Front Runner
FRONT RUNNER Slimsport Roof Rack Kit Fits Toyota 4Runner 5Th Gen 2010-On - KSTF003T
$1,445.40
$1,606.00
This low profile flat deck Slimsport rack has a load carrying area of 2228mm (87.7") L x 1181mm (46.5").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota 4Runner (2009-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTF003T - Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit
1 x RRAC234 - TOYOTA4RUNNER SLIMSPORT RACK WIND FAIRING
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37kg (81.57lbs)
Assembled Rack Kit Dimensions:
2228mm (87.7") L x 1181mm (46.5") W x 121mm (4.7") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Condor - KRTC001L
$1,766.70
$1,963.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Condor contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTC001L - Toyota Condor Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.9kg (72.4lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Corolla Cross 2020-On - KRTC002T
$1,312.20
$1,458.00
Ignite your Toyota Corolla Cross's spirit of adventure and transform it into a reliable gear and sports carrier with the robust Slimline II Roof Rack Kit. No drilling is needed to fit the Slimline II Tray, Foot Rails and Wind Deflector.
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Corolla Cross. It easily installs using the existing factory mounting points. No drilling required.All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Only suitable for versions with OEM roof rails.
Features
KRTC002T - Toyota Corolla Cross (2020-Current) Slimline II Roof Rack Kit
Consisting of:
1x FATC001 - Toyota Corolla Cross (2020 - Current) Foot Rails
1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 21.6kg (47.62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 27kg (59lbs)
Front Runner
FRONT RUNNER Toyota Tacoma Retrax Xr 6In (2005-Current) Triple Load Bar Kit - KRTT966
$811.80
$902.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT966 - Toyota Tacoma ReTrax XR 6" (2005-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8kg (17.64lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1510mm (59"); Height: 150mm (6")
Shipping Weight:
Weight: 10kg (22lbs)
Front Runner
FRONT RUNNER Toyota Tundra (2007-Current) Load Bed Load Bars Kit - KRTT951T
$516.60
$574.00
This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pairs of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tundras 2007+
If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This Front Runner Load Bar Kit works with the existing Toyota Tundra factory bed rails.
This Load Bar Kit contains a pair of 1475mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Toyota Tundras 2007+
The Front Runner Load Bar Kit is ideal for mounting accessories to your vehicle when a strong, lightweight, low profile, smaller footprint is preferred.
The Front Runner Load Bar Kits utilize the same 22mm thick HD aluminium extrusions (slats) used in the Slimline II Roof Rack.
The sliding nut t-slots on the Load Bars allow unlimited, ultra secure mounting positions as well as quick removal of accessories and equipment.
Accessories can be mounted to t-slots on the top and bottom of the Load Bars.
DID YOU KNOW? These load bars can be used as slats in a similar width Slimline II Roof Rack. When you buy Front Runner Load Bars you are one step closer to owning a Front Runner Slimline II Roof Rack!
Features
KRTT951T - Toyota Tundra (2007-Current) Load Bed Load Bars Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (15lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 240mm (9")
Length 1490mm (59")
Height 130mm (5")
Shipping Weight:
Weight 8.0kg (17.6lbs)
Front Runner
FRONT RUNNER Toyota Tundra (2022-Current) Slimsport Rack 40In Light Bar Wind Fairing - RRAC264
$225.90
$251.00
Lightbar wind fairing for Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab (2022-Current) Slimsport Rack 40" Light Bar Wind Fairing
1 x Fitting Instructions
Installation Hardware
Materials used:
Black power coated steel
Product Dimensions:
1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:
4.2kg (9.3lbs)
Front Runner
FRONT RUNNER Ute Canopy/Trailer With Oem Track Slimline Ii Rack Kit 1475Mm X 1358Mm - KRCAT66TN
$1,446.30
$1,607.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 1358mm/53.5" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 23kg (51lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 1358mm (53")Height 70mm (3")
Shipping Weight:
Weight 27.1kg (59.6lbs)
Front Runner
FRONT RUNNER Ute Canopy/Trailer With Oem Track Slimline Ii Rack Kit 1475Mm X 1560Mm - KRCAT67TN
$1,563.30
$1,737.00
