
TJM
XGS ROAMER BALANCE FRONT STRUT (EA) FOR TOYOTA PRADO 150 SERIES 11/09-10/13
$255.00
Installing a pair of XGS struts as part of a complete XGS Roamer 4x4 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. XGS struts will ensure your vehicle is 4x4 equipped and ready for your next adventure.
Shock Construction:
Twin Tube - 2mm inner tube wall & 1.5mm outer tube wall
Shock Design:
Nitrogen ChargedDesigned for everyday driving
Piston Bore:
40mm
Piston Rod:
18mm hard chrome plated
Lift:
0-50mm
Features:
High durability OE quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston seal
Package Weight:
5.00 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On
TOYOTA FJ CRUISER GSJ15R 03/11-08/16

TJM
XGS ROAMER BALANCE FRONT STRUT (EA) FOR TOYOTA PRADO 90 SERIES 06/96-02/03
$255.00
Installing a pair of XGS struts as part of a complete XGS Roamer 4x4 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. XGS struts will ensure your vehicle is 4x4 equipped and ready for your next adventure.
Shock Construction:
Twin Tube - 2mm inner tube wall & 1.5mm outer tube wall
Shock Design:
Nitrogen ChargedDesigned for everyday driving
Piston Bore:
40mm
Piston Rod:
18mm hard chrome plated
Lift:
0-50mm
Features:
High durability OE quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston seal
Package Weight:
5.00 kg
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
XGS REPLACEMENT BUSH KIT FOR TOYOTA PRADO
$15.00
XGS replacement bush kit to suit XGS and Series 4000 shock absorbers.
Suits XGS:
659TTB187A
659TTB188I
Suits Series 4000:
659XS187A
659XS188I
Package Weight:
0.25 kg
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03
TOYOTA PRADO 120 SERIES 03/03-10/09
TOYOTA HILUX 7th GEN 04/05-07/11
TOYOTA HILUX 7th GEN 08/11-08/15

TJM
XGS REPLACEMENT BUSH KIT FOR TOYOTA PRADO 90 SERIES
$15.00
XGS replacement bush kit to suit XGS and Series 4000 shock absorbers.
Suits XGS:
659TTB188A
Suits Series 4000:
659XS188A
Package Weight:
0.07 kg
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
XGS REPLACEMENT BUSH KIT FOR HYUNDAI TERRACAN / TOYOTA PRADO 90 SERIES
$15.00
XGS replacement bush kit to suit XGS and Series 4000 shock absorbers.
Suits XGS:
650TTB288A
Suits Series 4000:
650XS288A
Package Weight:
0.04 kg
Compatible Vehicles
HYUNDAI TERRACAN HP 11/01-12/08
TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
XGS REPLACEMENT BUSH KIT FOR TOYOTA PRADO 150 SERIES / TOYOTA FJ CRUISER
$15.00
XGS replacement bush kit to suit XGS and Series 4000 shock absorbers.
Suits XGS:
659TTB188L
Suits Series 4000:
659XS188L
Package Weight:
0.25 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On
TOYOTA FJ CRUISER GSJ15R 03/11-08/16

TJM
XGS REMOTE COIL OVER STRUT ASSEMBLY INC COIL SPRING - RHF FOR TOYOTA PRADO 150...
$1,150.00
The brand-new bi-directional adjustable remote reservoir Shock Absorber from XGS has arrived. XGS Remote has been designed to provide the ultimate off-road experience for both weekend adventurers and high performance off-road users. The unique 8 stage, separate compression and rebound adjustability provides a fully customised ride to suit any load application. The patented inbuilt hydraulic bump-stop provides the perfect solution for vehicles that experience shocks bottoming at high speeds or when heavily loaded. As the shock absorber reaches maximum compression, the internal bump stop progressively increases damping resistance for maximum impact control. As a result, the vehicle and occupants are protected from high stress loads. The innovative monotube design consists of a single wall construction which ensures direct heat dissipation. This coil over assembly includes the coil spring and has an adjustable spring seat for fine tuning of ride height.
Shock Design:
Nitrogen Charged, mono tube with remote reservoir
Construction:
3mm tube wall thickness
Piston Bore:
52mm
Piston Rod:
20mm hard chrome plated
Lift:
0-45mm
Suits:
Front right
Features:
8 stage adjustment of compression & reboundPosition sensitive dampingHigh durability rubber bushesIn-built hydraulic bump stopSteel braided high temp oil hoseAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valving
Package Weight:
16.20 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

