Front Runner
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 5'7In (2009-Current) Slimline Ii Load Bed Rack Kit - KRDR019T
$1,959.30
$2,177.00
This kit creates a full-size rack that sits above your Ram 1500/2500/3500s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR019T - Ram 1500/2500/3500 ReTrax XR 5'7" (2009-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.68kg (72.05lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 34kg (75lb)
Front Runner
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 5'7In (2009-Current) Triple Load Bar Kit - KRDR022
$865.80
$962.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR022 - Ram 1500/2500/3500 ReTrax XR (2009-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x LBSK019 - Roof Load Bar Set 1575mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 9kg (19.84lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6")
Length: 1690mm (67")
Height: 150mm (6")
Shipping Weight:
Weight: 10kg (22lbs)
Front Runner
FRONT RUNNER Ram 1500/2500/3500 Retrax Xr 6'4In (2003-Current) Slimline Ii Load Bed Rack Kit - KRDR020T
$2,216.70
$2,463.00
This kit creates a full-size rack that sits above your Ram 1500/2500/3500s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRDR020T - Ram 1500/2500/3500 ReTrax XR 6'4" (2003-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS027 - Leg Spacer 6mm (Pair)
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.79kg (78.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 37kg (81lbs)
Front Runner
FRONT RUNNER Dometic Hydration Water Jug 11L/2.9Gal Rack Bracket - KRDR021T
$2,842.20
$3,158.00
Double up the loading space on your Ram 1500/2500/3500 with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ram 1500/2500/3500.
This kit creates a full-size rack that sits above your Ram 1500/2500/3500’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 2368mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:4x LASS027 - Leg Spacer 6mm (Pair)4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP12 - SLII Tray - 1575mm(W)X2368mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 44.65kg (98.44lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 46kg (101lbs)
Front Runner
FRONT RUNNER Ram Pro Master 3500 (136 Wb/High Roof) (2014-Current) Slimpro Van Rack Kit - KVRP008T
$2,173.50
$2,415.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1345mm (53") W x 63mm (2.5") H Weight:4.38 kg (9.7 lbs)
Front Runner
FRONT RUNNER Ram Pro Master 3500 (159 Wb/Ext High Roof) (2014-Current) Slimpro Van Rack Kit - KVRP009T
$2,837.70
$3,153.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1358mm (53.5") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:4.5 kg (9.9 lbs)
Front Runner
FRONT RUNNER Ram W/ Rambox (2009-Current) Slimline Ii 5'7In Bed Rack Kit - KRDR022T
$1,561.50
$1,735.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1475mm (58.1") W x 63mm (2.5") H Weight:4.57 kg (10.1 lbs)
Front Runner
FRONT RUNNER Ratcheting Spade/Shovel And Paddle Mount - RRAC024
$85.50
$95.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:4.76 kg (10.5 lbs)
Front Runner
FRONT RUNNER Recovery Device And Gear Holding Side Brackets - RRAC103
$215.10
$239.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1345mm (53") W x 63mm (2.5") H
Weight:4.88 kg (10.8 lbs)
Front Runner
FRONT RUNNER Recovery Device Mounting Kit - RRAC147
$250.20
$278.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:5 kg (11 lbs)
Front Runner
FRONT RUNNER Rivian R1S (2022-Current) Slimline Ii Roof Rack Kit - KRRR013T
$2,360.70
$2,623.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1475mm (58.1") W x 63mm (2.5") H
Weight:5.07 kg (11.2 lbs)
Front Runner
FRONT RUNNER Rivian R1T (2022-Current) Slimline Ii Load Bed Rack Kit - KRRR014T
$1,993.50
$2,215.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (69.4") L x 1165mm (45.9") W x 63mm (2.5") H
Weight:4.92 kg (10.9 lbs)
Front Runner
FRONT RUNNER Rivian R1T (2022-Current) Slimline Ii Roof Rack Kit - KRRR012T
$1,708.20
$1,898.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (61.4") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:5.05 kg (11.1 lbs)
Front Runner
FRONT RUNNER Rivnut Tool / M6/M8 - VACC016
$29.70
$33.00
Use this tool to insert M6 and M8 rivnuts.
