ch: 2 Ω @ 3 Ch: 2 Ω + 2 Ω + 4 Ω @ 2 Ch: 4 Ω Adjustable Crossovers yes Output Power Output power (RMS) @ 1% THD: 4Ch @ 4Ω 75 W x 4 4Ch @ 2Ω 105 W x 4 3Ch @ 4Ω 75 W x 2 + 210 W x 1 3Ch @ 2Ω / 4Ω 105 W x 2 + 210 W x 1 2Ch @ 4Ω 210 W x 2 Output Power (RMS) @ 14.4 VDC, THD 10%: 4Ch @ 4Ω 90 W x 4 4Ch @ 2Ω 125 W x 4 3Ch @ 4Ω 90 W x 2 + 250 W x 1 3Ch @ 2Ω / 4Ω 125 W x 2 + 250 W x 1 2Ch @ 4Ω 250 W x 2 Total Power 500 W Inputs Pre-In / Speaker-In Pre Out Full Range (Front) Pre-In sensitivity 0.32 ÷ 8 VRMS Speaker-In sensitivity 1.6 ÷ 40 VRMS Front Ch Hi-Pass Full / 50-4000Hz 12dB/Oct. Front Ch Lo-Pass Full / 50-4000Hz 12dB/Oct. Rear Ch Hi-Pass Full / 50-4000Hz 12dB/Oct. Rear Ch Lo-Pass Full / 50-4000Hz 12dB/Oct. Bass Boost 50Hz 0 ÷ 9 dB Dimension mm in A 335 13.19 B 297 11.69 C 190 7.48 D 166 6.53 E 50 1.96 Weight Kg lbs 2.88 6.35

The VIBE BlackDeath Pro-8 8" Pro Audio Car Speaker is built for extreme sound performance, delivering high SPL output, aggressive mid-bass, and competition-level volume. Designed using professional PA speaker technology, this 8 inch woofer is ideal for loud car audio systems, SPL builds, and enthusiasts who demand powerful and clear sound at high volumes. Engineered for maximum efficiency, the semi-pressed paper cone provides high sensitivity with low moving mass, allowing the speaker to produce incredibly loud output with minimal power. The dual roll cloth surround ensures fast and precise cone control, delivering tight bass response and strong midrange clarity even under heavy load. Featuring the signature BlackHole dustcap, this speaker increases effective cone area to maximise sound pressure levels, producing extreme volume with clarity and control. Perfect for competition setups, custom builds, or upgrading your car speaker system, the BlackDeath Pro-8 offers durability, performance, and unmatched output. Specifications Speaker Type: Pro Audio Component Woofer Speaker Size: 8" (203mm) Peak Power: 600W RMS Power: 200W Minimum Input: 100W Sensitivity: 93 dB Frequency Response: 65 Hz – 7.5 kHz Impedance: 4 Ohm Mounting Depth: 85mm (3.4") Mounting Diameter: 185mm (7.3") Voice Coil Diameter: 44mm (1.7") Magnet Weight: 40 oz Unit: Sold as Single Speaker

The VIBE 4 AWG Amplifier Wiring Kit is a complete solution for installing your car amplifier or subwoofer system, delivering reliable power transfer and easy installation. Designed for performance and value, this kit includes everything needed to get your audio system up and running efficiently. Built with high-quality CCA (Copper Clad Aluminium) wiring, the kit provides consistent power delivery while remaining lightweight and flexible for installation. The included RCA interconnect and remote turn-on cable ensure clean signal transmission, while the speaker cables support strong and clear audio output. Perfect for car audio upgrades, amplifier installations, and subwoofer setups, this all-in-one wiring kit simplifies the installation process while maintaining dependable performance and durability. Specifications Product Type: Amplifier / Passive Enclosure Wiring Kit Cable Gauge: 4 AWG Material: CCA (Copper Clad Aluminium) Power Cable Length: 5m Ground Cable Length: 1m RCA Interconnect Length: 5m Remote Turn-On Cable Length: 5m Speaker Cable: 2 x 5m Flat 16 AWG Fuse: 60 Amp with Fuse Holder Terminals: 2 x Spade Terminals Accessories: 6 x Cable Ties