TJM
XGS REMOTE SHOCK ASSEMBLY REAR - LHS FOR TOYOTA PRADO 150 SERIES 11/09-10/13
$649.00
The brand-new bi-directional adjustable remote reservoir Shock Absorber from XGS has arrived. XGS Remote has been designed to provide the ultimate off-road experience for both weekend adventurers and high performance off-road users. The unique 8 stage, separate compression and rebound adjustability provides a fully customised ride to suit any load application. The patented inbuilt hydraulic bump-stop provides the perfect solution for vehicles that experience shocks bottoming at high speeds or when heavily loaded. As the shock absorber reaches maximum compression, the internal bump stop progressively increases damping resistance for maximum impact control. As a result, the vehicle and occupants are protected from high stress loads. The innovative monotube design consists of a single wall construction which ensures direct heat dissipation. This coil over assembly includes the coil spring and has an adjustable spring seat for fine tuning of ride height.
Shock Design:
Nitrogen Charged, mono tube with remote reservoir
Construction:
3mm tube wall thickness
Piston Bore:
52mm
Piston Rod:
20mm hard chrome plated
Lift:
0-45mm
Suits:
Rear Left
Features:
8 stage adjustment of compression & reboundPosition sensitive dampingHigh durability rubber bushesIn-built hydraulic bump stopSteel braided high temp oil hoseHigh impact polypropylene stone guardHigh grade damping oilAutomatic multi-stage velocity controlled valving
Package Weight:
6.91 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

TJM
XGS ROAMER BALANCE REAR SHOCK (EA) FOR TOYOTA PRADO 120 SERIES 03/03-10/09/ TOYOTA 4RUNNER N130...
$199.00
Whether you are tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, installing XGS Roamer shock absorbers as part of a complete XGS Roamer 4x4 suspension upgrade will improve every aspect of your drive. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with XGS Roamer shock absorbers.
Shock Construction:
Twin Tube - 2mm inner tube wall & 1.5mm outer tube wall
Shock Design:
Nitrogen ChargedDesigned for everyday driving
Piston Bore:
40mm
Piston Rod:
18mm hard chrome plated
Lift:
0-50mm
Features:
High durability OE quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston seal
Package Weight:
4.00 kg
Compatible Vehicles
TOYOTA PRADO 120 SERIES 03/03-10/09
TOYOTA 4RUNNER N130 10/89-06/96

TJM
XGS REMOTE SHOCK ASSEMBLY REAR - RHS FOR TOYOTA PRADO 150 SERIES 11/09-10/13
$649.00
XGS Remote 4X4 High Performance Suspension - The brand-new bi-directional adjustable remote reservoir Shock Absorber from XGS has arrived. XGS Remote Performance 4x4 Suspension has been designed to provide the ultimate off-road experience for both weekend adventurers and high performance off-road users. The unique 8 stage, separate compression and rebound adjustability provides a fully customised ride to suit any load application. The patented inbuilt hydraulic bump-stop provides the perfect solution for vehicles that experience suspension bottoming at high speeds or when heavily loaded. As the suspension reaches maximum compression, the internal bump stop progressively increases damping resistance for maximum impact control. As a result, the vehicle and occupants are protected from high stress loads. The innovative monotube design consists of a single wall construction which ensures direct heat dissipation.
Shock Design:
Nitrogen Charged, mono tube with remote reservoir
Construction:
3mm tube wall thickness
Piston Bore:
52mm
Piston Rod:
20mm hard chrome plated
Lift:
0-45mm
Suits:
Rear right
Features:
8 stage adjustment of compression & reboundPosition sensitive dampingHigh durability rubber bushesIn-built hydraulic bump stopSteel braided high temp oil hoseHigh impact polypropylene stone guardHigh grade damping oilAutomatic multi-stage velocity controlled valving
Package Weight:
6.91 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

TJM
TJM CAMERA RELOCATION KIT SIGNATURE FOR TOYOTA PRADO 150 SERIES 11/17-ON
$50.00
Multi-Terrain Monitor Camera relocation kit for TJM T15 Alloy bull bar only without winch fitment. This kit relocates the camera from under the Toyota badge to underneath of the number plate centrally. This is to maintain the top down view of the Toyota camera system when a winch is not fitted to the bull bar. The camera is relocated to the centre of the bar beneath the number plate.
FEATURES:
Suits:
Toyota Prado 150 Series 11/17-On when fitting 070AP15N88O bull bar
Tech:
For models with Multi-Terrain Monitor Camera fitted and NO winch is fitted. Camera is relocated to the centre of bar beneath number plate
Note:
Plug in harness required for camera relocation 076WLKIT028
Package Weight:
4.42 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/17-On

TJM
TJM SIDE BAR MODULAR STEEL SAT BLACK 50MM FOR TOYOTA PRADO 150 SERIES 11/09-10/13 /...
$400.00
Genuine TJM Side Bars are designed to give your Prado total protection in the un-likely event of side impact whilst off roading. Designed to fit with TJM bull bars and integrate with TJM Side Steps as an option, you are sure to experience un-rivalled protection. Using TJM's solid steel side bar clamping system combined with a TJM Bull Bar you have completed your full off road protection kit to tackle any off road track and more. Our Side Bars are engineered to prevent air bag deployment for low level collisions, thanks to an integrated crumple zone for piece of mind and safety.
FEATURES:
Material:
Black powdercoat steel
Size:
50mm tube
ADR:
ADR Airbag Compliant
Suits:
Non KDSS LWB models only
Tech:
Only fits with modular side steps (735SBSSA88L)
Package Weight:
15.00 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17

