FRONT RUNNER Jeep Wrangler Jk 4 Door (2007-2018) Extreme Slimline...
$2,834.10
$3,149.00
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 4 door 2007-2018 including the Slimline II Tray (1425mm x 2368mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The JK Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
Features
KRJW003T - Jeep Wrangler JK 4 Door (2007-2018) Extreme Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAJK007 - Jeep Wrangler JK 4 Door Inner Brackets - by Front Runner
1 x FAJK008 - Jeep Wrangler JK 4 Door Foot Rails - by Front Runner
1 x FAJK009 - Jeep Wrangler JK 2 Door & 4 Door Front Pillar Brackets - by Front Runner
1 x RRSTJ12 - Slimline II Tray - 1425mm(W) X 2368mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 46kg (101lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1725mm (68")
Height 340mm (13")
Shipping Weight:
Weight 53.6kg (117.9lbs)
FRONT RUNNER Jeep Wrangler Jk 4 Door (2007-2018) Extreme Slimline...
$1,785.60
$1,984.00
This Slimline II 1/2 rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 4 door 2007-2018 including the Slimline II Tray (1425mm x 1358mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This sophisticated, rugged, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components and hardware needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The Front Runner JK Extreme mounting system is secured to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight or stress on the hardtop itself.
Features
KRJW004T - Jeep Wrangler JK 4 Door (2007-2018) Extreme Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FAJK007 - Jeep Wrangler JK 4 Door Inner Brackets - by Front Runner
1 x FAJK008 - Jeep Wrangler JK 4 Door Foot Rails - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (69lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 315mm (12")
Shipping Weight:
Weight 36.5kg (80.3lbs)
FRONT RUNNER Jeep Wrangler Jk 2 Door (2007-2018) Extreme Slimline...
$2,353.50
$2,615.00
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 2 door 2007-2018 including the Slimline II Tray (1425mm x 1762mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The JK Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
Features
KRJW001T - Jeep Wrangler JK 2 Door (2007-2018) Extreme Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAJK009 - Jeep Wrangler JK 2 Door & 4 Door Front Pillar Brackets - by Front Runner
1 x FAJK010 - Jeep Wrangler JK 2 Door New Foot Rails - by Front Runner
1 x FAJK011 - Jeep Wrangler JK 2 Door New Inner Brackets - by Front Runner
1 x RRSTJ09 - Slimline II Tray - 1425mm(W) X 1762mm(L) - by Front Runner
1 x WDST006 - Wind Deflector 45mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 37kg (82lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1725mm (68")
Height 400mm (16")
Shipping Weight:
Weight 43.1kg (94.8lbs)
FRONT RUNNER Jeep Wrangler Jk 2 Door (2007-2018) Extreme Slimline...
$1,425.60
$1,584.00
This Slimline II 1/2 rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 2 door 2007-2018 including the Slimline II Tray (1425mm x 954mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The JK Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
Features
KRJW002T - Jeep Wrangler JK 2 Door (2007-2018) Extreme Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FAJK010 - Jeep Wrangler JK 2 Door New Foot Rails - by Front Runner
1 x FAJK011 - Jeep Wrangler JK 2 Door New Inner Brackets - by Front Runner
1 x RRSTJ05 - Slimline II Tray - 1425mm(W) X 954mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 250mm (10")
Shipping Weight:
Weight 28.4kg (62.6lbs)
FRONT RUNNER Jeep Wrangler 4Xe (2021-Current) Slimline Ii 1/2 Roof...
$1,756.80
$1,952.00
This 1358mm/53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit for your Jeep Wrangler 4xe contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJW030T - Jeep Wrangler 4xe (2021-Current) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
1x LASS027 - Leg Spacer 6mm (Pair)4x LASS036 - Jeep JL/JT Mounting Leg / 170mm (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.7kg (72.09lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")
Shipping Weight:
Weight: 32kg (70lbs)
FRONT RUNNER Jeep Grand Cherokee Wk2 (2011-2021) Slimline Ii Roof...
