All 4WD Parts and Accessories

This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero/Montero CK (3rd Gen) SWB contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRMPT04T - Mitsubishi Pajero/Montero CK (3rd Gen) SWB Slimline II Roof Rack Kit - by Front Runner Consisting of: 3 x FASS013 - Foot Set / 60mm-70mm - by Front Runner 1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner 1 x TRMP002 - Mitsubishi Pajero CK (3rd Gen) SWB Tracks / 1600mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 29.0kg (64.0lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18.0") Length: 1615mm (64.0") Height: 140mm (6.0") Shipping Weight: 34.5kg (76.0lbs)

This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Mitsubishi Pajero/Montero SWB 2nd Gen contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRMP012T - Mitsubishi Pajero/Montero SWB (2nd Gen) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x FASS012 - Foot Set / 40mm-50mm - by Front Runner 1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner 1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner 1 x TRMP005 - Mitsubishi Pajero SWB Tracks / 1620mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.7kg (63.2lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18.0") Length: 1615mm (64.0") Height: 140mm (6.0") Shipping Weight: 34.2kg (75.0lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your Mitsubishi Triton when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1425mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT008 - Mitsubishi Triton (2015-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x LBSK016 - Roof Load Bar Pair 1425mm(W) Material used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 8.32kg (18.34lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6") Length: 1540mm (61") Height: 160mm (6") Shipping Weight: Weight: 8.4kg (18lbs)

This kit creates a full-size rack that sits above your Mitsubishi Triton's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 4 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT039T - Mitsubishi Triton (2015-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.09kg (55.31lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 240mm (9") Shipping Weight: Weight: 25.6kg (56lbs)

This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mitsubishi Triton Double Cab. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRMT002T - Mitsubishi Triton/L200 / 5th Gen (2015-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAMT001 - Mitsubishi Triton/L200 / 5th Gen Foot Rails - by Front Runner 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 25kg (55lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 29.3kg (64.5lbs)

This Front Runner Slimline II Rack accessory allows you to move a Front Runner Easy-Out Awning as the sun changes position -- providing the maximum amount of shade at all times during the day. The arm can be fitted to either the left or right rear corner of a Front Runner Slimline II Rack.* Compatible with the 1.4m, 2m, or 2.5m sized Front Runner Easy-Out Awnings. The awning can be positioned and opened at any angle between the side and the rear of the vehicle and secured using supplied guy-lines. The movable arm has two (2) locking pins to allow securing the arm in windy weather to either the side of the vehicle to the rear. Easy-Out Awnings mount directly to the arm. Compatible with other retractable awnings brands, but drilling may be required to mount the awning track. Supports awnings up to 12kg (26.5lbs). *NOTE: This awning arm only works on racks 1358mm (53.5") L x 1255mm (49.4") W and larger. It will not work when Expedition Rails are installed in the same location as the Moveable Awning Arm. Features Consists of: Movable awning arm Installation hardware Materials used: Black powder-coated steel Product Dimensions: 1234mm (48.6") L x 356mm (14") W x 120mm (4.7") H Weight: 11.26kg (24.8lbs)

These slats can be added to a Slimpro Van Rack to create a custom configuration, additional support and extra mounting points. All hardware and brackets are included to fit to your existing Slimpro Van Rack These slats will work with any Front Runner Slimpro Van Rack that uses 1255mm slats. Features T-slots on both the top and bottom faces. The T-slots allow for quick fitting and removal of accessories and equipment. Made from the same black powder-coated aluminum as all Front Runner Racks. Features Consists of: 1 x Pair of Narrow Slats / 1255mm Installation Hardware Materials used: Black powder coated aluminium Product Dimensions: 1249mm (49.1") L x 60mm (2.4") W x 23mm (0.9") H Weight: 3.74kg (8.25lbs)

These slats can be added to a Slimpro Van Rack to create a custom configuration, additional support and extra mounting points. All hardware and brackets are included to fit to your existing Slimpro Van Rack These slats will work with any Front Runner Slimpro Van Rack that uses 1425mm slats. Features T-slots on both the top and bottom faces. The T-slots allow for quick fitting and removal of accessories and equipment. Made from the same black powder-coated aluminum as all Front Runner Racks. Features Consists of: 1 x Pair of Narrow Slats / 1425mm Installation Hardware Materials used: Black powder coated aluminium Product Dimensions: 1419mm (55.9") L x 60mm (2.4") W x 23mm (0.9") H Weight: 4.26kg (9.4lbs)

These slats can be added to a Slimpro Van Rack to create a custom configuration, additional support and extra mounting points. All hardware and brackets are included to fit to your existing Slimpro Van Rack These slats will work with any Front Runner Slimpro Van Rack that uses 1475mm slats. Features T-slots on both the top and bottom faces. The T-slots allow for quick fitting and removal of accessories and equipment. Made from the same black powder-coated aluminum as all Front Runner Racks. Features Consists of: 1 x Pair of Narrow Slats / 1475mm Installation Hardware Materials used: Black powder coated aluminium Product Dimensions: 1469mm (57.8") L x 60mm (2.4") W x 23mm (0.9") H Weight: 4.4kg (9.7lbs)

