Matt

​A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle. ​A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.This allows a winch to sit securely on the chosen vehicle. Consists of:1 x Winch Plate Product Dimensions:600mm (23.6") L x 190mm (7.5") W x 87mm (3.4") H Weight:5.5kg (12.1lbs)

Keep your passports, cash, valuable travel documents, and mobile devices out of sight and locked tight in this under the seat all steel vehicle safe.​​ All vehicle based adventures require you to carry valuables. Don’t leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft. The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor, yet is still easily accessible. Manufactured with black powder coated 2mm thick steel. Designed and built in South Africa - a country where crime deterrence is an art form.Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8. Consists of:1 x Safe1 x Cam Lock incl. 2 keysInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:260mm (1.02") L x 500mm (19.7") W x 70mm (2.8") H (incl. lock)Opening Dimensions:156mm (6.1") L x 334mm (13.2") WWeight:2.44kg (5.4lbs)

More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.   Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points. Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray. This slat will work with any Front Runner Slimline II Rack that is 1255mm wide. Can also be used to build a custom Load Bar Kit, or as a replacement slat. Features T-slots on both the top and bottom faces. A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.  Made from the same black powder coated aluminum as all Front Runner Racks. RRSAD1255 - 1255mm Slat Add-On KitConsisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1255 - 1255mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.69kg (3.73lbs)Shipping Dimensions:Width: 110mm (4")Length: 1260mm (50")Height: 70mm (3")Shipping Weight:Weight: 2.07kg (5lbs)

Easily mount your Manta Wing or Bat Wing Awning to a Slimline II roof rack with these sturdy Front Runner brackets. These corrosion resistant brackets secure a Manta Wing or Bat Wing Awning to the side profile of a Slimline II roof rack. No drilling required. The brackets simply bolt onto the t-slots in the side profile of your Slimline II Roof Rack. Pre-drilled mounting points designed specifically for Manta/Bat Wing Awnings allow installation in mere minutes. Made from steel and black powder coated with the same durable, weather resistant coating as the Slimline II Roof Rack. Consists of:2x Awning bracketsBolt kitMaterials used:Black powder-coated steelProduct dimensions:L 152mm (6") x W 85mm (3.3") x H 198mm (7.8")Weight:2.8kg (6.2lbs)

Massively improve your Ford F150’s cargo-carrying capabilities with the easy-access Pro Bed Rack System. It easily secures to the top of the load bed and frees up space in the load bed. Use the Pro Bed Rack-specific accessories, such as the Molle Panel and Recovery Device Mount, to customize your ride. This Pro Bed System is specifically designed to fit the Ford F-150 6.5 load bed. This System provides the frame to customize your Load Bed storage configuration. Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headboard Molle Panel, Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.  Secures to the load bed of the Ford F-150 6.5 with specific mounting brackets bolted to the existing factory mounting points.  Made of a combination of steel and aluminium, sealed in the same durable and corrosion resistant black powder-coating as Front Runner racks. The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net PBFF004S - Ford F-150 6.5' Bed (2009-Current) Pro Bed System Consisting of:1x PBAL1755 - Pro Bed Rack Aluminium Extrusions X- Large1x PBFF001 - Ford F-150 Crew Cab Pro Bed Rack Mounting System1x PBRA001 - Pro Bed Rack Universal Structural Components Material Used:Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 53kg (116.84lbs)Installed height from load bed ledge:520mm/ 20.47” Shipping Dimensions:Width: 640mm (25")Length: 1820mm (72")Height: 380mm (15") Shipping Weight:Weight: 53kg (117lbs)

