All

Performance Gain: Up to 36kW / 91Nm Unlock the full potential of your Ford Ranger Next Gen 2.0L with the TORQIT Power Module (CRMQ2012). Specifically engineered for the latest Ranger platform, this advanced plug-and-play performance module safely delivers increased power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, extracting more usable power from every drop of fuel. The result is stronger acceleration, improved throttle response and smoother power delivery whether you're driving around town, touring or heading off-road. For drivers who regularly tow caravans, trailers, boats or work equipment, the additional torque reduces engine strain and provides greater pulling power when it matters most. You'll enjoy improved drivability, better towing performance and increased confidence on steep climbs and long highway journeys. Why Choose the TORQIT Power Module? Performance Gain: Up to 36kW & 91Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific tuning for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and horse floats Developed and rigorously tested for Australian conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 38kW / 82Nm Unlock the full performance of your Ford Ranger Raptor Next Gen 3.0L with the TORQIT Power Module (CRMQ2011). Purpose-built for the latest Ranger Raptor, this advanced plug-and-play performance module safely enhances power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. Designed to maximise engine efficiency, the TORQIT Power Module optimises the air-to-fuel ratio to extract more usable energy from every drop of fuel. The result is stronger acceleration, sharper throttle response and smoother power delivery, giving you greater confidence both on the road and across challenging off-road terrain. Whether you're towing a caravan, trailer, boat or carrying heavy loads, the additional torque helps minimise engine strain while improving overall drivability. From daily commuting to weekend adventures, you'll benefit from enhanced pulling power, improved responsiveness and a more refined driving experience. Why Choose the TORQIT Power Module? Performance Gain: Up to 38kW & 82Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific tuning for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and horse floats Developed and rigorously tested for Australian conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 29kW / 81Nm Take your Ford Ranger Super Duty V6 (2025+) to the next level with the TORQIT Power Module Plus (CRMQ2072). Engineered specifically for the latest Ranger Super Duty, this advanced plug-and-play performance module safely increases power, torque and fuel efficiency while maintaining factory safety parameters. Unlike conventional performance modules, the TORQIT Power Module Plus features an innovative dual-plug design that optimises both fuel pressure and boost pressure. This delivers stronger mid-range performance, improved throttle response and smoother acceleration, giving you more confidence whether you're commuting, touring or tackling demanding off-road terrain. Designed to maximise the energy extracted from every drop of fuel, the Power Module Plus enhances your engine's air-to-fuel ratio for improved efficiency and drivability. The additional torque also helps reduce engine strain when towing heavy loads, making it ideal for caravans, trailers, boats and work equipment. As Australia's first Bluetooth-enabled diesel performance module, the TORQIT Power Module Plus allows you to switch between performance modes directly from your smartphone using the TORQIT app. Choose between Fuel Economy, Standard or Maximum Performance settings, while enjoying the convenience of remote software updates and ongoing performance enhancements. Why Choose the TORQIT Power Module Plus? Performance Gain: Up to 29kW & 81Nm* Advanced dual-plug technology for fuel and boost pressure optimisation Bluetooth connectivity with smartphone app control Switch between Fuel Economy, Standard and Maximum Performance modes Plug-and-play installation with no permanent vehicle modifications Improves power, torque, throttle response and drivability Reduces engine strain when towing caravans, trailers, boats and horse floats Vehicle-specific software with remote firmware updates Circuitry manufactured in Germany Developed and rigorously tested for Australian conditions Backed by a 5-year manufacturer's warranty, including New Vehicle Warranty coverage* *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications. Warranty coverage is subject to TORQIT's terms and conditions.

Performance Gain: Up to 34kW / 75Nm Upgrade your Nissan Navara NP300 (Post-2019) with the TORQIT Power Module (CRMQ2008), a premium plug-and-play performance module engineered to deliver increased power, torque and fuel efficiency. Designed specifically for the latest Navara NP300 models, it safely optimises your vehicle's factory ECU calibration without requiring permanent modifications. By refining the engine's air-to-fuel ratio, the TORQIT Power Module extracts more usable energy from every drop of fuel, resulting in stronger acceleration, sharper throttle response and smoother power delivery. Whether you're commuting, exploring off-road tracks or using your Navara for work, you'll enjoy improved drivability and a more responsive driving experience. For drivers who regularly tow caravans, trailers, boats or heavy equipment, the additional torque helps reduce engine strain while providing greater pulling power and improved confidence on steep inclines and long-distance trips. The plug-and-play design allows for quick installation while maintaining your vehicle's factory integrity. Why Choose the TORQIT Power Module? Performance Gain: Up to 34kW & 75Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and horse floats Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 42kW / 91Nm Unlock the full performance potential of your Isuzu NPS with the TORQIT Power Module (CRMQ2070). Designed specifically for the Isuzu NPS platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module enhances your engine's air-to-fuel ratio to maximise combustion efficiency, producing stronger acceleration, improved throttle response and smoother power delivery. By extracting more energy from every drop of fuel, it delivers increased performance while maintaining the reliability your Isuzu NPS is built for. Whether your NPS is used for commercial transport, touring or towing heavy loads, the additional power and torque help reduce engine strain and improve drivability in demanding conditions. From steep inclines to fully loaded highway driving, you'll benefit from greater pulling power and improved engine responsiveness. Why Choose the TORQIT Power Module? Performance Gain: Up to 42kW & 91Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for commercial applications, caravans, trailers and heavy-duty towing Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 56kW / 67Nm Unlock the full capability of your Ford Ranger Next Gen V6 with the TORQIT Power Module (CRMQ2010). Designed specifically for the latest V6 Ranger, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU signals—without requiring ECU remapping. Installed inline with your vehicle's factory sensors, the TORQIT Power Module fine-tunes engine performance while preserving your factory settings. By optimising the air-to-fuel ratio, it extracts more energy from every drop of fuel, delivering stronger acceleration, improved throttle response and smoother power delivery throughout the rev range. Whether you're towing a caravan, trailer, boat or carrying heavy work equipment, the additional power and torque reduce engine strain while providing greater pulling power and improved drivability. Best of all, the module can be removed at any time without permanently modifying your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 56kW & 67Nm* Simple plug-and-play installation with no ECU remapping required No permanent modifications to your vehicle Can be removed without affecting factory ECU settings Increases power, torque and throttle response Improves fuel efficiency through optimised engine performance Vehicle-specific calibration for safe and reliable operation Reduces engine strain when towing caravans, trailers, boats and horse floats Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 36kW / 75Nm Boost the performance of your Isuzu D-MAX 4JJ3 3.0L (Post-2020) with the TORQIT Power Module (CRMQ2006). Specifically engineered for the latest 3.0L turbo diesel D-MAX, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery across the rev range. By extracting more usable energy from every drop of fuel, it enhances everyday drivability while maintaining the reliability expected from the Isuzu 4JJ3 engine. Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque reduces engine strain and provides greater pulling power when you need it most. From daily commuting to off-road adventures, the TORQIT Power Module delivers a noticeable improvement in performance without requiring permanent vehicle modifications. Why Choose the TORQIT Power Module? Performance Gain: Up to 36kW & 75Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing caravans, trailers, boats and heavy loads Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 31kW / 61Nm Enhance the performance of your Mazda BT-50 4JJ3 (Post-2020) with the TORQIT Power Module (CRMQ2009). Specifically engineered for the latest BT-50 platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, improved throttle response and smoother power delivery across the entire rev range. By extracting more usable energy from every drop of fuel, you'll enjoy improved performance without compromising everyday reliability. Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque helps reduce engine strain and provides greater pulling power when you need it most. From daily driving to off-road adventures, the TORQIT Power Module delivers a more responsive and enjoyable driving experience. Why Choose the TORQIT Power Module? Performance Gain: Up to 31kW & 61Nm* Simple plug-and-play installation with no permanent vehicle modifications Improves power, torque and throttle response Enhances fuel efficiency through optimised engine performance Vehicle-specific tuning for safe and reliable operation Reduces engine strain when towing caravans, trailers, boats and horse floats Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 34kW / 75Nm Unlock more power from your Nissan Navara NP300 (Pre-2019) with the TORQIT Power Module (CRMQ2007). Designed specifically for pre-2019 NP300 models, this advanced plug-and-play performance module safely enhances power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module refines your engine's air-to-fuel ratio to maximise combustion efficiency, allowing your Navara to produce more usable power while using fuel more effectively. The result is quicker throttle response, stronger acceleration and smoother power delivery for everyday driving, off-road adventures and demanding work applications. Whether you're towing a caravan, trailer, boat or carrying heavy equipment, the additional torque helps reduce engine strain while improving towing performance and overall drivability. With a simple plug-and-play installation and no permanent modifications required, it's an easy upgrade that delivers noticeable performance improvements. Why Choose the TORQIT Power Module? Performance Gain: Up to 34kW & 75Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and horse floats Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 33kW / 84Nm Maximise the capability of your Ineos Grenadier (2025+) with the TORQIT Power Module (CRMQ2073). Purpose-built for the latest Grenadier platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By extracting more usable energy from every drop of fuel, it enhances both on-road refinement and off-road performance while maintaining factory reliability. Whether you're tackling remote touring, technical off-road tracks or towing a caravan, trailer or boat, the additional power and torque provide greater pulling performance while reducing engine strain under load. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 33kW & 84Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing caravans, trailers, boats and heavy loads Ideal for touring, off-road adventures and everyday driving Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 31kW / 85Nm Unlock the full potential of your Toyota Tundra with the TORQIT Power Module (CRMQ2060). Specifically engineered for the Toyota Tundra, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. By refining the engine's air-to-fuel ratio, the TORQIT Power Module improves combustion efficiency to deliver stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is a more responsive driving experience with enhanced performance for both everyday driving and demanding towing applications. Whether you're towing a large caravan, boat, horse float or heavy trailer, the additional torque helps reduce engine strain while providing greater pulling power and improved confidence on steep inclines and long highway journeys. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 31kW & 85Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and commercial towing applications Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 34kW / 77Nm Enhance the capability of your Toyota Hilux 2.8L D4D (2016–2018) with the TORQIT Power Module (CRMQ2005). Specifically engineered for the 2.8L D4D turbo diesel engine, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module precisely adjusts the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By unlocking additional performance while maintaining factory reliability, it transforms the way your Hilux performs both on and off the road. Whether you're towing a caravan, trailer or boat, carrying heavy tools for work, or heading off-road, the increased torque helps reduce engine strain and provides greater pulling power when it matters most. Installation is completely plug-and-play, with no permanent modifications required. Why Choose the TORQIT Power Module? Performance Gain: Up to 34kW & 77Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats, off-road touring and work vehicles Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 47kW / 104Nm Transform the performance of your Toyota LandCruiser 300 Series (2016+) with the TORQIT Power Module (CRMQ2002). Engineered specifically for the LandCruiser 300 Series, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is noticeably improved drivability while maintaining the reliability and refinement expected from the LandCruiser platform. Whether you're towing a large caravan, horse float or boat, exploring Australia's toughest off-road terrain, or covering long-distance touring kilometres, the substantial increase in power and torque reduces engine strain and provides greater confidence under load. Installation is quick and completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 47kW & 104Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and everyday driving Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 33kW / 58Nm Take your Toyota Prado 2.8L Gen 3 (08/2020+) to the next level with the TORQIT Power Module (CRMQ2004). Specifically engineered for the latest 2.8L turbo diesel Prado, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module refines the engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery across the rev range. By unlocking additional performance while maintaining factory reliability, it provides a more enjoyable and capable driving experience in all conditions. Whether you're towing a caravan, camper trailer or boat, exploring remote tracks or commuting every day, the additional power and torque reduce engine strain and provide greater pulling performance when you need it most. Installation is quick and completely plug-and-play, with no permanent modifications required. Why Choose the TORQIT Power Module? Performance Gain: Up to 33kW & 58Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and everyday driving Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 35kW / 107Nm Unlock the full potential of your Toyota Hilux 2.8L Gen 3 (08/2020+) with the TORQIT Power Module (CRMQ2003). Purpose-built for the latest 2.8L turbo diesel Hilux, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is a more responsive, capable and enjoyable driving experience while maintaining the factory reliability of your Hilux. Whether you're towing a caravan, camper trailer or boat, carrying heavy loads for work, or heading off-road, the significant increase in torque reduces engine strain and provides stronger pulling power when you need it most. Installation is quick and completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 35kW & 107Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats, off-road touring and work vehicles Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 61kW / 103Nm Experience a significant performance upgrade with the TORQIT Power Module (CRMQ2001) for the Toyota LandCruiser 200 Series (2016+). Purpose-built for the LandCruiser's turbo diesel engine, this premium plug-and-play performance module safely delivers increased power, torque and improved fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module enhances the engine's air-to-fuel ratio to maximise combustion efficiency, resulting in stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. Whether driving around town or tackling long-distance touring, you'll enjoy improved drivability without compromising factory reliability. Perfect for towing large caravans, boats, horse floats or heavy work trailers, the substantial increase in power and torque helps reduce engine strain while providing greater pulling performance on steep inclines and challenging terrain. Installation is completely plug-and-play, requiring no cutting, wiring or permanent modifications. Why Choose the TORQIT Power Module? Performance Gain: Up to 61kW & 103Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and commercial applications Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 36kW / 75Nm Maximise the capability of your Toyota LandCruiser 79 Series (2016+) with the TORQIT Power Module (CRMQ2000). Purpose-built for the iconic 79 Series turbo diesel, this premium plug-and-play performance module safely delivers increased power, torque and improved fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module precisely adjusts the engine's air-to-fuel ratio to enhance combustion efficiency, producing stronger acceleration, improved throttle response and smoother power delivery throughout the rev range. The result is a more responsive LandCruiser that maintains factory reliability while offering noticeably improved performance on and off the road. Whether you're towing heavy trailers, transporting equipment on the job site or tackling Australia's toughest off-road tracks, the additional torque helps reduce engine strain and delivers greater pulling power when you need it most. Installation is fast and completely plug-and-play, requiring no cutting, wiring or permanent modifications. Why Choose the TORQIT Power Module? Performance Gain: Up to 36kW & 75Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and commercial applications Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Mitsubishi Triton MV 02/2024 Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM2850 Suits Mitsubishi Triton MV 02/2024 Current Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Heated – Heated mirror glass to demist in cold or wet conditions BSM – Blind Spot Monitoring to alert you to vehicles beside you Power Fold – Power-fold function, mirrors fold in and out with the vehicle Camera Provision – 360 degree camera provision for compatible camera systems Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Mitsubishi Triton MV 02/2024 Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM2850 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