To reduce roof rack wind noise and aid the efficient air movement over your rack.. The quick-to-fit Narrow Wind Fairing for Rack will do just that and fits the 1165mm and 1255mm wide trays. A wind fairing for the narrow 1165mm and 1255mm trays. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. A protective vinyl strip is included to protect vehicle paint. Brackets and installation hardware included. Features Consists of: 1 x Low Profile Wind Fairing 1 x Protection Strip Installation Hardware  Fitment Guide Materials used: Black powder-coated high strength steel  Product Dimensions: 87mm (3.4") L x 950mm (37.4") W x 200mm (7.9") H  Weight: 1.53kg (3.4lbs)

Get your third-generation Nissan Frontier ready for any adventure when you fit this Slimline II Roof Rack kit. With 55+ accessories for this rack, you can load up the camping, overlanding and sports gear you need for your adventures. This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan Frontier. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNF004T - Nissan Frontier 3rd Gen (2021-Current) Slimline II Roof Rack Kit Consisting of: 1x FANF001 - Nissan Frontier 3rd Gen (2021-Current) Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 24.42kg (53.84lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 255mm (10") Shipping Weight: Weight: 35kg (77lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your Nissan Navara when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT009 - Nissan Navara (2014-Current) EGR RollTrac Load Bed Load Bar Kit Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x LBSK017 - Roof Load Bar Pair 1475mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 8.54kg (18.83lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6") Length: 1590mm (63") Height: 160mm (6") Shipping Weight: Weight: 8.4kg (18lbs)

This kit creates a full-size rack that sits above your Nissan Navara's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1156mm) and 4 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT042T - Nissan Navara (2014-Current) EGR RollTrac Slimline Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x RRSTM06 - SLII Tray - 1475mm(W)X1156mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 26.15kg (57.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 240mm (9") Shipping Weight: Weight: 26.2kg (58lbs)

This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan Navara D23 4th Gen. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNN005T - Nissan Navara D23 4th Gen (21 - Cur)SLII RRack Kit Consisting of: 1x FANN004 - Nissan Navara D23 4th Gen (2021 - Curr) Foot Rail1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 29.67kg (65.41lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 250mm (10")   Shipping Weight: Weight: 33kg (73lbs)

This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan Navara/Frontier D23 Double Cab. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit)*. All Front Runner Racks are backed by a Limited Lifetime Warranty* *Note: Table opening only works with models that do not have the factory rails fitted. Features KRNN002T - Nissan Navara D23 3rd Gen (2014-2020) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FANN002 - Nissan Navara/Frontier D23 DC Foot Rails - by Front Runner 1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 26kg (57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 240mm (9") Shipping Weight: Weight 30.3kg (66.7lbs)

This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the Nissan NV200 contains the Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNN003T - Nissan NV200 (2009-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2x FASS012 - Foot Set / 40mm - 50mm 1x FASS013 - Foot Set / 60mm - 70mm 1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L) 1x TRAC010 - Universal Track Non Drilled / 1800mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 29.86kg (65.83lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1805mm (71") Height: 270mm (11") Shipping Weight: Weight: 29.2kg (64lbs)

A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRNP009 - Nissan Patrol Load Bar Kit / Gutter Mount - by Front Runner Consisting of: 2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner 1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 7kg (16lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 120mm (5") Length 1455mm (57") Height 170mm (7") Shipping Weight: Weight 8.2kg (18.1lbs)

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y60 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This rack kit is not suitable for under rack table fitment. Features KRNP010L - Nissan Patrol Y60 Slimline II Roof Rack Kit / Low Profile - by Front Runner Consisting of: 4x LASS102 - No 2 Leg 130mm (Pair) 1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L) 1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 41.76kg (92.06lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 140mm (6") Shipping Weight: Weight: 40.72kg (90lbs)

This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the Nissan Patrol Y61. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP012T - Nissan Patrol Y61 3 Door (1998-2010) Slimline II R Consisting of: 4x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG09 - SLII Tray - 1345mm(W)X1762mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 34.46kg (75.97lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 455mm (18"); Length: 1730mm (68"); Height: 270mm (11")   Shipping Weight: Weight: 36kg (79lbs)

This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 Single Cab contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the Nissan Patrol Y61 Single Cab. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP013T - Nissan Patrol Y61 Single Cab Slimline II Roof Rack Consisting of: 1x LASD102 - No 2 Leg Diagonal 130mm (Pair)1x LASS101 - No 1 Leg 120mm (Pair1x RRSTG04 - SLII Tray - 1345mm(W)X752mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 18.59kg (40.98lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18"); Length: 1720mm (68"); Height: 160mm (6")   Shipping Weight: Weight: 22kg (48lbs)

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP004L - Nissan Patrol Slimline II Roof Rack Kit - by Front Runner Consisting of: 3 x No 1 Leg 120mm (Pair) - by Front Runner 1 x No 2 Leg 130mm (Pair) - by Front Runner 1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 34kg (74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 39.2kg (86.2lbs)