Front Runner
FRONT RUNNER Roof Rack Power Point - RRAC165
$61.20
$68.00
This power point bolts underneath any slat in the front, on the side, or at the rear of your Roof Rack.
Powered by Hella Extension Cord - 3m/10' power cord from your vehicles 12V accessory outlet.
Made from steel and sealed with the same durable, weather rated powder coating as the Front Runner Roof Racks.
Power additional lights such as, 4" LED Light Cube MX85-WD / 12V / Wide Beam or 4" LED Light Cube MX85-SP / 12V / Spot Beam.
Comes with power inlet and outlet to power light and additional 12V accessories simultaneously.
*Note: The Hella Extension Cord - 3m/10' power cord and 4" LED Light Cube MX85-WD / 12V / Wide Beam or 4" LED Light Cube MX85-SP / 12V / Spot Beam are sold separately.
Features
Consists of:
1 x Cover
2 x Female Hella Plugs
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
72mm (2.8") L x 112mm (4.4") W x 50mm (2") H
Weight:
300g (10.6oz)
Front Runner
FRONT RUNNER Roof Rack Spotlight Bracket - RRAC022
$59.40
$66.00
Strong Multi-function brackets, perfect for mounting spotlights or antenna brackets.
Position them anywhere along the T-slots on the front, rear or side of your Slimline II roof rack.
The dual mounting points drastically reduce vibration, extending the life of your mounted electrical accessories.
Can also be mounted upside down, if needed.
Made from stainless steel and features same black powder coating as Front Runner roof racks.
Compatible with the original Slimline Roof Rack, but drilling in to the rack is required.
Sold in pairs.
Features
Consists of:
2 x Adjustable Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated corrosion resistant steel
Product Dimensions:
80mm (3.2") L x 61mm (2.4") W x 66mm (2.6") H (Single Bracket)
Weight:
210g (7.4oz) (Pair)
Front Runner
FRONT RUNNER Roof Top Tent - TENT031 (In Store Pick-Up Only)
$1,255.50
$1,395.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1964mm (77.3") L x 1165mm (45.9") W x 63mm (2.5") H
Weight:5.17 kg (11.4 lbs)
Front Runner
FRONT RUNNER Roof Top Tent Annex - TENT032 (In Store Pick-Up Only)
$447.30
$497.00
Even adventurers need privacy sometimes and this annex provides a convenient private space for a shower, toilet, changing room, additional sleeping space, or even as walls for a kitchen set up.
Zippered fabric flaps on both the inside and outside of the screen windows give privacy and protection from the elements.
Entry into the Annex is via the right-hand side to avoid the ladder of the Roof Top Tent.
The zippered screen door also has a Velcro fabric cover for privacy and rain protection.
The back of the annex features a zippered door for easy entry into a vehicle door; perfect for accessing luggage while changing.
If your rooftop tent is positioned to overhang the back of your vehicle, the rear top-down zippered door allows access to your tailgate / load bed.
Walls can be secured to the ground using the supplied stakes.
Made of the same lightweight, breathable and waterproof tent fabric as the Roof Top Tent.
Stores compact in a matching cinch tie / drawstring bag.
Features a removable, zip-off waterproof flooring ideal when making an added sleeping room.
*Note: Product Desgin and Color may differ from product images.
Features
Consists of:
1 x Roof Top Tent Annex
1 x Zippered Floor
Overall Product Dimensions:
600mm (23.6") L x 175mm (6.9") W x 185mm (7.3") H
Opened Dimensions:
Base of the Roof Top Tent:
1219mm (48") L x 1295mm (51") W
Dimensions on the Ground:
Approx. 1524mm (60") L x 1600mm (63") W
Maximum Opened Length:
2286mm (90")
Weight:
3.77kg (8.3lbs)
Front Runner
FRONT RUNNER Roof Top Tent Cover / Black - TENT063 (In Store Pick-Up Only)
$199.80
$222.00
A durable replacement tent cover for the Front Runner Roof Top Tent.
Made from 1000D PVC.