TORQIT Airbox for TOYOTA LANDCRUISER 300 SERIES Powder Coated Matte Black (AB12SS) Part Number: AB12SS Upgrade the airflow, filtration efficiency, and engine protection of your TOYOTA LANDCRUISER 300 SERIES with the TORQIT Powder Coated Matte Black Airbox. Designed and manufactured in Australia, this premium stainless steel airbox is engineered to deliver improved airflow while ensuring your engine receives clean, filtered air for optimal performance and long-term reliability. Constructed from premium 304-grade stainless steel and finished in a durable matte black powder coat, the TORQIT Airbox is built to withstand harsh off-road conditions, water crossings, and extreme under-bonnet temperatures. Its high-capacity design promotes increased airflow and filtration efficiency, helping your LANDCRUISER perform at its best whether towing, touring, or tackling remote tracks. Key Features Designed specifically for TOYOTA LANDCRUISER 300 SERIES models Premium 304-grade stainless steel construction Durable matte black powder-coated finish CNC folded and laser-cut design Raised and tapered lid for increased airflow capacity Integrated Donaldson water drainage valve Uses the factory air filter for simple servicing Quick-release clips provide tool-free air filter access Utilises factory rubber mounting points for straightforward installation Simple bolt-on installation Backed by a 5-year warranty Engineered for Maximum Airflow Unlike many aftermarket airboxes that simply increase filter size, the TORQIT Airbox incorporates a raised and tapered lid design to increase internal air capacity. This allows the air filter to operate more efficiently, maximising airflow and filtration performance while helping maintain consistent engine efficiency. The result is improved engine breathing, enhanced throttle response, and superior filtration performance to help protect critical engine components from dust and contaminants. Built for Australian Conditions Manufactured from stainless steel up to 2mm thick, the TORQIT Airbox is built to handle Australia's harshest touring and off-road environments. The robust construction resists corrosion, heat, and vibration while maintaining structural integrity over years of demanding use. An integrated Donaldson Water Evacuator assists in draining water that enters the airbox, helping provide additional protection during wet and muddy driving conditions. Vehicle Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Compatible with TORQIT snorkel systems and factory intake components Designed to work with the factory air filter Installation The airbox is designed as a direct bolt-on upgrade using factory rubber mounting points and the factory air filter. Quick-release clips provide easy access to the filter without requiring tools, simplifying routine maintenance and servicing. Important Information Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and powder coating are completed to order and may require additional processing time before dispatch. Warranty 5-Year Manufacturer Warranty Designed and manufactured in Australia Built for long-term durability and performance Why Upgrade? The TORQIT AB12SS Powder Coated Matte Black Airbox delivers improved airflow, enhanced filtration efficiency, and superior engine protection for your LANDCRUISER 300 SERIES. Its premium stainless steel construction, high-capacity design, and durable matte black finish make it the ideal upgrade for serious touring, towing, and off-road applications.

TORQIT Stainless Steel Snorkel – TOYOTA LANDCRUISER 300 SERIES Part Number: SN12SS TORQIT’s Stainless Steel Snorkel is a fully sealed, one-piece construction designed to maximise airflow and protect your engine in harsh conditions. Australian-designed and rigorously tested, it is built to handle demanding off-road environments. By elevating your vehicle’s air intake, the snorkel improves air quality entering the engine, resulting in better performance, efficiency, and potential fuel savings. It also acts as essential protection when driving through dust or water crossings, reducing engine wear and extending vehicle lifespan. Key Benefits Improved engine performance and airflow Protection against dust and water ingestion Reduced engine wear and maintenance Enhanced fuel efficiency and longevity Premium Stainless Steel Construction Manufactured from 304 grade stainless steel, each snorkel is mandrel bent from a single piece to ensure a fully sealed unit with no joins. The smooth internal diameter maximises airflow, while the streamlined external design reduces snagging when off-road. Mandrel bent one-piece construction Fully sealed design for maximum protection High structural rigidity for extreme conditions Corrosion-resistant and temperature stable Designed for Australian Conditions Tested in harsh environments, TORQIT snorkels maintain strength in extreme temperatures without warping or corroding. The durable construction ensures long-term reliability for serious off-road use. Features Heavy-duty stainless steel with strong mounting brackets Choice of brushed stainless or satin black powder coat finish DIY installation with vehicle-specific fitting template Includes rust-proof paint for guard cut and rubber pinch weld Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Compatible with factory or TORQIT stainless steel airbox Works with most roof racks and light bars Warranty 5-year product warranty Does not void factory vehicle warranty Why Upgrade? Upgrading to a TORQIT Stainless Steel Snorkel enhances airflow, improves engine efficiency, and adds a durable, premium look to your vehicle—making it an essential upgrade for off-road and touring setups.

TORQIT Powder Coated Matte Black Snorkel for TOYOTA LANDCRUISER 300 SERIES – Standard Airbox (SN12SS) Part Number: SN12SS The TORQIT Powder Coated Matte Black Snorkel is engineered specifically for the TOYOTA LANDCRUISER 300 SERIES equipped with the factory standard airbox. Featuring a fully sealed, one-piece stainless steel construction with a durable matte black powder-coated finish, this snorkel is designed to maximise airflow while protecting your engine from dust, water, and harsh off-road conditions. Australian-designed and extensively tested, the SN12SS delivers reliable performance in demanding environments, making it an essential upgrade for touring, towing, and off-road adventures. Key Benefits Improved engine airflow and performance Protects against dust, water, and debris ingestion Reduces engine wear and maintenance costs Helps maintain engine efficiency and longevity Premium matte black powder-coated finish Fully sealed design for maximum protection Mandrel-bent one-piece construction Exceptional strength and structural rigidity Built for Australian Conditions Designed to withstand Australia's toughest environments, the TORQIT snorkel maintains its strength and appearance in extreme temperatures and harsh weather conditions. The powder-coated finish provides additional protection while delivering a sleek, factory-style appearance. Features Durable matte black powder-coated finish Strong mounting brackets for secure installation Vehicle-specific fitting template included Includes rust-proof paint for guard cut protection Rubber pinch weld supplied for a professional finish Fully sealed system for maximum engine protection Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Designed for vehicles equipped with the factory standard airbox Compatible with most roof racks and light bars Warranty 5-Year Product Warranty Does not void factory vehicle warranty Why Upgrade? The TORQIT SN12SS Powder Coated Matte Black Snorkel improves airflow to your LANDCRUISER 300 SERIES while providing critical protection during dusty tracks, water crossings, and challenging off-road conditions. Its premium matte black finish, durable construction, and Australian-engineered design make it a practical and stylish upgrade for any serious touring setup.

TORQIT Powder Coated Matte Black Snorkel for TOYOTA LANDCRUISER 300 SERIES – Standard Airbox (SN12SS) Part Number: SN12SS The TORQIT Powder Coated Matte Black Snorkel is engineered specifically for the TOYOTA LANDCRUISER 300 SERIES equipped with the factory standard airbox. Featuring a fully sealed, one-piece stainless steel construction with a durable matte black powder-coated finish, this snorkel is designed to maximise airflow while protecting your engine from dust, water, and harsh off-road conditions. Australian-designed and extensively tested, the SN12SS delivers reliable performance in demanding environments, making it an essential upgrade for touring, towing, and off-road adventures. Key Benefits Improved engine airflow and performance Protects against dust, water, and debris ingestion Reduces engine wear and maintenance costs Helps maintain engine efficiency and longevity Premium matte black powder-coated finish Fully sealed design for maximum protection Mandrel-bent one-piece construction Exceptional strength and structural rigidity Built for Australian Conditions Designed to withstand Australia's toughest environments, the TORQIT snorkel maintains its strength and appearance in extreme temperatures and harsh weather conditions. The powder-coated finish provides additional protection while delivering a sleek, factory-style appearance. Features Durable matte black powder-coated finish Strong mounting brackets for secure installation Vehicle-specific fitting template included Includes rust-proof paint for guard cut protection Rubber pinch weld supplied for a professional finish Fully sealed system for maximum engine protection Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Designed for vehicles equipped with the factory standard airbox Compatible with most roof racks and light bars Warranty 5-Year Product Warranty Does not void factory vehicle warranty Why Upgrade? The TORQIT SN12SS Powder Coated Matte Black Snorkel improves airflow to your LANDCRUISER 300 SERIES while providing critical protection during dusty tracks, water crossings, and challenging off-road conditions. Its premium matte black finish, durable construction, and Australian-engineered design make it a practical and stylish upgrade for any serious touring setup.