The VIBE 4 Channel Line Output Converter (LOC) is designed to convert speaker-level audio signals into line-level RCA outputs, allowing seamless integration of aftermarket amplifiers into factory car audio systems. It’s the ideal solution for upgrading your sound system without replacing your OEM head unit. Featuring advanced AUTO SENSE technology, this converter automatically detects audio signal and generates a +12V remote turn-on output, eliminating the need for additional wiring or ignition sources. This makes installation faster, cleaner, and more efficient. With high-quality gold-plated connections, the LOC ensures reliable signal transfer and reduced interference, delivering clean and consistent audio performance. Perfect for car audio upgrades, amplifier installs, and subwoofer integration, it provides a simple and effective solution for enhancing your system. Specifications Product Type: Line Output Converter (LOC) Channels: 4 Channel Function: Speaker-Level to RCA Conversion Technology: AUTO SENSE (Signal Detection & Remote Turn-On +12V Output) Connections: Gold-Plated Terminals Application: Amplifier & Subwoofer Integration

The AP 4 midbass offers very extended frequency response, both in high and low frequencies, combined with high efficiency and features a 25 mm pure copper voice coil to ensure more balance in mid-high frequency ranges. Technical Specs Nominal diameter 100 mm (4 in) Impedance 4 Ohm Power Handling - Peak 120 W Power Handling - Continuous 40 W Sensitivity 91 dB Frequency Response 80 ÷ 7,5k Hz Voice Coil Ø 25 mm Magnet size D x d x h 70 x 32 x 10 mm (2.75 x 1.26 x 0.39 in) Xmax 1.8 mm (0.07 in) Electric-acoustic Specs Re 3.2 Ohm Fs 125 Hz Le 0.16 mH Vas 1.5 l (0.053 ft) Mms 5 g (0.176 oz) Cms 0.3 mm/N BL 3.4 T•m Qts 1 Qes 1,2 Qms 7.6 General Weight 0.4 kg Dimensions Dimension A 103 mm (4.06 in) Dimension A3 130 mm Dimension B 93 mm (3.66 in) Dimension C 43 mm (1.69 in) Dimension D 41 mm (1.61 in)

Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 4D amplifier is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results. General Specs Channels 4 - 2 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 1 x 15 A Idling current (power ON/OFF) 1.2 A / 0.04 mA Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 15 A Remote In: 4 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-On/Off AMPLIFIER STAGE Distorsion - THD (100 Hz @ 4Ω) 0.2 % Bandwidth: 10 ÷ 30K Hz S/N Ratio (A weighted @ 1 V): 95 dB Damping factor (100 Hz @ 4Ω) 45 Pre-In sensitivity: LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V Load impedance (MIN)@ 4 Ch:@ 2 Ch: 2Ω4Ω Max size (mm/in): 223 x 100,5 x 43,6 / 8.77 x 3.95 x 1.71 Weight (kg/lb): 1.35 / 2.97 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 4 Ch 50 W x 4 (4 Ω) 4 Ch 65 W x 4 (2 Ω) 3 Ch 50 W x 2 (4 Ω) + 130 W x 1 (4 Ω) 3 Ch 65 W x 2 (2 Ω) + 130 W x 1 (4 Ω) 2 Ch 130 W x 2 (4 Ω) OUTPUT POWER (RMS) @ 14.4 VDC, THD 10%: 4 Ch 60 W x 4 (4 Ω) 4 Ch 75 W x 4 (2 Ω) 3 Ch 60 W x 2 (4 Ω) + 150 W x 1 (4 Ω) 3 Ch 75 W x 2 (2 Ω) + 150 W x 1 (4 Ω) 2 Ch 150 W x 2 (4 Ω) Total Power 600 W INPUTS / FILTERS Inputs: PRE IN FRONT Ch. filters FULL: Yes Lo-Pass: 65-85-115 Hz @ 12 dB/Oct REAR Ch. filters FULL Yes Hi-Pass: 65-85-115 Hz @ 12 dB/Oct Lo-Pass: 65-85-115 Hz @ 12 dB/Oct. Physical Specs mm in A 223 8.78 B 207 8.15 C 100,5 3.96 D 76 2.99 E 43,6 1.72

