TJM
TJM XGS Sway Bar Spacer Kit Front 50Mm For Toyota Landcruiser Commercial - 663SB69A
$59.00
TJM XGS front sway bar mounting spacer kit 50mm to suit Toyota Landcruiser 70/76/78/79/80/105 Series. This is required to gain maximum suspension travel.
Package Weight:
2.00 kg
Compatible Vehicles
TOYOTA LANDCRUISER COMMERCIAL HZJ78, FZJ78 99-07 Troopy
TOYOTA LANDCRUISER COMMERCIAL HZJ79, FZJ79 99-07 2Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ76R 03/07-08/22 W/mate 4Dr Wagon
TOYOTA LANDCRUISER COMMERCIAL VDJ76R 03/07-08/22 GXL 4Dr Wagon
TOYOTA LANDCRUISER COMMERCIAL VDJ78R 03/07-08/22 W/mate Troopy
TOYOTA LANDCRUISER COMMERCIAL VDJ78R 03/07-08/22 GXL Troopy
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 03/07-8/16 W/mate 2Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 03/07-8/16 GX-GXL 2Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/16-08/22 W/mate 2Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/16-08/22 GX-GXL 2Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/12-08/22 W/mate 4Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/12-08/22 GX-GXL 4Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ76R 09/22-11/23 W/mate 4Dr Wagon
TOYOTA LANDCRUISER COMMERCIAL VDJ76R 09/22-11/23 GXL 4Dr Wagon
TOYOTA LANDCRUISER COMMERCIAL VDJ78R 09/22-11/23 W/mate Troopy
TOYOTA LANDCRUISER COMMERCIAL VDJ78R 09/22-11/23 GXL Troopy
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/22-11/23 GX-GXL 2Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/22-11/23 W/mate 4Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/22-11/23 W/mate 2Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 09/22-11/23 GX-GXL 4Dr C/Chassis
TOYOTA LANDCRUISER COMMERCIAL GDJ78R 12/23-ON GXL TROOPY 2.8L
TOYOTA LANDCRUISER COMMERCIAL VDJ78R 12/23-On GXL Troopy 4.5L
TOYOTA LANDCRUISER COMMERCIAL GDJ76R 12/23-On W/mate 4Dr Wagon 2.8L
TOYOTA LANDCRUISER COMMERCIAL GDJ76R 12/23-On GXL 4Dr Wagon 2.8L
TOYOTA LANDCRUISER COMMERCIAL VDJ76R 12/23-On GXL 4Dr Wagon 4.5L
TOYOTA LANDCRUISER COMMERCIAL GDJ78R 12/23-On W/mate Troopy 2.8L
TOYOTA LANDCRUISER COMMERCIAL VDJ78R 12/23-On W/mate Troopy 4.5L
TOYOTA LANDCRUISER COMMERCIAL GDJ79R 12/23-On W/mate 2Dr C/Chassis 2.8L
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 12/23-On W/mate 2Dr C/Chassis 4.5L
TOYOTA LANDCRUISER COMMERCIAL GDJ79R 12/23-On GX-GXL 2Dr C/Chassis 2.8L
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 12/23-On GX-GXL 2Dr C/Chassis 4.5L
TOYOTA LANDCRUISER COMMERCIAL GDJ79R 12/23-On W/mate 4Dr C/Chassis 2.8L
TOYOTA LANDCRUISER COMMERCIAL VDJ79R 12/23-On W/mate 4Dr C/Chassis 4.5L
TJM
TJM XGS Tailshaft Spacer Kit Rear For Ford Ranger Py 06/22-On - 653TSK21Y
$39.00
The XGS Tailshaft Spacer Kit is an optional, but highly recommended correction component for ensuring proper alignment of your vehicle's tailshaft. This kit can be used when the suspension has been raised, to realign the tailshaft for improved drivability and reduced stress on drivetrain components.
Material:
Black EDP Coated Steel
Package Weight:
0.25 kg
Compatible Vehicles
FORD RANGER PY 06/22-On XL 2Dr Cab Chas 2.0L SiT
FORD RANGER PY 06/22-On XL Super C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XL 4Dr C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLS 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT Super Cab P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT 4Dr C/C & P/Up 3.0L V6
FORD RANGER PY 06/22-On Sport 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On Sport 4Dr P/Up 3.0L V6
FORD RANGER PY 06/22-On WILDTRAK 4Dr P/Up 2.0 BiT
FORD RANGER PY 06/22-On WILDTRAK 4Dr P/Up 3.0 V6
VOLKSWAGEN AMAROK 05/23 -On Core 4Dr P/Up 2.0L TDI405
VOLKSWAGEN AMAROK 05/23 -On Life 4Dr P/Up 2.0L TDI500
VOLKSWAGEN AMAROK 05/23 -On Style 4Dr P/Up 2.0L TDI500
VOLKSWAGEN AMAROK 05/23 -On Style 4Dr P/Up 3.0L V6 TDI600
VOLKSWAGEN AMAROK 05/23 -On Pan Americana 4Dr P/Up 3.0L V6 TDI600
VOLKSWAGEN AMAROK 05/23 -On Aventura 4Dr P/Up 2.3L Petrol TSI452
VOLKSWAGEN AMAROK 05/23 -On Aventura 4Dr P/Up 3.0L V6 TDI600
TJM
TJM XGS Tailshaft Spacer Kit Rear For Mazda Bt-50 / Ord Ford Ranger Pxi 09/11-05/15 - 653TSK21T
$49.01
This centre bearing spacer kit suits Ford Ranger PX and Mazda BT-50 2012+ vehicles. Bearing spacer kits are required to realign a vehicle's tailshaft when suspension has been raised.
Package Weight:
0.25 kg
Compatible Vehicles
MAZDA BT-50 UP/UR 10/11-07/20
FORD RANGER PXI 09/11-05/15 WILDTRAK 4Dr P/Up
FORD RANGER PXI 09/11-05/15 XL 2Dr Cab Chassis
FORD RANGER PXI 09/11-05/15 XL 4Dr C/C & P/Up
FORD RANGER PXI 09/11-05/15 XL Super C/C & P/Up
FORD RANGER PXI 09/11-05/15 XLS 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 XL 2Dr Cab Chas
FORD RANGER PXII 06/15-07/18 XL 4Dr C/C & P/Up
FORD RANGER PXII 06/15-07/18 XL Super C/C & P/U
FORD RANGER PXII 06/15-07/18 XLS 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 WILDTRAK 4Dr P/Up
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XL 2Dr Cab Chas 3.2DT
FORD RANGER PXIII 08/18-05/22 XL 4Dr C/C & P/Up 2.2DT, 3.2DT
FORD RANGER PXIII 08/18-05/22 XL Super C/C & P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLT Super Cab P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XLT Super Cab P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLS 4Dr Pick Up 3.2DT
TJM
TJM XGS Tailshaft Spacer Kit Rear For Mitsubishi Triton Ml / Mitsubishi Triton Mn - 653TSK50L
$520.00
This rear tailshaft spacer kit suits Mitsubishi Triton ML / MN vehicles. Bearing spacer kits are required to realign a vehicle's tailshaft when suspension has been raised.
