Front Runner
FRONT RUNNER LAND ROVER DISCOVERY 1AND2 LOAD BAR KIT / GUTTER MOUNT -KRLD026
$548.00
$609.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 265mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRLD026 - Land Rover Discovery 1&2 Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS109 - No 9 Leg 265mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 130mm (5")
Length 1540mm (61")
Height 195mm (8")
Shipping Weight:
Weight 9.7kg (21.4lbs)
Front Runner
FRONT RUNNER LAND ROVER DISCOVERY 3/4 AND LR3/LR4 LADDER -LALD004
$640.00
$711.00
A ladder that clips over the top of the Discovery 3 & 4s / LR3, LR4's rear door and bolts behind the license plate.
The ladder conforms to the contours of the vehicle and is constructed out of black powder coated 304 stainless steel to ensure durability and strength.
Easy installation: the top part of the ladder clips over the rear door and uses existing mounting points for fitment. No drilling required.
The top and bottom treads are textured for added grip and the top clip is lined with rubber to avoid damage to the vehicle's paint work.
Features
Consists of:
1 x Assembled ladder
1 x Z-bracket
Bolt kit
Materials used:
304 Stainless steel
Electroplated and black powder coated
Weight:
4kg (8.8lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 90/110 (1983-2016) STATION WAGON SPARE WHEEL CARRIER -RBLD001
$1,058.00
$1,175.00
A spare wheel carrier that mounts onto your Land Rover Defender 90 & 110 Station Wagon and keeps that spare wheel safe and secure.
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 90/110 (1983-2016) LADDER -LALD009
$270.00
$300.00
This ladder clamps onto the gutter and bolts to the vehicle body. The bottom rung mounts below the bumper using existing holes.
The ladder conforms to the contours of the vehicle and is made with off-road tough black powder-coated high-strength steel for maximum durability and strength.
Easy installation: The top part of the ladder clamps onto the gutter and bolts to the vehicle body (drilling required).
The bottom step mounts below the bumper using existing holes.
Features
Consists of:
1 x Land Rover Defender 90 110 (1983-2016) Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated steel & aluminium
Product Dimensions:
155mm (6.1") L x 230mm (9.1") W x 721mm (28.4") H
Weight:
4.51kg (9.9lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 90 (2020-CURRENT) SLIMLINE II ROOF RACK CONTOUR KIT -KRLD040T
$1,380.00
$1,533.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 90. Easily installs using the existing factory rails. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables.
An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit only allows your sunroof to operate in tilt/vent mode if an under rack table is fitted. Vehicles that are equipped with fabric roofs are not able to be opened if an under rack table is fitted.
Features
KRLD040T - Land Rover Defender 90 (2020-Current) Slimline II
Consisting of:
1x FALD011 - Land Rover Defender 90 (2020-Curr) Foot Rails/Mini
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57.33lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 23kg (51lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 90 (1983-2016) SLIMLINE II ROOF RACK KIT / TALL -KRLDT07L
$2,252.00
$2,502.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 90 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT07L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 41.0kg (90.2lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 90 (1983-2016) SLIMLINE II ROOF RACK KIT -KRLD007L
$2,216.00
$2,462.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 90 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD007L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 39.8kg (87.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1615mm (64"); Height: 140mm (6")
Shipping Weight:
Weight: 38.28kg (84lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 130 SLIMLINE II ROOF RACK KIT -KRLD043T
$2,551.00
$2,834.00
Get your extremely capable Land Rover Defender 130 ready for heavy gear-carrying duties with the modular Slimline II Roof Rack Kit. With over 55 accessories available for this tough rack, you can confidently tackle any adventure with the right gear.
This 2368mm/93.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Defender 130. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: The OEM Tracks need to be removed when fitting this Rack Kit. Vehicles with the panoramic sunroof, only the rear, large table can be fitted. If you fit the front table you will not be able to open the sunroof.
