Front Runner
FRONT RUNNER FORD F-150 5.5' SUPER CREW (2009-CURRENT) DOUBLE LOAD BAR KIT -KRFF023
$817.00
$908.00
Transport all your adventure gear safely over the bed of your Ford F-150 Super Crew with this pair of strong, sleek, low-profile Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.02kg (26.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 8.8kg (19lbs)
Front Runner
FRONT RUNNER FORD F-150 RAPTOR (2009-CURRENT) SLIMLINE II ROOF RACK KIT / LOW PROFILE -KRFF018T
$1,816.00
$2,018.00
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation.
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFF001 - Ford F-150 Super Crew (2009-Curr) Foot Rails/Low1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.81kg (74.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 310mm (12")Shipping Weight:Weight: 30kg (66lbs)
Front Runner
Front Runner Ford F-150 Crew Cab w/ Sunroof (2015-2020) Slimsport Rack Wind Fairing -RRAC233
$213.00
$237.00
Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
Front Runner
Front Runner Ford F-150 Crew Cab w/ Sunroof (2015-2020) Slimsport Rack 40in Light Bar Wind...
$213.00
$237.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting instructionsMaterials used:Black powder coated steelProduct Dimensions:1405mm (55.3") L x 210mm (8.3") W x 206mm (8.1") HWeight:4.55kg (10lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2021-CURRENT) SLIMSPORT RACK WIND FAIRING -RRAC237
$235.00
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing adds a bold look while channeling air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford Ranger T6 / Wildtrak / Raptor (2012-2022) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Works with or without a sunroof.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2021-CURRENT) SLIMSPORT RACK 40IN LIGHT BAR WIND FAIRING -RRAC236
$235.00
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Lightbar wind fairing for the Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2015-2020) SLIMSPORT RACK WIND FAIRING -RRAC240
$235.00
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford F150 Super Crew (2015-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Works with or without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2015-2020) SLIMSPORT RACK 40IN LIGHT BAR WIND FAIRING -RRAC239
$235.00
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Light Bar Wind Fairing for the Ford F-150 Super Crew (2015-2020) Slimsport Roof Rack Kit / Lightbar ready
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Works with or without a sunroof
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2009-CURRENT) SLIMLINE II ROOF RACK KIT / LOW PROFILE...
$1,816.00
$2,018.00
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling into the vehicle's roof is required.
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling into the vehicle's roof is required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFF001 - Ford F-150 Super Crew (2009-Curr) Foot Rails/Low1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.81kg (74.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 300mm (12")Shipping Weight:Weight: 33kg (73lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2009-CURRENT) SLIMLINE II ROOF RACK KIT -KRFF017T
$1,834.00
$2,038.00
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling is required for installation.
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.NOTE: Moon roof tilt function not operational with under rack table fitment.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FAFF004 - Ford F-150 Super Crew (2009-Current) Foot Rails - by Front Runner1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumhigh strength steel
Approximate Installed Weight 26kg (58lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (17.7")Length 1750mm (69")Height 300mm (11.8")
Shipping Weight:
Weight 34kg (75lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2009-CURRENT) PRO BED RACK KIT -PBFF001T
$2,835.00
$3,150.00
Get ready to massively up the gear-carrying capacity in the load bed area of your Ford F-150 with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55 + available other rack accessories can go on the Slimline II—no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Ford F-150 Crew Cab load bed.
Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket,Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Ford F-150 Crew Cab with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x PBFF001S - Ford F-150 Crew Cab (2009-Current) Pro Bed System3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 76.38kg (168.39lbs)
Shipping Dimensions:Width: 650mm (26")Length: 1720mm (68")Height: 480mm (19")
Shipping Weight:Weight: 80kg (176lbs)
Front Runner
FRONT RUNNER FORD F-150 6.5' (2015-CURRENT) ROLL TOP SLIMLINE II LOAD BED RACK KIT -KRFF015T
$1,901.00
$2,112.00
This kit creates a full-size rack that sits above your Ford F-150’s (2015 +) 6.5' load bed with roll top. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1560mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing roll top rails.