Package Weight:
0.40 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15
TJM
TJM XGS Tailshaft Spacer Kit Rear For Toyota Fortuner Gun156R - 653TSK87M
$69.00
This centre bearing spacer kit suits Toyota Fortuner 2015+ vehicles. Bearing spacer kits are required to realign a vehicle's tailshaft when suspension has been raised.
Package Weight:
2.00 kg
Compatible Vehicles
TOYOTA FORTUNER GUN156R 10/15-08/20 GX
TOYOTA FORTUNER GUN156R 10/15-08/20 GXL
TOYOTA FORTUNER GUN156R 10/15-08/20 Crusade
TOYOTA FORTUNER GUN156R 09/20-On GX
TOYOTA FORTUNER GUN156R 09/20-On GXL
TOYOTA FORTUNER GUN156R 09/20-On Crusade
TJM
TJM XGS Top Strut Mount - Each For Isuzu D-Max Rg 08/20-04/24 / Isuzu Mu-X Rf / Mazda Bt-50 Tf...
$99.00
Top strut mount to suit Toyota Prado 90 Series vehicles. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
0.64 kg
Compatible Vehicles
ISUZU D-MAX RG 08/20-04/24 2Dr Cab Chassis Hi Rider
ISUZU D-MAX RG 08/20-04/24 Space C/Chas & Pick Up
ISUZU D-MAX RG 08/20-04/24 4Dr C/Chas & Pick Up
ISUZU D-MAX RG 05/24-On LS-U Space Cab Pick Up
ISUZU D-MAX RG 05/24-On LS-M 4Dr Cab Chassis & Pick Up
ISUZU D-MAX RG 05/24-On LS-U 4Dr Cab Chassis & Pick Up
ISUZU MU-X RF 11/13-04/17
ISUZU MU-X RF 05/17-07/21
ISUZU MU-X UJ 08/21-On LS-U
ISUZU MU-X UJ 08/21-On LS-M
ISUZU MU-X UJ 08/21-On LS-T
MAZDA BT-50 TF 08/20-On 2Dr Cab Chassis
MAZDA BT-50 TF 08/20-On Freestyle Cab Chassis
MAZDA BT-50 TF 08/20-On 4dr Cab Chassis & Pick up
TOYOTA PRADO 90 SERIES 06/96-02/03
HOLDEN COLORADO RG 06/12-06/16
HOLDEN COLORADO RG 07/16-06/20
HOLDEN COLORADO 7 RG 12/12-03/16 Wagon
LDV T60 SK8C 10/17-08/21 2Dr C/C & 4Dr Pick Up
LDV T60 SK8C 01/19-08/21 4Dr Mega Tub
LDV T60 Max Pro SK8C 09/21-On 4Dr Pick Up
LDV T60 Max Luxe SK8C 09/21-On 4Dr Pick Up
TJM
TJM XGS Top Strut Mount - Each For Mitsubishi Challenger / Mitsubishi Pajero Sport/ Mitsubishi Triton Mq 04/15-11/18 - 659THB50L
$79.00
Top strut mount to suit Mitsubishi Triton vehicles. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
1.35 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up
TJM
TJM XGS Top Strut Mount - Each For Toyota Prado 150 Series/ Toyota Hilux 7Th Gen / 8Th Gen /...
$79.00
Top strut mount to suit Toyota Hilux 2005+ , Prado 150 and FJ Cruiser vehicles. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
0.75 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-10/24
TOYOTA HILUX 7th GEN 04/05-07/11
TOYOTA HILUX 7th GEN 08/11-08/15
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-On W/mate-SR 2Dr C/Chassis
TOYOTA HILUX 8th GEN 08/20-03/24 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-03/24 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-10/22 4Dr Pick Up Rogue/Rocco
TOYOTA HILUX 8th GEN 04/24-On Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 04/24-On 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 04/24-On 4Dr C/Chas & Pick Up 48V
TOYOTA FORTUNER GUN156R 10/15-08/20 GX
TOYOTA FORTUNER GUN156R 10/15-08/20 GXL
TOYOTA FORTUNER GUN156R 10/15-08/20 Crusade
TOYOTA FORTUNER GUN156R 09/20-On GX
TOYOTA FORTUNER GUN156R 09/20-On GXL
TOYOTA FORTUNER GUN156R 09/20-On Crusade
TOYOTA FJ CRUISER GSJ15R 03/11-08/16
TJM
TJM XGS Top Strut Mount - Each | For Mazda Bt-50 Up/Ur / Ford Ranger Pxi 09/11-05/15 / Ford Ranger...
$99.00
Top strut mount to suit PX Ranger PX1/PX2 and Mazda BT-50 vehicles. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
1.35 kg
Compatible Vehicles
MAZDA BT-50 UP/UR 10/11-07/20
FORD EVEREST UA 06/15-06/18 Ambiente
FORD EVEREST UA 06/15-06/18 Trend
FORD EVEREST UA 06/15-06/18 Titanium
FORD RANGER PXI 09/11-05/15 WILDTRAK 4Dr P/Up
FORD RANGER PXI 09/11-05/15 XL 2Dr Cab Chassis
FORD RANGER PXI 09/11-05/15 XL 4Dr C/C & P/Up
FORD RANGER PXI 09/11-05/15 XL Super C/C & P/Up
FORD RANGER PXI 09/11-05/15 XLS 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 XL 2Dr Cab Chas
FORD RANGER PXII 06/15-07/18 XL 4Dr C/C & P/Up
FORD RANGER PXII 06/15-07/18 XL Super C/C & P/U
FORD RANGER PXII 06/15-07/18 XLS 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 WILDTRAK 4Dr P/Up
TJM
TJM XGS Top Strut Mount - Each | For Toyota Landcruiser Wagon 300 Series - 659THB82A
$79.00
Top strut mount to suit Toyota Landcruiser 200/300 Series vehicles. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
1.05 kg
Compatible Vehicles
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On GX
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On GXL
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On VX
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On Sahara
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 GX
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 GXL
TOYOTA LANDCRUISER WAGON 200 SERIES 11/07-08/15 VX/SAHARA
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 VX/SAHARA
TOYOTA LANDCRUISER WAGON 200 SERIES 11/07-08/15 GX
TOYOTA LANDCRUISER WAGON 200 SERIES 11/07-08/15 GXL
TJM
TJM XGS Top Strut Mount Rubber Insulator Only For Mercedes X-Class X220D/X250D / Nissan Navara - 659THB10L
$29.00
Top strut mount insulator, requires steel part. Use in conjunction with 659THB10M top strut mount for insulator. TJM recommend the replacement of strut top assemblies every 100,000kms or when upgrading struts.