Features
KRLD043T - Land Rover Defender 130 Slimline II Roof Rack Kit
Consisting of:
1x FALD013 - Land Rover Defender 130 (2022-Curr) Foot Rails
1x RRSTD12 - SLII Tray - 1255mm(W)X2368mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.87kg (92.31lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 45kg (99lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 130 (1983-2016) SLIMLINE II LOAD BED RACK KIT -KRLD041T
$1,903.00
$2,115.00
This kit creates a full-size rack that sits above your Land Rover Defender 130's truck bed. This Slimline II rack kit contains the Slimline II tray (1575mm x 1358mm), two (2) tracks, and six (6) pickup truck bed universal legs that fit into the tracks.
All Front Runner rack kits contain installation instructions as well as all the components needed to mount the Slimline II tray to your vehicle.
All Front Runner racks are backed by a limited lifetime warranty*
Drilling is required to mount the track to the bed of your truck.
Features
KRLD041T - Land Rover Defender 130 (1983-2016) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS030 - Universal Load Bed Leg / Medium (Pair)
1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)
1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.6kg (71.87lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 265mm (10")
Shipping Weight:
Weight: 34kg (75lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110/130 (1983-2016) SLIMLINE II 1/2 ROOF RACK KIT / TALL...
$1,798.00
$1,998.00
This 1560mm/61.4" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110/130 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT05L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
3 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner
1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 29kg (64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight: 33.8kg (74.3lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110/130 (1983-2016) SLIMLINE II 1/2 ROOF RACK KIT -KRLD005L
$1,771.00
$1,968.00
This 1560mm/61.4" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110/130 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD005L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.8kg (78.8lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110 TDI/TD5 (1983-2006) / 2.8/V8 WATER TANK / 36L -WTLD001
$646.00
$718.00
This water tank comes with a mounting bracket and hose kit included
Mounts underneath your Land Rover Defender 110
Capacity: 36l (9.5gal)
Made from food grade polyethylene and BPA free
Features
Materials used:
BPA-free polyethylene
Dimensions (mm):
Slanted from 560W to 370W x 320H x 315L
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110 PUMA 2.2/2.4 (2007-2016) WATER TANK / 36L -WTLD002
$646.00
$718.00
This water tank comes with a mounting bracket and hose kit included
Mounts underneath your Land Rover Defender 110
Capacity: 36l (9.5gal)
Made from food grade polyethylene and BPA free
Features
Materials used:
BPA-free polyethylene
Dimensions (mm):
Slanted from 560W to 380W x 270H x 310L
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110 L663 (2020-CURRENT) SLIMLINE II ROOF RACK CONTOUR KIT -KRLD042T
$1,709.00
$1,899.00
This 1762mm/69.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 110 L663. Easily installs using the existing factory rails. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables.
An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD042T - Land Rover Defender 110 L663 (2020-Current) Slimline II Roof Rack Contour Kit
Consisting of:
1x FALD012 - Land Rover Defender L663 (2020-Cur) Contour Rail
1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.41kg (71.45lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1720mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 32kg (70lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110 (1983-2016) SLIMLINE II ROOF RACK KIT / TALL -KRLDT03L
$2,792.00
$3,102.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT03L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner
1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 42kg (93lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 49.0kg (107.8lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110 (1983-2016) SLIMLINE II ROOF RACK KIT -KRLD003L
$2,756.00
$3,062.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD003L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 42kg (92lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 48.8kg (107.3lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110 (1983-2016) SLIMLINE II 3/4 ROOF RACK KIT / TALL...
$2,397.00
$2,663.00
This 2166mm/85.3" 3/4 size Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD030L - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner
Consisting of:
4x LASS108 - No 8 Leg 250mm (Pair)1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 34.1kg (75.18lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 40.48kg (89lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER 110 (1983-2016) SLIMLINE II 3/4 ROOF RACK KIT -KRLD035T
$2,397.00
$2,663.00
This 2166mm/85.3" long, 3/4 size, Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLD035T - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit - by Front Runner
Consisting of:
4x LASS107 - No 7 Leg 225mm (Pair)
1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 42.74kg (94.23lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 43.4kg (95lbs)
Front Runner
Front Runner Land Rover Defender (2007-2016) Tail Light Protectors -LPLD006
$70.00
$78.00
Keep your vehicle's tail-lights protected from damage with these tough, plastic coated, tail-light protectors.