Short:This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 1560mm/61.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 25kg (55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 1560mm (61")Height 70mm (3")
Shipping Weight:
Weight 29.3kg (64.5lbs)
Front Runner
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack Kit / 1425(W) X 1358(L) - KRRT001T
$1,537.20
$1,708.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 4 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT001T - Bakkie Roll Top Slimline II Load Bed Rack Kit / 1425(W) x 1358(L) - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.05kg (59.63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1610mm (63"); Height: 235mm (9")
Shipping Weight:
Weight: 27.82kg (61lbs)
Front Runner
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack Kit 1425 X 1762 Tall - KRRT027T
$2,004.30
$2,227.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1762mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT027T - Pickup Roll Top Slimline II Load Bed Rack Kit / 1425(W) x 1762(L) / Tall - by Front Runner
Consisting of:
3 x LASS033 - Pick Up Roll Top Leg Mount / Medium (Pair)
1 x RRSTJ09 - Slimline II Tray - 1425mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 34.6kg (76.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1720mm (68.0")
Height: 280mm (11.0")
Shipping Weight:
35.4kg (78.0lbs)
Front Runner
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack Kit / 1475(W) X 1762(L) / Tall - KRRT028T
$2,043.90
$2,271.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1762mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT028T - Pickup Roll Top Slimline II Load Bed Rack Kit / 1475(W) x 1762(L) / Tall - by Front Runner
Consisting of:
3 x LASS033 - Pick Up Roll Top Leg Mount / Medium (Pair)
1 x RRSTM09 - Slimline II Tray - 1475mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.4kg (78.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1730mm (68.0")
Height: 240mm (9.0")
Shipping Weight:
36.4kg (80.0lbs)
Front Runner
FRONT RUNNER Ute Roll Top With No Oem Track Slimline Ii Load Bed Rack Kit / 1425(W) X 1156(L) -...
$1,554.30
$1,727.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm), 2 Tracks and 4 Pickup Roll Top Leg Mounts that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT014T - Bakkie Roll Top with No OEM Track Slimline II Load Bed Rack Kit / 1425(W) x 1156(L) - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)1x TRCA003 - Canopy Tracks / 1150mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.79kg (61.27lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1730mm (68"); Height: 265mm (10")
Shipping Weight:
Weight: 28.25kg (62lbs)
Front Runner
FRONT RUNNER Ute Roll Top With No Oem Track Slimline Ii Load Bed Rack Kit / 1425(W) X 1358(L) /...
$1,895.40
$2,106.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm), 2 Tracks and 6 Pickup Roll Top Leg Mounts that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT029T - Pickup Roll Top with No OEM Track Slimline II Load Bed Rack Kit / 1425(W) x 1358(L) / Tall - by Front Runner
Consisting of:
3 x LASS033 - Pick Up Roll Top Leg Mount / Medium (Pair)
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
1 x TRCA009 - Canopy Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.7kg (72.1lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1730mm (68.0")
Height: 270mm (11.0")
Shipping Weight:
33.0kg (73.0lbs)
Front Runner
FRONT RUNNER Ute Slimline Ii Load Bed Kit / 1345(W) X 1358(L) - KRLB007T
$1,579.50
$1,755.00
This Pickup Load Bed kit contains the Slimline II tray (1345mm x 1358mm), (2) Load Bed Tracks and (4) Load Bed Legs that fit into the Tracks.This rack fits a load bed width of 1405mm - 1494mm (55-58") and length of 1270mm - 1550mm (50-61").This kit creates a full size rack that is fitted above a pickup truck load bed. Drilling is required for installation.
This kit creates a full size rack that is fitted above a pick-up truck load bed.
Features
KRLB007T - Pickup Truck Slimline II Load Bed Kit / 1345(W) x 1358(L) - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTG07 - Slimline II Tray - 1345mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 25kg (55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 29.0kg (63.8lbs)
Front Runner
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit / 1165(W) X 1560(L) - KRLB008T
$1,677.60
$1,864.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1165mm/45.9" (W) x 1560mm/61.4" (L)), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
This rack fits a load bed width of 1000mm - 1320mm (39-52") and length of 1551mm - 1803mm (61-71").