This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit the Nissan Patrol Y61 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNPT06L - Nissan Patrol Y61 Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 2x LASS027 - Leg Spacer 6mm (Pair)4x LASS103 - No 3 Leg 155mm (Pair)1x RRSTG11 - SLII Tray - 1345mm(W)X2166mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 39.17kg (86.35lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 40.03kg (88lbs)

This 2166mm/85.3 long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan Patrol/Armada Y62. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNP011T - Nissan Patrol/Armada Y62 (2010-Current)SlimlineIIRoof Rack Kit - by Front Runner Consisting of: 1 x FANP001 - Nissan Patrol/Armada Y62 (2010-Current) Foot Rails - by Front Runner 1 x RRSTG11 - Slimline II Tray - 1345mm(W) X 2166mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 39kg (86lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1615mm (64") Height 240mm (9") Shipping Weight: Weight: 45.2kg (99.4lbs)

This 1964mm/77.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Nissan Xterra N50. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRNX005T - Nissan Xterra N50 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FANX002 - Nissan Xterra N50 Foot Rails - by Front Runner 1 x RRSTA10 - Slimline II Tray - 1165mm(W) X 1964mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 32kg (69lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 36.6kg (80.6lbs)

Compatible with Peugeot Boxer (L1H1/118" WB) (2014-Current) low roof vans with a vehicle length of 4963mm / 195.4". Load-carrying area: 2570mm (101.2") x 1565mm (61.6"). Six (6) Mounting Feet secure into van's existing factory mounting points. Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5"). Compatible with most Front Runner side mount accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVPB001T - Peugeot Boxer (L1H1/118" WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 3x FAVF002 - FPCR Foot Set - by Front Runner 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 4x RRNS1475 - Narrow Slat / 1475mm (Pair) 1x SPVT001 - Van Rack Side Profile / 1156mm 1x SPVT002 - Van Rack Side Profile / 1358mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 2570mm (101.2") L x 1565mm (61.6") W x 127mm (5") H Approximate Installed Weight: 30.99kg (68.32lbs) Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 35.35kg (78lbs)

Compatible with Peugeot Boxer (L2H1/136" WB) 2014-Current low roof vans with a vehicle length of 5413mm / 213.1". Load-carrying area: 2974mm (117.1") x 1565mm (61.6"). Six (6) Mounting Feet secure into van's existing factory mounting points. Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5"). Compatible with most Front Runner accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVPB002T - Peugeot Boxer (L2H1/136" WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 3x FAVF002 - FPCR Foot Set - by Front Runner 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 4x RRNS1475 - Narrow Slat / 1475mm (Pair) 1x SPVT002 - Van Rack Side Profile / 1358mm 1x SPVT003 - Van Rack Side Profile / 1560mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 31.49kg (69.42lbs) Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 37.35kg (82lbs)

Compatible with Peugeot Boxer (L2H2/136" WB) (2014-Current) High roof vans with a vehicle length of 5413mm / 213.1". Load-carrying area: 2974mm (117.1") x 1565mm (61.6"). Six (6) Mounting Feet secure into van's existing factory mounting points. Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5"). Compatible with most Front Runner accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVPB003T - Peugeot Boxer (L2H2/136" WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 3x FAVF002 - FPCR Foot Set - by Front Runner 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 4x RRNS1475 - Narrow Slat / 1475mm (Pair) 1x SPVT002 - Van Rack Side Profile / 1358mm 1x SPVT003 - Van Rack Side Profile / 1560mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H Approximate Installed Weight: 31.49kg (69.42lbs) Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 37.35kg (82lbs)

Compatible with Peugeot Boxer (L4H2/159" WB) (2014-Current) high roof vans with a vehicle length of 6363mm / 250.5". Load-carrying area: 3928mm (154.6") x 1565mm (61.6"). Ten (10) Mounting Feet secure into van's existing factory mounting points. Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5"). Compatible with most Front Runner accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVPB005T - Peugeot Boxer (L4H2/159" WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 5x FAVF002 - FPCR Foot Set - by Front Runner 2x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 5x RRNS1475 - Narrow Slat / 1475mm (Pair) 1x SPVT001 - Van Rack Side Profile / 1156mm 2x SPVT002 - Van Rack Side Profile / 1358mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 3928mm (154.6") L x 1565mm (61.6") W x 127mm (5") H Approximate Installed Weight: 42.17kg (92.97lbs) Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 300mm (12") Length: 1805mm (71") Height: 195mm (8") Shipping Weight: Weight: 43.35kg (95lbs)

This kit creates a full-size rack that sits above your Pickup's load bed when fitted with a EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This rack kit is not suitable for the Volkswagen Amarok. If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT033T - Pickup EGR RollTrac Slimline II Load Bed Rack Kit / 1425(W) x 1358(L) - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount 1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 29.29kg (64.57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1730mm (68") Height: 195mm (8") Shipping Weight: Weight: 28kg (62lbs)

