FRONT RUNNER Ford Ranger Retrax Xr 5In (2019-2022) Slimline Ii...
$1,680.30
$1,867.00
Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range.
This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 29.53kg (65.1lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")
Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger Retrax Xr 6In (2019-2022) Slimline Ii...
$1,977.30
$2,197.00
Double up the loading space on your Ford Range with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford Range.
This kit creates a full-size rack that sits above your Ford Ranger’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.4kg (64.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 34kg (75lbs)
FRONT RUNNER Ford Ranger Single Cab Swb Pickup Truck (1993-1998)...
$2,093.40
$2,326.00
Double up the cargo-hauling space on your Ford Ranger Single Cab SWB Pickup Truck with this robust load bed rack. This rack was designed especially for single cab pickup trucks and creates a full-size Slimline II rack that sits above your Ranger’s load bed. The Slimline II’s lightweight, modular construction makes it highly versatile and allows you to haul all manner of loads and customize your setup with over 55 accessories to suit your lifestyle, travel and adventure-sports needs.
This kit creates a full-size rack that sits above your Ford Ranger Single Cab SWB Pickup Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1762mm), 2 Tracks, and 6 Pickup Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)1x TRAC010 - Universal Track Non Drilled / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33kg (72.75lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1830mm (72")Height: 280mm (11")Shipping Weight:Weight: 36kg (79lbs)
FRONT RUNNER Ford Ranger T6 / Wildtrak / Raptor (2012-2022)...
$2,469.60
$2,744.00
Free up your Ranger's load bed space by carrying your adventure gear, or toys, over the load bed with this Ford Ranger DC (2012-Current) Slimline II Leg Mount Load Bed Rack Kit.
This kit creates a full-size rack that sits above your Ford Ranger DC (2012-Current) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LASS034 - Ford Ranger Load Bin Mount Brackets1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 49.05kg (108.14lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1715mm (68")Height: 290mm (11")Shipping Weight:Weight: 48.2kg (106lbs)
FRONT RUNNER Ford Ranger T6 / Wildtrak / Raptor (2012-2022)...
$974.70
$1,083.00
It’s never been easier to start your adventure with the Ford Ranger T6 / Wildtrak / Raptor Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! This Slimsport Roof Rack is ready to play.
Compatible with the Ford Ranger T6 SuperCrew (2012-2022), Ranger Wildtrak SuperCrew (2014-2022) and Ranger Raptor SuperCrew (2019-2022).
Low-profile flat deck Slimsport rack has a load carrying area of 1272mm (50") x 1150mm (45.27").
Sleek side rails have integrated mounting feet.
High-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for all Front Runner side mount accessories (sold separately).
Included standard full fairing with rubber edge trim makes the rack ultra-quiet.
Need a lightbar? The optional Ford Ranger Slimsport Rack 40" Light Bar Wind Fairing Ford Ranger (2012-2022) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow use of 40" LED Light Bar FX1000-CB SM / 12V/24V / Single Mount (both sold separately).
Fitment guide and all mounting hardware included.
Note: Drilling required for fitment (all hardware included).
NO DRILLING REQUIRED FOR WILDTRAK MODELS
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1 x KSFR002 - Ford Ranger T6/Wildtrak (12-2022)Ssport RR K1 x RRAC230 - Ford Ranger Slimsport Rack Wind Fairing1 x RRAC971 - Protection StripInstallation HardwareFitting InstructionsMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:1411mm (55.6") L x 1222mm (48.1") W x 147mm (5.8") HApproximate Installed Weight: 24.52kg (54.06lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 160mm (6")Shipping Weight:Weight: 24.52kg (54lbs)
FRONT RUNNER Ford Ranger T6 / Wildtrak / Raptor (2012-2022)...
$974.70
$1,083.00
Your adventure gear has a low-profile, durable new home on the Ford Ranger (2012-2022) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner. The kit comes ready to mount a light bar, so your journeys don’t have to stop at sunset. Our wide range of compatible accessories makes it easy to haul out to nature for your go-to activities.
Compatible with the Ford Ranger T6 SuperCrew (2012-2022), Ranger Wildtrak SuperCrew (2014-2022) and Ranger Raptor SuperCrew (2019-2022).