$1,889.10
$2,099.00
This 1560mm/61.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Jeep Grand Cherokee WK2. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
An opening on the Foot Rails allows access to Front Runner under rack mount tables (either 1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG012T - Jeep Grand Cherokee WK2 (2011-2021) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAJG001 - Jeep Grand Cherokee Foot Rails
1x RRAC976 - Jeep Grand Cherokee WKII (2011-2020) Instal Kit
1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)
1x TRJG004 - Jeep Grand Cherokee WKII (2011-2020) Tracks/1450mm
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.25kg (77.71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 310mm (12")
Shipping Weight:
Weight: 36kg (79lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1255Mm(W)...
$1,459.80
$1,622.00
This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRGM009T - GMC Sierra 1500 (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.9kg (85.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18.0")
Length: 1730mm (68.0")
Height: 290mm (11.0")
Shipping Weight:
39.4kg (87.0lbs)
FRONT RUNNER Dodge Sprinter Van (2007-Current) Slimline Ii Roof Rack...
$3,879.90
$4,311.00
This 3120mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the Dodge Sprinter (2007+) contains 2 Slimline II Trays, Wind Deflector, Track set and 12 Mounting Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
6 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner2 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner1 x TRMS001 - Mercedes-Benz Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 61kg (135lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 455mm (18")Length 1800mm (71")Height 380mm (15")
Shipping Weight:
Weight 71.4kg (157.1lbs)
FRONT RUNNER Dodge Sprinter Van (2007-Current) Slimline Ii 1/4 Roof...
$2,241.00
$2,490.00
This 1560mm/61.4" long, Slimline II cargo carrying roof rack kit for the Dodge Sprinter (2007+) contains a Slimline II Tray, Wind Deflector, Track Set and 6 Mounting Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner1 x TRMS001 - Mercedes-Benz Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 35kg (77lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 455mm (18")Length 1800mm (71")Height 250mm (10")
Shipping Weight:
Weight 40.9kg (90.0lbs)
FRONT RUNNER Dodge Sprinter Van (2007-Current) Slimline Ii 1/2 Roof...
$3,339.90
$3,711.00
This 2312mm/91" long, 1/2 Slimline II cargo carrying roof rack kit for the Dodge Sprinter (2007+) contains 2 Slimline II Trays, Wind Deflector, Track Set and 12 Mounting Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
6 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner2 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner1 x TRMS001 - Mercedes-Benz Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 55kg (120lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 455mm (18")Length 1800mm (71")Height 380mm (15")
Shipping Weight:
Weight 63.4kg (139.5lbs)
FRONT RUNNER Dodge Ram W/ Rambox (2009-Current) Slimline Ii 6'4In...
$1,831.50
$2,035.00
This kit creates a full-size rack that sits above your Dodge Ram's (2009 + w/OEM bed rails and RamBox) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1762mm) and 6 Pick-Up Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner2 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 28kg (61lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 32.2kg (70.8lbs)
FRONT RUNNER Citroen Jumper (L4H2/159 Wb/High Roof) (2014-Current) Slimpro Van...
$2,837.70
$3,153.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Citroen Jumper vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with Citroen Jumper (L4H2/159” WB) (2014-Current) high roof vans with a vehicle length of 6363mm / 250.5".
Load-carrying area: 3928mm (154.6") x 1565mm (61.6").
Ten (10) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:5x FAVF002 - FPCR Foot Set - by Front Runner2x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm2x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:3928mm (154.6") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 42.17kg (92.97lbs)
Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")
Shipping Weight:Weight: 43.35kg (95lbs)
FRONT RUNNER Citroen Jumper (L3H2/159 Wb/High Roof) (2014-Current) Slimpro Van...
$2,692.80
$2,992.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Citroen Jumper vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with Citroen Jumper (L3H2/159” WB) (2014-Current) high roof vans with a vehicle length of 5998mm / 236.1".
Load-carrying area: 3580mm (141") x 1565mm (61.6").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)2x SPVT004 - Van Rack Side Profile / 1762mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:3580mm (141") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 40.94kg (90.26lbs)
Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 44.35kg (98lbs)
FRONT RUNNER Citroen Jumper (L2H2/136 Wb/High Roof) (2014-Current) Slimpro Van...
