Toyota 4WD Parts and Accessories for Off-Road and Touring

Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction-Plus™ PreLine-Plus Pre-filter kit PL628DPK fits in Toyota Hilux and Fortuner. PROTECTION FROM CORROSION AND ABRASION Direction-Plus™ PreLine-Plus Pre-filter kit is an innovative pre-filter system designer for diesel fuel systems which will ensure a high degree of water and particle pre-separation protecting your fuel system from corrosion and abrasion. The kit also includes an intuitive multi-stage water alert that will notify when it is necessary to drain the filter.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines. With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems. PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines. With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems. PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure. Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.

Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.

VEHICLE DATE: 06/21-Current PRODUCT TYPE: Premium Canvas Seat covers SUITS: Prado 150 VX/Kakadu 7 Seater (Including Factory Pack Leather) Front twin bucket airbag seats with console cover and integrated lumbar support FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean *Only available on select models

VEHICLE DATE: 06/21-Current PRODUCT TYPE: Premium Canvas Seat covers SUITS: Prado 150 New Gen VX/Kakadu 7 Seater (Including Factory Pack Leather) Complete front and second row seat set - (21036 + TLP24) FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean *Only available on select models

VEHICLE DATE: 06/21-Current PRODUCT TYPE: Premium Canvas Seat covers SUITS: Prado 150 Series (06/21-Current) GX 5 Seater/ GX/GXL 7 Seater (Not Including Factory Pack Leather) Front twin bucket airbag seats with console cover and integrated lumbar support FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean *Only available on select models

VEHICLE DATE: 06/21-Current PRODUCT TYPE: Premium Canvas Seat covers SUITS: Prado 150 New Gen GX/GXL 7 Seater (Not Including Factory Pack Leather) Complete front and second row seat set - (21038 + TLP24) FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean *Only available on select models

VEHICLE DATE: 06/21-Current PRODUCT TYPE: Premium Canvas Seat covers SUITS: Prado 150 Series New Gen GX 5 Seater Complete front and second row seat set - (21038 + TLP28) FEATURES: Fully Airbag Compliant ADR Certified Integrated Lumber Support* Tight and secure fit 12oz specially manufactured Polycotton blend canvas Reinforced high wear areas for longevity Polycotton lined for maximum protection of the original vehicle seats Large rear pockets and head rest covers as standard INCLUDES: MSA 4x4’s Lifetime Guarantee NOTE: DO NOT machine wash DO NOT scrub DO NOT apply detergent to clean *Only available on select models

MSA 4X4 HILUX 7TH GEN DOUBLE STORAGE DRAWER SYSTEM-E1350-HILUX7-COM SUITS: Toyota HiLux 7th Gen Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA HILUX 7TH GEN LEFT STORAGE DRAWER SYSTEM-E1350-HILUX7-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA HILUX 7TH GEN RIGHT STORAGE DRAWER SYSTEM-E1350-HILUX7-RI-COM SUITS: Toyota HiLux 7th Gen Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

Suits Toyota HiLux 8th Gen   MSA HILUX 8TH GEN LEFT STORAGE DRAWER SYSTEM-E1350-HILUX8-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim XTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA HILUX 8TH GEN RIGHT STORAGE DRAWER SYSTEM-E1350-HILUX8-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA 4X4 FORTUNER DOUBLE STORAGE DRAWER SYSTEM-E930-FORTUN-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA FORTUNER LEFT STORAGE DRAWER SYSTEM-E930-FORTUN-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim XTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA FORTUNER RIGHT STORAGE DRAWER SYSTEM -E930-FORTUN-RI-COM Suits Toyota Fortuner Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 PRADO 120 DOUBLE STORAGE DRAWER SYSTEM-E930-PRA120-COM Designed from the ground up, the way a quality 4WD storage system should be. SUITS Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande   MSA PRADO 120 SERIES LEFT STORAGE DRAWER SYSTEM-E930-PRA120-LE-COM SUITS: Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande (models with rear aircon) Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 PRADO 150 SERIES DOUBLE STORAGE DRAWER SYSTEM-E930-PRA150-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA PRADO 150 SERIES LEFT STORAGE DRAWER SYSTEM-E930-PRA150-LE-COM SUITS: Toyota Landcruiser Prado 150 Series GXL 7 Seat Model/Kakadu/VX (No removable front face panel) Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

SUITS: Toyota Landcruiser Prado 150 Series GXL 7 Seat Model/Kakadu/VX (No removable front face panel) Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