This low-profile flat deck Slimsport rack has a load-carrying area of 1272mm (50.07") x 1185mm (46.65")
The sleek side rails have integrated mounting feet.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket {RRAC182~showName) for most Front Runner side mount accessories (sold separately).
Included in the Ford Ranger (2012-2022) Slimsport is a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Drilling required for installation. No drilling is required for Wildtrak models.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KSFR002 - Ford Ranger T6/Wildtrak (12-2022)Ssport RR K1x RRAC191 - Ford Ranger Slimsport Rack 40" L Bar Wind Fairing1x RRAC971 - Protection StripMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 27.45kg (60.52lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 210mm (8")Shipping Weight:Weight: 29kg (64lbs)
FRONT RUNNER Ford Ranger T6 4Th Gen Extended Cab (2012-2022)...
$1,115.10
$1,239.00
Gear up your Ford Ranger T6 4th Gen Extended Cab for any adventure with the Slimline II Roof Rack. This versatile, off-road tough roof rack is compatible with a wide range of accessories which allows you to customize it to suit your lifestyle, adventure sport, and travels. This particular roof rack kit features Low Profile Foot Rails to help minimize drag when carrying loads, which could make it more fuel-efficient.
This 954mm/37.6” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Ford Ranger T6 4th Gen Extended Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFR009 - Ford Ranger T6 4Gen ExCab(2012-Curr)Foot Rails/Low1x RRSTD05 - SLII Tray - 1255mm(W)X954mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 20.69kg (45.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 165mm (6")Shipping Weight:Weight: 21kg (46lbs)
FRONT RUNNER Ford Ranger T6 Wildtrak/Raptor Double Cab (2012-2022) Pro...
$2,621.70
$2,913.00
Get ready to massively up the gear-carrying capacity in the load bed area of your Ford Ranger T6 Wildtrak Raptor with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available rack accessories can go on the Slimline II—no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Ford Ranger T6 Wildtrak Raptor load bed.
Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Ford Ranger T6 Wildtrak Raptor with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.Note: This Pro Bed Kit is not compatible with the Twin Wolf Pack Pro Cargo System Bracket
Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x PBFR001S - Ford Ranger T6 Wildtrak Raptor (2012-2022) Pro Bed3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)
Material Used:Black epoxy powder - coated T6 aluminium
Installed height from load bed ledge:640mm/ 25.19"
Approximate Installed Weight: 79.3kg (174.83lbs)
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 785mm (31")
Shipping Weight:Weight: 82kg (180lbs)
FRONT RUNNER Ford Ranger T6 Wildtrak/Raptor Double Cab (2012-2022) Pro...
$1,295.10
$1,439.00
Get ready to massively up the gear-carrying capacity in the load bed area of your Ford Ranger T6 Wildtrak Raptor with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available rack accessories can go on the Slimline II—no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Ford Ranger T6 Wildtrak Raptor load bed.
Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Ford Ranger T6 Wildtrak Raptor with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.Note: This Pro Bed Kit is not compatible with the Twin Wolf Pack Pro Cargo System Bracket
Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x PBFR001S - Ford Ranger T6 Wildtrak Raptor (2012-2022) Pro Bed3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)
Material Used:Black epoxy powder - coated T6 aluminium
Installed height from load bed ledge:640mm/ 25.19"
Approximate Installed Weight: 79.3kg (174.83lbs)
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 785mm (31")
Shipping Weight:Weight: 82kg (180lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak Double Cab W/Oem Roll...
$1,467.00
$1,630.00
This kit creates a full-size rack that sits above your Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Ford Ranger T6.2 DOES NOT have a standard OEM Roll Top, Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline II Load Bed Rack Kit is available.
Features
KRFR024T - Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit
Consisting of:
3x FASS016 - Flat Feet (pair) / 65mm
3x RRAC962 - Track Mount Stud Plate
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.94kg (52.78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Length = 1720mm
Width = 1445mm
Height = 250mm
Shipping Weight:
Weight = 29kg
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline Ii Load...
$1,898.10
$2,109.00
This kit creates a full-size rack that sits above your Ford Ranger Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm), 2 Load Bed Mounts, and 6 Pickup Legs that fit into the Load Bed Mounts.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Ford Ranger T6.2 comes standard with the OEM Roll Top, Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit is available.
