FRONT RUNNER Quick Release Awning Mount Kit - RRAC222
$162.00
$180.00
Once these brackets are installed on a Front Runner Rack, no additional tools are needed to remove or refit the awning.
Simply release the 2 latches and lift the awning away in seconds.
No more wrenching in tight spaces during the off-season or time-consuming weekday removal of the awning.
This strong and "rattle-free" mounting system is built off-road tough for use with Front Runner Racks.
Works with all Front Runner Awnings and other popular awning brands like Eezi-Awn, Oz Tent, etc.
2 low profile base brackets are bolted to a Front Runner Rack while 2 self-aligning bushes are secured to the awnings mounting channel using the supplied fasteners.
Safely secured in place using 2 latches with built-in safety catch. For added peace of mind, lock your latches in place using Rack Accessory Lock / Small.
The brackets are small, unobtrusive and can be left on the roof rack when the awning is not mounted.
No awning modification required.
Removed awnings can be stored using the wall mount brackets supplied.
Supplied with all required mounting hardware.
Fitting instructions are included.
Weight limit: 20kg (44.1lbs).
Note: Not suitable for 270 degree awnings.
Features
Consists of:
1 x Pair of Quick Release Awning Brackets
Installation Hardware
Fitting instructions
Materials used:
Black powder coated Steel
Product Dimensions: (Per Single Bracket)
161.5mm(6.4") L x 103mm (4.1") W x 100mm (3.9") H
Weight:
2kg (4.4lbs)
FRONT RUNNER Rack Adaptor Plates For Thule Slotted Load Bars...
$107.10
$119.00
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
Steel.
Black powder coated.
Mounts onto individual slats via the T-slot system.
T-slot bolts included.
Pre-cut fitment holes.
Features
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") high strength steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 290mm (11.42") x W 74mm (2.91") x H 27mm (1.06")
Weight:
2kg (4.4lbs)
FRONT RUNNER Rack Ladder - LADD017
$474.30
$527.00
A 6 (six) step ladder to easily access your gear.
Supplied in 2 pieces for easy storage.
Made from sturdy aluminum and anodized black to match the Front Runner Rack.
Foot-friendly steps.
To secure your Rack Ladder firmly in place, add the Rack Ladder Side Mount Bracket *sold separately.
Holds a maximum weight of 180kg/400lbs.
Features
Consists of:
1 x Rack Ladder
Fitting Instructions
Materials used:
Black powder coated aluminium
Product Dimensions:
In-Use Dimensions:
359mm (14.1") W x 50mm (2") D x 2200mm (86.6") H
Storage Dimensions:
359mm (14.1") W x 100mm (3.9") D x 1205mm (47.4") H
Weight:
5.33kg (11.8lbs)
FRONT RUNNER Rack Ladder Side Mount Bracket - RRAC269
$208.80
$232.00
A bracket set that attaches to the side profile of your Slimline II or Slimpro Van Roof Rack.
Adjustable to suit all vehicle types and load beds.
Mounts your Rack Ladder to these brackets to access the roof of your vehicle.
These brackets can be left on your rack without being obtrusive.
Made from high-grade steel and powder coated with the same durable all-weather epoxy powder coating as the Front Runner racks.
Features
Consists of:
1 x Pair of Ladder Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
182mm (7.2") L x 87mm (3.4") W x 397mm (15.6") H
Weight:
3kg(6.6lbs)
FRONT RUNNER Rack Mount Shower Cubicle - RRAC178
$339.30
$377.00
This Shower Cubicle secures to your Front Runner rack using two mounting brackets.
The stainless steel cubicle frame slides into the two mounting brackets.
Easily slide the 240gsm, UV protected shower curtain over the tubing frame to create a private enclosure.
Use guy ropes to secure the corners of the curtain in place.
Stores away neatly in the supplied carry bag.
Features
Consists of:
1 x Shower Curtain
4 x Ground Pegs
4 x Guy Ropes
1 x Storage Bag
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated 304 stainless steel
Black powder coated steel
240gsm Ripstop, UV and mold resistant fabric
Product Dimensions:
1004mm (39.5") L x 1065mm (41.9") W x 1700mm (66.9") H
Weight:
2.9kg (6.3lbs)
FRONT RUNNER Ram 1500 (2019-Current) Slimline Ii Roof Rack Kit...