Features
KRLB008T - Pick-Up Truck Slimline II Load Bed Rack Kit / 1165(W) x 1560(L) - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRSTA08 - Slimline II Tray - 1165mm(W) X 1560mm(L) - by Front Runner
1 x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 25kg (55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 29.2kg (64.3lbs)
Front Runner
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit / 1255(W) X 1964(L) - KRLB019T
$2,204.10
$2,449.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm/49.4" (W) x 1964mm/77.3" (L)), 2 Tracks, and 8 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
This rack fits a load bed width of 1321mm - 1404mm (52-55") and length of 2033mm - 2438mm (80-96").
Features
KRLB019T - Pick-Up Truck Slimline II Load Bed Rack Kit / 1255(W) x 1964(L) - by Front Runner
Consisting of:
4 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner
1 x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 34kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 39.0kg (85.8lbs)
Front Runner
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit / 1345(W) X 1964(L) - KRLB020T
$2,279.70
$2,533.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm/53" (W) x 1964mm/77.3" (L)), 2 Tracks, and 8 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
This rack fits a load bed width of 1405mm - 1494mm (55-58") and length of 2033mm - 2438mm (80-96").
Features
KRLB020T - Pick-Up Truck Slimline II Load Bed Rack Kit / 1345(W) x 1964(L) - by Front Runner
Consisting of:
4 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
1 x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35kg (76lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 40.3kg (88.6lbs)
Front Runner
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit 1425 X 1762 - KRLB016T
$2,064.60
$2,294.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1762mm/69.4" (L)), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
This rack fits a load bed width of 1495mm - 1575mm (58-62") and length of 1804mm - 2032mm (71-80").
Features
KRLB016T - Pick-Up Truck Slimline II Load Bed Rack Kit / 1425(W) x 1762(L) - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRSTJ09 - Slimline II Tray - 1425mm(W) X 1762mm(L) - by Front Runner
1 x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 32kg (70lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Front Runner
FRONT RUNNER Slimline Ii Load Bed Rack Kit Fits Chevrolet Colorado Ute 2004-On - KRCC001T
$1,633.50
$1,815.00
This kit creates a full size rack that sits above your Chevrolet Colorado's 2004+ truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm), 2 Tracks, and 4 Ute Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRCC001T - Chevrolet Colorado Pickup (2004-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)
Front Runner
FRONT RUNNER Slimline Ii Load Bed Rack Kit Fits Chevrolet Silverado Standard Ute 1987-On - KRCS001T
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Chevrolet Silverado's 1987+ truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Ute Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRCS001T - Chevrolet Silverado Standard Pickup (1987-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.7lbs)
Front Runner
FRONT RUNNER Slimline Ii Load Bed Rack Kit Fits Ford Ranger Ute 1998-2012 - KRFR001T
$1,669.50
$1,855.00
This kit creates a full size rack that sits above your Ford Ranger's (1998-2012) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRFR001T - Ford Ranger Bakkie (1998-2012) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.77kg (61.22lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 140mm (6")
Shipping Weight:
Weight: 29.54kg (65lbs)
Front Runner
FRONT RUNNER Slimline Ii Load Bed Rack Kit Fits Ford Ranger Super Cab 2-Door Ute 1998-2012 - KRFR002T
$1,525.50
$1,695.00
This kit creates a full size rack that sits above your Ford Ranger Super Cab 2-Door 1998-2012 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRFR002T - Ford Ranger Super Cab 2-Door Pickup (1998-2012) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.1lbs)
Front Runner
FRONT RUNNER Front Face Plate Set For Ute Drawers Large - SSCA049
$33.30
$37.00
A set of Front Face Plates to complete the front of the 6 Wolf Pack Drawer / Wide Incl. Boxes or Ute Drawers / Large.
The left hand Face Plate has 4 knock-outs that can be used to fit electrical switches for lighting, compressors or water pumps.
The right hand Face Plate has 2 knock-outs that accommodate water connectors and taps for various Front Runner water containers or tanks such as the Stainless Steel Water Tank for Ute Drawer System / 52l that can be fitted and fixed to the rear of the 6 Wolf Pack Drawer / Wide Incl. Boxes or Ute Drawers / Large.
