
Front Runner
FRONT RUNNER TOYOTA RAV4 (2019-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY -KSTR002T
$1,300.00
$1,444.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1676mm (66") x 1175mm (46.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota Rav4 (2019-Current) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Please Note: Additional drilling is required for the RAV4 LE models.
Features
KSTR002T - Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner
Consisting of:
1x KSTR001 - Toyota Rav4 (2019-Current) Slimsport Roof Rack
1x RRAC220 - Toyota Rav4 Slimsport Rack 40" Light Bar Wind Fairing
1x RRAC971 - Protection Strip
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1676mm (66") L x 1175mm (46.3") W x 135mm (5.3") H
Approximate Installed Weight: 33.94kg (74.82lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1705mm (67")
Height: 220mm (9")
Shipping Weight:
Weight: 34kg (75lbs)

Front Runner
FRONT RUNNER TOYOTA QUANTUM SLIMLINE II ROOF RACK KIT -KRTQ003L
$2,756.00
$3,062.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Toyota Quantum/HiAce contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTQ003L - Toyota Quantum (2004-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 43kg (95lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 50.1kg (110.2lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 95 SLIMLINE II ROOF RACK KIT -KRTP015L
$1,970.00
$2,189.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for your Toyota Prado 95 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTP015L - Toyota Prado 95 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASP104 - No 4 Plus Leg 180mm (Pair) - by Front Runner
1 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (68lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.9kg (79.0lbs)

Front Runner
FRONT RUNNER TOYOTA PRADO 150 (2010-CURRENT) SLIMSPORT ROOF RACK KIT -KSTP003T
$1,430.00
$1,589.00
Gear up your Toyota Rav4 (2019-Current) for any adventure with the Slimsport Roof Rack Kit. The Slimsport was designed for activity-focused drivers that do not require an expedition-grade build. It has a low-profile and is compatible with over 55 Front Runner accessories.
This low-profile flat deck Slimsport rack has a load-carrying area of 1676mm (66") x 1175mm (46.3").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket Handle/Light Slimsport Rack Bracket.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota Rav4 (2019-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof.
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Additional drilling is required for the RAV4 LE models.Note: The panoramic glass roof is not operational when this Rack Kit is installed. For panoramic glass roof the Toyota Rav4 (2019-Current) Slimline II Roof Rack Kit is suited, or Toyota Rav4 Adventure / TRD-Offroad (2019-Current) Slimline II Roof Rack Kit for adventure model.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1 x Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit1 x RRAC238 - Toyota Rav4 (2019-Current) Slimsport Rack Wind Fairing1 x RRAC971 - Protection stripInstallation HardwareFitting Instructions
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Dimensions: 1676mm (66") L x 1175mm (46.3") W x 135mm (5.3") H
Approximate Installed Weight: 34.74kg (76.59lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:Width: 330mm (13")Length: 1705mm (67")Height: 220mm (9")
Shipping Weight:Weight: 35kg (77lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 78 SLIMLINE II 3/4 ROOF RACK KIT / TALL -KRTL040T
$2,216.00
$2,462.00
This 1964mm/77.3 long, 3/4 size, Slimline II cargo carrying roof rack kit for the 78 series Toyota Land Cruiser contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL040T - Toyota Land Cruiser 78 Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner
Consisting of:
4x LASS107 - No 7 Leg 225mm (Pair)
1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 40.99kg (90.37lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18")
Length: 1730mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 40.48kg (89lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 76 UNDER CONSOLE SAFE -SAFE009
$302.00
$335.00
The safe is bolted to the body of the vehicle and the original centre console reinstalled to the top of the safe.
Installs easily using supplied installation kit and installation guide.
This robust safe is manufactured with 2mm thick mild steel and a tamper proof cam lock.
Powder coated black.
Carpet lined.
Note: Not suitable for Left-hand drive vehicles.
Features
Consists of:
1x Under Console Safe
2x Keys supplied
Installation kit
Materials used:
Black powder-coated mild steel with carpeted base
Product dimensions:
L 535mm (21.1") x W 205mm (8.1") x H 205mm (8.1")
Weight:
4.3kg (9.5lbs)

Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 60 SLIMLINE II ROOF RACK KIT / TALL -KRTL041T
$2,312.00
$2,569.00
This 2166mm/85.3" long, full-size, Slimline II cargo carrying roof rack kit for the 60 Series Toyota Land Cruiser contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL041T - Toyota Land Cruiser 60 Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
1x LASD105 - No 5 Leg Diagonal 190mm (Pair)
1x LASS027 - Leg Spacer 6mm (Pair)
3x LASS104 - No 4 Leg 170mm (Pair)
1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.84kg (92.24lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 405mm (16")
Shipping Weight:
Weight: 39.46kg (87lbs)