This Slimsport Kit is suited for truck canopies/camper shells/caps. This low profile flat deck Slimsport rack has a load carrying area of 1350mm (53.1") x 1211mm (47.7"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner (sold separately) for all Front Runner side mount accessories. Fitment guide and all mounting hardware included. Note: Drilling required. Note: Under Rack Tables are not compatible with the Slimsport rack kit range Features KSCA001 - Pickup Load Bed 5.5'Canopy/Cap/Trailer Slimsport Rack Kit Consisting of: 1 x Pickup Load Bed 5.5'Canopy/Cap/Trailer Slimsport Tray 1 x Installation Hardware 1 x Fitting Instructions Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 1350mm (53.1") L x 1211mm (47.7") W x 63mm (2.5") H Approximate Installed Weight: 16.99kg (37.46lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 240mm (9") Length: 1560mm (61") Height: 100mm (4") Shipping Weight: Weight: 17.17kg (38lbs)

This kit creates a full-size rack that sits above your Polaris Ranger load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 752mm) and 4 Pickup Truck Bed Universal Legs that fit into the Load Bed Mount. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRPR002T - Polaris Ranger Slimline II Load Bed Rack Kit Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount 1x LASS043 - Polaris Ranger Load Bed Mount 1x RRSTG04 - SLII Tray - 1345mm(W)X752mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 24.9kg (54.9lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 265mm (10") Shipping Weight: Weight: 31kg (68lbs)

The powerful Porsche 911 has little gear-carrying carrying capacity unless you fit Front Runner's modular Slimline II Roof Rack Kit. The Wind Deflector will help to minimize rack noise, while the tray is the perfect place to put extra cargo, your spare wheel or other gear.   This 954mm/37.6" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Porsche 911. It easily installs using the existing factory mounting points. No drilling required.All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRPN002T - Porsche 911 (997 Model) Slimline II Roof Rack Kit Consisting of: 1x FAPN001 - Porsche 911(997 Model) Mounting Bracket 1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 16.8kg (37.04lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 290mm (11") Shipping Weight: Weight: 23kg (51lbs)

This 954mm/37.6" long, full-size, Slimline II cargo carrying roof rack kit for the Porsche 924 contains the Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This Kit requires the vehicle to have protruding side gutters to be fitted. If unsure of fitment, please contact Front Runner Support. Features KRPN001T - Porsche 924 Slimline II Roof Rack Kit - by Front Runner Consisting of: 2x LASD102 - No 2 Leg Diagonal 130mm (Pair)2x RRAC034 - Inter-Slat Bracket1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 22.54kg (49.69lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")   Shipping Weight: Weight: 43.4kg (95lbs)

This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Porsche Cayenne contains Slimline II Tray, Wind Deflector and 4 Feet. Installs easily to factory/OEM tracks with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRPC001T - Porsche Cayenne (2002-2010) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner 2 x RRAC907 - Stud Plate MB Sprinter Track 1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 22.8kg (50.3lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18.0") Length: 1615mm (64.0") Height: 140mm (6.0") Shipping Weight: 25.3kg (56.0lbs)

Theres no better place to keep potentially hot, grimy, dirty, and cumbersome camp kitchen supplies than up and out of the way, outside the vehicle. The Front Runner Potjie Pot Carrier offers a sensible way to travel with a potjie pot. The potjie pot is secured in the bracket by the three legs. The supplied ratchet strap threads through the lid of the pot and fixes points on the bracket. The #3 cast iron pot holds 7.8L / 2.1 Gallons. The round shape and cast iron allows the heat to flow evenly around the sides and maintain liquids at the lowest point to keep them from burning. The lid has a deep lip for holding hot coals. The high strength steel carrier is finished with the same durable, weather resistant powder coating as the Front Runner Slimline II Rack. Like all Front Runner rack accessories, the installation is simple. Just slide the bolts into the t-slots of any Front Runner Rack Tray, set down the carrier, then add nuts and tighten. Features Consists of: Rack mounted bracket Strap guide Ratchet strap mounting hardware No 3 cast iron pot Materials used: Black powder-coated high strength steel Nylon strap Cast iron pot Product Dimensions: 280mm (11") W x 280mm (11") D x 343mm (13.5") H Pot Specifications: No. 3 potjie Pot - 7.8l (2.1gal) capacity Max outer diameter: 290mm (11.4") Height: 300mm (11.8") Lid max outer diameter: 260mm (10.2") Total Weight: 11.25kg (24.9lbs)

Create deliciously hearty meals out in the wilderness, fit for the avid explorer and overlanding veterans alike. The Front Runner Potjie Pot/Dutch Oven Carrier is a safe and durable means of transporting your potjie pot/dutch oven where ever your travels may take you. The potjie pot/dutch oven is placed centrally into the bracket with the three legs fitting into the holes in the three protrusions extending from the centre of the bracket. The supplied ratchet strap threads through the lid of the pot and fixes to pre-drilled points on the bracket. Made of corrosion resistant steel and black powder-coated with an industry preferred, outdoor rated coating. Features Consists of: Potjie bracket for No 2 & No 3 pot Ratchet strap Mounting hardware Materials used: Black powder-coated steel Product Dimensions: 276mm (10.9") L x 229mm (9") W x 133mm (5.2") H Weight: 2kg (4.4lbs)