Turn your ordinary Toyota Land Cruiser Prado 250 into an extraordinary cargo carrier with the low-profile and lightbar-ready Slimsport Roof Rack. Prado owners will love how this durable, user-friendly rack can be customized to carry camping, sports, work, or any other gear. The multi-functional Slimsport Roof Rack will effortlessly do the job in the city and on the toughest trails your Toyota can find. This rack is super quiet thanks to the included 40” Lightbar Wind Fairing.    This low-profile flat deck Slimsport rack has a load carrying area of 2210mm (87") L x 1200mm (47.2") W. The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet. Included in the Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack 40" Light Bar Wind Fairing allows the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. KSTL005T - Toyota Land Cruiser Prado 250 (2024-Current) Slimsport Roof Rack Kit / Lightbar ReadyConsisting of:1x KSTL002 - Toyota LC Prado (2024-Curr) SSport Tray1x RRAC341 - Toyota Land Cruiser Prado (2024-Current) SlimsportMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2210mm (87") L x 1200mm (47.2") W x 140mm (5.5") HApproximate Installed Weight: 38.06kg (83.91lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 320mm (13")Length: 1700mm (67")Height: 210mm (8")Shipping Weight:Weight: 41kg (90lbs)

Toyota HiLux N90 Gen 9 2025 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3802 Suits Toyota HiLux N90 Gen 9 2025 on Colour Black Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility BSM – Blind Spot Monitoring to alert you to vehicles beside you Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Toyota HiLux N90 Gen 9 2025 on Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3802 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota HiLux N90 Gen 9 2025 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3803 Suits Toyota HiLux N90 Gen 9 2025 on Colour Chrome Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility BSM – Blind Spot Monitoring to alert you to vehicles beside you Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Toyota HiLux N90 Gen 9 2025 on Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3803 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota HiLux N90 Gen 9 2025 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3851 Suits Toyota HiLux N90 Gen 9 2025 on Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information This mirror ONLY suits the Double-Cab Pickup (with factory tub) SR, SR5, SR5+, Rogue and Rugged X vehicles with an automatic transmission. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota HiLux N90 Gen 9 2025 on Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3851 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota HiLux N90 Gen 9 2025 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3850 Suits Toyota HiLux N90 Gen 9 2025 on Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Indicators – Integrated indicators for improved road visibility Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information This mirror ONLY suits the Double-Cab Pickup (with factory tub) SR, SR5, SR5+, Rogue and Rugged X vehicles with an automatic transmission. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota HiLux N90 Gen 9 2025 on Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3850 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota Tundra & 2024 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3250 Suits Toyota Tundra & 2024 on Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Memory – Memory function recalls your preferred mirror position Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information Note: MSA Tundra Mirrors do not include indicators as they are not required for this application. The factory Tundra mirrors have indicators; however, when imported, a CAT 6 indicator is installed in the fender, disabling the mirror indicator. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota Tundra & 2024 on Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3250 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Toyota Tundra & 2024 on Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM3251 Suits Toyota Tundra & 2024 on Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Power Fold – Power-fold function, mirrors fold in and out with the vehicle BSM – Blind Spot Monitoring to alert you to vehicles beside you Camera Provision – 360 degree camera provision for compatible camera systems Memory – Memory function recalls your preferred mirror position Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Important Fitment Information Note: MSA Tundra Mirrors do not include indicators as they are not required for this application. The factory Tundra mirrors have indicators; however, when imported, a CAT 6 indicator is installed in the fender, disabling the mirror indicator. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota Tundra & 2024 on Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM3251 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

This triple set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Colorado/GMC Canyon when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1560mm (61")Height: 230mm (9")Shipping Weight:Weight: 12kg (26lbs)

This triple set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Silverado/GMC Sierra when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 9kg (19.84lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1690mm (67")Height: 150mm (6")Shipping Weight:Weight: 10kg (22lbs)

This triple set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Colorado/GMC Canyon when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1560mm (61")Height: 230mm (9")Shipping Weight:Weight: 12kg (26lbs)

This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Colorado/GMC Canyon when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1500mm (59")Height: 155mm (6")Shipping Weight:Weight: 8kg (18lbs)