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Citroen Jumper vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with Citroen Jumper (L2H2/136” WB) (2014-Current) high roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mmH (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.35kg (80lbs)
FRONT RUNNER Citroen Jumper (L2H1/136 Wb/Low Roof) (2014-Current) Slimpro Van...
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Citroen Jumper vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with Citroen Jumper (L2H1/136” WB) (2014-Current) low Roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: This Slimpro Van Rack Kit is not compatible with Dometic PerfectWall Awnings.
* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") HApproximate Installed Weight: 31.49kg (69.42lbs)
Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.35kg (80lbs)
FRONT RUNNER Citroen Jumper (L1H1/118 Wb/Low Roof) (2014-Current) Slimpro Van...
$2,101.50
$2,335.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Citroen Jumper vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with Citroen Jumper (L1H1/118” WB) (2014-Current) low roof vans with a vehicle length of 4963mm / 195.4".
Load-carrying area: 2570mm (101.2") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm1x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2570mm (101.2") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 30.99kg (68.32lbs)
Citroen Jumper Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 35.35kg (78lbs)
FRONT RUNNER Chevrolet Colorado Roll Top 5.1' (2015-Current) Slimline Ii...
$1,800.00
$2,000.00
This kit creates a full-size rack that sits above your Chevrolet Colorado's (2015-current) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks and 4 Pickup Roll Top Leg Mounts that fit into the Tracks. Drilling is required for installation.
This kit creates a full-size rack that sits above your Chevrolet Colorado's (2015-current) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks and 4 Pickup Roll Top Leg Mounts that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.This Rack Kit creates a second level of storage for your load bed above the roll top of your Chevy Colorado.All Front Runner Racks are backed by a Limited Lifetime Warranty*A load bed top ledge with a minimum surface area of 55mm wide and length of 1000mm - 1600mm is required to mount Front Runner tracks.Dependent on the roll top used a minimum clearance of 20mm is required from the inner face of the leg base, to the roll top outer edge. This applies when the leg is fitted to a Front Runner Track or other Roll Top channel.For further information on installation, please see the fitment instructions in the INSTALL tab.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.41kg (69.25lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 34.63kg (76lbs)
FRONT RUNNER Chevrolet Trailblazer (2012-Current) Slimline Ii Roof Rack Kit...
$1,435.50
$1,595.00
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Trailblazer (2012-Current).
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Trailblazer (2012-Current).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner camp tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This Rack Kit is not applicable to Chevrolet Trailblazers in North America.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FACT001 - Chevrolet Trailblazer Foot Rails - by Front Runner1 x RRSTA08 - Slimline II Tray - 1165mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 28.2kg (62.0lbs)
FRONT RUNNER Chevrolet Silverado/Gmc Sierra 2500/3500 Retrax Xr 6'10In (2020-Current)...
$2,453.40
$2,726.00
Double up the loading space on your Chevrolet Silverado/GMC Sierra with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Chevrolet Silverado/GMC Sierra.
This kit creates a full-size rack that sits above your Chevrolet Silverado/GMC Sierra 2500/3500’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1964mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 39.57kg (87.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 41kg (90lbs)
FRONT RUNNER Chevrolet Silverado/Gmc Sierra 2500/3500 (2007-Current) Retrax Xr 8...
$2,763.00
$3,070.00
Double up the loading space on your Chevrolet Silverado/GMC Sierra with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Chevrolet Silverado/GMC Sierra.
This kit creates a full-size rack that sits above your Chevrolet Silverado/GMC Sierra 2500/3500’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 2368mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP12 - SLII Tray - 1575mm(W)X2368mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 44.17kg (97.38lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 46kg (101lbs)
FRONT RUNNER Chevrolet Silverado/Gmc Sierra 1500/2500/3500 Retrax Xr 6'6In (1988-Current)...
$2,453.40
$2,726.00
Double up the loading space on your Chevrolet Silverado/GMC Sierra with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Chevrolet Silverado/GMC Sierra.
