FRONT RUNNER Ute Stainless Steel Water Tank For Drawer System...
$2,462.40
$2,736.00
This 2772mm/109.1" long, full-size, Slimline II cargo carrying roof rack kit for the Volkswagen T5/T6 Transporter LWB contains a Slimline II Tray, Wind Deflector, and 8 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This Kit required the OEM tracks for installation.
Features
KRVT015T - Volkswagen T5/T6 Transporter LWB w/OEM Tracks (2003-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4x FASS017 - Foot Set / 75mm-85mm1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.84kg (92.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 230mm (9")
Shipping Weight:
Weight: 47.6kg (105lbs)
FRONT RUNNER Volkswagen Crafter (L5H2/ Lwb Maxi/Oem Track) (2017-Current) Slimpro...
$3,022.20
$3,358.00
Revitalize your Volkswagen Crafter van's carrying potential with this sturdy roof rack kit. Whether you're setting off on a grand van-life adventure, escaping for the weekend, or transporting essential equipment, this streamlined heavy-duty rack is designed to shoulder sizeable loads. The Slimpro Van Rack is equipped to effortlessly handle your gear and facilitate the seamless mounting of Front Runner accessories in various setups.
Compatible with the Volkswagen Crafter (L5H2/ LWB Maxi/OEM Track) (2017-Current) vans with an OEM Track with a vehicle length of 7391mm / 291".
Load-carrying area: 4534mm (178.5") x 1456mm (57.3").
Fourteen (14) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 116mm (4.6") height, or left in standard configuration at 158mm (6.2").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVVC006T - Volkswagen Crafter (L5H2/ LWB Maxi/OEM Track) (2017-Current) Slimpro Van Rack Kit
Consisting of:
7x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
6x RRNS1345 - Narrow Slat / 1345mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
2x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
4535mm (178.5") L x 1455mm (57.3") W x 132mm (5.2") H
Approximate Installed Weight: 45.98kg (101.37lbs)
Volkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 53kg (117lbs)
FRONT RUNNER Vertical Surfboard Carrier - RRAC095
$414.90
$461.00
These two movable holders securely clamp your surfboard in-place vertically on either side of a Front Runner Slimline II Rack for easy transportation to free up room for other gear like Roof Top Tents, Kayaks, bikes, water and fuel, etc.
Adjust the holders along the length of the rack to accommodate various size boards.
2 supplied Front Runner Stratchits hold the Surfboard snug against padded side rests. The Stratchit straps clever cinching system provide easy-on and easy-off secure transport every time.
The vertical holders can be folded down and stored flat against the rack top.
If space on the rack top is available, the holders can be used in their flat “horizontal” positions to mount a surfboard or other larger boards for SUP or wind surfing.
Each vertical holder and side rest has soft touch foam padding to cradle your valuable gear without harming or scratching the surfaces. The Soft touch pads are made from a weather resistant cross-linked, closed cell Polyethylene.
Included rubber pads provide further protection between your board and the Front Runner Stratchit straps.
The brackets are made from steel and sealed with the same durable, weather resistant black powder coating as the Front Runner Slimline II Roof Racks.
In the vertical position the holders measure 400mm (15.8") high from the underside of the Slimline II Rack Tray. When folded flat in the locked horizontal position the holders measure 45mm high from the underside of the Slimline II Rack Tray.
Can be used with Front Runner Slimline II Roof Racks, Bed Racks and Trailer Racks.
Easily bolts to your Slimline II Rack with supplied hardware.
Includes all necessary installation hardware and fitting instructions.
Consists of:2 x Board Mounting Brackets2 x Slimline II Rack Latch Brackets1 x Pair of Stratchits1 x Pair of Tie Down RingsInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steel304 Stainless SteelFoam PadRubberProduct Dimensions:Outer Dimensions (Single Holder):559mm (22") L x 85.5mm (3.4") W x 98.5mm (3.9") HOpen Dimensions (Single Holder):161mm (6.3") L x 85.5mm (3.4") W x 445mm (17.5") HWeight:3.4kg (7.5lbs)
FRONT RUNNER Toyota Tundra (3Rd Gen) 4 Door Crewmax 5.5'...