Front Runner
FRONT RUNNER TOYOTA HILUX REVO DC (2016-CURRENT) TOURING DRAWER KIT -SSTH004
$3,293.00
$3,659.00
This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
180kg / 397lb drawer load carrying capacity.
Hold open feature: drawer locks open while parked on uneven surfaces.
High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
A fridge (footprint of 750mm x 425mm or smaller) can be installed on the left hand side of the drawer for access through a gullwing style window.
The right rear deck and back right side deck each have a cut out (215mm in diameter) to fit and secure a gas/propane bottle or similar shaped object.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
The deck is covered with a durable, UV resistant gray marine carpet detailed to complement the vehicles interior contours.
The nylon carpet insulates secured cargo from noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
No drilling is required when fitted without lift channels and when a standard canopy is used and tailgate is left in place.
If your vehicle has a canopy with a swing open door that has replaced the original tailgate, drilling 3 lifting channels (included) may be necessary.
All Front Runner Storage Systems are backed by a 2 year warranty.
*Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.
Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner.
Features
Consists of:
1 x Front Runner Drawer unit (SSDR012)
1 x Toyota Hilux Revo DC (2016-Current) Touring Deck Completion Set (SSDS108)
1 x Drawer System Wing Set (SSWS004)
1 x Push to close latch with 2 keys per lock
3 x Accessory channels
6 x Eye Nuts for accessory channels
Installation Hardware includes 4 turnbuckles to secure unit to vehicle with standard canopy
Fitting Instruction
Materials used:
Black powder coated steel - Drawer Bins, Frame & Front Covers
Nylon Carpet & Laminated Plywood - Top Deck & Deck Set
Product Dimensions:
Overall Dimensions:
1510mm (59.5") L x 1604mm (63.2") W x 335mm (13.2") H
Drawer Internal Dimensions:
1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") H
Weight:
80.5kg (177.5lbs)

Front Runner
FRONT RUNNER TOYOTA HILUX REVO DC (2016-CURRENT) SLIMLINE II ROOF RACK KIT -KRTH011T
$1,461.00
$1,623.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Hilux Revo Double Cab. Drilling into the vehicles roof is required to insert mounting hardware, a template is provided for hole placement.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTH011T - Toyota Hilux Revo DC (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATH002 - Toyota Hilux Revo DC (2016-Current) Foot Rails - by Front Runner
1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 25kg (56lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 620mm (24")
Length 1640mm (65")
Height 160mm (6")
Shipping Weight:
Weight 29.4kg (64.7lbs)

Front Runner
FRONT RUNNER TOYOTA HIACE SLWB HIGH ROOF (2019-CURRENT) SLIMPRO VAN RACK KIT -KVTH002T
$1,903.00
$2,114.00
Elevate your Toyota HiAce's gear-carrying game to unparalleled levels when you install Front Runner's low-profile Slimpro Van Kit. It's a great option for tradesmen such as plumbers and electricians. The versatile and adaptable roof rack has ample packing space so you can live the van life and not worry about where to put your gear.
Compatible with the Toyota HiAce LWB/SLWB High Roof (2019-Current) vans with a vehicle length of 5265mm / 207.3".
Load-carrying area: 2974mm (117") x 1344mm (52.9").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 131mm (5.2").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVTH002T - Toyota HiAce LWB/SLWB High Roof (2019-Current) Slimpro Van Rack Kit
Consisting of:
2x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm
1x FAVF006 - Volkswagen Crafter Van Rack Foot Set / 90mm
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
1x RRAC978 - Toyota HiAce LWB(2019-) SlimPro Rack Spacer
4x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT004 - Van Rack Side Profile / 1762mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimension:
2975mm (177.1") L x 1345mm (53") W x 135mm (5.3") H
Approximate Installed Weight: 28.57kg (62.99lbs)
Toyota Hiace Van Rack Kit heights are adjustable from 85mm (Z bracket inverted) to 131mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 445mm (18")
Length: 1770mm (70")
Height: 160mm (6")
Shipping Weight:
Weight: 35kg (77lbs)