Focal SUB 20 SF 8" Slatefiber Subwoofer The Focal SUB 20 SF is a premium 8-inch (200mm) passive subwoofer engineered to deliver powerful, accurate and controlled bass performance in compact vehicle audio installations. Part of Focal’s second-generation Slatefiber range, the SUB 20 SF combines advanced French acoustic engineering with innovative cone technology to provide deep low-frequency response while maintaining the speed, precision and musicality that Focal is renowned for. Manufactured in France, the Slatefiber cone is constructed from recycled carbon fibres combined with thermoplastic polymer. This exclusive material delivers the ideal balance of rigidity, lightweight construction and damping, allowing the subwoofer to reproduce bass frequencies with excellent control, reduced distortion and impressive responsiveness. Designed for sealed and vented enclosure applications, the SUB 20 SF offers exceptional versatility for custom car audio installations where space is limited but performance remains a priority. Its compact 8-inch format makes it suitable for boot installations, spare wheel well enclosures and integrated audio upgrades while still providing strong low-end impact and musical accuracy. With 200W RMS power handling, 400W maximum power, a 4 Ohm impedance and a robust ferrite motor assembly, the SUB 20 SF delivers reliable performance when paired with a quality monoblock or multi-channel amplifier. The durable butyl surround further enhances control and long-term reliability, ensuring consistent performance across a wide range of listening conditions. Key Features Premium 8" (200mm) passive subwoofer French-made Slatefiber cone technology 200W RMS power handling 400W maximum power handling 4 Ohm impedance 52mm (2") voice coil Ferrite motor structure Durable butyl rubber surround Compact design ideal for space-conscious installations Designed for accurate, controlled and dynamic bass reproduction Suitable for sealed and vented enclosure applications Manufactured in France Performance Benefits Deep and controlled bass response Fast transient response for greater musical accuracy Excellent low-frequency extension without excessive distortion Compact size for flexible installation options Seamless integration with Slatefiber speaker systems Ideal for SQ-focused and daily driving audio systems Technical Specifications Product Type Passive Subwoofer Series Slatefiber Subwoofer Size 8" (200mm) Cone Material Slatefiber RMS Power Handling 200W Maximum Power Handling 400W Nominal Impedance 4 Ohm Sensitivity 87dB (2.83V/1m) Voice Coil Diameter 52mm (2") Motor Type Ferrite Surround Material Butyl Rubber Installation Position Boot, Spare Wheel Well, Custom Enclosures Country of Manufacture France What's Included 1 x Focal SUB 20 SF 8" (200mm) Slatefiber Subwoofer Why Choose the Focal SUB 20 SF? The SUB 20 SF is designed for enthusiasts who want premium bass performance without sacrificing installation flexibility. Its compact footprint, advanced Slatefiber cone technology and high-power handling capabilities make it an ideal solution for upgrading factory audio systems or complementing a high-end Focal speaker setup. Delivering the signature Focal balance of precision, dynamics and musicality, the SUB 20 SF provides powerful low-frequency reinforcement while maintaining the detail and accuracy needed for a truly immersive listening experience.

Focal 165 SF3 6.5" Slatefiber 3-Way Component Speaker Kit The Focal 165 SF3 is a premium 165mm (6.5") 3-way component speaker system designed to deliver exceptional detail, accuracy and immersion throughout the entire frequency range. Combining a dedicated 165mm Slatefiber woofer, 65mm midrange driver and Focal’s renowned aluminium/magnesium inverted dome tweeter, the 165 SF3 creates a wide and realistic soundstage with remarkable clarity from deep bass through to delicate high frequencies. Manufactured in France, the Slatefiber cone technology uses recycled carbon fibres blended with thermoplastic polymer to achieve an ideal balance of rigidity, lightness and damping. This advanced construction helps reduce unwanted resonance while improving transient response, delivering natural vocals, precise instrumentation and controlled bass performance. The dedicated 65mm midrange driver enhances vocal presence and instrument separation, allowing music to sound more open, detailed and realistic. Combined with the aluminium/magnesium inverted dome tweeter, the system produces smooth and refined high frequencies while maintaining excellent definition and listening comfort. Designed for flexibility and ease of installation, the 165 SF3 features separable crossovers and adjustable tweeter level settings of -3dB, 0dB and +3dB to suit different vehicle interiors and listening preferences. The system also incorporates an aluminium rotor design frame, durable butyl surrounds and premium construction throughout, ensuring long-term reliability and outstanding acoustic performance. Key Features Premium 165mm (6.5") 3-way component speaker system French-made Slatefiber woofer cone technology Dedicated 65mm midrange driver for enhanced vocal detail Aluminium/Magnesium inverted dome tweeter Wide and immersive soundstage reproduction 80W RMS power handling 160W maximum power handling 4 Ohm impedance 91dB sensitivity 55Hz – 21kHz frequency response Adjustable tweeter levels: -3dB / 0dB / +3dB Separable crossover design for installation flexibility Ferrite motor structure Butyl surround for durability and stability Premium aluminium frame construction Suitable for high-end factory and custom audio upgrades Performance Benefits Dedicated midrange driver improves vocal clarity and realism Enhanced soundstage width and imaging accuracy Detailed and natural reproduction across the entire frequency spectrum Controlled bass response with excellent midrange definition Smooth and refined treble performance Ideal for audiophile-level car audio system upgrades Technical Specifications Product Type 3-Way Component Speaker Kit Woofer Size 165mm (6.5") Midrange Size 65mm Cone Material Slatefiber Tweeter Type Aluminium/Magnesium Inverted Dome Voice Coil Diameter 25mm Frequency Response 55Hz – 21kHz Sensitivity 91dB Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Power Handling 160W Tweeter Level Adjustment -3dB / 0dB / +3dB Crossover Type Separable Motor Type Ferrite Surround Material Butyl Mounting Depth 70mm Frame Construction Aluminium Rotor Design What's Included 2 x Focal 165mm Slatefiber Woofers 2 x 65mm Midrange Speakers 2 x Aluminium/Magnesium Inverted Dome Tweeters 2 x Separable Crossovers Mounting Brackets Installation Screws Installation Hardware Premium Construction & Installation Flexibility The 165 SF3 has been engineered for straightforward integration into a wide range of vehicles. Its dedicated 65mm midrange driver is particularly suited to installations in select General Motors, Toyota and Mercedes-Benz models, while the separable crossover design allows installers greater flexibility when positioning components for optimum performance. Combined with Focal’s premium materials, advanced acoustic engineering and renowned French manufacturing quality, the 165 SF3 delivers an immersive listening experience with exceptional balance, dynamics and precision throughout the entire frequency range.

Focal 200 SF 8" Slatefiber 2-Way Component Speaker Kit The Focal 200 SF is a premium 200mm (8") 2-way component speaker kit engineered for drivers seeking a powerful and dynamic upgrade over factory-installed audio systems. As part of Focal’s renowned Slatefiber range, the 200 SF combines a large-format Slatefiber woofer with an aluminium/magnesium inverted dome tweeter to deliver impressive bass response, detailed midrange reproduction and refined high-frequency performance. Designed and manufactured in France, the Slatefiber woofer cone utilises recycled carbon fibres blended with thermoplastic polymer to achieve the ideal balance of rigidity, lightweight construction and damping. The larger 200mm driver provides greater low-frequency output and improved mid-bass impact, making it an excellent choice for vehicles capable of accommodating an 8-inch speaker upgrade. High frequencies are handled by Focal’s aluminium/magnesium inverted dome tweeter, delivering smooth and precise treble without harshness. Adjustable tweeter level settings of -3dB, 0dB and +3dB allow fine-tuning to suit different vehicle acoustics and personal listening preferences, ensuring optimal sound quality throughout the cabin. With separable crossovers for flexible installation, 80W RMS power handling, 160W maximum power and 91dB sensitivity, the Focal 200 SF provides excellent performance when paired with a quality amplifier or upgraded audio system. Its durable butyl surround, ferrite motor structure and robust aluminium chassis ensure reliable long-term performance while maintaining Focal’s signature sound quality. Key Features Premium 200mm (8") 2-way component speaker kit French-made Slatefiber woofer cone technology Larger 8" woofer for enhanced bass response and impact Aluminium/Magnesium inverted dome tweeter Exceptional clarity, imaging and soundstage performance 80W RMS power handling 160W maximum power handling 4 Ohm impedance 91dB sensitivity 60Hz – 21kHz frequency response Adjustable tweeter levels: -3dB / 0dB / +3dB Separable crossover design for flexible installation Ferrite motor structure Butyl surround for durability and control Ideal for premium car audio system upgrades Performance Benefits Stronger bass response compared to smaller component speaker kits Natural vocal reproduction and detailed midrange clarity Smooth and refined high-frequency performance Improved soundstage and stereo imaging Excellent efficiency for use with factory or aftermarket amplification Built for long-term reliability and consistent performance Technical Specifications Product Type 2-Way Component Speaker Kit Woofer Size 200mm (8") Cone Material Slatefiber Tweeter Type Aluminium/Magnesium Inverted Dome Voice Coil Diameter 25mm Frequency Response 60Hz – 21kHz Sensitivity 91dB Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Power Handling 160W Tweeter Level Adjustment -3dB / 0dB / +3dB Crossover Type Separable Motor Type Ferrite Surround Material Butyl Mounting Depth 70mm Speaker Depth 63mm Grilles Included Yes What's Included 2 x Focal 200 SF 200mm Slatefiber Woofers 2 x Aluminium/Magnesium Inverted Dome Tweeters 2 x Separable Crossovers Protective Speaker Grilles Mounting Brackets Installation Screws Installation Hardware Documentation Why Choose Focal Slatefiber? Focal’s Slatefiber technology combines recycled carbon fibres with advanced thermoplastic materials to create a speaker cone that is both lightweight and exceptionally rigid. This unique construction minimises unwanted resonance while improving accuracy, delivering cleaner vocals, stronger bass response and greater musical detail across the entire frequency range. Designed and manufactured in France, the Focal 200 SF is an ideal solution for enthusiasts seeking a larger-format speaker upgrade that combines powerful bass performance with the clarity, precision and reliability that Focal is known for worldwide.

