All products except nomadiQ and Alpine

Introducing the VSS System for the Range Rover Sport HSE (2005 – 2012), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  80W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours Installation Difficulty – EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 80W Maximum Power Voltage (Vmp) 24V Open Circuit Voltage (Voc) 27V Maximum Power Current (Imp) 3.33A Short Circuit Current (Isc) 3.67A

Introducing the VSS System for the  Subaru Forester (2002-2013), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  85W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 85W Maximum Power Voltage (Vmp) 17V Open Circuit Voltage (Voc) 21V Maximum Power Current (Imp) 5A Short Circuit Current (Isc) 5.5A

Introducing the VSS System for the BYD Shark (2024 – Present), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  86W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 86W Maximum Power Voltage (Vmp) 24.36V Open Circuit Voltage (Voc) 28.74V Maximum Power Current (Imp) 3.49A Short Circuit Current (Isc) 3.83A

Introducing the VSS System for the  Toyota LandCruiser 100 Series (1998 - 2007) , the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  100W of clean solar energy to keep your vehicles battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits – Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 100W Maximum Power Voltage (Vmp) 21V Open Circuit Voltage (Voc) 24.78V Maximum Power Current (Imp) 4.76A Short Circuit Current (Isc) 5.23A

Introducing the 115-Watt VSS System for the Ford F 150 Lightning (2022-2025), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  115W of clean solar energy to keep your Ranger battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 115W Maximum Power Voltage (Vmp) 23V Open Circuit Voltage (Voc) 27.14V Maximum Power Current (Imp) 5A Short Circuit Current (Isc) 5.5A

Introducing the VSS System for the  GMC Sierra 1500 (2019-2022), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  85W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 85W Maximum Power Voltage (Vmp) 17V Open Circuit Voltage (Voc) 21V Maximum Power Current (Imp) 5A Short Circuit Current (Isc) 5.5A

Introducing the VSS System for the Toyota RAV4 (2019 – Present), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  85W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 85W Maximum Power Voltage (Vmp) 17V Open Circuit Voltage (Voc) 21V Maximum Power Current (Imp) 5A Short Circuit Current (Isc) 5.5A

Introducing the VSS System for the Toyota Hilux, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  95W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 95W Maximum Power Voltage (Vmp) 17V Open Circuit Voltage (Voc) 21V Maximum Power Current (Imp) 5.3A Short Circuit Current (Isc) 5.82A

Introducing the VSS System for the SsangYong Musso (2022 to current) 100-Watt bonnet solar panel, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  100W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 100W Maximum Power Voltage (Vmp) 21V Open Circuit Voltage (Voc) 24V Maximum Power Current (Imp) 4.76A Short Circuit Current (Isc) 5.23A

Introducing the 75W VSS System for the Toyota HiAce Van, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  75W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 75W Maximum Power Voltage (Vmp) 19V Open Circuit Voltage (Voc) 22.42V Maximum Power Current (Imp) 3.94A Short Circuit Current (Isc) 4.34A Maximum system voltage: 500V Net Weight: 2kg J-Box: IP 68 rated with 1.5m/5ft cables

Introducing the VSS System for the Nissan Patrol GU (Y61 Model), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  90W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional PWM Solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 90W Maximum Power Voltage (Vmp) 17.5V Open Circuit Voltage (Voc) 20.65V Maximum Power Current (Imp) 5.18A Short Circuit Current (Isc) 5.65A

The SmartSolar MPPT is packed with advanced technology to get the most out of your solar panels whilst protecting your batteries. It operates at 98% efficiency with natural cooling and is engineered to withstand the toughest conditions.Its lightning-fast maximum power point tracking converts all available sunlight into useful energy. Its charge algorithms enhance power output and extend battery life by intelligently managing charging cycles. Built-in SafetyShield+ features such as over-temperature, short-circuit, and reverse polarity protection safeguard your batteries from potential issues.Simply put: the SmartSolar MPPT is the smartest solar charge controller under the sun. APP Download For iPhone or Android, download “VictronConnect” in Apple APP Store or  Google Play Store