Front Runner
Front Runner Toyota 4Runner 5th Gen Ditch Mount A-Pillar Light Brackets -VACC035
$44.00
$49.00
Durable spot light mounts for your Toyota 4Runner 5th Gen.
Installs easily to the hood latch using existing factory bolts. No drilling required.
This Bracket allows fitment of various pod lights to increase field of vision at night.
Can also be used to mount small antenna's.
Sold in pairs.
Features
Consists of:
2 x Toyota 4Runner 5th Gen Ditch Mount Light Brackets
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
171mm (6.7") L x 125mm (4.9") W x 72mm (2.8") H
Weight:
1kg (2.2lbs)

Front Runner
FRONT RUNNER FORD RANGER T6.2 (2022-CURRENT)/VOLKSWAGEN AMAROK (2023-CURRENT) DOUBLE CAB SLIMSPORT RACK 40IN LIGHT BAR...
$2,135.00
$2,372.00
This 2166mm/85.3 full-size Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and a set of Foot Rails to mount the Slimline II Tray to the 5th Gen Toyota 4Runner. Easily install using the eight existing factory mounting points. Drilling and no drilling mounting options are included to secure the front Foot Rails.
All Front Runner Rack Kits contain installation instructions and all the necessary components to mount the Slimline II Tray to your vehicle.
The vehicle-specific Foot Rails have openings for storing compatible gear under the rack, such as Front Runner tables.
An opening on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF054T - Toyota 4Runner (5th Gen) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FATF006 - Toyota 4runner (2009-Current) Full Rack Foot Rails1x RRAC961 - Toyota 4Runner (5th Gen) No Drill Installation Kit1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 41.379kg (91.22lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 41.84kg (92lbs)

Front Runner
Front Runner Telescopic Camping Light -LIGH218
$62.00
$69.00
Designed with an LED light panel of 47W, this light can perfectly illuminate a dark area.
Includes a 4.5m/14.7ft extendable rod, so you can install it at any height.
Comes with remote control.
Highly versatile, making it ideal for camping, picnics, outdoor barbecue or for doing late-night mechanical repairs.
Powered by your cars battery, 12V outlet, or a 12V power bank.
Note: This product is not waterproof and is not recommended to be used in wet weather conditions.
Features
Consists of:
1 x Lamp Plate
1 x 4.5m Fishing Rod
1 x Rod Stand
1 x 5M Car Output Wire with Cigarette Lighter
1 x Battery Clips
1 x Remote Controller
1 x Adjustable Bracket
1 x Carry Bag
Product Dimensions:
Carry Bag/Overall Dimensions:
780mm (30.7") L x 80mm (3.2") W x 150mm (5.9") H
LED Dimensions:
228mm (9") L x 113mm (4.4") W
Weight:
1.48kg (3.3lbs)
Special Notes:
Rod Length: 4.5M
Light power: 47w COB
Luminous flux: 4598LM
Input voltage: DC 12V

Front Runner
Front Runner Ford Ranger (2012-2022) Slimsport Rack 40in Light Bar Wind Fairing -RRAC191
$40.00
$44.00
Designed to temporarily mount the Front Runner Telescopic Camping Light.
Installs easily into the front, back or side profiles of your Slimline II rack or on the side of the Slimsport rack.
Made of steel and sealed in the same durable, black powder coating as your rack.
Features
Consists of:
1 x Telescopic Camp Light Rack Bracket
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
147mm (5.8") L x 68mm (2.7") W x 102mm (4") H
Weight:
0.6kg (1.3lbs)

Front Runner
FRONT RUNNER SUZUKI JIMNY (2018-CURRENT) SLIMLINE II 3/4 ROOF RACK KIT -KRSJ006T
$1,325.00
$1,472.00
This 1156mm/45.5" long, 3/4 size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 2018+ contains the Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
Note: This Suzuki Jimny Kit requires the use of the supplied 20mm Lip Wind Deflector.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ006T - Suzuki Jimny (2018-Current) Slimline II 3/4 Roof Rack Kit
Consisting of:
2x LASS102 - No 2 Leg 130mm (Pair)
1x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.77kg (52.4lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 25.69kg (57lbs)

Front Runner
FRONT RUNNER SUZUKI JIMNY (2018-CURRENT) LOAD BAR KIT -KRSJ007
$472.00
$524.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 130mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: Load carry limit and accessory compatibility is reduced with load bars, Please also check the maximum roof load capacity of your vehicle.
Features
KRSJ007 - Suzuki Jimny (2018-Current) Load Bar Kit
Consisting of:
2x LASS102 - No 2 Leg 130mm (Pair)
1x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x LBSK015 - Roof Load Bar Pair 1345mm(W)
1x WDLB001 - Load Bar Wind Deflector / 10mm
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 9.72kg (21.43lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 205mm (8")
Length: 600mm (24")
Height: 75mm (3")
Shipping Weight:
Weight: 8.33kg (18lbs)

