Fatz Fabrication
FATZ FABRICATION Vdj70 Rh Snorkel. Powder Coated Satin Black. Suit 4" Airbox Inlet - FFVDJ-SNRH-SPC-4
$1,460.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Ram Head, Texture Coated Satin Black. Suit 3.25" Airbox Inlet - FFVDJ24-SNRH-RM-TPC-325
$1,460.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Ram Head, Texture Coated Satin Black. Suit 4" Airbox Inlet - FFVDJ24-SNRH-RM-TPC-4
$1,460.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Dobinson 3.5"I.D Ram Head (Secures To Tube With S/S Screws. Slides Into Snorkel Inlet) - 000-135-910
$155.00
Safari 3.5″ Ram head.
3.5″″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
Fatz Fabrication
FATZ FABRICATION Ra Raptor 5″ P/C Snorkel. Includes Airbox Adation, And Washer Bottle. - FFRAR-SN5RH-SPC-FAB
$2,090.00
RA RAPTOR 5″ Snorkel inc Washer bottle
The Ranger Raptor is a substantial step up in the current generation with power to support the exceptional chassis configuration. The Fatz Built RA RAPTOR 5" snorkel incorporates the true RAPTOR ethos with it's oversized yet refined styling. Our Snorkel is built in 304 Grade Stainless steel tube and finished to a true seamless form through a process developed over the 14 years we have been building snorkels. Then powder coated Satin Black to match common accessories on the market. Fitment is key with the need to align with body panels from any angle. Mounting to the A pillar is secure and robust with 3 M6 Nutcerts mounting the folded bracket.
The RA comes from the factory with the washer bottle for the windscreen in the guard cavity making plumbing to the Airbox inlet difficult. Fatz has overcome this with our specifically designed Aluminium replacement unit which fits in the factory location. Resulting in the ability to plumb to the airbox inlet with 4" tubing for maximum airflow as required.
Our snorkels are provided with all components required for installation including all plumbing items needed, cad drawn and scale printed templates, colour photo instruction manual, Fabricated washer bottle, plumbing to airbox and the confidence only purchasing with Fatz can bring.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. Additional Silicone And Clamps For Safari Snorkel Adaption. - FFNP-AB-DF-SAF
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Airbox. Oiled Element Air Filter. Additional Silicone And Clamps For Safari Snorkel Adaption. - FFNP-AB-OF-SAF
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. Additional Silicone And Clamps For Tjm Snorkel Adaption. - FFNP-AB-DF-TJM
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Airbox. Oiled Element Air Filter. Additional Silicone And Clamps For Tjm Snorkel Adaption. - FFNP-AB-OF-TJM
$1,440.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Rh Snorkel. Polished. Suit 3" Airbox Inlet Inc Factory Adaption Kit - FFNP-SNRH-POL-FAB
$2,120.00
Np300/ D23 Navara 3″ Snorkel
The NP300/D23 Navara is a commonly customised vehicle, with great aftermarket accessory options on the market. In line with this, our Fatz Built NP300/D23 Navara snorkel is designed with aesthetics and fitment in mind. The guard cavity provides a couple of challenges with minimal room, and the factory washer bottle to contend with. We have this sorted with the design of our snorkel, allowing for ample clearance, to fit plumbing through the guard without hard contact with body panels, or manipulating silicone bends to make them fit. Our snorkels are built in 316 Grade, 3″ stainless steel, and finished to a seamless form for polishing or powder coating, depending on your preference. Plumbing to the Airbox in 3″ ducting, supplying ample air for the 2.3L engines. *Adaption kit, and Fatz Built washer bottle are required to plumb to the factory airbox, due to the entry location on the airbox, and ECU mounting location. Option these at checkout for a complete installation kit.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ slightly from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Rh Snorkel. Powder Coated Satin Black. Suit 3" Airbox Inlet Inc Factory Adaption Kit - FFNP-SNRH-SPC-FAB
$2,120.00
Np300/ D23 Navara 3″ Snorkel
The NP300/D23 Navara is a commonly customised vehicle, with great aftermarket accessory options on the market. In line with this, our Fatz Built NP300/D23 Navara snorkel is designed with aesthetics and fitment in mind. The guard cavity provides a couple of challenges with minimal room, and the factory washer bottle to contend with. We have this sorted with the design of our snorkel, allowing for ample clearance, to fit plumbing through the guard without hard contact with body panels, or manipulating silicone bends to make them fit. Our snorkels are built in 316 Grade, 3″ stainless steel, and finished to a seamless form for polishing or powder coating, depending on your preference. Plumbing to the Airbox in 3″ ducting, supplying ample air for the 2.3L engines. *Adaption kit, and Fatz Built washer bottle are required to plumb to the factory airbox, due to the entry location on the airbox, and ECU mounting location. Option these at checkout for a complete installation kit.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ slightly from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Rh Snorkel. Polished. Suit 3" Airbox Inlet (Fatz & Factory) - FFNP-SNRH-POL-3