N70 1KD Hilux High Flow Airbox package. The Fatz Built N70 Hilux Airbox is in the line of our latest generation of Airboxes. With All aluminium construction, factory rubber mounting and CNC machined MAF housing, this product will not disappoint. The N70 factory airbox outlet and MAF mounting leaves a lot to be desired form a flow perspective, with a very tight bend at the outlet of the box into the MAF tube. This also makes the integration of the MAF into a different tube with better flow characteristics a little challenging. We have spent a lot of time in testing and development on this product to ensure it is accurate. Our box will not cause any drive-ability or tuning issues. The Box has a 4″ inlet to couple with our snorkel or existing snorkels in the same location. The box is supplied with plumbing to the turbo inlet, for a bolt in, drive away experience, with all needed to fit out. The Airbox has a 10mm thick perspex lid to make filter inspections a breeze. The box houses our 9″ long filter element in either an 8 layer gauze or paper element. Both options well suited for off road applications. With ease of fitment, accuracy in construction and performance to match the quality. You will be happy with you Fatz built N70 Hilux Airbox package. Supplied with: Airbox, clear lid, filter, MAF housing, Plumbing to turbo inlet, instructions for fit out. NOT COMPATIBLE WITH SAFARI SNORKEL WITHOUT MODIFICATIONS TO THE AIRBOX NOTE:  Please note that some custom orders may require up to a 2-week wait for completion 

N70 1KD Hilux High Flow Airbox package. The Fatz Built N70 Hilux Airbox is in the line of our latest generation of Airboxes. With All aluminium construction, factory rubber mounting and CNC machined MAF housing, this product will not disappoint. The N70 factory airbox outlet and MAF mounting leaves a lot to be desired form a flow perspective, with a very tight bend at the outlet of the box into the MAF tube. This also makes the integration of the MAF into a different tube with better flow characteristics a little challenging. We have spent a lot of time in testing and development on this product to ensure it is accurate. Our box will not cause any drive-ability or tuning issues. The Box has a 4″ inlet to couple with our snorkel or existing snorkels in the same location. The box is supplied with plumbing to the turbo inlet, for a bolt in, drive away experience, with all needed to fit out. The Airbox has a 10mm thick perspex lid to make filter inspections a breeze. The box houses our 9″ long filter element in either an 8 layer gauze or paper element. Both options well suited for off road applications. With ease of fitment, accuracy in construction and performance to match the quality. You will be happy with you Fatz built N70 Hilux Airbox package. Supplied with: Airbox, clear lid, filter, MAF housing, Plumbing to turbo inlet, instructions for fit out. NOT COMPATIBLE WITH SAFARI SNORKEL WITHOUT MODIFICATIONS TO THE AIRBOX NOTE:  Please note that some custom orders may require up to a 2-week wait for completion 

Fatz High Flow N80 Hilux Airbox The Fatz built N80 Airbox incorporate our CNC machined MAF housing to retain factory air flow readings, a filter of your choice (8 layer oiled gauze or dry element paper in a 9 inch POD configuration), clear acrylic lid for a great look and easy checking of filter soiling. The box incorporates a duck valve drain to allow water to drain away from the filter, when ingested through the snorkel for peace of mind motoring. Mounting the airbox is taken care of by the factory mounting rubbers and fasteners. Plumbing from the air box outlet to the turbo inlet is comprised of silicone couplings and powder coated alloy pipe supplied as part of the kit. Supplied in all cases with filter, clear lid, plumbing from airbox to turbo inlet pipe in silicone and alloy pipe, and instructions to install. NOTE:  Please note that some custom orders may require up to a 2-week wait for completion 

Fatz High Flow N80 Hilux Airbox The Fatz built N80 Airbox incorporate our CNC machined MAF housing to retain factory air flow readings, a filter of your choice (8 layer oiled gauze or dry element paper in a 9 inch POD configuration), clear acrylic lid for a great look and easy checking of filter soiling. The box incorporates a duck valve drain to allow water to drain away from the filter, when ingested through the snorkel for peace of mind motoring. Mounting the airbox is taken care of by the factory mounting rubbers and fasteners. Plumbing from the air box outlet to the turbo inlet is comprised of silicone couplings and powder coated alloy pipe supplied as part of the kit. Supplied in all cases with filter, clear lid, plumbing from airbox to turbo inlet pipe in silicone and alloy pipe, and instructions to install. NOTE:  Please note that some custom orders may require up to a 2-week wait for completion 