This Front Face Plate Set is black powder coated to match the drawer systems.
Front Face Plates are used when a Deck Completion Set is unavailable for your ute or you have chosen not to fit the Deck Completion Set.
Fits to your ute drawer system with the supplied hardware.
Features
Consists of:
1 x Set of Face Plates (1 Left Hand side & 1 Right Hand side)
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
78mm (3.1") L x 135mm (5.3") W x 280mm (11") H (per Single Face Plate)
Weight:
1.1kg (2.4lbs) (per Pair)
Front Runner
FRONT RUNNER Load Bar Kit Gutter Mount Fits Vw T3 Transporter/Kombi - KRVK003L
$492.30
$547.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1475mm Load Bars and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRVK003L - Volkswagen T3 Transporter/Kombi Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 180mm (7")
Length 1590mm (63")
Height 120mm (5")
Shipping Weight:
Weight 8.6kg (19.0lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Vw T3 Transporter/Kombi - KRVK001L
$2,741.40
$3,046.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for your Volkswagen T3 Transporter/Kombi contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVK001L - Volkswagen T3 Transporter/Kombi Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 44kg (96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 50.7kg (111.5lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Vw T5 Transporter Swb 2003-2015 - KRVK004T
$2,524.50
$2,805.00
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Volkswagen T5 Transporter SWB. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRVK004T - Volkswagen T5 Transporter SWB (2003-2015) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAVT001 - Volkswagen T5 Caravelle/Transporter Foot Rails
1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 50.92kg (112.26lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 620mm (24")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 48.38kg (106lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Kit Fits Ram Pro Master 1500 118In Wb/Low Roof 2014-On - KVRP001T
$2,101.50
$2,335.00
Compatible with RAM Pro Master 1500 (118" WB) (2014-Current) low roof vans with a vehicle length of 4973mm / 195.8".
Load-carrying area: 2570mm (101.2") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVRP001T - RAM Pro Master 1500 (118" WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF002 - FPCR Foot Set - by Front Runner
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1475 - Narrow Slat / 1475mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2570mm (101.2") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 30.99kg (68.32lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 35.35kg (78lbs)
Front Runner
FRONT RUNNER Ram Pro Master 1500 (136In Wb/High Roof) (2014-Current) Slimpro Van Rack Kit - KVRP003T
$2,173.50
$2,415.00
Securely mount the Front Runner Easy-Out Awning, as well as other popular awning brands, to the Slimline II Roof Rack. This no drill, off-road tough mounting solution offers a refined alternative to the ugly and bulky galvanized L brackets.
These strong brackets are powder coated black with the same weather resistant finish as all Front Runner accessories.
Consists of:3x Brackets1x Nuts and Bolts kitProduct Dimensions:49mm (1.92") L x 128mm (5.03") W x 87.5mm (3.44") HWeight:1.36kg (2.99lbs)Materials used:3mm (0.118") Black powder coated steel
Front Runner
FRONT RUNNER Ram Pro Master 1500 (136In Wb/Low Roof) (2014-Current) Slimpro Van Rack Kit - KVRP002T
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for RAM Pro Master vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with RAM Pro Master 1500 (136" WB/Low Roof) (2014-Current) low roof vans with a vehicle length of 5427mm / 213.7".
Load-carrying area: 2974mm (117.1") L x 1565mm (61.6") W.
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 35.35kg (78lbs)
Front Runner
FRONT RUNNER Suzuki Fronx (2023-Current) Slimline Ii Roof Rack Kit - KRSF006T
$1,389.60
$1,544.00
Get your Suzuki Fronx geared-up for all types of adventures with the proven tough Slimline II Roof Rack Kit. This modular rack has 55+ available accessories, so transporting cargo, bicycles, kayaks, camping, or overland gear will be a breeze. Front Runner's popular Under Rack Table can be fitted to this rack so you can picnic wherever you stop.
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Suzuki Fronx. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSF006T - Suzuki Fronx (2023 - Current) Slimline II Roof Rack
Consisting of:
1x FASF001 - Suzuki Fronx (2023 - Current) Foot Rails
1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.14kg (51.01lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 595mm (23")
Length: 1720mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 29kg (64lbs)
Front Runner
FRONT RUNNER Telescopic Ladder Support Bracket/Slimline Ii Rack - RRAC064
$18.00
$20.00
A pair of brackets that secure onto the Slimline II rack and allows a Aluminium Telescopic Ladder / 2.9m to rest securely against the rack.