Front Runner
FRONT RUNNER SUZUKI JIMNY (2018-CURRENT) LADDER -LASJ004
$222.00
$247.00
Everybody wants to get the much-liked shot of someone standing on the roof or rack when in a fantastic setting, but how do you get up there? With Front Runner's 4-step ladder, of course. It has rubber grips on both the top and bottom steps and has been powder-coated black for an attractive finish. Accessing your camping or adventure gear on your rack has never been easier.
This ladder bolts to the rear swing door and existing points of a Suzuki Jimny (2018-Current).
Suitable for the 3 door and 5 door models.
The ladder has 4 steps.
Rubbers grips on the top and bottom steps.
Length from bottom step to top step is 950mm / 37.4".
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Suzuki Jimny Ladder
Installation Hardware
Fitment Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
490mm (19.3") L x 135mm (5.3") W x 950mm (37.4") H
Weight:
3.15kg (6.9lbs)
Load Rating:
110kg (242.5lbs)

Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2015-2020) SLIMSPORT RACK WIND FAIRING -RRAC240
$1,353.00
$1,503.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Suzuki Jimny. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ002T - Suzuki Jimny (1998-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASJ002 - Suzuki Jimny Foot Rails - by Front Runner
1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.3lbs)

Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2015-2020) SLIMSPORT RACK 40IN LIGHT BAR WIND FAIRING -RRAC239
$1,843.00
$2,048.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Suzuki Grand Vitara (2007-2014) contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSV001T - Suzuki Grand Vitara (2007-2014) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
1 x TRSV001 - Suzuki Vitara Tracks / 1850mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 29kg (63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 33.3kg (73.3lbs)

Front Runner
Front Runner Stratchit Shorties -STRA037
$43.00
$48.00
Cinch down loads simply and effectively so you don't have to worry about gear rattling loose on bumpy roads.
Stratchit Shorties absorb tension like a stretchy ratchet strap.
Stratchit Shorties are adjustable from 470mm / 18.5" in length to 1017mm / 40" in length.
Quick and efficient. Simply secure the ends and hand tighten the strap.
Fastens to, and around, just about anything.
Perfect for Front Runner Racks and accessories, but work with all roof rack systems.
Many uses! Secure: Wolf Pack Pro, Cub Pack and other cases (Pelican, Zargas, Alu-box, etc.) to any roof rack.
Secure: Surfboards, SUP, bicycles, firewood, chairs, etc.
For extra length Stratchits can be used.
Keep your luggage secure inside the vehicle. Scrunch up your sleeping bags extra tight.
Sold in pairs.
HOW TO USE:
Hook to the Front Runner Roof Rack Tie Down Ring or loop around the slats or side profiles and fasten the Stratchit Shortie to itself.
You can even remove the carabiner and loop the Stratchit Shortie through itself - to fasten around any roof rack rail, railing, pole, bumper, tire carrier.... etc.
WARNINGS:
Please read and follow all these warnings carefully -- failure to do so could result in cargo damage and could cause injury.
Do not over tighten. Use only hand leverage.
Never stand in the direct path of the Stratchit Shortie when tensioning to prevent the risk of injury should the strap become detached.
Loads settle. Check Stratchit Shortie after first 10 miles of driving and each 50 miles thereafter.
User to evaluate working load and requirements. DO NOT use to support human weight under any circumstance.
Check the Stratchit Shortie regularly for signs of deterioration or damage.
To ensure longevity, please remove the Stratchit Shorties from the sun and weather elements when not in use.
Make sure that the points of attachment to the vehicle or trailer are of sufficient strength to withstand the maximum loading that will be produced during use.
Take additional care if securing large objects that may be subject to aerodynamic lifting forces caused by bumps. Always use the appropriate number of straps and drive at reduced speeds to minimize the effects of these forces.
Features
Consists of:
2 x Stratchit Shorties
Materials used:
Polyester webbing
Latex Bungee
7mm Stainless Steel Carabiner
Product Dimensions:
Adjustable from 470mm (18.5") L to 1017mm (40) L x 25mm (1.0") W
Weight:
185g (6.5oz) each
370g (13 oz) per pair
Working Load Rating:
220 lbs (100kg)

