POLYAIR Standard Red Series Airbag Kit, Land Rover Defender -...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Landrover - Defender 130 1983 - 2016, 4 COIL REAR
POLYAIR Standard Red Series Airbag Kit, Land Rover Discovery -...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Landrover - Discovery Series 2 1989 - 1998
POLYAIR Standard Red Series Airbag Kit, Jeep Grand Cherokee -...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Jeep - Grand Cherokee WJ - WG V8, 1999 - 2004
POLYAIR Standard Red Series Airbag Kit, Land Rover Discovery -...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Landrover - Discovery Series 1 1989 - 1998,Landrover - Range Rover Classic 1970 - 1996Landrover - Range Rover P38/V8 1994 - 2002
POLYAIR Standard Red Series Airbag Kit, Nissan Patrol - 92094
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- suspension bottoming out- rough ride- excessive sway & body roll- unpredictable braking characteristics- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-35psi- Tough moulded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Nissan - Patrol Y62 - 2013-on
POLYAIR 2" Lift Red Series Airbag Kit, Mitsubishi Pajero -...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Mitsubishi - Pajero 2000 - on , NM, NX,
POLYAIR 2" Lift Red Series Airbag Kit, Nissan Patrol -...
$405.00
POLYAIR LOAD ASSIST AIR SPRING To Suit
Nissan Patrol
GQ - GU LWB/Coil Spring Cab Chassis with 2'' Raised Suspension
Load assist air spring kits are the easy, affordable way to keep your vehicle level and your ride smooth regardless of load or road condition. A level, stable vehicle means better braking, steering, and headlight aim. Load assist air springs also reduce sway, “porpoising” and bottoming out while maximizing ride comfort.
The kit includes two durable, easy to install air springs that provide a load leveling capacity up to 450 Kg. Designed to work together or interdependently, these two air springs support your vehicle’s rear suspension. By using load assist air bags you can guarantee a safe, smooth and level ride every time.
Air Lift 1000 air springs fit inside your front or rear coil suspension or between leaf spring and chassis rail to provide suspension support when and where you need it.
The Polyair kit does not replace the original coil spring but works with it, original springs tend to sag from wear or from overloading.
Simply add air to the air springs when hauling a heavy load to ensure that your vehicle is level and stable. Then, deflate when you are driving with an empty load for better ride quality.
For all 4WD, Work vans, Twin Cabs and Cars, the springs are fully adjustable from 5 to 35 PSI via air line tubing.
The kit includes 2 air springs, quick-connecting user-friendly air fittings, brackets, air lines and all of the hardware you need. To install, just fit the air springs inside your vehicle’s coil springs when they are deflated and malleable. We engineer all of our kits to be installed easily and each kit comes with a fully illustrated, easy-to-follow instruction manual.
Air Lift 1000 air springs can be inflated to the same pressure simultaneously through a single air line tube. Or, they can be inflated to different air pressures through dual air line tubes.
All Air Lift adjustable air springs are made with rugged, durable components and feature high burst strength. Our air spring kits are backed by a one year 20,000 km replacement warranty providing you have installed them correctly and used the correct operating pressure.
AOBAB900 series
Air assist springs fit inside your front or rear coil suspension or between leaf spring and chassis rail to provide suspension support when and where you need it. Simply add air to the air springs when hauling a heavy load to ensure that your vehicle is level and stable. Then, deflate when you are riding empty for better ride quality.
AOBAB900 series
Some air kits are supplied with 2 new springs to replace the original ones.
AOBAB900 series
Show is the two supplied Schroeder valves for inflating and deflating you air assist bags.
POLYAIR 2" Lift Red Series Airbag Kit, Land Rover Defender...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Landrover - Defender 110 1983 - 2016
POLYAIR 2" Lift Red Series Airbag Kit, Toyota Fortuner -...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Kia - Sorento 2007 - 2009
Toyota - Fortuner 2015-on - GUN156 4WD
POLYAIR 2" Lift Red Series Airbag Kit, Nissan Patrol -...
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Nissan - Patrol Y62 - 2013-on
POLYAIR 2" Raised Red Series Airbag Kit, Ford Everest -...
$405.00
Vehicle Fitment: Ford Everest - 2015-2022
Product Information
Series: Red Series
Vehicle Application: 2" Raised
Polyair Red Series Load Assist Kits
Experience smoother rides and enhanced vehicle performance with the Polyair Red Series load assist airbag kits, meticulously crafted to complement coil sprung vehicles. Whether you're loading up the rear end with cargo or towing a caravan or trailer, the inevitable drop in the rear end can introduce a slew of safety and handling concerns.