$1,920.00
Np300/ D23 Navara 4″ Snorkel
The NP300/D23 Navara is a commonly customised vehicle, with great aftermarket accessory options on the market. In line with this, our Fatz Built NP300/D23 Navara snorkel is designed with aesthetics and fitment in mind. The guard cavity provides a couple of challenges with minimal room, and the factory washer bottle to contend with. We have this sorted with the design of our snorkel, allowing for ample clearance, to fit plumbing through the guard without hard contact with body panels, or manipulating silicone bends to make them fit. Our snorkels are built in 316 Grade, 4″ stainless steel, and finished to a seamless form for polishing or powder coating, depending on your preference. Plumbing to the Airbox in 3″ ducting, supplying ample air for the 2.3L engines. *Adaption kit, and Fatz Built washer bottle are required to plumb to the factory airbox, due to the entry location on the airbox, and ECU mounting location. Option these at checkout for a complete installation kit.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ slightly from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Np300 Navara Rh Snorkel. Powder Coated Satin Black. Suit 3" Airbox Inlet (Fatz & Factory) - FFNP-SNRH-SPC-3
$1,920.00
Np300/ D23 Navara 3″ Snorkel
The NP300/D23 Navara is a commonly customised vehicle, with great aftermarket accessory options on the market. In line with this, our Fatz Built NP300/D23 Navara snorkel is designed with aesthetics and fitment in mind. The guard cavity provides a couple of challenges with minimal room, and the factory washer bottle to contend with. We have this sorted with the design of our snorkel, allowing for ample clearance, to fit plumbing through the guard without hard contact with body panels, or manipulating silicone bends to make them fit. Our snorkels are built in 316 Grade, 3″ stainless steel, and finished to a seamless form for polishing or powder coating, depending on your preference. Plumbing to the Airbox in 3″ ducting, supplying ample air for the 2.3L engines. *Adaption kit, and Fatz Built washer bottle are required to plumb to the factory airbox, due to the entry location on the airbox, and ECU mounting location. Option these at checkout for a complete installation kit.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ slightly from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Y62 5" Rh Snorkel. Powder Coated Satin Black. Suit Factory Airbox Inlet. Includes Water Defelctor Plate For Airbox....
$2,090.00
Y62 Patrol 5″ Powder coated Snorkel .
The Y62 Patrol is gaining popularity for touring and modification, with more aftermarket accessories and options on the market in current times. Our 5″ snorkel complements the appearance of the vehicle and follows body lines in a close fitting manor. The snorkel is 5″ 304 grade stainless steel. Purge welded and sanded back to a seamless finish in all cases. Powder coated Satin black to complement the aesthetic you desire for your vehicle. Supplied in all cases with all needed to install, for a DIY or supplied through one of our retailers across the country. With Fitment of snorkels on Y62 patrols we also install a duck valve and water deflector plate into the factory airbox to help prevent any water entering the snorkel from contacting the air filter. Compatible with all series of Y62 Patrol series1 through 5.
(Not available in polished finish at this time)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Hdj70 Series Rh Snorkel. Polished Finish. Suit Factory Airbox. Additional Adaption Kit Included. - FFHDJ-SNRH-POL-FAB
$1,560.00
HDJ79 4″ Snorkel.
Compatible with HDJ79 series vehicles, our HDJ79 series 4″snorkel is designed to work in conjunction with our Airbox as well as factory to ensure adequate flow potential for your needs. Built in 316 grade stainless steel and finished to your preference of 320 grain polished finish or powder coated Satin black to match common bar work on the market. In all cases our snorkels are finished to a seamless form, with no evidence of welding visible. Mounting brackets in 3mm Stainless steel picking up on factory mounting locations. 2 remaining mounting locations capped with fasteners. Supplied with stainless steel button head bolts For a professional and clean mounting solution. This snorkel couples to our Fatz Airbox with a straight silicone coupling to ensure a full 4″ of airflow into the airbox. Supplied in all cases with template, edge protector, fasteners and instructions for installation.Snorkel can be coupled with factory airbox with additional adaption kit utilizing Safari Armax inlet duct. Not Compatible with HZJ79/78 Series vehicles.