Front Runner
Front Runner Strap Ratchet 25 X 2.5M W/ Hooks -STRA014
$26.00
$29.00
Strap Ratchet 25 X 2.5M W/ Hooks

Front Runner
Front Runner Storage Box Foam Dividers -SBOX052
$57.00
$63.00
These Storage Box Foam Dividers are designed to partition and protect your valuables on any adventure.
Designed to be compatible with the Front Runner Wolf Pack Pro or the Cub Pack.
Includes three (3) foam strips so you can create your own configurations.
Includes a craft utility knife and a set of 10 clips.
Features
Consists of:
3 x Foam Dividers
1 x Craft Utility Knife
1 x Set of 10 Plastic Clips
Fitting Instructions
Materials used:
Grey Foam
Plastic
Product Dimensions:
950mm (37.4") L x 178mm (7") W x 12mm (0.5") H (Single Foam Divider)
Weight:
0.57kg (1.3lbs)

Front Runner
Front Runner Starlink Antenna Rack Mount -RRAC300
$62.00
$69.00
Easily mount your Starlink Flat High Performance system onto your Front Runner Roof Rack by using the strong, steel Starlink Antenna Rack Mount. You can now uninterruptedly use the Starlink service without having to adjust the angle or focus.
A bracket set to install the Starlink Flat High Performance on all Front Runner roof racks.
Allows uninterrupted use of your Starlink Flat HP service while in motion without the need to adjust angle or focus.
Brackets are angled to allow for water shed.
Made of high strength steel and finishined in the same durable black powder-coating as the Front Runner racks.
Instalation hardware and fitment guide included.
NOTE: The screws to secure dish to the brackets are not included, we recommend to use the original screws supplied with your Starlink.
Consists of:2 x Mounting Bracket (1 Left hand & 1 Right hand) Installation HardewareFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:453mm (17.8") L x 97mm (3.8") W x 86mm (3.4") H
Weight:1.27Kg (1.3lbs)

Front Runner
Front Runner Stainless Steel Tie Down Rings -RRAC025
$22.00
$24.00
These easy to use tie down rings quickly and easily mount to the t-slots on the top, sides and/or the bottom of Front Runner Racks. Sold in Pairs.
No tools required. Just hand tighten.
Slide these around anywhere on the rack for an endless supply of tie down points.
Perfect for use with the Front Runner Stratchit or any style tie down strap.
Mount unusual loads securely to your Rack for hassle free/rattle free travels where a specific mounting accessory is not available.
Of all the accessories for Front Runner Racks, this is THE must have.
Features
Material used:
Stainless steel
Consists of:
2x Ring nuts
2x Bolts
2x Plastic washers
Weight:
0.12kg (0.26lbs)

Front Runner
Front Runner Stainless Steel Collapsible Cup Holder -VACC002
$20.00
$22.00
A fold away cup holder, mountable to any flat surface.
Made of stainless steel.
Pre-cut holes for mounting purposes.
Folds out to support bottom and circumference of the cup, bottle or can.
Holder can accomodate items with a maximum diameter of 58.5mm (2.3").
Features
Consists of:
1x Cup holder
6x Pop rivets
Materials used:
Stainless steel
Weight:
0.1kg (0.2lbs)
Holder slot dimension:
Diameter: 58.5mm (2.3")

Front Runner
Front Runner Spare Wheel Step -LADD007
$180.00
$200.00
Convenient means of reaching your roof rack.
Attaches to rear mounted spare wheel using heavy duty black ratchet strap provided.
Allows effortless access to Roof Racks.
Black powder coated high strength steel frame with non-slip tread plates.
Fits wheel sizes from 24" to 35". No drilling, no tools -- just wrap, ratchet tight, and step up.
Can be used to secure the Spare Tire Mount Braai/BBQ Grate to your vehicles spare wheel.
Features
Consists of:
Ladder, top step and bottom step
5m (196.85) endless ratchet strap
Materials used:
Black powder-coated 3mm (0.11") high strength steel
Product Dimensions:
L 450mm (17.71") x W 150mm (5.9") x H 110mm (4.33")
Length of strap: 5m (196.85)
Weight:
3kg (6.6lbs)
Note:
Fits all wheel types between 24"and 35"

Front Runner
Front Runner Spare Wheel Inflator -REQU059
$63.00
$70.00
Using your compressor, this nifty hose device will inflate your spare tyre when you've sprung a leak on one of your fitted tyres.
Product Dimensions (mm):250L x 250W x 30H
Weight:0.11kgSpecial Notes
SKU; RR-AC-04