$1,348.20
$1,498.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Tundra, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT002S - Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' (2022-Current) Pro Bed System
Consisting of:
1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTT002 - Toyota Tundra (3rd Gen) 4 Door CrewMax 5.5' (2022-
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 54.74kg (120.68lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1490mm (59")
Height: 340mm (13")
Shipping Weight:
Weight: 59kg (130lbs)
FRONT RUNNER Toyota Tacoma 3Rd Gen Double Cab 5' (2016-2023)...
$2,483.10
$2,759.00
Up your Toyota Tacoma's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Toyota. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Toyota Tacoma Double Cab 5' load bed.
Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Toyota Tacoma Double Cab 5' with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT001T - Toyota Tacoma Double Cab 5' (2005-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBTT001S - Toyota Tacoma (2005-Current) Pro Bed Rack S
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 72.23kg (159.24lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1720mm (68")
Height: 510mm (20")
Shipping Weight:
Weight: 81kg (178lbs)
FRONT RUNNER Toyota Tacoma 3Rd Gen Double Cab 5' (2016-2023)...
$1,156.50
$1,285.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Tacoma Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Tacoma Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Tacoma Double Cab with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT001S - Toyota Tacoma Double Cab 5' (2005-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTT001 - Toyota Tacoma Pro Bed Rack Mounting System
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 51.4kg (113.32lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1280mm (50")
Height: 340mm (13")
Shipping Weight:
Weight: 55kg (121lbs)
FRONT RUNNER Toyota Sequoia (2023-Current) Base Deck - SSDS133
$880.20
$978.00
Install the three-piece carpeted seat delete Base Deck and get your Toyota Sequoia primed for all types of gear-carrying duties. You now have a level packing surface, perfect for mounting a Fridge Slide or a stack of secured Wolf Pack Pro storage boxes.
Includes 3 base decks (1 front, 1 middle and 1 rear deck), 6 mounting brackets, installation hardware and fitting instructions.
The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Toyota Sequoia.
The decks are covered with a durable, UV resistant nylon pile carpet.
The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration.
The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow.
Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The 3rd row of seats need to be removed for installation of the base deck.
Features
Consists of:
1 x Rear Deck
1 x Middle Deck
1 x Front Deck
3 x Deck Support
3 x Front Mounting Feet
3 x Rear Mounting Feet
Installation Hardware
Fitting Instructions
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1200mm (47.2") L x 1340mm (52.8") W x 170mm (6.7") H
Weight:
20.23Kg (44.6lbs)
FRONT RUNNER Toyota Hiace Lwb (2019-Current) Slimpro Van Rack Kit...
$2,097.90
$2,331.00
Sick of heading out in your van without enough space for your tools, materials or gear? Then look no further than the super-sleek Toyota HiAce LWB Slimpro Van Kit. It will massively increase your cargo-carrying capacity and can be customized according to your work, adventure or sporting needs.
Compatible with the Toyota HiAce LWB (2019-Current) vans with a vehicle length of 5265mm / 207.3".
Load-carrying area: 2973mm (117") x 1535mm (60.4").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 115mm (4.5") height, or left in standard configuration at 163mm (6.4").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVTH001T - Toyota HiAce LWB (2019-Current) Slimpro Van Rack
Consisting of:
2x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm
2x FAVF006 - Volkswagen Crafter Van Rack Foot Set / 90mm
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
1x RRAC978 - Toyota HiAce LWB(2019-Curr)Slimpro Van Rack Spacer
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT004 - Van Rack Side Profile / 1762mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dims:
2973.8mm (L) x 1535mm (W) x 162.8mm (H)
Approximate Installed Weight: 30.47kg (67.17lbs)
Shipping Dimensions:
Width: 450mm (18")
Length: 1770mm (70")
Height: 185mm (7")
Shipping Weight:
Weight: 38.16kg (84lbs)
FRONT RUNNER Tent Mount Kit / 6 Piece / Tall...
$126.90
$141.00
These 57mm (2.24") roof top tent mounting brackets allow extra clearance along your Front Runner Roof Racks side rails to allow room for certain rack accessories (eg. Awnings).
Made from black powder-coated steel.
All necessary hardware to mount the brackets to the Front Runner Roof Rack is included.
Features
Consists of:
6 x Tent Mount Kit / Tall Brackets
Materials used:
2mm (0.078) Black powder coated steel
Product Dimensions:
245mm (9.6") L x 70mm (2.4") D x 57mm (2.2") H
Weight:
2.25kg (5lbs)
FRONT RUNNER Tap Extension Bracket - RRAC170
$112.50
$125.00
Installs to the side profile of your Slimline II Roof Rack.