TJM
TJM UNDERBODY GUARD FRONT STEEL BLACK FOR TOYOTA PRADO 120 SERIES/ TOYOTA FJ CRUISER GSJ15R
$225.01
Keep your vehicle's vital components out of the firing line with TJM's range of under-body guards. A simple collision with a tree stump or rock could cause significant damage to steering, engine sump or transmissions, leaving you stranded and out of pocket. TJM under-body guards will take the brunt of lower off-road collisions, ensuring vital components are shielded from direct impact. A black powdercoat finish and corrosion resistance offer additional protection.
FEATURES:
Material:
Electrocoated 3mm steel with black powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Kit:
Combine with Sump & Transmission Guard for total protection
Suits:
All models petrol & diesel Prado 120 & FJ Cruiser
Package Weight:
8.00 kg
Compatible Vehicles
TOYOTA PRADO 120 SERIES 03/03-10/09
TOYOTA FJ CRUISER GSJ15R 03/11-08/16

TJM
TJM UNDERBODY GUARD FRONT CONNECTION PLATE FOR TOYOTA PRADO 150 SERIES 11/17-10/24
$145.00
TJM front guard to bull bar protection connection plate. Must be used when installing a TJM Front Under Body Guard if a Bull bar has been installed on a Toyota Prado 150 11/17-On.
FEATURES:
Suits:
Toyota Prado 150 Series 11/17-On
Tech:
Required to fit front under guard 077SBFUG88L to TJM bull bar
Package Weight:
2.00 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/17-10/24

TJM
TJM HEADLIGHT WASHER PLUMBING KIT FOR TOYOTA PRADO 150 SERIES / TOYOTA LANDCRUISER WAGON 200...
$50.00
TJM Headlight washer plumbing kit required to refit Original Equipment washers. Includes washer nozzle, one way valve, Y-connector and hose.
FEATURES:
Suits:
Kit is required to refit OE headlight washers when fitting a bullbar
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 GXL
TOYOTA LANDCRUISER WAGON 200 SERIES 09/15-10/21 VX/SAHARA
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15

TJM
XGS COIL SPRINGS FRONT RAISED 0-50KG (PAIR) FOR ISUZU D-MAX RG 08/20-04/24 / MAZDA BT-50...
$310.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
0-50kg
Lift:
0-45mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
15.00 kg
Compatible Vehicles
ISUZU D-MAX RG 08/20-04/24 2Dr Cab Chassis Hi Rider
ISUZU D-MAX RG 08/20-04/24 Space C/Chas & Pick Up
ISUZU D-MAX RG 08/20-04/24 4Dr C/Chas & Pick Up
ISUZU MU-X UJ 08/21-On LS-U
ISUZU MU-X UJ 08/21-On LS-M
ISUZU MU-X UJ 08/21-On LS-T
MAZDA BT-50 TF 08/20-On Freestyle Cab Chassis
MAZDA BT-50 TF 08/20-On 4dr Cab Chassis & Pick up
TOYOTA PRADO 120 SERIES 03/03-10/09
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-10/24
TOYOTA FORTUNER GUN156R 09/20-On GX
TOYOTA FORTUNER GUN156R 09/20-On GXL
TOYOTA FORTUNER GUN156R 09/20-On Crusade
TOYOTA FJ CRUISER GSJ15R 03/11-08/16
TOYOTA HILUX 7th GEN 04/05-07/11
TOYOTA HILUX 7th GEN 08/11-08/15
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
HOLDEN COLORADO RG 07/16-06/20
LDV T60 SK8C 10/17-08/21 2Dr C/C & 4Dr Pick Up