Features
Material used:
1000D PVC
Product Dimensions:
1320mm (52.0") L x 1220mm (48") W x 330mm (13") H
Weight:
3.08kg (6.8lbs)
Color:
Black
Front Runner
FRONT RUNNER Rotopax Rack Mounting Plate - RRAC157
$98.10
$109.00
A high strength steel plate to mount either one (1) 15L/4 gallon, one (1) 17L/4.5gallon or two (2) 7.5L/2 gallon RotoPax fuel or water cans.
Secures to the top slats of the Front Runner Rack.
The original RotoPax RX-PM Pack mounts must be used together with the mounting plate to secure the cans (RX-PM sold separately).
Finished in the same durable, weather-resistant black powder coating as the Front Runner Rack.
Features
Consists of:
1 x Mounting Plate
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
480mm (18.9") L x 248mm (9.8") W x 18mm (0.7") H
Weight:
1.9kg (4.2lbs)
Front Runner
FRONT RUNNER Rotopax Side And Top Mount Kit - RRAC112
$206.10
$229.00
Free up rack space and mount fuel and water to the side or top of a Slimline II Rack.
The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack.
The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96")) and tilt (12.5 degree increments up to 25 degrees) adjustable.
Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle.
Rotopax Rack Mounting Plate measures in at 480mm (18.9") L x 250mm (9.8") W x 20mm (0.8") H, weighs 1,58kg (3.5lbs).
Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack.
Installation hardware and fitting instructions included.
PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.
Features
Consists of:
1 x RotoPax Mounting Plate (RRAC105)
1 x Pair of RotoPax Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
97mm (3.8") L x 480mm (18.9") W x 243mm (9.6") H
Weight:
2.88kg (6.4lbs)
Front Runner
FRONT RUNNER Sand Trax Mat - REQU042
$78.00
$87.00
A Sand Trax mat to help with off-road hindrances like sand, mud or sharp rocks.
Consists of:1 x Sand Trax MatMaterials used:Rubber stripsSteel cableProduct Dimensions:1500mm (59.1") L x 220mm W (8.7")Weight:7.64kg (16.8lbs)Special NotesSKU;RTSANDTRAX
Front Runner
FRONT RUNNER Shoe Bag For Roof Top Tent - TENT085
$30.60
$34.00
A 7 (seven) step replacement ladder for your Roof Top Tent incase the original ladder gets damaged or lost.
Retractable, for easy storage.
Made from sturdy aluminium.
Foot friendly steps.
Weight limit: 180kg/400Lbs.
NOTE: Should the tent install height be higher than 2 meters you will need a Tent Extension Ladder.
Features
Materials used:
Extruded aluminium
Stainless steel
Nylon-6
Product Dimensions:
1150mm (45.3") L x 350mm (13.8") W x 90mm (3.5") H
Open Dimensions:
2055mm (80.9") L x 350mm (13.8") W x 90mm (3.5") H
Front Runner
FRONT RUNNER Shower Cubicle Curtain / Caddy - SHOW013
$49.50
$55.00
A privacy curtain and shower caddy to use with the Rack Mount Shower Cubicle.
Easily connects to your Front Runner Rack with two carabiner clips.
The shower caddy has 3 storage compartments.
Stores away inside your Shower Curtain Storage Bag.
Features
Consists of:
1 x Shower Caddy
Installation Hardware
Fitting Instructions
Materials used:
240gsm Ripstop, UV and mold resistant fabric
Product Dimensions:
1000mm (39.4") L x 1200 (47.2") W x 10mm (0.4") D (When hang on vehicle)
Weight:
0.61kg (1.4lbs)
Front Runner
FRONT RUNNER Slimline Ii Universal Accessory Side Mounting Brackets - RRAC031
$51.30
$57.00
Universal brackets that fit onto the Front Runner Slimline II Roof Rack's side profile, allowing you to mount accessories to your roof rack without having to drill into it.
Features
Consists of:
Comes in a set of (3) three brackets with pre-cut mounting holes. Washers, bolts and nuts included.
Materials used:
Black powder coated steel.