Alpine Status 10" Subwoofer – HDZ-W10 Experience powerful, precise bass with the Alpine Status HDZ-W10 10-inch subwoofer. Featuring a pulp-mica cone with a carbon-fibre dust cap, a High Amplitude Multi-Roll (HAMR) rubber surround and a cast aluminium frame, it is engineered for high-performance in-car audio systems. The dual 4-ohm voice coils offer flexible wiring options, allowing a 2-ohm load when wired in parallel or an 8-ohm load when wired in series. With 800W RMS power handling and 2,400W peak power, this subwoofer delivers deep, controlled bass with up to 20mm of linear excursion. Choose a sealed or ported enclosure to suit your audio setup, with recommended box volumes ranging from 0.622 to 1.622 cubic feet for sealed enclosures and 1.122 to 1.872 cubic feet for ported enclosures. The included mesh grille and aluminium trim ring provide a clean, finished installation. Key Features 10-inch Alpine Status Series subwoofer Dual 4-ohm voice coils with 2-ohm or 8-ohm wiring options Pulp-mica cone with carbon-fibre dust cap High Amplitude Multi-Roll (HAMR) rubber surround Cast aluminium frame 800W RMS power handling / 2,400W peak power 20mm linear excursion Black steel mesh grille and aluminium trim ring included Technical Specifications Model: HDZ-W10 Frequency Response: 26Hz–200Hz Sensitivity: 82.2dB (1W) Voice Coil Impedance: Dual 4 ohms Power Handling: 800W RMS / 2,400W peak Top-Mount Depth: 7.42" Cutout Diameter: 9" Frame Dimensions: 10.515" × 10.515" Cone Material: Pulp-mica Surround Material: Rubber Basket Material: Aluminium Linear Excursion (Xmax): 20mm Recommended Enclosure Volumes Sealed: 0.622–1.622 cu. ft. (ideal: 0.97 cu. ft.) Ported: 1.122–1.872 cu. ft. (ideal: 1.76 cu. ft.) What's in the Box Alpine Status 10" subwoofer Mesh grille Aluminium trim ring Two voice coil jumpers (pre-installed) 3mm hex key Application guide Product registration and warranty information Warranty: 1 year

Alpine Status 12" Subwoofer – HDZ-W12 Experience powerful, precise bass with the Alpine Status HDZ-W12 12-inch subwoofer, engineered to deliver deep, controlled low frequencies for an immersive in-car audio experience. Featuring a carbon fibre dust cap, pulp-mica cone body and triple-stacked strontium ferrite magnets, it combines durability with impressive sound performance. The High Amplitude Multi-Roll (HAMR) surround and dual progressive spiders with integrated tinsel leads support up to 20mm of linear excursion for powerful bass reproduction. Its cast aluminium frame and premium aluminium trim ring provide a robust, refined finish. With 800W RMS power handling and 2,400W peak power, the Alpine Status HDZ-W12 is designed for high-performance car audio systems where bass depth, control and precision matter. Key Features 12-inch subwoofer with carbon fibre dust cap and pulp-mica cone body Triple-stacked high-power strontium ferrite magnets High Amplitude Multi-Roll (HAMR) surround Dual progressive spiders with integrated tinsel leads Cast aluminium frame with premium aluminium trim ring Compound radius curve extended pole geometry 20mm linear excursion Technical Specifications Model: HDZ-W12 Dimensions: 12-7/8" × 12-7/8" × 9-2/8" Mounting Depth: 7-3/8" Frequency Response: 24Hz–200Hz Power Range: 400W–800W RMS Power Handling: 800W RMS / 2,400W peak Magnet Weight: 174oz × 3 Voice Coil: 65.5mm (2.6") Linear Excursion: 20mm