Made out of high strength steel.
Polyethylene plastic coated for protection against the elements.
Designed specifically for your Land Rover Defender.
Requires drilling.
Features
Consists of:
2x Large light protectors
4x Small light protectors
12x Self tapping screws
Materials used:
Black plastic-coated high strength steel
Weight:
1.1kg (2.4lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER (1983-2016) UNDER CONSOLE SAFE -SAFE008
$257.00
$285.00
This safe is bolted to the body of the vehicle under the original center console and is manufactured from 2mm thick mild steel. It features a tamper proof cam lock and is carpet lined to protect your valuables and prevent rattling.
Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Features
Consists of:
1x Under console safe
2x Keys supplied
Materials used:
Black powder-coated mild steel
Carpeted base
Product Dimensions:
433mm (17.1") L x 275mm (10.8") W x H 100mm (3.9")
Internal Dimensions:
375mm (14.8") L x 265mm W (10.4") (Raised section)/205mm (8.1") W (Lower Section) x 107mm (4.2") H
Weight:
3.2kg (7.1lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER (1983-2016) SLIMLINE II 1/2 ROOF RACK KIT / TALL -KRLDT01L
$1,686.00
$1,873.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLDT01L - Land Rover Defender (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
3x LASS108 - No 8 Leg 250mm (Pair)
1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 31.48kg (69.4lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 31.48kg (69lbs)
Front Runner
FRONT RUNNER LAND ROVER DEFENDER (1983-2016) LOAD BAR KIT / GUTTER MOUNT -KRLD024
$530.00
$589.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 225mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD024 - Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 130mm (5")
Length 1540mm (61")
Height 195mm (8")
Shipping Weight:
Weight 9.5kg (21.0lbs)
Front Runner
Front Runner Land Rover Defender (1983-2016) Head Light Protectors -LPLD005
$112.00
$125.00
Keep your vehicle's headlights protected from damage with these tough, plastic coated, headlight protectors.
Made out of high strength steel.
Polyethylene plastic coated for protection against the elements.
Mounts to existing mounting points on your Land Rover Defender and uses the original nuts and bolts.
Designed specifically for your Land Rover Defender.
Front Runner
Front Runner Land Rover Defender (1983-2006) Tail Light Guard -LPLD001
$75.00
$83.00
Made out of steel.
Polyethylene plastic coated for protection against the elements.
Designed specifically for your Land Rover Defender.
Requires drilling.
Features
Consists of:
2x Large light protectors
4x Small light protectors
12x Self tapping screws
Materials used:
Black plastic-coated high strength steel
Front Runner
FRONT RUNNER LAND ROVER ALL-NEW DISCOVERY 5 (2017-CURRENT) EXPEDITION SLIMLINE II ROOF RACK KIT -KRLD032T
$1,674.00
$1,860.00
This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment.
This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FALD007 - Land Rover All-New Discovery Foot Rails - by Front Runner1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 27kg (60lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")Length 1615mm (64")Height 250mm (10")
Shipping Weight:
Weight 31.9kg (70.1lbs)
Front Runner
FRONT RUNNER LAND ROVER ALL-NEW DISCOVERY (2017-CURRENT) DRAWER KIT -SSLD006
$3,527.00
$3,919.00
This drawer kit has 2 lockable drawers, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
113kg / 250 lb per drawer load carrying capacity.
High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base.
This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicles existing mounting points and the drawer mounting brackets. Removing the drawers is just as easy.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides.
Faceplates have 6 pre cut knock-outs for adding monitoring or electrical panel socket inserts.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, just insert 2 Cub Pack. Designed to fit inside Front Runner drawers, the Cub Pack can be used to further organize and move gear in and out of a vehicle.
To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer.