Product Dimensions:
L 115mm (4.52") W 90mm (3.54") x H 55mm (2.16")
Weight:
0.66kg (1.455lbs)
Front Runner
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1170Mm(L) - KVCA004T
$991.80
$1,102.00
Maximize your canopy's cargo capacity with the highly versatile Slimpro Canopy Rack Kit and the wide variety of available accessories for the load area. This smart Kit will ensure that you can easily switch between your work, sports, and adventure gear. There is no better way to carry cargo on your canopy.
Compatible with a canopy length of 1170mm / 46.06" or longer.
Load-carrying area: 1256mm (49.44") x 1160.8mm (45.70").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 14.73kg (32.47lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 19kg (42lbs)
Front Runner
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1470Mm(L) - KVCA003T
$1,027.80
$1,142.00
Fit the lightweight Slimpro Canopy Rack Kit so your canopy can tackle those tough cargo-carrying tasks. Thanks to the wide range of smart rack accessories, you can easily switch your set-up to suit work, sports, or camping needs. This Kit is the smart way to maximise your canopy’s cargo-carrying capacity.
Compatible with a canopy length of 1470mm / 57.87" or longer.
Load-carrying area: 1256mm (49.44") x 1358mm (53.46").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 15.33kg (33.8lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 20kg (44lbs)
Front Runner
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1570Mm(L) - KVCA002T
$1,063.80
$1,182.00
The versatile Slimpro Canopy Rack Kit transforms the top of your canopy for unlimited external gear-carrying options. Thanks to the adaptable slat configurations and many Front Runner Rack accessories, you can easily switch from weekday work gear to weekend adventure gear.
Compatible with a canopy length of 1570mm / 61.81" or longer.
Load-carrying area: 1256mm (49.44") x 1560mm (61.41").
Eight (8) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:4x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps4x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT003 - Van Rack Side Profile / 1560mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 16.82kg (37.08lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 26kg (57lbs)
Front Runner
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 1772Mm(L) - KVCA001T
$1,099.80
$1,222.00
Unlock essential gear storage opportunities on your canopy with the versatile Slimpro Canopy Rack Kit. The adaptable slat configurations and many Front Runner Rack accessories allow smooth transitions from weekday tradesman essentials to your weekend exploration gear. This Canopy Kit and the rack accessories are the best way to improve external gear carrying on your canopy.
Compatible with a canopy length of 1772mm / 69.76" or longer.
Load-carrying area: 1256mm (49.44") x 1762mm (69.37").
Eight (8) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
4x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps4x RRAC982 - Bolt Kit for KVCA001T-KVCA005T2x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT004 - Van Rack Side Profile / 1762mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 26.25kg (57.87lbs)Shipping Dimensions:Width: 445mm (18")Length: 1770mm (70")Height: 200mm (8")Shipping Weight:Weight: 32kg (70lbs)
Front Runner
FRONT RUNNER Slimpro Canopy Rack Kit / 1335Mm(W) X 970Mm(L) - KVCA005T
$708.30
$787.00
The Slimpro Canopy Rack Kit creates those all-important gear storage possibilities on the top of your canopy. The customisable slat configurations allow you to easily carry day-to-day tradesman gear with a quick change to your weekend adventure gear. This Kit is compatible with most Front Runner accessories, and together, they will massively increase external gear-carrying capabilities.
Compatible with a canopy length of 970mm / 38.2" or longer.
Load-carrying area: 1256mm (49.44") x 1175mm (46.25").
Six (6) Mounting Feet secure into the canopy or canopy tracks (the later will require: ).
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. Drilling or modification may be required.
For existing canopy tracks can be used (sold separately).
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimpro Tray to your canopy.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FAVF003 - Ford Transit Van Rack Foot Set2x RRAC208 - Van Rack Side Profile End Caps3x RRAC982 - Bolt Kit for KVCA001T-KVCA005T1x RRNS1255 - Narrow Slat / 1255mm (Pair)1x SPVT001 - Van Rack Side Profile / 1156mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 10.31kg (22.73lbs)Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 13kg (29lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Adjustable Wind Fairing - RRAC329
$173.70
$193.00
Give your van or ride that sought-after rugged and capable look with this width adjustable Wind Fairing. The fairing is also the perfect place to mount a lightbar or spotlights for nighttime adventures.
A Wind Fairing for Slimpro Van Racks.