Front Runner
Front Runner Spare Tire Mount Braai/BBQ Grate Leg Replacement Kit -VACC031
$45.00
$50.00
This kit Includes all the necessary hardware and assembly instructions.
Features
Consists of:
1 x Aluminum Braai/BBQ Grate Leg
1 x Aluminum Braai/BBQ Grate Leg Spacer
Installation Hardware
Materials used:
Ultra Hi Temperature Coated Aluminum
Steel - Fasteners
Product Dimensions:
363mm (14.3") L x 12mm (0.5") W x 215mm (8.5") H
Weight:
280g (9.9oz)

Front Runner
Front Runner Spare Tire Mount Braai/BBQ Grate -VACC023
$328.00
$365.00
This ingenious, stainless steel cooking grate, stores over your spare wheel and takes up virtually no space.
Laser cut steel grill on aluminum legs.
Grill and griddle sections for campfire cooking options.
Hooks over a spare wheel (secure with Spare Wheel Step, Strap Ratchet 4M Endless or wheel cover - not included).
Fits 29 to 37 tyres (740mm to 890mm).
Please Note: This Spare Tire Mount Braai/BBQ Grate is designed to be used for cooking purposes over coals and not used over high flames.
Features
Material used:
Grill: Laser-cut steel
Legs and spacers: Die Cast Aluminium
Product Dimensions:
Overall Set-up Dimensions:
210mm (8.5") H x 790mm (31.1") to 950mm (37.4") in Diameter
Grill top Diameter / Cooking Surface:
600mm (23.6") Diameter
Fits:
29" to 37" tyres
Weight:
4.5kg (9.9lbs)

Front Runner
Front Runner Spare Bolt Kit For Slimline II Tray -RRAC041
$70.00
$78.00
Replacement nuts and bolts for lost or damaged Slimline II components.
Features
Consists of:
32x M8 nyloc nuts
4x M6x16 dome head bolts
28x M8x25 dome head bolts
4x M8x45 dome head bolts
2x Aluminium rack joiners (thin)
2x Aluminium rack joiners (thick)

Front Runner
Front Runner Spade/Shovel with Axe Edge -REQU049
$51.00
$57.00
Spade/Shovel with Axe Edge
Product Dimensions:L 760MM x W 210MM x H 60MM
Weight:1.5kGSpecial Notes SKU; FG00556

Front Runner
Front Runner Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner -RRAC182
$42.00
$47.00
A pair of brackets that secure to the slats of your Front Runner Slimsport or Slimpro Van Rack.
Mounts Front Runner side mount accessories such as:
Quick Release Awning Mount Kit
Ratcheting Spade/Shovel & Paddle Mount
Installs in the T-slots of the Slimsport or Slimpro Van Rack and can be inversed to allow for standard or lower mount depending on roof clearance.
Made from black powder coated 6063 T6 aluminum to match your rack accessories.
Supplied with installation hardware and fitting instructions.
Note: This product is only compatible with the Front Runner Slimsport and Slimpro Van Rack Kits.
Features
Consists of:
1 x Pair of Rack Accessory Mounting Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminum
Product Dimensions:
101mm (4") L x 60mm (2.4") W x 50mm (2") H (Per Single Bracket)
Weight:
0.37kg (0.8lbs)

Front Runner
Front Runner Slimsport/Slimpro Van Side Mount Accessory Bracket / Large -RRAC283
$89.00
$99.00
This pair of brackets secures to the slats of your rack to accommodate most Front Runner side mount accessories.
The brackets are adjustable and can be set at any position along the T-slot of the rack slats.
Made from high strength steel and sealed with the same durable, weather resistant black powder-coating as the Front Runner Roof Racks.
Includes installation hardware and fitting instructions.
No drilling is required to attach side accessories.
Features
Consists of:
1 x Side Mount Accessory Bracket
1 x Hardware Kit
1 x Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
222mm (8.7") L x 50mm (2") W x 99mm (3.9") H
Weight:
0.7 kg (1.5lbs)

Front Runner
Front Runner Slimpro Van Rack Expedition Rails / 4533mm (L) -KVXS011
$481.00
$534.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 4533mm / 178.5".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
16x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
12x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
4131mm (162.6") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
8.26kg (18.2lbs)

Front Runner
Front Runner Slimpro Van Rack Expedition Rails / 3927mm (L) to 4129mm (L) -KVXS010
$419.00
$466.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3927mm / 154.6" to 4129mm / 162.6".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
12x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
10x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3782mm (148.9") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
6.59kg (l14.5bs)