$1,058.40
$1,176.00
Effortlessly increase your Ram 1500 Cab's gear-carrying capabilities with the 752mm/29.6" long Slimline II Roof Rack Kit. This off-road proven rack requires drilling to install. You now have the perfect platform to secure firewood, a Wolf Pack Pro, recovery tracks, or other equipment. Compatible with cab over campers.
This 752mm/29.6" long, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram 1500 Quad Cab. Also suitable for crew cab with over cab camper and 2500 / 3500 single cabs. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Suitable for:Full Size Slimline II for Ram 1500 Regular CabCab Over Camper Slimline II for RAM 1500 Quad CabCab Over Camper Slimline II for RAM 1500 Crew Cab
Note:Both traditional and panoramic sunroofs may be operated in 'vent mode' Only traditional sunroof can fully open, Panoramic can not fully open as it opens to the outside.Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current).Models with panoramic sunroofs include: Ram 1500 (2019-Current).
Features
KRDR023T - Ram 1500 Quad Cab (2019-Current) Slimline II Roof Rack Kit
Consisting of:
1x FADR005 - Ram 1500 Quad Cab(2019-Curr)Camper Rail
1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 17.08kg (37.65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 22kg (48lbs)
FRONT RUNNER Ram 1500 (5Th Gen) 4 Door Crew Cab...
$2,835.00
$3,150.00
Get ready to massively up the gear-carrying capacity in the load bed area of your Ram 1500 (5'7" box) with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ram. Attach a variety of Pro Bed accessories to the Pro Bed System, while all our 55+ other accessories can go on the rack - no excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the RAM 1500 (5Gen) 4 Door Crew Cab 5.7' load bed.
Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, (Wolf Pack Pro Cargo System Bracket, Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the RAM 1500 (5Gen) 4 Door Crew Cab with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net .
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBDR001T - RAM 1500 (5th Gen) 4 Door Crew Cab 5'7" Box (2019-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBDR001S - RAM 1500 (5th Gen) 4 Door Crew Cab 5'7" Box Pro Bed
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 78.46kg (172.97lbs)
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 760mm (30")
Shipping Weight:
Weight: 85kg (187lbs)
FRONT RUNNER Ram 1500 (5Th Gen) 4 Door Crew Cab...
$1,288.80
$1,432.00
This tough, lightweight steel and aluminum system secures to the bed of your Ram, thereby hugely increasing its gear-carrying capacity. This Pro Bed system is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. It allows you to pack all the overland, camping or sports gear you may need.
This Pro Bed System is specifically designed to fit the RAM 1500 (5Gen) 4 Door Crew Cab 5.7' load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the RAM 1500 (5Gen) 4 Door Crew Cab 5.7' with specific mounting brackets.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net.
Drilling is required for fitment.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBDR001S - RAM 1500 (5th Gen) 4 Door Crew Cab 5'7" Box (2019-Current) Pro Bed System
Consisting of:
1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large
1x PBDR001 - RAM 1500 (5th Gen) 4 Door Crew Cab 5'7" Box (2019-Current)
1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 53.13kg (117.13lbs)
Shipping Dimensions:
Width: 425mm (17")
Length: 1490mm (59")
Height: 615mm (24")
Shipping Weight:
Weight: 55kg (121lbs)
FRONT RUNNER Ram 1500 5.7' (2009-Current) Slimline Ii Load Bed...
$2,028.60
$2,254.00
This kit creates a full-size rack that sits above your RAM 1500 5.7' truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRDR016T - RAM 1500 5.7' (2009-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
1 x RRSTP08 - Slimline II Tray - 1575mm(W) X 1560mm(L) - by Front Runner
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
2 x TRBU002 - Pickup Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26.4kg (58.2lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 445mm (17.5")
Length 1730mm (68.1")
Height 285mm (11.2")
Shipping Weight:
Weight 31kg (68.3lbs)
FRONT RUNNER Ram 1500 5.7' (2009-Current) Slimline Ii Top-Mount Load...