Features
KRFR025T - Ford Ranger T6.2 (2022-Curr)SLII Load Bed Rack Kit
Consisting of:
3x LASS026 - Universal Load Bed Leg / Tall (Pair)
1x LASS046 - Ford Rngr T6.2 (22-Curr) Ld bd rck mount system
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 33.7kg (74.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 295mm (12")
Shipping Weight:
Weight: 39kg (86lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro...
$2,408.40
$2,676.00
Get ready to massively up the gear-carrying capacity in the load bed area of your Ford Ranger T6.2 with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor load bed.
Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Ford Ranger T6.2 Wildtrak/Raptor with specific mounting brackets bolted to the existing factory mounting points.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
PBFR002T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBFR002S - Ford Ranger T6.2 Next Gen (2023-Current) Pro Bed S
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 70.63kg (155.71lbs)
Shipping Dimensions:
Width: 460mm (18")
Length: 1720mm (68")
Height: 640mm (25")
Shipping Weight:
Weight: 83kg (183lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro...
$1,081.80
$1,202.00
This tough, lightweight steel and aluminum cargo system secures to the load bed of your Ford Ranger T6.2 Wildtrak/Raptor Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit several accessories to its sides or even a Front Runner rack. These include molle panels, storage boxes or recovery tracks. With this incredible cargo system, you can pack all the necessary overland, camping or sports gear.
This Pro Bed System is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Ford Ranger T6.2 Wildtrak/Raptor Double Cab with specific mounting brackets bolted to the existing factory mounting points.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
Features
PBFR002S - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBFR002 - Ford Ranger T6 Wildtrak Raptor (22-Current) Pro
1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 49.86kg (109.92lbs)
Shipping Dimensions:
Width: 640mm (25")
Length: 1280mm (50")
Height: 460mm (18")
Shipping Weight:
Weight: 52kg (114lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline...
$1,458.90
$1,621.00
Unleash your Ford Ranger T6.2 Wildtrak/Raptor's full cargo and gear transporter potential with the sleek, low profile yet ultra-tough Slimline II Roof Rack. Whether it's mountain biking that pumps your adrenaline or overlanding that quenches your thirst for exploration, our wide range of accessories has you covered. Adventure awaits!
This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) low-profile Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the Fitment Guide in the Install tab.
Drilling required for installation. No drilling is required for Wildtrak models.
Note: Under-rack accessories and some side-mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Consisting of:
1x FAFR012 - Ford Rngr T6.2(22-Cur)VW Amark (23-Cur)Low Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport...
$975.00
$1,083.00
Transform your Ford Ranger T6.2 Wildtrak/Raptor Double Cab into the ultimate gear carrier with the extremely quiet Slimsport Roof Rack. The high-strength aluminium slats have T-slots, which makes them suitable for the wide range of top-mount Front Runner accessories.
This low-profile flat deck Slimsport rack has a load-carrying area of 1272mm (50") L x 1166mm (45.9") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSFR009T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray
1x RRAC313 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt WF
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1448mm (57") L x 1233mm (48.5") W x 147mm (5.8")
Approximate Installed Weight: 21.95kg (48.39lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 26kg (57lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport...
$975.00
$1,083.00
Transform your Ford Ranger T6.2 Wildtrak/Raptor Double Cab into an absolute beast of a gear carrier with the low-profile Slimsport Roof Rack. This included Wind Fairing has been designed to host a slim 40" Light Bar and move air up, over the rack and cargo, thus reducing wind noise.
This low-profile flat deck Slimsport rack has a load carrying area of 1272mm (50") L x 1166mm (45.9") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included is the Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing with a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSFR008T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray
1x RRAC312 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt 40" Lbar WF
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1448mm (57") L x 1233mm (48.5") W x 147mm (5.8")
Approximate Installed Weight: 21.23kg (46.8lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 26kg (57lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current)/ Volkswagen...
$1,462.50
$1,625.00
This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation.