Symptoms may include:
Suspension bottoming out
Rough ride quality
Excessive sway & body roll
Unpredictable braking behavior
Poor headlight alignment
But fear not! Installing a set of Polyair Red Series airbags can alleviate these issues effectively. These airbags boast adjustable air pressure, granting you the flexibility to fine-tune support levels according to varying load types and weights.
While having a properly sprung vehicle for consistent loads is advisable, most coil springs are overrated for everyday use, resulting in a bumpy and uncomfortable ride when not fully loaded. The Polyair Red Series offers a solution by allowing you to maintain smooth OEM ride comfort when unloaded and effortlessly adjust pressure when towing or hauling. It's simplicity at its finest.
Key Features:
Air adjustable pressure ranging from 5 to 35 psi
Robust molded polyurethane construction for durability
Simple installation using standard tools
User-friendly, illustrated instructions for hassle-free setup
Convenient quick-connecting air fittings for ease of use
Backed by a generous 2-year, unlimited kilometer warranty, the Polyair Red Series ensures peace of mind and reliable performance for your journeys ahead.
FRONT RUNNER Expedition Perimeter Rail Kit - For 1560Mm (L)...
$363.60
$404.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1165mm (45.9") W x 63mm (2.5") H
Weight:4.63 kg (10.2 lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1762Mm (L)...
$363.60
$404.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:5 kg (11 lbs)
MSA 4X4 Ford Ranger Py Dual Cab Xl/Xls Rear Seat...
$363.60
$404.00
MSA 4x4 Ranger PY Dual Cab XL/XLS Rear Seat Covers- 21042
Dual Cab XL/XLS Bench Seat with 3 x Head Rests and No Armrest, Child Seat Holes on Base
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Bt50 Xt/Xtr/Gt Dual Cab Rear Seat Covers- -...
$363.60
$404.00
VEHICLE DATE: 09/2020-Current
PRODUCT TYPE: Canvas Seat covers
SUITS: BT50 XT/XTR/GT Dual Cab
2nd row, 60/40 base with 3 headrests and no armrest
MSA 4X4 D-Max Sx/Ls/Xterrain Second Row Seat Covers- - 21002
$363.60
$404.00
VEHICLE DATE: 09/2020-Current
PRODUCT TYPE: Canvas Seat covers
SUITS: D-MAX SX/LS/Xterrain
Dual Cab, second row, 60/40 base, 3 headrests and no armrest
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA Toyota Hilux Hi-Lux Ln167 Workmate 2Wd Front Full Width...
$363.60
$404.00
Front Full Width Bench.
Year: 08/97-04/05
Model: LN167 WORKMATE 2WD
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Hilux 7Th Gen Sr5 Single /Extra/Dual Cab Rear...
$363.60
$404.00
Rear & Dual Cab Full Width Bench (3 Head Rests).
Year: 11/13-10/15
Model: 7th Gen SR5 Single, Extra & Dual Cab
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Rear
MSA Nissan Navara D23 (Np300) Seat Cover Sl / St...
$363.60
$404.00
Rear Bench, 2 Headrests, Seat Belt Coming Out of Base. Year: 01/18-CURRENT Model: NISSAN NAVARA D23 (NP300) / SL / ST / STX Series 3
SPECIFICATIONS: Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm Position: Rear
MSA Ford Ranger Px Rear Full Width Bench Seat Cover...
$363.60
$404.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Rear
DIRECTION-PLUS Universal 10Mm Ryco Pre-Filter Kit () - RC801DPK
$362.70
$403.00
The Universal Ryco Pre-Filter Kit RC801DPK, comes with a 10 micron element + bracket + 12mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles.
PROTECT YOUR ENGINE
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water.
HOW IT WORKS
Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A RYCO PRE-FILTER KIT:
Isolate water before it journeys through your fuel system causing damage.
Protect your fuel system from corrosion of metal components that left unaddressed
can cause expensive damage to your fuel system.
Reduce micro-bacterial growth caused by water contamination, which can reduce
engine durability and performance.
Remove other contaminants down to 10 microns, meaning your OE filter does not
have to work as hard.
Water resistant silicone coated filter media provides maximum efficiency, life and flow
Maximum working Pressure 87 PSI/6 bar/600 kPa
Give you a visible or audible alert to water in your fuel system allowing you to take
action to protect your engine (when used with S102XK and S101X accessories).
Allow you to easily drain water from your fuel system multiple times to get to safety
or a mechanical workshop.
Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards
Check fitment guide below to confirm suitability for your vehicle.
FRONT RUNNER Expedition Perimeter Rail Kit - For 1358Mm (L)...