This kit creates a full-size rack that sits above your Chevrolet Silverado/GMC Sierra 1500/2500/3500’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1964mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 39.57kg (87.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 41kg (90lbs)
FRONT RUNNER Chevrolet Silverado/Gmc Sierra 1500/2500/3500 Retrax Xr 5'9In (2007-Current)...
$2,157.30
$2,397.00
Double up the loading space on your Chevrolet Silverado/GMC Sierra with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Chevrolet Silverado/GMC Sierra.
This kit creates a full-size rack that sits above your Chevrolet Silverado/GMC Sierra (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 35.43kg (78.11lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 37kg (81lbs)
FRONT RUNNER Chevrolet Silverado/Gmc Sierra 1500/2500/3500 Crew Cab (2014-2018) Slimline...
$1,646.10
$1,829.00
Double up the loading space on your Chevrolet Silverado/GMC Sierra 1500 Crew Cab with this Slimline II Roof Rack Kit. This versatile, off-road tough roof rack is compatible with a wide range of accessories which allows you to customize it to suit your lifestyle, adventure sport, and travels.
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Silverado/GMC Sierra 1500 Crew Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner camp tables.
These Foot Rails contain 1 opening to access a under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FACS002 - ChevSilverado/GMCSierra1500CCab(14-18)FootRails1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 26.42kg (58.25lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Chevrolet Silverado/Gmc Sierra 1500 Crew Cab (2019-Current) Slimline...
$1,775.70
$1,973.00
Gear up your Chevrolet Silverado/GMC Sierra 1500 Crew Cab for any adventure with the Slimline II Roof Rack. The Slimline II’s lightweight, modular construction allows you to customize your setup with over 55 accessories to suit your lifestyle and travel needs. This particular roof rack kit features Low Profile Foot Rails to help minimize drag when carrying loads, which could make it more fuel-efficient.
This 1560mm/61.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Silverado/GMC Sierra 1500 Crew Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FACS003 - Chev Silverado/GMC Sierra 1500(19-Curr)Foot Rails1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 32.4kg (71.43lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 275mm (11")Shipping Weight:Weight: 35kg (77lbs)
FRONT RUNNER Chevrolet Silverado/Gmc Sierra 1500 Crew Cab (2014-2018) Slimline...
$1,655.10
$1,839.00
This 1358mm/53.5'' long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Chevrolet Silverado/GMC Sierra 1500 Crew Cab.
Drilling is required for installation. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: Some side mount accessories are not suited for low profile foot rails such as JADA010 and RRAC103.
FRONT RUNNER Chevrolet Silverado Crew Cab / Short Load Bed...
$2,028.60
$2,254.00
This kit creates a full-size rack that sits above your Chevrolet Silverado Crew Cab / Short Load Bed, truck bed and contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
This kit creates a full-size rack that sits above your Chevrolet Silverado Crew Cab / Short Load Bed, truck bed and contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 35.3kg (77.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18.0")Length: 1730mm (68.0")Height: 290mm (11.0")
Shipping Weight:35.8kg (79.0lbs)
FRONT RUNNER Chevrolet Silverado Crew Cab / Short Load Bed...
$935.10
$1,039.00
Transport all your adventure gear safely over the bed of your Chevy Silverado with these three strong, sleek Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab / Short Load Bed. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 15.9kg (35.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 1685mm (66.0")Length: 125mm (5.0")Height: 385mm (15.0")
Shipping Weight:14.4kg (32.0lbs)
FRONT RUNNER Chevrolet Silverado Crew Cab (2007-Current) Triple Load Bar...
$1,016.10
$1,129.00
Transport all your adventure gear safely over the bed of your Chevy Silverado with these three strong, sleek Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 16.6kg (36.7lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 130mm (5.0")Length: 1605mm (63.0")Height: 390mm (15.0")
Shipping Weight:16.6kg (37.0lbs)
FRONT RUNNER Chevrolet Silverado Crew Cab (2007-Current) Slimline Ii Load...
$2,307.60
$2,564.00
Make your Chevrolet Silverado Crew Cab load bed more versatile and free up precious load bed space with this full size rack that easily installs into the supplied Tracks.