Focal 165 SF 6.5" Slatefiber 2-Way Component Speaker Kit The Focal 165 SF is a premium 165mm (6.5") 2-way component speaker kit designed to deliver a significant upgrade over factory-installed audio systems. Part of Focal’s acclaimed Slatefiber range, the 165 SF combines advanced French acoustic engineering with premium materials to produce exceptional clarity, accurate vocals and dynamic sound performance throughout the vehicle cabin. At the heart of the system is Focal’s innovative Slatefiber woofer cone, manufactured in France using recycled carbon fibres and thermoplastic polymer. This unique construction provides an ideal balance of rigidity, lightweight performance and damping characteristics, resulting in clean midrange reproduction, controlled bass response and impressive musical detail. Complementing the woofer is Focal’s renowned aluminium/magnesium inverted dome tweeter, engineered to deliver smooth and detailed high frequencies without harshness. Adjustable tweeter level settings of -3dB, 0dB and +3dB allow the system to be tailored to different vehicle acoustics and personal listening preferences. With separable crossovers, flexible installation options and high sensitivity performance, the 165 SF integrates easily into both factory and aftermarket systems. Delivering 80W RMS power handling, 160W maximum power and a wide 60Hz–21kHz frequency response, this component kit offers exceptional sound quality for enthusiasts seeking greater realism, imaging and overall musical enjoyment. Key Features Premium 165mm (6.5") 2-way component speaker kit French-made Slatefiber woofer cone technology Aluminium/Magnesium inverted dome tweeter Exceptional vocal clarity and soundstage performance 80W RMS power handling 160W maximum power handling 4 Ohm impedance 91dB sensitivity 60Hz – 21kHz frequency response Adjustable tweeter levels: -3dB / 0dB / +3dB Separable crossover design for flexible installation Ferrite motor structure Butyl surround for durability and control Suitable for premium factory audio upgrades and custom installations Performance Benefits Improved clarity and detail across all music genres Natural vocal reproduction and enhanced imaging Controlled mid-bass response with reduced distortion Smooth and refined high-frequency performance High sensitivity for strong output with factory or aftermarket amplification Designed for long-term reliability and consistent sound quality Technical Specifications Product Type 2-Way Component Speaker Kit Woofer Size 165mm (6.5") Cone Material Slatefiber Tweeter Type Aluminium/Magnesium Inverted Dome Voice Coil Diameter 25mm Frequency Response 60Hz – 21kHz Sensitivity 91dB Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Power Handling 160W Tweeter Level Adjustment -3dB / 0dB / +3dB Crossover Type Separable Motor Type Ferrite Surround Material Butyl Mounting Depth 70mm Cut-Out Diameter 165mm What's Included 2 x Focal 165 SF 165mm Slatefiber Woofers 2 x Aluminium/Magnesium Inverted Dome Tweeters 2 x Separable Crossovers Protective Speaker Grilles Mounting Brackets Installation Screws Installation Accessories Why Choose Focal Slatefiber? Focal’s Slatefiber technology combines recycled carbon fibres with advanced thermoplastic materials to create a cone that is lightweight, rigid and highly controlled. The result is exceptional sound accuracy, improved detail retrieval and a more natural listening experience compared to conventional speaker materials. Designed and manufactured in France, the Focal 165 SF is an ideal upgrade for drivers seeking premium sound quality, enhanced musical detail and long-lasting performance from their vehicle’s audio system.

Focal C 165 SF Slatefiber 6.5" 2-Way Component Speakers The Focal C 165 SF is a premium 6.5-inch (165mm) 2-way component speaker system designed to deliver exceptional clarity, detailed midrange reproduction and dynamic performance for discerning car audio enthusiasts. Featuring Focal’s innovative Slatefiber cone technology, the C 165 SF combines rigidity, lightweight construction and excellent damping characteristics to produce a natural, balanced and highly detailed listening experience. Manufactured in France, the Slatefiber cone uses recycled carbon fibres blended with thermoplastic polymer to achieve outstanding acoustic performance while maintaining low distortion and excellent responsiveness. Combined with Focal’s advanced motor design and butyl rubber surround, the speaker delivers accurate vocals, powerful midbass and impressive overall musicality. With 80W RMS power handling, 160W maximum power, 89.4dB sensitivity and a wide frequency response extending from 60Hz to 21kHz, the C 165 SF offers impressive efficiency and performance across a broad range of music styles. The compact design allows seamless integration into factory and aftermarket installations while maintaining Focal’s renowned sound quality. Key Features Premium 6.5" (165mm) 2-way component speaker system French-made Slatefiber cone technology Natural and highly detailed sound reproduction 80W RMS power handling 160W maximum program power 4 Ohm impedance Wide 60Hz – 21kHz frequency response 89.4dB sensitivity for efficient performance Ferrite motor structure Butyl rubber surround for durability and stability Excellent midbass impact and vocal clarity Ideal for factory audio upgrades and premium custom systems Performance Benefits Exceptional clarity and natural tonal balance Detailed vocal reproduction and precise imaging Strong midbass response with low distortion High sensitivity for improved output from factory or aftermarket amplifiers Designed for accurate and engaging musical performance Technical Specifications Speaker Type 2-Way Component Speaker System Nominal Diameter 6.5" (165mm) Cone Material Slatefiber Frequency Response 60Hz – 21kHz Sensitivity 89.4dB (1W/1m) Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Program Power 160W Resonance Frequency (Fs) 67Hz Total Q Factor (Qts) 0.58 Linear Excursion (Xmax) ±4mm Voice Coil Diameter 25mm Voice Coil Former Kapton Voice Coil Material Copper Magnet Material Ferrite Effective Cone Area (Sd) 132cm² Equivalent Compliance Volume (Vas) 11.8L Mounting Depth 70mm Cut-Out Diameter 144mm Overall Diameter 165mm Overall Depth 81mm Net Weight 1.05kg Why Choose Focal Slatefiber? Focal’s Slatefiber technology delivers a unique combination of rigidity, lightness and damping that allows the speaker to reproduce music with outstanding precision and realism. The result is cleaner vocals, tighter bass response and a more immersive listening experience compared to conventional speaker materials. Designed and manufactured in France, the Focal C 165 SF is an excellent upgrade for drivers seeking premium sound quality, improved detail and long-term reliability from their vehicle’s audio system.

Focal 65 SF 65mm Slatefiber Midrange Speaker The Focal 65 SF is a premium 65mm midrange speaker designed to deliver exceptional vocal clarity, accurate detail and dynamic sound performance in high-quality car audio systems. Featuring Focal’s innovative French-made Slatefiber cone technology, the 65 SF combines rigidity, lightweight construction and controlled damping to reproduce midrange frequencies with remarkable balance and precision. Its compact size makes it ideal for factory speaker replacements, custom audio installations and multi-speaker system upgrades where installation space is limited. Whether used as part of a complete sound system or a dedicated midrange solution, the Focal 65 SF helps create a wider, more natural and immersive in-car soundstage. Engineered with a powerful neodymium motor and durable butyl surround, the 65 SF maintains excellent control and stability even at higher listening levels. With 40W RMS power handling, 80W maximum power and a frequency response of 250Hz to 11kHz, it integrates seamlessly into premium audio systems requiring detailed and accurate midrange reproduction. Key Features 65mm compact midrange speaker French-made Focal Slatefiber cone technology Clear, detailed and natural midrange reproduction 40W RMS power handling 80W maximum power handling 4 Ohm impedance 250Hz – 11kHz frequency response Durable butyl surround for stability and longevity Neodymium motor for high performance in a compact design Ideal for premium car audio upgrades and custom installations Supplied with mounting brackets and installation screws Performance Benefits Enhanced vocal clarity and midrange detail Accurate sound reproduction with low distortion Compact design for flexible installation options Excellent integration into active and passive audio systems Designed for high-end sound quality applications Specifications Product Type Midrange Speaker Speaker Size 65mm Cone Material Slatefiber Voice Coil Diameter 25mm Frequency Response 250Hz – 11kHz Impedance 4 Ohm RMS Power 40W Maximum Power 80W Sensitivity 87dB Motor Type Neodymium Surround Material Butyl Mounting Depth 34.8mm What's Included 1 x Focal 65 SF 65mm Slatefiber Midrange Speaker Mounting brackets Installation screws Designed and manufactured using Focal's renowned acoustic expertise, the 65 SF delivers precise and engaging midrange performance for enthusiasts seeking greater clarity, realism and balance from their vehicle's audio system.

Alpine BRV-S40C BassRev 4" 2-Way Component Speakers with HEDGE Surround Technology Experience premium sound quality from a compact speaker upgrade with the Alpine BRV-S40C BassRev 4" 2-Way Component Speaker System. Designed using Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology that delivers enhanced bass performance while preserving the exceptional clarity, detail, and accuracy that Alpine is known for. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S40C produces rich sound with surprising low-frequency performance from a compact speaker format. Ideal for factory speaker replacement applications, these speakers offer a significant upgrade in overall audio quality and listening enjoyment. Key Features 4" (125mm) 2-Way Component Speaker System designed for superior audio performance in compact installations. Exclusive HEDGE Surround Technology increases cone excursion for enhanced bass response. Lightweight Polypropylene Woofer Cone provides rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth and detailed high-frequency reproduction. Large 75mm Strontium Ferrite Magnet Structure improves efficiency and speaker control. 25mm Woofer Voice Coil supports improved power handling and dynamic output. High-Quality Audio-Grade Tweeter Crossover Network for seamless frequency integration. Neodymium Tweeter Magnets ensure precise and articulate treble response. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise speaker excursion while maintaining precise control. The BRV-S40C can achieve up to 20mm of maximum linear excursion, delivering impressive bass performance within the critical 67Hz–120Hz range. This advanced surround design enables deeper bass output, improved punch, and greater sound pressure levels compared to conventional factory speakers, creating a fuller and more engaging listening experience. Lightweight Polypropylene Woofer Cone The BRV-S40C features a specially engineered polypropylene woofer cone that combines lightweight construction with excellent rigidity. This design effectively resists unwanted resonance and vibration, allowing the speaker to maintain clean, balanced sound reproduction even at higher volume levels. The result is improved bass accuracy, enhanced midrange clarity, and lower distortion across the entire frequency range. Large Magnet Structure for Increased Output Built with a large 75mm Strontium Ferrite magnet and oversized 25mm voice coil, the BRV-S40C is designed to maximise speaker control and efficiency. This powerful motor structure works together with Alpine’s HEDGE surround technology to deliver stronger bass response, increased output capability, and greater overall sound performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with exceptional precision. Featuring lightweight polyester diaphragms and powerful Neodymium magnets, the tweeters deliver smooth, natural, and highly detailed high-frequency reproduction. Enjoy wider sound staging, improved imaging, and enhanced musical detail without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S40C tweeters feature removable housings and trim rings that allow compact installation into many factory tweeter locations. Suitable mounting positions include: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexible design allows installers to maintain a factory-style appearance with minimal modification while achieving optimal sound performance. OPTIM™Sync Technology Compatibility The BRV-S40C is compatible with Alpine’s advanced OPTIM™Sync processing when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock deeper bass extension, improved tonal balance, and enhanced overall audio performance. Technical Specifications Model Alpine BRV-S40C Speaker Type 2-Way Component Speaker System Woofer Size 4" (125mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 25mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 75mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 120 Watts RMS Power Handling 40 Watts RMS (CTA-2031 Compliant) Frequency Response 75Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 40W RMS Per Channel Woofer Dimensions Frame Diameter 10.08 cm Cut-Out Diameter 9.5 cm Mounting Depth 4.49 cm Mounting Height 0.69 cm Magnet Diameter 7.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S40C 4" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S40C? Advanced HEDGE surround technology for enhanced bass performance Premium polypropylene woofer cone for accurate sound reproduction Large magnet structure and 25mm voice coil for improved output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design Compatible with Alpine OPTIM™Sync DSP tuning technology Excellent factory speaker replacement solution Legendary Alpine sound quality and reliability The Alpine BRV-S40C BassRev 4" Component Speaker System delivers impressive bass, exceptional clarity, and detailed high-frequency performance in a compact package, making it the perfect upgrade for drivers seeking premium sound quality from factory speaker locations.