Add this strong, steel Side Molle Panel to make your Pro Bed Rack even more versatile. This 1200mm/47.2" long, Molle Panel easily slides into the side extrusions to create that extra storage space we all need. A great place to put gear you might need in a hurry. This Pro Bed Rack Side Molle Panel creates even more storage space to attach various accessories to the outside of the bed rack for easy access. It fits onto the sides of the Pro Bed Rack by sliding into the side extrusions. No drilling is required. Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack. Features Consists of: 4 x Molle Panel Installation Hardware Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 1200mm (47.2") L x 30mm (1.18") W x 496mm (19.53") H Weight: 7.7kg (17lbs)

Add this strong, steel Side Molle Panel to make your Pro Bed Rack even more versatile. This 1400mm/55.1" long, Molle Panel easily slides into the side extrusions to create that extra storage space we all need. A great place to put gear you might need in a hurry. This Pro Bed Rack Side Molle Panel creates even more storage space to attach various accessories to the outside of the bed rack for easy access. It fits onto the sides of the Pro Bed Rack by sliding into the side extrusions. No drilling is required. Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack. Features Consists of: 4 x Molle Panel Installation Hardware Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 1400mm (55.12") L x 30mm (1.18") W x 496mm (19.53") H Weight: 9.2kg (20.3lbs)

When stuck, you want quick access to your recovery boards. This is exactly what the Pro Bed Recovery Bracket offers, allowing you to conveniently attach your MAXTRAX, Tred Pro or Tred GT to the Pro Bed System. This Pro Bed Recovery Bracket bolts on the top and bottom side of the Pro Bed System. To attach your MAXTRAX, use the included Pro Bed Recovery Device Mounting Hardware or MAXTRAX Mounting Pin Set * Sold Separately. The included Pro Bed Recovery Device Mounting Hardware can be used to mount your Tred Pro and Tred GT Recovery Boards. Mounting holes could be used mount other accessories to your Pro Bed System or Pro Bed Rack Kit. As a universal solution, the Pro Bed Universal Accessory Mount is available. For a complete water solution, Front Runner offers the Pro Bed Water Kit / 20L. Made of high strength steel and coated in the same durable, weather-resistant black powder coating as the Front Runner Rack. Features Consists of: 1 x Pro Bed Universal Accessory Mount 1 x Pro Bed Recovery Device Mounting Hardware Installation Hardware Fitment Guide Materials used: Black powder coated steel Product Dimensions: 490mm (19.3") L x 200mm (7.9") W x 30mm (1.9") H (Per Single Bracket) Weight: 3.28kg (7.2lbs)

Water must be easily accessible when on the road in your rig. That is exactly what the lockable Pro Bed Water Kit offers, as it attaches to the side of your Pro Bed System, 20 litres of water at your disposal. This Pro Bed Water Kit / 20L bolts on the side of the Pro Bed System. Install this mount onto your Pro Bed System to allow quick and easy access to your 20L Pro Water Tank. Easily remove your water tank by loosening the stainless-steel eye nuts. The water tank can be locked for added peace of mind using the Rack Accessory Lock / Small (sold separately). Plastic alignment spacers protect, align and secure your water tank. Mounting holes could be used mount other accessories to your Pro Bed System or Pro Bed Rack Kit. As a recovery solution, the Pro Bed Recovery Bracket is available. Made of high strength steel and coated in the same durable, weather-resistant black powder coating as the Front Runner Rack. Features Consists of: 1 x Pro Bed Universal Accessory Mount 1 x Universal Side Mount for Pro Water Tank / 20L 1 x Pro Water Tank With Tap / 20L Installation Hardware Fitment Guide Materials used: Black powder coated steel Food grade BPA free polyethylene Water Tank Assembled Product Dimensions: 470mm (18.5") L x 224mm (8.8") W x 490mm (19.3") H Weight: 6.82kg (15lbs)

Easily install onto your Front Runner Rack in minutes. No front wheel removal necessary. Suitable for all bike sizes; all frame styles including composite carbon frames; all thru axle and brake configurations as well as Lefty forks and full suspension bikes. Front wheel holder is easily adjusted and holds the bike steady while the rear Wheel Holder is secured. Adjustable to secure most wheel diameters including road bikes, MTB and fat bikes with tire widths ranging from 18mm/0.7" up to 132mm/5.2". The carrier folds flat and secures onto your rack when not in use. Bike can be locked using Rack Accessory Lock / Large. Constructed with same weather resistant stainless steel and powder coating as the Front Runner racks and mounting systems. Features Consists of: 1 x Bike Carrier 1 x Bike Carrier Rack Clamp 1 x Rear Wheel Holder Installation Hardware Fitting Instructions Materials used: Black powder coated steel Plastic Product Dimensions: Bike Carrier (Closed): 825mm (32.5") L x 205mm (8.1") W x 100mm (3.9") H Rear Wheel Holder: 230mm (9.1") L x 170mm (6.7") W x 70mm (2.8") H Weight: 9.4kg(20.7lbs) Special Notes: Suitable for all bike sizes incl. Fat Bikes