All Front Runner Racks are backed by a limited lifetime warranty*
Features
KRFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit
Consisting of:
1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.221kg (66.63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 300mm (12")
Shipping Weight:
Weight: 7.22kg (16lbs)
FRONT RUNNER Ford Ranger T6/Wildtrak 3Rd Gen (2012-2019) Slimline Ii...
$1,489.50
$1,655.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFR007T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFR003 - Ford Ranger T6/Wildtrak (2012-2019) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.91kg (63.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger T6/Wildtrak 3Rd Gen (2012-2019) Slimline Ii...
$1,488.00
$1,653.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRFR008T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FAFR004 - Ford Ranger (2012-2019) Foot Rails / Low Profil
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.87kg (63.65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger T6/Wildtrak/Raptor (2012-2022) Slimline Ii Roof Rack...
$1,498.50
$1,665.00
This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
An opening on the Foot Rails allows access to Front Runner Under Rack Mount Tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the Fitment Guide in the Install tab.
Drilling is required for installation.
Features
KRFR012T - Ford Ranger T6/Wildtrak/Raptor (2012-2022) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFR005 - Ford RangerT6/Wildtrak/Raptor(2012-2022)Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.91kg (63.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 29kg (64lbs)
FRONT RUNNER Ford Ranger Wildtrak (2014-2022) Roll Top Slimline Ii...
$1,598.40
$1,776.00
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT032T - Ford Ranger Wildtrak (2014-Curr) Roll Top Slimline II Load Bed Rack Kit / Tall - by Front Runner
Consisting of:
3x LASS033 - Pick Up Roll Top Leg Mount / Tall (Pair)
3x RRAC962 - Track Mount Stud Plate
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.56kg (62.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 28.8kg (63lbs)
FRONT RUNNER Ford Ranger Wildtrak/Raptor (2012-Current) Roll Top Slimline Ii...
$1,571.40
$1,746.00
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak/Rapotor's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT016T - Ford Ranger Wildtrak/Raptor (2012-Curr) Roll Top Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
3x RRAC962 - Track Mount Stud Plate
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.51kg (60.65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 230mm (9")
Shipping Weight:
Weight: 25.91kg (57lbs)
FRONT RUNNER Ford Super Cab (2012-Current) Slimline Ii Roof Rack...
$1,342.80
$1,492.00
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford Super Cab 2012+ contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFS004T - Ford Super Cab (2012-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
1 x TRFS002 - Ford Super Cab T6 (2012-Current) Tracks / 1080mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.3kg (51.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
26.4kg (58.0lbs)
FRONT RUNNER Ford Super Duty F-250-F-350 (1999-Current) Slimline Ii Roof...
$1,829.70
$2,033.00
This 1560mm/61.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-250 Super Duty. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRFF010T - Ford Super Duty F-250-F-350 (1999-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FAFF002 - Ford F-250 F-350 (1999-Current) Foot Rails / Low
1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.75kg (67.79lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 240mm (9")
Length: 1730mm (68")
Height: 95mm (4")
Shipping Weight:
Weight: 30.6kg (67lbs)
FRONT RUNNER Ford Tourneo/Transit Custom Lwb (2013-Current) Slimline Ii Roof...
$2,870.10
$3,189.00
This 2772mm/109.1" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Tourneo/Transit Custom LWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT003T - Ford Tourneo/Transit Custom LWB (2013-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT002 - Ford Tourneo/TransitCustomLWB(2013-Curr)Foot Rails1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 54.62kg (120.42lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 53.2kg (117lbs)
FRONT RUNNER Ford Tourneo/Transit Custom Swb (2013-2022) Slimline Ii Roof...
$2,591.10
$2,879.00
This 2368mm/93.2" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Tourneo/Transit Custom SWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT004T - Ford Tourneo/Transit Custom SWB (2013-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT003 - Ford Tourneo_Transit CustomSWB(2013-Cur) Foot Rail
1x RRSTM12 - SLII Tray - 1475mm(W)X2368mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 48.26kg (106.39lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 49.4kg (109lbs)
FRONT RUNNER Ford Transit (L2H2/130In Wb/Medium Roof) (2013-Current) Slimpro Van...
$1,604.70
$1,783.00
Compatible with Ford Transit (L2H2/130" WB) (2013-Current) medium roof vans with a vehicle length of 5531mm / 217.8".