$2,121.30
$2,357.00
This kit creates a full-size rack that sits above your RAM 1500 5.7' truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1358mm), 2 Tracks that install on top of the side channel of the load bed, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR017T - RAM 1500 5.7' (2009-Current) Slimline II Top-Mount Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS027 - Leg Spacer 6mm (Pair)3x LASS038 - Pickup Roll Top/Top Mount Leg / Medium (Pair)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.6608kg (78.62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 270mm (11")
Shipping Weight:
Weight: 36kg (79lbs)
FRONT RUNNER Ram 1500 5.7' Crew Cab (2009-Current) Double Load...
$691.20
$768.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 5.7' Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRDR016 - Ram 1500 5.7' Crew Cab (2009-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 11.4kg (25.2lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 300mm (12.0")
Length: 1665mm (66.0")
Height: 115mm (5.0")
Shipping Weight:
11.4kg (25.0lbs)
FRONT RUNNER Ram 1500 5.7' Crew Cab (2009-Current) Triple Load...
$935.10
$1,039.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRDR019 - Ram 1500 5.7' Crew Cab (2009 - Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 15.9kg (35.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 380mm (15.0")
Length: 1595mm (63.0")
Height: 130mm (5.0")
Shipping Weight:
15.6kg (34.0lbs)
FRONT RUNNER Ram 1500 6.4' (2009-Current) Slimline Ii Load Bed...
$2,307.60
$2,564.00
This kit creates a full-size rack that sits above your RAM 1500 6.4' truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRDR014T - RAM 1500 6.4' (2009-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 39.4kg (87.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18.0")
Length: 1730mm (68.0")
Height: 290mm (11.0")
Shipping Weight:
40.0kg (88.0lbs)
FRONT RUNNER Ram 1500 6.4' Crew Cab (2009-Current) Double Load...
$772.20
$858.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 6.4' Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRDR017 - Ram 1500 6.4' Crew Cab (2009-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner
1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 12.2kg (26.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 300mm (12.0")
Length: 1665mm (66.0")
Height: 115mm (5.0")
Shipping Weight:
12.2kg (27.0lbs)
FRONT RUNNER Ram 1500 6.4' Crew Cab (2009-Current) Triple Load...
$1,016.10
$1,129.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRDR020 - Ram 1500 6.4' Crew Cab (2009-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner
1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 16.6kg (36.7lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 390mm (15.0")
Length: 1630mm (64.0")
Height: 130mm (5.0")
Shipping Weight:
16.4kg (36.0lbs)
FRONT RUNNER Ram 1500 6.4' Quad Cab (2009-Current) Slimline Ii...
$2,307.60
$2,564.00
This kit creates a full-size rack that sits above your RAM 1500 6.4' Quad Cab's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRDR015T - RAM 1500 6.4' Quad Cab (2009-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 39.4kg (87.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 1730mm (68.0")
Length: 445mm (18.0")
Height: 290mm (11.0")
Shipping Weight:
40.0kg (88.0lbs)
FRONT RUNNER Ram 1500 6.4' Quad Cab (2009-Current) Triple Load...
$1,016.10
$1,129.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 Quad Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from high strength steel and aluminum, protected with a weather-resistant black powder coat.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRDR021 - Ram 1500 6.4' Quad Cab (2009-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner
1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 16.6kg (36.7lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 390mm (15.0")
Length: 1630mm (64.0")
Height: 130mm (5.0")
Shipping Weight:
16.4kg (36.0lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack 40In...
$217.80
$242.00
Improve the performance of the Slimsport Rack on your Ram 1500 with this useful Light Bar Ready Wind Fairing. It accommodates a Slim 40" LED Light Bar while massively reducing wind noise and fuel consumption allowing easy airflow over the rack and accessories. It's a great way to quieten your ride.
Lightbar wind fairing for RAM 1500 Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1370mm (53.9") L x 200mm (7.9") W x 177mm (7") H
Weight:
4kg (8.8lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack Wind...
$217.80
$242.00
Enhance the performance of the Slimsport Roof Rack on your Ram 1500 with this smart Rack Wind Fairing. It will massively reduce wind noise and fuel consumption while allowing easy airflow over your rack and accessories-a great way to quieten your ride.