(COMPATIBLE WITH FACTORY AIRBOX WITH ADDITIONAL PARTS KIT)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Hdj70 Series Rh Snorkel. Powder Coated Satin Black. Suit Factory Airbox. Additional Adaption Kit Included. - FFHDJ-SNRH-SPC-FAB
$1,560.00
Compatible with HDJ79 series vehicles, our HDJ79 series snorkel is designed to work in conjunction with our Airbox as well as factory to ensure adequate flow potential for your needs. Built in 316 grade stainless steel and finished to your preference of 320 grain polished finish or powder coated Satin black to match common bar work on the market. In all cases our snorkels are finished to a seamless form, with no evidence of welding visible. Mounting brackets in 3mm Stainless steel picking up on factory mounting locations. 2 remaining mounting locations capped with fasteners. Supplied with stainless steel button head bolts For a professional and clean mounting solution. This snorkel couples to our Fatz Airbox with a straight silicone coupling to ensure a full of airflow into the airbox. Supplied in all cases with template, edge protector, fasteners and instructions for installation.Snorkel can be coupled with factory airbox with additional adaption kit utilizing Safari Armax inlet duct. Not Compatible with HZJ79/78 Series vehicles.
(COMPATIBLE WITH FACTORY AIRBOX WITH ADDITIONAL PARTS KIT)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Hdj70 Series Rh Snorkel. Polished Finish. Suit Fatz 4" Airbox Inlet - FFHDJ-SNRH-POL-4
$1,460.00
HDJ79 4″ Snorkel.
Compatible with HDJ79 series vehicles, our HDJ79 series 4″snorkel is designed to work in conjunction with our Airbox as well as factory to ensure adequate flow potential for your needs. Built in 316 grade stainless steel and finished to your preference of 320 grain polished finish or powder coated Satin black to match common bar work on the market. In all cases our snorkels are finished to a seamless form, with no evidence of welding visible. Mounting brackets in 3mm Stainless steel picking up on factory mounting locations. 2 remaining mounting locations capped with fasteners. Supplied with stainless steel button head bolts For a professional and clean mounting solution. This snorkel couples to our Fatz Airbox with a straight silicone coupling to ensure a full 4″ of airflow into the airbox. Supplied in all cases with template, edge protector, fasteners and instructions for installation.Snorkel can be coupled with factory airbox with additional adaption kit utilizing Safari Armax inlet duct. Not Compatible with HZJ79/78 Series vehicles.
(COMPATIBLE WITH FACTORY AIRBOX WITH ADDITIONAL PARTS KIT)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Hdj70 Series Rh Snorkel. Powder Coated Satin Black. Suit Fatz 4" Airbox Inlet - FFHDJ-SNRH-SPC-4
$1,460.00
HDJ79 4″ Snorkel.
Compatible with HDJ79 series vehicles, our HDJ79 series 4″snorkel is designed to work in conjunction with our Airbox as well as factory to ensure adequate flow potential for your needs. Built in 316 grade stainless steel and finished to your preference of 320 grain polished finish or powder coated Satin black to match common bar work on the market. In all cases our snorkels are finished to a seamless form, with no evidence of welding visible. Mounting brackets in 3mm Stainless steel picking up on factory mounting locations. 2 remaining mounting locations capped with fasteners. Supplied with stainless steel button head bolts For a professional and clean mounting solution. This snorkel couples to our Fatz Airbox with a straight silicone coupling to ensure a full 4″ of airflow into the airbox. Supplied in all cases with template, edge protector, fasteners and instructions for installation.Snorkel can be coupled with factory airbox with additional adaption kit utilizing Safari Armax inlet duct. Not Compatible with HZJ79/78 Series vehicles.
(COMPATIBLE WITH FACTORY AIRBOX WITH ADDITIONAL PARTS KIT)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Airbox. Dry Element Air Filter. Includes Plumbing To Intake. Tjm Snorkel Specific Kit With Adaptor -...