TJM
XGS ROAMER BALANCE REAR SHOCK (EA) FOR TOYOTA PRADO 90 SERIES 06/96-02/03
$199.00
Whether you are tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, installing XGS Roamer shock absorbers as part of a complete XGS Roamer 4x4 suspension upgrade will improve every aspect of your drive. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with XGS Roamer shock absorbers.
Shock Construction:
Twin Tube - 2mm inner tube wall & 1.5mm outer tube wall
Shock Design:
Nitrogen ChargedDesigned for everyday driving
Piston Bore:
40mm
Piston Rod:
18mm hard chrome plated
Lift:
0-50mm
Features:
High durability OE quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston seal
Package Weight:
4.00 kg
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
XGS ROAMER 100KG LBA SUSPENSION KIT FOR TOYOTA PRADO 90 SERIES 06/96-02/03
$1,907.00
The XGS Roamer Suspension Kit is designed to improve the handling and stability of your vehicle, as well as provide a more comfortable ride. Designed and engineered in Australia to meet the specific challenges and demands of the Australian environment, we have considered the needs and requirements of Australian drivers and created a product that is well-suited to our conditions. This has ensured that the twin tube nitro gas XGS shock absorbers, coil or leaf springs, and other components withstand the rigors of driving off the beaten track and provide reliable performance over the long term. The shock absorbers in this kit are designed to provide a good balance between comfort and performance, making them suitable for a wide range of driving conditions. Whether you are towing a caravan around the country, enjoying an adventure off the beaten track or you are a tradie carrying your gear from job to job the XGS Roamer is just the ticket to take the lead on your next adventure.
Front Spring Suits LBA:
0-50kg
Front shock design:
Gas Charged Twin Tube - "Balance" tune for everyday driving.
Rear Spring Suits LBA:
100kg
Rear shock design:
Twin Tube - "Balance" tune for everyday driving.
Lift Height:
0-45mm
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
XGS REMOTE 150KG LBA SUSPENSION KIT FOR TOYOTA PRADO 150 SERIES
$4,576.98
The XGS Roamer Suspension Kit is designed to improve the handling and stability of your vehicle, as well as provide a more comfortable ride. Designed and engineered in Australia to meet the specific challenges and demands of the Australian environment, we have considered the needs and requirements of Australian drivers and created a product that is well-suited to our conditions. This has ensured that the twin tube nitro gas XGS shock absorbers, coil or leaf springs, and other components withstand the rigors of driving off the beaten track and provide reliable performance over the long term. The shock absorbers in this kit are designed to provide a good balance between comfort and performance, making them suitable for a wide range of driving conditions. Whether you are towing a caravan around the country, enjoying an adventure off the beaten track or you are a tradie carrying your gear from job to job the XGS Roamer is just the ticket to take the lead on your next adventure.
Front Spring Suits LBA:
60kg+
Front shock design:
Gas Charged Mono tube with remote reservoir
Rear Spring Suits LBA:
150kg
Rear shock design:
Mono tube with remote reservoir
Lift Height:
0-45mm
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

TJM
XGS ROAMER 100KG LBA SUSPENSION KIT FOR TOYOTA PRADO 90 SERIES 06/96-02/03
$1,907.00
The XGS Roamer Suspension Kit is designed to improve the handling and stability of your vehicle, as well as provide a more comfortable ride. Designed and engineered in Australia to meet the specific challenges and demands of the Australian environment, we have considered the needs and requirements of Australian drivers and created a product that is well-suited to our conditions. This has ensured that the twin tube nitro gas XGS shock absorbers, coil or leaf springs, and other components withstand the rigors of driving off the beaten track and provide reliable performance over the long term. The shock absorbers in this kit are designed to provide a good balance between comfort and performance, making them suitable for a wide range of driving conditions. Whether you are towing a caravan around the country, enjoying an adventure off the beaten track or you are a tradie carrying your gear from job to job the XGS Roamer is just the ticket to take the lead on your next adventure.
Front Spring Suits LBA:
0-50kg
Front shock design:
Gas Charged Twin Tube - "Balance" tune for everyday driving.
Rear Spring Suits LBA:
100kg
Rear shock design:
Twin Tube - "Balance" tune for everyday driving.
Lift Height:
0-45mm
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
XGS ROAMER 150KG LBA SUSPENSION KIT FOR TOYOTA PRADO 150 SERIES
$1,890.01
The XGS Roamer Suspension Kit is designed to improve the handling and stability of your vehicle, as well as provide a more comfortable ride. Designed and engineered in Australia to meet the specific challenges and demands of the Australian environment, we have considered the needs and requirements of Australian drivers and created a product that is well-suited to our conditions. This has ensured that the twin tube nitro gas XGS shock absorbers, coil or leaf springs, and other components withstand the rigors of driving off the beaten track and provide reliable performance over the long term. The shock absorbers in this kit are designed to provide a good balance between comfort and performance, making them suitable for a wide range of driving conditions. Whether you are towing a caravan around the country, enjoying an adventure off the beaten track or you are a tradie carrying your gear from job to job the XGS Roamer is just the ticket to take the lead on your next adventure.
Front Spring Suits LBA:
0-50kg
Front shock design:
Gas Charged Twin Tube - "Balance" tune for everyday driving.
Rear Spring Suits LBA:
150kg
Rear shock design:
Twin Tube - "Balance" tune for everyday driving.
Lift Height:
0-45mm
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

TJM
XGS ROAMER 150KG LBA SUSPENSION KIT FOR TOYOTA PRADO 120 SERIES 03/03-10/09
$1,977.01
The XGS Roamer Suspension Kit is designed to improve the handling and stability of your vehicle, as well as provide a more comfortable ride. Designed and engineered in Australia to meet the specific challenges and demands of the Australian environment, we have considered the needs and requirements of Australian drivers and created a product that is well-suited to our conditions. This has ensured that the twin tube nitro gas XGS shock absorbers, coil or leaf springs, and other components withstand the rigors of driving off the beaten track and provide reliable performance over the long term. The shock absorbers in this kit are designed to provide a good balance between comfort and performance, making them suitable for a wide range of driving conditions. Whether you are towing a caravan around the country, enjoying an adventure off the beaten track or you are a tradie carrying your gear from job to job the XGS Roamer is just the ticket to take the lead on your next adventure.
Front Spring Suits LBA:
0-50kg
Front shock design:
Gas Charged Twin Tube - "Balance" tune for everyday driving.
Rear Spring Suits LBA:
150kg
Rear shock design:
Twin Tube - "Balance" tune for everyday driving.
Lift Height:
0-45mm
Compatible Vehicles
TOYOTA PRADO 120 SERIES 03/03-10/09