Secures suitable 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount*, 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount*, Light Pods or Spotlights to your Slimpro Van Racks.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
Provides better airflow by moving air up and over the rack and accessories, reducing drag and wind noise.
Note: Lightbars*, Light Pods and Spotlights are sold separately. 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount requires a minimum rack width of 1345mm.
Consists of:1x Slimpro Van Rack Adjustable Wind Fairing Installation HardwareFitting InstructionsMaterials used:Black powder-coated high strength steelProduct Dimensions:Closed Dimensions:173mm (6.8") L x 1350mm (53.1") W x 115mm (4.5") HOpen Dimensions:173mm (6.8") L x 1568mm (61.7") W x 115mm (4.5") HWeight:3.22kg (7.1lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2367Mm (L) - KVXS006
$276.30
$307.00
Upgrade your Front Runner Slimpro Van Roof Rack by adding expedition-style side rails. This side rail kit allows the front and back of the rack to remain open for loading larger items such as kayaks, paddleboards and surfboards. It features the same durable, weather-resistant powder-coated finish as the Slimpro Van Roof Rack and adds extra cargo support without adding too much weight or additional wind resistance.
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2367mm / 93.2".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-jointsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2245mm (88.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)
Weight:4.34kg (9.6lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2569Mm (L) - KVXS007
$283.50
$315.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2569mm / 101.1".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2417mm (95.2") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
4.58kg (10.1lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2973Mm (L) - KVXS008
$327.60
$364.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2973mm / 117".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
10x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
8x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2649mm (104.3") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.05kg (11.1lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Expedition Rails / 3579Mm (L) - KVXS009
$333.90
$371.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3579mm / 140.9".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3206mm (126.22") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.64kg (12.4lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Expedition Rails / 3927Mm (L) To 4129Mm (L) - KVXS010
$419.40
$466.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3927mm / 154.6" to 4129mm / 162.6".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
12x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
10x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3782mm (148.9") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
6.59kg (l14.5bs)
Front Runner
FRONT RUNNER Slimpro Van Rack Expedition Rails / 4533Mm (L) - KVXS011
$480.60
$534.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 4533mm / 178.5".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
16x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
12x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
4131mm (162.6") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
8.26kg (18.2lbs)
Front Runner
FRONT RUNNER Slimsport/Slimpro Van Side Mount Accessory Bracket / Large - RRAC283
$89.10
$99.00
This pair of brackets secures to the slats of your rack to accommodate most Front Runner side mount accessories.
The brackets are adjustable and can be set at any position along the T-slot of the rack slats.
Made from high strength steel and sealed with the same durable, weather resistant black powder-coating as the Front Runner Roof Racks.
Includes installation hardware and fitting instructions.
No drilling is required to attach side accessories.
Features
Consists of:
1 x Side Mount Accessory Bracket
1 x Hardware Kit
1 x Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
222mm (8.7") L x 50mm (2") W x 99mm (3.9") H
Weight:
0.7 kg (1.5lbs)
Front Runner
FRONT RUNNER Spare Bolt Kit For Slimline Ii Tray - RRAC041
$70.20
$78.00
Replacement nuts and bolts for lost or damaged Slimline II components.
Features
Consists of:
32x M8 nyloc nuts
4x M6x16 dome head bolts
28x M8x25 dome head bolts
4x M8x45 dome head bolts
2x Aluminium rack joiners (thin)
2x Aluminium rack joiners (thick)
Front Runner
FRONT RUNNER Spare Tire Mount Braai/Bbq Grate - VACC023
$328.50
$365.00
This ingenious, stainless steel cooking grate, stores over your spare wheel and takes up virtually no space.
Laser cut steel grill on aluminum legs.
Grill and griddle sections for campfire cooking options.
Hooks over a spare wheel (secure with Spare Wheel Step, Strap Ratchet 4M Endless or wheel cover - not included).
Fits 29 to 37 tyres (740mm to 890mm).
Please Note: This Spare Tire Mount Braai/BBQ Grate is designed to be used for cooking purposes over coals and not used over high flames.