This kit creates a full-size rack that sits above your Ford F-150’s (2015 +) 6.5' load bed with roll top. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1560mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing roll top rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS027 - Leg Spacer 6mm (Pair)3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM08 - SLII Tray - 1475mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.58kg (63.01lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18")Length: 1730mm (68")Height: 265mm (10")Shipping Weight:Weight: 37.9kg (83lbs)
Front Runner
FRONT RUNNER FORD F-150 6.5' (2009-CURRENT) SLIMLINE II LOAD BED RACK KIT -KRFF020T
$2,409.00
$2,677.00
Haul more with this full-size, tough-as-nails Ford F-150 6.5' rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford F-150 truck bed and contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the supplied Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.44kg (86.95lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 33.8kg (74lbs)
Front Runner
Front Runner Ford E150/E250/E350 Regular Cab (1992-2014) Slimline II Roof Rack Kit -KRFE010T
$3,146.00
$3,495.00
A roof rack is an invaluable load-carrying tool for anyone serious about adventure. This off-road tough, modular roof rack is designed specifically for Ford Regular Cabs (E150/E250/E350). This taller kit has space for mounting Front Runner tables underneath the rack and is compatible with over 55 accessories tailored to a wide range of sports and adventures.
This 2772mm/109.1" long, full-size, Slimline II cargo carrying roof rack kit for your Ford E150/E250/E350 Regular Cab contains the Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount Legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:4x LASS027 - Leg Spacer 6mm (Pair)2x LASS103 - No 3 Leg 155mm (Pair)3x LASS104 - No 4 Leg 170mm (Pair)1x RRSTP14 - SLII Tray - 1575mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 52.38kg (115.48lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 54kg (119lbs)
Front Runner
FRONT RUNNER FORD F-150 5.5' (2009-CURRENT) ROLL TOP SLIMLINE II LOAD BED RACK KIT -KRFF019T
$2,085.00
$2,317.00
Haul more with this full-size, tough-as-nails Ford F-150 5.5' rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford F-150 5.5' truck bed and contains the Slimline II tray (1575mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov\
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.12kg (75.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 33.8kg (74lbs)
Front Runner
FRONT RUNNER FORD EXCURSION (2000-2005) SLIMLINE II ROOF RACK KIT -KRFE012T
$1,767.00
$1,963.00
Turn your Ford Excursion into the ultimate cargo carrier with this 1762mm/69.4" long Slimline II Roof Rack kit. With 55+ available rack accessories, your Ford can now easily carry your camping, overland or sports gear. No adventure is off limits once you transform your Ford with this space-saving rack kit.
This 1762mm/69.4" long, Slimline II cargo carrying roof rack kit for the Ford Excursion contains the Slimline II Tray, Wind Deflector and 6 Feet. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x FASS025 - Foot Set / 70mm - 80mm1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)1x WDST007 - Wind Deflector 45mm Lip Pair/1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.53kg (62.9lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 36kg (79lbs)
Front Runner
FRONT RUNNER FORD EVEREST (2022-CURRENT) SLIMLINE II ROOF RACK KIT -KRFE011T
$2,048.00
$2,276.00
This Slimline II roof rack kit certainly readies your Ford Everest for any adventure on any terrain. Did you know that the Slimline II Rack Kit for the Ford Everest U704 is Ford-approved? The sizeable Slimline II Tray will greatly increase your cargo and sports gear-carrying capabilities, so there are no excuses for leaving behind your camp, overland, or sports gear
This 1964mm/77.3” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFE002 - Ford Everest (2022-Current) Foot Rails1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 38.8kg (85.53lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 43.17kg (95lbs)
Front Runner
FRONT RUNNER FORD EVEREST (2015-2021) SLIMLINE II ROOF RACK KIT -KRFE001T
$1,867.00
$2,074.00
This 1762mm/69.4” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
This 1762mm/69.4” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFE001 - Ford Everest (2015-2021) Foot Rails1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.47kg (82.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 37.6kg (83lbs)
Front Runner
Front Runner Ford E150/E250/E350 Extended Cab (1992-2014) Slimline II Roof Rack Kit -KRFE008T
$4,253.00
$4,726.00
Turn your heavy duty van into the ultimate adventuremobile with the Ford E150/E250/E350 Extended Cab Slimline II Roof Rack Kit. Mount your adventure gear on the roof so you can always have enough interior space to work or play.
