FRONT RUNNER Rack Adaptor Plates For Thule Slotted Load Bars...
$107.10
$119.00
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
Steel.
Black powder coated.
Mounts onto individual slats via the T-slot system.
T-slot bolts included.
Pre-cut fitment holes.
Features
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") high strength steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 290mm (11.42") x W 74mm (2.91") x H 27mm (1.06")
Weight:
2kg (4.4lbs)
FRONT RUNNER Quick Release Awning Mount Kit - RRAC222
$162.00
$180.00
Once these brackets are installed on a Front Runner Rack, no additional tools are needed to remove or refit the awning.
Simply release the 2 latches and lift the awning away in seconds.
No more wrenching in tight spaces during the off-season or time-consuming weekday removal of the awning.
This strong and "rattle-free" mounting system is built off-road tough for use with Front Runner Racks.
Works with all Front Runner Awnings and other popular awning brands like Eezi-Awn, Oz Tent, etc.
2 low profile base brackets are bolted to a Front Runner Rack while 2 self-aligning bushes are secured to the awnings mounting channel using the supplied fasteners.
Safely secured in place using 2 latches with built-in safety catch. For added peace of mind, lock your latches in place using Rack Accessory Lock / Small.
The brackets are small, unobtrusive and can be left on the roof rack when the awning is not mounted.
No awning modification required.
Removed awnings can be stored using the wall mount brackets supplied.
Supplied with all required mounting hardware.
Fitting instructions are included.
Weight limit: 20kg (44.1lbs).
Note: Not suitable for 270 degree awnings.
Features
Consists of:
1 x Pair of Quick Release Awning Brackets
Installation Hardware
Fitting instructions
Materials used:
Black powder coated Steel
Product Dimensions: (Per Single Bracket)
161.5mm(6.4") L x 103mm (4.1") W x 100mm (3.9") H
Weight:
2kg (4.4lbs)
FRONT RUNNER Pro Thru Axle Bike Carrier / Power Edition...
$115.20
$128.00
Designed to mount bikes with 100/110mm x 12mm, 100/110mm x 15mm, and 110/110mm x 20mm thru-axles (Boost)
Compatible with pinch style forks such as Fox40, Manitou Dorado and Marzocchi 380
Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires.
Rear wheel holder features a ratchet buckle and strap that allows fast adjustment
Works with Front Runner Racks and Load Bars
Made from steel and aluminum and powder-coated for durability and longevity
Note: Installation requires a minimum rack length of 1156mm (six slats).
Features
Consists of:
1 x Front Fork Mount
1 x Rear Wheel Mount
1 x Pair of inserts for 12mm 100/110 Thru Axle
1 x Pair of Inserts for 15mm 100/110 Thru Axle
1 x Pair of inserts for 20mm 100/110 Thru Axle
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Black powder coated aluminum
Product Dimensions:
300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H
Weight:
1.5kg (3.3lbs)
FRONT RUNNER Pro Surfboard, Windsurf And Paddle Board Carrier -...
$280.80
$312.00
Made of stainless steel and sealed with the same durable, weather rated powder coating as the Front Runner Slimline Roof Racks.
The ultra dense yet soft weather resistant rubber pads cradle your valuable gear without harming or scratching the surfaces.
The Stratchit straps clever cinching system mean easy-on and easy-off secure transport every time.
Adjustable to hold all shapes and lengths of boards across the width and length of Front Runner Slimline Roof Racks or Front Runner Load Bars.
Each Front Runner Board Carrier can hold 1 to 2 boards.
Most Front Runner Roof Racks and Load Bar widths will accommodate a 2nd Front Runner Board Carrier to hold up to 4 boards.
Includes:
2 pairs of board holders
1 pair of Front Runner Stratchits
All hardware necessary to mount to a Slimline Roof Rack, Load Bars, or other flat surface.
Installation Manual
Made in South Africa
Features
Consists of:
2x Brackets
2x Stratchit Strap
Bolt Kit
Materials used:
Black powder-coated Steel
Polyethylene pads
Product dimensions:
L 276mm (10.9") x W 76mm (3") x H 67mm (2.6")
Weight:
Individual bracket: 0.6kg (1.3lbs)
Entire kit: 2.9kg (6.4lbs)
FRONT RUNNER Pro Stainless Steel Table Under Rack Bracket -...