TJM
TJM BULL BAR T15 BLACK STEEL FOR TOYOTA PRADO 90 SERIES 06/96-02/03(IN STORE PICK UP...
$1,700.00
TJM's genuine T15 bull bar blends style and features at a great price for your Prado. The TJM bull bar is 4x4 equipped with indicator park lights, and has provision for winch mounting with an optional winch mount. It's ready to work for you with mounting points for installing large driving lights. A stylish 76mm centre tube and 50mm outer tubes offer strength and help protect your vehicles drive and headlights. Tapered side-wings assist with approach angle when off-road and taking on rises in the terrain. Thick steel tubing provides first-class protection and comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility.
FEATURES:
Material:
Black Powdercoat Steel
Size:
76mm Centre Tube 50mm Outer Tube
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Winch:
Optional winch mount rated to 9500lb/4300kg (957MTT1588K)
Indicators:
Indicator Park Lights
Lights:
Suits up to 230mm dia. Driving lights or TJM Seeker & Ultima light ranges
Package Weight:
65.00 kg
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
TJM BATTERY FRAME STEEL BLACK FOR TOYOTA PRADO 90 SERIES
$89.00
Genuine TJM auxiliary battery trays are built tough to withstand corrosion, heat and under-bonnet space limitations. Precision engineering ensures comfortable battery accommodation and secure under-bonnet mounting in the most appropriate location. Starting with 2mm thick sheet steel construction and fabricated with strategic folds and MIG welds gives TJM battery trays superior structural strength. A smooth black powdercoat finish offers long-lasting corrosion resistance. When only the best will do, insist on a TJM battery tray.
Specifications
FEATURES:
Material: Constructed from 2mm thick steel with black powdercoat finish
Design: Press folded and welded in strategic areas for maximum strength to stand the toughest conditions
Suits: 260mm long battery
Tech: Right front engine bay fitment
Models: 3.0L Turbo Diesel
Package Weight: 2.10 kg
Compatible Vehicles
TOYOTA PRADO 90 SERIES 06/96-02/03
TOYOTA PRADO 120 SERIES 03/03-10/09

TJM
TJM BATTERY FRAME STEEL BLACK FOR TOYOTA PRADO 150 SERIES
$149.00
Genuine TJM auxiliary battery trays are built tough to withstand corrosion, heat and under-bonnet space limitations. Precision engineering ensures comfortable battery accommodation and secure under-bonnet mounting in the most appropriate location. Starting with 2mm thick sheet steel construction and fabricated with strategic folds and MIG welds gives TJM battery trays superior structural strength. A smooth black powdercoat finish offers long-lasting corrosion resistance. When only the best will do, insist on a TJM battery tray.
Specifications
FEATURES:
Material: Constructed from 2mm thick steel with black powdercoat finish
Design: Press folded and welded in strategic areas for maximum strength to stand the toughest conditions
Suits: 305mm long battery
Tech: Right front engine bay fitment
Models: 2.8L Turbo Diesel models only 06/15-On
Package Weight: 3.50 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

TJM
TJM WINCH FRAME MOUNT KIT FOR TOYOTA PRADO 90
$350.00
Sturdy steel bolt-on winch mount kit to suit TJM T15 bull bar that is designed to spread the winch load evenly across the chassis. Suits up to 9500lb/4300kg rated winches. Landcruiser Prado 90 Series. Read Less Compatible Vehicles TOYOTA PRADO 90 SERIES 06/96-02/03

TJM
TJM OUTBACK BULL BAR BLACK STEEL FOR TOYOTA PRADO 150 SERIES 11/13-10/17(IN STORE PICK UP...
$2,300.00
TJM OUTBACK BULL BAR BLACK STEEL: Get ahead of the pack with this hefty pack mule! It'll take whatever you throw at it - 4x4 equipped with full wrap cato straps, 50mm outer pipework, steel winch-mount, optional LED fog and combination lights, reinforced T-slot recovery jack points, dual aerial mounts, mounting points for large driving lights - and still ask for more. Ready for adventure, the Outback Bull Bar offers superior protection and a classic, rugged styling you won't find anywhere else!
TOYOTA PRADO 150 SERIES 11/13-10/17