A wind fairing for the RAM 1500 Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack Wind Fairing
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1371mm (54") L x 222mm (8.7") W x x 210mm (8.3") H
Weight:
4.4kg (9.7lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Roof Rack...
$1,068.30
$1,187.00
Get your Ram 1500 ready for serious gear-carrying duties with the Slimsport Roof Rack. The sleek, low-profile Slimsport Roof Rack is form-fit to complement the aesthetic of your RAM and is compatible with 55+ accessories so you can kit up for any adventure.
This low-profile flat deck Slimsport rack has a load carrying area of 1660mm (65.4") x 1380mm (54.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Drilling required for installation.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Features
KSDR002T - RAM 1500 Slimsport Roof Rack Kit
Consisting of:
1x KSDR001 - Dodge Ram 1500 Slimsport Tray
1x RRAC279 - RAM 1500 Slimsport Rack Wind Fairing
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1660mm (65.4") L x 1380mm (54.3") W x 152mm (6") H
Approximate Installed Weight: 30.55kg (67.35lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 34kg (75lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Roof Rack...
$1,068.30
$1,187.00
Turn your RAM 1500 into the ultimate gear carrier with this low-profile Slimsport Rack. Thanks to the many available accessories, you can easily customize the rack according to your camping, sports or overland needs. It comes with a light bar-ready wind fairing, for all those late-night expeditions.
This low-profile flat deck Slimsport rack has a load carrying area of 1665mm (65.6") x 1380mm (54.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included is the RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing with a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSDR003T - RAM 1500 Slimsport Roof Rack Kit / Lightbar ready
Consisting of:
1x KSDR001 - Dodge Ram 1500 Slimsport Tray
1x RRAC280 - RAM 1500 Slimsport Rack 40"Lightbr Wind Fairing
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1665mm (65.6") L x 1380mm (54.3") W x 140mm (5.5") H
Approximate Installed Weight: 30.11kg (66.38lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 33kg (73lbs)
FRONT RUNNER Ram 1500 Quad Cab (2019 - Current) Slimline...
$1,421.10
$1,579.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Quad Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRDR013T - Ram 1500 Quad Cab (2019 Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FADR004 - Ram 1500 Quad Cab(2019-Curr)Foot Rails/ Low
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.54kg (60.72lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 26.4kg (58lbs)
FRONT RUNNER Ram 1500 Quad Cab (2019-Current) Slimline Ii Roof...
$1,480.50
$1,645.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Quad Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contains 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRDR012T - Ram 1500 Quad Cab (2019-Current) Slimline II Roof Rack Kit by Front Runner
Consisting of:
1x FADR002 - Ram 1500 Quad Cab (2019-Current) Foot Rails
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 54.83kg (120.88lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Weight: 445mm (18")
Length: 1730mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 26.8kg (59lbs)
FRONT RUNNER Ram 1500/2500/3500 6' 4In (2009-Current) Slimline Ii Top-Mount...
$2,315.70
$2,573.00
This kit creates a full-size rack that sits above your RAM 1500/2500/3500 6' 4" truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks that install on top of the side channel of the load bed, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR018T - Ram 1500/2500/3500 6' 4" (2009-Current) Slimline II Top-Mount Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS027 - Leg Spacer 6mm (Pair)3x LASS038 - Pickup Roll Top/Top Mount Leg / Medium (Pair)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)1x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.4808kg (84.84lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 270mm (11")
Shipping Weight:
Weight: 39kg (86lbs)
FRONT RUNNER Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline Ii Roof...
$1,615.50
$1,795.00
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Crew Cab 2009+. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 openings to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note:
Both traditional and panoramic sunroofs may be operated in 'vent mode' and fully retracted, provided that you do NOT mount a table underneath. If you do mount a table underneath, only traditional sunroofs may be fully opened because they retract underneath the roof. Traditional sunroofs may NOT be operated in 'vent mode' because the table will interfere.
Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current)
Models with panoramic sunroofs include: Ram 1500 (2019-Current)
Features
KRDR010T - Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit by Front Runner
Consisting of:
1x FADR001 - Ram 1500 Crew Cab (2009-Current) Foot Rails1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.68kg (65.43lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")
Shipping Weight:
Weight: 31kg (68lbs)
FRONT RUNNER Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline Ii Roof...