This 3524mm/138.7" long, full size , Slimline II cargo carrying roof rack kit for your Ford E150/E250/E350 Extended Cab contains the Slimline II Tray and Wind Deflector, as well as 12 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x LASP104 - No 4 Plus Leg 180mm (Pair)5x LASS027 - Leg Spacer 6mm (Pair)3x LASS103 - No 3 Leg 155mm (Pair)2x LASS104 - No 4 Leg 170mm (Pair)2x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 36.77kg (81.06lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 43.8kg (96lbs)
Front Runner
Front Runner Ford E150/E250/E350 Extended Cab (1992-2014) Slimline II 3/4 Roof Rack Kit -KRFE007T
$3,149.00
$3,499.00
Turn your heavy duty van into the ultimate adventuremobile with the Ford E150/E250/E350 Extended Cab Slimline II 3/4 Roof Rack Kit. Mount your adventure gear on 3/4 of the roof so you can always have enough interior space to work or play.
Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x LASP104 - No 4 Plus Leg 180mm (Pair)4x LASS027 - Leg Spacer 6mm (Pair)2x LASS103 - No 3 Leg 155mm (Pair)2x LASS104 - No 4 Leg 170mm (Pair)1x RRSTP14 - SLII Tray - 1575mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 53.08kg (117.02lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 53.8kg (118lbs)
Front Runner
FRONT RUNNER FORD DC (2012-2022) SLIMLINE II ROOF RACK KIT -KRFM005T
$1,382.00
$1,535.00
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford DC contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford DC contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FASS024 - Foot Set / 50mm - 60mm1x FASS014 - Foot Set - Angled / 65mm1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.11kg (55.36lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 140mm (6")Shipping Weight:Weight: 28.43kg (63lbs)
Front Runner
FRONT RUNNER FORD BRONCO 4 DOOR W/HARD TOP (2021-CURRENT) SLIMLINE II ROOF RACK KIT -KRFB004T
$2,471.00
$2,745.00
Turn your Ford Bronco 4 Door into the ultimate adventure truck with this Slimline II Roof Rack Kit. This highly versatile and durable rack was designed specifically for the four-door with a hard top. It boasts a unique modular design that allows you to customize it with a range of purpose-built accessories to suit your load-hauling, travel and adventure-sports lifestyle.
This 2570mm/101” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector, front Foot Rails that fit to the factory accessory mounting points on the top of the windshield frame and the rear rails that clamp on using the rear factory clamp points to mount the Slimline II Tray.
No drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails allow for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allows the fitment of a Table that mounts under the rear of the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFB002 - Ford Bronco 4D w/Hard Top (2021-Curr) Foot Rails1x RRSTD13 - SLII Tray - 1255mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.78kg (100.93lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 290mm (11")Shipping Weight:Weight: 51kg (112lbs)
Front Runner
FRONT RUNNER FORD BRONCO 2 DOOR (2022-CURRENT) SLIMLINE II ROOF RACK KIT -KRFB005T
$2,302.00
$2,558.00
Introducing our tough Slimline II Cargo Roof Rack Kit: an 85.3" Slimline II Tray, Wind Deflector, and 4 Foot Rails for precision mounting. Our sturdy racks will allow you to adventure confidently in your iconic Ford Bronco.