$360.90
$401.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1475mm (58.1") W x 63mm (2.5") H Weight:4.57 kg (10.1 lbs)
FRONT RUNNER Canopy Load Bar Kit / 1345Mm - KRCA010
$360.90
$401.00
The Canopy Load Bar Kit was made for travelers who need additional canopy storage capacity, but don’t want to sacrifice a low-profile build. These 1345mm bars use the same durable aluminum slats as the Slimline II Roof Rack, allowing you to mount Front Runner accessories.
Comes with all hardware and components needed to fit load bars on a vehicle, including four (4) mounting feet, two (2) 1345mm load bars, an installation kit and fitting instructions.
These load bars are mounted to your canopy via a set of supplied mounted feet.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack.
Made from steel and durable, weather-resistant black powder-coated aluminum.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCA0010 - Canopy Load Bar Kit / 1345mm - by Front Runner
Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK015 - Roof Load Bar Pair 1345mm(W)
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 6kg (13.23lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 110mm (4")Length: 1455mm (58")Height: 135mm (6")
Shipping Weight:Weight: 5.18kg (11.42lbs)
DIRECTION-PLUS Universal 8Mm Fuel Manager Pre-Filter Kit () - FM804DPK
$360.90
$401.00
The Universal Fuel Manager Pre-Filter Kit FM804DPK, comes with a 30 micron element + bracket + 8mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. It is designed specifically to cope with extreme weather conditions and poor fuel quality.
PROTECT YOUR DIESEL ENGINE AGAINST WATER AND PARTICLE CONTAMINATION
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
FUEL MANAGER: HOW IT WORKS
When you install the Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter, Fuel Manager will remove most of the contamination by particles and water present in the diesel fuel.
HIGH LEVEL PROTECTION
As a result, the O.E.M fuel filter will do the final and finer filtration. Therefore, this ensures you are maximising the protection of your diesel fuel system.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Fm620Dpk Dp 30 Kit For Nissan Patrol 3.0L -...
$360.00
$400.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
ALPINE 8-Input Accessory Controller Module - KAC-001
$359.96
$399.95
8-Input Accessory Controller Module
Simplify and declutter your vehicle’s dashboard by controlling accessories like winches, spotlights, light bars, or even air suspension directly from your Alpine touchscreen!
The KAC-001 Accessory Control Module transforms your compatible Alpine Display Audio Receiver into a central hub for managing a variety of 12V electrical accessories. With eight individual outputs, you can control relay-connected accessories configured as Pulsed, Latched, or Momentary Outputs. Additionally, you can customise graphical icons and names for each accessory for easy identification on your screen.
*While the KAC-001 doesn’t need a Maestro module to operate, it does require a Maestro-compatible head unit, such as the iLX-F511Ai, iLX-F509Ai, or iLX-507Ai.
ALPINE R Series 8" Subwoofer Box ( Ported ) -...
$359.96
$399.95
Award winning SBR-S8D4, named INCAR SUBWOOFER OF THE YEAR – LOADED ENCLOSURE for 2017.
The SBR-S8D4 features Alpine’s Type-R 8″ subwoofer in a custom slot ported enclosure. Ideal for installation in small spaces, its compact size means it can fit virtually anywhere.
The pre-installed subwoofer employs many features typically found in larger models, such as Alpine’s H.A.M.R (High Amplitude Multi Roll) suspension. This unique design allows greater linear excursion while improving control, to achieve maximum output and outstanding sound quality.
Designed to achieve optimal output, the carpeted enclosure features heavy duty MDF construction. Plus, stylish brushed aluminium laminate and a robust grill create the perfect balance of stunning aesthetics and practicality.
