This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Kia Sorento 2016+. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRKS002T - Kia Sorento (2016-2020) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAKS002 - Kia Sorento (2016-Current) Foot Rails - by Front Runner 1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 32kg (71lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 37.3kg (82.0lbs)

This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for your Lada Niva 4x4 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLN001T - Lada Niva 4x4 Slimline II Roof Rack Kit - by Front Runner Consisting of: 3x LASS103 - No 3 Leg 155mm (Pair)1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 28.43kg (62.68lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 26.96kg (59lbs)

This drawer kit has 2 lockable drawers, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions. 113kg / 250 lb per drawer load carrying capacity. High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base. This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicles existing mounting points and the drawer mounting brackets. Removing the drawers is just as easy. Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear. The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides. Faceplates have 6 pre cut knock-outs for adding monitoring or electrical panel socket inserts. The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc. To create a removable box option, just insert 2 Cub Pack. Designed to fit inside Front Runner drawers, the Cub Pack can be used to further organize and move gear in and out of a vehicle. To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer. The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicles interior contours. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. All Front Runner Storage Systems are backed by a 2 year warranty. The LAND ROVER ALL-NEW DISCOVERY DRAWER KIT allows access to the spare wheel winder through an access "port" in the top deck. There is no need to remove the drawers to lower the spare. *Please Note: Cub Pack and Drawer Dividers are not included when purchasing this Drawer System and are sold separately. Features Consists of: 1 x Front Runner Drawer unit (SSDR002) 1 x Land Rover All-New Discovery Deck Completion Set 2 x Push to Close latch with 2 keys per lock 3 x Accessory Channels 6 x Eye Nuts for Accessory Channel 1 x T Wrench with 1 custom sockets for wheel winder Installation Hardware including 4 turnbuckles to secure unit to vehicle Fitting Instruction Materials used: Aluminum - Accessory Channels & Sub Frame Black powder coated steel - Drawer Bins & Frame Carpet & Laminated plywood - Top Deck & Deck Set Product Dimensions: Overall Dimensions: 974mm (38.3") L x 1324mm (52.1") W x 330mm (13") H Interior Drawer Dimensions: Left Hand Drawer: 914mm (36") L x 461mm (18.2") W x 208mm (8.2") H Right Hand Drawer: 914mm (36") L x 373mm (14.7") W x 208mm (8.2") H Weight: 82.4kg (181.7lbs) Load Rating: 113Kg (250lbs) per Drawer Special Notes: Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.

This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment. This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 1 x FALD007 - Land Rover All-New Discovery Foot Rails - by Front Runner1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight: 27kg (60lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18")Length 1615mm (64")Height 250mm (10") Shipping Weight: Weight 31.9kg (70.1lbs)

This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLDT01L - Land Rover Defender (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 3x LASS108 - No 8 Leg 250mm (Pair) 1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 31.48kg (69.4lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 140mm (6") Shipping Weight: Weight: 31.48kg (69lbs)

This 2166mm/85.3" long, 3/4 size, Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLD035T - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit - by Front Runner Consisting of: 4x LASS107 - No 7 Leg 225mm (Pair) 1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L) 1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 42.74kg (94.23lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 280mm (11") Shipping Weight: Weight: 43.4kg (95lbs)

This 2166mm/85.3" 3/4 size Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLD030L - Land Rover Defender 110 (1983-2016) Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner Consisting of: 4x LASS108 - No 8 Leg 250mm (Pair)1x RRSTJ11 - SLII Tray - 1425mm(W)X2166mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 34.1kg (75.18lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 40.48kg (89lbs)

This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLD003L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit - by Front Runner Consisting of: 4 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner 1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 42kg (92lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 48.8kg (107.3lbs)

This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.   All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLDT03L - Land Rover Defender 110 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner 1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 42kg (93lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 49.0kg (107.8lbs)

This 1762mm/69.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 110 L663. Easily installs using the existing factory rails. No drilling is required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables. An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLD042T - Land Rover Defender 110 L663 (2020-Current) Slimline II Roof Rack Contour Kit Consisting of: 1x FALD012 - Land Rover Defender L663 (2020-Cur) Contour Rail 1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 32.41kg (71.45lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1720mm (68") Height: 275mm (11") Shipping Weight: Weight: 32kg (70lbs)