The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicles interior contours.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
All Front Runner Storage Systems are backed by a 2 year warranty.
The LAND ROVER ALL-NEW DISCOVERY DRAWER KIT allows access to the spare wheel winder through an access "port" in the top deck. There is no need to remove the drawers to lower the spare.
*Please Note: Cub Pack and Drawer Dividers are not included when purchasing this Drawer System and are sold separately.
Features
Consists of:
1 x Front Runner Drawer unit (SSDR002)
1 x Land Rover All-New Discovery Deck Completion Set
2 x Push to Close latch with 2 keys per lock
3 x Accessory Channels
6 x Eye Nuts for Accessory Channel
1 x T Wrench with 1 custom sockets for wheel winder
Installation Hardware including 4 turnbuckles to secure unit to vehicle
Fitting Instruction
Materials used:
Aluminum - Accessory Channels & Sub Frame
Black powder coated steel - Drawer Bins & Frame
Carpet & Laminated plywood - Top Deck & Deck Set
Product Dimensions:
Overall Dimensions:
974mm (38.3") L x 1324mm (52.1") W x 330mm (13") H
Interior Drawer Dimensions:
Left Hand Drawer:
914mm (36") L x 461mm (18.2") W x 208mm (8.2") H
Right Hand Drawer:
914mm (36") L x 373mm (14.7") W x 208mm (8.2") H
Weight:
82.4kg (181.7lbs)
Load Rating:
113Kg (250lbs) per Drawer
Special Notes:
Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.
Front Runner
Front Runner Lada Niva 4x4 Slimline II Roof Rack Kit -KRLN001T
$1,553.00
$1,725.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for your Lada Niva 4x4 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLN001T - Lada Niva 4x4 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3x LASS103 - No 3 Leg 155mm (Pair)1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.43kg (62.68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 26.96kg (59lbs)
Front Runner
Front Runner Kia Sorento (2016-2020) Slimline II Roof Rack Kit -KRKS002T
$1,953.00
$2,170.00
This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Kia Sorento 2016+. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRKS002T - Kia Sorento (2016-2020) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAKS002 - Kia Sorento (2016-Current) Foot Rails - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 32kg (71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 37.3kg (82.0lbs)
Front Runner
Front Runner Kayak Cradle -RRAC254
$182.00
$202.00
Designed to carry a variety of hull shapes as well as SUPs.
Each bracket has an independent pivoting saddle with an angle-setting lever.
The flexible cushioned pads protect the hull.
Large contact surface area for extra stability when transporting your kayaks.
Includes 2 x Tie Down Straps with protective buckle bumpers.
Installation hardware supplied.
Accommodates kayaks and SUPs up to 900mm/35.4" wide and 40kg/88.2 lbs.
Features
Consists of:
2 x Front Cradle Rests
2 x Rear Cradle Rests
2 x Straps
Installation Hardware
Fitting Instructions
Product Dimensions:
200mm (7.9") L x 100mm (3.9") W x 200mm (7.9") H
Weight:
3.1kg (6.8lbs)
Load Rating:
40kg (88.2lbs)
Front Runner
Front Runner Kayak Carrier / Foldable J Style -RRAC256
$233.00
$259.00
Designed to carry a variety of hull shapes as well as SUPs.
This is a J style Kayak foldable bracket.
The cushioned padded bars protect the hull.
Large contact surface area for extra stability when transporting your kayaks.
Includes 2 x Tie Down Straps with protective buckle bumpers.
Installation hardware supplied.