Features
900W Peak Power
300W RMS Power (4ohm)
High Amplitude Multi Roll (HAMR) surround
Frequency Response: 28Hz – 400Hz
USA Designed Slot Ported Subwoofer Enclosure
Heavy Gauge Spring Terminals
Dimensions: (L x W x H cm) 49 x 29 x 16
R2-W8D4 Pre-installed
Grille Included and Pre-Installed
Specifications
Subwoofer Size: 8″
Power Handling (RMS/Peak): 350W/1000W
Power Range (RMS): 150W-350W
Frequency Response (Hz): 28Hz-200Hz
Diaphragm Material: Kevlar-Reinforced Pulp Fiber
Diaphragm Design: 2-piece structural parabolic
Surround Material: Injection molded santoprene
Surround Design: High Amplitude Multi-Roll (Patent Pending)
Spider Material: Nomex
Spider Design: Progressive
Voice Coil Material: 180˚C High Temp Wire on Spiral Cut Aluminium Former
Voice Coil Design: 4-Layer Dual Voice Coil
Motor Structure Pole Geometry: Compound Radius Curve
Motor Structure Configuration: Integration Shorting Sleeve with Radial Vented VC Head Transfer
Magnet Material: High-Power Strontium Ferrite
Magnet Configuration: 6-Piece (8″) / 10-Piece (10″/12″) Radially Segmented, Double Stacked
Frame Material: Cast Aluminium
Frame Design: Single-Piece Casting with Airflow Management System
Terminals Layout: One sided
Terminals Design: Heavy Duty 8ga, Push with housing, Banana Sockets for VC Configuration Jumpers
Tinsel Leads Design: Reinforced Layer Spider Integration
Gasket Design: Concealed Mount Gasket System and Integrated Grill Ready
ELECTRO-MECHANICAL PARAMETERS
Nominal Impedance: 2ohms+2ohms (4ohms at terminal)
Frequency Response: 28-200Hz
Sensitivity (SPL @ 1W/1m): 83.5dB
D.C Coil Resistance (Re): 1.85ohms +1.85ohms
Inductance (Le) 1kHz/20kHz: 0.87mH/0.30mH
Free Air Resonance (Fs): 38Hz
Equivalent Stiffness (Vas): 12L (0.42 ft³)
Mechanical Q (Qms): 7.8
Electrical Q (Qes): 0.55
Total Q (Qts): 0.50
Xmax10 (One-Way Xmax @ 10% Distortion): 14mm
Mechanical Excursion, Peak-to-Peak: 52mm
Gap Height (Hag): 10mm
Coil Height (Hvc): 29mm
Cone Area (Sd): 201 cm²
Voice Coil Diameter: 40mm (1.6″)
Magnet Weight: 52oz
ALPINE S2-Series 8" Prisma Subwoofer Enclosure -S2-Sb8 - S2-SB8
$359.96
$399.95
Alpine's PrismaLink S2-Series subwoofer enclosures combine great Alpine bass with stunning visual appeal. Integrated RGB lighting bars make your system look as good as it sounds while rugged built-in S2-Series subwoofers deliver the sonic goods. The rugged MDF box with carpet covering stands up to the stresses of car life, and its wedge-shaped design allows it to fit in more places.
Lighting and multi-sub options
The pre-wired dual RGB lighting bars can be controlled by the included wireless remote or through the screen of the Alpine ILX-W670 receiver (sold separately). You can link multiple S2-S8B enclosures with the optional KTX-LK8 bracket for a kaleidoscopic multi-sub system. For the final touch, a twist-lock mounting system makes it easy to add one of Alpine's specially-designed speaker grilles (sold separately).
Big bass from a 8" sub
This S2-SB8 features Alpine's S2-W8D4 subwoofer with dual 4-ohm voice coils wired for 2-ohm impedance. Its carbon fiber/polypropylene cone and HAMR multi-roll rubber surround deliver powerful bass. It handles up to 300 watts of RMS power (900 watts peak), so you can feed it plenty of power.
READ LESS
Product highlights:
sealed enclosure with one S2 Series 8" woofer
MDF enclosure with carpet covering
carbon fiber/polypropylene cone with ceramic/polypropylene dust cap
High-Amplitude Multi-Roll (HAMR) rubber surround
integrated RGB lighting bars
linkable to additional S2-SB8 enclosures with KTX-LK8 linking kit (sold separately)
includes twist-lock surround trim ring
2-ohm total impedance
power handling: 300 watts (900 watts peak)
frequency response: 35-215 Hz
sensitivity: 83 dB
dimensions: 12.5"W x 11"H x 9.25"D1 x 4.25"D2
warranty: 1 year
MFR # S2-SB8
Item # 500S2SB8
What's in the box:
Linkable ported enclosure loaded with one S2-W8D4 subwoofer
IR Remote control (CR2025 battery NOT included)
6" RGB wiring harness
Instruction sheet
Product registration information
Warranty information
Important notice
ALPINE 8" Quad-Coil Subwoofer System - PWE-S8
$359.96
$399.95
The stylish all-new ALPINE 8" Performance Quad-Coil Subwoofer System - PWE-S8 lets you add deep, accurate bass to your system without taking up any valuable space in your car.
Despite its ultra-compact size coming in at 340mm wide, 230mm tall and just 75mm deep, the high-excursion 8-inch subwoofer gives a strong 120W RMS of bass output. This compact subwoofer is designed to work well virtually anywhere in a vehicle, even under a seat.
Plus, it’s cast metal construction makes it ultra-durable without sacrificing any performance. Moreover, you’ll also find an input for a wired remote that lets you adjust your bass level easily from the driver’s seat.