Package Weight:
0.15 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA D40 11/05-01/10 Spanish Built
NISSAN NAVARA D40 02/10-05/15 Spanish Built
NISSAN NAVARA D40 01/08-05/15 Thai Built
NISSAN NAVARA D40 ST, ST-X V6 Diesel 03/11-12/14
NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr C/C
NISSAN PATHFINDER R51 08/05-02/10
NISSAN PATHFINDER R51 03/10-09/13
TJM
TJM XGS Top Strut Mount Steel Part Only For Mercedes X-Class X220D/X250D / Nissan Navara D40 02/10-05/15 / Nissan Navara...
$49.01
Top strut mount for insulator, steel part only. Use in conjunction with 659THB10L top strut mount insulator. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
0.85 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA D40 11/05-01/10 Spanish Built
NISSAN NAVARA D40 02/10-05/15 Spanish Built
NISSAN NAVARA D40 01/08-05/15 Thai Built
NISSAN NAVARA D40 ST, ST-X V6 Diesel 03/11-12/14
NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr C/C
NISSAN PATHFINDER R51 08/05-02/10
NISSAN PATHFINDER R51 03/10-09/13
TJM
TJM XGS Torsion Bar Bracket Strengthening Kit For Toyota Landcruiser Wagon 100 Series/&Nbsp; Lexus Lx470 Uzj100R 10/98-10/07 - 663SB80B
$79.00
A front lower control arm strengthening kit can be used to help prevent torsion bar mounts from cracking.
Package Weight:
0.97 kg
Compatible Vehicles
TOYOTA LANDCRUISER WAGON 100 SERIES IFS 01/99-08/07
LEXUS LX470 UZJ100R 10/98-10/07
TJM
TJM XGS Torsion Bars - Pair For Holden Colorado Rc 07/08-05/12 / Holden Rodeo / Gwm V200 - V240/Isuzu D-Max...
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 30mm Length 1145mm
Suits:
Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
13.00 kg
Compatible Vehicles
HOLDEN COLORADO RC 07/08-05/12
HOLDEN RODEO RA 03/03-10/06
HOLDEN RODEO RA7 11/06-06/08
GWM V200 - V240 K2 08/11-12/14
ISUZU D-MAX RC 10/08-05/12
TJM
TJM XGS Torsion Bars - Pair For Hyundai Terracan Hp 11/01-12/08 - 657029
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 27.5mm Length 1275mm
Suits:
Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
13.50 kg
Compatible Vehicles
HYUNDAI TERRACAN HP 11/01-12/08
TJM
TJM XGS Torsion Bars - Pair For Mazda Bt-50 Un / Ford Ranger Pk/Ford Ranger Pj - 657028
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 27mm Length 1024mm
Suits:
Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
9.50 kg
Compatible Vehicles
MAZDA BT-50 UN 01/07-09/08
MAZDA BT-50 UN 10/08-09/11
FORD RANGER PK 04/09-08/11
FORD RANGER PJ 12/06-03/09
TJM
TJM XGS Torsion Bars - Pair For Mitsubishi Triton Mk 10/96-06/01 / Mitsubishi Triton Mk 07/01-06/06 - 657021
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 27.5mm Length 1368mm
Suits:
Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
13.00 kg
Compatible Vehicles
MITSUBISHI TRITON MK 10/96-06/01
MITSUBISHI TRITON MK 07/01-06/06
TJM
TJM XGS Torsion Bars - Pair For Nissan Navara D22 04/97-08/01/Nissan Navara D22 - 657026
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 27mm Length 892mm
Suits:
Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
13.00 kg
Compatible Vehicles
NISSAN NAVARA D22 04/97-08/01
NISSAN NAVARA D22 09/01-09/09 Japan Built
NISSAN NAVARA D22 10/09-03/15 Thai Built
TJM
TJM XGS Torsion Bars - Pair For Toyota Hilux 5Th Gen / Toyota Hilux 6Th Gen / Toyota 4Runner -...
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 26mm Length 1064mm
Suits:
Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
9.00 kg
Compatible Vehicles
TOYOTA HILUX 5th GEN 10/88-10/97 - Independent Front
TOYOTA HILUX 6th GEN 11/01-03/05
TOYOTA HILUX 6th GEN 11/97-10/01
TOYOTA 4RUNNER N60 08/85-09/89
TOYOTA 4RUNNER N130 10/89-06/96
TJM
TJM XGS Torsion Bars - Pair For Toyota Landcruiser Wagon 100 Series Ifs 01/99-08/07 - 657024
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 32mm Length 1210mm
Suits:
LC 100 Series Turbo Diesel Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
18.50 kg
Compatible Vehicles
TOYOTA LANDCRUISER WAGON 100 SERIES IFS 01/99-08/07
TJM
TJM XGS Torsion Bars - Pair For Toyota Landcruiser Wagon 100 Series Ifs 01/99-08/07 / Lexus Lx470 Uzj100R 10/98-10/07 -...
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 32mm Length 1160mm
Suits:
LC 100 Series V8 Petrol Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
16.00 kg
Compatible Vehicles
TOYOTA LANDCRUISER WAGON 100 SERIES IFS 01/99-08/07
LEXUS LX470 UZJ100R 10/98-10/07
TJM
TJM XGS U Bolt With Nuts Each For Mitsubishi Triton Ml 07/06-08/09/ &Nbsp;Mitsubishi Triton Mn 09/09-03/15 - 775032
$25.00
TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This XGS U-bolt is 12 x 72 x 170mm with a square top (B) and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.
FEATURES:
Size:
Square Top - Material OD 12mm - Inside Width 72mm - Inside Length 190mm
Size:
Square Top - Material OD 12mm - Inside Width 72mm - Inside Length 190mm
Package Weight:
0.40 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15
TJM
TJM XGS U-Bolt W/Flange Nuts Type B Od14 W62 L200 For Isuzu D-Max Rg 08/20-04/24 / Nissan Navara D40 /...