$1,624.50
$1,805.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ram Crew Cab. Drilling into the vehicle's roof is required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note:
Traditional sunroofs may be fully opened because they retract underneath the roof. They may NOT be opened in vent mode, otherwise the Low Profile rack will interfere.
If you wish to open a traditional sunroof in vent mode you may install Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit, provided that you do NOT mount a table underneath.
Models with traditional sunroofs include: Ram 1500 (2009-2018), Ram 1500 Classic (2019-Current), Ram 2500/3500 (2019-Current)
Panoramic sunroofs may NOT be opened in any mode because they retract over the roof.
If you wish to open a panoramic sunroof in any mode you may install Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit, provided that you do NOT mount a table underneath.
Models with panoramic sunroofs include: Ram 1500 (2019-Current)
Features
KRDR011T - Ram 1500/2500/3500 Crew Cab (2009-Current) Slimline II Roof Rack Kit / Low Profile by Front Runner
Consisting of:
1x FADR003 - Ram 1500 Crew Cab(2009-Curr)Foot Rails/ Low
1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.7kg (65.48lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 28.4kg (62lbs)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr (2003-Current) Double Load Bar...
$573.30
$637.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500/2500/3500 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR025 - Ram 1500/2500/3500 ReTrax XR (2003-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK018 - Roof Load Bar Pair 1575mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 6.8kg (14.99lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 170mm (7")
Length: 1690mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 8kg (18lbs)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 5'7In (2009-Current) Slimline Ii...
$1,959.30
$2,177.00
This kit creates a full-size rack that sits above your Ram 1500/2500/3500s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR019T - Ram 1500/2500/3500 ReTrax XR 5'7" (2009-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.68kg (72.05lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 34kg (75lb)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 5'7In (2009-Current) Triple Load...
$865.80
$962.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR022 - Ram 1500/2500/3500 ReTrax XR (2009-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK019 - Roof Load Bar Set 1575mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 9kg (19.84lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1690mm (67")
Height: 150mm (6")
Shipping Weight:
Weight: 10kg (22lbs)
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 6'4In (2003-Current) Slimline Ii...
$2,216.70
$2,463.00
This kit creates a full-size rack that sits above your Ram 1500/2500/3500s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR020T - Ram 1500/2500/3500 ReTrax XR 6'4" (2003-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS027 - Leg Spacer 6mm (Pair)
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.79kg (78.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 37kg (81lbs)
FRONT RUNNER Dometic Hydration Water Jug 11L/2.9Gal Rack Bracket -...
$2,842.20
$3,158.00
Double up the loading space on your Ram 1500/2500/3500 with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ram 1500/2500/3500.
This kit creates a full-size rack that sits above your Ram 1500/2500/3500’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 2368mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x LASS027 - Leg Spacer 6mm (Pair)4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP12 - SLII Tray - 1575mm(W)X2368mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 44.65kg (98.44lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 46kg (101lbs)
FRONT RUNNER Ram Pro Master 3500 (136 Wb/High Roof) (2014-Current)...
$2,173.50
$2,415.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1345mm (53") W x 63mm (2.5") H Weight:4.38 kg (9.7 lbs)
FRONT RUNNER Ram Pro Master 3500 (159 Wb/Ext High Roof)...
$2,837.70
$3,153.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1358mm (53.5") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:4.5 kg (9.9 lbs)
FRONT RUNNER Ram W/ Rambox (2009-Current) Slimline Ii 5'7In Bed...
$1,561.50
$1,735.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1475mm (58.1") W x 63mm (2.5") H Weight:4.57 kg (10.1 lbs)
FRONT RUNNER Recovery Device And Gear Holding Side Brackets -...
$215.10
$239.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1345mm (53") W x 63mm (2.5") H
Weight:4.88 kg (10.8 lbs)
FRONT RUNNER Rivian R1S (2022-Current) Slimline Ii Roof Rack Kit...