Load-carrying area: 2368mm (93") x 1470mm (57.9") .
Six (6) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT001T - Ford Transit (L2H2/130" WB/Medium Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
3x RRNS1425 - Narrow Slat / 1425mm (Pair)
2x SPVT001 - Van Rack Side Profile / 1156mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2368mm (93") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 26.59kg (58.62lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 29.35kg (65lbs)
FRONT RUNNER Ford Transit (L2H3/130In Wb/High Roof) (2013-Current) Slimpro Van...
$1,604.70
$1,783.00
Compatible with Ford Transit L2/H3 / 130" wheelbase high roof vans with a vehicle length of 5531mm / 217.8".
Load-carrying area: 2368mm (93") x 1470mm (57.9").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT002T - Ford Transit (L2H3/130" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
3x RRNS1425 - Narrow Slat / 1425mm (Pair)
2x SPVT001 - Van Rack Side Profile / 1156mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2368mm (93") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 26.59kg (58.62lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 29.35kg (65lbs)
FRONT RUNNER Ford Transit (L3H2/148In Wb/Medium Roof) (2013-Current) Slimpro Van...
$2,087.10
$2,319.00
Compatible with Ford Transit L3/H2 / 148"WB medium roof vans with a vehicle length of 5981mm / 235.5".
Load-carrying area: 2974mm (117.1") x 1470mm (57.9").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT003T - Ford Transit (L3H2/148" WB/Medium Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2974mm (117.1") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 34.45kg (75.95lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 37.35kg (82lbs)
FRONT RUNNER Ford Transit (L3H3/148In Wb/High Roof) (2013-Current) Slimpro Van...
$2,087.10
$2,319.00
Compatible with Ford Transit (L3H3/148" WB) (2013-Current) high roof vans with a vehicle length of 5981mm / 235.5".
Load-carrying area: 2974mm (117.1") x 1470mm (57.9").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT004T - Ford Transit (L3H3/148" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2974mm (117.1") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 34.45kg (75.95lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 37.35kg (82lbs)
FRONT RUNNER Ford Transit (L4H3/148In Wb/High Roof) (2013-Current) Slimpro Van...
$2,514.60
$2,794.00
Compatible with 2013-Current Ford Transit (L4H3/148" WB) High roof vans with a vehicle length of 6704mm / 263.9".
Load-carrying area: 3580mm (141") x 1470mm (57.9").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket standard configuration at 123mm (4.8").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT005T - Ford Transit (L4H3/148" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
5x RRNS1425 - Narrow Slat / 1425mm (Pair)
2x SPVT004 - Van Rack Side Profile / 1762mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
3580mm (141") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 43.45kg (95.79lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 44.35kg (98lbs)
FRONT RUNNER Ford Transit 6Th Gen (2006-2013) Slimline Ii Roof...
$3,528.00
$3,920.00
This 2570mm/101.18" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Transit contains Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount Legs for mounting the Tray to the vehicle.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
Installs easily with no drilling required.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT005T - Ford Transit 6th Gen (2006-2013) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
5x LASS103 - No 3 Leg 155mm (Pair)5x RRAC109 - Gutter Mount Leg Extensions1x RRSTP13 - SLII Tray - 1575mm(W)X2570mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 68.24kg (150.44lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1720mm (68"); Height: 270mm (11")
Shipping Weight:
Weight: 70kg (154lbs)
FRONT RUNNER Ford Transit Passenger Van Xlt (2013-Current) Slimline Ii...
$1,606.50
$1,785.00
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains the Slimline II Tray, Wind Deflector, and 4 foot rails to mount the Slimline II Tray to your Ford Transit Passenger Van XLT. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT002T - Ford Transit Passenger Van XLT (2013-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT001 - Ford Transit Passenger Van XLT (2013-Current) Foot Rails
1x RRSTM06 - SLII Tray - 1475mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 31.96kg (70.46lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 300mm (12")
Shipping Weight:
Weight: 32.14kg (71lbs)
FRONT RUNNER Ford Transit Passenger Van Xlt (2013-Current) Slimline Ii...