$19.00
When new springs are installed on your vehicle, reusing the existing U-bolts could create a potentially dangerous situation. This XGS U-bolt is 14 x 62 x 180mm with a square top (B) and should be used when upgrading to TJM leaf springs. If the original U-bolt is reused the pitch of the thread may be stretched, which can cause the U-bolt nut to loosen, thereby causing the spring pack to become loose. We highly recommend replacing U-bolts when new springs are installed. TJM XGS U-bolts are matched in length to our XGS leaf spring range to accommodate the increased spring stack height.
Size:
Square Top - Material OD 14mm - Inside Width 62mm - Inside Length 200mm
Package Weight:
0.47 kg
Compatible Vehicles
ISUZU D-MAX RG 08/20-04/24 2Dr Cab Chassis Hi Rider
ISUZU D-MAX RG 08/20-04/24 Space C/Chas & Pick Up
ISUZU D-MAX RG 08/20-04/24 4Dr C/Chas & Pick Up
MAZDA BT-50 TF 08/20-On 2Dr Cab Chassis
MAZDA BT-50 TF 08/20-On Freestyle Cab Chassis
MAZDA BT-50 TF 08/20-On 4dr Cab Chassis & Pick up
NISSAN NAVARA D40 11/05-01/10 Spanish Built
NISSAN NAVARA D40 02/10-05/15 Spanish Built
NISSAN NAVARA D40 01/08-05/15 Thai Built
NISSAN NAVARA D40 ST, ST-X V6 Diesel 03/11-12/14
TOYOTA HILUX 4th GEN 11/83-09/88
TOYOTA HILUX 5th GEN 10/88-10/97 - Independent Front
TOYOTA HILUX 5th GEN 10/88-10/97 - Leaf Front Suspension
TOYOTA HILUX 6th GEN 11/01-03/05
TOYOTA HILUX 7th GEN 04/05-07/11
TOYOTA HILUX 7th GEN 08/11-08/15
TOYOTA HILUX 6th GEN 11/97-10/01
TOYOTA 4RUNNER N60 08/85-09/89
FORD RANGER PY 06/22-On XL 2Dr Cab Chas 2.0L SiT
FORD RANGER PY 06/22-On XL Super C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLS 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On XL 4Dr C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT Super Cab P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT 4Dr P/Up 2.0L BiT
TJM
TJM XGS U-Bolt W/Flange Nuts Type B Od14 W62 L210 For Isuzu D-Max Tf 06/12-01/17 / Toyota Hilux 4Th &...
$19.00
TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This XGS U-bolt is 14 x 62 x 210mm with a forged top drivers side for Toyota Hilux front suspension and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.
FEATURES:
Size:
Square Top - Material OD 14mm - Inside Width 62mm - Inside Length 210mm Forged Top
Package Weight:
0.50 kg
Compatible Vehicles
ISUZU D-MAX TF 06/12-01/17 2Dr Cab Chassis Hi Rider
ISUZU D-MAX TF 06/12-01/17 Space C/Chas & Pick Up
ISUZU D-MAX TF 06/12-01/17 4Dr C/Chas & Pickup
ISUZU D-MAX TF 02/17-07/20 2Dr Cab Chassis Hi Rider
ISUZU D-MAX TF 02/17-07/20 Space C/Chas & Pick Up
ISUZU D-MAX TF 02/17-07/20 4Dr C/Chas & Pick Up
TOYOTA HILUX 4th GEN 11/83-09/88
TOYOTA HILUX 5th GEN 10/88-10/97 - Leaf Front Suspension
TOYOTA HILUX 7th GEN 04/05-07/11
TOYOTA HILUX 7th GEN 08/11-08/15
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-On W/mate-SR 2Dr C/Chassis
HOLDEN COLORADO RG 06/12-06/16
HOLDEN COLORADO RG 07/16-06/20
LDV T60 SK8C 10/17-08/21 2Dr C/C & 4Dr Pick Up
LDV T60 SK8C 01/19-08/21 4Dr Mega Tub
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Ford Ranger Py 06/22-On Xlt 4Dr / Volkswagen Amarok 05/23 -On...
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
250MPA Steel MaterialElectrocoated Zinc and powder coat finish
Castor Correction:
3 degrees
Suits:
Vehicles with alloy hubs/uprights
Features:
Factory style rubber bushes designed to reduce NVHFactory style ball jointsStronger than FactoryAllows for castor correction for vehicles lifted up to 75mm
Package Weight:
7.40 kg
Compatible Vehicles
FORD RANGER PY 06/22-On XLT 4Dr C/C & P/Up 3.0L V6
FORD RANGER PY 06/22-On Sport 4Dr P/Up 3.0L V6
FORD RANGER PY 06/22-On WILDTRAK 4Dr P/Up 3.0 V6
FORD EVEREST UB 09/22-On Platinum 3.0L V6
FORD EVEREST UB 09/22-On Sport 3.0L V6
VOLKSWAGEN AMAROK 05/23 -On Style 4Dr P/Up 3.0L V6 TDI600
VOLKSWAGEN AMAROK 05/23 -On Pan Americana 4Dr P/Up 3.0L V6 TDI600
VOLKSWAGEN AMAROK 05/23 -On Aventura 4Dr P/Up 2.3L Petrol TSI452
VOLKSWAGEN AMAROK 05/23 -On Aventura 4Dr P/Up 3.0L V6 TDI600
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Isuzu D-Max Rg 08/20-04/24 - 658CONTARM134G
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
250MPA Steel MaterialElectrocoated Zinc and powder coat finish
Castor Correction:
3 degrees
Features:
Factory style rubber bushes designed to reduce NVHFactory style ball jointsStronger than FactoryAllows for castor correction for vehicles lifted up to 75mm
Package Weight:
9.00 kg
Compatible Vehicles
ISUZU D-MAX RG 08/20-04/24 2Dr Cab Chassis Hi Rider
ISUZU D-MAX RG 08/20-04/24 Space C/Chas & Pick Up
ISUZU D-MAX RG 08/20-04/24 4Dr C/Chas & Pick Up
ISUZU D-MAX RG 05/24-On SX 2Dr Cab Chassis
ISUZU D-MAX RG 05/24-On SX Space Cab Cab Chassis
ISUZU D-MAX RG 05/24-On LS-U Space Cab Pick Up
ISUZU D-MAX RG 05/24-On SX 4Dr Cab Chassis & Pick Up
ISUZU D-MAX RG 05/24-On LS-M 4Dr Cab Chassis & Pick Up
ISUZU D-MAX RG 05/24-On LS-U 4Dr Cab Chassis & Pick Up
ISUZU D-MAX RG 05/24-On LS-U+ 4Dr Pick Up
ISUZU D-MAX RG 05/24-On X-Rider 4Dr Pick Up
ISUZU D-MAX RG 05/24-On X-Terrain 4Dr Pick Up
ISUZU MU-X UJ 08/21-On LS-M
ISUZU MU-X UJ 08/21-On LS-U
ISUZU MU-X UJ 08/21-On LS-T
MAZDA BT-50 TF 08/20-On Freestyle Cab Chassis
MAZDA BT-50 TF 08/20-On 4dr Cab Chassis & Pick up
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Isuzu D-Max Tf 06/12-01/17/ Isuzu Mu-X Rf / Holden Trailblazer Rg...