This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Colorado/GMC Canyon when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1500mm (59")Height: 155mm (6")Shipping Weight:Weight: 8kg (18lbs)

Transport all your adventure gear safely over the bed of your Chevy Silverado with these two strong, sleek Pickup Bed Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight: 12.2kg (26.9lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 130mm (5.0")Length: 1690mm (67.0")Height: 310mm (12.0") Shipping Weight:12.0kg (26.0lbs)

A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 40mm Feet, 2 1165mm Load Bars, 2 1150mm Canopy Tracks, and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA007 - Canopy Load Bar Kit / 1165mm (W) - by Front Runner Consisting of: 2 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner1 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner  Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight 7kg (14lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 245mm (10")Length 1290mm (51")Height 115mm (5") Shipping Weight:

The Canopy Load Bar Kit was made for travelers who need additional canopy storage capacity, but don’t want to sacrifice a low-profile build. These 1345mm bars use the same durable aluminum slats as the Slimline II Roof Rack, allowing you to mount Front Runner accessories. Comes with all hardware and components needed to fit load bars on a vehicle, including four (4) mounting feet, two (2) 1345mm load bars, an installation kit and fitting instructions. These load bars are mounted to your canopy via a set of supplied mounted feet. Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. Made from steel and durable, weather-resistant black powder-coated aluminum. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA0010 - Canopy Load Bar Kit / 1345mm - by Front Runner Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK015 - Roof Load Bar Pair 1345mm(W) Material Used:Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 6kg (13.23lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 110mm (4")Length: 1455mm (58")Height: 135mm (6") Shipping Weight:Weight: 5.18kg (11.42lbs)

The Canopy Load Bar Kit was made for travelers who need additional canopy storage capacity, but don’t want to sacrifice a low-profile build. These 1475mm bars use the same durable aluminum slats as the Slimline II Roof Rack, allowing you to mount Front Runner accessories. Comes with all hardware and components needed to fit load bars on a vehicle, including four (4) mounting feet, two (2) 1475mm load bars, an installation kit and fitting instructions. These load bars are mounted to your canopy via a set of supplied mounted feet. Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. Made from steel and durable, weather-resistant black powder-coated aluminum. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA0011 - Canopy Load Bar Kit / 1475mm - by Front Runner Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK017 - Roof Load Bar Pair 1475mm(W) Material Used:Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 6kg (13.23lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 110mm (4")Length: 1585mm (63")Height: 135mm (6") Shipping Weight:Weight: 5.6kg (12lbs)

Clear up precious interior space and still get your adventure gear anywhere with the help of these low-profile, lightweight Front Runner Load Bars for your RSI DC Smart Canopy. A set of Load Bars used to transport gear on the roof of your RSI Double Cab Smart Canopy. This low profile solution includes 4 mounting Feet, 2 1255mm Load Bars, installation kit and fitting instructions. These Load Bars are mounted to the RSC Double Cab Smart Canopy via a set of supplied Mounted Feet. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA008 - RSI Double Cab Smart Canopy Load Bar Kit / 1255mm - by Front RunnerConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK014 - Roof Load Bar Pair 1255mm(W)2x RRAC921 - Canopy Rack Kit Installation SetMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.44kg (11.99lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1380mm (54")Height: 150mm (6")Shipping Weight:Weight: 5.6kg (12lbs)

Massively increase the cargo-carrying capacity of your RSI Canopy by installing this durable Load Bar Kit on top of it. Load bars attach to the canopy using the supplied feet and they have the same T-slots as slats as a Front Runner roof rack, so you can fit rack accessories to it.   Includes all hardware and components needed to fit load bars on your Full Pickup when fitted with a RSI Canopy, including four (4) mounting feet, two (2) 1345mm load bars, an installation kit and fitting instructions. These load bars are mounted to your RSI Canopy via a set of supplied mounted feet. Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. Made from steel and durable, weather-resistant black powder-coated aluminum. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA016 - RSI Canopy Full Size Pickup Load Bar Kit / 1345mmConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK015 - Roof Load Bar Pair 1345mm(W)2x RRAC921 - Canopy Rack Kit Installation SetMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.18kg (11.42lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 115mm (5")Length: 1450mm (57")Height: 155mm (6")Shipping Weight:Weight: 5kg (11lbs)