130W 12V ETFE Black Flexible Solar Panel for RVs, Campers, Boats, Roof Top Tent, Cabin...etc.Cutting Edge Technology Protect The Solar Cells, Tougher, Lighter, DurableMade of Latest Technology BC Solar Cells with 25.8% High EfficiencyPERC 9BB Cell Technology, Uniquely designed 9 busbar solar cells deliver ultra-high power in a small footprint.And more durable than other mono solar cells. Reduce the risks of the cells’ crack and the damage of busbars, solar array with higher stability and reliability and higher power output.FeaturesSpecifications Electrical Information: Model: VS-130FX2 Peak power: 130W Solar cell efficiency: 25.8% Maximum power voltage: 19.14V Maximum power current: 6.7A Open circuit voltage: 22.89V Short circuit current: 7.37A Power allowance range: +/-3% Maximum system voltage: 500V Values at standard test conditions: Air Mass - AM1.5, Irradiance - 1000W/m2, Cell Temperature - 25°C Material Information: Laminated for weather resistance Laminated with fiberglass + ETFE + Silicon cell + EVA + Tedlar Solar cells: PERC 9BB Monocrystalline Dimensions: 1090x590x2.5mm Net Weight: 2.2kgs Back sheet: Black Fiberglass J-Box: IP 68 rated with 90cm/3ft cables

Designed to protect your system from overloads and short circuits, this 20A inline fuse connects easily between your power source and accessories. Featuring Anderson connectors on both ends for a quick, secure install, with a durable, weather-resistant housing built for off-grid conditions.

The SmartSolar MPPT is packed with advanced technology to get the most out of your solar panels whilst protecting your batteries. It operates at 98% efficiency with natural cooling and is engineered to withstand the toughest conditions.Its lightning-fast maximum power point tracking converts all available sunlight into useful energy. Its charge algorithms enhance power output and extend battery life by intelligently managing charging cycles. Built-in SafetyShield+ features such as over-temperature, short-circuit, and reverse polarity protection safeguard your batteries from potential issues.Simply put: the SmartSolar MPPT is the smartest solar charge controller under the sun. APP Download For iPhone or Android, download “VictronConnect” in Apple APP Store or  Google Play Store

Built to safeguard your solar setup from overloads and short circuits, this 20A inline fuse connects seamlessly between your panel and system. With MC4 to Anderson connectors, it offers a simple plug-and-play solution in a tough, weather-resistant housing.

2x 140W 12V ETFE black flexible solar panel mounted on a Fiberglass backing plate, for RVs, campers, boats, roof top tent, cabin...etc. Cutting edge technology protects the solar cells, tougher, lighter and more durable. Modular system allows adding a number of panels together, solar array with higher stability with reliability and higher power output. Made of latest technology PERC 9BB solar cells with 23.5% high efficiency. PERC 9BB cell technology, uniquely designed 9 busbar solar cells deliver ultra-high power in a small footprint. And more durable than other mono solar cells. Reduce the risks of the cells’ crack and the damage of busbars. Approximate Installation Time - 2 Hours  Installation Difficulty - Easy FAQsSpecifications Electrical Information: Model: VS-130FX2 Peak power: 130W Solar cell efficiency: 25.8% Maximum power voltage: 19.14V Maximum power current: 6.7A Open circuit voltage: 22.89V Short circuit current: 7.37A Power allowance range: +/-3% Maximum system voltage: 500V Values at standard test conditions: Air Mass - AM1.5, Irradiance - 1000W/m2, Cell Temperature - 25°C Material Information: Laminated for weather resistance Laminated with fiberglass + ETFE + Silicon cell + EVA + Tedlar Solar cells: PERC 9BB Monocrystalline Dimensions: 1090x590x2.5mm Net Weight: 2.2kgs Back sheet: Black Fiberglass J-Box: IP 68 rated with 90cm/3ft cables FeaturesSpecifications Electrical Information: Each Panel: Peak power: 140W Solar cell efficiency: 23.5% Maximum power voltage: 22.4V Maximum power current: 6.25A Open circuit voltage: 26.43V Short circuit current: 6.87A Power allowance range: +/-3% Maximum system voltage: 500V Values at standard test conditions: Air Mass - AM1.5, Irradiance - 1000W/m2, Cell Temperature - 25°C Material Information: Laminated for weather resistance Laminated with fiberglass + ETFE + Silicon cell + EVA + Tedlar Solar cells: PERC 9BB Monocrystalline Dimensions: 1510x500x2.5mm Net Weight: 2.6kgs Back sheet: Black Fiberglass J-Box: IP 68 rated with 90cm/3ft cables

