MSA 4X4 Bt50 Right Storage Drawer System - 41003
$1,437.30
$1,597.00
MSA BT50 RIGHT STORAGE DRAWER SYSTEM-41003
SUITS: Mazda BT50
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Bt50 Left Storage Drawer System - 41002
$1,437.30
$1,597.00
MSA BT50 LEFT STORAGE DRAWER SYSTEM-41002
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Ford Ranger & Mazda Bt50 Right Storage Drawer...
$1,437.30
$1,597.00
MSA RANGER & BT50 RIGHT STORAGE DRAWER SYSTEM-E1350-BT50-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Suits Ford Ranger PX, PX2, PX3 & Mazda BT50 UP, UR
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Bt50 Xt/Xtr/Gt Single Cab Front Seat Covers- -...
$458.10
$509.00
VEHICLE DATE: 09/2020-Current
PRODUCT TYPE: Canvas Seat covers
SUITS: BT50 XT/XTR/GT Single Cab
Single Cab, twin bucket seats with integrated headrests, airbag, console cover and integrated lumbar support
MSA 4X4 Bt50 Xt/Xtr/Gt Dual Cab Rear Seat Covers- -...
$363.60
$404.00
VEHICLE DATE: 09/2020-Current
PRODUCT TYPE: Canvas Seat covers
SUITS: BT50 XT/XTR/GT Dual Cab
2nd row, 60/40 base with 3 headrests and no armrest
MSA 4X4 Bt50 Xt/Xtr/Gt Dual Cab Front & Rear Seat...
$828.00
$920.00
VEHICLE DATE: 09/2020-Current
PRODUCT TYPE: Canvas Seat covers
SUITS: BT50 XT/XTR/GT Dual Cab
Complete front and rear covers, leather and fabric seats - (21007 + 21010)
MSA 4X4 Bt50 Xt/Xtr/Gt Dual Cab Front & Rear Seat...
$781.20
$868.00
VEHICLE DATE: 09/2020-Current
PRODUCT TYPE: Canvas Seat covers
SUITS: BT50 XT/XTR/GT Dual Cab
Complete front and rear covers - (21007 + 21008)
MSA 4X4 Power Fold Towing Mirrors Mazda Bt50 September 2020-Current...
$1,529.10
$1,699.01
MSA 4X4 Power Fold Towing Mirrors TM1655 Mazda BT50 September 2020-current
Chrome, Electric, Heated, Indicators, Blind Spot Monitoring, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-cast aluminium components
5 Year Warranty
MSA 4X4 Power Fold Towing Mirrors Mazda Bt50 September 2020-Current...
$1,529.10
$1,699.01
MSA 4X4 Power Fold Towing Mirrors TM1654 Mazda BT50 September 2020-current
Black, Electric, Heated, Indicators, Blind Spot Monitoring, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-cast aluminium components
5 Year Warranty
MSA 4X4 Power Fold Towing Mirrors Mazda Bt50 September 2020-Current...
$1,507.50
$1,675.00
MSA 4X4 Power Fold Towing Mirrors TM1653 Mazda BT50 September 2020-currentnt
Chrome, Electric, Indicators, Blind Spot Monitoring, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-cast aluminium components
5 Year Warranty
MSA 4X4 Power Fold Towing Mirrors Mazda Bt50 September 2020-Current...
$1,507.50
$1,675.00
MSA 4X4 Power Fold Towing Mirrors TM1652 Mazda BT50 September 2020-currentnt
Black, Electric, Indicators, Blind Spot Monitoring, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-cast aluminium components
5 Year Warranty
MSA Mazda Bt50 Towing Mirrors (Chrome, Electric, Indicators, Blind Spot...
$888.30
$987.00
Description
MAZDA BT50 TOWING MIRRORS
Year: Sept 2020 - CurrentModel: Mazda BT50 (Chrome, Electric, Indicators, Blind Spot Monitoring)Part Number: TM1603
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
MSA Mazda Bt50 Towing Mirrors (Chrome, Electric, Heated, Indicators, Blind...
$882.90
$981.00
Description
MAZDA BT50 TOWING MIRRORS
Year: Sept 2020 - CurrentModel: Mazda BT50 (Chrome, Electric, Heated, Indicators, Blind Spot Monitoring)Part Number: TM1605
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
MSA Mazda Bt50 Towing Mirrors (Chrome, Electric, Blind Spot Monitoring)...
$837.90
$931.00
Description
MAZDA BT50 TOWING MIRRORS
Year: Sept 2020 - CurrentModel: Mazda BT50 (Chrome, Electric, Blind Spot Monitoring)Part Number: TM1601
DESIGNED & TESTED FOR TOWING!
MSA 4X4’s Patented Towing Mirrors feature a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position, to avoid the extended mirrors permanently protruding way off the sides of the vehicle!
We think differently at MSA 4X4, and believe that ‘towing’ mirrors is a restrictive description for an ‘all round driving and towing mirror’ like ours. Traditional ‘Towing mirrors’ are great for towing, but not great for daily driving.
Our new MSA 4X4 Towing Mirrors were designed specifically so that, when not towing, they still look proportionate to the size and styling of the vehicle. The unique design features a large single mirror that pivots on an extremely heavy-duty extension slide, that allows the mirror to be returned to its normal “non-towing” position to avoid the extended mirrors permanently protruding way off the sides of the vehicle.
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included:1 x Left hand side mirror1 x Right hand side mirror1 x Installation instructions
DIRECTION-PLUS Provent Oil Separator Kit D-Max, Mu-X / Bt-50 2020-2022...
$405.00
$450.00
Direction-Plus™ ProVent® oil separator kit PV645DPK suits Isuzu D-Max, MU-X and Mazda Bt-50 4JJ3-TCX (2020-2022) models. The ProVent® oil separator kit PV645DPK protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
HOW IT WORKS
Direction-Plus™ ProVent® system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
DIRECTION-PLUS Provent Oil Seperator Kit D-Max Mu-X Bt-50 - FM645DPK
$451.80
$502.00
Direction Plus™ Fuel Manager Pre-Filter Kit FM645DPK suits Isuzu D-Max, MU-X and Mazda Bt-50 4JJ3-TCX (2020-2022) models, protecting its engine against costly injector failure.
HOW IT WORKS
Installing a Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.This leaves the O.E.M fuel filter to do the final and finer filtration, ensuring you are maximising the protection of your diesel fuel system.
DIRECTION-PLUS Preline And Pre-Filter System Bt-50 - PL645DPK
$542.70
$603.00
Direction-Plus™ PreLine-Plus PL645DPK is an innovative pre-filter system for diesel fuel which suits Isuzu D-Max, MU-X and Mazda Bt-50 4JJ3-TCX (2020-2022) models. PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation.
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced.
WATER ALERT SYSTEM
The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
MSA Mazda Bt50 Front Bucket & 3/4 Bench Seat Cover...
$391.50
$435.00
Model: Mazda BT50 08/11 - 04/15
MSA Mazda Bt50 Front Twin Buckets (Airbag Seats) + Console...
$458.10
$509.00
Model: Mazda BT50 Series 2 Freestyle XT 05/15 - 12/16
MSA Mazda Bt50 Xt Dual Cab / Facelift Model 06/18...
$781.20
$868.00
Weight: 6 kg
Freight Dimensions: 36 × 26 × 38 cm
Position: Complete
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,160.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,159.92
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$4,719.88
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,479.92
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