Upgrade your pickup truck’s carrying capacity and easily transport adventure sports gear such as bikes, kayaks, and fishing rods with this Canopy Load Bar Kit. These bars are custom-designed to be mounted on a 1425mm canopy via a set of supplied mounted feet without compromising the canopy. Easily kit out your rig with a variety of compatible Front Runner accessories thanks to the sliding bolts t-slots which allow for quick fitting and removal. Comes with all hardware and components needed to fit load bars on your Canopy, including four (4) mounting feet, two (2) 1425mm load bars, an installation kit and fitting instructions. These load bars are mounted to your canopy via a set of supplied mounted feet. Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. Made from steel and durable, weather-resistant black powder-coated aluminum. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA013 - Canopy Load Bar Kit / 1425mm (W)Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.8kg (12.79lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1500mm (59")Height: 145mm (6")Shipping Weight:Weight: 6kg (13lbs)

Load up adventure sports gear such as bikes, kayaks, and fishing rods on your pickup truck’s canopy with these load bars. This Canopy Load Bar Kit is specially designed to fit on a shorter (1255mm) canopy via a set of supplied mounted feet without compromising the canopy. These load bars are compatible with a variety of Front Runner accessories thanks to the sliding bolt t-slots.   Comes with all hardware and components needed to fit load bars on your canopy, including four (4) mounting feet, two (2) 1255mm load bars, an installation kit and fitting instructions. These load bars are mounted to your canopy via a set of supplied mounted feet. Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. Made from steel and durable, weather-resistant black powder-coated aluminum. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. * Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA012 - Canopy Load Bar Kit / 1255mm (W)Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK014 - Roof Load Bar Pair 1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.3kg (11.68lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1350mm (53")Height: 145mm (6")Shipping Weight:Weight: 6kg (13lbs)

Upgrade your pickup truck’s carrying capacity and easily transport adventure sports gear such as bikes, kayaks, and fishing rods with this Canopy Load Bar Kit. These bars are custom-designed to be mounted on a canopy via a set of supplied mounted feet without compromising the canopy. Easily kit out your rig with a variety of compatible Front Runner accessories thanks to the sliding nut t-slots which allow for quick fitting and removal. Comes with all hardware and components needed to fit load bars on your Canopy, including four (4) mounting feet, two (2) 1575mm load bars, an installation kit and fitting instructions. These load bars are mounted to your canopy via a set of supplied mounted feet. Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. Made from steel and durable, weather-resistant black powder-coated aluminum. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCA014 - Canopy Load Bar Kit / 1575mm (W) - by Front RunnerConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.98kg (13.18lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1670mm (66")Height: 145mm (6")Shipping Weight:Weight: 6kg (13lbs)

Transport all your adventure gear safely over the bed of your Chevy Silverado with these three strong, sleek Pickup Bed Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner1 x TRBU004 - Bakkie Load Bed Tracks / 1600mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 16.6kg (36.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 130mm (5.0")Length: 1605mm (63.0")Height: 390mm (15.0") Shipping Weight:16.6kg (37.0lbs)

This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Silverado/GMC Sierra when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 1500/2500/3500 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.8kg (14.99lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1690mm (67")Height: 155mm (6")Shipping Weight:Weight: 9kg (20lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation.