This 1560mm/61.4" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110/130 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLD005L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 3 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner 1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 31kg (68lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 35.8kg (78.8lbs)

This 1560mm/61.4" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender 110/130 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLDT05L - Land Rover Defender 110/130 (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 3 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner 1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 29kg (64lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight: 33.8kg (74.3lbs)

This kit creates a full-size rack that sits above your Land Rover Defender 130's truck bed. This Slimline II rack kit contains the Slimline II tray (1575mm x 1358mm), two (2) tracks, and six (6) pickup truck bed universal legs that fit into the tracks. All Front Runner rack kits contain installation instructions as well as all the components needed to mount the Slimline II tray to your vehicle. All Front Runner racks are backed by a limited lifetime warranty* Drilling is required to mount the track to the bed of your truck. Features KRLD041T - Land Rover Defender 130 (1983-2016) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS030 - Universal Load Bed Leg / Medium (Pair) 1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L) 1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 32.6kg (71.87lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 265mm (10") Shipping Weight: Weight: 34kg (75lbs)

Get your extremely capable Land Rover Defender 130 ready for heavy gear-carrying duties with the modular Slimline II Roof Rack Kit. With over 55 accessories available for this tough rack, you can confidently tackle any adventure with the right gear. This 2368mm/93.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Defender 130. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The OEM Tracks need to be removed when fitting this Rack Kit. Vehicles with the panoramic sunroof, only the rear, large table can be fitted. If you fit the front table you will not be able to open the sunroof. Features KRLD043T - Land Rover Defender 130 Slimline II Roof Rack Kit Consisting of: 1x FALD013 - Land Rover Defender 130 (2022-Curr) Foot Rails 1x RRSTD12 - SLII Tray - 1255mm(W)X2368mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 41.87kg (92.31lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 280mm (11") Shipping Weight: Weight: 45kg (99lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 90 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLD007L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit - by Front Runner Consisting of: 4x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 39.8kg (87.74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1615mm (64"); Height: 140mm (6")   Shipping Weight: Weight: 38.28kg (84lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender 90 contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLDT07L - Land Rover Defender 90 (1983-2016) Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 4 x LASS108 - No 8 Leg 250mm (Pair) - by Front Runner 1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 35kg (78lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 41.0kg (90.2lbs)

This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Contour Rails to mount the Slimline II Tray to your Land Rover Defender 90. Easily installs using the existing factory rails. No drilling is required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific contour rails have openings for storing compatible gear under the rack such as Front Runner tables. An opening on the Contour Rails allows access to Front Runner under rack mount table (Pro Stainless Steel Prep Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This kit only allows your sunroof to operate in tilt/vent mode if an under rack table is fitted. Vehicles that are equipped with fabric roofs are not able to be opened if an under rack table is fitted. Features KRLD040T - Land Rover Defender 90 (2020-Current) Slimline II Consisting of: 1x FALD011 - Land Rover Defender 90 (2020-Curr) Foot Rails/Mini 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 26kg (57.33lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 160mm (6") Shipping Weight: Weight: 23kg (51lbs)

A spare wheel carrier that mounts onto your Land Rover Defender 90 & 110 Station Wagon and keeps that spare wheel safe and secure.

This 1964mm/77.3" long, full size Slimline II cargo carrying roof rack kit for the Land Rover Discovery series 1 & 2 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLDT12L - Land Rover Discovery 1/2 Slimline II Roof Rack Kit - by Front Runner Consisting of: 3 x LASS110 - No 10 Leg 280mm (Pair) - by Front Runner 1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 33kg (73lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 38.4kg (84.5lbs)

This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Discovery 2 contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLDT10L - Land Rover Discovery 2 Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 2 x LASS110 - No 10 Leg 280mm (Pair) - by Front Runner 1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 25kg (55lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 29.3kg (64.4lbs)

This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Discovery 2 contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLDT10L - Land Rover Discovery 2 Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 2 x LASS110 - No 10 Leg 280mm (Pair) - by Front Runner 1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 25kg (55lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 29.3kg (64.4lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Discovery 2 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLD012L - Land Rover Discovery 2 Slimline II Roof Rack Kit - by Front Runner Consisting of: 3 x LASS109 - No 9 Leg 265mm (Pair) - by Front Runner 1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 33kg (72lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 38.3kg (84.2lbs)