Designed for reliable protection against overloads and short circuits, this 20A inline fuse connects directly between solar panels and regulators. Pre-installed MC4 connectors ensure easy installation, all housed in a durable, weather-resistant casing.

Introducing the VSS System for the Chevy Chevrolet Silverado 2500HD with Scoop (2019-Cuurrent), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  98W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3 year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 98W Maximum Power Voltage (Vmp) 27.84V Open Circuit Voltage (Voc) 32.85V Maximum Power Current (Imp) 3.52A Short Circuit Current (Isc) 3.87A

Introducing the VSS System for the Mitsubishi Triton MV (2025-Current), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  100W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 100W Maximum Power Voltage (Vmp) 21V Open Circuit Voltage (Voc) 24.78V Maximum Power Current (Imp) 4.76A Short Circuit Current (Isc) 5.23A

Introducing the VSS System for the Ford Ranger & Everest (PX1, PX2, PX3 2015-2022), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  115W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 2.5 Hours  Installation Difficulty - ModerateBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 115W (35W + 45W + 35W) Maximum Power Voltage (Vmp) 17V Open Circuit Voltage (Voc) 21V Maximum Power Current (Imp) 6.76A Short Circuit Current (Isc) 7.44A

Introducing the VSS System for the Mazda BT-50, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  98W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 2 Hours  Installation Difficulty - ModerateBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 98W Maximum Power Voltage (Vmp) 18.5V Open Circuit Voltage (Voc) 21V Maximum Power Current (Imp) 5.3A Short Circuit Current (Isc) 5.82A

Introducing the VSS System for the Mazda BT-50 (current model), Ford F-150 (2015-2020), Patrol Y61 (without bonnet scoop), LDV T60 Max (2023-Current) & Porsche Cayenne (2003-2010), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  90W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 90W Maximum Power Voltage (Vmp) 17V Open Circuit Voltage (Voc) 20V Maximum Power Current (Imp) 5.3A Short Circuit Current (Isc) 5.8A

Introducing the VSS System for the  Toyota Hilux (2015-2025), Toyota Fortuner (2015-2025), Toyota Landcruiser 100 series (1998 - 2007), Toyota 4 Runner (2003 – 2021), Nissan NP300 & D23 Navara (excluding PRO4X models) (2015-Current), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  100W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 100W Maximum Power Voltage (Vmp) 21V Open Circuit Voltage (Voc) 24.78V Maximum Power Current (Imp) 4.76A Short Circuit Current (Isc) 5.23A