Features
Material used:
Grill: Laser-cut steel
Legs and spacers: Die Cast Aluminium
Product Dimensions:
Overall Set-up Dimensions:
210mm (8.5") H x 790mm (31.1") to 950mm (37.4") in Diameter
Grill top Diameter / Cooking Surface:
600mm (23.6") Diameter
Fits:
29" to 37" tyres
Weight:
4.5kg (9.9lbs)
Front Runner
FRONT RUNNER Spare Tire Mount Braai/Bbq Grate Leg Replacement Kit - VACC031
$45.00
$50.00
This kit Includes all the necessary hardware and assembly instructions.
Features
Consists of:
1 x Aluminum Braai/BBQ Grate Leg
1 x Aluminum Braai/BBQ Grate Leg Spacer
Installation Hardware
Materials used:
Ultra Hi Temperature Coated Aluminum
Steel - Fasteners
Product Dimensions:
363mm (14.3") L x 12mm (0.5") W x 215mm (8.5") H
Weight:
280g (9.9oz)
Front Runner
FRONT RUNNER Spare Wheel Inflator - REQU059
$63.00
$70.00
Using your compressor, this nifty hose device will inflate your spare tyre when you've sprung a leak on one of your fitted tyres.
Product Dimensions (mm):250L x 250W x 30H
Weight:0.11kgSpecial Notes
SKU; RR-AC-04
Front Runner
FRONT RUNNER Spare Wheel Step - LADD007
$180.00
$200.00
Convenient means of reaching your roof rack.
Attaches to rear mounted spare wheel using heavy duty black ratchet strap provided.
Allows effortless access to Roof Racks.
Black powder coated high strength steel frame with non-slip tread plates.
Fits wheel sizes from 24" to 35". No drilling, no tools -- just wrap, ratchet tight, and step up.
Can be used to secure the Spare Tire Mount Braai/BBQ Grate to your vehicles spare wheel.
Features
Consists of:
Ladder, top step and bottom step
5m (196.85) endless ratchet strap
Materials used:
Black powder-coated 3mm (0.11") high strength steel
Product Dimensions:
L 450mm (17.71") x W 150mm (5.9") x H 110mm (4.33")
Length of strap: 5m (196.85)
Weight:
3kg (6.6lbs)
Note:
Fits all wheel types between 24"and 35"
Front Runner
FRONT RUNNER Stainless Steel Collapsible Cup Holder - VACC002
$19.80
$22.00
A fold away cup holder, mountable to any flat surface.
Made of stainless steel.
Pre-cut holes for mounting purposes.
Folds out to support bottom and circumference of the cup, bottle or can.
Holder can accomodate items with a maximum diameter of 58.5mm (2.3").
Features
Consists of:
1x Cup holder
6x Pop rivets
Materials used:
Stainless steel
Weight:
0.1kg (0.2lbs)
Holder slot dimension:
Diameter: 58.5mm (2.3")
Front Runner
FRONT RUNNER Stainless Steel Tie Down Rings - RRAC025
$21.60
$24.00
These easy to use tie down rings quickly and easily mount to the t-slots on the top, sides and/or the bottom of Front Runner Racks. Sold in Pairs.
No tools required. Just hand tighten.
Slide these around anywhere on the rack for an endless supply of tie down points.
Perfect for use with the Front Runner Stratchit or any style tie down strap.
Mount unusual loads securely to your Rack for hassle free/rattle free travels where a specific mounting accessory is not available.
Of all the accessories for Front Runner Racks, this is THE must have.
Features
Material used:
Stainless steel
Consists of:
2x Ring nuts
2x Bolts
2x Plastic washers
Weight:
0.12kg (0.26lbs)
Front Runner
FRONT RUNNER Starlink Antenna Rack Mount - RRAC300
$62.10
$69.00
Easily mount your Starlink Flat High Performance system onto your Front Runner Roof Rack by using the strong, steel Starlink Antenna Rack Mount. You can now uninterruptedly use the Starlink service without having to adjust the angle or focus.
A bracket set to install the Starlink Flat High Performance on all Front Runner roof racks.
Allows uninterrupted use of your Starlink Flat HP service while in motion without the need to adjust angle or focus.
Brackets are angled to allow for water shed.