$162.00
$180.00
These brackets have been designed to work in conjunction with the Pro Stainless Steel Camp Table, the Pro Stainless Steel Prep Table and Under-Rack Table Latch - by Front Runner to make taking a sturdy table along with you on your travels as simple and effortless as possible.
Pro Stainless Steel Table Under Rack Bracket - by Front Runner:
A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Camp/Prep Table or Pro Stainless Steel Prep Table with Basin - by Front Runner.
The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the option to access to the table from either the side or rear of the vehicle.
Easy installation.
Made of steel that is black powder coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
Under-Rack Table Slides Latch - by Front Runner:
Keeps the Pro Stainless Steel Camp/Prep Table or Pro Stainless Steel Prep Table with Basin - by Front Runner securely stored in the Under-Rack Table Brackets - by Front Runner.
Secured to the top of the Slimline II rack using the T-slot and clamps over the lip of the table to keep it in place.
A rubber insert prevents rattling and damage to the table.
Spring loaded for ease of use.
Lockable for added security.
Made of steel that is black powder coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.
Features
Consists of:
1 x Pair of Storage Slides
1 x Table Latch
Installation Hardware
Materials used:
Black powder-coated Steel
PVC Grommet
Product Dimensions:
881mm (34.7")L x 187mm (7.4")W x 46mm (1.8")H
Weight:
2.4kg (5.3lbs)
TABLE CARE:
Keep your table clean and sparkling with these easy care instructions.
Add a small amount of dish soap to a damp soft cloth.
Wipe the table along the grain of your tabletop.
Dry excess moisture with a dry towel.
Quickly add polish by dabbing on a small amount of mineral or
baby oil, wiping with the grain of the stainless steel.
Done!
FRONT RUNNER Pro Fork Mount Bike Carrier / Power Edition...
$122.40
$136.00
Upright bike carrier, made from strong steel and aluminum.
Powder-coated in the same durable finish as the Front Runner rack and load bars for durability.
Front fork clamp features a quick release that fits all standard fork dropouts.
Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires.
Quickly secure and adjust the rear wheel with the robust ratcheting buckle and strap.
Note: Fitment to a rack requires a minimum rack length of 1156mm (6 slats).
Note: This solution is not compatible with Boost Hubs/Forks.
Features
Consists of:
1 x Fork Clamp
1 x Rear Wheel Holder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel & aluminum
Rubber ladder strap
Plastic ratchet buckle
Overall Product Dimensions:
300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H
Rear Holder:
230mm (9.1") L x 176mm (6.9") W x 81mm (3.2") H
Front Clamp:
70mm (2.8") L x 152mm (6") W x 114mm (4.5") H
Weight:
1.6kg (3.5lbs)
FRONT RUNNER Pro Canoe / Kayak / Sup Carrier -...
$652.50
$725.00
Fits most size canoes, kayaks, SUPs and surf skis. The space between the brackets is only limited by the length of your Front Runner Roof Rack or distance between your Load Bars.
Highly adjustable brackets allow for multiple mounting angles for your canoe, kayak or SUP.
The foam-padded holders are self-adjusting for the perfect fit to the hull of your boat.
The dense weather-resistant open cell foam pads are covered with a water-repellent polyester cover that is UV stabilized to prevent fading.
Pads can be easily replaced if damaged in any way.
Toys are secured to the Canoe / Kayak / SUP Carrier using the supplied Front Runner Stratchits straps and eye nuts.
The included Front Runner adjustable and stretchable Stratchits are the perfect tie-down for serious cargo.
The quick and efficient straps will keep loads stable and secure without damaging surfaces and are rated up to 300 lbs.
The Stratchit's clever cinching system creates an easy-on, and easy-off, secure transport every time.
Complete kit includes everything necessary to secure your water toys to Front Runner Roof Racks or Load Bars.
Weight limit: 60kg (132 lbs).