Fits most size canoes, kayaks, SUPs and surf skis. The space between the brackets is only limited by the length of your Front Runner Roof Rack or distance between your Load Bars. Highly adjustable brackets allow for multiple mounting angles for your canoe, kayak or SUP. The foam-padded holders are self-adjusting for the perfect fit to the hull of your boat. The dense weather-resistant open cell foam pads are covered with a water-repellent polyester cover that is UV stabilized to prevent fading. Pads can be easily replaced if damaged in any way. Toys are secured to the Canoe / Kayak / SUP Carrier using the supplied Front Runner Stratchits straps and eye nuts. The included Front Runner adjustable and stretchable Stratchits are the perfect tie-down for serious cargo. The quick and efficient straps will keep loads stable and secure without damaging surfaces and are rated up to 300 lbs. The Stratchit's clever cinching system creates an easy-on, and easy-off, secure transport every time. Complete kit includes everything necessary to secure your water toys to Front Runner Roof Racks or Load Bars. Weight limit: 60kg (132 lbs). Features Consists of: 2 x Adjustable Holders 4 x Pads 1 x Pair of Stratchits 4 x Eye nuts Installation Hardware Fitting Instructions Materials used: Adjustable Holders: Black powder coated steel EPE (Expandable Polyethylene) foam Pads: 100% UV protected polyester outer shell 100% polyester lining Product Dimensions (fully opened): 700mm (27.6") L x 75mm (3") W x 112mm (4.4") H (Single Holder) Weight: 6.2kg (13.7lbs) (Holder Set)

Upright bike carrier, made from strong steel and aluminum. Powder-coated in the same durable finish as the Front Runner rack and load bars for durability. Front fork clamp features a quick release that fits all standard fork dropouts. Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires. Quickly secure and adjust the rear wheel with the robust ratcheting buckle and strap. Note: Fitment to a rack requires a minimum rack length of 1156mm (6 slats). Note: This solution is not compatible with Boost Hubs/Forks. Features Consists of: 1 x Fork Clamp 1 x Rear Wheel Holder Installation Hardware Fitting Instructions Materials used: Black powder coated steel & aluminum Rubber ladder strap Plastic ratchet buckle Overall Product Dimensions: 300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H Rear Holder: 230mm (9.1") L x 176mm (6.9") W x 81mm (3.2") H Front Clamp: 70mm (2.8") L x 152mm (6") W x 114mm (4.5") H Weight: 1.6kg (3.5lbs)

An ideal solution for meals, food preparation, and gear staging while traveling. Aluminum locking legs. Sturdy and lightweight. Operational height 730mm (28.7") Hygienic, easy to clean stainless steel top -- just like the pros use in restaurants around the world. The table frame and legs are finished with the same durable, corrosion resistant black powder coating as the Front Runner Slimline II Roof Rack. Rounded glass filled nylon corners prevent accidental nicks or damage. Ultra slim and can be mounted securely for rattle free transport underneath most Front Runner Slimline II Roof Racks using the Pro Stainless Steel Table Under Rack Bracket* *For details on fitment see below. * WILL A FRONT RUNNER TABLE FIT UNDER MY SLIMLINE II ROOF RACK? There are 2 factors to consider: Is the roof rack TALL ENOUGH? All Roof Rack kits with a designated TALL mounting option have room to fit a table underneath. If your Slimline II Roof Rack uses a Front Runner Foot Rail mounting system, a table will also fit underneath. Many other Front Runner Roof Rack kits have enough height to mount a table underneath, but please keep in mind, we recommend 65mm/2.5 of clearance between the bottom of the roof rack and the highest point of the roof. Is the roof rack LONG ENOUGH? For REAR MOUNT installation, the table requires a Slimline II Roof Rack that is 1358mm or longer (7 slats). Please check the SPECS tab on any Slimline II Roof Rack for exact measurements of the rack tray. For a SIDE MOUNT installation, the table requires a 5 slat opening (the space between feet/legs). All Front Runner Foot Rail mounting systems have an opening that fits all widths of tables. NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit. If youre still not sure if your rack will work with a table underneath, please contact us.

A complete camp table and table storing solution. Effortlessly take a previously cumbersome luxury item on any vehicle based adventure. Pro Stainless Steel Camp Table - by Front Runner: The extruded aluminum frame nests into the storage brackets and is secured with the table latch eliminating any excessive noise. A durable stainless steel table top ensures a hygienic surface for the preparation and serving of meals. The table frame and legs are powder-coated black with the same durable, corrosion resistant coating as the Front Runner Slimline II Roof Rack. The Legs easily unfold and with the open-and-lock mechanism are kept firmly in place. Rounded glass filled nylon corners prevent any accidental knicks or damage and provide a grip point when removing the table from under your roof rack. Under-Rack Table Brackets - by Front Runner: A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Camp Table. The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the options to access to the table from the side or rear of the vehicle. Easy installation. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. Under-Rack Table Slides Latch - by Front Runner: Keeps the Pro Stainless Steel Camp Table securely stored in the Under-Rack Table Brackets - by Front Runner. Secured to the top of the Slimline II roof rack using the T-slot and clamps over the lip of the table to keep it in place. A rubber insert prevents rattling and damage to the table. Spring loaded for ease of use. Lockable for added security. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. NOTE: Table fitment requires 65mm (2.5") clearance from under the rack to highest point of the roof. Side mounting requires 5 open slats Rear mounting not suitable for vehicles with rear roof antenna Still unsure? Contact the Front Runner Help Center Features Consists of: 1 x Table 1 x Storage Slides 1 x Latch Table: Materials used: Black powder coated Aluminium Steel Product Dimensions: 750mm (29.5") W x 1130mm (44.5") L x 32mm (1.3") H Height when opened: 730mm (28.7") Weight: 11.82kg (26.1lbs) Table Slide: Materials used: Black powder coated Steel Product Dimensions: 881mm (34.7") L x 187mm (7.4") W x 46mm (1.8") H Weight: 2.4kg (5.3lbs) Table Latch: Materials used: Black powder coated Steel PVC Grommet Product Dimensions: 91mm (3.6") L x 51.7mm (2") W x 47mm (1.9") H Weight: 191g (6.7oz) Full Kit Dimensions: 1130mm (44.5") L x 775mm (30.5") W x 55mm (2.2") H Full Kit Weight: 15.2kg (33.5lbs)   TABLE CARE: Keep your table clean and sparkling with these easy care instructions. Add a small amount of dish soap to a damp soft cloth. Wipe the table along the grain of your tabletop. Dry excess moisture with a dry towel. Quickly add polish by dabbing on a small amount of mineral or baby oil, wiping with the grain of the stainless steel. Done!