This kit creates a full-size rack that sits above your Chevrolet Silverado Crew Cab truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner
Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 39.4kg (87.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 1730mm (68.0")Length: 445mm (18.0")Height: 290mm (11.0")
Shipping Weight:35.8kg (79.0lbs)
FRONT RUNNER Chevrolet Silverado 3Rd/4Th Gen (2013-Current) Cab Over Camper...
$1,052.10
$1,169.00
Ensure your Chevrolet Silverado can comfortably carry extra gear on top of the cab by fitting this Front Runner Rack Kit that includes a Slimline II Rack Tray, wind deflector and 2 Cab Over Camper Rails. Your Silverado is now rack-ready for any adventure.
This 752mm/29.6” long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Cab Over Camper Rails to mount the Slimline II Tray to your Chevrolet Silverado 3rd/4th Gen. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FACS004 - Chev Silverado 3rd & 4th gen Shorty foot rails1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 17.04kg (37.57lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")Shipping Weight:Weight: 24kg (53lbs)
FRONT RUNNER Chevrolet Colorado/Gmc Canyon Retrax Xr 6In (2015-Current) Slimline...
$1,977.30
$2,197.00
Double up the loading space on your Chevrolet Colorado/GMC Canyon with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Chevrolet Colorado/GMC Canyon.
This kit creates a full-size rack that sits above your Chevrolet Colorado/GMC Canyon’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 34.42kg (75.88lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 240mm (9")
Shipping Weight:Weight: 34kg (75lbs)
FRONT RUNNER Chevrolet Colorado/Gmc Canyon Retrax Xr 5In (2015-Current) Slimline...
$1,680.30
$1,867.00
Double up the loading space on your Chevrolet Colorado/GMC Canyon with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Chevrolet Colorado/GMC Canyon.
This kit creates a full-size rack that sits above your Chevrolet Colorado/GMC Canyon’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 29.53kg (65.1lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 240mm (9")
Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Chevrolet Colorado/Gmc Canyon At4 Crew Cab (2023-Current) Slimline...
$1,516.50
$1,685.00
Unlock your Chevrolet Colorado/GMC Canyon AT4 Crew Cab external storage potential with the highly versatile yet rugged Slimline II Roof Rack kit. Gearing up for your next off-road trip, camping weekend, or overland journey of a lifetime is easy when you have an expansive and totally customizable load-carrying area.
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado/GMS Canyon AT4 Crew Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FACC004 - Chev Colorado/GMC canyon AT4 (2023 - current) Footrails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 24.76kg (54.59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")
Shipping Weight:Weight: 32kg (70lbs)
FRONT RUNNER Chevrolet Colorado /Gmc Canyon Zr2 2Nd Gen (2015-2022)...
$984.60
$1,094.00
Need external cargo carrying capacity for your Chevrolet Colorado /GMC Canyon ZR2 with the Cab Over Camper? Then look no further than the Slimline II Roof Rack Kit, which includes a tray, wind deflector and foot rails.
This 752mm/29.6” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado/GMC Canyon ZR2 2nd Gen. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCC012T - Chevrolet Colorado /GMC Canyon ZR2 2nd Gen (2015-2022) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:1x FACC005 - Chev Colorado/GMC Canyon (15-22)ZR2 Shorty Foot1x RRSTD04 - SLII Tray - 1255mm(W)X752mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 14.75kg (32.52lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 280mm (11")
Shipping Weight:Weight: 20kg (44lbs)
FRONT RUNNER Chevrolet Colorado (2015-2022) Slimline Ii Roof Rack Kit...
$1,493.10
$1,659.00
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado. Drilling is required for installation.
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FACC001 - Chev Colorado/GMC Canyon (2015-2022) Foot Rails - by Front Runner1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 25kg (56lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 29.4kg (64.8lbs)
FRONT RUNNER 6 Wolf Pack Pro Drawer / Wide Incl....