This triple set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Silverado/GMC Sierra when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 9kg (19.84lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1690mm (67")Height: 150mm (6")Shipping Weight:Weight: 10kg (22lbs)

Transport all your adventure gear safely over the bed of your Chevy Silverado with these three strong, sleek Pickup Bed Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab / Short Load Bed. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 15.9kg (35.0lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 1685mm (66.0")Length: 125mm (5.0")Height: 385mm (15.0") Shipping Weight:14.4kg (32.0lbs)

Transport all your adventure gear safely over the bed of your Chevy Silverado with these two strong, sleek Pickup Bed Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab / Short Load Bed. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KRCS004 - Chevrolet Silverado Crew Cab / Short Load Bed (2007 - Current) Double Load Bar Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner Material Used:Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight: 11.4kg (25.2lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 1685mm (66.0")Length: 125mm (5.0")Height: 310mm (12.0") Shipping Weight:11.0kg (24.0lbs)

FATZ FABRICATION High Flow Airbox – Toyota LandCruiser 300 Series Take your 300 Series LandCruiser to the next level with the FatZ High Flow Airbox, designed to improve induction performance while maintaining a clean, factory-style appearance in the engine bay. Part of the FatZ X-Series range, this airbox is engineered using advanced 3D modelling and precision rotational moulding to deliver excellent airflow, lightweight construction and long-term durability. Key Features High-flow induction design for improved airflow Designed specifically for the Toyota LandCruiser 300 Series Precision rotational moulded construction Lightweight and durable design Fully moulded ducting system for improved fitment OEM-inspired finish for a clean factory-style appearance Designed to minimise flow restrictions in high-performance applications Supplied with an air filter of your choice Optional additional filter available at a discounted price Designed for Performance The FatZ High Flow Airbox has been developed from the ground up to optimise airflow through the induction system. Its fully moulded ducting is designed to integrate seamlessly with the engine inlet, helping provide consistent airflow while reducing potential fitment inconsistencies. The result is a high-quality induction solution that combines performance, durability and a factory-style appearance. Filter Options Every FatZ High Flow Airbox is supplied with an air filter of your choice. You can also add an additional filter to your order at a discounted price. SKU: FF300-AB Kit includes: Airbox with filter, Clear lid, instructions. *Snorkel compatibility only guaranteed with Fatz Built snorkel at release of product. Note: This product is available on back-order.

The ALPINE KTX-NS01EU NaviStick is a compact plug-and-play GPS navigation module designed to add advanced HEMA on and off-road navigation to compatible Alpine head units. Simply connect the NaviStick to the USB port using the included 10cm USB extension cable to access detailed maps, smart routing, live traffic information and a range of advanced navigation features. Featuring 3 years of free HEMA Maps Gold subscription, the NaviStick provides reliable navigation for everyday driving, touring and off-road adventures. Its compact design allows the module to be discreetly stored after installation, keeping your dashboard clutter-free while providing seamless built-in navigation. Integrated HEMA Maps Navigation The NaviStick provides access to HEMA's extensive mapping collection, including detailed topographic maps and off-road navigation. Plan routes with confidence using HEMA Explorer, 3D Explorer and 4WD mapping features designed for Australian roads and remote tracks. HEMA Explorer Maps HEMA 3D Explorer Maps HEMA 4WD Maps Detailed topographic mapping 3D maps with elevation information On-road and off-road navigation Smart route planning Advanced points of interest Advanced address search Note: HEMA 4WD Maps are sold separately. Smart Navigation Features The NaviStick provides intelligent navigation tools to make route planning easier and more efficient. Smart Routes use historic traffic patterns to help determine suitable routes, while Eco Route Search can assist with selecting more efficient journeys. Smart Routes using historic traffic patterns Eco Route Search Live Traffic Information via internet hotspot Extended traffic sign display Advanced address search Advanced POI functions 3D City Mode with building and icon display 3D motorway junction view with sign posts Compact Plug-and-Play Design Designed for simple installation, the NaviStick connects directly to compatible Alpine head units via USB. Its compact and lightweight design allows it to be discreetly positioned away from the dashboard once connected, providing a clean and convenient navigation upgrade. USB plug-and-play connection Compact and portable design Includes 10cm USB extension cable Status LED indicator Built-in Wi-Fi module HEMA Maps Updates The NaviStick includes a 3-year HEMA Maps Gold subscription, providing access to ongoing map updates and an expanding database of points of interest, track information and navigation improvements. Compatible Alpine Head Units The KTX-NS01EU NaviStick is compatible with Alpine head units running software version 5.0.001 or higher, including: iLX-F511A – Alpine Halo 11 iLX-F509A – Alpine Halo 9 iLX-507A i905-LC70-24 i905-LC70 i905-LC16 i905-LC08 Important: The included 10cm USB cable must be used when connecting the NaviStick to a compatible Alpine head unit. Key Specifications Processor: Dual-Core 2GHz 64-bit ARMv8 Cortex-A53 GPU: PowerVR GE8300 Graphics Support: OpenGL ES 3.2 and Vulkan 1.3 RAM: 3GB Flash Memory: 32GB Wi-Fi: 2.4GHz / 5GHz Connection: USB plug-and-play HEMA Subscription: 3 years HEMA Maps Gold included