Pioneer SPH-EVO109DAB 10.1" Wireless AV Receiver with Dolby Atmos® Take your in-car entertainment to the next level with the Pioneer SPH-EVO109DAB, a premium 10.1-inch wireless AV receiver designed to deliver an immersive and connected driving experience. Featuring Dolby Atmos®, Stereo Spatial Sound, advanced Pioneer Auto Tuning and wireless Apple CarPlay® and Android Auto™, this receiver combines impressive sound with a large, easy-to-use display. IMMERSIVE DOLBY ATMOS® SOUND Experience a more immersive listening environment with Dolby Atmos®, delivering multi-dimensional sound that surrounds you while you drive. The SPH-EVO109DAB brings spatial audio into the vehicle without requiring additional speakers, making it possible to enjoy compatible Dolby Atmos® content through your existing vehicle audio system. STEREO SPATIAL SOUND Even when your content isn't available in Dolby Atmos®, Pioneer’s Stereo Spatial Sound technology can analyse standard two-channel stereo audio in real time and expand the soundstage. This creates a wider and more engaging listening experience from conventional stereo sources. PIONEER AUTO TUNING WITH SEAT CALIBRATION Pioneer’s Auto Tuning technology is designed specifically for the acoustic challenges of a vehicle interior. It analyses the cabin and automatically adjusts timing, volume and frequency response to optimise the soundstage around your selected seating position. 10.1" HD FLOATING DISPLAY The large 10.1-inch 720p HD capacitive touchscreen provides a bright, clear and easy-to-read interface with a wide viewing angle. Its floating and separable design allows for flexible installation, with horizontal, vertical and tilt adjustment when used as a floating display. WIRELESS APPLE CARPLAY® & ANDROID AUTO™ Connect your compatible smartphone wirelessly or via USB and access your favourite navigation, music, communication and other compatible apps directly from the receiver. Apple CarPlay® and Android Auto™ provide a convenient way to stay connected while keeping essential controls accessible from the vehicle's touchscreen. APPLE CARPLAY® SPLIT SCREEN The Split Screen function allows Apple CarPlay® and the receiver’s menu to be displayed at the same time. This makes it easier to keep navigation visible while controlling functions such as music, radio or USB playback. LUMINOUS BAR The integrated Luminous Bar adds a distinctive visual element to the receiver while providing useful driving information. It can offer turn guidance support with select navigation apps, provide customisable ambient lighting and indicate when your smartphone’s voice assistant has been activated. iDATALINK® MAESTRO™ COMPATIBILITY When paired with a compatible iDatalink® Maestro™ RR or RR2 interface, the SPH-EVO109DAB can integrate with selected factory vehicle features. Supported functions can include steering wheel controls, hands-free telephone, voice commands, factory media controls, visual parking assistance, HVAC information and multi-camera control, depending on vehicle compatibility. PREMIUM SOUND PROCESSING The SPH-EVO109DAB is equipped with a high-performance 48-bit dual-core DSP, premium audio components, Advanced Sound Retriever and time alignment technology. Together, these features provide detailed sound processing and greater control over your in-car audio experience. FLOATING & SEPARABLE DESIGN Built around a universal 1-DIN chassis, the receiver features a large 10.1-inch display that can be configured as a floating mount for a wide range of vehicles or installed as an in-dash flush mount in selected compatible applications. The floating display can be adjusted horizontally, vertically and by tilt to achieve a suitable viewing position. ADDITIONAL CONNECTIVITY & ENTERTAINMENT Dolby Atmos® Stereo Spatial Sound Wireless and wired Apple CarPlay® Wireless and wired Android Auto™ 10.1-inch 720p HD capacitive touchscreen Pioneer Auto Tuning with Seat Calibration iDatalink® Maestro™ compatibility DAB+ digital radio AM/FM radio Bluetooth® dual-phone connectivity WebLink® 3.0 and WebLink® Cast Spotify® via Apple CarPlay® and Android Auto™ Full HD video playback from USB PxLink smartphone app support KEY FEATURES 10.1-inch 720p HD capacitive floating touchscreen 1-DIN chassis with floating/separable display design Dolby Atmos® immersive audio Stereo Spatial Sound processing Pioneer Auto Tuning with Seat Calibration Wireless and wired Apple CarPlay® Wireless and wired Android Auto™ 48-bit dual-core DSP DAB+ digital radio tuner AM/FM radio tuner Luminous Bar iDatalink® Maestro™ compatible Dual camera inputs The Pioneer SPH-EVO109DAB combines immersive audio technology, flexible connectivity and a versatile large-format display in a premium 1-DIN multimedia receiver. With Dolby Atmos®, advanced sound tuning, smartphone integration and a flexible floating screen design, it is an ideal upgrade for drivers looking for a more advanced in-car entertainment experience. Note: Some features require compatible smartphones, applications, accessories or vehicle-specific interfaces. iDatalink® Maestro™ interface modules are sold separately, and compatibility varies by vehicle. ```