$2,897.10
$3,219.00
Neatly organize and easily access all your gear with this innovative drawer-slide system. This kit was specifically designed for the Wolf Pack Pro (the ultimate plastic storage box) and includes six Wolf Pack Pro load bins so you can store and transport all your gear.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Pack ProsInstallation HardwareFitting Instruction
Materials used:Aluminum - Accessory Channels & Sub FrameBlack powder coated steel - FrameCarpet & Laminated plywood - Top Deck
Product Dimensions:Overall Dimensions:1252mm (49.3") L x 1083mm (42.6") W x 310mm (12.2") H
Drawer Inner Dimensions:1197mm (47.1") L x 1031mm (40.6") W x 230mm (9.1") H
Drawer Unit Open Dimensions:2163mm (85.2") L x 1083mm (42.6") W x 310mm (12.2") H
Weight:67Kg (147.7lbs)
Load Rating:113Kg (250lbs)
Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
FRONT RUNNER 6 Cub Pack Drawer / Wide Incl. Boxes...
$2,450.70
$2,723.00
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.This removable box drawer includes 1 drawer slide, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes. These stackable and durable SBOX001 storage containers are made from black, high strength plastic and have integrated grips for easy carrying. 113kg / 250 lb per drawer load carrying capacity.
Hold open feature: drawer “locks” open while parked on uneven surfaces. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear. The flat deck incorporates three cargo attachment channels and 6 RRAC012.
Customize your own storage configurations. Stack and secure luggage, SBOX031s, SBOX001s, aluminum boxes and other storage containers to the top deck using STRA034 or other straps. The deck above the drawer can also be used to mount Front Runner Cargo / Fridge Slides. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Removable Box Drawer can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy. This storage system is designed for interior use. All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: These ''universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top DeckProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 950mm (37.4") W x 285mm (11.2") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:64.3kg (141.8lbs)Load Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
FRONT RUNNER 6 Cub Box Drawer W/ Cargo Sliding Top...
$1,691.10
$1,879.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This 6 Cub Box Drawer with Cargo Sliding Top kit includes both a sliding drawer, sliding deck, 2 rotating latch mechanisms and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths.
These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear spread across the surface. Fitted with a latching mechanism, both drawer and slide are kept in place when in the closed position.
Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck slide using STRA034 or other straps as well as RAIL007 and RRAC012. The deck is finished with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo, while insulating against noise and vibration.
Finished with the same durable black powder coating as the Front Runner Slimline II Roof Rack The Front Runner 6 Cub Box Drawer with Cargo Sliding Top can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty.
Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - FrameNylon Carpet & Laminated Plywood - Top Drawer BaseProduct Dimensions:969mm (38.1") L x 940mm (37") W x 350mm (13.8") HInterior Drawer Dimensions:Full Size:944mm (37.2") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Bottom Drawer Sections:944mm (37.2") L x 440mm (17.3") W x 45mm (1.8") HTop Drawer:948mm (37.3") L x 893mm (35.2") W x 71mm (2.8") HWeight:68.04kg (150lbs)Load Rating:113kg (250lbs) Interior Drawers113kg (250lbs) Top DrawerSpecial Notes:The drawer unit has rotating latches to secure both the top and bottom drawers in place.
FRONT RUNNER 4 Wolf Pack Pro Storage System Kit/ Asymmetric...
$1,102.50
$1,225.00
This smart, asymmetrical storage solution enables your vehicle to house the four included Wolf Pack Pro boxes. It takes only minutes to install, and then you can slide the Wolf Pack Pro boxes into place. This is a spring-loaded system so the boxes won’t vibrate or move excessively. The clean Bamboo deck can hold a max weight of 80 kg and is the perfect place for your fridge and slide.
This storage system includes 1 storage unit, top deck, 4 Wolf Pack Pros, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The top deck is finished with a clean Bamboo wood finish.Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Note: Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.
Consists of:1 x Storage Unit2 x Top Decks4 x Wolf Pack ProInstallation HardwareFitting Instructions
Materials used:Black powder coated mild steel - FrameBamboo - Top Drawer Base
Product Dimensions:975mm (38.4") L x 975mm (38.4") W x 315mm (12.4") H
Wolf Pack Pro Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H
Weight:50.6kg (111.6lbs)
Special Note:80kg (176.4lbs) top deck load capacity
FRONT RUNNER 4 Wolf Pack Pro Storage System Kit /...