The side panel offers easy access to RCA and auto-sensing speaker inputs. The side panel also gives access to Phase, Gain, LP Crossover and Remote Sub Level controls for greater flexibility during installation.
Features
Compact Powered Subwoofer
Mounting Hardware Included
Remote Bass Level Knob Included
Specifications
Built-In Amplifier (120W RMS/240W MAX)
8” Subwoofer with High-Excursion Cone
Durable Cast Metal Construction
Dimensions: 340mm W x 230mm H x 75mm D
Weight: 4.6kg
Frequency Response: 25 ~ 152Hz
Variable Low-Pass Crossover: 80 ~ 200 Hz
Variable Phase Control: 0°/180°
RCA (0.1-4V) / Speaker Input (1.5-30V Auto)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1358Mm (L)...
$359.10
$399.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1358mm (53.5") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:4.5 kg (9.9 lbs)
DIRECTION-PLUS Fm801Dpk Universal 30Mic 10Mm Fittings Pre-Filter Kit - FM801DPK
$359.10
$399.00
Direction-Plus™ Universal Diesel Fuel Pre-Filter Kit protects late model common rail diesel engines against costly injector failure it is designed specifically to cope with extreme weather conditions and poor fuel quality.
WHY IS IT IMPORTANT?
The Pre-Filter will remove the majority of water and other contaminants from Ultra Low Sulphur Diesel (ULSD) which leaves the O.E.M fuel filter to do the final and finer filtration and ensures you are maximising the protection of your diesel fuel system.
FRONT RUNNER Volkswagen T5/T6 Transporter Ladder - LAVT003
$358.20
$398.00
Easily access the roof rack on your Volkswagen T5/T6 Transporter with this neat, off-road tough, four-step ladder. It was specially designed to fit your van and is made from high-strength, powder-coated steel and aluminium.
A four (4) step ladder that bolts to the left side of the rear of the Volkswagen T5/T6 Transporter vans.
Made from high-strength steel and aluminium.
Powder coated in the same durable black powder coating as all Front Runner racks.
Clamps around the top of the door and secured to the bottom of the door either by bolting for a permanent fixture* or by using the clamp plate for a temporary installation.
Supplied with installation hardware and fitting instructions.
Note: This ladder is not suitable for right side rear door fitment, high roof Transporter vans or Transporter Vans with barn doors.
*Permanent fixture and chrome trim models requires drilling for installation. See fitting instructions for further details.
Consists of:1x Volkswagen T5/T6 Transporter LadderInstallation Hardware Fitting Instructions Materials used:Black powder coated aluminium & steelProduct Dimensions:400mm (15.7") L x 262mm (10.3") W x 1448mm (57") HWeight:5.64kg (12.4lbs)
DIRECTION-PLUS Provent Oil Separator Kit Ford Ranger - PV665DPK
$358.20
$398.00
Direction-Plus™ ProVent® oil separator kit PV665DPK suits Ford Ranger P5AT model and it is mounted on the radiator support panel. The ProVent® oil separator kit PV665DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
HOW IT WORKS
Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
FRONT RUNNER Expedition Perimeter Rail Kit - For 1358Mm (L)...
$357.30
$397.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1345mm (53") W x 63mm (2.5") H Weight:4.38 kg (9.7 lbs)
DIRECTION-PLUS Universal 8Mm Ryco Pre-Filter Kit () - RC804DPK
$356.40
$396.00
The Universal Ryco Pre-Filter Kit RC804DPK, comes with a 10 micron element + bracket + 8mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles.
PROTECT YOUR ENGINE
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water.
HOW IT WORKS
Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A RYCO PRE-FILTER KIT:
Isolate water before it journeys through your fuel system causing damage.
Protect your fuel system from corrosion of metal components that left unaddressed
can cause expensive damage to your fuel system.
Reduce micro-bacterial growth caused by water contamination, which can reduce
engine durability and performance.
Remove other contaminants down to 10 microns, meaning your OE filter does not
have to work as hard.
Water resistant silicone coated filter media provides maximum efficiency, life and flow
Maximum working Pressure 87 PSI/6 bar/600 kPa
Give you a visible or audible alert to water in your fuel system allowing you to take
action to protect your engine (when used with S102XK and S101X accessories).
Allow you to easily drain water from your fuel system multiple times to get to safety
or a mechanical workshop.
Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards
Check fitment guide below to confirm suitability for your vehicle.
FRONT RUNNER Drop Down Tailgate Table – Vehicle-Mounted Foldable Table...