This drawer kit has 2 lockable drawers, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions. 113kg / 250 lb per drawer load carrying capacity. High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base. Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear. The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides. The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc. To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle. To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer. The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicles interior contours. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicles existing mounting points and the drawer mounting brackets. Removing the drawers is just as easy. The LAND ROVER DISCOVERY LR3 AND LR4 DRAWER KIT allows access to the spare wheel winder through an access "port" in the top deck. There is no need to remove the drawers to lower the spare. All Front Runner Storage Systems are backed by a 2 year warranty. *Please Note: Cub Packs, Flat Packs and Drawer Dividers are not included when purchasing this Drawer System and are sold separately. Features Consists of: 1 x Front Runner Drawer unit (SSDR002) 1 x Land Rover Discovery LR3 & LR4 Drawer Deck Completion Set 2 x Push to Close latch with 2 keys per lock 3 x Accessory Channels 6 x Eye Nuts for Accessory Channel 1 x T Wrench with 2 custom sockets for wheel winder Installation Hardware including 4 turnbuckles to secure unit to vehicle Fitting Instruction Materials used: Aluminum - Accessory Channels & Sub Frame Black powder coated steel - Drawer Bins & Frame Carpet & Laminated plywood - Top Deck & Deck Set Product Dimensions: Closed: 972mm (38.3") L x 1230mm (48.4") W x 328mm (12.9") H Open: 1896mm (74.7") L x 1230mm (48.4") W x 328mm (12.9") H Interior Drawer Dimensions: Left Hand Drawer: 914mm (36") L x 461mm (18.2") W x 208mm (8.2") H Right Hand Drawer: 914mm (36") L x 373mm (14.7") W x 208mm (8.2") H Weight: 80.3Kg (177lbs) Load Rating: 113Kg (250lbs) per Drawer Special Notes: Supplied with a T-wrench and 2 custom sockets for operating the wheel winder through the drawer system.

This 1560mm/61.4" 3/4 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Discovery LR3/LR4. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). If your vehicle has a DAB antenna, the table can be inserted from either the right hand side or the left hand side of the roof rack to steer clear of the DAB antenna. If your vehicle does not have a DAB antenna, you may also orientate the table to mount from the rear of the roof rack. **Please note. This Rack kit is not compatible with the Land Rover factory OEM Ladder. Consider purchasing the Front Runner Ladder for Land Rover Disco 3,4 / LR3, LR4 instead. (Part #LALD004). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLD029T - Land Rover Discovery LR3/LR4 Slimline II 3/4 Roof Rack Kit - by Front Runner Consisting of: 1 x FALD004 - Land Rover Discovery LR3 & LR4 1/2 Rack Foot Rails - by Front Runner 1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 28kg (62lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 32.7kg (72.0lbs)

This 2166mm/85.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Discovery LR3/LR4. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. If your vehicle has a DAB antenna, the tables can be inserted from either the right hand side or the left hand side of the roof rack to steer clear of the DAB antenna. If your vehicle does not have a DAB antenna, you may also orientate one table to mount from the rear of the roof rack. **Please note. This Rack kit is not compatible with the Land Rover factory OEM Ladder. Consider purchasing the Front Runner Ladder for Land Rover Disco 3,4 / LR3, LR4 instead. (Part #LALD004). These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLD028T - Land Rover Discovery LR3/LR4 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FALD003 - Land Rover Discovery LR3 + LR4 Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 39.97kg (88.12lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 41.63kg (92lbs)

Front Runner offers sump guards specifically designed for the make and model of each vehicle. The fact that each model has it's own specific design means that the correct parts of the vehicle are protected from damage. This Front Runner Sump Guard is formed out of high strength steel and is black powder-coated for added resistance to the elements. This sump guard mounts to existing mounting points which means that no drilling or modification to the vehicle is necessary for fitment, furthermore, there are cut outs around integral areas and do not hinder the functionality of the vehicle's factory fitted parts, such as the Discovery's recovery point. **IMPORTANT NOTE: Not suitable for the 2013 LR4/Discovery 4 pre "Face-lift" version. Features Consists of: 1 x Sump Guard Plate 2 x Aluminium Spacers Installation hardware Materials used: Black powder-coated 4.5mm high strength stainless steel Aluminium Product Dimensions: 950mm (37.4") W x 548mm (21.6") L x 140mm (5.5") H Weight: 16.2kg (35.7lbs)