Swings out 90 degrees from the side of the rack, allowing your water tap to clear the side of your vehicle.
The spring pin locks the extension bracket in a closed or opened position.
Features a shower head holder.
Used best with Hose Kit For Tap Extension Bracket.
Features
Consists of:
1 x Tap Extension Bracket
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
315mm (12.4") L x 187mm (7.4") W x 73mm (2.9") H
Weight:
1.3kg (2.9lbs)
FRONT RUNNER Suzuki Jimny 3 Door (2018-Current) Rear Window Molle...
$227.70
$253.00
This Jinmy 4 Gen Molle Panel creates much-needed storage space or storage configuration options.
Installation to vehicles without a curtain airbag (South Africa):
Mounts to the rear grab handle and the factory mounting points under the left or right rear window. No drilling is required.
Installation to vehicles with a curtain airbag (EU and AU):
Drilling is required above the rear window and secures to the factory mounting points under the left or right rear window.
Strap your additional supplies and adventure gear to the Molle Panel using the supplied straps, two (2) long and two (2) short adjustable webbing straps included.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
The Molle Panel is compatible with the Suzuki Jimny Internal Storage Shelf to maximize the load solutions.
Features
Consists of:
1 x Molle Panel
2 x Mounting Brackets
2 x Short Molle Panel Straps
2 x Long Molle Panel Straps
Installation Instructions
Fitting Instructions
Materials Used:
Black powder coated high strength steel
Product Dimensions:
Molle Panel Dimensions:
630mm (24.8") W x 3mm (0.1") D x 450mm (17.7") H
Product Dimensions w/Grab Handle Bracket:
556mm (21.9") H x 630mm (24.8") W x 65mm (") D
Product Dimensions w/Drill Mount Bracket:
458 (19.1") H x 630mm (24.8") W x 50mm (2") D
Weight:
3.7 kg (8.2lbs)
FRONT RUNNER Suzuki Jimny 3 Door (2018-Current) Base Deck -...
$422.10
$469.00
Includes 2 base decks (1 left and 1 right hand side), 3 mounting brackets, installation hardware and fitting instructions.
The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Suzuki Jimny.
The decks are covered with a durable, UV resistant nylon pile carpet.
The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration.
The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow, SUV Drawer / Small.
Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
Please Note: The rear seats need to be removed to install the base deck.
Features
Consists of:
2 x Base Decks (1 Left hand & 1 Right hand side)
3 x Mounting brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
12mm Laminated Plywood
Nylon Carpet
Product Dimensions:
830mm (32.7") L x 920mm (36.2") W x 110mm (4.3") H
Weight:
7.9kg (17.4lbs)
Load Rating:
250kg (551.2)
FRONT RUNNER Stainless Steel Water Tank For Ute Drawer System...
$1,414.80
$1,572.00
A 52L stainless steel water tank that fits behind the Front Runner Ute drawer system. This water tank is positioned below the drawer deck to utilize the concealed space between the back of the drawer and the vehicle to preserve needed cargo space. Includes a 12V pump.
Water Tank:A 52L stainless steel water tank that fits behind the Front Runner Ute drawer system.
This water tank is placed below the drawer deck to utilize the space between the back of the drawer and the vehicle.
All piping and fittings are provided to plumb the tanks contents to the front of the drawer system for ease of use.
Knocked out holes in the drawer's side panel plate accommodates the fittings and ensures that all the pipe work is neatly hidden.
Additionally a 12 volt electric pump is included to increase the outlet pressure and flow rate.
Water Pump:Features:
Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes.
Compact design and plug-in port fittings make installation easy.
Can run dry without damage and handle liquids up to 130° F (54° C).
No metal contact with liquid being pumped.
Ball bearing drive throughout pump and motor assures longer pump life.
Excellent self-priming capability. Pump may be located above the liquid level.
Powerful, permanent magnet motor with low current draw and long life brushes.