$355.50
$395.00
Get more table space for food prep, work, or play quickly and easily from your tailgate. This adventure-ready Drop Down Tailgate Table mounts to the rear swing door of Jeep JK/JKU/JLs and some SUV’s including the New Defender and trucks that have rear swing opening doors. The single latch helps securely stow the table away until the next adventure.
Fits to the interior of your Jeep JK/JKU/JLs and the New Defender. As well as some SUVs and Trucks with rear swing opening doors.
Fits both left-hand & right-hand opening doors.*
Opens downward when the latch is released and is supported by 2 sliding stays.
Load rating 40kg (88.2lb).
The primary tray has a surface area of 648mm (25.5") L x 331mm (13") W.
The table surface area can be increased by an additional 445mm (17.5") in length by sliding out the 16mm work surface extension. This table tray extension can be changed to open either to the left or right.
The latch keeps the table secure and rattle-free with the help of 4 adjustable stoppers.
Made from steel and sealed with the same durable, weather-resistant black powder coating as the Front Runner Racks.
Includes all necessary installation hardware and fitting instructions.
*Works with Jeep Wranglers JK, JKU, JLs and the New Defender. For compatibility with other SUVs, Trucks, and Trailers, an appropriate sized door panel/card or flat steel surface of 685mm (27") L x 376mm (14.8") W is needed. Drilling is required. Please see fitting instructions for further details.Note: This Drop Down Tailgate Table is only suitable for exterior fitment if the bamboo is treated regularly. To treat the bamboo, bees wax and mineral oil is recommended.Note: This Drop Down Tailgate Table cannot be installed together with a Land Rover New Defender 110 (L663) Cargo Slide.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:1 x Table AssemblyInstallation HardwareFitting Instructions
Product Dimensions:Closed Dimensions:672mm (26.5") L x 65mm (2.6") W x 344mm (13.5") HWidth including latch: 85mm (3.3")
Fully Opened Dimensions:1119mm (44.1") L x 350mm (13.8") W x 384mm (15.1") H
Weight:9.19kg (20.3lbs)
Load Rating:40kg (88.2lbs)
LIGHTFORCE Viper 20" Double Row Light Bar - LFLB20D
$355.50
$395.00
We've got something that'll light up your off-road world like a bonfire on a starry night – the Lightforce 20-inch Dual-Row LED Light Bar. Hold onto your hats because this ripper of a light bar is an absolute game-changer.
Aussies love their wide-open spaces, and this Lightforce light bar is here to ensure you see every inch of it. It's part of the new and affordable VIPER range, slimmer and lighter– up to 25% less weight. But don't let its lightweight nature fool you; it's tougher than a hungry croc.
The Lightforce VIPER Light Bar rocks a screwless bezel design, making it a piece of cake to integrate seamlessly with your rig. You'll have that factory look you're after, which fits like a glove on your 4x4. No worries about water getting where it shouldn't either, with a water-tight IP68/69K rating.
It also comes with the exclusive "smart harness". It's got a built-in bridge rectifier, making it a breeze to connect to modern vehicles. It also has marine-grade, stainless steel side brackets that'll last longer than your rig. But that's not all – bonus rear slide mounts are thrown in for extra mounting options.
The 20" Dual-Row Light Bar will complement your spotlights, giving you a wider beam to conquer those dusty trails. No more ear-splitting interference with your AM or UHF radio – this beauty has your back.
Specs and Features:
Beam strength: 1 LUX @ 984 meters
SMART Harness included
Marine Grade Powder Coat
Waterproof with IP68/69K rating
Slim and lightweight design (25% lighter)
Screwless bezel for seamless integration
Exclusive "smart harness" for modern vehicles
Bonus rear slide mounts for extra options
Wide beam for enhanced visibility
Minimal radio interference
TJM Northern Beaches Expert Tip -When it comes to 4WD lights like this ripper from Lightforce, remember to give 'em a quick check before you hit the dusty trail. Make sure they're clean and secure. It'll ensure you're never caught in the dark.
What others are saying about this product
‘’Just quality.’’
FRONT RUNNER Toyota Sequoia (2023-Current) Ladder - LATS001
$353.70
$393.00
This strong steel ladder fits onto the Toyota Sequoia's tailgate, giving you easy access to the gear on your roof rack.
This ladder fastened over the top of the tail gate and drilled at the bottom.
The ladder has 5 steps.
Length from the bottom step to the top step is 1100mm / 43.3"
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Consists of:1 x Top Step Assembly2 x Upper Side Rail2 x Outer Joiner Plate2 x Lower Side Rail2 x Inside Joiner Plate1 x Bottom Step3 x 190mm Ladder Rung1 x Bottom Clamp1 x Lower Mounting Plate1 x Left hand Top Mounting Bracket1 x Right hand Top Mounting BracketInstallation HardwareFitting InstructionsMaterials used:Black powder-coated high strength steelProduct Dimensions:200mm (7.9") L x 655mm (25.8") W x 1101mm (43.3") HWeight:6.1Kg (13.4lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1358Mm (L)...