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
2.5mm & 4mm Steel Construction. Electro Zinc plated & ed finish
Suits:
Suits 35 -75mm Suspension lifts
Tech:
OE Style Bushed and Ball Joints. 3 Deg Castor Correction
Package Weight:
9.00 kg
Compatible Vehicles
ISUZU D-MAX TF 06/12-01/17 2Dr Cab Chassis Hi Rider
ISUZU D-MAX TF 06/12-01/17 Space C/Chas & Pick Up
ISUZU D-MAX TF 06/12-01/17 4Dr C/Chas & Pickup
ISUZU D-MAX TF 02/17-07/20 2Dr Cab Chassis Hi Rider
ISUZU D-MAX TF 02/17-07/20 Space C/Chas & Pick Up
ISUZU D-MAX TF 02/17-07/20 4Dr C/Chas & Pick Up
ISUZU MU-X RF 11/13-04/17
ISUZU MU-X RF 05/17-07/21
HOLDEN COLORADO RG 06/12-06/16
HOLDEN COLORADO RG 07/16-06/20
HOLDEN COLORADO 7 RG 12/12-03/16 Wagon
HOLDEN TRAILBLAZER RG 07/16-06/20 Wagon
LDV T60 SK8C 10/17-08/21 2Dr C/C & 4Dr Pick Up
LDV T60 Max Pro SK8C 09/21-On 4Dr Pick Up
LDV T60 Max Luxe SK8C 09/21-On 4Dr Pick Up
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Mazda Bt-50 Up/Ur/ Ford Ranger Pxi 09/11-05/15 / Ford Ranger Pxiii...
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
2.5mm Steel Construction. Electro Zinc plated & ed finish
Suits:
Suits 35 -75mm Suspension lifts
Tech:
OE Style Bushed and Ball Joints. 3 Deg Castor Correction
Package Weight:
9.00 kg
Compatible Vehicles
MAZDA BT-50 UP/UR 10/11-07/20
FORD RANGER PXI 09/11-05/15 WILDTRAK 4Dr P/Up
FORD RANGER PXI 09/11-05/15 XL 2Dr Cab Chassis
FORD RANGER PXI 09/11-05/15 XL 4Dr C/C & P/Up
FORD RANGER PXI 09/11-05/15 XL Super C/C & P/Up
FORD RANGER PXI 09/11-05/15 XLS 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 XL 2Dr Cab Chas
FORD RANGER PXII 06/15-07/18 XL 4Dr C/C & P/Up
FORD RANGER PXII 06/15-07/18 XL Super C/C & P/U
FORD RANGER PXII 06/15-07/18 XLS 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 WILDTRAK 4Dr P/Up
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XL 2Dr Cab Chas 3.2DT
FORD RANGER PXIII 08/18-05/22 XL 4Dr C/C & P/Up 2.2DT, 3.2DT
FORD RANGER PXIII 08/18-05/22 XL Super C/C & P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLT Super Cab P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XLT Super Cab P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLS 4Dr Pick Up 3.2DT
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Nissan Navara Np300 08/15-11/20/ Nissan Navara D23 S4 12/20-On - 658CONTARM110R
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
250MPA Steel MaterialElectrocoated Zinc and powder coat finish
Castor Correction:
3 degrees
Features:
Factory style rubber bushes designed to reduce NVHFactory style ball jointsStronger than FactoryAllows for castor correction for vehicles lifted up to 65mm
Package Weight:
6.84 kg
Compatible Vehicles
NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Toyota Hilux 8Th Gen / Toyota Fortuner Gun156R - 658CONTARM187D
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 50mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
2.5mm Steel Construction. Electro Zinc plated & ed finish
Suits:
Suits 35 - 50mm Suspension lifts
Tech:
OE Style Bushed and Ball Joints. 1 Deg Castor Correction
Package Weight:
9.00 kg
Compatible Vehicles
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-On W/mate-SR 2Dr C/Chassis
TOYOTA HILUX 8th GEN 08/20-03/24 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-03/24 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-10/22 4Dr Pick Up Rogue/Rocco
TOYOTA HILUX 8th GEN 04/24-On Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 04/24-On 4Dr C/Chas & Pick Up
TOYOTA FORTUNER GUN156R 10/15-08/20 GX
TOYOTA FORTUNER GUN156R 10/15-08/20 GXL
TOYOTA FORTUNER GUN156R 10/15-08/20 Crusade
TOYOTA FORTUNER GUN156R 09/20-On GX
TOYOTA FORTUNER GUN156R 09/20-On GXL
TOYOTA FORTUNER GUN156R 09/20-On Crusade
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Toyota Hilux 8Th Gen 09/15-07/18 / Toyota Fortuner Gun156R - 658CONTARM189B
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
2.5mm Steel Construction. Electro Zinc plated & ed finish
Suits:
Suits 35 -75mm Suspension lifts
Tech:
OE Style Bushed and Ball Joints. 3 Deg Castor Correction
Package Weight:
9.00 kg
Compatible Vehicles
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-On W/mate-SR 2Dr C/Chassis
TOYOTA HILUX 8th GEN 08/20-03/24 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-03/24 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-10/22 4Dr Pick Up Rogue/Rocco
TOYOTA HILUX 8th GEN 04/24-On Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 04/24-On 4Dr C/Chas & Pick Up
TOYOTA FORTUNER GUN156R 10/15-08/20 GX
TOYOTA FORTUNER GUN156R 10/15-08/20 GXL
TOYOTA FORTUNER GUN156R 10/15-08/20 Crusade
TOYOTA FORTUNER GUN156R 09/20-On GX
TOYOTA FORTUNER GUN156R 09/20-On GXL
TOYOTA FORTUNER GUN156R 09/20-On Crusade
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Toyota Landcruiser Wagon 200 Series - 658CONTARM182A
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
4mm Steel Construction. Electro Zinc plated & ed finish
Suits:
Suits 35 -75mm Suspension lifts
Tech:
OE Style Bushed and Ball Joints. 3 Deg Castor Correction
Package Weight:
10.00 kg
Compatible Vehicles
TOYOTA LANDCRUISER WAGON 200 SERIES 11/07-08/15 GX
TOYOTA LANDCRUISER WAGON 200 SERIES 11/07-08/15 GXL
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 GX
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 GXL
TOYOTA LANDCRUISER WAGON 200 SERIES 11/07-08/15 VX/SAHARA
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 VX/SAHARA
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Toyota Landcruiser Wagon 300 Series - 658CONTARM182D
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
4mm Steel Construction. Electro Zinc plated & ed finish
Suits:
Suits 35 -75mm Suspension lifts
Tech:
OE Style Bushed and Ball Joints. 3 Deg Castor Correction
Package Weight:
10.00 kg
Compatible Vehicles
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On GX
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On GXL
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On VX
TOYOTA LANDCRUISER WAGON 300 SERIES 11/21-On Sahara
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Toyota Prado 150 Series 11/13-10/17 / Toyota Prado 150 Series 11/17-10/24...