Features
Consists of:
2 x Foldable Kayak Carrier Brackets
2 x Tie Down Straps
Installation Hardware
Fitting Instructions
Open Dimensions
795mm (31.3") L x 426mm (16.8") W x 462mm (18.1") H
Closed Dimensions
472mm (18.6") L x 270mm (10.6") W x 102mm (4") H
Weight
5.17kg (11.4lbs)
Front Runner
FRONT RUNNER JEEP WRANGLER JL 2 DOOR (2018-CURRENT) EXTREME SLIMLINE II ROOF RACK KIT -KRJW035T
$2,589.00
$2,877.00
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JL 2 door including the Slimline II Tray (1425mm x 1762mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The Front Runner Jeep Extreme mounting system is secured to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight or stress on the hardtop itself.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJW035T - Jeep Wrangler JL 2 Door (2018-Current) Extreme Slimline II Roof Rack Kit
Consisting of:
1x FAJL005 - Jeep Wrangler JL 2- Door (2018-Curr) Foot Rails
1x FAJL006 - Jeep Wrangler JL 2-Door (2018-Curr) Inner Brackets
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x RRSTG09 - SLII Tray - 1345mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.11kg (84.02lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 320mm (13")
Shipping Weight:
Weight: 47kg (103lbs)
Front Runner
FRONT RUNNER JEEP WRANGLER JKU CARGO SLIDE -SSST003
$899.00
$999.00
This flat drawer can hold a refrigerator along with chairs, cargo boxes, and other gear. Or it can simply be used to easily access groceries and other everyday items.
Secure up to a 52L (or equivalent) size fridge, with additional room for storage -- such as the Front Runner Wolf Packs or Cub Boxes, tents, chairs, camp kitchen items, tool kits, etc.
Mounts to the existing tie down points in the bed of the JKU and does NOT REQUIRE DRILLING into your 2011 + Jeep Wrangler JKU.
Push to close dual latching lock securely keeps the unit closed and rattle-free.
Works with the factory Sub Woofer in place.
When extended, 100% full access to the storage cubby.
Features multiple tie down points for Stratchits or many other style straps.
Load Rating: 113 kg / 250 lbs.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
The Front Runner JK Cargo Slide is the perfect companion to the Jeep Wrangler JKU 4-Door Cargo Storage Interior Rack.
If you own a 2007 - 2010 JKU, installation of this product requires drilling 2 9mm holes into the body of your vehicle. See Installation Instructions for more details. This product was not designed for 2-Door JK models.
All Front Runner Storage Systems are backed by a 2 year warranty.
Features
Consists of:
1 x Flat Roller Drawer
1 x Front Mounting Strap
Installation Hardware
Materials used:
Black powder-coated mild steel
Product Dimensions:
852mm (33.5") L x 898mm (35.4") W x 128mm (5") H
Internal Tray Dimensions:
778mm (30.6") L x 780mm (30.7") W x 60mm (2.4") D
Weight:
29kg (63.9lbs)
Load Rating:
113 kg (250lbs)
Front Runner
FRONT RUNNER JEEP GRAND CHEROKEE WK2 (2011-2021) SLIMLINE II ROOF RACK KIT -KRJG011T
$1,654.00
$1,838.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Jeep Grand Cherokee WK2 contains the Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG011T - Jeep Grand Cherokee WK2 (2011-2021) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x FASS012 - Foot Set / 40mm - 50mm
1x FASS013 - Foot Set / 60mm - 70mm
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
1x TRJG004 - Jeep Grand Cherokee WKII (2011-2020) Tracks/1450mm
1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.56kg (62.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 29kg (64lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR JT (2019-CURRENT) SLIMLINE II ROOF RACK KIT -KRJG009T
$1,405.00
$1,561.00
This 954mm/37.6" long, full-size, Slimline II cargo carrying roof rack kit for your Jeep Gladiator JT contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG009T - Jeep Gladiator JT (2019-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2x LASS027 - Leg Spacer 6mm (Pair)
3x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair)
1x RRSTM05 - SLII Tray - 1475mm(W)X954mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.9kg (54.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1730mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 25.4kg (56lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR JT (2019-CURRENT) SLIMLINE II LOAD BED RACK KIT -KRJG002T
$1,524.00
$1,693.00
This kit creates a full-size rack that sits above your Jeep Gladiator JTs load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 4 Pickup Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJG002T - Jeep Gladiator JT (2019-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (52lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 280mm (11")
Shipping Weight:
Weight 27.6kg (60.7lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR JT (2019-CURRENT) LOAD BED LOAD BAR KIT -KRJG003
$507.00
$563.00
If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution.