This 2166mm/85.3” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and a set of four (4) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFB004 - Ford Bronco 2 Door (2022-Curr) Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 39.26kg (86.55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 290mm (11")
Shipping Weight:Weight: 46kg (101lbs)
Front Runner
Front Runner Ford Bronco (2021-Current) Ditch Mount A-Pillar Light Brackets -VACC042
$40.00
$45.00
Get your Ford Bronco ready to light up the world with these useful Ditch Mount A-Pillar Light Brackets. It is simple to install and a great place to mount extra pod-type lights. Brackets can also be used to house a small antenna.
Durable spot light mounts for your Ford Bronco.
Installs easily to the hood latch using existing factory bolts. No drilling required.
This Bracket allows fitment of various pod lights to increase field of vision at night.
Can also be used to mount small antenna's.
Sold in pairs.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:2 x Ford Bronco Ditch Mount A-Pillar Light BracketsFitment GuideInstallation Hardware
Materials used:Black powder-coated high strength steel
Product Dimensions:70mm (2.8") L x 116mm (4.6") W x 47mm (1.9") H
Weight:464g (16.4oz)
Front Runner
FRONT RUNNER FORD BRONCO (1966-1977) SLIMLINE II ROOF RACK KIT -KRFB001T
$2,183.00
$2,426.00
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Bronco contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Bronco contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:
4 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 34kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 455mm (18")Length 1610mm (63")Height 250mm (10")
Shipping Weight:
Weight 39.1kg (86.0lbs)
Front Runner
Front Runner Fiat Fullback (2016-Current) Slimline II Roof Rack Kit -KRFF022T
$1,380.00
$1,533.00
Take your Fiat Fullback (2016-2019) on new adventures with this Slimline II Roof Rack Kit. The full-sized rack helps clear interior space and gives even more cargo-carrying ability for your adventure gear and toys.
This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Fiat Fullback. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAMT001 - Mitsubishi Triton/L200 / 5th Gen Foot Rails1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.26kg (62.3lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 250mm (10")Shipping Weight:Weight: 27.8kg (61lbs)
Front Runner
Front Runner Fiat Ducato (L5H2/159in WB/High Roof) (2014-Current) Slimpro Van Rack Kit -KVFR005T
$2,838.00
$3,153.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L5H2/159" WB) high roof vans with a vehicle length of 6363mm / 250.5".
Load-carrying area: 3928mm (154.6") x 1565mm (61.6").
Ten (10) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:5x FAVF002 - FPCR Foot Set - by Front Runner2x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm2x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:3928mm (154.6") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 42.17kg (92.97lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 46.35kg (102lbs)
Front Runner
Front Runner Fiat Ducato (L4H2/159in WB/High Roof) (2014-Current) Slimpro Van Rack Kit -KVFR004T
$2,693.00
$2,992.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L3H2/159" WB) high roof vans with a vehicle length of 5998mm / 236.1".
Load-carrying area: 3580mm (141") x 1565mm (61.6").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:4x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps5x RRNS1475 - Narrow Slat / 1475mm (Pair)2x SPVT004 - Van Rack Side Profile / 1762mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:3580mm (141") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 40.94kg (90.26lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 44.35kg (98lbs)
Front Runner
Front Runner Fiat Ducato (L2H2/136in WB/High Roof) (2014-Current) Slimpro Van Rack Kit -KVFR003T
$2,174.00
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L2H2/136" WB) high roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.35kg (80lbs)
Front Runner
Front Runner Fiat Ducato (L2H1/136in WB/Low Roof) (2014-Current) Slimpro Van Rack Kit -KVFR002T
$2,174.00
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L2H1/136" WB) low roof vans with a vehicle length of 5413mm / 213.1".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.35kg (80lbs)
Front Runner
Front Runner Fiat Ducato (L1H1/118in WB/Low Roof) (2014-Current) Slimpro Van Rack Kit -KVFR001T
$2,101.00
$2,335.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Fiat Ducato vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with 2014-Current Fiat Ducato (L1H1/118" WB) low roof vans with a vehicle length of 4963mm / 195.4".