$915.00
The TJM fully fabricated XGS upper control arms are 100% bolt-on and designed to work with any suspension lift 35 - 75mm. XGS fabricated arms where designed to bring your factory suspension geometry back to OE specifications so you can correctly align your vehicle giving better tyre wear, road feel and maximizing over all suspension travel.
Material:
2.5mm Steel Construction. Electro Zinc plated & ed finish
Suits:
Suits 35 -75mm Suspension lifts
Tech:
OE Style Bushed and Ball Joints. 3 Deg Castor Correction
Package Weight:
9.00 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-10/24
TJM
TJM XGS Upper Control Arm Fabricated Steel (Pair) For Volkswagen Amarok 05/23 -On / Volkswagen Amarok 05/23 -On / Ford...
$915.00
XGS Upper Control Arms are a versatile upgrade that will suit any suspension setup lift between 35 and 75mm. These control arms are designed to bring your vehicle's suspension geometry back to factory specifications, allowing for correct alignment and maximizing suspension travel. Installation is quick and easy, and the use of factory style ball joints and bushes ensures compatibility with a wide range of suspension setups. The box style construction and electrocoated zinc and powdercoat finish not only provide strength and durability but also a sleek look to your vehicle's undercarriage. And with the supplied rubber bushes, you can enjoy reduced NVH for a smoother and more comfortable ride. Invest in the XGS Upper Control Arms today and experience improved handling, better tire wear, and maximized suspension travel, no matter what suspension setup you have. These control arms are the perfect upgrade for any off-road enthusiast looking to take their vehicle to the next level.
Material:
4mm steel with Zinc Plate coating and Powdercoat finish.
Castor Correction:
3 degrees
Suits:
Vehicles with cast steel hubs/uprights
Features:
Factory style rubber bushes designed to reduce NVHFactory style ball jointsStronger than FactoryAllows for castor correction for vehicles lifted up to 75mm
Package Weight:
8.40 kg
Compatible Vehicles
VOLKSWAGEN AMAROK 05/23 -On Core 4Dr P/Up 2.0L TDI405
VOLKSWAGEN AMAROK 05/23 -On Life 4Dr P/Up 2.0L TDI500
VOLKSWAGEN AMAROK 05/23 -On Style 4Dr P/Up 2.0L TDI500
VOLKSWAGEN AMAROK 05/23 -On Style 4Dr P/Up 3.0L V6 TDI600
VOLKSWAGEN AMAROK 05/23 -On Pan Americana 4Dr P/Up 3.0L V6 TDI600
VOLKSWAGEN AMAROK 05/23 -On Aventura 4Dr P/Up 2.3L Petrol TSI452
VOLKSWAGEN AMAROK 05/23 -On Aventura 4Dr P/Up 3.0L V6 TDI600
FORD RANGER PY 06/22-On XL 2Dr Cab Chas 2.0L SiT
FORD RANGER PY 06/22-On XL Super C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XL 4Dr C/C & P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLS 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On XLT 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On Sport 4Dr P/Up 2.0L BiT
FORD RANGER PY 06/22-On WILDTRAK 4Dr P/Up 2.0 BiT
FORD RANGER PY 06/22-On XLT 4Dr C/C & P/Up 3.0L V6
FORD RANGER PY 06/22-On WILDTRAK 4Dr P/Up 3.0 V6
FORD EVEREST UB 09/22-On Ambiente 2.0L BiT
FORD EVEREST UB 09/22-On Trend 2.0L BiT
FORD EVEREST UB 09/22-On Platinum 3.0L V6
FORD EVEREST UB 09/22-On Sport 3.0L V6
TJM
TJM Yellow Winch Rope Synthetic 9.5Mm - 946TQSYNR1
$269.01
The Synthetic Rope 9.5mm is the perfect addition to your Torq winch setup. This high-quality rope is made from durable synthetic materials that are designed to withstand tough off-road conditions. The 9.5mm thickness provides excellent strength, making it ideal for heavy-duty use. Unlike traditional steel cables, synthetic ropes are lighter and easier to handle, reducing the risk of injury during operation. Specifications Suitable for winches up to 12,000lb 9.5mmØ x 28metre Constructed from 12 Strand Braided UHMWPE Includes stainless rope thimble & protective sleeve at both ends to provide additional abrasion & wear resistance & protect the rope from heat generated from drum Package Weight: 2.10 kg
TJM
TMJ Yulara Roof Top Tent - 620RCTRT02 (In Store Pick-Up Only)
$1,599.00
TJM roof top tents and awnings are ready within minutes, so you can relax and enjoy the great outdoors. There is plenty to love about high set camping where the views are better and less sand gets transported into your tent. Not to mention extra security, and with Australia's abundant wildlife this can make for a more restful nights sleep. Manufactured from long-lasting poly/cotton breathable fabric, the Yulara roof top tent is mould resistant and waterproof, and fits neatly onto the roof of your 4x4. Access is easy, with the included aluminium retractable ladder. No need to worry about inflating air mattresses either, as a 65mm high-density foam mattress with a removable cover is also included. The Yulara features fully screened windows and doors, and a pull-out veranda. To get even more space add an optional TJM zip-on annexe.
Specifications
Size: Open size 3.20 L x 1.40W x 1.30 H / Closed size 1.20 L x 1.40 W x .28H Fly: 420D Polyester pu2000mm, 100% waterproof canvas ( Ripstop) 64kg Total weight
Inner: Polyester/ Cotton 280g/m2 100% waterproof canvas ( Ripstop)
Pole: Aluminium pole, 19mm/16mm/1.2mm
Base: Lightweight high strength aluminium base
Ladder: Extendable aluminium ladder ( optional TJM ladder extension also available)
Mattress: 65mm high density foam mattress, 240 x 120cm, 50% polyester, 50% cotton.