$2,749.50
$3,055.00
This 2772mm/109.1" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Ford Transit Passenger Van XLT (USA 148 SPEC) (Euro L3H2 & L3H3 Spec). Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Suitable for Transit Passenger Van XL /XLT 148 WB (length 236') H1 /H2.
Features
KRFT001T - Ford Transit Passenger Van XLT (2013-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT001 - Ford Transit Passenger Van XLT (2013-Current) Foot Rails
1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 50.33kg (110.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 51.6kg (114lbs)
FRONT RUNNER Freightliner Sprinter Van (2007-Current) Slimline Ii 1/2 Roof...
$3,339.90
$3,711.00
This 2312mm/91" long, 1/2 Slimline II cargo carrying roof rack kit for the Freightliner Sprinter (2007+) contains 2 Slimline II Trays, Wind Deflector, Track set and 12 Mounting Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFS006T - Freightliner Sprinter Van (2007-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
6 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner
2 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 55kg (120lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1800mm (71")
Height 380mm (15")
Shipping Weight:
Weight 63.4kg (139.5lbs)
FRONT RUNNER Freightliner Sprinter Van (2007-Current) Slimline Ii 1/4 Roof...
$2,241.00
$2,490.00
This 1560mm/61.4" long, Slimline II cargo carrying roof rack kit for the Freightliner Sprinter (2007+) contains a Slimline II Tray, Wind Deflector, Track set and 6 Mounting Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFS007T - Freightliner Sprinter Van (2007-Current) Slimline II 1/4 Roof Rack Kit - by Front Runner
Consisting of:
3 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner
1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35kg (77lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1795mm (71")
Height 260mm (10")
Shipping Weight:
Weight 40.9kg (90.0lbs)
FRONT RUNNER Freightliner Sprinter Van (2007-Current) Slimline Ii Roof Rack...
$3,879.90
$4,311.00
This 3120mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the Freightliner Sprinter (2007+) contains 2 Slimline II Trays, Wind Deflector, Track Set and 12 Mounting Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFS005T - Freightliner Sprinter Van (2007-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
6 x FASS016 - Flat Feet (pair) / 65mm - by Front Runner
2 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 61kg (135lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1800mm (71")
Height 380mm (15")
Shipping Weight:
Weight 71.4kg (157.1lbs)
FRONT RUNNER Gmc Canyon (2015-2022) Slimline Ii Roof Rack Kit...
$1,493.10
$1,659.00
This 1358mm/53.5 long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRGC001T - GMC Canyon (2015-2022) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FACC001 - Chev Colorado/GMC Canyon (2015-2022) Foot Rails - by Front Runner
1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1615mm (64")
Height 245mm (10")
Shipping Weight:
Weight 30.1kg (66.2lbs)
FRONT RUNNER Gmc Canyon Roll Top 5.1' (2015-Current) Slimline Ii...
$1,800.00
$2,000.00
This kit creates a full-size rack that sits above your GMC Canyons Roll Top (2015-present) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Pickup Truck Roll Top Leg Mounts that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRGC002T - GMC Canyon Roll Top 5.1' (2015-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
1x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 31.41kg (69.25lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18")
Length: 1730mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 34.63kg (76lbs)
FRONT RUNNER Gmc Sierra 1500 (2007-Current) Slimline Ii Load Bed...
$2,244.60
$2,494.00
This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRGM009T - GMC Sierra 1500 (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.9kg (85.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18.0")
Length: 1730mm (68.0")
Height: 290mm (11.0")
Shipping Weight:
39.4kg (87.0lbs)
FRONT RUNNER Gmc Sierra 1500 / Short Load Bed (2007-Current)...
$2,028.60
$2,254.00
This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRGM008T - GMC Sierra 1500 / Short Load Bed (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.3kg (77.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18.0")
Length: 1730mm (68.0")
Height: 285mm (11.0")
Shipping Weight:
35.8kg (79.0lbs)
FRONT RUNNER Gmc Sierra Crew Cab (2014-Current) Triple Load Bar...
$953.10
$1,059.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGM013 - GMC Sierra Crew Cab (2014-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner
1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 16.1kg (35.6lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 1685mm (66.0")
Length: 125mm (5.0")
Height: 385mm (15.0")
Shipping Weight:
15.6kg (34.0lbs)
FRONT RUNNER Gmc Sierra Crew Cab / Short Load Bed...