Consists of:1 x Stainless Steel Water Tank1 x Shut-off Valve1 x 12V Water PumpPipe KitInstallation HardwareWater Tank:Materials used:304 Stainless SteelProduct Dimensions:1065mm (41.9") W x 230mm (9.1") L x 285mm (11.2") HWeight:14.2kg (31.3lbs)Water Pump:Pump Specifications:12 Volts12.5 Liters per minute35psiProduct Dimensions:360mm (14.2") L x 135mm (5.3") W x 110mm (4.3") HWeight:2.13kg (4.7lbs)Approximate Total Product Weight:16.33kg (36lbs)
FRONT RUNNER Land Rover Defender 130 Ute Spare Wheel Carrier...
$1,129.50
$1,255.00
A spare wheel carrier for the Land Rover Defender 130/DC Ute.
Allows fitment of an additional spare wheel to the rear of the vehicle.
Secures to the chassis and the load bed body with supplied brackets and hardware.
The spare wheel can then swing open to allow the tail gate to be opened.
Load capacity 60kg (132.3lbs)
FRONT RUNNER Land Rover Defender Ute/Dc Spare Wheel Carrier /...
$901.80
$1,002.00
A spare wheel carrier for the Land Rover Defender 90 and 110 Ute.
Allows fitment of an additional spare wheel to the rear of the vehicle.
Secures to the chassis and the load bed body with supplied brackets and hardware.
The spare wheel can then swing open to allow the tail gate to be opened.
FRONT RUNNER Universal Awning Brackets - RRAC036
$148.50
$165.00
These brackets, sold in a set of three (3), are secured to your Awning which is then installed onto the side profile of your Front Runner Slimline II roof rack.
Pre-cut slotted holes allow easy attachment. No drilling required.
Each bracket fastens to the top T-slot system and to the bottom of the Slimline II roof rack side profile.
Made from steel to ensure durability, and black powder coated with the same weather resistant coating as the Slimline II roof rack.
NOTE: Suitable for the following awnings:
Foxwing 270 Awning
Darche Eclipse 180 and 270 Awnings
NOT SUITABLE FOR EASY OUT AWNINGS
Features
Consists of:
3x Awning brackets
Nuts and bolts kit
Materials used:
Black powder-coated steel
Weight:
2kg (4.4lbs)
FRONT RUNNER Toyota Hilux Revo Dc (2016-Current) Touring Drawer Kit...
$3,293.10
$3,659.00
This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
180kg / 397lb drawer load carrying capacity.
Hold open feature: drawer locks open while parked on uneven surfaces.
High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
A fridge (footprint of 750mm x 425mm or smaller) can be installed on the left hand side of the drawer for access through a gullwing style window.
The right rear deck and back right side deck each have a cut out (215mm in diameter) to fit and secure a gas/propane bottle or similar shaped object.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
The deck is covered with a durable, UV resistant gray marine carpet detailed to complement the vehicles interior contours.
The nylon carpet insulates secured cargo from noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
No drilling is required when fitted without lift channels and when a standard canopy is used and tailgate is left in place.
If your vehicle has a canopy with a swing open door that has replaced the original tailgate, drilling 3 lifting channels (included) may be necessary.
All Front Runner Storage Systems are backed by a 2 year warranty.
*Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.
Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner.
Features
Consists of:
1 x Front Runner Drawer unit (SSDR012)
1 x Toyota Hilux Revo DC (2016-Current) Touring Deck Completion Set (SSDS108)
1 x Drawer System Wing Set (SSWS004)
1 x Push to close latch with 2 keys per lock
3 x Accessory channels
6 x Eye Nuts for accessory channels
Installation Hardware includes 4 turnbuckles to secure unit to vehicle with standard canopy
Fitting Instruction
Materials used:
Black powder coated steel - Drawer Bins, Frame & Front Covers
Nylon Carpet & Laminated Plywood - Top Deck & Deck Set
Product Dimensions:
Overall Dimensions:
1510mm (59.5") L x 1604mm (63.2") W x 335mm (13.2") H
Drawer Internal Dimensions:
1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") H
Weight:
80.5kg (177.5lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 4533Mm (L)...
$480.60
$534.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 4533mm / 178.5".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
16x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
12x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
4131mm (162.6") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
8.26kg (18.2lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 3927Mm (L)...
$419.40
$466.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3927mm / 154.6" to 4129mm / 162.6".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
12x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
10x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3782mm (148.9") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
6.59kg (l14.5bs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 3579Mm (L)...
$333.90
$371.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3579mm / 140.9".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3206mm (126.22") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.64kg (12.4lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