$1,790.00
200 Series Airbox Package.
An Airbox upgrade is a must have on all 200 series vehicles, with dusting issues being common place across the range of 200 series models. An Airbox is cheap insurance to avoid costly damage. Also allowing a free-flowing intake system at the same time.The Standard Airbox does cause a flow restriction when tuning above the 30psi boost range. Fatz built Airboxes incorporate our machined MAF housing to retain factory air flow readings, a filter of your choice in either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration. Supplied with plumbing from the air box outlet to the factory inlet, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, fittings and hose clamps to install the air box.It is designed as a direct factory replacement utilizing the rubber mounts found on the factory air box. We provide detailed installation instruction and installation takes about 30 minutes. Compatible with most snorkel brands and can be supplied with Inlet adapters for some snorkel variants (Select options).
Please Note: Rendered images are for representation of the product only, some surface finishes and appearances may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Airbox. Oiled Air Filter. Includes Plumbing To Intake. Tjm Snorkel Specific Kit With Adaptor - FF200-AB-OF-TJM
$1,790.00
200 Series Airbox Package.
An Airbox upgrade is a must have on all 200 series vehicles, with dusting issues being common place across the range of 200 series models. An Airbox is cheap insurance to avoid costly damage. Also allowing a free-flowing intake system at the same time.The Standard Airbox does cause a flow restriction when tuning above the 30psi boost range. Fatz built Airboxes incorporate our machined MAF housing to retain factory air flow readings, a filter of your choice in either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration. Supplied with plumbing from the air box outlet to the factory inlet, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, fittings and hose clamps to install the air box.It is designed as a direct factory replacement utilizing the rubber mounts found on the factory air box. We provide detailed installation instruction and installation takes about 30 minutes. Compatible with most snorkel brands and can be supplied with Inlet adapters for some snorkel variants (Select options).
Please Note: Rendered images are for representation of the product only, some surface finishes and appearances may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Rh 5" Snorkel. Powder Coated Satin Black. Suit 4" Airbox Inlet (Fatz & Factory) - FF200-SN5-RH-SPC-4
$1,670.00
200 Series 5″ Stainless Snorkel
With the scaling of the body paneling and overall size of the Toyota 200 series Land cruiser, the aesthetic of a 5″ snorkel makes perfect sense. Built in 304 Grade Stainless steel tube and bends, finished to a seamless form, then powder coated Satin black. Our snorkels are supplied in all cases with all needed to install at home or with your preferred accessory installer. At Fatz, we pride ourselves on great instructions with colour photos to aid you in the installation process and supply all items needed for the installation. Mounting to the A Pillar with a laser cut, CNC folded bracket for a clean and secure mounting solution. Our Snorkel is compatible with all Airboxes which retain the factory entry location and sizing. Improve the water protection for your intake system while increasing the visual appeal of you vehicle at the same time. Fatz Built Snorkels will not be beaten in manufacturing quality and fitment.
(Not available in polished finish at this time)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Dobinson 3.5"I.D Ram Head (Secures To Tube With S/S Screws. Slides Into Snorkel Inlet) - SN80-090
$95.00
3.5″ Dobinson Ram Head. Compatible with all Fatz Built, Ram head snorkels.
3.5″ Dobinson Ram Head, suitable for use with all Fatz Built 4″ Ram head Snorkels. Slides into the top of the snorkel opening and secures with four stainless steel screws around the perimeter.