Made of high strength steel and finishined in the same durable black powder-coating as the Front Runner racks.
Instalation hardware and fitment guide included.
NOTE: The screws to secure dish to the brackets are not included, we recommend to use the original screws supplied with your Starlink.
Consists of:2 x Mounting Bracket (1 Left hand & 1 Right hand) Installation HardewareFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:453mm (17.8") L x 97mm (3.8") W x 86mm (3.4") H
Weight:1.27Kg (1.3lbs)
Front Runner
FRONT RUNNER Storage Box Foam Dividers - SBOX052
$56.70
$63.00
These Storage Box Foam Dividers are designed to partition and protect your valuables on any adventure.
Designed to be compatible with the Front Runner Wolf Pack Pro or the Cub Pack.
Includes three (3) foam strips so you can create your own configurations.
Includes a craft utility knife and a set of 10 clips.
Features
Consists of:
3 x Foam Dividers
1 x Craft Utility Knife
1 x Set of 10 Plastic Clips
Fitting Instructions
Materials used:
Grey Foam
Plastic
Product Dimensions:
950mm (37.4") L x 178mm (7") W x 12mm (0.5") H (Single Foam Divider)
Weight:
0.57kg (1.3lbs)
Front Runner
FRONT RUNNER Stratchit Shorties - STRA037
$43.20
$48.00
Cinch down loads simply and effectively so you don't have to worry about gear rattling loose on bumpy roads.
Stratchit Shorties absorb tension like a stretchy ratchet strap.
Stratchit Shorties are adjustable from 470mm / 18.5" in length to 1017mm / 40" in length.
Quick and efficient. Simply secure the ends and hand tighten the strap.
Fastens to, and around, just about anything.
Perfect for Front Runner Racks and accessories, but work with all roof rack systems.
Many uses! Secure: Wolf Pack Pro, Cub Pack and other cases (Pelican, Zargas, Alu-box, etc.) to any roof rack.
Secure: Surfboards, SUP, bicycles, firewood, chairs, etc.
For extra length Stratchits can be used.
Keep your luggage secure inside the vehicle. Scrunch up your sleeping bags extra tight.
Sold in pairs.
HOW TO USE:
Hook to the Front Runner Roof Rack Tie Down Ring or loop around the slats or side profiles and fasten the Stratchit Shortie to itself.
You can even remove the carabiner and loop the Stratchit Shortie through itself - to fasten around any roof rack rail, railing, pole, bumper, tire carrier.... etc.
WARNINGS:
Please read and follow all these warnings carefully -- failure to do so could result in cargo damage and could cause injury.
Do not over tighten. Use only hand leverage.
Never stand in the direct path of the Stratchit Shortie when tensioning to prevent the risk of injury should the strap become detached.
Loads settle. Check Stratchit Shortie after first 10 miles of driving and each 50 miles thereafter.
User to evaluate working load and requirements. DO NOT use to support human weight under any circumstance.
Check the Stratchit Shortie regularly for signs of deterioration or damage.
To ensure longevity, please remove the Stratchit Shorties from the sun and weather elements when not in use.
Make sure that the points of attachment to the vehicle or trailer are of sufficient strength to withstand the maximum loading that will be produced during use.
Take additional care if securing large objects that may be subject to aerodynamic lifting forces caused by bumps. Always use the appropriate number of straps and drive at reduced speeds to minimize the effects of these forces.
Features
Consists of:
2 x Stratchit Shorties
Materials used:
Polyester webbing
Latex Bungee
7mm Stainless Steel Carabiner
Product Dimensions:
Adjustable from 470mm (18.5") L to 1017mm (40) L x 25mm (1.0") W
Weight:
185g (6.5oz) each
370g (13 oz) per pair
Working Load Rating:
220 lbs (100kg)
Front Runner
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack 40In Light Bar Wind Fairing -Rrac239 - KRSV001T
$1,847.70
$2,053.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Suzuki Grand Vitara (2007-2014) contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSV001T - Suzuki Grand Vitara (2007-2014) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
1 x TRSV001 - Suzuki Vitara Tracks / 1850mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 29kg (63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 33.3kg (73.3lbs)