These brackets prevent the ladder from sliding sideways, offering a safe foothold when climbing onto your rack.
Note: These Telescopic Brackets are compatible with the Slimline II Rack. For Slimsport and Slimpro Van Rack please use Telescopic Ladder Support Bracket / Slimsport & Slimpro Van Racks.
Features
Consists of:
2x Ladder brackets
Installation hardware kit
Material used:
Black powder-coated high strength steel
Product dimensions:
L 50mm (2") x W 60mm (2.4") x H 15mm (0.6")
Weight:
0.1kg (0.2lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Hilux Revo Extra Cab 2016-On - KRTH019T
$1,107.00
$1,230.00
This 954mm/37.6" long, full-size, Slimline II Roof Rack Kit contains the Slimline II Tray, Wind Deflector, two (2) Tracks, and four (4) Feet to mount the Slimline II Tray to your 2016-Current Toyota Hilux Revo Extra Cab.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty.*
Note: Drilling is required for installation.
Features
KRTH019T - Toyota Hilux Revo Extra Cab (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FASS012 - Foot Set / 40mm - 50mm
1x FASS015 - Foot Set Angled / 75mm
1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
1x TRTH007 - Toyota Revo Extra Cab (2016-Current) Tracks
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 20.25kg (44.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 22kg (48lbs)
Front Runner
FRONT RUNNER Double Rear Seat Vehicle Safe Fits Toyota Hilux Xtra Cab 2012 - SAFE007
$404.10
$449.00
All vehicle based adventures require you to carry valuables. Dont leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft.
The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor on both the driver side and the passenger side, yet is still easily accessible.
Manufactured with black powder coated 14 gauge, thick steel.
Designed and built in South Africa - a country where crime deterrence is an art form.
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Quantum Low Roof 2004-On - KRTQ005L
$2,727.00
$3,030.00
This 2272mm/89.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Quantum/HiAce Low Roof contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTQ005L - Toyota Quantum Low Roof (2004-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 43kg (94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 620mm (24")
Length 1635mm (64")
Height 160mm (6")
Shipping Weight:
Weight 49.7kg (109.3lbs)
Front Runner
FRONT RUNNER Ute Bed Load Bar Kit / 1425Mm(W) - KRLB024
$633.60
$704.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your truck. This low profile solution includes 4 Load Bed Leg Mounts, 2 1475mm Load Bars that fit into the included tracks of your Pickup.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder-coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Features
KRLB024 - Pickup Truck Bed Load Bar Kit / 1425mm(W) - by Front Runner
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)
1x LBSK016 - Roof Load Bar Pair 1425mm(W)
1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 10.48kg (23.1lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, or Grab-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 135mm (5")
Length: 1525mm (60")
Height: 310mm (12")
Shipping Weight:
Weight: 10kg (22lbs)
Front Runner
FRONT RUNNER Ute Canopy/Trailer Slimline Ii Rack Kit 1425Mm X 954Mm - KRCAT54T
$1,233.90
$1,371.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 954mm/37.6" (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 1150mm/45.3” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit
Consisting of:2x FASS025 - Foot Set / 70mm - 80mm1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)1x TRCA003 - Canopy Tracks / 1150mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 21.33kg (47.02lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 25.8kg (57lbs)
Front Runner
FRONT RUNNER Ute Canopy/Trailer With Oem Track Slimline Ii Rack Kit 1255Mm X 2368Mm - KRCAT37TN
$1,994.40
$2,216.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4" (W) x 2368mm/93.2" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTD12 - Slimline II Tray - 1255mm(W) X 2368mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 31kg (69lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1255mm (49")Length 2368mm (93")Height 70mm (3")Shipping Weight:
Weight 36.4kg (80.1lbs)
Front Runner
FRONT RUNNER Ute Canopy/Trailer With Oem Track Slimline Ii Rack Kit 1345Mm X 1762Mm - KRCAT46TN
$1,638.90
$1,821.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 1762mm/69.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTG09 - Slimline II Tray - 1345mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1345mm (53")Length 1762mm (69")Height 70mm (3")