Features
Consists of:
2 x Adjustable Holders
4 x Pads
1 x Pair of Stratchits
4 x Eye nuts
Installation Hardware
Fitting Instructions
Materials used:
Adjustable Holders:
Black powder coated steel
EPE (Expandable Polyethylene) foam Pads:
100% UV protected polyester outer shell
100% polyester lining
Product Dimensions (fully opened):
700mm (27.6") L x 75mm (3") W x 112mm (4.4") H (Single Holder)
Weight:
6.2kg (13.7lbs) (Holder Set)
FRONT RUNNER Pro Bike Carrier - RRAC148
$819.00
$910.00
Easily install onto your Front Runner Rack in minutes.
No front wheel removal necessary.
Suitable for all bike sizes; all frame styles including composite carbon frames; all thru axle and brake configurations as well as Lefty forks and full suspension bikes.
Front wheel holder is easily adjusted and holds the bike steady while the rear Wheel Holder is secured.
Adjustable to secure most wheel diameters including road bikes, MTB and fat bikes with tire widths ranging from 18mm/0.7" up to 132mm/5.2".
The carrier folds flat and secures onto your rack when not in use.
Bike can be locked using Rack Accessory Lock / Large.
Constructed with same weather resistant stainless steel and powder coating as the Front Runner racks and mounting systems.
Features
Consists of:
1 x Bike Carrier
1 x Bike Carrier Rack Clamp
1 x Rear Wheel Holder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Plastic
Product Dimensions:
Bike Carrier (Closed):
825mm (32.5") L x 205mm (8.1") W x 100mm (3.9") H
Rear Wheel Holder:
230mm (9.1") L x 170mm (6.7") W x 70mm (2.8") H
Weight:
9.4kg(20.7lbs)
Special Notes:
Suitable for all bike sizes incl. Fat Bikes
FRONT RUNNER Pro Bed Water Kit / 20L - PBAC011
$350.10
$389.00
Water must be easily accessible when on the road in your rig. That is exactly what the lockable Pro Bed Water Kit offers, as it attaches to the side of your Pro Bed System, 20 litres of water at your disposal.
This Pro Bed Water Kit / 20L bolts on the side of the Pro Bed System.
Install this mount onto your Pro Bed System to allow quick and easy access to your 20L Pro Water Tank.
Easily remove your water tank by loosening the stainless-steel eye nuts.
The water tank can be locked for added peace of mind using the Rack Accessory Lock / Small (sold separately).
Plastic alignment spacers protect, align and secure your water tank.
Mounting holes could be used mount other accessories to your Pro Bed System or Pro Bed Rack Kit.
As a recovery solution, the Pro Bed Recovery Bracket is available.
Made of high strength steel and coated in the same durable, weather-resistant black powder coating as the Front Runner Rack.
Features
Consists of:
1 x Pro Bed Universal Accessory Mount
1 x Universal Side Mount for Pro Water Tank / 20L
1 x Pro Water Tank With Tap / 20L
Installation Hardware
Fitment Guide
Materials used:
Black powder coated steel
Food grade BPA free polyethylene Water Tank
Assembled Product Dimensions:
470mm (18.5") L x 224mm (8.8") W x 490mm (19.3") H
Weight:
6.82kg (15lbs)
FRONT RUNNER Pro Bed Rack Side Molle Panel / 1400Mm...
$150.30
$167.00
Add this strong, steel Side Molle Panel to make your Pro Bed Rack even more versatile. This 1400mm/55.1" long, Molle Panel easily slides into the side extrusions to create that extra storage space we all need. A great place to put gear you might need in a hurry.
This Pro Bed Rack Side Molle Panel creates even more storage space to attach various accessories to the outside of the bed rack for easy access.
It fits onto the sides of the Pro Bed Rack by sliding into the side extrusions. No drilling is required.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
Features
Consists of:
4 x Molle Panel
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1400mm (55.12") L x 30mm (1.18") W x 496mm (19.53") H
Weight:
9.2kg (20.3lbs)
FRONT RUNNER Pro Bed Recovery Bracket - PBAC010
$154.80
$172.00
When stuck, you want quick access to your recovery boards. This is exactly what the Pro Bed Recovery Bracket offers, allowing you to conveniently attach your MAXTRAX, Tred Pro or Tred GT to the Pro Bed System.
This Pro Bed Recovery Bracket bolts on the top and bottom side of the Pro Bed System.