This 1762mm/69.4 long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to the Land Rover Discovery Sport. It easily installs using the existing factory mounting points. No drilling required.*Note: Does not fit models without a Panoramic Roof and without Roof Rail Preparation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). Please Note: This kit requires Roof Rail Preparation / Factory Roof Rails. Included cover plates are for Panoramic glass roof fitment only. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLD031T - Land Rover Discovery Slimline II Roof Rack Kit Consisting of: 1 x FALD006 - Land Rover Discovery Sport Foot Rails 1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 32kg (70lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 37.2kg (81.9lbs)

This 1560mm/61.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Freelander 2 (L359) (2007-2014). Easily installs using the existing factory mounting points. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. An opening on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLF002T - Land Rover Freelander (0614) Slimline II Roof Rack Kit Consisting of: 1x FALF002 - Land Rover Freelander 2 (L359) (2007-2014) Foot Rails 1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 29.85kg (65.81lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1730mm (68") Height: 315mm (12") Shipping Weight: Weight: 31kg (68lbs)

This 2166mm/85.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your New Defender 110. Easy fitment using OEM mounting points. The OEM Tracks need to be removed when fitting this Foot Rails Kit. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: The Land Rover OEM ladder & OEM storage box is not suited with rack fitment. Not suitable for folding fabric roof. Note: The sunroof can not be used when the Wind Fairing for Rack / 1165mm/1255mm(W) is fitted. Features KRLD034T - Land Rover New Defender(2020-Current) 110 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FALD008 - Land Rover Defender L663 (2020-Curr) Foot Rails 1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 43.97kg (96.94lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 245mm (10") Shipping Weight: Weight: 42kg (92lbs)

Mounts to the existing tie-down points in the bed of the Land Rover 110 (L663). Drilling is not required for installation. Secure up a fridge up to 52L in size, with room to spare for various camping items, or Front Runners storage solutions, such as the Wolf Pack Pro or Cub Pack. Dual-latching lock securely keeps the unit closed and prevents rattling during travel. Features multiple tie-down points for Stratchits or other types of storage straps. Load rating: 113 kg/250 lbs. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. Note: This Cargo Slide cannot be installed together with a Drop Down Tailgate Table. Features Consists of: 1 x Cargo Slide 1 x Cargo Slide Mount Installation Hardware Fitting Instruction Materials used: Black powder coated steel Product Dimensions: 851mm (33.5") L x 1087mm (42.8") W x 170mm (6.7") H Internal Drawer Dimensions: 778mm (30.6") L x 780mm (30.7") W x 60mm (2.4") H Weight: 39.19kg (86.4lbs) Load Rating: 113kg (250lbs)

This 1762mm/69.4"long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your 2020-Current Land Rover New Defender 90. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. Openings on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a limited lifetime warranty.* Note: This kits is not compatible with OEM ladder or storage box. The OEM tracks need to be removed when installing these Foot Rails. This Rack Kit is not suited for the New Defender V8 models. Features KRLD039T - Land Rover New Defender 90 (2020-Current) Slimline II Consisting of: 1x FALD010 - Land Rover Defender 90 (2020-Current) Foot Rails 1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 37.28kg (82.19lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 255mm (10") Shipping Weight: Weight: 38kg (84lbs)