$1,125.00
$1,250.00
This convenient narrow storage solution means your vehicle can cleverly store 4 Wolf Pack Pro boxes in style. It’s been designed for interior vehicle use or in the covered load bed of a pick-up and takes only minutes to install, and then you can easily slide your storage boxes in and out. The carpeted deck holds up to 80kg / 176.4 lbs and is perfect for fridge/cargo slides. Includes four clip-to-close, stackable, and durable Wolf Pack Pro storage boxes.
This storage system includes 1 storage unit, top deck, 4 Wolf Pack Pros, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The deck is covered with a durable, UV resistant nylon pile carpet.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.Note: Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.
FRONT RUNNER 4 Cub Box Drawer / Wide - SSAM009
$1,011.60
$1,124.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into vehicles with a smaller than usual cargo area.
This 4 Cub Box Drawer / Wide kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base.
Fitted with a latching mechanism, the drawer is kept in place when in the closed position. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear across the surface. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack. The 4 Cub Box Drawer / Wide can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty.
Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer FrameNylon Carpet & Laminated Plywood - Top DeckProduct Dimensions:653mm (25.7") L x 940mm (37") W x 261mm (10.3") HInterior Drawer Dimensions:Full Size:629mm (24.8") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Sections (Left & Right Hand Side):629mm (24.8") L x 440mm (17.3") W x 45mm (1.8") HWeight:36.8kg (81.1lbs)Load Rating:113kg (250lbs)Special Notes:The drawer has a rotating latch to secure drawer in place.
FRONT RUNNER 4 Cub Box Drawer / Narrow - SSAM008
$1,069.20
$1,188.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into narrow vehicles such as the Land Rover Defender 90/110 (1983-2016), or vehicles where the wheel arches protrude further than usual.
This 4 Cub Box Drawer / Narrow kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. Fitted with a latching mechanism, the drawer is kept in place when in the closed position. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack The 4 Cub Box Drawer / Narrow can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty. Installation of this product requires a Rivnut tool.
*Please Note: The 4 Cub Box Drawer / Narrow does not come with an upper flat deck, deck completion set or face plates as standard fitment. The wood included in the drawer is for transportation/shipping purposes only. This “universal” drawer is designed to be a fully customized fitment.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer unitProduct Dimensions:906mm (35.7") L x 696mm (27.4") W x 262mm (10.3") HInterior Drawer Dimensions:882mm (34.7") L x 646mm (25.4") W x 45mm (1.8") HWeight:38.44kg (84.7lbs)Special Notes:The drawer has a rotating latch to secure the drawer in place.
FRONT RUNNER Rsi Smart Canopy Slimline Ii Rack Kit /...
$1,399.50
$1,555.00
This kit creates a full size rack on a RSI Canopy with a roof top size of approximately 1165mm/45.9" (W) x 1358mm/53.5" (L). The Slimline II Tray mounts to supplied Feet that slide in to the canopy track.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This Kit does not fit Volkswagen Amarok Double Cab Canopies. Please use .
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner3 x RRAC921 - Canopy Rack Kit Installation Set1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 23.3kg (51.4lbs
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0")
Shipping Weight:23.1kg (51.0lbs)
FRONT RUNNER Rsi Extra Cab Smart Canopy Slimline Ii Rack...
$1,543.50
$1,715.00
This 1762mm/69.4'' long, full-size, Slimline II cargo carrying roof rack kit for the RSI Extra Cab Smart Canopy contains:
Slimline II Tray
Wind Deflector
6 Feet
Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Volkswagen Amarok Single Cab Slimline Ii Rsi Canopy...
$1,615.50
$1,795.00
The rack size is approximately 1255mm/49.4'' (W) x 1762mm/69.4'' (L). The Slimline II Tray mounts to supplied feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: RSI Canopies are color-coded to your vehicle and have a lead time of 10 working days to manufacture.
FRONT RUNNER Volkswagen Amarok Double Cab Rsi Canopy Slimline Ii...
$1,345.50
$1,495.00
The rack size is approximately 1255mm/49.4'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Rhinoman Canopy Slimline Ii Rack Kit / 1165Mm(W)...