Torqit
TORQIT MODULEMAP: REMOTE REMAP FOR 120 SERIES 3.0L PRADO (11/2007 10/2009)MMP2
$1,791.00
$1,990.00
MODULEMAP FOR TOYOTA PRADO 120 SERIES 3.0L : 11/2007 – 10/2009
PERFORMANCE GAIN: 31KW / 98NM
Access your Prado’s full potential with European race technology. A super-fast and powerful ECU programming tool, the ModuleMap allows you to calibrate and optimise your 120 Series 3.0L , Prado factory settings.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your vehicle safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your vehicle to stock performance

Torqit
TORQIT MODULEMAP: REMOTE REMAP FOR TOYOTA PRADO 120 SERIES 02/2003 39356
$1,791.00
$1,990.00
MODULEMAP FOR TOYOTA PRADO 120 SERIES 3L: 02/2003 – 10/2007
Access the full potential of your 120 Prado with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your 120 Prado safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your Prado to stock performance

Torqit
TORQIT KIT1004PT POWER MODULE & PEDAL TORQ PACKAGE FOR TOYOTA HILUX, PRADO 120 & 150...
$1,530.00
$1,700.00
As the Torqit Power Module improves your vehicle's power and towing capacity across the board, the Torqit Pedal Torq throttle controller boosts the accelerator's responsiveness to elevate your truck's drivability to the fullest.
Power Module
The chip significantly improves the air to fuel ratio, creating less fuel usage, yet producing more power. Even better, This unit can be used as a hardwired or a Bluetooth controlled module.
No need to choose which one you would like. Once the Power Module is installed on a vehicle, it is automatically set to the highest performance mode.
Should you want to do some tweaking, simply download Torqit's Connect app and scan the barcode on the back of the module. This will enable a user to remotely tune the engine depending on preferred driving style or driving condition.
The Bluetooth mode has three optimum settings to choose from; Economy, Cruise and Sport, each increasing with power and torque.
Pedal Torq
The hard wired throttle control is fixed to a driver's dash, allowing easy access to adjust settings. It has three driving modes, each with customised settings (21 settings). These give a driver the ability to finely tune the vehicle’s accelerator to suit his or her personal driving preferences.

Torqit
TORQIT KIT1006PT POWER MODULE & PEDAL TORQ PACKAGE FOR TOYOTA HILUX, PRADO 120 & 150...
$1,530.00
$1,700.00
As the Torqit Power Module improves your vehicle's power and towing capacity across the board, the Torqit Pedal Torq throttle controller boosts the accelerator's responsiveness to elevate your truck's drivability to the fullest.
Power Module
The chip significantly improves the air to fuel ratio, creating less fuel usage, yet producing more power. Even better, This unit can be used as a hardwired or a Bluetooth controlled module.
No need to choose which one you would like. Once the Power Module is installed on a vehicle, it is automatically set to the highest performance mode.
Should you want to do some tweaking, simply download Torqit's Connect app and scan the barcode on the back of the module. This will enable a user to remotely tune the engine depending on preferred driving style or driving condition.
The Bluetooth mode has three optimum settings to choose from; Economy, Cruise and Sport, each increasing with power and torque.
Pedal Torq
The hard wired throttle control is fixed to a driver's dash, allowing easy access to adjust settings. It has three driving modes, each with customised settings (21 settings). These give a driver the ability to finely tune the vehicle’s accelerator to suit his or her personal driving preferences.

Torqit
TORQIT KIT1059PT POWER MODULE & PEDAL TORQ PACKAGE FOR TOYOTA FORTUNER, HILUX, PRADO 150 SERIES
$1,530.00
$1,700.00
As the Torqit Power Module improves your vehicle's power and towing capacity across the board, the Torqit Pedal Torq throttle controller boosts the accelerator's responsiveness to elevate your truck's drivability to the fullest.
Power Module
The chip significantly improves the air to fuel ratio, creating less fuel usage, yet producing more power. Even better, This unit can be used as a hardwired or a Bluetooth controlled module.
No need to choose which one you would like. Once the Power Module is installed on a vehicle, it is automatically set to the highest performance mode.
Should you want to do some tweaking, simply download Torqit's Connect app and scan the barcode on the back of the module. This will enable a user to remotely tune the engine depending on preferred driving style or driving condition.
The Bluetooth mode has three optimum settings to choose from; Economy, Cruise and Sport, each increasing with power and torque.
Pedal Torq
The hard wired throttle control is fixed to a driver's dash, allowing easy access to adjust settings. It has three driving modes, each with customised settings (21 settings). These give a driver the ability to finely tune the vehicle’s accelerator to suit his or her personal driving preferences.