Load-carrying area: 2570mm (101.2") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mm1x SPVT002 - Van Rack Side Profile / 1358mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2570mm (101.2") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 30.99kg (68.32lbs)
Fiat Ducato Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 35.35kg (78lbs)
Front Runner
Front Runner Extended Tow Neck / 300mm -TBAR011
$213.00
$237.00
This towing device allows you to extend the tow ball out from the tow bar when a spare tyre/bike rack is mounted on the rear door and additional clearance is needed.
Consists of:
1x Tow neck
1x Tow ball1x Pin
1x R-clip
Nuts and bolts kit
Materials used: Black powder-coated mild steel
Weight:5.2kg (11.5lbs)
SKU
TBAR011
Model #
TBAR011
Barcode #
6009542217956
Brand
Front Runner Outfitters
Shipping Weight
5.4000kg
Shipping Width
0.390m
Shipping Height
0.130m
Shipping Length
0.130m
Front Runner
FRONT RUNNER FORD BRONCO (2021-CURRENT) SIDE MOUNT LADDER -LAFB001
$261.00
$290.00
Get set for super quick and easy access to your gear on the Slimline II Roof Rack with this strong Ford Bronco Side Mount Ladder. You can now add or remove all types of gear to or from your rack with ease.
This ladder installs into the side profile channel of your Slimline II roof rack and is secured to the body of Ford Bronco between the fiberglass roof and the vehicle's body.
Suitable for the 2 door and 4 door models.
The ladder has 3 rungs.
Made of black powder-coated high-strength steel for maximum durability and strength.
Fitment guide and installation hardware included.
This ladder has a maximum load rating of 110kg/242.5lbs.
Drilling is required for installation.
Consists of:1 x Ford Bronco Side Ladder Installation HardwareFitting InstructionsMaterials used:Black powder-coated steel and aluminumProduct Dimensions:665mm (26.2") L x 243mm (9.6") W x 254mm (10") HWeight:3.4kg (7.5lbs)Load Rating: 110kg (242.5lbs)
Front Runner
Front Runner Footwell Water Tank -WTAN022
$239.00
$266.00
This cleverly designed 40l (10.6gal) polyethylene tank is extremely strong and is shaped to sit on the vehicle's floor behind the front seats.
This cleverly designed 40l (10.6gal) tank is extremely strong and is shaped to sit on the vehicle's floor behind the front seats.
Made from food grade polyethylene and is BPA free.
The cutout spans the transmission tunnel and the top section can be used as a nonslip floor or stacking supplies/luggage on top of.
This design allows for fitment into most vehicles.* Please check specs to confirm correct fitment before purchase.
If children are to be seated in the rear, the tank can be strapped to the front seat mounts using normal ratchet tie down straps.
The tank has plastic pipe fittings on each side for connection of a hose and tap. (Hose kits and taps are not included)
The Water Tank Hose Kit are sold seperately.
This product will not fit in the Toyota FJ Cruiser, Lexus GX 470, Suzuki Jimny or 3dr Jeep Wranglers.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Material used:Tank: BPA-free polyethyleneFittings: PlasticCapacity:40l (10.6gal)Product Dimensions:W 1200mm (47.2") x H 180mm (7.1") x L 250mm (9.8")Cut-out:W 210mm (8.3") - W 300mm (11.8") x H 110mm (4.3")Weight:4.98kg (11lbs)Special NotesSKU; CR1297-GY-COMP
Front Runner
Front Runner Foot Rail Sealing Kit -RRAC082
$28.00
$31.00
Seals the mounting holes in your roof when the Slimline II Rack and Foot Rails are removed. Secures into your roof using the supplied M6 screws, and a flip-over cap covers the screw head. The soft, yet durable, seal screws down tight, conforming to the surface of your roof to keep the elements out. Roof seals are easily removed when reinstalling the Slimline II Rack. Includes fitting instructions.
Note: Works only where M6 bolts are used to secure Foot Rails and is not compatible with the Toyota Hilux Revo.