$1,286.10
$1,429.00
All Front Runner Rack Kits contain installation instructions as well as all components needed to mount the Slimline II Tray to the canopy. All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCA076T - Rhinoman Canopy Slimline II Rack Kit / 1165mm(W) x 1358mm(L) - by Front Runner
Consisting of:
3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 23.1kg (50.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0")
Shipping Weight:23.0kg (51.0lbs)
FRONT RUNNER Rsi Single Cab Smart Canopy Slimline Ii Rack...
$1,543.50
$1,715.00
The Front Runner Rack Kit mentioned is designed to create a full-size rack on a RSI Canopy with specific roof top dimensions of approximately 1165mm/45.9'' (W) x 1762mm/69.4'' (L). The kit includes a Slimline II Tray that mounts to the supplied Feet, which easily slide into the existing RSI canopy track. This setup ensures a secure and straightforward installation process without the need for any modifications.
As with all Front Runner Rack Kits, this one also includes comprehensive installation instructions to guide you through the setup. Additionally, all the necessary components required to mount the Slimline II Tray to the canopy are included in the kit, ensuring a hassle-free assembly.
Front Runner is known for producing durable and reliable racks, and to provide added peace of mind, all Front Runner Racks are backed by a Limited Lifetime Warranty. This warranty ensures that the rack is covered for any manufacturing defects or issues that may arise during its lifetime of use.
With this Front Runner Rack Kit, you can conveniently transform your RSI Canopy into a full-size rack, expanding its carrying capacity and versatility. The easy installation process and warranty coverage make it a valuable upgrade for your vehicle.
FRONT RUNNER Nissan Navara D23 Double Cab (2014-Current) Rsi Canopy...
$1,286.10
$1,429.00
The Front Runner Rack Kit provided is specifically designed for the Nissan Navara RSI Canopy. The kit includes a full-size rack with dimensions approximately 1165mm/45.9'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track, ensuring a secure and easy installation process.
As with other Front Runner Rack Kits, this one also contains comprehensive installation instructions, making it easier for you to mount the Slimline II Tray to your vehicle. Additionally, all the necessary components required for the installation are included in the kit, so you won't have to purchase anything separately.
The Front Runner Racks are known for their quality and durability, and to provide peace of mind, they are backed by a Limited Lifetime Warranty. This warranty ensures that you have support in case of any manufacturing defects or issues with the rack.
Please note that RSI Canopies are color-coded to match your vehicle and have a lead time of 10 working days for manufacturing. Make sure to consider this additional time when planning your installation.
Overall, this Front Runner Rack Kit offers a great solution for adding extra storage capacity to your Nissan Navara RSI Canopy, and with its easy installation and warranty coverage, it provides a reliable and long-lasting upgrade for your vehicle.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,514.60
$2,794.00
The Rack Kit provided is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2772mm/109.1'' (L). It includes a Slimline II Tray and eight (8) supplied Feet that mount onto the OEM/Factory installed track of your canopy/shell or trailer.
Please be aware that depending on the specific make and model of your canopy or trailer, additional fasteners may be required to properly fit the OEM/Factory supplied tracks. It is essential to check the compatibility of the supplied hardware with your existing canopy track before installation.
All Front Runner Rack Kits come with comprehensive installation instructions to guide you through the mounting process. The kit includes all the necessary components needed to securely attach the Slimline II Tray to your vehicle.
To ensure that the Front Runner Feet and supplied hardware work seamlessly with your OEM/Factory supplied canopy track, the track must meet the following specifications:
Slot base width: minimum 20mm, maximum 25mm
Slot base height: minimum 6.5mm, maximum 10mm
Slot opening width: minimum 8.5mm, maximum 10.5mm
Slot opening height: minimum 2mm, maximum 5mm
Before proceeding with the installation, it is highly recommended to check with the canopy manufacturer to determine the load ratings and capacity limits for your specific canopy and track. Adhering to the load ratings is crucial for safe and reliable use of the rack.
Lastly, all Front Runner Racks are covered by a Limited Lifetime Warranty, providing assurance of the product's quality and durability over the long term.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