$935.10
$1,039.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab / Short Load Bed. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGM012 - GMC Sierra Crew Cab / Short Load Bed (2014-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 15.9kg (35.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 1685mm (66.0")
Length: 125mm (5.0")
Height: 385mm (15.0")
Shipping Weight:
15.2kg (33.0lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1165Mm(W)...
$1,191.60
$1,324.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Grab-On Feet to mount the Slimline II Tray to the roof rails of your Subaru Forester Wilderness. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
This rack kit can be removed leaving your vehicles roof and roof rails in their original condition.
Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.
For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.
Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.
Please contact us for advice on specific mounting solutions for your vehicle and use.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
Features
KRSF005T - Subaru Forester Wilderness (2022-Current) Slimline
Consisting of:
2x GOFR001 - Rail Foot Base (Pair)2x GORR052 - Raised Rail Outer Grips / No. 32x GORR072 - Raised Rail Inner Grips / C1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 22.94kg (50.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 160mm (6")
Shipping Weight:
Weight: 25kg (55lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1165Mm(W)...
$1,321.20
$1,468.00
This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRGM008T - GMC Sierra 1500 / Short Load Bed (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.3kg (77.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18.0")
Length: 1730mm (68.0")
Height: 285mm (11.0")
Shipping Weight:
35.8kg (79.0lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1165Mm(W)...
$957.60
$1,064.00
This kit creates a full size rack that sits above your Nissan Frontier's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRNF001T - Nissan Frontier Pickup (1997-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1165Mm(W)...
$1,074.60
$1,194.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Subaru Forester (2007-2013). This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
This rack kit can be removed leaving your vehicles roof and roof rails in their original condition.
Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.
For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.
Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.
Please contact us for advice on specific mounting solutions for your vehicle and use.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
Features
KRSF003T - Subaru Forester (2007-2013) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner
2 x GORR053 - Raised Rail Outer Grab-On / No. 4 - by Front Runner
2 x GORR071 - Raised Rail Inner Grab-On / B - by Front Runner
1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 21kg (46lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 285mm (11")
Shipping Weight:
Weight 24.3kg (53.4lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1255Mm(W)...
$1,245.60
$1,384.00
Get your Suzuki Fronx geared-up for all types of adventures with the proven tough Slimline II Roof Rack Kit. This modular rack has 55+ available accessories, so transporting cargo, bicycles, kayaks, camping, or overland gear will be a breeze. Front Runner's popular Under Rack Table can be fitted to this rack so you can picnic wherever you stop.
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Suzuki Fronx. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSF006T - Suzuki Fronx (2023 - Current) Slimline II Roof Rack
Consisting of:
1x FASF001 - Suzuki Fronx (2023 - Current) Foot Rails
1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.14kg (51.01lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 595mm (23")
Length: 1720mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 29kg (64lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1255Mm(W)...
$1,213.20
$1,348.00
This 752mm/29.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Fiat 500X. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
This rack kit can be removed leaving your vehicles roof and roof rails in their original condition.
For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.
For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.
Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.
Please contact us for advice on specific mounting solutions for your vehicle and use.
Note: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
Features
KRFF007T - Fiat 500X (2014-Curr) Slimline II Roof Rack Kit
Consisting of:
2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner
2 x GOFR011 - Flush Rail Grab-On Outer Grips / No. 2 - by Front Runner
2 x GOFR034 - Flush Rail Grab-On Inner Grips / E - by Front Runner
1 x RRSTD04 - Slimline II Tray - 1255mm(W) X 752mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 17kg (38lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 20.0kg (44.0lbs)
FRONT RUNNER Grab-On Flush Rail Slimline Ii Kit - 1255Mm(W)...
$1,378.80
$1,532.00
This 1964mm/77.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your 2016+ Toyota Fortuner. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF010T - Toyota Fortuner (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF005 - Toyota Fortuner (2016-Current) Foot Rails - by Front Runner
1 x RRSTA10 - Slimline II Tray - 1165mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (73lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 630mm (25")
Length 1640mm (65")
Height 160mm (6")
Shipping Weight:
Weight 38.8kg (85.3lbs)
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6...
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