Front Runner
Front Runner Expedition Rails - Middle Kit -KRXX001
$182.00
$202.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to convert 2 Front Runner Expedition Rail Front or Rear Kits into a Full Perimeter rail kit.
The Front Runner Expedition Rail - Middle Kit allows easy conversion to a full perimeter, safari style, basket shaped roof rack. Designed as an upgrade for owners of 2 Front Runner Expedition Rail - Front or Rear kits.•Install in minutes.•No drilling required.•Adds extra cargo support.•Attractive, low profile design.•Mounting hardware included.•Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.•Manufactured in corrosion resistant high density aluminum components.The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.PLEASE NOTE: the Front Runner Expedition Rail - Middle Kit only works in conjunction with 2 Front Runner Expedition Rail - Front or Rear Kits and is used to create a Full Perimeter rail.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:1x RRAC070 - Expedition Tubing Mid Section (700mm)3x RRAC073 - Expedition Rail Joiner PairMaterials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubingWeight:2,8kg (6lbs)
Front Runner
Front Runner Expedition Rail Kit - Front or Back -1475mm(W) -KRXM003
$97.00
$108.00
These rails enhance the functionality and visual aesthetics of your Slimline II Roof Rack, giving it an expedition-style appearance. This kit provides all the necessary hardware and components to effortlessly install the rails onto the front or back of a Front Runner Slimline II Roof Rack with a width of 1475mm.
Install in minutes.
No drilling is required.
Adds extra cargo support.
Attractive, low-profile design.
Mounting hardware included.
Powder coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion-resistant, high-density aluminum components.
The Expedition Rails add 63mm / 2.5” to the height of the roof rack.
The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC290 - Expedition Rail Tubing M (545mm)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1361mm (53.6") L x 21mm (0.8") W x 63mm (2.5") H
Weight:1.19 kg (2.6 lbs)
Front Runner
Front Runner Expedition Rail Kit - Front or Back -1425mm(W) -KRXJ003
$95.00
$106.00
These rails enhance the functionality and visual aesthetics of your Slimline II Roof Rack, giving it an expedition-style appearance. This kit provides all the necessary hardware and components to effortlessly install the rails onto the front or back of a Front Runner Slimline II Roof Rack with a width of 1425mm.
Install in minutes.
No drilling is required.
Adds extra cargo support.
Attractive, low-profile design.
Mounting hardware included.
Powder coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion-resistant, high-density aluminum components.
The Expedition Rails add 63mm / 2.5” to the height of the roof rack.
The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC289 - Expedition Rail Tubing J (520mm)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1310mm (51.6") L x 21mm (0.8") W x 63mm (2.5") H
Weight:1.16 kg (2.6 lbs)
Front Runner
Front Runner Expedition Rail Kit - Front or Back -1345mm(W) -KRXG003
$99.00
$110.00
These rails enhance the functionality and visual aesthetics of your Slimline II Roof Rack, giving it an expedition-style appearance. This kit provides all the necessary hardware and components to effortlessly install the rails onto the front or back of a Front Runner Slimline II Roof Rack with a width of 1345mm.
Install in minutes.
No drilling is required.
Adds extra cargo support.
Attractive, low-profile design.
Mounting hardware included.
Powder coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion-resistant, high-density aluminum components.
The Expedition Rails add 63mm / 2.5” to the height of the roof rack.
The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC085 - Expedition Rail Tubing 07 (480mm)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1231mm (48.5") L x 21mm (0.8") W x 63mm (2.5") H
Weight:1.1 kg (2.4 lbs)
Front Runner
Front Runner Expedition Rail Kit - Front or Back -1165mm(W) -KRXA003
$91.00
$101.00
These rails enhance the functionality and visual aesthetics of your Slimline II Roof Rack, giving it an expedition-style appearance. This kit provides all the necessary hardware and components to effortlessly install the rails onto the front or back of a Front Runner Slimline II Roof Rack with a width of 1165mm.
Install in minutes.
No drilling is required.
Adds extra cargo support.
Attractive, low-profile design.
Mounting hardware included.