This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the Land Rover New Defender contains 1 Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation. This Rack Kit has a side opening to allow fitment of the Pro Stainless Steel Prep Table Kit. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This Rack Kit is not suited for the New Defender V8 models and models with a folding fabric roof. Features KRLD037T - Land Rover New Defender(2020-Current) 110 w/OEM Tracks Slimline II Roof Rack Kit - by Front Runner Consisting of: 3x FASS017 - Foot Set / 75mm-85mm3x RRAC930 - Land Rover New Defender (L663) OEM Track Mount Kit1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 27.51kg (60.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 150mm (6")   Shipping Weight: Weight: 27.6kg (61lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Rover Range Rover (1970-1996) contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This rack kit does not fit vehicles with the additional Sun Roof / Glass Roof. Features KRRR002L - Land Rover Range Rover (1970-1996) Slimline II Roof Rack Kit Consisting of: 2x LASS027 - Leg Spacer 6mm (Pair) 1x LASS102 - No 2 Leg 130mm (Pair) 2x LASS103 - No 3 Leg 155mm (Pair) 1x RRSTM10 - SLII Tray - 1475mm(W)X1964mm(L) 1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 38.16kg (84.13lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 140mm (6") Shipping Weight: Weight: 37.06kg (82lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for Range Rover (1970-1996) contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRRRT02L - Land Rover Range Rover (1970-1996) Slimline II Roof Rack Kit / Tall Consisting of: 1x LASS027 - Leg Spacer 6mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x LASS103 - No 3 Leg 155mm (Pair)1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 41.25kg (90.94lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 37.34kg (82lbs)

This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Land Rover Range Rover Evoque. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRRR006T - Land Rover Range Rover Evoque (2013-2019) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FALE001 - Land Rover Range Rover Evoque Foot Rails - by Front Runner 1 x RRSTD08 - Slimline II Tray - 1255mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 27kg (59lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 31.2kg (68.7lbs)

This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the Land Rover Range Rover Sport L320 contains the Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRRR011T - Land Rover Range Rover Sport L320 (2005-2013) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2x FASS012 - Foot Set / 40mm - 50mm 1x FASS015 - Foot Set Angled / 75mm 1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L) 1x TRAC010 - Universal Track Non Drilled / 1800mm(L) 1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 32.51kg (71.67lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1730mm (68") Height: 270mm (11") Shipping Weight: Weight: 33.4kg (73lbs)

This 1762mm/69.4" long, full-size, Slimline II cargo carrying roof rack kit for the Range Rover Vogue contains the Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Universal fitment, may require custom modifications. Features KRRR010T - Land Rover Range Rover Vogue(L322)Slimline II Roof Rack Kit Consisting of: 3x FASS012 - Foot Set / 40mm - 50mm 1x RRSTG09 - SLII Tray - 1345mm(W)X1762mm(L) 1x TRAC003 - Universal Track / 1800mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 32.93kg (72.6lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 240mm (9") Shipping Weight: Weight: 33.2kg (73lbs)

Compatible with LDV/Maxus Deliver 9 (LWB) (2020-Current) high roof vans with a vehicle length of 5940mm / 233.9". Load-carrying area: 2570mm (101.2") x 1470mm (57.9"). Ten (10) Mounting Feet secure into van's existing factory mounting points. Compatible with most Front Runner side mount accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVLD001T - LDV/Maxus Deliver 9 (LWB/High Roof) (2020-Current) Slimpro Van Rack Kit - by Front Runner Consisting of: 5x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 4x RRNS1425 - Narrow Slat / 1425mm (Pair) 1x SPVT001 - Van Rack Side Profile / 1156mm 1x SPVT002 - Van Rack Side Profile / 1358mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 2570mm (101.2") L x 1470mm (57.9") W x 158mm (6.2") H Approximate Installed Weight: 32kg (70.55lbs) LDV/Maxus Deliver 9 Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 160mm (6") Shipping Weight: Weight: 38kg (84lbs)

Unlock your van's storage potential with this highly versatile, low-profile roof rack kit for the LDV/Maxus G10. For long-distance van life missions, weekend trips, or hauling work equipment such as ladders and pipes, the Slimpro Van Rack can comfortably support large loads. It features an adjustable slat system to accommodate roof-mounted equipment, such as air conditioning units, skylights, and air vents.  Compatible with LDV/Maxus G10 with a vehicle length of 5168mm / 203.5". Load-carrying area: 2368mm (93.2") x 1255mm 49.4"). Six (6) Mounting Feet secure into van's existing factory mounting points. Compatible with most Front Runner side mount accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* Features KVLD002T - LDV Maxus 10 Slimpro Van Rack Kit Consisting of: 2x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm 1x FAVF006 - Volkswagen Crafter Van Rack Foot Set / 90mm 1x RRAC207 - Van Rack Joiner Kit 2x RRAC208 - Van Rack Side Profile End Caps 2x RRAC978 - Toyota HiAce LWB(2019-) SlimPro Rack Spacer 2x RRNS1255 - Narrow Slat / 1255mm (Pair) 2x SPVT001 - Van Rack Side Profile / 1156mm 1x WDST013 - Wind Deflector Van Rack 30mm Lip Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 18.06kg (39.82lbs) Assembled Rack Kit Dimensions: 2370mm (93.3") L x 1340mm (52.7") W x 165mm (6.5") H   Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 160mm (6") Shipping Weight: Weight: 25kg (55lbs)