FOCAL ACX 100AUDITOR EVO SERIES 4" 2-WAY CAR SPEAKERS The benefit of Focal innovation Focal designed their updated Auditor EVO Series speakers in France. That's a big deal — it means that these entry-level car speakers were reimagined by some of the same minds that design their flagship models. You'll recognize staples of Focal's famous sound: the inverted dome tweeter for precise treble and an improved soundstage; a polypropylene cone for a neutral and dynamic sound; and a butyl surround for impressive responsiveness. The aim of Auditor EVO Focal's goal is to improve the audio experience in any type of car, and these impressive ACX 100 4" coaxial speakers will easily outperform your factory speakers and bring the fun back to your drive time. Prepare for a new level of richness in the midrange, and Focal's acclaimed inverted dome tweeter, with its handsome black lacquered finish, broadcasts high-frequency details that put standard tweeter designs to shame. An integrated, high-fidelity crossover ensures that the woofer handles only the lower frequencies and the tweeter only handles the highs, giving you a smooth sound overall. Ready to ride A polypropylene woofer cone and butyl rubber surround help these speakers live a long life in your car doors, withstanding all kinds of environmental abuse while delivering robust sound. Product highlights: 2-way car speakers (pair) 4" polypropylene woofer cone with butyl rubber surround Mylar inverted dome tweeter rigid steel basket mesh/ABS mesh grilles included handles up to 30 watts RMS (60 watts peak) frequency response: 80-21,000 Hz sensitivity: 88 dB impedance: 4 ohms mounting depth: 1-15/16" warranty: 1 year MFR # ACX100 Item # 091ACX100 Features & specs General Speaker Size 4 Design 2-way Tweeter Design Inverted Dome Impedance (Ohms) 4 Tweeter Composition Mylar Woofer Composition Polypropylene Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 88 Frequency Response 80 - 21k Hz Minimum RMS Wattage --- Maximum RMS Wattage 30 Peak Power Handling (Watts) 60 Top-mount Depth (Inches) 1 15/16 Bottom-mount Depth (Inches) 2 1/8 Cutout Diameter or Length (inches) 3 11/16 Mounting Height (Inches) 0.443 Frame Width 4.027 Frame Length 4.027 What's in the box: Two 2-way speakers 2 Grilles Focal owner's manual 2 Grille mounting rings Eight 1" Screws 8 Speed clips Owner's manual (English/ French/ German/ Spanish/ Italian/ Portuguese/ Dutch/ Polish/ Chinese/ Russian/ Korean/ Japanese/ Arabic)

The Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier, as well as the FIT 9.660 ultra-compact 9-channel amplifier/DSP. It allows the quick and simple connection of the BMW/MINI original head unit and of Focal Inside extension cables. * Compatibility: BMW and MINI vehicles between 2009 - 06/2019 - Compatibility to be checked with an installer. Additional Information Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 3.28ft (1 m)

Focal IW BMW IMP 2.1 BMW/IMPULSE 4.320 Car Harness   The BMW 2.1 IMP HARNESS connection cables are designed for connecting BMW speaker drivers and theIMPULSE 4.320 compact 4-channel digital amplifier.The specific BMW connectors make installation simple. This cable enables amplification of a vehicle's front speakers across 2 channels, and amplification of two BMW subwoofers over the other two channels of the IMPULSE 4.320 amplifier.

The Focal Inside IW IMP 2.2 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and two ISUB Twin subwoofers without changing the original wiring. Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility

The Focal Inside IW IMP 2.1  car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring. Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility 

In addition to its 400-watt power and its Flax cone for a natural sound, one of the highlights of the P 20 FSE subwoofer is its unique slim design, making it light and even easier to install in your vehicle. Its built-in motor adds to its compactness, without compromising on the power delivered. Its robust shaped rubber surround allows impressive articulation, synonymous with extended frequency response and deep bass reproduction. Finally, the 1 1/2″ (38mm) coil on glass fibre stand reduces overheating to guarantee perfectly adapted ventilation. P 20 FSE is the ideal compromise for a very compact sealed-box use (6 to 9L). P20FSE Features Unique, patented Flax cone “Dual Magnet” motor Made in France in the Focal workshops Slim design, even easier integration Power and precision