Shipping Weight:
Weight 30.4kg (66.8lbs)
Front Runner
FRONT RUNNER Ute Canopy/Trailer With Oem Track Slimline Ii Rack Kit 1345Mm X 1964Mm - KRCAT47TN
$1,818.00
$2,020.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 1964mm/77.3" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 29kg (63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1345mm (53")Length 1964mm (77")Height 70mm (3")
Shipping Weight:
Weight 33.4kg (73.4lbs)
Front Runner
FRONT RUNNER Ute Load Bed Slimline Ii Rack Kit / 1255Mm(W) X 1358Mm(L) - KRLB001T
$1,525.50
$1,695.00
This kit creates a full size rack that sits above your Pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1358mm), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRLB001T - Pickup Truck Load Bed Slimline II Rack Kit / 1255mm(W) x 1358mm(L) - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.1lbs)
Front Runner
FRONT RUNNER Ute Roll Top Slimline Ii Load Bed Rack Kit 1425 X 1560 Tall - KRRT025T
$1,818.90
$2,021.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1560mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT025T - Pickup Roll Top Slimline II Load Bed Rack Kit / 1425(W) x 1560(L) / Tall - by Front Runner
Consisting of:
3 x LASS033 - Pick Up Roll Top Leg Mount / Medium (Pair)
1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.0kg (70.5lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1730mm (68.0")
Height: 240mm (9.0")
Shipping Weight:
32.6kg (72.0lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser Dc Ute Slimline Ii Roof Rack Kit - KRTL022L
$1,588.50
$1,765.00
This 1358mm/53.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Land Cruiser DC contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL022L - Toyota Land Cruiser 79 DC Pick-Up Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.3kg (66.5lbs)
Front Runner
FRONT RUNNER Egr Rolltrac Slimline Ii Load Bed Rack Kit Fits Vw Volkswagen Amarok 2010-On - KRRT043T
$1,716.30
$1,907.00
This kit creates a full-size rack that sits above your Volkswagen Amarok's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT043T - Volkswagen Amarok (2010-Current) EGR RollTrac Slimline II Load Bed Rack Kit
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.46kg (67.15lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 31kg (68lbs)
Front Runner
FRONT RUNNER Slimsport Roof Rack Kit Fits Vw Volkswagen Amarok 2023-On - KSVA001T
$974.70
$1,083.00
This low-profile flat deck Slimsport rack has a load-carrying area of 1468mm (57.8") x 1233mm (48.5").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSVA001T - Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSFR005 - Ford Ranger T6 Double Cab (22-Cur)Ssport RR K
1x RRAC251 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt WF
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Tray Dimensions:
1468mm (57.8") L x 1233mm (48.5") W x 139mm (5.5") H
Approximate Installed Weight: 20.74kg (45.72lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 210mm (8")
Shipping Weight:
Weight: 27.86kg (61lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Kit Fits Vw Crafter L3H2/ Mwb/Oem Track 2017-On - KVVC005T
$2,114.10
$2,349.00
Improve your Volkswagen Crafter's carrying capabilities with the lightweight and low-profile Slimpro Van Rack Kit. It does not matter if you use your Crafter for work or weekend play, this rack kit is versatile for the Jack of any trade with 55+ available rack accessories. This rack can easily be configured for work, camping and adventure equipment, or sports gear and accessories.
Compatible with the Volkswagen Crafter (L3H2/ MWB/OEM Track) (2017-Current) vans with an OEM Track with a vehicle length of 5986mm / 235.7".
Load-carrying area: 3928mm (154.6") x 1456mm (57.3").
Twelve (12) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 116mm (4.6") height, or left in standard configuration at 158mm (6.2").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVVC005T - Volkswagen Crafter (L3H2/ MWB/OEM Track) (2017-Current) Slimpro Van Rack Kit
Consisting of:
6x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1345 - Narrow Slat / 1345mm (Pair)
2x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
3180mm (125.2") L x 1460mm (57.5") W x 85mm (3.4") H
Approximate Installed Weight: 32kg (70.55lbs)
Volkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 190mm (7")
Shipping Weight:
Weight: 38kg (84lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Kit Fits Vw Crafter L5H2/ Lwb Maxi/Standard Roof 2017-On - KVVC003T
$2,976.30
$3,307.00
Compatible with Volkswagen Crafter (L5H2/ LWB Maxi) (2017-Current) standard roof vans with a vehicle length of 7391mm / 291".