To attach your MAXTRAX, use the included Pro Bed Recovery Device Mounting Hardware or MAXTRAX Mounting Pin Set * Sold Separately.
The included Pro Bed Recovery Device Mounting Hardware can be used to mount your Tred Pro and Tred GT Recovery Boards.
Mounting holes could be used mount other accessories to your Pro Bed System or Pro Bed Rack Kit.
As a universal solution, the Pro Bed Universal Accessory Mount is available.
For a complete water solution, Front Runner offers the Pro Bed Water Kit / 20L.
Made of high strength steel and coated in the same durable, weather-resistant black powder coating as the Front Runner Rack.
Features
Consists of:
1 x Pro Bed Universal Accessory Mount
1 x Pro Bed Recovery Device Mounting Hardware
Installation Hardware
Fitment Guide
Materials used:
Black powder coated steel
Product Dimensions:
490mm (19.3") L x 200mm (7.9") W x 30mm (1.9") H (Per Single Bracket)
Weight:
3.28kg (7.2lbs)
FRONT RUNNER Pro Bed Rack Side Molle Panel / 1200Mm...
$135.00
$150.00
Add this strong, steel Side Molle Panel to make your Pro Bed Rack even more versatile. This 1200mm/47.2" long, Molle Panel easily slides into the side extrusions to create that extra storage space we all need. A great place to put gear you might need in a hurry.
This Pro Bed Rack Side Molle Panel creates even more storage space to attach various accessories to the outside of the bed rack for easy access.
It fits onto the sides of the Pro Bed Rack by sliding into the side extrusions. No drilling is required.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
Features
Consists of:
4 x Molle Panel
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1200mm (47.2") L x 30mm (1.18") W x 496mm (19.53") H
Weight:
7.7kg (17lbs)
FRONT RUNNER Potjie Pot/Dutch Oven Carrier - RRAC062
$110.70
$123.00
Create deliciously hearty meals out in the wilderness, fit for the avid explorer and overlanding veterans alike.
The Front Runner Potjie Pot/Dutch Oven Carrier is a safe and durable means of transporting your potjie pot/dutch oven where ever your travels may take you.
The potjie pot/dutch oven is placed centrally into the bracket with the three legs fitting into the holes in the three protrusions extending from the centre of the bracket. The supplied ratchet strap threads through the lid of the pot and fixes to pre-drilled points on the bracket.
Made of corrosion resistant steel and black powder-coated with an industry preferred, outdoor rated coating.
Features
Consists of:
Potjie bracket for No 2 & No 3 pot
Ratchet strap
Mounting hardware
Materials used:
Black powder-coated steel
Product Dimensions:
276mm (10.9") L x 229mm (9") W x 133mm (5.2") H
Weight:
2kg (4.4lbs)
FRONT RUNNER Potjie Pot/Dutch Oven And Carrier - RRAC081
$316.80
$352.00
Theres no better place to keep potentially hot, grimy, dirty, and cumbersome camp kitchen supplies than up and out of the way, outside the vehicle.
The Front Runner Potjie Pot Carrier offers a sensible way to travel with a potjie pot.
The potjie pot is secured in the bracket by the three legs. The supplied ratchet strap threads through the lid of the pot and fixes points on the bracket.
The #3 cast iron pot holds 7.8L / 2.1 Gallons. The round shape and cast iron allows the heat to flow evenly around the sides and maintain liquids at the lowest point to keep them from burning. The lid has a deep lip for holding hot coals.
The high strength steel carrier is finished with the same durable, weather resistant powder coating as the Front Runner Slimline II Rack.
Like all Front Runner rack accessories, the installation is simple. Just slide the bolts into the t-slots of any Front Runner Rack Tray, set down the carrier, then add nuts and tighten.
Features
Consists of:
Rack mounted bracket
Strap guide
Ratchet strap
mounting hardware
No 3 cast iron pot
Materials used:
Black powder-coated high strength steel
Nylon strap
Cast iron pot
Product Dimensions:
280mm (11") W x 280mm (11") D x 343mm (13.5") H
Pot Specifications:
No. 3 potjie Pot - 7.8l (2.1gal) capacity
Max outer diameter: 290mm (11.4")
Height: 300mm (11.8")
Lid max outer diameter: 260mm (10.2")
Total Weight:
11.25kg (24.9lbs)
FRONT RUNNER Pickup Load Bed 5.5' Canopy/Cap/Trailer Slimsport Rack Kit...
