Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look. A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Note: Does not work on models without a sunroof. Please contact our help center if you are unsure. Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H Weight:4.02kg (8.9lbs)

Elevate your snack or drink stops when adventuring in your vehicle with this Universal Drop Down Tailgate Table. Incredibly, it can be fitted onto any flat surface, providing a handy, on-the-go workspace. Perfect for putting the kettle, cups, glasses, or snacks on. This Universal Drop Down Table will fit on any flat surface equal to, or larger than: 640mm/25.2" W x 330mm/13" H. It is a universal drop down table features a large working surface of 615mm/24.2" W x 257mm/10.1" L, perfect for small cooking appliances, kettle/coffee station.  Stores neatly at 64mm/2.5" when closed. The Universal Drop Down Table lowers to open at 90 degrees from the mounted base.  The table latch features a hole to securely lock the drawer in place, Rack Accessory Lock / Small can be used. *Sold Separately   Maximum load: 20Kg (44.1lbs). Drilling is required for installation. Installation hardware and fitment guide included.  Consists of:1 x Table Assembly1 x Catch Assembly2 x Arm Assembly2 x Mounting Bracket (1 Left Hand side & 1 Right Hand side)Installation HardwareFitting Instructions Product Dimensions:Closed Dimensions:64mm (2.5") L x 636mm (25.03") W x 320mm (12.60") H Fully Opened Dimensions:264mm (10.4") L x 636mm (25.03") W x 320mm (12.60") H Weight:3.2kg (7.05lbs) Load Rating:20kg (44.1lbs)

The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts

  A bracket set that attaches to the side profile of your Slimline II or Slimpro Van Roof Rack. Adjustable to suit all vehicle types and load beds. Mounts your Rack Ladder to these brackets to access the roof of your vehicle. These brackets can be left on your rack without being obtrusive. Made from high-grade steel and powder coated with the same durable all-weather epoxy powder coating as the Front Runner racks. Features Consists of: 1 x Pair of Ladder Side Mount Brackets Installation Hardware Fitting Instructions Materials used: Black powder coated high strength steel Product Dimensions: 182mm (7.2") L x 87mm (3.4") W x 397mm (15.6") H Weight: 3kg(6.6lbs)

SUITS: All MSA 4X4 Storage Drawers Fits snuggly into a MSA 4X4 Storage Drawer System FEATURES: CONTENTS 1 x 600ml Thermo Coffee Plunger 2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation 2 x 500ml Storage Canisters for coffee, sugar or creamer 1 x 30ml Coffee Measuring Spoon 2 x MSA 4X4 Branded Teaspoons Mirco Fibre Cleaning Cloth STORAGE BAG Spill and water-resistant high quality Hypalon exterior and PVC interior Carrying handle Zip with double MSA 4X4 branded zip pulls INCLUDES: 2 Year Manufacturer’s Warranty on all items Care and safety document (Coffee beans NOT included)

SUITS: All MSA 4X4 Storage Drawers Fits snuggly into a MSA 4X4 Storage Drawer System FEATURES: CONTENTS 1 x 600ml Thermo Coffee Plunger 2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation 2 x 500ml Storage Canisters for coffee, sugar or creamer 1 x 30ml Coffee Measuring Spoon 2 x MSA 4X4 Branded Teaspoons Mirco Fibre Cleaning Cloth STORAGE BAG Spill and water-resistant high quality Hypalon exterior and PVC interior Carrying handle Zip with double MSA 4X4 branded zip pulls INCLUDES: 2 Year Manufacturer’s Warranty on all items Care and safety document (Coffee beans NOT included)

Free up rack space and mount fuel and water to the side or top of a Slimline II Rack. The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack. The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96")) and tilt (12.5 degree increments up to 25 degrees) adjustable. Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle. Rotopax Rack Mounting Plate measures in at 480mm (18.9") L x 250mm (9.8") W x 20mm (0.8") H, weighs 1,58kg (3.5lbs). Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack. Installation hardware and fitting instructions included. PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY. Features Consists of: 1 x RotoPax Mounting Plate (RRAC105) 1 x Pair of RotoPax Side Mount Brackets Installation Hardware Fitting Instructions Materials used: Black powder coated high strength steel Product Dimensions: 97mm (3.8") L x 480mm (18.9") W x 243mm (9.6") H Weight: 2.88kg (6.4lbs)

Make a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing for Low Profile rack kits. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds. Get a bold new overlanding look in minutes. Create a solid appearance by covering the gap from roof to rack. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. Easily secures to your roof rack in three simple steps. Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust. Consists of:1 x Wind Fairing4 x Brackets1 x Rubber BladeInstallation HardwareFitting instructions Materials used:Black powder coated aluminumEPDM Rubber Product Dimensions:1087mm(42.8") L x 2mm(0.1") W x 127mm(5") H Weight:1.5kg (3.3lbs)

This battery bracket allows you to fit an additional battery to your vehicle by mounting as an additional bracket under your vehicle's hood. Includes all fitment parts. Made out of black powder coated high strength steel. Fits Right Hand Drive vehicles. NOTE: Not suitable for models fitted with an Auxiliary heater.