Toyota HiLux N90 Gen 9 2025 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3803 Suits Toyota HiLux N90 Gen 9 2025 on Colour Chrome Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility BSM – Blind Spot Monitoring to alert you to vehicles beside you Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Toyota HiLux N90 Gen 9 2025 on Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3803 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota HiLux N90 Gen 9 2025 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3851 Suits Toyota HiLux N90 Gen 9 2025 on Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information This mirror ONLY suits the Double-Cab Pickup (with factory tub) SR, SR5, SR5+, Rogue and Rugged X vehicles with an automatic transmission. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota HiLux N90 Gen 9 2025 on Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3851 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota HiLux N90 Gen 9 2025 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3850 Suits Toyota HiLux N90 Gen 9 2025 on Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Indicators – Integrated indicators for improved road visibility Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information This mirror ONLY suits the Double-Cab Pickup (with factory tub) SR, SR5, SR5+, Rogue and Rugged X vehicles with an automatic transmission. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota HiLux N90 Gen 9 2025 on Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3850 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota Tundra 2024 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3251 Suits Toyota Tundra 2024 on Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Memory – Memory function recalls your preferred mirror position Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information Note: MSA Tundra Mirrors do not include indicators as they are not required for this application. The factory Tundra mirrors have indicators; however, when imported, a CAT 6 indicator is installed in the fender, disabling the mirror indicator. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota Tundra & 2024 on Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3251 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota Tundra & 2024 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3250 Suits Toyota Tundra 2024 on Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Memory – Memory function recalls your preferred mirror position Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information Note: MSA Tundra Mirrors do not include indicators as they are not required for this application. The factory Tundra mirrors have indicators; however, when imported, a CAT 6 indicator is installed in the fender, disabling the mirror indicator. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota Tundra & 2024 on Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3250 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Protect your valuable cargo with the BAK® Revolver X4s Tonneau Cover. The latest iteration of this popular cover offers several upgrades, including full matte-black styling that extends to all components, enhancing its sleek and stealthy appearance. Constructed with durable marine-grade vinyl atop interlocking aluminum slats, the Revolver X4s now boasts improved weather resistance with an integrated bulkhead seal, flat side rail seals, and redesigned rear corner caps, ensuring the flattest and most weather-resistant Ute bed cover on the market. Patented rotational locking rails and an intuitive locking mechanism allow for one-handed operation and enhanced security, preventing unauthorized access. Installation is quick and easy with BAK’s no-drill, clamp-on mounting system. As a RealTruck® brand, BAK offers a 5-year warranty on the Revolver X4s, ensuring long-lasting protection for your Ute. Important: The BAK® Revolver X4s Tonneau Cover is not compatible with Utes equipped with sports bars.

Protect your valuable cargo with the BAK® Revolver X4s Tonneau Cover. The latest iteration of this popular cover offers several upgrades, including full matte-black styling that extends to all components, enhancing its sleek and stealthy appearance. Constructed with durable marine-grade vinyl atop interlocking aluminum slats, the Revolver X4s now boasts improved weather resistance with an integrated bulkhead seal, flat side rail seals, and redesigned rear corner caps, ensuring the flattest and most weather-resistant Ute bed cover on the market. Patented rotational locking rails and an intuitive locking mechanism allow for one-handed operation and enhanced security, preventing unauthorized access. Installation is quick and easy with BAK’s no-drill, clamp-on mounting system. As a RealTruck® brand, BAK offers a 5-year warranty on the Revolver X4s, ensuring long-lasting protection for your Ute. Important: The BAK® Revolver X4s Tonneau Cover is not compatible with Utes equipped with sports bars.