Designed and developed in France, the Sub 12 Slim benefits from Focal’s sound savoir-faire. With its 12” (30cm) polypropylene cone, this subwoofer provides an excellent bass boost for any on-board audio system. It has a single voice coil architecture for simplicity and efficacy. With a very shallow depth, this product is easily installed into restricted spaces such as the sides of a car boot. Key points• Shallow depth; easy to install• A deep and powerful bass• Efficacy as sealed box, from 15L• Robust design; steel chassis• Excellent power handling

ISO harness cable The Focal Inside VOLKSWAGEN Y-ISO HARNESS car radio adapter cable is designed for the IMPULSE 4.320 four-channel digital amplifier. It allows connection to the original Volkswagen car radio and quick and easy connection of Focal Inside extension cables. Designed specifically for Volkswagen vehicles after 2005, this one-meter-long cable allows easy Plug & Play installation. Connection to the extension cable is via ISO connectors; no soldering is required.

IW-IMP-EXT150 Impulse amp cable kit, facilitates quick install of Impulse amps to vehicles via ISO plugs Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers. Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.    Developed with twisted cables to effectively eliminate disturbance Three different lengths to suit all vehicles Cut-resistant protective shield Great flexibility for the easiest possible installation Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320 No soldering required Length: 5ft (1,50m)

FOCAL INSIDE NISSAN Y-ISO HARNESS HEAD UNIT ADAPTATION CABLE The Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Focal Inside extension cables. Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 0.9ft (0.3m)  Compatibility: for Nissan vehicles since 2008

FOCAL INSIDE FORD Y-ISO HARNESST-HARNESS ADAPTER FOR AN IMPULSE AMPLIFIER Inside upgrade harness Focal's Inside system upgrades include new aftermarket vehicle-specific speakers and subs, along with their Impulse 4.320 4-channel amp. Focal also offers a variety of cables and connectors that you'll need, including: speaker wire harnesses for tweeters, subs, and center channel; T-harnesses that connect the vehicle and factory radio to the upgrade system; and extension cables to connect the T-harness to the amplifier. This T-harness provides the upgrade connections between your select Ford vehicle and a Focal Impulse 4.320 amplifier by way of the appropriate extension cable (see below). Product highlights: Ford T-harness for a Focal Inside system upgrade provides connections for an Impulse 4.320 amplifier IMP EXT ISO 5' Extension Cable accessory power and ground connections available warranty: 1 year MFR # IW FORD Y-ISO Item # 091FORYISO  Features Overview: This vehicle specific harness simplifies adding the Focal Impulse 4.320 amplifier to a compatible vehicle. The ISO extension cable (item number 091IMPEXT1, sold separately) must also be added to connect the amp. This adapter supplies the amp with a speaker level signal input, power, and ground, and connects the amp's output to the factory speaker wiring. (Power and ground for the amp are connected using the attached crimp connectors.) Please enter your vehicle information to confirm compatibility. What's in the box: Focal Inside vehicle specific adapter harness

In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V3. HILO.V3 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. The selectable DC and AC voltages detection makes the HILO compatible with any original manufacturer head units. Entirely developed by Focal, HILO is available under generation 3 with an impedance simulator that creates a speaker simulation network to avoid head-unit muting.