$2,360.70
$2,623.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1475mm (58.1") W x 63mm (2.5") H
Weight:5.07 kg (11.2 lbs)
FRONT RUNNER Rivian R1T (2022-Current) Slimline Ii Load Bed Rack...
$1,993.50
$2,215.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (69.4") L x 1165mm (45.9") W x 63mm (2.5") H
Weight:4.92 kg (10.9 lbs)
FRONT RUNNER Rivian R1T (2022-Current) Slimline Ii Roof Rack Kit...
$1,708.20
$1,898.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (61.4") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:5.05 kg (11.1 lbs)
FRONT RUNNER Roof Top Tent Annex - TENT032
$447.30
$497.00
Store Pick-Up Only: This product is available for collection from our store only and is not available for shipping. Contact us on 1300 856 888 for more information or to confirm availability before placing your order.Product Description
Even adventurers need privacy sometimes and this annex provides a convenient private space for a shower, toilet, changing room, additional sleeping space, or even as walls for a kitchen set up.
Zippered fabric flaps on both the inside and outside of the screen windows give privacy and protection from the elements.
Entry into the Annex is via the right-hand side to avoid the ladder of the Roof Top Tent.
The zippered screen door also has a Velcro fabric cover for privacy and rain protection.
The back of the annex features a zippered door for easy entry into a vehicle door; perfect for accessing luggage while changing.
If your rooftop tent is positioned to overhang the back of your vehicle, the rear top-down zippered door allows access to your tailgate / load bed.
Walls can be secured to the ground using the supplied stakes.
Made of the same lightweight, breathable and waterproof tent fabric as the Roof Top Tent.
Stores compact in a matching cinch tie / drawstring bag.
Features a removable, zip-off waterproof flooring ideal when making an added sleeping room.
*Note: Product Desgin and Color may differ from product images.
Features
Consists of:
1 x Roof Top Tent Annex
1 x Zippered Floor
Overall Product Dimensions:
600mm (23.6") L x 175mm (6.9") W x 185mm (7.3") H
Opened Dimensions:
Base of the Roof Top Tent:
1219mm (48") L x 1295mm (51") W
Dimensions on the Ground:
Approx. 1524mm (60") L x 1600mm (63") W
Maximum Opened Length:
2286mm (90")
Weight:
3.77kg (8.3lbs)
FRONT RUNNER Roof Top Tent Cover / Tan - TENT035
$199.80
$222.00
A durable tent cover made from 1000D PVC protects your tent when not in use.
Features
Material used:
1000D PVC
Product Dimensions:
1255mm (49.4") L x 1355mm (53.3") W x 310mm (12.2") H
Weight:
3.08kg (8.4lbs)
Color:
Tan
FRONT RUNNER Rotopax Side And Top Mount Kit - RRAC112
$206.10
$229.00
Free up rack space and mount fuel and water to the side or top of a Slimline II Rack.
The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack.
The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96")) and tilt (12.5 degree increments up to 25 degrees) adjustable.
Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle.
Rotopax Rack Mounting Plate measures in at 480mm (18.9") L x 250mm (9.8") W x 20mm (0.8") H, weighs 1,58kg (3.5lbs).
Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack.
Installation hardware and fitting instructions included.
PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.
Features
Consists of:
1 x RotoPax Mounting Plate (RRAC105)
1 x Pair of RotoPax Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
97mm (3.8") L x 480mm (18.9") W x 243mm (9.6") H
Weight:
2.88kg (6.4lbs)
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1170Mm(L)...
$991.80
$1,102.00
Maximize your canopy's cargo capacity with the highly versatile Slimpro Canopy Rack Kit and the wide variety of available accessories for the load area. This smart Kit will ensure that you can easily switch between your work, sports, and adventure gear. There is no better way to carry cargo on your canopy.
Compatible with a canopy length of 1170mm / 46.06" or longer.
Load-carrying area: 1256mm (49.44") x 1160.8mm (45.70").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 14.73kg (32.47lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 19kg (42lbs)
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1470Mm(L)...
$1,027.80
$1,142.00
Fit the lightweight Slimpro Canopy Rack Kit so your canopy can tackle those tough cargo-carrying tasks. Thanks to the wide range of smart rack accessories, you can easily switch your set-up to suit work, sports, or camping needs. This Kit is the smart way to maximise your canopy’s cargo-carrying capacity.