Front Runner
Front Runner Slimpro Van Rack Expedition Rails / 3579mm (L) -KVXS009
$334.00
$371.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3579mm / 140.9".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3206mm (126.22") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.64kg (12.4lbs)

Front Runner
Front Runner Slimpro Van Rack Expedition Rails / 2973mm (L) -KVXS008
$328.00
$364.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2973mm / 117".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
10x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
8x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2649mm (104.3") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.05kg (11.1lbs)

Front Runner
Front Runner Slimpro Van Rack Expedition Rails / 2569mm (L) -KVXS007
$284.00
$315.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2569mm / 101.1".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2417mm (95.2") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
4.58kg (10.1lbs)

Front Runner
Front Runner Slimpro Van Rack Expedition Rails / 2367mm (L) -KVXS006
$276.00
$307.00
Upgrade your Front Runner Slimpro Van Roof Rack by adding expedition-style side rails. This side rail kit allows the front and back of the rack to remain open for loading larger items such as kayaks, paddleboards and surfboards. It features the same durable, weather-resistant powder-coated finish as the Slimpro Van Roof Rack and adds extra cargo support without adding too much weight or additional wind resistance.
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2367mm / 93.2".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-jointsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2245mm (88.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)
Weight:4.34kg (9.6lbs)

Front Runner
Front Runner Slimpro Van Rack Adjustable Wind Fairing -RRAC329
$174.00
$193.00
Give your van or ride that sought-after rugged and capable look with this width adjustable Wind Fairing. The fairing is also the perfect place to mount a lightbar or spotlights for nighttime adventures.
A Wind Fairing for Slimpro Van Racks.
Secures suitable 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount*, 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount*, Light Pods or Spotlights to your Slimpro Van Racks.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
Provides better airflow by moving air up and over the rack and accessories, reducing drag and wind noise.
Note: Lightbars*, Light Pods and Spotlights are sold separately. 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount requires a minimum rack width of 1345mm.
Consists of:1x Slimpro Van Rack Adjustable Wind Fairing Installation HardwareFitting InstructionsMaterials used:Black powder-coated high strength steelProduct Dimensions:Closed Dimensions:173mm (6.8") L x 1350mm (53.1") W x 115mm (4.5") HOpen Dimensions:173mm (6.8") L x 1568mm (61.7") W x 115mm (4.5") HWeight:3.22kg (7.1lbs)

Front Runner
Front Runner Slimpro Canopy Rack Kit / 1335mm(W) x 970mm(L) -KVCA005T
$708.00
$787.00
The Slimpro Canopy Rack Kit creates those all-important gear storage possibilities on the top of your canopy. The customisable slat configurations allow you to easily carry day-to-day tradesman gear with a quick change to your weekend adventure gear. This Kit is compatible with most Front Runner accessories, and together, they will massively increase external gear-carrying capabilities.
Compatible with a canopy length of 970mm / 38.2" or longer.
Load-carrying area: 1256mm (49.44") x 1175mm (46.25").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T1x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 10.31kg (22.73lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 13kg (29lbs)

Front Runner
Front Runner Slimpro Canopy Rack Kit / 1335mm(W) x 1772mm(L) -KVCA001T
$1,100.00
$1,222.00
Unlock essential gear storage opportunities on your canopy with the versatile Slimpro Canopy Rack Kit. The adaptable slat configurations and many Front Runner Rack accessories allow smooth transitions from weekday tradesman essentials to your weekend exploration gear. This Canopy Kit and the rack accessories are the best way to improve external gear carrying on your canopy.
Compatible with a canopy length of 1772mm / 69.76" or longer.
Load-carrying area: 1256mm (49.44") x 1762mm (69.37").
Eight (8) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
4x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps4x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT004 - Van Rack Side Profile / 1762mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 26.25kg (57.87lbs)Shipping Dimensions:Width: 445mm (18")Length: 1770mm (70")Height: 200mm (8")Shipping Weight:Weight: 32kg (70lbs)

Front Runner
Front Runner Slimpro Canopy Rack Kit / 1335mm(W) x 1570mm(L) -KVCA002T
$1,064.00
$1,182.00
The versatile Slimpro Canopy Rack Kit transforms the top of your canopy for unlimited external gear-carrying options. Thanks to the adaptable slat configurations and many Front Runner Rack accessories, you can easily switch from weekday work gear to weekend adventure gear.
Compatible with a canopy length of 1570mm / 61.81" or longer.
Load-carrying area: 1256mm (49.44") x 1560mm (61.41").
Eight (8) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:4x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps4x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT003 - Van Rack Side Profile / 1560mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 16.82kg (37.08lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 26kg (57lbs)