Protect your valuable cargo with the BAK® Revolver X4s Tonneau Cover. The latest iteration of this popular cover offers several upgrades, including full matte-black styling that extends to all components, enhancing its sleek and stealthy appearance. Constructed with durable marine-grade vinyl atop interlocking aluminum slats, the Revolver X4s now boasts improved weather resistance with an integrated bulkhead seal, flat side rail seals, and redesigned rear corner caps, ensuring the flattest and most weather-resistant Ute bed cover on the market. Patented rotational locking rails and an intuitive locking mechanism allow for one-handed operation and enhanced security, preventing unauthorized access. Installation is quick and easy with BAK’s no-drill, clamp-on mounting system. As a RealTruck® brand, BAK offers a 5-year warranty on the Revolver X4s, ensuring long-lasting protection for your Ute. Important: The BAK® Revolver X4s Tonneau Cover is not compatible with Utes equipped with sports bars or Sail plane.

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

Protect your valuable cargo with the BAK® Revolver X4s Tonneau Cover. The latest iteration of this popular cover offers several upgrades, including full matte-black styling that extends to all components, enhancing its sleek and stealthy appearance. Constructed with durable marine-grade vinyl atop interlocking aluminum slats, the Revolver X4s now boasts improved weather resistance with an integrated bulkhead seal, flat side rail seals, and redesigned rear corner caps, ensuring the flattest and most weather-resistant Ute bed cover on the market. Patented rotational locking rails and an intuitive locking mechanism allow for one-handed operation and enhanced security, preventing unauthorized access. Installation is quick and easy with BAK’s no-drill, clamp-on mounting system. As a RealTruck® brand, BAK offers a 5-year warranty on the Revolver X4s, ensuring long-lasting protection for your Ute. Important: The BAK® Revolver X4s Tonneau Cover is not compatible with Utes equipped with sports bars.

Protect your valuable cargo with the BAK® Revolver X4s Tonneau Cover. The latest iteration of this popular cover offers several upgrades, including full matte-black styling that extends to all components, enhancing its sleek and stealthy appearance. Constructed with durable marine-grade vinyl atop interlocking aluminum slats, the Revolver X4s now boasts improved weather resistance with an integrated bulkhead seal, flat side rail seals, and redesigned rear corner caps, ensuring the flattest and most weather-resistant Ute bed cover on the market. Patented rotational locking rails and an intuitive locking mechanism allow for one-handed operation and enhanced security, preventing unauthorized access. Installation is quick and easy with BAK’s no-drill, clamp-on mounting system. As a RealTruck® brand, BAK offers a 5-year warranty on the Revolver X4s, ensuring long-lasting protection for your Ute. Important: The BAK® Revolver X4s Tonneau Cover is not compatible with Utes equipped with sports bars.

Protect your valuable cargo with the BAK® Revolver X4s Tonneau Cover. The latest iteration of this popular cover offers several upgrades, including full matte-black styling that extends to all components, enhancing its sleek and stealthy appearance. Constructed with durable marine-grade vinyl atop interlocking aluminum slats, the Revolver X4s now boasts improved weather resistance with an integrated bulkhead seal, flat side rail seals, and redesigned rear corner caps, ensuring the flattest and most weather-resistant Ute bed cover on the market. Patented rotational locking rails and an intuitive locking mechanism allow for one-handed operation and enhanced security, preventing unauthorized access. Installation is quick and easy with BAK’s no-drill, clamp-on mounting system. As a RealTruck® brand, BAK offers a 5-year warranty on the Revolver X4s, ensuring long-lasting protection for your Ute. Important: The BAK® Revolver X4s Tonneau Cover is not compatible with Utes equipped with sports bars.