A durable replacement tent cover for the Front Runner Roof Top Tent. Made from 1000D PVC. Features Material used: 1000D PVC Product Dimensions: 1320mm (52.0") L x 1220mm (48") W x 330mm (13") H Weight: 3.08kg (6.8lbs) Color: Black

A durable tent cover made from 1000D PVC protects your tent when not in use. Features Material used: 1000D PVC Product Dimensions: 1255mm (49.4") L x 1355mm (53.3") W x 310mm (12.2") H Weight: 3.08kg (8.4lbs) Color: Tan

A must-have for anyone who owns a Roof Top Tent, our Quick Release Tent Mount Kit allows you to mount and remove it in seconds without any tools. This makes it ideal for those puzzled about garage clearance or who’d prefer not to be driving around with their roof top tents during the workweek. The four lockable latches provide an off-road tough, rattle-free mounting system that is compatible with various soft- and hard-shell rooftop tents. Consists of:4 x Quick Release BracketsInstallation HardwareFitting Instructions Materials used:Black powder coated steel304 Stainless steel Product Dimensions: (Per assembled bracket)131mm (5.2") L x 142mm (5.6") W x 60mm (2.4") H Weight:6.6kg (14.6lbs)

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" separate silk dome tweeter serves up all the high-frequency detail you've been missing with factory sound. Because tweeters can be challenging to install, Alpine provides in-line crossovers and a threaded removable housing to make sure you have what you need to make them sound their best. Grilles are not included; the factory grilles should be suitable for most applications. Product highlights: 2-way component speaker system 4" polypropylene/glass fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation handles up to 45 watts RMS (140 watts peak power) sensitivity: 86 dB frequency range: 97-40,000 Hz warranty: 1 year MFR # S2-S40C Item # 500S2S40C What's in the box: 2 Woofers Two 4x6 Adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Flat mounting flanges (used in some factory applications) 2 Foam self-adhesive pads 2 Foam self-adhesive rings Ten 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive backed gaskets Warranty information On-line product registration information Important Notice sheet Declaration of conformity Templates and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers. Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations. Product highlights: 6"x9" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 1" silk dome tweeter handles up to 85 watts RMS (260 watts peak power) frequency response: 55-40,000 Hz sensitivity: 90 dB grilles not included warranty: 1 year MFR # S2-S69 Item # 500S2S69 What's in the box: Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/8" Screws Eight M4x60mm Machine screws (each screw has a lock washer attached) Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Spacers Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

The all-new UTE-73EBT delivers full control and connectivity of all your favourite digital media sources. Connect a USB to play MP3/WMA/AAC and high-resolution FLAC files or plug in your iPod/iPhone for quick access to your music library. Featuring the latest Android Open Accessory 2.2 (AOA 2.0) technology provides control of compatible music apps installed on an Android smartphone via USB. Equipped with built-in Bluetooth, you can enjoy the convenience of hands-free calling, wireless audio streaming, full phonebook access and voice control with compatible phones. What’s more, the inclusion of a front AUX input provides easy connection of virtually any portable music device. Features 4 x 50W High Power Amp Mech-less Design Built-in Bluetooth Audio Streaming Handsfree Phone Calls and Voice Control Front Panel USB and Aux Inputs Made for iPod and iPhone AOA 2.0 (Android Open Accessory) MP3/WMA/AAC/FLAC Playback from USB 3-Band Parametric EQ 2 Pre-outs (2 Volt)  RGB Variable Illumination BassEngine SQ & MediaXpander 24-Bit DAC Steering Remote Control Ready Remote Included Specifications AUDIO Preset EQ 10 types P-EQ 3 Band Media Expander (MX) High Pass filter (HPF) Low Pass filter (LPF) Pre-out: 2 Way Pre-out voltage 2 voltage Subwoofer level USB TAG display USB support file: MP3, WMA, AAC, FLAC BASS ENGINE SQ Pattern Standard (comes with the unit) Punch Rich Mid Bass Low Bass Bass Engine SQ 6 level Illumination blink on Bass Engine SQ mode TUNER Preset station: FM 2 x 6 stations AM 1 x 6 stations Local/ DX selectable Channel EQ iPod Search Playlist Artist Album Song Podcast Genre Composer Audiobook Alphabet Search BLUETOOTH AUDIO Play / Pause button support Forward/Backward Folder up /down Music search BLUETOOTH HFP Auto-connect Phonebook alphabet Search Phone battery level indicator Phone signal strength indicator Max paring device: 5 Devices Max phonebook number: 1000 contracts Voice dial Preset dial Speaker selectable Switch HU⇔Mobile phone Phone list

The Front Runner Tracks have been designed to accommodate a stud plate which slides into the t-slotted track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot. Made from t-slotted aluminum extrusion. Often used for trailers and canopies to mount a rack or load bars. Each track is supplied with fitted double sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track. Powder coated black. Comes in pairs. Features TRAC002 - Universal Track / 1400mm(L) - by Front Runner Consisting of: 1 x TRAC002 - Universal Track / 1400mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium Approximate Installed Weight 3kg (6lbs)   Shipping Dimensions: Width 112mm (4") Length 1410mm (56") Height 112mm (4") Shipping Weight: Weight 3.3kg (7.3lbs)

Secure your bicycle on the side your Front Runner Load Bed Rack Kit with this adjustable Bike Carrier / Load Bed Rack Side Mount without using up any rack space. Works with Pro Fork Mount Bike Carrier / Power Edition or Pro Thru Axle Bike Carrier / Power Edition*. The pair of brackets can be installed on the Left-hand or Right-hand side of the Front Runner Rack using the rack slats and rack legs to provide a secure ledge to mount your Front Runner Bike mount (Pro Fork Mount Bike Carrier / Power Edition OR Pro Thru Axle Bike Carrier / Power Edition)*. Adjustable to fit all bicycle sizes with the included extension plate. *Note: Pro Fork Mount Bike Carrier / Power Edition or Pro Thru Axle Bike Carrier / Power Edition Sold Separately Features Consists of: 2 x Top Mounts Plates 2 x Bottom Mount Plates 2 x Leg Clamps 1 x Extension Plate Installation Hardware Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 276mm (10.9") L x 186mm (7.3") W x 170mm (7") H Weight: 3.7kg (8.2lbs)