Front Runner
Front Runner Slimpro Canopy Rack Kit / 1335mm(W) x 1470mm(L) -KVCA003T
$1,028.00
$1,142.00
Fit the lightweight Slimpro Canopy Rack Kit so your canopy can tackle those tough cargo-carrying tasks. Thanks to the wide range of smart rack accessories, you can easily switch your set-up to suit work, sports, or camping needs. This Kit is the smart way to maximise your canopy’s cargo-carrying capacity.
Compatible with a canopy length of 1470mm / 57.87" or longer.
Load-carrying area: 1256mm (49.44") x 1358mm (53.46").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 15.33kg (33.8lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 20kg (44lbs)

Front Runner
Front Runner Slimpro Canopy Rack Kit / 1335mm(W) x 1170mm(L) -KVCA004T
$992.00
$1,102.00
Maximize your canopy's cargo capacity with the highly versatile Slimpro Canopy Rack Kit and the wide variety of available accessories for the load area. This smart Kit will ensure that you can easily switch between your work, sports, and adventure gear. There is no better way to carry cargo on your canopy.
Compatible with a canopy length of 1170mm / 46.06" or longer.
Load-carrying area: 1256mm (49.44") x 1160.8mm (45.70").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 14.73kg (32.47lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 19kg (42lbs)

Front Runner
Front Runner Slimline II Universal Accessory Side Mounting Brackets -RRAC031
$51.00
$57.00
Universal brackets that fit onto the Front Runner Slimline II Roof Rack's side profile, allowing you to mount accessories to your roof rack without having to drill into it.
Features
Consists of:
Comes in a set of (3) three brackets with pre-cut mounting holes. Washers, bolts and nuts included.
Materials used:
Black powder coated steel.
Product Dimensions:
L 115mm (4.52") W 90mm (3.54") x H 55mm (2.16")
Weight:
0.66kg (1.455lbs)

Front Runner
Front Runner Slat to Load Bar Conversion end Cap Kit -RRAC044
$25.00
$28.00
Convert any size slat to a load bar with these plastic end caps.
Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat.
Just pop them on and your slat to load bar "conversion" is complete!
Supplied in sets of (4) four.
Features
Consists of:
4x Load Bar End-caps
Material used:
Plastic - Polypropylene
Product Dimensions:
91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H
Weight:
80g (2.8oz)

Front Runner
Front Runner Shower Cubicle Curtain / Caddy -SHOW013
$50.00
$55.00
A privacy curtain and shower caddy to use with the Rack Mount Shower Cubicle.
Easily connects to your Front Runner Rack with two carabiner clips.
The shower caddy has 3 storage compartments.
Stores away inside your Shower Curtain Storage Bag.
Features
Consists of:
1 x Shower Caddy
Installation Hardware
Fitting Instructions
Materials used:
240gsm Ripstop, UV and mold resistant fabric
Product Dimensions:
1000mm (39.4") L x 1200 (47.2") W x 10mm (0.4") D (When hang on vehicle)
Weight:
0.61kg (1.4lbs)

Front Runner
Front Runner Shoe Bag for Roof Top Tent -TENT085
$31.00
$34.00
A 7 (seven) step replacement ladder for your Roof Top Tent incase the original ladder gets damaged or lost.
Retractable, for easy storage.
Made from sturdy aluminium.
Foot friendly steps.
Weight limit: 180kg/400Lbs.
NOTE: Should the tent install height be higher than 2 meters you will need a Tent Extension Ladder.
Features
Materials used:
Extruded aluminium
Stainless steel
Nylon-6
Product Dimensions:
1150mm (45.3") L x 350mm (13.8") W x 90mm (3.5") H
Open Dimensions:
2055mm (80.9") L x 350mm (13.8") W x 90mm (3.5") H

Front Runner
Front Runner Sand Trax Mat -REQU042
$78.00
$87.00
A Sand Trax mat to help with off-road hindrances like sand, mud or sharp rocks.
Consists of:1 x Sand Trax MatMaterials used:Rubber stripsSteel cableProduct Dimensions:1500mm (59.1") L x 220mm W (8.7")Weight:7.64kg (16.8lbs)Special NotesSKU;RTSANDTRAX