An ideal solution for meals, food preparation, and gear staging while traveling. Aluminum locking legs. Sturdy and lightweight. Operational height 734mm (28.9") Hygienic, easy to clean stainless steel top -- just like the pros use in restaurants around the world. The table frame and legs are finished with the same durable, corrosion resistant black powder coating as the Front Runner Slimline II Roof Rack. Rounded glass filled nylon corners prevent accidental nicks or damage. Ultra slim and can be mounted securely for rattle free transport underneath most Front Runner Slimline II Roof Racks using the Pro Stainless Steel Table Under Rack Bracket* *For details on fitment see below. * WILL A FRONT RUNNER TABLE FIT UNDER MY SLIMLINE II ROOF RACK? There are 2 factors to consider: Is the roof rack TALL ENOUGH? All Roof Rack kits with a designated TALL mounting option have room to fit a table underneath. If your Slimline II Roof Rack uses a Front Runner Foot Rail mounting system, a table will also fit underneath. Many other Front Runner Roof Rack kits have enough height to mount a table underneath, but please keep in mind, we recommend 65mm/2.5 of clearance between the bottom of the roof rack and the highest point of the roof. Is the roof rack LONG ENOUGH? For REAR MOUNT installation, the table requires a Slimline II Roof Rack that is 1358mm or longer (7 slats). Please check the SPECS tab on any Slimline II Roof Rack for exact measurements of the rack tray. For a SIDE MOUNT installation, the table requires a 3 slat opening (the space between feet/legs). All Front Runner Foot Rail mounting systems have an opening that fits all widths of tables. NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit. If youre still not sure if your rack will work with a table underneath, please contact us. Features Consists of: 1 x Table Materials used: Black powder-coated aluminum Stainless steel Product Dimensions: 1130mm (44.5") L x 550mm (21.7") W x 35mm (1.4") H Height when opened: 734mm (28.9") H Weight: 10.03kg (22.1lbs) TABLE CARE: Keep your table clean and sparkling with these easy care instructions. Add a small amount of dish soap to a damp soft cloth. Wipe the table along the grain of your tabletop. Dry excess moisture with a dry towel. Quickly add polish by dabbing on a small amount of mineral or baby oil, wiping with the grain of the stainless steel. Done!

This lightweight, sturdy prep-sized camp table is ideal for food preparation, food serving, and gathering around to eat. Features include a stainless steel top and black powder-coated aluminum frame. Specifically designed to be easily stored UNDERNEATH most Front Runner Slimline II Roof Racks.*The Pro Stainless Steel Prep Table Kit includes the Pro Stainless Steel Prep Table, Under-Rack Table Slides and Under-Rack Table Slides Latch. A complete prep table and table storing solution. Effortlessly take a previously cumbersome luxury item on any vehicle based adventure.   Pro Stainless Steel Prep Table - by Front Runner: The extruded aluminum frame nests into the storage brackets and is secured with the table latch eliminating any excessive noise. A durable stainless steel table top ensures a hygienic surface for the preparation and serving of meals. The table frame and legs are powder-coated black with the same durable, corrosion resistant coating as the Front Runner Slimline II Roof Rack. The Legs easily unfold and with the open-and-lock mechanism are kept firmly in place. Rounded glass filled nylon corners prevent any accidental knicks or damage and provide a grip point when removing the table from under your roof rack.   Under-Rack Table Brackets - by Front Runner: A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Prep Table. The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the options to access to the table from the side or rear of the vehicle. Easy installation. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.   Under-Rack Table Slides Latch - by Front Runner: Keeps the Pro Stainless Steel Prep Table securely stored in the Under-Rack Table Brackets - by Front Runner. Secured to the top of the Slimline II roof rack using the T-slot and clamps over the lip of the table to keep it in place. A rubber insert prevents rattling and damage to the table. Spring loaded for ease of use. Lockable for added security. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. NOTE: Table fitment requires 65mm (2.5") clearance from under the rack to highest point of the roof.Side mounting requires 4 open slatsRear mounting requires 7 open slats and is not suitable for vehicles with rear roof antennaStill unsure? Contact the Front Runner Help Center WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consists of:1 x Table1 x Storage Slides1 x LatchTable:Materials used:Black powder-coated aluminumSteelProduct Dimensions:1130mm (44.5") L x 550mm (21.7") W x 35mm (1.4") HHeight when opened: 734mm (28.9") HWeight:10.03kg (22.1lbs)Table Slide:Materials used:Black powder-coated SteelProduct Dimensions:881mm (34.7") L x 187mm (7.4") W x 46mm (1.8") HWeight:2.4kg (5.3lbs)Table Latch:Materials used:Black powder-coated SteelPVC GrommetProduct Dimensions:91mm (3.6") L x 51.7mm (2") W x 47mm (1.9") HWeight:191g (6.7oz)Full Kit Dimensions:1165mm (45.9") L x 642mm (25.3") W x 109mm (4.3") HFull Kit Weight:12.6 Kg (27.8lbs) TABLE CARE: Keep your table clean and sparkling with these easy care instructions. Add a small amount of dish soap to a damp soft cloth.Wipe the table along the grain of your tabletop.Dry excess moisture with a dry towel.Quickly add polish by dabbing on a small amount of mineral orbaby oil, wiping with the grain of the stainless steel.  