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. These Focal FRAK 1-1/4" component tweeters are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. These Focal FRAK component tweeters will faithfully reproduce the high-frequency detail and dynamics as part of a K2 Power M Series component system.     Astonishing detail Focal engineers applied some of their most innovative technologies, including an M-profile aluminum/magnesium cone, to make these tweeters uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 25 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 1-1/4" tweeters aluminum 'M'-profile cone design tuned mass damper surround includes mounting brackets and grilles 4-ohm impedance handles up to 25 watts RMS (150 watts peak power) frequency response: 600-32,000 Hz sensitivity: 91 dB at 2.83 volts top-mount depth: 3/4" warranty: 1 year MFR # FRAK Item # 091FRAK Features & specs General Speaker Size 1 1/4 Design 1-way Tweeter Design M-Profile Cone Impedance (Ohms) 4 Tweeter Composition Aluminum Woofer Composition --- Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 91 Frequency Response 600 - 32k Hz Minimum RMS Wattage --- Maximum RMS Wattage 25 Peak Power Handling (Watts) 150 Top-mount Depth (Inches) 0 3/4 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 2 Mounting Height (Inches) 0.5 Frame Width 2.3 Frame Length 2.3 What's in the box: 2 Tweeters Focal owner's manual 2 Steel mounting rings Quick start guide

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. The Focal 6.5KM 6-1/2" component woofers are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. This pair of Focal 6.5KM component woofers will handle the low-end detail and dynamics in your K2 Power M Series component system.     Powerful sound Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make these 6-1/2" woofers uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 120 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 6-1/2" component woofers (pair) "M"-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket neodymium magnet 4-ohm impedance handles up to 120 watts RMS (240 watts peak power) frequency response: 50-5,000 Hz sensitivity at 2.83V: 92.5 dB top-mount depth: 2-1/8" grille not included warranty: 1 year MFR # 6.5KM Item # 09165KM What's in the box: Two 6.5 KM Woofers Focal Performance owner's manual Eight 1-1/8" Screws Eight speed clips Quick start guide Features & specs General Speaker Size 6 1/2 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition Aramid Fiber Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 93 Frequency Response 50 - 5k Hz Minimum RMS Wattage --- Maximum RMS Wattage 120 Peak Power Handling (Watts) 240 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.45 Frame Width 6.494 Frame Length 6.494

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. This single Focal 3KM 3-1/8" midrange driver is designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. The Focal 3KM provides faultless mid-range performance as part of your K2 Power M Series component system.   Excellence in the midrange Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make this 3-1/8" driver uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 60 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: single 3-1/2" midrange speaker 'M'-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket 4-ohm impedance handles up to 60 watts RMS (120 watts peak power) frequency response: 200-9,000 Hz sensitivity: 89 dB at 2.83 volts top-mount depth: 1-1/8" optional grille available warranty: 1 year MFR # 3KM Item # 0913KM What's in the box: Focal 3KM owner's manual One 3 KM Midrange Four 3/4" Screws Four speed clips Quick start guide Features & specs General Speaker Size 3 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition --- Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 89 Frequency Response 200 - 9k Hz Minimum RMS Wattage --- Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 1 1/8 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 2 5/8 Mounting Height (Inches) 0.176 Frame Width 3.144 Frame Length 3.144

About the Focal 25A4 Dream speakers Perfect sound. Discreet style. Premium construction. These are the standards that define Focal – and that make listening to Focal speakers an absolute pleasure. The Access line offers a marriage of performance and affordability, allowing you to experience the best in sound with a guilt-free conscience. Feel the bass Bass gives your music fullness and texture. If you shortchange the bass, you're not hearing your music the way it's meant to be heard. This Focal Access Series 25A4 subwoofer uses an all-weather DFS (dual fiberglass structure) cone to deliver that depth of character you may be missing from your system. The cone's butyl rubber surround helps to ensure excellent strength, durability, and musical accuracy. A unique ventilation system keeps the voice coil cool, allowing this sub to handle up to 200 watts RMS. Install this sub in a sealed box for tight, punchy bass, or in a ported enclosure for a little more boom. Highlights: 10" 4-ohm subwoofer dual fiberglass structure cone with butyl rubber surround 4-3/4" magnet promotes serious power handling spider decompression ventilated coil high SPL power handling: 50-200 watts RMS (400 watts peak) frequency response: 36-500 Hz top-mount depth: 5" sealed box volume: 0.52-0.88 cubic feet ported box volume: 0.71-1.23 cubic feet sensitivity: 85.4 dB at 2.83 volts grille not included warranty: 1 year MFR # 25A4 Item # 09125A4 What's in the box: One 10" Single voice coil woofer Manual Removable rubber mounting ring (installed) Eight 7/8" Self-tapping screws User manual (English/ French/ Russian) Focal window sticker