Cover: 1000D waterproof , rot proof, polyester with PVC coating, UV and mould resistant
Mosquito net fabric: Nylon, fire resistant.
Package Weight: 64.00 kg
TJM
TRAY Deluxe Heavy Duty 6'8 (In Store Pick-Up Only) - BCTD66
$2,757.82
Whether it’s general or heavy-duty use, Bocar Deluxe Alloy Ute Tray will become your new best friend. Thanks to its 1855 mm wide, 2035 mm length and 235 mm high drop sides, it’s perfect for work and play. It allows you to carry more and get on with the job. At its core is a strong and lightweight aluminium body that’s based around a heavy-duty floor that boasts additional structural beams for extra durability and carrying capability. This is backed up by a headboard that has safety mesh and upright braces that are anchored to the tray’s floor beams, headboard panel and chassis rail for superior strength. Bocar Deluxe Alloy Ute Tray is a heavy duty and yet affordable tray suitable for general and heavy-duty use. Features include aluminium construction body with a heavy-duty floor, contoured satin finish Ø76mm headboard including welded alloy mesh. The Bocar Deluxe Alloy Ute Tray also features drop-sides and rear tailgate, which are locked in place by improved heavy-duty over-centre latc
Structure:
Aluminium construction body with heavy duty floor and alloy main support runners
Headboard:
Contoured 76mm Ø with satin finish and welded alloy mesh headboard. 20mm Ø load holding pins
Latches:
Heavy duty over centre latches
Installation:
Heavy duty mounting system
Dimension:
2035 (Length) x 1855 (Width) x 235 (Height - Side Panel)
Warranty:
2 year warranty
Package Weight:
110.00 kg
TJM
TRAY Deluxe Heavy Duty 7'6 (In Store Pick-Up Only) - BCTD76
$2,859.00
Whether it’s general or heavy-duty use, Bocar Deluxe Alloy Ute Tray will become your new best friend. Thanks to its 1855 mm wide, 2335 mm length and 235 mm high drop sides, it’s perfect for work and play. It allows you to carry more and get on with the job. At its core is a strong and lightweight aluminium body that’s based around a heavy-duty floor that boasts additional structural beams for extra durability and carrying capability. This is backed up by a headboard that has safety mesh and upright braces that are anchored to the tray’s floor beams, headboard panel and chassis rail for superior strength. Bocar Deluxe Alloy Ute Tray is a heavy duty and yet affordable tray suitable for general and heavy-duty use. Features include aluminium construction body with a heavy-duty floor, contoured satin finish Ø76mm headboard including welded alloy mesh. The Bocar Deluxe Alloy Ute Tray also features drop-sides and rear tailgate, which are locked in place by improved heavy-duty over-centre latc.
Structure:
Aluminium construction body with heavy duty floor and alloy main support runners
Headboard:
Contoured 76mm Ø with satin finish and welded alloy mesh headboard. 20mm Ø load holding pins
Latches:
Heavy duty over centre latches
Installation:
Heavy duty mounting system
Dimension:
2335 (Length) x 1855 (Width) x 235 (Height - Side Panel)
Warranty:
2 year warranty
Package Weight:
135.00 kg
TJM
TRAY Ultimate Heavy Duty 6'2 (In Store Pick-Up Only) - BCTU60
$3,150.00
Whether it’s general or heavy-duty use, Bocar Ultimate Alloy Ute Tray will become your new best friend. Thanks to its 1980 mm wide, 1885 mm length and 300 mm high drop sides, it’s perfect for work and play. It allows you to carry more and get on with the job. At its core is a strong and lightweight aluminium body that’s based around a heavy-duty floor that boasts additional structural beams for extra durability and carrying capability. This is backed up by a headboard that has safety mesh and upright braces that are anchored to the tray’s floor beams, headboard panel and chassis rail for superior strength. Bocar Ultimate Alloy Ute Tray is a heavy duty and yet affordable tray suitable for general and heavy-duty use. Features include aluminium construction body with a heavy-duty floor, contoured satin finish Ø76mm headboard including welded alloy mesh. The Bocar Ultimate Alloy Ute Tray also features drop-sides and rear tailgate, which are locked in place by improved heavy-duty over-centr.
Structure:
Aluminium construction body with heavy duty floor and alloy main support runners
Headboard:
Contoured 76mm Ø with satin finish and welded alloy mesh headboard. 20mm Ø load holding pins
Latches:
Heavy duty over centre latches
Installation:
Heavy duty mounting system
Dimension:
1885 (Length) x 1980 (Width) x 300 (Height - Side Panel)
Warranty:
2 year warranty
Package Weight:
235.00 kg
TJM
TRAY Ultimate Heavy Duty 7'2 (In Store Pick-Up Only) - BCTU70
$3,220.00
Whether it’s general or heavy-duty use, Bocar Ultimate Alloy Ute Tray will become your new best friend. Thanks to its 1980 mm wide, 2185 mm length and 300 mm high drop sides, it’s perfect for work and play. It allows you to carry more and get on with the job. At its core is a strong and lightweight aluminium body that’s based around a heavy-duty floor that boasts additional structural beams for extra durability and carrying capability. This is backed up by a headboard that has safety mesh and upright braces that are anchored to the tray’s floor beams, headboard panel and chassis rail for superior strength. Bocar Ultimate Alloy Ute Tray is a heavy duty and yet affordable tray suitable for general and heavy-duty use. Features include aluminium construction body with a heavy-duty floor, contoured satin finish Ø76mm headboard including welded alloy mesh. The Bocar Ultimate Alloy Ute Tray also features drop-sides and rear tailgate, which are locked in place by improved heavy-duty over-centr
Structure:
Aluminium construction body with heavy duty floor and alloy main support runners
Headboard:
Contoured 76mm Ø with satin finish and welded alloy mesh headboard. 20mm Ø load holding pins
Latches:
Heavy duty over centre latches
Installation:
Heavy duty mounting system
Dimension:
2185 (Length) x 1980 (Width) x 300 (Height - Side Panel)
Warranty:
2 year warranty
Package Weight:
245.00 kg
TJM
TRAY Ultimate Heavy Duty 8'2 (In Store Pick-Up Only) - BCTU80
$3,320.00