This kit is designed to work with the existing Jeep Gladiator JT factory bed rails and comes with a pair of 1425mm wide Front Runner Load Bars, 2 pairs of Front Runner Tall Load Bed Legs, and all the necessary hardware required to mount to the factory bed rails.
The Front Runner Load Bar Kit features 22mm thick HD aluminum extrusions (slats) that are used in the Slimline II Roof Rack, which means that these load bars can be used as slats in a similar width Slimline II Roof Rack.
Additionally, the sliding nut t-slots on the slats allow for unlimited and ultra-secure mounting positions, and accessories and equipment can be quickly removed as well.
Features
KRJG003 - Jeep Gladiator JT (2019-Current) Load Bed Load Bar Kit
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LBSK016 - Roof Load Bar Pair 1425mm(W)1x RRAC901 - Load Bed Nut Kit- Toyota Tacoma 2004+/Tundra 2007+
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.57kg (16.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 200mm (8"); Length: 1530mm (60"); Height: 130mm (5")
Shipping Weight:
Weight: 8kg (18lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR JT (2019-CURRENT) EXTREME SLIMLINE II ROOF RACK KIT -KRJG014T
$2,253.00
$2,503.00
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep Gladiator JT including the Slimline II Tray (1425mm x 1560mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The Jeep Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJG014T - Jeep Gladiator JT (2019-Current) Extreme Slimline II Roof Rack Kit
Consisting of:
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x FAJT001 - Jeep Gladiatorr JT (2019-Curr) Foot Rails
1x FAJT002 - Jeep Gladiator (2019-Curr) Inner Brackets
1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.22kg (71.03lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 315mm (12")
Shipping Weight:
Weight: 41kg (90lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR JT (2019-CURRENT) CAB OVER CAMPER SLIMLINE II ROOF RACK KIT -KRJG016T
$1,691.00
$1,879.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Please see the fitment instructions in the INSTALL tab for further installation information.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJG016T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini
1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 22.24kg (49.03lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 325mm (13")
Shipping Weight:
Weight: 31kg (68lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR JT (2019-CURRENT) CAB OVER CAMPER SLIMLINE II ROOF RACK KIT -KRJG010T
$1,637.00
$1,819.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Please see the fitment instructions in the INSTALL tab for further installation information.
Features
KRJG010T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount
1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini
1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.94kg (66.01lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 530mm (21")
Length: 1730mm (68")
Height: 380mm (15")
Shipping Weight:
Weight: 31kg (68lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR (2020-CURRENT) EGR ROLLTRAC SLIMLINE II LOAD BED RACK KIT -KRRT044T
$1,644.00
$1,827.00
This kit creates a full-size rack that sits above your Jeep Gladiator's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT044T - Jeep Gladiator (2020-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.55kg (62.94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 240mm (9")
Shipping Weight:
Weight: 28.8kg (63lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR (2020-CURRENT) EGR ROLLTRAC LOAD BED LOAD BAR KIT -KRRT012
$526.00
$584.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Jeep Gladiator when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1345mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT012 - Jeep Gladiator (2020-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK015 - Roof Load Bar Pair 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.66kg (16.89lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1460mm (57"); Height: 165mm (6")
Shipping Weight:
Weight: 8.2kg (18lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR (2019-CURRENT) PRO BED SYSTEM -PBJG001S
$1,079.00
$1,199.00
This tough, lightweight steel and aluminum system secures to the load bed of your Jeep Gladiator, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit several accessories to its sides or even a Front Runner rack. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system you can take along all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Jeep Gladiator load bed.
The Pro Bed System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket or Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the bed of your truck.
Secures to the load bed of the Jeep Gladiator with specific mounting brackets bolted to the existing factory mounting points.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
Features
PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBJG001 - Pro Bed Rack Jeep Gladiator mount bracket
2x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 81.09kg (178.77lbs)
Shipping Dimensions:
Width: 670mm (26")
Length: 1275mm (50")
Height: 345mm (14")
Shipping Weight:
Weight: 83kg (183lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR (2019-CURRENT) PRO BED RACK KIT -PBJG001T
$2,409.00
$2,677.00
Up your Jeep Gladiator's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the load bed of your Jeep. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Jeep Gladiator load bed.