Same great bass in less space Focal's SUB 25 KXS subwoofer combines the great features of their K2 Power Series subs with a practical shallow-mount design to deliver the solid, hard-hitting low end you expect from Focal. Precision engineering and handmade craftsmanship ensure you'll enjoy great sound. Assembled and inspected by hand Focal assembles its subs by hand in their French facilities and rigorously inspects each one for any flaws to ensure your investment performs to the highest sonic standards. Mount this 4-ohm sub in a sealed enclosure to produce bass that's highly accurate and plenty forceful, then feed it up to 350 watts RMS without fear. A powerful magnet drives the sound A neodymium magnet supplies the backbone for the sub's powerful output, driving the motor assembly with unerring precision. Focal anchors the K2 Power sub with an aluminum basket that combines rigidity and efficient heat dissipation for reduced distortion and longer speaker life. 4-layer cone delivers sonic fidelity Focal's proprietary K2 4-layer aramid fiber composite sandwich cone combines rigidity and responsiveness to deliver sonic fidelity and high power handling. A butyl rubber surround maintains control of the cone, even during deep excursion. Subwoofer Wiring Diagrams Product highlights: 10" 4-ohm shallow-mount subwoofer 4-layer K2 composite sandwich cone with butyl rubber surround aluminum basket power handling: 350 watts RMS (700 watts peak) frequency response: 25-500 Hz sensitivity: 84.5 dB top mount depth: 3.72" sealed box volume: 0.45-0.85 cu. ft. grille not included warranty: 1 year MFR # SUB25KXS Item # 091SUB25KS What's in the box: One 10" Subwoofer Focal owner's manual Quick start guide Focal window sticker Features & specs Features and Specs Size 10 -inch Impedance (Ohms) 4 Cone Material K2 Aramid Fiber Sandwich Surround Material Butyl Rubber Port diameter (inches) N/A Port length (inches) N/A Free-Air No Dual Voice Coil No Sensitivity 84.5 dB at 2.83 volts Frequency Response 25 - 500 Hz Max RMS Power Handling 350 Peak Power Handling (Watts) 700 Top Mount Depth (inches) 3 3/4 Bottom Mount Depth (inches) N/A Cutout Diameter or Length (inches) 9 1/4 Frame Width 10.55 Frame Length 10.55 Vas (liters) 18 Fs (Hz) 35 Qts 0.8 Xmax (millimeters) 0 Parts Warranty 1 Year Labor Warranty 1 Year Box Requirements Ideal Sealed Box Volume (cubic feet) N/A Minimum Sealed Box Volume (cubic feet) 0.45 Maximum Sealed Box Volume (cubic feet) 0.85 Ideal Ported Box Volume (cubic feet) N/A Minimum Ported Box Volume (cubic feet) N/A Maximum Ported Box Volume (cubic feet) N/A