Compatible with a canopy length of 1470mm / 57.87" or longer.
Load-carrying area: 1256mm (49.44") x 1358mm (53.46").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 15.33kg (33.8lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 20kg (44lbs)
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1570Mm(L)...
$1,063.80
$1,182.00
The versatile Slimpro Canopy Rack Kit transforms the top of your canopy for unlimited external gear-carrying options. Thanks to the adaptable slat configurations and many Front Runner Rack accessories, you can easily switch from weekday work gear to weekend adventure gear.
Compatible with a canopy length of 1570mm / 61.81" or longer.
Load-carrying area: 1256mm (49.44") x 1560mm (61.41").
Eight (8) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:4x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps4x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT003 - Van Rack Side Profile / 1560mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 16.82kg (37.08lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 26kg (57lbs)
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1772Mm(L)...
$1,099.80
$1,222.00
Unlock essential gear storage opportunities on your canopy with the versatile Slimpro Canopy Rack Kit. The adaptable slat configurations and many Front Runner Rack accessories allow smooth transitions from weekday tradesman essentials to your weekend exploration gear. This Canopy Kit and the rack accessories are the best way to improve external gear carrying on your canopy.
Compatible with a canopy length of 1772mm / 69.76" or longer.
Load-carrying area: 1256mm (49.44") x 1762mm (69.37").
Eight (8) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
4x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps4x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT004 - Van Rack Side Profile / 1762mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 26.25kg (57.87lbs)Shipping Dimensions:Width: 445mm (18")Length: 1770mm (70")Height: 200mm (8")Shipping Weight:Weight: 32kg (70lbs)
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 970Mm(L)...
$708.30
$787.00
The Slimpro Canopy Rack Kit creates those all-important gear storage possibilities on the top of your canopy. The customisable slat configurations allow you to easily carry day-to-day tradesman gear with a quick change to your weekend adventure gear. This Kit is compatible with most Front Runner accessories, and together, they will massively increase external gear-carrying capabilities.
Compatible with a canopy length of 970mm / 38.2" or longer.
Load-carrying area: 1256mm (49.44") x 1175mm (46.25").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T1x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 10.31kg (22.73lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 13kg (29lbs)
FRONT RUNNER Slimpro Van Rack Adjustable Wind Fairing - RRAC329
$173.70
$193.00
Give your van or ride that sought-after rugged and capable look with this width adjustable Wind Fairing. The fairing is also the perfect place to mount a lightbar or spotlights for nighttime adventures.
A Wind Fairing for Slimpro Van Racks.
Secures suitable 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount*, 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount*, Light Pods or Spotlights to your Slimpro Van Racks.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
Provides better airflow by moving air up and over the rack and accessories, reducing drag and wind noise.
Note: Lightbars*, Light Pods and Spotlights are sold separately. 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount requires a minimum rack width of 1345mm.
Consists of:1x Slimpro Van Rack Adjustable Wind Fairing Installation HardwareFitting InstructionsMaterials used:Black powder-coated high strength steelProduct Dimensions:Closed Dimensions:173mm (6.8") L x 1350mm (53.1") W x 115mm (4.5") HOpen Dimensions:173mm (6.8") L x 1568mm (61.7") W x 115mm (4.5") HWeight:3.22kg (7.1lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2367Mm (L)...
$276.30
$307.00
Upgrade your Front Runner Slimpro Van Roof Rack by adding expedition-style side rails. This side rail kit allows the front and back of the rack to remain open for loading larger items such as kayaks, paddleboards and surfboards. It features the same durable, weather-resistant powder-coated finish as the Slimpro Van Roof Rack and adds extra cargo support without adding too much weight or additional wind resistance.
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2367mm / 93.2".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-jointsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2245mm (88.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)
Weight:4.34kg (9.6lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2569Mm (L)...
$283.50
$315.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2569mm / 101.1".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2417mm (95.2") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
4.58kg (10.1lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2973Mm (L)...
$327.60
$364.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2973mm / 117".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
10x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
8x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2649mm (104.3") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.05kg (11.1lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