$351.90
$391.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Rail Left Hand & Right Hand Drop sets. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Please note that the new Expedition Rail LH + RH Drop sets Expedition Rail LH & RH Drop Set replace the old Expedition Rail Corner sets Expedition Rail Corner Set (Pair), which result in gaps between the rail corners.
Additionally, the side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.
DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back -1255mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1358mm (53.5") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:4.26 kg (9.4 lbs)
DIRECTION-PLUS Ryco Pre-Filter Wireless Sensor Kit () - S102XK
$351.00
$390.00
Long gone are the days of scheduling unnecessary fuel water separator inspections. Traditionally pre-filters rely on a visual inspection of the bowl and draining when full. With the NEW Ryco S102XK Fuel Pre-Filter Sensor Kit, simply log into the Ryco Connect App or let the Ryco Bluetooth Sensor Indicator let you know when it’s time to drain the unit. All of this adds an extra layer of protection for your diesel engine’s sensitive fuel system.
The Ryco S102XK Pre-Filter Sensor Kit comes with all the parts necessary for users to be notified instantly by the Ryco Connect App when it is time to inspect and drain the unit, eliminating unnecessary visual assessments.
Having a fuel water separator can assist your vehicle’s fuel system by filtering water and particulates before they ever reach the fuel filter, however, this is only working if the fuel water separator itself is clean and serviced regularly. What the Ryco Fuel Water Separator Sensor Kit does is support this line of defence, providing additional assurance to 4×4 owners that their engine health is protected by being better aware of what the fuel water separator’s servicing needs are. Ryco has also introduced the S101X Bluetooth Sensor Indicator, a hands-free optional accessory to accompany the Fuel Water Separator Sensor Kit, providing an in-cabin audio-visual alert notifying drivers when it is time to service their fuel water separator.
The Bluetooth Sensor Indicator is powered by the traditional auxiliary 12/24V power adaptor or modern USB-A port and will operate even when the Fuel Water Separator Sensor Kit is connected to the Ryco Connect app, never interfering with app notifications if you are wanting to use both.
BENEFITS OF A RYCO PRE-FILTER KIT:
Be notified instantly through the Ryco Connect App when it’s time to drain the unit
Remote filter monitoring via Bluetooth
Connect remotely to your smartphone with the Ryco Connect app or in the cabin with the Ryco Bluetooth Sensor Indicator
Easy Installation. No drilling through the firewall to run wires
Fits all common fuel water separator brand filters (Adapters included)
Kit comes with fuse taps to provide ignition-on power rather than wiring a separate circuit
Expandable, system allows for the connection of 2 sensors
IP67 rated to resist dust and water protection against harsh driving conditions
Suitable for 12/24 volt systems with automatic voltage detection
S102XK PRE-FILTER ADAPTORS:
The S102XK Kit comes with various adaptors to suit upgrades to all RYCO Pre-Filters and other popular fuel pre-filters.
All adaptors also come with a built-in drain, allowing you to simply drain water from the fuel system.
ADAPTORS COMPATIBLE WITH:
Ryco Z980, Z980S, Z981, Z982 Series
Fuel Manager 31863, 31871 & 36693
Mann+Hummel Preline PL150
Dolandson P551615, P550588 & P551426
Stanadyne 37281
Fleetguard FS1069
Baldwin BF7956D
NAPA 3694
WIX 33694
FRONT RUNNER Expedition Perimeter Rail Kit - For 1358Mm (L)...
$350.10
$389.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1165mm (45.9") W x 63mm (2.5") HWeight:4.13 kg (9.1 lbs)
FRONT RUNNER Narrow Slat / 1475Mm (Pair) - RRNS1475
$350.10
$389.00
These slats can be added to a Slimpro Van Rack to create a custom configuration, additional support and extra mounting points.
All hardware and brackets are included to fit to your existing Slimpro Van Rack
These slats will work with any Front Runner Slimpro Van Rack that uses 1475mm slats.
Features T-slots on both the top and bottom faces.
The T-slots allow for quick fitting and removal of accessories and equipment.
Made from the same black powder-coated aluminum as all Front Runner Racks.