Load-carrying area: 4534mm (178.5") x 1456mm (57.3").
Fourteen (14) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 116mm (4.6") height, or left in standard configuration at 158mm (6.2").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVVC003T - Volkswagen Crafter (L5H2/ LWB Maxi/Standard Roof) (2017-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
1x BOXT114 - Tray Box MKII Top
1x BOXT115 - Tray Box MKII Bottom
1x BOXT116 - Tray Box MKII Combined Inner
6x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm
1x FAVF006 - Volkswagen Crafter Van Rack Foot Set / 90mm
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
6x RRNS1345 - Narrow Slat / 1345mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
2x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
4534mm (178.5") L x 1456mm (57.3") W x 158mm (6.2")
Approximate Installed Weight: 51.14kg (112.74lbs)
Volkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 51.35kg (113lbs)
Front Runner
FRONT RUNNER Ram Pro Master 2500 (136 Wb/Low Roof) (2014-Current) Slimpro Van Rack Kit - KVRP004T
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for RAM Pro Master vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with RAM Pro Master 2500 (136” WB) (2014-Current) Low Roof vans with a vehicle length of 5427mm / 213.7".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 190mm (7")Shipping Weight:Weight: 36.35kg (80lbs)
Front Runner
FRONT RUNNER Ram Pro Master 2500 (136 Wb/High Roof) (2014-Current) Slimpro Van Rack Kit - KVRP005T
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for RAM Pro Master vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with RAM Pro Master 2500 (136” WB) (2014-Current) high roof vans with a vehicle length of 5427mm / 213.7".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.95kg (81lbs)
Front Runner
FRONT RUNNER Jeep Wrangler Jl 4 Door Sky One-Touch Extreme Slimline Ii Roof Rack Kit - KRJW040T
$1,840.50
$2,045.00
This Slimline II 1/2 rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 4 door 2007-2018 including the Slimline II Tray (1425mm x 1358mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This sophisticated, rugged, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components and hardware needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The Front Runner JK Extreme mounting system is secured to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight or stress on the hardtop itself.
Features
KRJW004T - Jeep Wrangler JK 4 Door (2007-2018) Extreme Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FAJK007 - Jeep Wrangler JK 4 Door Inner Brackets - by Front Runner
1 x FAJK008 - Jeep Wrangler JK 4 Door Foot Rails - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 31kg (69lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 315mm (12")
Shipping Weight:
Weight 36.5kg (80.3lbs)
Front Runner
FRONT RUNNER Jeep Wrangler Jl 4 Door (2018-Current) Slimline Ii 1/2 Roof Rack Kit / Tall - KRJW032T
$1,756.80
$1,952.00
This 1358mm/53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit for your Jeep Wrangler JL 4 Door contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for 4xe models. Kits for the Mojave and diesel models are available:
Jeep Wrangler JL 2Door Mojave/Diesel (2018-Current) Extreme Slimline II Roof Rack Kit
Jeep Wrangler JL 4Door Mojave/Diesel (2018-Current) Extreme Slimline II Roof Rack Kit
Jeep Gladiator JT Mojave/Diesel (2019-Current) Extreme Slimline II Roof Rack Kit
Features
KRJW032T - Jeep Wrangler JL 4 Door (2018-Current) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner
Consisting of:
1x LASS027 - Leg Spacer 6mm (Pair)4x LASS036 - Jeep JL/JT Mounting Leg / 170mm (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.7kg (72.09lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 260mm (10")
Shipping Weight:
Weight: 32kg (70lbs)
Optima
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA
$379.00
$600.00
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA (Free Postage)
The Yellow Top battery is the result of four decades of technological innovation and engineering. Like Optima's Red Top and Blue Top batteries, the battery features Optima's "Six Pack." The AGM design features spiral cells filled with highly absorbent, fine fiberglass mats.