Torqit
TORQIT PTP1022 PEDAL TORQ PLUS TO SUIT TOYOTA FJ CRUISER, HILUX & PRADO
$539.10
$599.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany

Torqit
UNLEASH YOUR ENGINE: TORQIT 3" DPF BACK EXHAUST TOYOTA PRADO 150 SERIES(PICK UP ONLY) -...
$1,790.00
Refine your vehicle's exhaust system with the top-notch stainless steel Torqit DPF Back Exhaust. Suits Toyota Prado 150 Series. Experience the power

Torqit
TORQIT CRM1059 POWER MODULE TO SUIT TOYOTA FORTUNER, HILUX & PRADO 150 SERIES
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry

Clearview
CLEARVIEW RAW NEXT GEN TOWING MIRRORS POWER-FOLD, INDICATORS, ELECTRIC TOYOTA PRADO 150 SERIES NOV 2017...
$1,345.50
$1,495.00
CLEARVIEW Next Gen Towing Mirrors Power-Fold, Indicators, Electric Toyota Prado 150 Series Nov 2017 to 2023-CVNG-TP-150S-FIEX
Mirror Features: Power-Fold, Indicators, Electric
Finish: Raw
Suits:Toyota Prado 150 Series Nov 2017 to 2023
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

Clearview
CLEARVIEW RAW NEXT GEN TOWING MIRRORS POWER-FOLD, INDICATORS, ELECTRIC TOYOTA PRADO 150 SERIES NOV 2009...
$1,345.50
$1,495.00
CLEARVIEW Next Gen Towing Mirrors Power-Fold, Indicators, Electric Toyota Prado 150 Series Nov 2009 - Oct 2017-CVNG-TP-150S-FIEX
Mirror Features: Power-Fold, Indicators, Electric
Finish: Raw
Suits:Toyota Prado 150 Series Nov 2009 - Oct 2017
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

Clearview
CLEARVIEW RAW NEXT GEN TOWING MIRRORS INDICATORS, ELECTRIC TOYOTA PRADO 150 SERIES NOV 2017 TO...
$922.50
$1,025.00
CLEARVIEW Next Gen Towing Mirrors Indicators, Electric Toyota Prado 150 Series Nov 2017 to 2023-CVNG-TP-150S-IEX
Mirror Features: Indicators, Electric
Finish: Raw
Suits:Toyota Prado 150 Series Nov 2017 to 2023
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

Clearview
CLEARVIEW RAW NEXT GEN TOWING MIRRORS INDICATORS, ELECTRIC TOYOTA PRADO 150 SERIES NOV 2009 -...
$922.50
$1,025.00
CLEARVIEW Next Gen Towing Mirrors Indicators, Electric Toyota Prado 150 Series Nov 2009 - Oct 2017-CVNG-TP-150S-IEX
Mirror Features: Indicators, Electric
Finish: Raw
Suits:Toyota Prado 150 Series Nov 2009 - Oct 2017
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

Clearview
CLEARVIEW RAW NEXT GEN TOWING MIRRORS HEAT, POWER-FOLD, INDICATORS, ELECTRIC TOYOTA PRADO 150 SERIES NOV...
$1,381.50
$1,535.00
CLEARVIEW Next Gen Towing Mirrors Heat, Power-Fold, Indicators, Electric Toyota Prado 150 Series Nov 2017 to 2023-CVNG-TP-150S-HFIEX
Mirror Features: Heat, Power-Fold, Indicators, Electric
Finish: Raw
Suits:Toyota Prado 150 Series Nov 2017 to 2023
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

Clearview
CLEARVIEW RAW NEXT GEN TOWING MIRRORS HEAT, POWER-FOLD, INDICATORS, ELECTRIC TOYOTA PRADO 150 SERIES NOV...
$1,381.50
$1,535.00
CLEARVIEW Next Gen Towing Mirrors Heat, Power-Fold, Indicators, Electric Toyota Prado 150 Series Nov 2009 - Oct 2017-CVNG-TP-150S-HFIEX
Mirror Features: Heat, Power-Fold, Indicators, Electric
Finish: Raw
Suits:Toyota Prado 150 Series Nov 2009 - Oct 2017
The Next Gen Towing Mirrors are the flagship model from Clearview| designed to offer unparalleled visibility and convenience. These mirrors feature a double mirror design with a large| flat 1:1 ratio top mirror for true distance reflection and a smaller convex bottom mirror to expand your field of vision. Perfect for all your towing needs| the Next Gen mirrors extend 180mm and include a variety of advanced features.
Features:
Large flat top mirror and smaller convex bottom mirror
Extends 180mm for optimal towing visibility
Power fold and manual fold options
Available in black| chrome| and raw finishes
Options for: Built-in 360-degree camera provision| auto-adjust| heating| indicators| memory adjustment| and blind spot monitoring
Why You Should Buy:
With advanced technology and a robust design| the Next Gen Towing Mirrors are perfect for serious towing enthusiasts who require maximum visibility and functionality on the road.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

TJM
REMOTE STRUT RESERVOIR MOUNT KIT - REAR PAIR FOR TOYOTA PRADO 150 SERIES
$199.00
Package Weight:
0.20 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

TJM
REMOTE STRUT RESERVOIR MOUNT KIT - FRONT PAIR FOR TOYOTA PRADO 150 SERIES
$199.00
Package Weight:
0.20 kg
Compatible Vehicles
TOYOTA PRADO 150 SERIES 11/09-10/13
TOYOTA PRADO 150 SERIES 11/13-10/17
TOYOTA PRADO 150 SERIES 11/17-On