Features
Consists of:
1 x Pair of Narrow Slats / 1475mm
Installation Hardware
Materials used:
Black powder coated aluminium
Product Dimensions:
1469mm (57.8") L x 60mm (2.4") W x 23mm (0.9") H
Weight:
4.4kg (9.7lbs)
FRONT RUNNER Pro Bed Water Kit / 20L - PBAC011
$350.10
$389.00
Water must be easily accessible when on the road in your rig. That is exactly what the lockable Pro Bed Water Kit offers, as it attaches to the side of your Pro Bed System, 20 litres of water at your disposal.
This Pro Bed Water Kit / 20L bolts on the side of the Pro Bed System.
Install this mount onto your Pro Bed System to allow quick and easy access to your 20L Pro Water Tank.
Easily remove your water tank by loosening the stainless-steel eye nuts.
The water tank can be locked for added peace of mind using the Rack Accessory Lock / Small (sold separately).
Plastic alignment spacers protect, align and secure your water tank.
Mounting holes could be used mount other accessories to your Pro Bed System or Pro Bed Rack Kit.
As a recovery solution, the Pro Bed Recovery Bracket is available.
Made of high strength steel and coated in the same durable, weather-resistant black powder coating as the Front Runner Rack.
Features
Consists of:
1 x Pro Bed Universal Accessory Mount
1 x Universal Side Mount for Pro Water Tank / 20L
1 x Pro Water Tank With Tap / 20L
Installation Hardware
Fitment Guide
Materials used:
Black powder coated steel
Food grade BPA free polyethylene Water Tank
Assembled Product Dimensions:
470mm (18.5") L x 224mm (8.8") W x 490mm (19.3") H
Weight:
6.82kg (15lbs)
FRONT RUNNER Rsi Double Cab Smart Canopy Load Bar Kit...
$350.10
$389.00
Clear up precious interior space and still get your adventure gear anywhere with the help of these low-profile, lightweight Front Runner Load Bars for your RSI Double Cab Smart Canopy.
A set of Load Bars used to transport gear on the roof of your RSI Double Cab Smart Canopy. This low profile solution includes 4 mounting Feet, 2 1165mm Load Bars, installation kit and fitting instructions.
These Load Bars are mounted to the RSC Double Cab Smart Canopy via a set of supplied Mounted Feet.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCA009 - RSI Double Cab Smart Canopy Load Bar Kit / 1165mm - by Front RunnerConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK013 - Load Bar Pair 1165mm(W)2x RRAC921 - Canopy Rack Kit Installation SetMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 10.56kg (23.28lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1280mm (50")Height: 145mm (6")Shipping Weight:Weight: 5.2kg (11lbs)
FRONT RUNNER Canopy Load Bar Kit / 1255Mm (W) -...
$348.30
$387.00
Load up adventure sports gear such as bikes, kayaks, and fishing rods on your pickup truck’s canopy with these load bars. This Canopy Load Bar Kit is specially designed to fit on a shorter (1255mm) canopy via a set of supplied mounted feet without compromising the canopy. These load bars are compatible with a variety of Front Runner accessories thanks to the sliding bolt t-slots.
Comes with all hardware and components needed to fit load bars on your canopy, including four (4) mounting feet, two (2) 1255mm load bars, an installation kit and fitting instructions.
These load bars are mounted to your canopy via a set of supplied mounted feet.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack.
Made from steel and durable, weather-resistant black powder-coated aluminum.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCA012 - Canopy Load Bar Kit / 1255mm (W)Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK014 - Roof Load Bar Pair 1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.3kg (11.68lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1350mm (53")Height: 145mm (6")Shipping Weight:Weight: 6kg (13lbs)
LIGHTFORCE Viper 30" Single Row Light Bar - LFLB30S
$346.50
$385.00
The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts.
MSA Toyota Landcruiser Wagon 100 Series Stand Second Row Full...
$346.50
$385.00
Second Row Full Width Bench (2 headrests) (MTO)
Year: 01/98-12/07
Model: 100 Series STANDARD
Position: 2nd Row
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Nissan Navara D40Rx/ Dx Single King/ Dual Cab Rear...
$346.50
$385.00
Rear Dual Cab Full Width Bench. Year: 11/09-05/15 Model: NISSAN NAVARA D40 / RX / DX Single / King / Dual Cab
SPECIFICATIONS: Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm Position: Rear
MSA Nissan Navara D23 (Np300)Np300 Dx / Rx / St/...
$346.50
$385.00
Rear Bench. Year: 03/15-12/17 Model: NISSAN NAVARA D23 (NP300) DX / RX / ST / STX Series 3
SPECIFICATIONS: Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm Position: Rear
DIRECTION-PLUS Provent Kit To Suit Nissan Patrol Gu Zd30 -...
$345.60
$384.00
Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