Alpine BRV-S65C BassRev 6.5" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's sound system with the Alpine BRV-S65C BassRev 6.5" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering deeper bass response, improved cone control, and exceptional sound clarity while maintaining Alpine’s renowned audio precision. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S65C provides rich low frequencies, detailed vocals, and crystal-clear highs. Designed as a premium factory speaker replacement, these speakers offer a significant upgrade in performance for a wide variety of vehicles. Key Features 6.5" (165mm) 2-Way Component Speaker System engineered for superior audio performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper and more impactful bass. Lightweight Polypropylene Woofer Cone delivers excellent rigidity with reduced distortion. 1" Polyester Soft Dome Tweeters reproduce smooth and detailed high frequencies. Large Strontium Ferrite Magnet Structure improves efficiency and speaker control. 40mm Woofer Voice Coil supports increased power handling and dynamic output. High-Quality Audio-Grade Crossover Network ensures seamless integration between woofer and tweeter frequencies. Neodymium Tweeter Magnets provide precise and articulate treble reproduction. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP Amplifier. Revolutionary HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise low-frequency performance. By allowing greater cone travel while maintaining exceptional control, the BRV-S65C achieves impressive bass output within the critical 40Hz–80Hz range. Capable of achieving up to 28mm of maximum linear excursion, these speakers produce powerful bass response that adds depth and impact to your music without compromising overall sound quality. Lightweight Polypropylene Woofer Cone The BRV-S65C features a durable polypropylene woofer cone designed to remain lightweight yet highly rigid. This advanced cone material effectively resists unwanted resonance and vibration, allowing for accurate and balanced sound reproduction even during demanding listening conditions. The result is cleaner bass response, improved midrange detail, and lower distortion at higher volume levels. Large Magnet Motor Structure Equipped with oversized 95mm Strontium Ferrite magnets and large 40mm voice coils, the BRV-S65C is built to deliver enhanced speaker control, increased efficiency, and greater sound pressure levels. Combined with HEDGE surround technology, this powerful motor structure produces louder, punchier sound with improved low-frequency extension. Polyester Soft Dome Tweeters with Neodymium Magnets The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with outstanding precision. Lightweight polyester diaphragms combined with powerful Neodymium magnets provide exceptional clarity, smoothness, and accuracy throughout the high-frequency range. Enjoy improved sound staging, wider imaging, and immersive listening performance with every drive. OEM-Friendly Tweeter Installation The BRV-S65C tweeters are designed for versatile installation with removable housings and trim rings that reduce overall size for OEM integration. This compact design allows installation into many factory tweeter locations including: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexibility enables a clean, factory-style appearance with minimal modification required. OPTIM™Sync Technology Compatibility The BRV-S65C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies dynamic bass enhancement and speaker-specific equalisation profiles to unlock deeper bass performance, smoother tonal balance, and improved overall sound quality. Technical Specifications Model Alpine BRV-S65C Speaker Type 2-Way Component Speaker System Woofer Size 6.5" (165mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 40mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 95mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 38Hz – 20kHz Impedance 4 Ohms Sensitivity 84dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 16.5 cm Cut-Out Diameter 15.6 cm Mounting Depth 7.13 cm Mounting Height 1.09 cm Magnet Diameter 9.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S65C 6.5" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S65C? Advanced HEDGE surround technology for powerful bass performance Premium polypropylene woofer cone for accurate sound reproduction Large 40mm voice coil and 95mm magnet structure for increased output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design for factory locations Compatible with Alpine OPTIM™Sync DSP processing Excellent factory speaker replacement upgrade Legendary Alpine engineering and sound quality The Alpine BRV-S65C BassRev 6.5" Component Speaker System delivers deep bass, exceptional clarity, and premium sound quality, making it the ideal upgrade for drivers seeking an immersive and powerful in-car audio experience.

Alpine BRV-S80C BassRev 8" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's audio performance with the Alpine BRV-S80C BassRev 8" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering powerful bass response while maintaining the exceptional clarity, detail, and precision Alpine is renowned for. Designed as a premium factory speaker replacement, the BRV-S80C combines an 8-inch lightweight polypropylene woofer with a precision 1-inch polyester soft dome tweeter to produce deep bass, detailed midrange frequencies, and crystal-clear highs. Whether powered by a factory head unit or aftermarket amplifier, these speakers deliver immersive sound with outstanding balance and dynamic performance. Key Features 8" (200mm) 2-Way Component Speaker System engineered for superior sound quality and bass performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper, more impactful bass. Lightweight Polypropylene Woofer Cone provides excellent rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth, detailed high-frequency reproduction. Large Strontium Ferrite Magnets increase driver force and efficiency. High-Quality Audio-Grade Tweeter Crossovers ensure seamless frequency integration. Neodymium Tweeter Magnets offer precise and articulate high-frequency response. Flush Mount & OEM-Friendly Tweeter Design for easy installation in factory locations. Compatible with Alpine OPTIM™8 DSP for advanced OPTIM™Sync bass optimisation. Ideal Factory Speaker Upgrade for a wide range of vehicles. All-New HEDGE Surround Technology At the heart of the BRV-S80C is Alpine’s revolutionary HEDGE (High Excursion Design Gathered Edge) surround technology. Specifically engineered to maximise low-frequency output, HEDGE dramatically increases cone travel while maintaining control and accuracy. The result is powerful bass response within the critical 35Hz–80Hz frequency range, delivering impressive low-end impact and a maximum linear excursion peak of 28mm. You'll experience bass that is not only heard but felt, without sacrificing clarity or balance. Lightweight Polypropylene Woofer Cone The BRV-S80C utilises a specially engineered polypropylene woofer cone that combines lightweight construction with exceptional rigidity. This advanced material minimises unwanted resonance and distortion while maintaining structural integrity under demanding listening conditions. Even at high volume levels and large cone excursions, the woofer reproduces music with smooth, accurate, and balanced performance across the entire frequency spectrum. Large Magnet Structure for Greater Output Featuring oversized 100mm Strontium Ferrite magnets and large 35mm voice coils, the BRV-S80C is built to deliver increased cone control and higher sound pressure levels. Combined with Alpine’s HEDGE surround technology, this powerful motor structure enables louder output, improved efficiency, and deeper bass performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters provide exceptional high-frequency detail and smooth tonal balance. Designed with lightweight polyester diaphragms and powerful Neodymium magnets, these tweeters accurately reproduce subtle musical details, transients, and harmonics for an expansive and immersive listening experience. The result is precise imaging, excellent sound staging, and crystal-clear highs without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S80C tweeters feature a collapsible housing and removable trim ring, allowing installation into many factory tweeter locations including: A-Pillar Mounts Mirror Sail Panels Factory Tweeter Pods Door Trim Locations This flexible design enables a clean, factory-style installation while preserving the vehicle's original interior appearance. OPTIM™Sync Compatible Performance The BRV-S80C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. This advanced processing platform intelligently applies dynamic bass enhancement and custom equalisation profiles specifically tuned for BassRev speakers, unlocking deeper bass, improved tonal balance, and enhanced overall performance. Technical Specifications Model Alpine BRV-S80C Speaker Type 2-Way Component Speaker System Woofer Size 8" (200mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 35mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 100mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 35Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 20.96 cm Cut-Out Diameter 19.7 cm Mounting Depth 8.55 cm Mounting Height 1.09 cm Magnet Diameter 10.0 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S80C 8" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S80C? Advanced HEDGE surround technology for deeper bass response Premium polypropylene woofer for clean, distortion-free sound Powerful Strontium Ferrite magnet motor structure Detailed and smooth polyester soft dome tweeters OEM-friendly installation design OPTIM™Sync compatibility for enhanced bass performance Perfect upgrade from factory vehicle speakers Legendary Alpine engineering and sound quality The Alpine BRV-S80C BassRev 8" Component Speaker System delivers the ideal balance of powerful bass, detailed highs, and exceptional clarity, making it the perfect audio upgrade for drivers seeking premium sound performance in any vehicle.

Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer with 400W RMS Amplifier & OPTIM™Sync DSP Experience powerful, controlled bass without sacrificing valuable cargo space with the Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer. Developed from Alpine’s decades of acoustic engineering expertise, the PWV-SB10 combines advanced DSP processing, premium enclosure construction, and high-output performance to deliver deep, impactful bass while maintaining Alpine’s renowned sound clarity and precision. Featuring Alpine’s revolutionary OPTIM™Sync technology and an integrated 400W RMS Class-D amplifier, this compact powered subwoofer is engineered to compete with larger traditional subwoofer enclosures. Whether paired with a factory head unit or a complete aftermarket audio system, the PWV-SB10 delivers exceptional low-frequency performance with effortless integration. Key Features 10" BassRev™ Slim-Line Powered Subwoofer designed for powerful and accurate bass reproduction. Integrated 400W RMS Class-D Amplifier with built-in DSP processing for maximum efficiency and performance. Exclusive OPTIM™Sync Technology dynamically optimises bass output and tonal balance. Compact Shallow Enclosure Design for flexible installation in cars, SUVs, utes and 4WDs. Sealed Enclosure Construction enhances low-end punch, impact and musical accuracy. Premium Carpeted MDF Enclosure with reinforced double-brace structure for superior rigidity. Extended Protective Grille protects the woofer from cargo movement and accidental damage. High-Level and RCA Inputs for compatibility with factory and aftermarket audio systems. Variable Low-Pass Filter, Gain Control and Phase Adjustment for precise tuning. Dual 4-Ohm Voice Coil Design engineered for efficient power handling and performance. Revolutionary OPTIM™Sync Technology Alpine’s proprietary OPTIM™Sync algorithm is specifically engineered to maximise the performance of BassRev audio components. Integrated directly into the PWV-SB10’s DSP amplifier, OPTIM™Sync intelligently applies dynamic bass enhancement and pre-EQ optimisation to safely extend low-frequency output while maintaining tonal accuracy and control. The result is richer, deeper bass with greater impact and musical detail than conventional powered subwoofers, creating an immersive listening experience across all genres of music. Integrated High-Power Class-D Amplifier The built-in 400W RMS amplifier delivers efficient, high-output power while maintaining compact dimensions and low heat generation. Advanced onboard tuning controls make it easy to optimise bass performance to suit your vehicle and listening preferences. 400W RMS Continuous Power 800W Peak Power Handling Variable Low-Pass Filter Phase Control (0° / 180°) Adjustable Gain Control Select-able Turn-On Modes High-Level Speaker Inputs Low-Level RCA Inputs Premium MDF Enclosure Construction Built for long-term durability and consistent performance, the PWV-SB10 features a carpeted MDF enclosure reinforced with a double-brace internal structure. This premium construction minimises vibration and unwanted resonance, allowing the subwoofer to deliver clean, accurate bass even at higher volume levels. An extended protective grille safeguards the woofer from everyday impacts while maintaining a clean and professional installation appearance. Groundbreaking X-Max Excursion Design The BassRev 10" subwoofer incorporates an ultra-wide rubber surround engineered for maximum linear cone excursion and increased sound pressure levels. This advanced design allows the woofer to move more air while maintaining excellent control, resulting in powerful bass output with outstanding clarity and precision. Factory & Aftermarket Audio Integration The Alpine PWV-SB10 is designed to integrate seamlessly into both factory and aftermarket audio systems. High-level speaker inputs allow direct connection to factory-installed head units, while RCA inputs provide straightforward integration with aftermarket amplifiers and processors. The slim enclosure profile allows convenient installation behind seats, in cargo areas, or other space-limited locations while preserving valuable interior room. Technical Specifications Model Alpine PWV-SB10 Subwoofer Size 10 Inch (25.4 cm) Amplifier Type Integrated Class-D Amplifier with DSP RMS Power Handling 400W RMS Peak Power Handling 800W Peak Nominal Impedance 2 Ohms (Dual 4 Ohm Voice Coils) Frequency Response 31Hz – 200Hz Phase Control 0° / 180° Low-Pass Filter 50Hz – 200Hz Variable (-24 dB/Octave) Input Sensitivity High-Level: 0.5V – 10VRCA: 0.2V – 2.0V Enclosure Type Sealed Carpeted MDF Enclosure Dimensions 47.0 cm (W) x 28.3 cm (H) x 12.7 cm (D) Weight 9.7 kg What's Included 1 x Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer Integrated 400W RMS DSP Amplifier Power Connection Plug Adaptor Installation Hardware User Documentation Why Choose the Alpine PWV-SB10? Revolutionary OPTIM™Sync DSP bass optimisation technology Powerful 400W RMS integrated amplifier Compact slim-line enclosure ideal for limited installation space Deep, punchy bass that rivals larger enclosure designs Premium MDF cabinet with reinforced double-brace construction Compatible with factory and aftermarket audio systems Legendary Alpine sound quality, engineering and reliability Upgrade your vehicle audio system with the Alpine PWV-SB10 BassRev Powered Subwoofer and enjoy powerful low-frequency performance, exceptional clarity and immersive sound quality wherever your journey takes you.

Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer with 400W RMS Amplifier & OPTIM™Sync DSP Transform your driving experience with the Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer. Engineered with Alpine’s decades of acoustic expertise, this powerful subwoofer combines advanced DSP technology, premium construction, and high-output bass performance in a compact enclosure designed to fit a wide range of vehicles. Featuring Alpine’s revolutionary OPTIM™Sync technology and an integrated 400W RMS Class-D amplifier, the PWV-SB12 delivers deep, controlled bass response while maintaining exceptional clarity and musical accuracy. Designed to compete with larger full-size subwoofer enclosures, the PWV-SB12 produces impactful low-frequency performance without sacrificing valuable cargo space. Whether you're upgrading a factory audio system or enhancing an aftermarket setup, this powered subwoofer delivers the powerful bass your music deserves. Key Features 12" BassRev™ Slim-Line Powered Subwoofer engineered for powerful low-frequency performance. Integrated 400W RMS Class-D Amplifier with DSP processing for efficient, high-output sound. Exclusive OPTIM™Sync Technology dynamically optimises bass performance and tonal balance. Compact Shallow Enclosure Design allows flexible installation in a variety of vehicle applications. Sealed Enclosure Construction enhances bass punch, impact, and low-frequency accuracy. Premium Carpeted MDF Enclosure with double-brace structure for maximum rigidity and reduced resonance. Extended Protective Grille safeguards the woofer from cargo, pets, and daily wear. High-Level and RCA Inputs for easy integration with factory and aftermarket audio systems. Variable Low-Pass Filter, Gain Control, and Phase Adjustment for precise system tuning. Dual 4-Ohm Voice Coil Design for optimised performance and efficiency. Revolutionary OPTIM™Sync Technology At the heart of the BassRev Series is Alpine’s proprietary OPTIM™Sync bass optimisation algorithm. Preloaded into the integrated DSP amplifier, OPTIM™Sync intelligently applies dynamic bass enhancement and pre-EQ tuning specifically engineered for the PWV-SB12. This advanced processing safely extends low-frequency output, smooths frequency response, and maximises overall performance without sacrificing sound quality. The result is deeper, fuller bass that remains controlled, accurate, and musical at all listening levels. Integrated High-Power DSP Amplifier The built-in 400W RMS Class-D amplifier provides efficient power delivery while maintaining compact dimensions and low heat output. Advanced onboard controls allow seamless system integration and custom tuning for optimal sound performance. 400W RMS Power Output 800W Peak Power Handling Variable Low-Pass Filter Phase Control (0° / 180°) Gain Adjustment Selectable Turn-On Modes High-Level Speaker Inputs Low-Level RCA Inputs Premium MDF Enclosure Construction Built to withstand daily driving conditions, the PWV-SB12 features a robust carpeted MDF enclosure reinforced with a double-brace internal structure. This premium construction minimises unwanted vibrations and enclosure resonance, allowing the subwoofer to deliver clean, accurate bass even at high volume levels. An extended metal grille protects the woofer from accidental impacts while maintaining a clean, factory-style appearance. Groundbreaking X-Max Excursion Design The BassRev 12" subwoofer utilises a durable ultra-wide rubber surround that supports increased cone excursion and higher sound pressure levels. This advanced design allows the woofer to move more air while maintaining excellent control, resulting in deeper bass extension, improved impact, and exceptional clarity. Easy Integration with Factory & Aftermarket Systems The Alpine PWV-SB12 is designed for effortless integration with virtually any vehicle audio system. High-level speaker inputs allow installation in factory-equipped systems without requiring aftermarket head units, while RCA inputs provide simple connectivity to aftermarket processors and amplifiers. Its slim enclosure design allows flexible mounting options while preserving cargo space and maintaining a clean, professional installation. Technical Specifications Model Alpine PWV-SB12 Subwoofer Size 12 Inch (30.48 cm) Amplifier Type Integrated Class-D Amplifier with DSP RMS Power Handling 400W RMS Peak Power Handling 800W Peak Impedance 2 Ohms (Dual 4 Ohm Voice Coils) Frequency Response 31Hz – 200Hz Phase Control 0° / 180° Low-Pass Filter 50Hz – 200Hz Variable (-24 dB/Octave) Input Sensitivity High-Level: 0.5V – 10VRCA: 0.2V – 2.0V Enclosure Type Sealed MDF Enclosure Dimensions 53.3 cm (W) x 34.3 cm (H) x 16.8 cm (D) Weight 14.5 kg What's Included 1 x Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer Integrated 400W RMS DSP Amplifier Power Connection Plug Adaptor Installation Hardware User Documentation Why Choose the Alpine PWV-SB12? Advanced OPTIM™Sync DSP bass optimisation technology Powerful 400W RMS integrated amplifier Deep, punchy bass from a compact slim-line enclosure Premium MDF cabinet with reinforced construction Factory and aftermarket system compatibility Flexible installation for cars, SUVs, utes, and 4WDs Legendary Alpine sound quality and reliability Upgrade your vehicle's audio performance with the Alpine PWV-SB12 BassRev Powered Subwoofer and experience deeper bass, greater impact, and premium sound quality wherever the road takes you.

Unlock the full potential of your vehicle with the TORQIT ModuleMap — a powerful remote ECU tuning solution designed to safely increase performance, power, and torque without the need for a dyno. Remote ECU tuning – Optimise your vehicle straight from your driveway using a laptop with USB connection 3 selectable drive modes – Switch between Cruise, Sport, and Standard to suit your driving needs Cruise mode – Improved efficiency and torque, perfect for towing caravans, boats, or trailers Sport mode – Maximum performance output for increased power and responsiveness Standard mode – Revert back to factory settings anytime Custom calibration – Tailored to your vehicle and aftermarket mods like exhaust, snorkel, tyres and more Dyno-tested performance – Developed through extensive in-house dyno and road testing Safe and reliable – Maintains OEM safety parameters without pushing your engine beyond limits Noticeable gains – Enhanced throttle response, increased torque, and improved drivability How It Works TORQIT’s ModuleMap uses pre-developed dyno-tested data to remotely tune your vehicle. Each tune is built from a proven performance baseline, ensuring accurate and reliable results without requiring a physical dyno session. What to Expect Increased power and torque Better towing performance Improved overall driving experience Flexible tuning at your control Part Number VISMMP15

TORQIT ModuleMap 14 – Remote ECU Tuning Solution Part Number: VISMMP14 TORQIT’s ModuleMap is an ultra-fast and powerful ECU programming solution designed to remotely calibrate and optimise your vehicle’s factory settings. Built from extensive dyno-tested data, ModuleMap enhances your vehicle’s performance while maintaining OEM safety and reliability. Key Features Remote ECU tuning – no workshop visit required Noticeable increase in power and torque Improved performance for towing caravans, boats, and trailers Maintains factory safety limits and reliability Customised tuning based on your vehicle’s modifications 3 Driving Modes Cruise Mode: Optimised for everyday driving and towing heavy loads Sport Mode: Maximum performance for enhanced power and torque Standard Mode: Reverts your vehicle back to factory settings How It Works ModuleMap allows you to remap your vehicle directly from your driveway using a simple plug-and-play setup. Your vehicle is remotely tuned by experienced software technicians with over 40 years of combined industry experience. Dyno-Tested Performance All TORQIT tunes are developed and stress-tested on a dynamometer (dyno), simulating real driving conditions. Each vehicle platform undergoes approximately 20 hours of R&D, including testing with aftermarket modifications such as exhaust systems, snorkels, and turbos. This ensures every tune is precise, reliable, and tailored to your vehicle. Customised for Your Vehicle ModuleMap adapts to your specific setup, including modifications like exhaust systems, tyres, and snorkels. It also allows control over when peak power is delivered, ensuring optimal performance across different driving conditions. Safe & Reliable TORQIT tuning solutions are engineered to stay within your vehicle’s safe operating limits. You can expect increased performance without compromising reliability or longevity.