Fatz Fabrication
FATZ FABRICATION 200 Series Rh Snorkel. Ram Head. Powder Coated Texture Black. Suit Factory Airbox - FF200-SNRH-RM-TPC-FAB
$1,460.00
200 Series Ram Head Snorkel
Our Fatz Built, 200 series Ram Head snorkel is a good option if you want a ram head snorkel, though don’t want a plastic moulded snorkel. Available with a powder coated or polished finish. Built in 316 or 304 Grade Stainless steel tube depending on finish optioned, this snorkel will supply the airflow needs of any standard or modified engine adequately. Professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin or Texture Black to match common bar work accessories and factory elements on your vehicle. Texture satin Black powder coat is a good option to better match the texture on the ram head. Designed for compatibility with either Fatz Built, or factory Airboxes. Supplied with all items needed to fit out and plumb to the Airbox, our 200 series snorkel will compliment any 200 series vehicle and allow your engine to breathe easier and cleaner. Add our 200 series Airbox package to your cart for a complete solution for flow and filtration. Compatible with all 200 series models including pre and post facelift. Supplied with template, fasteners, u-Channel edge protector, plumbing to Airbox and instructions.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Rh Snorkel. Ram Head. Powder Coated Texture Black. Suit Fatz 4" Airbox Inlet - FF200-SNRH-RM-TPC-4
$1,460.00
200 Series 4″ Ram Head Snorkel
Our Fatz Built, 200 series Ram Head snorkel is a good option if you want a ram head snorkel, though don’t want a plastic moulded snorkel. Available with a powder coated or polished finish. Built in 4” 316 or 304 Grade Stainless steel tube depending on finish optioned, this snorkel will supply the airflow needs of any standard or modified engine adequately. Professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin or Texture Black to match common bar work accessories and factory elements on your vehicle. Texture satin Black powder coat is a good option to better match the texture on the ram head. Designed for compatibility with either Fatz Built, or factory Airboxes. Supplied with all items needed to fit out and plumb to the Airbox, our 200 series snorkel will compliment any 200 series vehicle and allow your engine to breathe easier and cleaner. Add our 200 series Airbox package to your cart for a complete solution for flow and filtration. Compatible with all 200 series models including pre and post facelift. Supplied with template, fasteners, u-Channel edge protector, plumbing to Airbox and instructions.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Rh Snorkel. Polished Finish. Suit Factory Airbox - FF200-SNRH-POL-FAB
$1,460.00
200 Series Land Cruiser 4″ Snorkel. Post and pre-Face lift.
Our Fatz Built 200 series Landcruiser snorkel is available in rear Facing and Ram head configuration, with a powder coated or polished finish. Built in 4” 316 Grade Stainless steel tube, this snorkel will supply the airflow needs of any standard or modified engine adequately. Professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed for compatibility with either Fatz Built or factory Airboxes. Supplied with all items needed to fit out and plumb to the Airbox, our 200 series snorkel will compliment any 200 series vehicle and allow your engine to breathe easier and cleaner. Add our 200 series Landcruiser Airbox package to your cart for a complete solution for flow and filtration. Compatible with all 200 series models including pre and post facelift. Supplied with template, fasteners, u-Channel edge protector, plumbing to Airbox and instructions.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Rh Snorkel. Powder Coated Satin Black. Suit Factory Airbox - FF200-SNRH-SPC-FAB
$1,460.00
200 Series 4″ Snorkel. Post and pre-Face lift.
Our Fatz Built 200 series snorkel is available in rear Facing and Ram head configuration, with a powder coated or polished finish. Built in 4” 316 Grade Stainless steel tube, this snorkel will supply the airflow needs of any standard or modified engine adequately. Professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed for compatibility with either Fatz Built or factory Airboxes. Supplied with all items needed to fit out and plumb to the Airbox, our 200 series snorkel will compliment any 200 series vehicle and allow your engine to breathe easier and cleaner. Add our 200 series Airbox package to your cart for a complete solution for flow and filtration. Compatible with all 200 series models including pre and post facelift. Supplied with template, fasteners, u-Channel edge protector, plumbing to Airbox and instructions.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Rh Snorkel. Polished Finish. Suit 4" Fatz Airbox - FF200-SNRH-POL-4
$1,460.00
200 Series Land Cruiser 4″ Snorkel. Post and pre-Face lift.
Our Fatz Built 200 series Landcruiser snorkel is available in rear Facing and Ram head configuration, with a powder coated or polished finish. Built in 4” 316 Grade Stainless steel tube, this snorkel will supply the airflow needs of any standard or modified engine adequately. Professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed for compatibility with either Fatz Built or factory Airboxes. Supplied with all items needed to fit out and plumb to the Airbox, our 200 series snorkel will compliment any 200 series vehicle and allow your engine to breathe easier and cleaner. Add our 200 series Landcruiser Airbox package to your cart for a complete solution for flow and filtration. Compatible with all 200 series models including pre and post facelift. Supplied with template, fasteners, u-Channel edge protector, plumbing to Airbox and instructions.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION 200 Series Rh Snorkel. Powder Coated Satin Black. Suit 4" Fatz Airbox - FF200-SNRH-SPC-4