These brackets have been designed to work in conjunction with the Pro Stainless Steel Camp Table, the Pro Stainless Steel Prep Table and Under-Rack Table Latch - by Front Runner to make taking a sturdy table along with you on your travels as simple and effortless as possible. Pro Stainless Steel Table Under Rack Bracket - by Front Runner: A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Camp/Prep Table or Pro Stainless Steel Prep Table with Basin - by Front Runner. The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the option to access to the table from either the side or rear of the vehicle. Easy installation. Made of steel that is black powder coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. Under-Rack Table Slides Latch - by Front Runner: Keeps the Pro Stainless Steel Camp/Prep Table or Pro Stainless Steel Prep Table with Basin - by Front Runner securely stored in the Under-Rack Table Brackets - by Front Runner. Secured to the top of the Slimline II rack using the T-slot and clamps over the lip of the table to keep it in place. A rubber insert prevents rattling and damage to the table. Spring loaded for ease of use. Lockable for added security. Made of steel that is black powder coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack. NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit. Features Consists of: 1 x Pair of Storage Slides 1 x Table Latch Installation Hardware Materials used: Black powder-coated Steel PVC Grommet Product Dimensions: 881mm (34.7")L x 187mm (7.4")W x 46mm (1.8")H Weight: 2.4kg (5.3lbs) TABLE CARE: Keep your table clean and sparkling with these easy care instructions. Add a small amount of dish soap to a damp soft cloth. Wipe the table along the grain of your tabletop. Dry excess moisture with a dry towel. Quickly add polish by dabbing on a small amount of mineral or baby oil, wiping with the grain of the stainless steel. Done!

Made of stainless steel and sealed with the same durable, weather rated powder coating as the Front Runner Slimline Roof Racks. The ultra dense yet soft weather resistant rubber pads cradle your valuable gear without harming or scratching the surfaces. The Stratchit straps clever cinching system mean easy-on and easy-off secure transport every time. Adjustable to hold all shapes and lengths of boards across the width and length of Front Runner Slimline Roof Racks or Front Runner Load Bars. Each Front Runner Board Carrier can hold 1 to 2 boards. Most Front Runner Roof Racks and Load Bar widths will accommodate a 2nd Front Runner Board Carrier to hold up to 4 boards. Includes: 2 pairs of board holders 1 pair of Front Runner Stratchits All hardware necessary to mount to a Slimline Roof Rack, Load Bars, or other flat surface. Installation Manual Made in South Africa Features Consists of: 2x Brackets 2x Stratchit Strap Bolt Kit Materials used: Black powder-coated Steel Polyethylene pads Product dimensions: L 276mm (10.9") x W 76mm (3") x H 67mm (2.6") Weight: Individual bracket: 0.6kg (1.3lbs) Entire kit: 2.9kg (6.4lbs)

Designed to mount bikes with 100/110mm x 12mm, 100/110mm x 15mm, and 110/110mm x 20mm thru-axles (Boost) Compatible with pinch style forks such as Fox40, Manitou Dorado and Marzocchi 380 Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires. Rear wheel holder features a ratchet buckle and strap that allows fast adjustment Works with Front Runner Racks and Load Bars Made from steel and aluminum and powder-coated for durability and longevity Note: Installation requires a minimum rack length of 1156mm (six slats). Features Consists of: 1 x Front Fork Mount 1 x Rear Wheel Mount 1 x Pair of inserts for 12mm 100/110 Thru Axle 1 x Pair of Inserts for 15mm 100/110 Thru Axle 1 x Pair of inserts for 20mm 100/110 Thru Axle Installation Hardware Fitting Instructions Materials used: Black powder coated steel Black powder coated aluminum Product Dimensions: 300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H Weight: 1.5kg (3.3lbs)