TORQIT Performance Exhaust Manifold – SUZUKI JIMNY 2018+ Designed specifically for SUZUKI JIMNY models (XL 5-Door, GLX & Lite 3-Door), TORQIT’s Performance Exhaust Manifold replaces the restrictive factory unit to deliver improved exhaust flow, increased power, and enhanced engine efficiency. Developed over 5 years, this high-performance manifold is engineered to reduce back pressure and improve overall engine performance—perfect for drivers looking to maximise power or reduce engine strain when towing or under load. Key Benefits Increased exhaust flow for improved power and torque Reduced engine strain under load or towing conditions Enhanced exhaust note and efficiency Direct replacement for factory manifold Premium Construction Manufactured in Australia, TORQIT Performance Headers are mandrel bent from premium-grade steel. Unlike restrictive cast iron factory manifolds, the smooth and consistent pipe diameter ensures unrestricted airflow and improved performance. Mandrel bent steel for maximum flow and precision fitment Consistent pipe diameter reduces back pressure High-quality construction for long-term durability Turbo X Ceramic Coating Each manifold is coated with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves longevity and performance Installation & Compatibility Bolt-on installation Compatible with SUZUKI JIMNY 2018+ (XL, GLX, Lite) Recommended Upgrade For maximum performance gains and a deeper, more aggressive exhaust note, pair this manifold with a TORQIT Cat-Back Exhaust System. Warranty & Origin 3-year product warranty Proudly made in Australia

TORQIT Performance Exhaust Headers – CHEVROLET SILVERADO 2020+ Part Number: TPH03 Upgrade your CHEVROLET SILVERADO with TORQIT’s Performance Exhaust Headers, designed to replace the restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide a noticeable improvement in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Silverado headers feature a long tube design, where the pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports better fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance gains, pair these headers with a TORQIT Silverado Performance Exhaust System. Designed with a single 3.5" pipe into twin 3" tailpipes, it delivers a powerful V8 note without cabin drone. Warranty & Origin Made in Australia Engineered for long-term performance and reliability

TORQIT Performance Exhaust Headers – DODGE RAM DT 5.7L (2019+) Part Number: TPH02 Upgrade your DODGE RAM DT with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT RAM headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with a TORQIT Performance Exhaust System to eliminate restriction and achieve optimal power, torque, and sound. Installation Professional installation recommended Bolt-on fitment compatible with factory components Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: DODGE RAM DT 5.7L Year: 2019+

TORQIT Performance Exhaust Headers – NISSAN PATROL Y62 5.6L (2013+) Part Number: TPH01 Upgrade your NISSAN PATROL Y62 with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Y62 headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with TORQIT Y62 Patrol Performance Exhaust and High Flow Catalytic Converters to eliminate restriction and achieve optimal power, torque, and sound. Installation Estimated installation time: 5–6 hours Professional installation recommended (requires hoist and mechanical expertise) Bolt-on fitment compatible with factory components Important Notes Installing headers on the Y62 Patrol removes primary catalytic converters and may trigger O2 sensor warning lights. An ECU tune such as TORQIT ModuleMap is recommended to prevent this. Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: NISSAN PATROL Y62 5.6L Series: Series 1–5 (2013+) Weight: 11 kg

TORQIT Stainless Steel Snorkel – TOYOTA LANDCRUISER 300 SERIES Part Number: SN12SS TORQIT’s Stainless Steel Snorkel is a fully sealed, one-piece construction designed to maximise airflow and protect your engine in harsh conditions. Australian-designed and rigorously tested, it is built to handle demanding off-road environments. By elevating your vehicle’s air intake, the snorkel improves air quality entering the engine, resulting in better performance, efficiency, and potential fuel savings. It also acts as essential protection when driving through dust or water crossings, reducing engine wear and extending vehicle lifespan. Key Benefits Improved engine performance and airflow Protection against dust and water ingestion Reduced engine wear and maintenance Enhanced fuel efficiency and longevity Premium Stainless Steel Construction Manufactured from 304 grade stainless steel, each snorkel is mandrel bent from a single piece to ensure a fully sealed unit with no joins. The smooth internal diameter maximises airflow, while the streamlined external design reduces snagging when off-road. Mandrel bent one-piece construction Fully sealed design for maximum protection High structural rigidity for extreme conditions Corrosion-resistant and temperature stable Designed for Australian Conditions Tested in harsh environments, TORQIT snorkels maintain strength in extreme temperatures without warping or corroding. The durable construction ensures long-term reliability for serious off-road use. Features Heavy-duty stainless steel with strong mounting brackets Choice of brushed stainless or satin black powder coat finish DIY installation with vehicle-specific fitting template Includes rust-proof paint for guard cut and rubber pinch weld Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Compatible with factory or TORQIT stainless steel airbox Works with most roof racks and light bars Warranty 5-year product warranty Does not void factory vehicle warranty Why Upgrade? Upgrading to a TORQIT Stainless Steel Snorkel enhances airflow, improves engine efficiency, and adds a durable, premium look to your vehicle—making it an essential upgrade for off-road and touring setups.

3" Turbo Back Twin Performance Exhaust for Next-Gen V6 Ford Ranger Raptor (2023 Onwards) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. Upgrade your 2023+ Ford Ranger Raptor V6 with Torqit's premium 3" Turbo Back Twin Performance Exhaust System. Designed to deliver a deeper, tougher exhaust note while maintaining factory bi-modal functionality, this system is engineered using premium 304-grade stainless steel for exceptional durability, corrosion resistance, and long-lasting performance both on and off-road. Built with thick-walled stainless steel, precision mandrel bends, an X-pipe, and high-flow Euro 6 catalytic converters, this exhaust maximises airflow while producing a refined performance sound throughout the entire rev range. Designed for straightforward DIY installation, it bolts directly into place without requiring a hoist. Features & Benefits Designed for Next-Gen Ford Ranger Raptor V6 (2023 onwards) 3" Turbo Back Twin Performance Exhaust System Retains factory bi-modal exhaust functions Premium 304-grade stainless steel construction for maximum strength and corrosion resistance Brushed stainless steel tubing up to 2mm thick X-pipe design improves exhaust flow and enhances exhaust note High-flow Euro 6 200 CPSI catalytic converters Fully mandrel bent piping for optimum exhaust flow and precise fitment Internal and external TIG welded flanges for superior strength and leak prevention Heavy-duty brackets with 10mm laser-cut flanges Single centre muffler delivers a deeper exhaust note throughout the rev range Choice of Black or Brushed Stainless Steel exhaust tips Maintains stock ground clearance Compatible with spare tyres up to 35" DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems (unless otherwise stated for the vehicle) Installation The Torqit Next-Gen Ranger Raptor Exhaust is designed as a bolt-together DIY system for straightforward installation. Approximate installation time: 1.5 hours No hoist required Complete fitment kit included Installation instructions included Premium Stainless Steel Construction Your exhaust system is exposed to constant heat, vibration, and harsh off-road conditions. Torqit uses brushed stainless steel tubing up to 2mm thick to maintain structural integrity after bending while providing outstanding durability and resistance to cracking. The thicker material also produces a deeper exhaust note with reduced cabin drone compared to thinner exhaust systems. 304 Grade Stainless Steel Manufactured from premium 304-grade stainless steel, this exhaust offers excellent strength, corrosion resistance, and easy maintenance. Its higher chromium and nickel content provides superior durability in demanding environments, making it ideal for vehicles regularly exposed to water crossings, coastal conditions, and extreme temperatures. Unlike lower-grade stainless steels that develop surface rust over time, 304-grade stainless steel only develops light browning from heat exposure and can be polished back to its original finish. Precision TIG Welding Every system features internal and external TIG welded flanges to maximise strength, minimise structural fatigue, prevent cracking, and eliminate exhaust gas leaks. This premium welding process produces clean, accurate welds that enhance both durability and long-term reliability. Mandrel Bent Performance Each exhaust is fully mandrel bent to maintain consistent internal pipe diameter throughout every bend. This ensures smoother exhaust flow, reduced back pressure, consistent pipe strength, and accurate vehicle fitment. Key Features Factory bi-modal exhaust functionality 3" Turbo Back Twin exhaust system Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system X-pipe for improved airflow and sound High-flow Euro 6 200 CPSI catalytic converters Single centre muffler Choice of Black or Brushed Stainless Steel tailpipe finishes Internal and external welded flanges 10mm laser-cut flanges Heavy-duty mounting brackets Maintains stock ground clearance Fits spare tyres up to 35" DIY bolt-together installation Approximate 1.5-hour installation Complete fitment kit included Up to 10-year warranty on stainless steel diesel exhaust systems (unless otherwise stated) Manufacturing Information This is a manufactured item. While key components may be kept in stock, final assembly and coating are completed to order and may require additional time before dispatch.

3" TO 4" PERFORMANCE EXHAUST WITH 650MM EXTENSION FOR TOYOTA LANDCRUISER 200 SERIES (WITH DPF) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or driving off-road. Offer available while stocks last. Enhance the performance and efficiency of your Toyota LandCruiser 200 Series with TORQIT's premium 3" to 4" Performance Exhaust featuring a 650mm extension section. Specifically designed for vehicles equipped with a Diesel Particulate Filter (DPF), this premium exhaust system improves airflow, lowers exhaust gas temperatures (EGTs), and delivers a deeper exhaust note while maintaining excellent drivability. Manufactured from premium stainless steel, this heavy-duty exhaust system is built to withstand Australia's demanding touring, towing and off-road conditions. The larger diameter design allows exhaust gases to flow more efficiently, helping your engine perform at its best whether towing a caravan, tackling challenging terrain or covering long distances. KEY FEATURES 3" to 4" performance exhaust system 650mm extension section included Designed for Toyota LandCruiser 200 Series models fitted with a DPF Improves exhaust flow and engine efficiency Helps reduce exhaust gas temperatures (EGTs) Premium stainless steel construction Corrosion-resistant finish for long-term durability Heavy-duty design for towing, touring and off-road use Bolt-on installation for straightforward fitment Engineered for reliable long-term performance PERFORMANCE BENEFITS Improved exhaust flow Enhanced engine responsiveness Reduced exhaust gas temperatures (EGTs) Improved towing performance Deep, refined exhaust note Built for demanding Australian conditions VEHICLE COMPATIBILITY Toyota LandCruiser 200 Series Vehicles equipped with a Diesel Particulate Filter (DPF) INSTALLATION This exhaust system features a bolt-on design for simplified installation. Professional fitting is recommended to ensure correct alignment and optimum performance. IMPORTANT INFORMATION Please confirm vehicle compatibility before ordering, particularly if your vehicle has aftermarket accessories or modifications. Contact our team if you require assistance selecting the correct exhaust system for your LandCruiser.