Powder coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion-resistant, high-density aluminum components.
The Expedition Rails add 63mm / 2.5” to the height of the roof rack.
The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC287 - Expedition Rail Tubing A (390mm)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1051mm (41.4") L x 21mm (0.8") W x 63mm (2.5") H
Weight:0.97 kg (2.1 lbs)
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Front Runner
Front Runner Drop Down Table to Fridge Installation Kit -TBRA036
$26.00
$29.00
Instantly add table space for food prep or organization with our Drop Down Table Fridge Mounting Kit. This kit turns the side of your travel fridge into convenient workspace with quick and easy installation of the Front Runner Drop Down Table.
Includes a tie down strap and installation hardware.
Easy installation for secure, rattle-free transport.
Compatible with the Drop Down Tailgate Table (sold separately).
Note: For Fridges over 55l/14.5gal in capacity please purchase Strap Ratchet 4M Endless.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consist Of:1x Tie Down StrapInstallation HardwareFitment GuideMaterial used:Black WebbingProduct Dimensions:120mm(4.7")L x 60mm(2.4")W x 45mm(1.8")HWeight:0.43kg
Front Runner
Front Runner Cub Pack -SBOX001
$48.00
$53.00
Stop messing around with temporary cargo carrying solutions. Get down to business with these latching, stackable and durable storage containers.
These plastic compact sized storage boxes are easy to arrange in a cargo bed and vertical-sided to avoid wasted space.
The nesting lids design allows the Front Runner Cub Packs to stack securely to each other.
Made from black, high strength plastic.
More compact than the Wolf Pack Pro.
Integrated grips for easy carrying.
Versatile.
Suitable for exterior storage. For even greater protection on your vehicle, store in a Typhoon Bag.
Use in conjunction with Storage Box Foam Dividers or Stratchits as well as Black Tie Down Rings / Eye Nuts for a safe and secure roof rack storage solution.
Front Runner storage systems are configured around the Wolf Pack Pro and Cub Pack sizes to allow a comprehensive and practical storage solution.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Materials used:Black high density polyethelene (HDPE) plasticProduct Dimensions:L 440mm (17.3") x W 315mm (12.4") x H 210mm (8.3")Internal Dimensions:L 385mm (15.2") x W 270mm (10.6") x H 185mm (7.3")Weight:2.04kg (3.52lbs)Special NotesSKU; M-FRO/001
Front Runner
Front Runner Expedition Rail Kit - Sides - for 752mm (L) to 1358mm (L) Rack...
$159.00
$177.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 4-7 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit works with 7 Slat-long Front Runner Slimline II Roof Racks. If you would like to fit this kit to a rack with slats ranging from 4-6 slats, some cutting of the side rail tubing may be necessary, see the fitting instructions for further details.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:4x Tubular rails2x Cast LH drop downs2x Cast RH drop downs2x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1236mm (48.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.14kg (4.7lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 2772mm (L) Rack -KRXS014
$319.00
$354.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 14 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 14 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:10x Tubular rails2x Cast LH drop downs2x Cast RH drop downs8x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2652mm (104.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.6kg (10.1lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 2570mm (L) Rack -KRXS013
$275.00
$305.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 13 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 13 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardware
Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2450mm(96.5") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.27kg (9.4lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 2368mm (L) Rack -KRXS012
$267.00
$297.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 12 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 12 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2248mm (88.5") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.87kg (8.5lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 2166mm (L) Rack -KRXS011
$213.00
$237.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 11 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 11 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2046mm (80.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.6kg (7.9lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 1964mm (L) Rack -KRXS010
$178.00
$198.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 10 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 10 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1844mm (72.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.1kg (6.8lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 1762mm (L) Rack -KRXS009
$173.00
$192.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 9 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 9 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1642mm (64.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.9kg (6.4lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 1560mm (L) Rack -KRXS008
$173.00
$192.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 8 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 8 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular side rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminumProduct Dimensions:1440mm (56.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.56kg (5.6lbs)
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$439.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