$867.60
$964.00
This Slimsport Kit is suited for truck canopies/camper shells/caps.
This low profile flat deck Slimsport rack has a load carrying area of 1350mm (53.1") x 1211mm (47.7").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner (sold separately) for all Front Runner side mount accessories.
Fitment guide and all mounting hardware included.
Note: Drilling required.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
Features
KSCA001 - Pickup Load Bed 5.5'Canopy/Cap/Trailer Slimsport Rack Kit
Consisting of:
1 x Pickup Load Bed 5.5'Canopy/Cap/Trailer Slimsport Tray
1 x Installation Hardware
1 x Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1350mm (53.1") L x 1211mm (47.7") W x 63mm (2.5") H
Approximate Installed Weight: 16.99kg (37.46lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 240mm (9")
Length: 1560mm (61")
Height: 100mm (4")
Shipping Weight:
Weight: 17.17kg (38lbs)
FRONT RUNNER Peugeot Boxer (L4H2/159In Wb/High Roof) (2014-Current) Slimpro Van...
$2,837.70
$3,153.00
Compatible with Peugeot Boxer (L4H2/159" WB) (2014-Current) high roof vans with a vehicle length of 6363mm / 250.5".
Load-carrying area: 3928mm (154.6") x 1565mm (61.6").
Ten (10) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVPB005T - Peugeot Boxer (L4H2/159" WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
5x FAVF002 - FPCR Foot Set - by Front Runner
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
5x RRNS1475 - Narrow Slat / 1475mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
2x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
3928mm (154.6") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 42.17kg (92.97lbs)
Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 43.35kg (95lbs)
FRONT RUNNER Peugeot Boxer (L2H2/136In Wb/High Roof) (2014-Current) Slimpro Van...
$2,173.50
$2,415.00
Compatible with Peugeot Boxer (L2H2/136" WB) (2014-Current) High roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVPB003T - Peugeot Boxer (L2H2/136" WB/High Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF002 - FPCR Foot Set - by Front Runner
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1475 - Narrow Slat / 1475mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 37.35kg (82lbs)
FRONT RUNNER Peugeot Boxer (L2H1/136In Wb/Low Roof) (2014-Current) Slimpro Van...
$2,173.50
$2,415.00
Compatible with Peugeot Boxer (L2H1/136" WB) 2014-Current low roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVPB002T - Peugeot Boxer (L2H1/136" WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF002 - FPCR Foot Set - by Front Runner
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1475 - Narrow Slat / 1475mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 31.49kg (69.42lbs)
Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 37.35kg (82lbs)
FRONT RUNNER Peugeot Boxer (L1H1/118In Wb/Low Roof) (2014-Current) Slimpro Van...
$2,101.50
$2,335.00
Compatible with Peugeot Boxer (L1H1/118" WB) (2014-Current) low roof vans with a vehicle length of 4963mm / 195.4".
Load-carrying area: 2570mm (101.2") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVPB001T - Peugeot Boxer (L1H1/118" WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF002 - FPCR Foot Set - by Front Runner
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1475 - Narrow Slat / 1475mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2570mm (101.2") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 30.99kg (68.32lbs)
Peugeot Boxer Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 35.35kg (78lbs)
FRONT RUNNER Narrow Wind Faring For Rack / 1165Mm/1255Mm(W) -...
$219.60
$244.00
To reduce roof rack wind noise and aid the efficient air movement over your rack.. The quick-to-fit Narrow Wind Fairing for Rack will do just that and fits the 1165mm and 1255mm wide trays.
A wind fairing for the narrow 1165mm and 1255mm trays.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. A protective vinyl strip is included to protect vehicle paint.
Brackets and installation hardware included.
Features
Consists of:
1 x Low Profile Wind Fairing
1 x Protection Strip
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
87mm (3.4") L x 950mm (37.4") W x 200mm (7.9") H
Weight:
1.53kg (3.4lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