The ALPINE HX-Z6 is a rugged 5.6-inch smartphone navigator designed for off-road adventures, outdoor exploration and reliable communication. Powered by Android and Google Mobile Services, it provides access to a wide range of apps through the Google Play Store, along with Android Auto capability and HEMA navigation features. Built for demanding environments, the HX-Z6 combines UHF analogue and DMR digital radio communication, GPS navigation, 4G connectivity, long-lasting battery performance and rugged protection in one versatile device. Whether you're hiking, trail riding, motorcycling, touring or exploring remote tracks, the HX-Z6 is designed to keep you connected and on course. UHF & DMR Digital Radio Stay connected without relying on mobile coverage with the built-in UHF walkie-talkie and DMR digital radio functionality. With up to 10 km range in open areas and up to 5 km in urban terrain, the HX-Z6 provides reliable communication for outdoor activities and group travel. 2W UHF analogue radio DMR digital mobile radio Removable antenna Up to 10 km range in open areas Up to 5 km range in urban terrain HEMA Off-Road Navigation The HX-Z6 provides access to HEMA's renowned off-road mapping, helping you navigate remote tracks, national parks, desert terrain and unsealed roads. Detailed topographic information, 3D mapping, track difficulty data and points of interest provide useful information for planning and navigating your next adventure. HEMA Explorer Maps HEMA 3D Explorer Maps HEMA 4WD Maps Detailed topographic mapping Track difficulty information On-road and off-road route planning Turn-by-turn navigation Campsites and points of interest Online map updates Note: HEMA 4WD maps are sold separately. Rugged Construction Designed to withstand challenging outdoor conditions, the HX-Z6 is IP68 and IP69K rated for water and dust resistance and is certified to MIL-STD-810H military standards. It is waterproof to 1.5 metres for up to 30 minutes in accordance with IEC 60529, making it well suited to demanding outdoor environments. IP68 waterproof rated IP69K rated Dust and shock resistant MIL-STD-810H military certified Water resistant to 1.5 metres for 30 minutes Powerful Performance & Long Battery Life Powered by a MediaTek Helio G99 octa-core processor with 12GB RAM and 256GB internal storage, the HX-Z6 provides responsive performance for navigation, communication and everyday Android applications. Its large 10,850mAh battery provides up to 600 hours of standby time and up to 39 hours of talk time, while 33W USB-C fast charging helps minimise downtime. Android & Google Mobile Services The HX-Z6 runs Android with Google Mobile Services, giving you access to a wide range of applications through the Google Play Store. The device also supports Android Auto, allowing compatible apps and functions to be accessed conveniently while travelling. Dual SIM & Expandable Storage Triple card slots provide dual Nano SIM capability alongside a dedicated microSD card slot. With 256GB of internal storage and support for up to 2TB of expandable storage, the HX-Z6 provides plenty of space for maps, applications, media and other files. NFC & Google Pay Built-in NFC provides convenient contactless functionality, including support for Google Pay. Make quick and secure payments while travelling without needing to carry your wallet. Security & Gloves Mode The HX-Z6 provides convenient security with both Face Unlock and side-mounted Fingerprint ID. Gloves Mode keeps the touchscreen responsive when wearing gloves, making the device practical for outdoor activities and challenging conditions. Global Connectivity With 4G connectivity, dual Nano SIM support and global cellular bands, the HX-Z6 is designed for reliable communication while travelling. It also supports VoLTE HD calling, Wi-Fi and Bluetooth connectivity. 4G / global cellular bands Dual Nano SIM VoLTE HD calling 2.4G / 5G Wi-Fi Bluetooth 4.2 USB-C connectivity Built-in FM radio GPS & Multi-System Positioning The HX-Z6 supports multiple satellite positioning systems for accurate location tracking and navigation, including GPS, GLONASS, BeiDou and Galileo. Camera System Capture photos and video on the go with the HX-Z6's 50MP rear camera and 16MP front camera. The high-resolution camera system provides added versatility for documenting trips, trails and outdoor adventures. Key Specifications Display: 5.6-inch Full HD Resolution: 2160 x 1080 pixels Pixel Density: 424 PPI Processor: MediaTek Helio G99 octa-core RAM: 12GB Storage: 256GB Expandable Storage: Up to 2TB via microSD Battery: 10,850mAh Fast Charging: USB-C 33W Rear Camera: 50MP Front Camera: 16MP UHF Radio: 2W analogue DMR: Digital Mobile Radio SIM: Dual Nano SIM Wi-Fi: 2.4G / 5G Bluetooth: 4.2 Navigation: GPS, GLONASS, BeiDou and Galileo Water/Dust Protection: IP68 / IP69K Military Certification: MIL-STD-810H HEMA Maps: Supported