Upgrade your Lexus GX 460 (2010-Current) for adventure with the sleek and functional Slimsport Roof Rack. Designed to complement your GX's aesthetic perfectly, this low-profile roof rack frees up valuable space inside your vehicle. With over 55 compatible accessories—including everything from bike and surfboard carriers to roof top tents—you can easily customize it to meet your unique needs. This low-profile flat deck Slimsport rack has a load-carrying area of 2080mm (81.9") L x 1188mm (46.8") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket (RRAC182) for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Lexus GX 460 (2010-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack (RRAC213) is required for installation. Note: Drilling required. Note: Under Rack Tables are not compatible with the Slimsport rack kit range Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. All Front Runner Racks are backed by a Limited Lifetime Warranty* Consisting of:1x KSLG002 - Lexus GX 460 / Toyota Prado 150 Slimsport Tray1x RRAC324 - Lexus GX 460 (10-Cur) Slimsport Rack Wind FairingMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2080mm (81.9") L x 1188mm (46.8") W x 137mm (5.4") HApproximate Installed Weight: 35.77kg (78.86lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 230mm (9")Shipping Weight:Weight: 37kg (81lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Lexus GX460. It easily installs using the existing factory mounting points. No drilling is required. All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller (Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLE010T - Lexus GX460 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FATP003 - Toyota Prado 150 Foot Rails1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 39.61kg (87.32lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 255mm (10")   Shipping Weight: Weight: 40kg (88lbs)

This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Lexus GX470. Easily installs using the existing factory mounting points. No drilling required.   All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. These Foot Rails contain 1 openings to access Front Runner under rack mount table (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLE008T - Lexus GX470 Slimline II 1/2 Roof Rack Kit - by Front Runner Consisting of: 1 x FATP002 - Toyota Prado 120 Foot Rails - by Front Runner 1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 27kg (59lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 31.0kg (68.2lbs)

This 1964mm/77.3"long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Lexus GX470. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLE004T - Lexus GX470 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FATP002 - Toyota Prado 120 Foot Rails - by Front Runner 1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 33kg (74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 38.9kg (85.5lbs)

Say goodbye to crawling into the back of your truck every time you need to reach your gear. Removing your tools, gear and boxes becomes easier, quicker and safer with a Front Runner Cargo Slide. Hold open feature prevents the slide from closing when on uneven surfaces. Push to close dual latching lock securely keeps the unit closed and rattle-free. Load Rating: 250kg / 551.2 lbs. Designed for the worlds toughest roads. The flat drawer contains multiple tie down points and two cargo attachment channels for securing gear with Stratchits or other style straps. High strength, sealed bearings allows the tray to extend nearly 100% from the anchored base. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. Mounts to flat surfaces. Depending on application, drilling into the vehicle may be required. Designed for interior use only with a canopy, camper shell, or other style load bed cover. All Front Runner Storage Systems are backed by a 2 year warranty. Note: This cargo slide will only fit certain sized pickup truck load beds and vehicle cargo holds. Please see SPECS for exact product measurements and to determine if this product is the right fit. All vehicles with optional bed liners must check internal measurements. If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase. Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8. Features Consists of: 1 x Cargo Drawer unit 2 x Accessory channels Installation Hardware Materials used: Black powder coated steel Laminated plywood Carpet Product Dimensions: 1514mm (59.6") L x 1199mm (47.2") W x 112mm (4.4") H Width needed between load bed wheel arches: 1095mm (43.1") Weight: 56.4kg (124.3lbs) Load Rating: 250kg (551.2lbs)