Whether it’s general or heavy-duty use, Bocar Ultimate Alloy Ute Tray will become your new best friend. Thanks to its 1980 mm wide, 2485 mm length and 300 mm high drop sides, it’s perfect for work and play. It allows you to carry more and get on with the job. At its core is a strong and lightweight aluminium body that’s based around a heavy-duty floor that boasts additional structural beams for extra durability and carrying capability. This is backed up by a headboard that has safety mesh and upright braces that are anchored to the tray’s floor beams, headboard panel and chassis rail for superior strength. Bocar Ultimate Alloy Ute Tray is a heavy duty and yet affordable tray suitable for general and heavy-duty use. Features include aluminium construction body with a heavy-duty floor, contoured satin finish Ø76mm headboard including welded alloy mesh. The Bocar Ultimate Alloy Ute Tray also features drop-sides and rear tailgate, which are locked in place by improved heavy-duty over-centr
Structure:
Aluminium construction body with heavy duty floor and alloy main support runners
Headboard:
Contoured 76mm Ø with satin finish and welded alloy mesh headboard. 20mm Ø load holding pins
Latches:
Heavy duty over centre latches
Installation:
Heavy duty mounting system
Dimension:
2485 (Length) x 1980 (Width) x 300 (Height - Side Panel)
Warranty:
2 year warranty
Package Weight:
255.00 kg
TJM
TRAY Ultimate Heavy Duty 8'2 (In Store Pick-Up Only) - BCTU80
$3,320.00
Whether it’s general or heavy-duty use, Bocar Ultimate Alloy Ute Tray will become your new best friend. Thanks to its 1980 mm wide, 2485 mm length and 300 mm high drop sides, it’s perfect for work and play. It allows you to carry more and get on with the job. At its core is a strong and lightweight aluminium body that’s based around a heavy-duty floor that boasts additional structural beams for extra durability and carrying capability. This is backed up by a headboard that has safety mesh and upright braces that are anchored to the tray’s floor beams, headboard panel and chassis rail for superior strength. Bocar Ultimate Alloy Ute Tray is a heavy duty and yet affordable tray suitable for general and heavy-duty use. Features include aluminium construction body with a heavy-duty floor, contoured satin finish Ø76mm headboard including welded alloy mesh. The Bocar Ultimate Alloy Ute Tray also features drop-sides and rear tailgate, which are locked in place by improved heavy-duty over-centr.
Structure:
Aluminium construction body with heavy duty floor and alloy main support runners
Headboard:
Contoured 76mm Ø with satin finish and welded alloy mesh headboard. 20mm Ø load holding pins
Latches:
Heavy duty over centre latches
Installation:
Heavy duty mounting system
Dimension:
2485 (Length) x 1980 (Width) x 300 (Height - Side Panel)
Warranty:
2 year warranty
Package Weight:
255.00 kg
TJM
TRAY Ultimate Heavy Duty 9'2 (In Store Pick-Up Only) - BCTU90
$3,347.43
Whether it’s general or heavy-duty use, Bocar Ultimate Alloy Ute Tray will become your new best friend. Thanks to its 1980 mm wide, 2785 mm length and 300 mm high drop sides, it’s perfect for work and play. It allows you to carry more and get on with the job. At its core is a strong and lightweight aluminium body that’s based around a heavy-duty floor that boasts additional structural beams for extra durability and carrying capability. This is backed up by a headboard that has safety mesh and upright braces that are anchored to the tray’s floor beams, headboard panel and chassis rail for superior strength. Bocar Ultimate Alloy Ute Tray is a heavy duty and yet affordable tray suitable for general and heavy-duty use. Features include aluminium construction body with a heavy-duty floor, contoured satin finish Ø76mm headboard including welded alloy mesh. The Bocar Ultimate Alloy Ute Tray also features drop-sides and rear tailgate, which are locked in place by improved heavy-duty over-centr.
Structure:
Aluminium construction body with heavy duty floor and alloy main support runners
Headboard:
Contoured 76mm Ø with satin finish and welded alloy mesh headboard. 20mm Ø load holding pins
Latches:
Heavy duty over centre latches
Installation:
Heavy duty mounting system
Dimension:
2785 (Length) x 1980 (Width) x 300 (Height - Side Panel)
Warranty:
2 year warranty
Package Weight:
265.00 kg
TJM
TJM Awning To Suit Allora Rtt - 620ALYRTTAWN (Pick up Only)
$269.01
The TJM Awning is a perfect match for the Allora Aluminium Rooftop Tent, designed to bring added comfort and protection on your outdoor adventures. Constructed from durable 420D Oxford Polyester Fabric, this awning boasts a water column rating of 3000mm, ensuring reliable water resistance even in unpredictable weather. Quick and easy to set up, it offers ample shade, making it ideal for relaxing, or staying dry during unexpected showers. Enhance your rooftop tent experience with the TJM Awning—built tough for the great outdoors.
Specifications
Compatible:
TJM Allora Aluminium Roof Top Tent
Shade Coverage:
Provides up to 7.5m2 of shade
Material:
420D polyester Oxford fabric with 3000mm PU waterproof rating, UPF 50+
Parts Included:
Awning, aluminium telescopic tent poles, ground pegs, guy ropes, and storage bags
Package Weight:
6.50 kg
TJM
TJM Wireless 8 Gang Switch Panel Controller - 032TJM8WSPC
$259.00
Take control of your off-road setup with the ultimate 8-gang wireless switch controller from TJM. Designed for explorers who demand precision and power, this controller lets you command your 4x4’s accessories from up to 60m away. With customizable backlighting, 3 switch modes, and a140 interchangeable legends, you’ll have total control over your adventure. Quick to recharge, ruggedly built, and powerful enough for any job - this isn’t just a controller, it’s your key to freedom. Take The Lead.
Voltage: 12V/24V DCPower Capacity: 720W @ 12V DC, 1920W @ 24V DCMaximum Current: 60 amp (Combined Total)Standby Power: <3mAPower Source: 3.7V Dc Lithium 1000 mAhFrequency: 433MhzCharge Time: 2-3 hrsCertification: CE, EMC, RoHSDimensions: 127 x 69 x 14mm (Controller), 192 x 135 x 36mm (Control Box)Weight: 160grams (Controller), 570grams (Control Box)Package Weight: 2.18 kg
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
TJM
TJM Compressor Bundle - TJMCOMPRESSORBUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
sale
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
sale
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
Contact Us
Address: 1b/750 Pittwater Rd, Brookvale NSW 2100
Contact Number: 1300 856 888
Email Address: orders@tjmnorthernbeaches.com.au
WE ACCEPT
© 2025 tjmnorthernbeaches.com.au. All rights reserved. | ABN: 49 121 938 190
🔒Site Secured with SSL 🛡️Encrypted Checkout ✅Powered by Shopify 💳Trusted Payments