Handles Heavy Loads
The Yellow Top battery delivers vital power when there are high electrical loads. Sometimes, demand exceeds alternator capacity. It's an excellent choice for vehicles loaded with accessories. For example, the Yellow Top delivers the power needed to meet the demands of an aftermarket audio system with extra amplifiers. When there's a substantial draw of electrical current, the Optima Yellow Top delivers the superior performance you need. Heavy loads often deplete traditional flooded lead-acid batteries to the point that they never recover.
You can also count on the Yellow Top battery to meet regular starting and operational needs.
Excellent No-alternator Solution
The deep-cycle battery is the perfect choice when there is no alternator. For example, competitive racers love the Yellow Top. They use it in ultra-lightweight hill-climb cars, drag cars and motorkhana specials. Also, the Yellow Top is up to 15 times more resistant to vibration than traditional flooded designs. This is a big plus in typical racing conditions. Extreme enthusiasts trust the Yellow Top when a power failure is not an option.
This deep-cycle design offers other important advantages. Count on the Yellow Top to perform across the wide range of Australia's weather extremes. Enjoy the superior performance you require during winters in Melbourne and summers in Sydney.
The Yellow Top battery delivers up to three times the battery life of certain competitors. The maintenance-free design is good for more than 300 discharge and recharge cycles. Better yet, the AGM design is virtually spill-proof. It is possible to mount the Yellow Top in almost any position.
Invest in the Yellow Top, a high-performing AGM battery from Optima, an industry leader in advanced battery technology. Its best-in-class material purity outperforms competing lead alloy models.
The Yellow Top deep-cycle battery delivers reliable power every day and everywhere.
Features
Voltage: 12v
Terminal: SAE
Assembly: LHP
CCA 750
AH 55
L 254 x W 173 x H 199 mm
Deep-cycle and cranking power
Up to 3X longer life
15 times more vibration-resistant
Virtually spillproof
Mountable in virtually any position
Maintenance-free
Faster recharging
Optimal starting power
300+ discharge/recharge cycles
8012-254
TJM
TJM Awning To Suit Allora Rtt - 620ALYRTTAWN (Pick up Only)
$269.01
The TJM Awning is a perfect match for the Allora Aluminium Rooftop Tent, designed to bring added comfort and protection on your outdoor adventures. Constructed from durable 420D Oxford Polyester Fabric, this awning boasts a water column rating of 3000mm, ensuring reliable water resistance even in unpredictable weather. Quick and easy to set up, it offers ample shade, making it ideal for relaxing, or staying dry during unexpected showers. Enhance your rooftop tent experience with the TJM Awning—built tough for the great outdoors.
Specifications
Compatible:
TJM Allora Aluminium Roof Top Tent
Shade Coverage:
Provides up to 7.5m2 of shade
Material:
420D polyester Oxford fabric with 3000mm PU waterproof rating, UPF 50+
Parts Included:
Awning, aluminium telescopic tent poles, ground pegs, guy ropes, and storage bags
Package Weight:
6.50 kg
TJM
TJM Wireless 8 Gang Switch Panel Controller - 032TJM8WSPC
$259.00
Take control of your off-road setup with the ultimate 8-gang wireless switch controller from TJM. Designed for explorers who demand precision and power, this controller lets you command your 4x4’s accessories from up to 60m away. With customizable backlighting, 3 switch modes, and a140 interchangeable legends, you’ll have total control over your adventure. Quick to recharge, ruggedly built, and powerful enough for any job - this isn’t just a controller, it’s your key to freedom. Take The Lead.
Voltage: 12V/24V DCPower Capacity: 720W @ 12V DC, 1920W @ 24V DCMaximum Current: 60 amp (Combined Total)Standby Power: <3mAPower Source: 3.7V Dc Lithium 1000 mAhFrequency: 433MhzCharge Time: 2-3 hrsCertification: CE, EMC, RoHSDimensions: 127 x 69 x 14mm (Controller), 192 x 135 x 36mm (Control Box)Weight: 160grams (Controller), 570grams (Control Box)Package Weight: 2.18 kg
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
TJM
TJM Compressor Bundle - TJMCOMPRESSORBUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