Say goodbye to crawling into the back of your truck every time you need to reach your gear. Removing your tools, gear and boxes becomes easier, quicker and safer with a Front Runner Cargo Slide. Hold open feature prevents the slide from closing when on uneven surfaces. Push to close dual latching lock securely keeps the unit closed and rattle-free. Load Rating: 250kg / 551.2 lbs. Designed for the worlds toughest roads. The flat drawer contains multiple tie down points and two cargo attachment channels for securing gear with Black Tie Down Rings / Eye Nuts and Stratchits or other style straps. High strength, sealed bearings allow the tray to extend nearly 100% from the anchored base. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. Mounts to flat surfaces. Depending on application, drilling into the vehicle may be required. Designed for interior use only with a canopy, camper shell, or other style load bed cover. All Front Runner Storage Systems are backed by a 2 year warranty. Note: This cargo slide will only fit certain sized pick-up truck load beds and vehicle cargo holds. Please see SPECS for exact product measurements and to determine if this product is the right fit. All vehicles with optional bed liners must check internal measurements. If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase. Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8. Features Consists of:   1 x Cargo Drawer unit 2 x Accessory channels Installation Hardware Fitting Instructions Materials used: Black powder coated high strength steel Nylon carpet Laminated plywood Product Dimensions: Closed: 1350mm (53.2") L x 1125mm (44.3") W x 112mm (4.4") H Opened: 2305mm (90.8") L x 1125mm (44.3") W x 112mm (4.4") H Inner Tray Dimensions: 1336mm (52.6") L x 940mm (37") W x 50mm (2") H Width needed between load bed wheel arches: 1022mm (40.2") Weight: 50.52kg (111.4lbs) Load Rating: 250kg (551.2lbs)

Turn your Mahindra Pik-Up Double Cab into an adventure vehicle with the Slimline II cargo carrying roof rack kit. The kit contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. This 1358mm/53.5" long, full size , Slimline II cargo carrying roof rack kit for your Mahindra Pik-Up Double Cab contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Consisting of:1x LASP104 - No 4 Plus Leg 180mm (Pair)2x LASS104 - No 4 Leg 170mm (Pair)1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.27kg (66.73lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 31kg (68lbs)

Double up the loading space on your Mahindra Pik-Up Double Cab. This robust pick-up truck kit creates a full-size Slimline II rack that sits above the roll-top cover on your Mahindra's load bed. The Slimline II’s lightweight, modular construction makes it highly versatile and allows you to customize your setup with over 55 accessories so you can haul all your adventure gear and toys. This kit creates a full-size rack that sits above your Mahindra Pik-Up's bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 30.36kg (66.93lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 255mm (10")Shipping Weight:Weight: 32kg (70lbs)

Turn your Mahindra Scorpio into an adventure vehicle with the Slimline II cargo carrying roof rack kit. The kit contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Mahindra Scorpio contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. It installs easily with no drilling required. All Front Runner Racks are backed by a Limited Lifetime Warranty*   Consisting of:2x LASS106 - No 6 Leg 195mm (Pair)1x LASS107 - No 7 Leg 225mm (Pair)1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 35.87kg (79.08lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 300mm (12")Shipping Weight:Weight: 37kg (81lbs)

Get your capable Mahindra Scorpion ready for any adventure with the customizable and tough Slimline II Roof Rack. Carrying bikes, camping equipment, kayaks and other gear on your roof rack has never been easier. This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Mahindra Scorpio contains Slimline II Tray and Wind Deflector, as well as 2 Foot Rails for mounting the Tray to the vehicle. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. It installs easily with no drilling required. All Front Runner Racks are backed by a Limited Lifetime Warranty* Consisting of:1x FAMS002 - Mahindra Scorpio (2023-Current) Foot Rails1x RRSTD09 - Slimline II Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.55kg (69.56lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 325mm (13")Length: 1700mm (67")Height: 270mm (11")Shipping Weight:Weight: 38kg (84lbs)  

Clear precious interior and load bed space, and still haul your adventure gear and toys with this Mazda BT50 (2012-2020) Slimline II Roof Rack Kit. This 1358mm/53.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mazda BT50. Easily installs using the existing factory mounting points. No drilling required. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x FAFR003 - Ford Ranger T6/Wildtrak (2012-Current) Foot Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.91kg (63.74lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 30kg (66lbs)