High-performance sub This sub's name gets straight to the point — Focal's K2 Power Series SUB 25 KXE 10" subwoofer delivers powerful, hard-hitting low end that combines realistic reproduction and competition-level sound pressure. Precision engineering and hand-assembled construction make this sub a sound choice for a high-performance bass system. Assembled and inspected by hand You can feed the SUB 25 KXE subwoofer up to 600 watts RMS without fear. This dual 4-ohm voice coil sub works best in sealed enclosures to produce bass that's highly accurate and plenty forceful. Focal assembles its sub by hand in their French facilities and rigorously inspects each one for any flaws to ensure your investment performs to the highest sonic standards. A powerful magnet drives the sound A massive two-segment magnet supplies the backbone for the sub's powerful output, driving the motor assembly with unerring precision. Focal anchors the K2 Power sub with an aluminum basket that combines rigidity and efficient heat dissipation for reduced distortion and longer speaker life. 4-layer cone delivers sonic fidelity Focal's proprietary K2 4-layer aramid fiber composite sandwich cone combines rigidity and responsiveness to deliver sonic fidelity and high power handling. A butyl rubber surround maintains control of the cone, even during deep excursion. Subwoofer Wiring Diagrams Product highlights: 10" dual 4-ohm voice coil subwoofer 4-layer K2 composite sandwich cone with butyl rubber surround aluminum basket power handling: 600 watts RMS (1200 watts peak) frequency response: 25-500 Hz sensitivity: 84.5 dB top mount depth: 6.8" mounting height: 1.0" cutout diameter: 9.254 sealed box volume: 0.48 - 0.93 cu. ft. grille not included warranty: 1 year MFR # SUB25KXE Item # 091SUB25KX What's in the box: Focal owner's manual 10" Dual 4-ohm voice coil subwoofer Quick start guide (English/ French/ German/ Italian/ Spanish/ Portuguese/ Dutch/ Russian/ Polish/ Chinese/ Korean/ Japanese/ Arabic) Features & specs Features and Specs Size 10 -inch Impedance (Ohms) 2, 8 Cone Material K2 Aramid Fiber Sandwich Surround Material Butyl Rubber Port diameter (inches) N/A Port length (inches) N/A Free-Air No Dual Voice Coil Yes Sensitivity 84.5 dB at 2.83 volts Frequency Response 25 - 500 Hz Max RMS Power Handling 600 Peak Power Handling (Watts) 1200 Top Mount Depth (inches) 6 13/16 Bottom Mount Depth (inches) N/A Cutout Diameter or Length (inches) 9 5/16 Frame Width 10.55 Frame Length 10.55 Vas (liters) 20 Fs (Hz) 38 Qts 0.52 Xmax (millimeters) 22.5 Parts Warranty 1 Year Labor Warranty 1 Year Box Requirements Ideal Sealed Box Volume (cubic feet) N/A Minimum Sealed Box Volume (cubic feet) 0.48 Maximum Sealed Box Volume (cubic feet) 0.93 Ideal Ported Box Volume (cubic feet) N/A Minimum Ported Box Volume (cubic feet) N/A Maximum Ported Box Volume (cubic feet) N/A

12-INCH SLIM SUBWOOFER•  Flax Cone: High rigidity, deep and controlled bass•  Engraved serial number: Guarantee of authenticity•  Fiberglass voice-coil material: Overheating reduction•  Integrated magnet: Compact and powerful•  Push terminal block: Easy wiring•  Rubber surround catenary profile: Long life, reliability for a high excursionKEY POINTS•  Shallow and lightweight•  Mace in France in the Focal workshops•  Robust design and quality materials•  Exclusive Flax* technologySPECIFICATIONS:•  Diameter: 12″•  Cone: Sandwich Flax•  Magnet: Ferrite•  Surround: Rubber•  Max Power: 600W•  Nom Power: 300W RMS•  Sensitivity (2.83v/1m): 89dB

ISUB ACTIVE 2.1 2-channel amplifier The ISUB ACTIVE 2.1 subwoofer complements any original audio system, providing powerful (260 W), dynamic bass and amplification of the vehicle's front channels (2.1). It connects to the car radio's speaker outputs via the supplied Plug & Play cable, providing a genuine enhancement of the sound experience without loss of space in the cabin or trunk. KEY POINTS Focal know-how 2-channel amplifier Ready to use (Plug & Play ISO cable included) Compact product, discreet integration Ease of use Various settings (adjustable incoming signal, adjustable amplifier crossover, sound level boost, etc.) Robust design Sound - Acoustics Product type : Ultracompact amplified 20cm (8 ") and 2 -channel amplified subwoofer Loudspeakers : Subwoofer: 8" Filter : Integrated Frequency response (+/- 3dB) : 45Hz - 150kHz Maximum power : 260 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 130 W RMS Sound - Electronics Number of channels : 2 Configurable High Pass / Low Pass filter : High-pass crossover ajustable from 20 to 50 Hz Low-pass crossover ajustable from 50 to 180 Hz RMS power : 130 W RMS