$1,460.00
200 Series Land Cruiser 4″ Snorkel. Post and pre-Face lift.
Our Fatz Built 200 series Landcruiser snorkel is available in rear Facing and Ram head configuration, with a powder coated or polished finish. Built in 4” 316 Grade Stainless steel tube, this snorkel will supply the airflow needs of any standard or modified engine adequately. Professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed for compatibility with either Fatz Built or factory Airboxes. Supplied with all items needed to fit out and plumb to the Airbox, our 200 series snorkel will compliment any 200 series vehicle and allow your engine to breathe easier and cleaner. Add our 200 series Landcruiser Airbox package to your cart for a complete solution for flow and filtration. Compatible with all 200 series models including pre and post facelift. Supplied with template, fasteners, u-Channel edge protector, plumbing to Airbox and instructions.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Vdj70 Rh Airbox. 3.25" Inlet For Factory, V-Spec Safari Or Tjm Snorkel, Dry Air Filter. No Plumbing Kit...
$1,070.00
3.25″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 3.25″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Vdj70 Rh Airbox. 3.25" Inlet For Factory, V-Spec Safari Or Tjm Snorkel, Oiled Air Filter. No Plumbing Kit...
$1,070.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Vdj70 Rh Airbox. 4" Inlet For Fatz Or Safari Snorkel, Dry Air Filter. No Plumbing Kit - FFVDJ-ABRH4-DF
$1,070.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Vdj70 Rh Airbox. 4" Inlet For Fatz Or Safari Snorkel, Oiled Air Filter. No Plumbing Kit - FFVDJ-ABRH4-OF
$1,070.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Vdj70 Lh Snorkel. Polished Finish. (No Airbox Fitted) - FFVDJ-SNLH-POL
$1,460.00
VDJ70 LH″ Snorkel.
To add symmetry back to your vehicle after fitting a Fatz Built snorkel to the RH side of your Cruiser, just add a LH snorkel. This snorkel is designed to mirror our RH snorkel and uses the same mounting style and locations. Threaded inserts do need to be fitted to secure the snorkel, with no factory locations on the LH side. Built in 316 grade stainless steel, finished to a seamless form and either powder coated satin black or polished to a 320 grain finish. Specifically designed to terminate in the guard cavity, this snorkel cannot be plumbed to an airbox, as it is shortened specifically to clear the relay box in the guard cavity, so this does not have to be re-located. If you are looking to do the fully plumbed twin set up, please see the specific package.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Vdj70 Lh Snorkel. Powder Coated Satin Black. (No Lh Airbox Fitted) - FFVDJ-SNLH-SPC
$1,460.00
VDJ70 LH″ Snorkel.
To add symmetry back to your vehicle after fitting a Fatz Built snorkel to the RH side of your Cruiser, just add a LH snorkel. This snorkel is designed to mirror our RH snorkel and uses the same mounting style and locations. Threaded inserts do need to be fitted to secure the snorkel, with no factory locations on the LH side. Built in 316 grade stainless steel, finished to a seamless form and either powder coated satin black or polished to a 320 grain finish. Specifically designed to terminate in the guard cavity, this snorkel cannot be plumbed to an airbox, as it is shortened specifically to clear the relay box in the guard cavity, so this does not have to be re-located. If you are looking to do the fully plumbed twin set up, please see the specific package.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Polished Finish. Suit 3.25" Airbox Inlet - FFVDJ24-SNRH-POL-325
$1,460.00
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed specifically for the MY24 Face lift vehicles, utilizing the factory mounting points with sturdy 3 mm stainless brackets, also using the lower and front factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel entry is finished with a laser cut infill with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Powder Coated Satin Black. Suit 3.25" Airbox Inlet - FFVDJ24-SNRH-SPC-325
$1,460.00
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed specifically for the MY24 Face lift vehicles, utilizing the factory mounting points with sturdy 3 mm stainless brackets, also using the lower and front factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel entry is finished with a laser cut infill with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Polished Finish. Suit 4" Airbox Inlet - FFVDJ24-SNRH-POL-4
$1,460.00
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed specifically for the MY24 Face lift vehicles, utilizing the factory mounting points with sturdy 3 mm stainless brackets, also using the lower and front factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel entry is finished with a laser cut infill with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION My24 On Vdj70 Rh Snorkel. Powder Coated Satin Black. Suit 4" Airbox Inlet - FFVDJ24-SNRH-SPC-4
$1,460.00
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Designed specifically for the MY24 Face lift vehicles, utilizing the factory mounting points with sturdy 3 mm stainless brackets, also using the lower and front factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel entry is finished with a laser cut infill with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