N80 (GUN) Hilux Catch Can Bracket Gearing up for a clean catch: Introducing the N80 Catch Can Bracket for N80 Airbox-equipped Hiluxes Attention, automatic Hilux enthusiasts! Upgrade your engine protection with our N80 Catch Can Bracket, specifically designed to seamlessly integrate with your Fatz Built N80 Airbox. Say goodbye to compatibility headaches and hello to a clean, secure installation for your Provent or HPD Catch Can. Gone are the days of struggling with off-the-shelf brackets that clash with the sleek lines of your N80 Airbox. We’ve engineered this bracket to be the perfect companion, offering a hassle-free mounting solution that won’t compromise your engine bay aesthetics. Crafted from sturdy 3mm 304-grade stainless steel, this bracket is built to last. Professional TIG welding ensures a robust and reliable platform for your Provent or HPD Catch Can. No more rattling or vibrations, just pure performance and peace of mind. With the N80 Catch Can Bracket, you can: Protect your engine: Capture harmful blow-by gases and oil vapor before they contaminate your intake system, boosting engine health and longevity. Maintain a clean engine bay: The sleek design and precise fit keep your catch can neatly tucked away, enhancing the visual appeal of your Hilux. Enjoy effortless installation: Say goodbye to drilling and modifications. The N80 Catch Can Bracket bolts directly to existing mounting points, making installation a breeze. Invest in your Hilux with theCatch Can Bracket. It’s the perfect blend of functionality, aesthetics, and ease of use, ensuring your engine runs clean and your ride looks sharp. So ditch the compatibility headaches and upgrade to a seamless catch can solution that complements your Airbox. NOTE:  Please note that some custom orders may require up to a 2-week wait for completion 

The Direction-Plus™ Fuel Manager Pre-Filter + ProVent Combo Kit FMPV620DPC fits Toyota Prado 150 series 1KD-FTV (2009-2015) models. It’s the ultimate defence against carbon build-up and water contamination with the Fuel Manager pre-filter kit and up to 98% oil separation efficiency with our ProVent kit. With this dual kit you can‘t go wrong! Protect your investment 24 hours a day, 365 days a year. HOW IT WORKS FUEL MANAGER Direction Plus™ Pre-Fuel Filter will be installed between the fuel tank and the O.E.M fuel filter which will remove the majority of water and particle contamination, leaving the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system. PROVENT OIL SEPARATOR Direction Plus™ ProVent oil separator protects your diesel engine by reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus™ ProVent system is specifically designed to separate and redirect oil and air from blow-by gas produced from within the crankcase as it also provides the option of returning the oil back to the sump.

Maximise engine efficiency with the premium Direction Plus Fuel Manager Pre-filter and Provent Combo Kit. Hilux and Fortuner N80. Unbeatable quality for your vehicle

Did you know that Australia is one of the only countries in the world to have sports bars standard on most vehicles? That’s why HSP created the Armour Bar. A purpose-built sports bar, a completely individual design using only the best materials to achieve a beautiful, functional, and premium sports bar. Light Weight The Tub is essentially the whole reason you purchased a Ute so when designing the Armour bar HSP wanted to ensure that it was as light weight and non-invasive as possible. The clear choice was alloy, it weighs about half of any comparable steel bar, meaning less stress on your tub and a higher payload. Anti Rust Design Unlike steel sports bars, the front and rear of the Armour Bar contain almost no iron, and without iron, there is no rust. Any non-alloy parts such as brackets and bolts are either powder coated or have anti-rust protection. Middle Curve Extension The Armour Bar’s rear legs start from the middle and curve out towards the rear. This not only looks great but gives you the ability to centre mount lightweight accessories such as spotlights Premium Powder-Coated Finish The Armour bar comes standard with a premium matte powder-coated finish. Not only does this look and feel sensational but when compared to a painted or polished finish, powder coat is best for withstanding the elements. Compatible with Roll R Covers The Armour Bar looks fantastic on any dual cab naked tub. However, for anyone who has a HSP Roll R Cover S3 and above, HSP now have a mounting kit to adapt your Armour bar on. Each bar has been specifically designed to sit perfectly in line with your cabin. Compatibility TOYOTA HILUX

The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle. Easy Installation Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free. Two-Way Strut System The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift. Compatibility TOYOTA HILUX

The HSP Tail lock is truly a revolutionary product allowing you to sync your tailgate with your existing vehicle remote. Installation takes less than an hour as there is no drilling required along with simple wiring. The Tail Lock gives peace of mind knowing that when your car is locked, so is the tailgate.   Features Syncs with factory remote Hidden non-intrusive design Works with proximity remote Gives ultimate security for your tub   Fitting DIY Installation (DIY Instructions) No drilling required Simple wiring does not require an auto electrician   Warranty 1 Year Warranty

The HSP Tail lock is truly a revolutionary product allowing you to sync your tailgate with your existing vehicle remote. Installation takes less than an hour as there is no drilling required along with simple wiring. The Tail Lock gives peace of mind knowing that when your car is locked, so is the tailgate.   Features Syncs with factory remote Hidden non-intrusive design Works with proximity remote Gives ultimate security for your tub   Fitting No drilling required Simple wiring does not require an auto electrician

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years