Front Runner
Front Runner Lexus GX 470/Toyota Prado 120 (2003-2009) Ditch Mount A-Pillar Light Brackets -VACC039
$44.00
$49.00
Durable spot light mounts for your Lexus GX470 / Toyota Prado 120 (2003-2009).
Installs easily to the hood latch using existing factory bolts. No drilling required.
This Bracket allows fitment of various pod lights to increase field of vision at night.
Can also be used to mount small antenna's.
Sold in pairs.
Features
Consists of:
2 x Lexus GX470 / Toyota Prado 120 (2003-2009) Ditch Mount A-Pillar Light Brackets
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
221mm (8.7") L x 122mm (4.8") W x 77mm (3") H
Weight:
1kg (2.2lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 150 (2010-CURRENT) SLIMSPORT ROOF RACK KIT -KSTP003T
$1,430.00
$1,589.00
Gear up your Toyota Rav4 (2019-Current) for any adventure with the Slimsport Roof Rack Kit. The Slimsport was designed for activity-focused drivers that do not require an expedition-grade build. It has a low-profile and is compatible with over 55 Front Runner accessories.
This low-profile flat deck Slimsport rack has a load-carrying area of 1676mm (66") x 1175mm (46.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Rav4 (2019-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Additional drilling is required for the RAV4 LE models.Note: The panoramic glass roof is not operational when this Rack Kit is installed. For panoramic glass roof the Toyota Rav4 (2019-Current) Slimline II Roof Rack Kit is suited, or Toyota Rav4 Adventure / TRD-Offroad (2019-Current) Slimline II Roof Rack Kit for adventure model.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1 x Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit1 x RRAC238 - Toyota Rav4 (2019-Current) Slimsport Rack Wind Fairing1 x RRAC971 - Protection stripInstallation HardwareFitting Instructions
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Dimensions: 1676mm (66") L x 1175mm (46.3") W x 135mm (5.3") H
Approximate Installed Weight: 34.74kg (76.59lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 330mm (13")Length: 1705mm (67")Height: 220mm (9")
Shipping Weight:Weight: 35kg (77lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 95 SLIMLINE II ROOF RACK KIT -KRTP015L
$1,970.00
$2,189.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for your Toyota Prado 95 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTP015L - Toyota Prado 95 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASP104 - No 4 Plus Leg 180mm (Pair) - by Front Runner
1 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.9kg (79.0lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 120 SLIMLINE II 1/2 ROOF RACK KIT -KRTP014T
$1,555.00
$1,728.00
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Toyota Prado 120. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTP014T - Toyota Prado 120 Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FATP002 - Toyota Prado 120 Foot Rails - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 27kg (59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 31.0kg (68.2lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 120 SLIMLINE II ROOF RACK KIT -KRTP012T
$2,069.00
$2,299.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Toyota Prado 120. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTP012T - Toyota Prado 120 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATP002 - Toyota Prado 120 Foot Rails - by Front Runner
1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 38.9kg (85.5lbs)

Direction-Plus
DIRECTION-PLUS FUEL MANAGER POST-FILTER + CATCH CAN KIT PRADO 150 / 155 SERIES (PFPV620DPC)
$668.70
$743.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ Fuel Manager Post-filter + Provent Ultimate Catch Can Kit, preserving your diesel engine from water contamination, costly injector failure, carbon build-up and reduced performance. With this dual kit you can‘t go wrong!
Direction Plus™ Fuel Manager Post-Filter + Provent Ultimate Catch Can Dual Kit – PFPV620DPC is designed and engineered in Australia to suit:
Toyota Prado 150/155 series 1GD-FTV (2.8L 4cyl) 2015-2023
HOW DOES IT WORK?
FUEL MANAGER POST-FILTER
Contaminated fuel can have germs, water, or particles inside jerry cans and even from service stations. Repairing the damage caused by fuel contamination in an engine can cost more than $10,000!!!
THE SOLUTION
To ensure that you get the best protection, we recommend installing Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engines against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system
BENEFITS OF A FUEL MANAGER POST-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
*Some post filter kits contain 5 micron assemblies for fuel flow requirements, check for specific kit contents
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
Check fitment guide below to confirm suitability for your vehicle.

Direction-Plus
DIRECTION-PLUS FUEL MANAGER POST-FILTER KIT TOYOTA PRADO 120 / 150 / 155 (PF620DPK)
$409.50
$455.00
Direction Plus™ Fuel Manager Post-Filter Kit PF622DPK is designed and engineered in Australia to suit Toyota Prado 120, 150 and 155 models, protecting its engine against costly injector failure.
This kit fits:
Toyota Prado 120 Series 1KD-FTV (3.0L 4cyl) 2003 – 2009
Toyota Prado 120 Series 1KZ-TE (3.0L 4cyl) 2003 – 2007
Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl) 2009 – 2015
Dual battery compatible
Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2015 – On
Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2015 – On
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.