Included in this Kit is the a 1225mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories,Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and the bed of your truck.
Secures to the bed of the Jeep Gladiator with specific mounting brackets bolted to the existing factory mounting points.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
PBJG001T - Jeep Gladiator (2019-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 101.86kg (224.56lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1720mm (68")
Height: 510mm (20")
Shipping Weight:
Weight: 112kg (246lbs)
Front Runner
FRONT RUNNER JEEP GLADIATOR (2019-CURRENT) FOLD-TOP SLIMLINE II BED RACK KIT -KRJG013T
$1,922.00
$2,136.00
This kit creates a full-size rack that sits above your Jeep Gladiator's truck bed with a Fold-Top cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 6 Pickup Roll Top/Top Mount Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRJG013T - Jeep Gladiator (2019-Current) Fold-Top Slimline II Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRAC002 - Universal Track / 1400mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.95kg (72.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 280mm (11")
Shipping Weight:
Weight: 34kg (75lbs)
Front Runner
FRONT RUNNER JEEP CHEROKEE SPORT XJ SLIMLINE II ROOF RACK KIT / TALL -KRJCT02L
$1,953.00
$2,170.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.65kg (67.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 35.26kg (78lbs)
Front Runner
FRONT RUNNER JEEP CHEROKEE SPORT XJ SLIMLINE II ROOF RACK KIT -KRJC002L
$1,936.00
$2,151.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJC002L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight 30kg (67lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.2kg (77.5lbs)
Front Runner
FRONT RUNNER JEEP CHEROKEE SPORT LOAD BAR KIT /GUTTER MOUNT -KRJC006
$465.00
$517.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRJC006 - Jeep Cherokee Sport Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1445mm (57")
Height 175mm (7")
Shipping Weight:
Weight 8.2kg (18.1lbs)
Front Runner
Front Runner James Baroud Quick Release Tent Channel Set / 6 Piece -TBMK035
$54.00
$60.00
A set of 6 plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 6 Piece.
These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes.
The Quick Release Tent Mount Kit / 6 Piece gives you the freedom to mount or remove the tent in seconds, and with no tools.
NOTE: Please refer to the channel plate dimensions to ensure correct selection and fitment.
Features
Consists of:
3 x pair of Nut Plates
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
85mm (3.4") L x 22.5mm (0.9") W x 4mm (0.16") H (Single Nut Plate)
Weight:
1.05kg (2.3lbs)
Front Runner
Front Runner James Baroud Quick Release Tent Channel Set / 4 Piece -TBMK034
$36.00
$40.00
A set of 4 plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 4 Piece.
These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes.
The Quick Release Tent Mount Kit / 4 Piece gives you the freedom to mount or remove the tent in seconds, and with no tools.
NOTE: Please refer to the channel plate dimensions to ensure correct selection and fitment.
Features
Consists of:
2 x pair of Nut Plates
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
85mm (3.4") L x 22.5mm (0.9") W x 4mm (0.16") H (Single Nut Plate)
Weight:
0.7kg (1.5lbs)
Front Runner
Front Runner James Baroud Quick Release Tent Channel Set -TBMK013
$16.00
$18.00
A set of plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 4 Piece (TBMK012).
These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes.
The Quick Release Tent Mount Kit / 4 Piece (TBMK012) gives you the freedom to mount or remove the tent in seconds, and with no tools.
Note: Only compatible with TBMK012.
For use with TBMK019 , TBMK020 and TBMK021 please use TBMK031 and TBMK032
Features
Consists of:
1 x Set of Nut Plates
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
85mm (3.3") L x 23.5mm (0.9") W x 5mm (0.2") H (Single Nut Plate)
Weight:
0.35kg (0.77lbs)
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$439.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