TORQIT DPF Back 3" Twin to 4" Single Performance Exhaust for Toyota LandCruiser 200 Series with ARB Frontier Tank Upgrade your Toyota LandCruiser 200 Series with the TORQIT HS8138XMSS-4 DPF Back Performance Exhaust, specifically engineered for 4.5L diesel models (10/2015–2022) fitted with an ARB Frontier Long Range Fuel Tank. Designed and manufactured in Australia, this premium exhaust system improves exhaust flow, enhances towing performance and delivers a deep, refined exhaust note while remaining compatible with factory Diesel Particulate Filter (DPF) systems. Featuring a 3" twin into 4" single DPF-back configuration, this performance exhaust is manufactured from premium 304-grade stainless steel with fully mandrel-bent tubing for unrestricted exhaust flow. The system comes standard with a high-flow resonator, providing a balanced exhaust note with improved sound compared to the factory system while maintaining everyday driving comfort. Engineered for Performance TORQIT Performance Exhausts are designed to maximise exhaust flow, reduce back pressure and improve overall engine efficiency. By allowing the engine to breathe more effectively, the system supports improved throttle response, towing performance and lower Exhaust Gas Temperatures (EGTs), making it ideal for touring, towing and demanding off-road conditions. Specifically designed to suit vehicles fitted with an ARB Frontier Tank, this exhaust provides reliable fitment without compromising durability or performance. Premium Construction Premium 304-grade stainless steel construction Fully mandrel bent tubing for unrestricted exhaust flow Heavy-duty laser-cut stainless steel flanges Internal and external TIG welded joins Heavy-duty mounting brackets High-flow resonator for improved sound quality Designed specifically for DPF-equipped vehicles Built to suit ARB Frontier Long Range Fuel Tank installations Performance Benefits Improved exhaust flow and engine efficiency Reduced exhaust gas temperatures (EGTs) Enhanced towing capability Improved throttle response Deep, refined exhaust note Excellent corrosion resistance Designed for Australian touring and off-road conditions Bolt-Together Installation The HS8138XMSS-4 is supplied as a complete bolt-together exhaust system for straightforward installation. It can be fitted by experienced DIY installers using basic workshop tools or professionally installed by an authorised TORQIT dealer. Installation time typically ranges from 1–3 hours depending on vehicle setup and workshop equipment. Vehicle Compatibility Toyota LandCruiser 200 Series 4.5L V8 Turbo Diesel October 2015 – 2022 DPF-equipped models Suits vehicles fitted with an ARB Frontier Long Range Fuel Tank Key Features DPF Back 3" Twin to 4" Single Performance Exhaust High-flow resonator included Premium 304-grade stainless steel Mandrel bent construction Laser-cut TIG welded flanges Heavy-duty brackets Bolt-together installation Australian designed and manufactured Built for towing, touring and off-road performance Important Information This exhaust system is specifically designed to suit Toyota LandCruiser 200 Series vehicles fitted with an ARB Frontier Long Range Fuel Tank. Please confirm vehicle compatibility before ordering, particularly if your vehicle has additional aftermarket accessories or modifications. This is a manufactured product. While key components may be held in stock, final assembly is completed to order and may require additional processing time before dispatch. SKU: HS8138XMSS-4 Material: Premium 304 Grade Stainless Steel Configuration: DPF Back – Twin 3" to Single 4" Finish: Brushed Stainless Steel Weight: 32kg

This TORQIT Performance Exhaust system has been specifically engineered for the Toyota LandCruiser 200 Series 4.5L Diesel fitted with a Diesel Particulate Filter (DPF). Designed and manufactured in Australia, it delivers improved exhaust flow, enhanced engine efficiency and a deep, refined exhaust note while maintaining compatibility with DPF-equipped vehicles. The system features a premium 3" to 4" exhaust configuration with a high-flow muffler, helping optimise exhaust gas flow while minimising cabin drone. Manufactured from premium 304-grade stainless steel with fully mandrel-bent tubing and precision TIG welding, it delivers exceptional strength, corrosion resistance and long-term durability for touring, towing and off-road driving. Engineered for demanding Australian conditions, the exhaust incorporates double braided flex bellows to absorb engine and chassis movement, along with heavy-duty laser-cut flanges for a secure, leak-resistant fit. The high-flow design supports improved engine breathing while maintaining reliable performance and long service life. Specifications Material: Stainless Steel Thickness: 2mm Steel Grade: Premium 304 Grade Stainless Steel Surface Finish: Titanium-Coated

Take your Toyota LandCruiser 200 Series to the next level with the TORQIT Twin Exit Turbo Back Exhaust – Louder Option. Featuring dual left and right rear outlets, this performance exhaust is engineered to maximise exhaust flow while delivering a deeper, more aggressive exhaust note and improved engine performance for touring, towing and off-road adventures. Manufactured from premium 304-grade stainless steel, this heavy-duty twin exit system features fully mandrel-bent tubing, precision TIG welding and robust construction for outstanding durability. The louder option incorporates an X-Pipe style configuration, producing a stronger exhaust note while reducing back pressure and enhancing overall engine efficiency. Key Features Twin 3" turbo back exhaust system Dual left and right rear outlet configuration Louder Option (X-Pipe configuration) Premium 304-grade stainless steel construction Fully mandrel bent for unrestricted exhaust flow Improves power, torque and throttle response TIG welded with internally and externally welded flanges Heavy-duty wrap-around brackets Double braided stainless steel flex bellows Titanium-coated dump pipes for improved heat dispersion High-flow diesel catalytic converter Bolt-together installation Backed by TORQIT's stainless steel exhaust warranty Performance Benefits Reduced back pressure Improved engine efficiency Enhanced towing performance Distinctive dual rear outlet styling Powerful V8-inspired exhaust note SKU: HS8133XMSS TW

Upgrade your Toyota LandCruiser 200 Series with the TORQIT Twin 3" to Single 4" Turbo Back Exhaust – Louder Option. Designed to improve exhaust flow, throttle response and overall engine performance, this premium exhaust system delivers a deeper, more aggressive exhaust note while supporting towing, touring and off-road driving. Manufactured from premium 304-grade stainless steel, this heavy-duty turbo back exhaust features fully mandrel-bent tubing, precision TIG welding and durable construction for long-lasting reliability in Australia's toughest conditions. The louder option replaces the standard resonator with an X-Pipe style configuration, creating a more pronounced exhaust note while reducing back pressure and improving engine efficiency. Key Features Twin 3" to Single 4" turbo back exhaust system Louder Option (X-Pipe configuration) Premium 304-grade stainless steel construction Fully mandrel bent for unrestricted exhaust flow Improves power, torque and throttle response TIG welded with internally and externally welded flanges Heavy-duty wrap-around brackets Double braided stainless steel flex bellows Titanium-coated dump pipes for improved heat dispersion High-flow diesel catalytic converter Bolt-together installation Backed by TORQIT's stainless steel exhaust warranty Performance Benefits Reduced back pressure Improved engine efficiency Enhanced towing performance More aggressive exhaust note Excellent corrosion resistance SKU: HS8133XMSS

Performance Gain: 26KW / 94NM For a vehicle that excels at cross-country touring, towing and everyday driving, the Toyota 200 Series LandCruiser is hard to beat. Torqit's Twin 3" into Single 4" Performance Exhaust has been engineered to complement the capability of the 4.5L LandCruiser by delivering the ideal combination of performance, durability and a deep V8 exhaust note. Manufactured from premium 304-grade brushed stainless steel and constructed with tubing up to 2mm thick, this fully mandrel-bent exhaust system is designed to maximise exhaust flow, improve engine efficiency and deliver long-lasting reliability. Heavy-duty three-bolt laser-cut flanges are TIG welded internally and externally for exceptional strength, while the thick stainless steel construction resists cracking during demanding off-road use. The system comes standard with a stainless steel resonator, with an optional X-Pipe available for those wanting a louder, deeper exhaust note. The X-Pipe balances exhaust pulses, reduces back pressure and improves overall engine efficiency. Starting from the turbo, the system incorporates high-flow diesel catalytic converters, double braided stainless steel flex bellows and titanium-coated dump pipes. Together these components improve exhaust gas flow, reduce engine bay temperatures and minimise stress caused by engine movement, making the system ideal for touring, towing and heavy-duty off-road applications. Combine this exhaust with other TORQIT performance upgrades to further improve the performance, efficiency and drivability of your Toyota LandCruiser. Performance Exhaust Features Thick Stainless Steel Construction Built using stainless steel up to 2mm thick, the system is designed to withstand harsh Australian conditions while maintaining structural strength after mandrel bending. The thicker material also produces a deeper exhaust note with minimal cabin drone. Premium 304 Grade Stainless Steel Manufactured from premium 304-grade stainless steel, the exhaust provides outstanding corrosion resistance, high-temperature durability and long service life. It is particularly well suited to off-road driving, water crossings and coastal environments where rust resistance is essential. Internal & External TIG Welds All flanges are TIG welded internally and externally to maximise structural strength, reduce fatigue and prevent exhaust gas leaks. Precision welding ensures a clean finish and superior durability compared to conventional MIG welded systems. Mandrel Bent System Fully mandrel bent tubing maintains a consistent internal diameter throughout the system, allowing unrestricted exhaust flow while reducing back pressure. This supports improved engine performance, efficiency and accurate vehicle fitment. Titanium Coated Dump Pipes TORQIT's titanium-coated dump pipes are engineered to withstand extreme temperatures while helping disperse heat away from the engine bay. The durable titanium finish resists corrosion and maintains long-term performance even in demanding environments. High Flow Diesel Catalytic Converter The high-flow diesel catalytic converter increases exhaust gas flow while remaining emissions compliant. Its lower cell density compared to standard catalytic converters improves power delivery, fuel efficiency and helps reduce Exhaust Gas Temperatures (EGTs). Double Braided Flex Bellows Double braided stainless steel flex bellows absorb engine movement and chassis vibration, reducing stress on the exhaust system and helping prevent cracking over time. They also simplify installation by allowing minor alignment adjustments during fitment. Installation This Twin 3" into Single 4" Turbo Back Exhaust is supplied as a DIY bolt-together system with a complete fitting kit. Installation typically requires only basic hand tools and can generally be completed in approximately two hours without the need for a vehicle hoist. Features Brushed stainless steel tubing up to 2mm thick Premium 304-grade stainless steel construction Fully mandrel bent system Internal and external TIG welded flanges Heavy-duty three-bolt laser-cut flanges Heavy-duty wrap-around brackets Stainless steel resonator/muffler Double braided stainless steel flex bellows Titanium-coated dump pipes for improved heat dispersion High-flow diesel catalytic converter Deep exhaust note with minimal cabin drone DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems (unless otherwise stated) Important Information This exhaust system is designed to suit selected long-range fuel tanks, including LRA, Long Ranger 177L and Brown Davis Long Range Tank systems. If your vehicle is fitted with other aftermarket accessories or fuel tanks, please confirm compatibility before purchase. This is a manufactured item. While key components may be held in stock, final assembly and finishing are completed to order and may require additional processing time before dispatch. Weight: 35kg Make: Toyota Model: LandCruiser 200 Series

Designed specifically for Toyota LandCruiser 200 Series models fitted with a Frontier Long Range Fuel Tank, the TORQIT Twin 3" to Single 4" Turbo Back Exhaust provides improved exhaust flow, enhanced engine performance and a deep performance exhaust note while maintaining compatibility with your aftermarket fuel tank setup. Manufactured from premium 304-grade stainless steel, this heavy-duty exhaust system features fully mandrel-bent tubing, precision TIG welding and robust construction for exceptional durability in Australia's toughest touring, towing and off-road conditions. Engineered for reliable fitment with Frontier Tank installations, it delivers long-lasting performance without compromising ground clearance or durability. Key Features Twin 3" to Single 4" turbo back exhaust system Designed to suit Frontier Long Range Fuel Tank installations Premium 304-grade stainless steel construction Fully mandrel bent for unrestricted exhaust flow Improves power, torque and throttle response TIG welded with internally and externally welded flanges Heavy-duty wrap-around brackets Double braided stainless steel flex bellows Titanium-coated dump pipes for improved heat dispersion High-flow diesel catalytic converter Deep performance exhaust note without excessive cabin drone Bolt-together installation Backed by TORQIT's stainless steel exhaust warranty Performance Benefits Reduced back pressure Improved engine efficiency Enhanced towing performance Deep performance exhaust note Compatible with Frontier Long Range Fuel Tank installations SKU: HS8133SS-4