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

Built for workdays, weekends, and everything in between, the BAKFlip MX4 TS is a premium hard folding tonneau cover designed for ute owners who need protection and added carrying capability. Tough, secure, and rack-ready, it’s made to handle the demands of the Australian lifestyle. The MX4 TS features durable aluminium panels with a refined matte black finish, engineered to withstand harsh sun, heavy rain, dust, and rough terrain. Its ultra-low-profile, flush-mount design sits seamlessly on the tub, delivering a clean factory-style look without sacrificing strength. What sets the MX4 TS apart is its integrated T-Slot rail system, allowing you to mount compatible racks and accessories directly to the cover, perfect for carrying bikes, ladders, or camping gear. When you need full tub access, the tri-fold design opens in seconds, making it easy to transport larger cargo. With added security features like automatic locking panels and an enhanced dual-action tailgate seal, your cargo stays protected from both theft and the elements wherever your journey takes you.   Please note: The BAKFlip MX4 TS is not compatible with sports bars.

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

The BedRug Classic Bed Liner is a full bed liner designed to protect your ute’s tub from wear, scratches and impact damage without adding unnecessary weight or making the surface uncomfortable to use. It covers the entire tub floor and walls with a soft feeling yet tough material that resists water, chemicals and abrasion. Made from 100% polypropylene, the BedRug liner feels more like carpet underfoot but is engineered to handle heavy use and harsh conditions. It won’t absorb water, so moisture doesn’t get trapped underneath, and it’s mould, mildew and stain resistant. The non skid surface helps keep items from sliding around in the tub and is cushioned for easier kneeling or loading gear.  The liner is shaped to match your specific ute model, and it is designed so factory tie downs and other tub accessory points stay reachable and usable after installation. This means you can still secure cargo to existing hooks and loops without cutting or modifying the liner. Installation uses a hook and loop system and basic tools, with no drilling or permanent modifications needed. The liner is shaped to fit specific ute models to maintain access to tie downs and other factory features. Because it sits flush against the tub and walls, it works with tonneau covers and other tub accessories without interfering with their operation. 

Built for workdays, weekends, and everything in between, the BAKFlip MX4 TS is a premium hard folding tonneau cover designed for ute owners who need protection and added carrying capability. Tough, secure, and rack-ready, it’s made to handle the demands of the Australian lifestyle. The MX4 TS features durable aluminium panels with a refined matte black finish, engineered to withstand harsh sun, heavy rain, dust, and rough terrain. Its ultra-low-profile, flush-mount design sits seamlessly on the tub, delivering a clean factory-style look without sacrificing strength. What sets the MX4 TS apart is its integrated T-Slot rail system, allowing you to mount compatible racks and accessories directly to the cover, perfect for carrying bikes, ladders, or camping gear. When you need full tub access, the tri-fold design opens in seconds, making it easy to transport larger cargo. With added security features like automatic locking panels and an enhanced dual-action tailgate seal, your cargo stays protected from both theft and the elements wherever your journey takes you.   Please note: The BAKFlip MX4 TS is not compatible with sports bars.

Built for workdays, weekends, and everything in between, the BAKFlip MX4 TS is a premium hard folding tonneau cover designed for ute owners who need protection and added carrying capability. Tough, secure, and rack-ready, it’s made to handle the demands of the Australian lifestyle. The MX4 TS features durable aluminium panels with a refined matte black finish, engineered to withstand harsh sun, heavy rain, dust, and rough terrain. Its ultra-low-profile, flush-mount design sits seamlessly on the tub, delivering a clean factory-style look without sacrificing strength. What sets the MX4 TS apart is its integrated T-Slot rail system, allowing you to mount compatible racks and accessories directly to the cover, perfect for carrying bikes, ladders, or camping gear. When you need full tub access, the tri-fold design opens in seconds, making it easy to transport larger cargo. With added security features like automatic locking panels and an enhanced dual-action tailgate seal, your cargo stays protected from both theft and the elements wherever your journey takes you.   Please note: The BAKFlip MX4 TS is not compatible with sports bars.