The ALPINE iNE-AX809-H is a premium 9-inch multimedia head unit designed to deliver an exceptional in-car entertainment, navigation and audio experience. Featuring a laminated HD touchscreen, advanced Alpine OS and Qualcomm Snapdragon 665 processing, it provides fast, responsive operation with an intuitive interface. With Hi-Res Audio and LDAC technology, the iNE-AX809-H delivers detailed, high-quality sound from compatible USB sources and smartphones. Its extensive sound tuning capabilities, including a 48-band parametric EQ, DSP processing, time alignment, crossover controls and Bass Engine SQ, allow the audio system to be precisely configured to suit your vehicle and listening preferences. HEMA Navigation The iNE-AX809-H includes HEMA off-road mapping with 3 years of free map updates, providing detailed navigation for on-road and off-road travel across Australia. HEMA mapping features topographic information, route planning, track difficulty data, campsites and points of interest to help you confidently plan your next adventure. Detailed on-road and off-road navigation HEMA Explorer maps HEMA 3D Explorer maps with elevation and track information HEMA 4WD mapping Campsite and point-of-interest information Online map updates Seamless transition between on-road and off-road navigation 3 years of free HEMA map updates Note: HEMA 4WD maps are sold separately. 9-Inch Laminated HD Display The large 9-inch laminated touchscreen features a 1280 x 720 HD resolution, delivering sharp detail, vibrant colours and smooth video playback. Laminated display technology enhances brightness, contrast and visibility across different lighting conditions and viewing angles, creating a premium cinematic experience directly from the dashboard. Advanced Alpine Operating System The advanced Alpine OS is designed for speed, stability and intuitive operation. Its clean interface provides seamless access to audio, maps and connected applications while delivering fast boot-up and responsive touch interaction. Onboard Applications The iNE-AX809-H features pre-loaded applications for navigation, music, video and entertainment. Enjoy convenient access to communication and entertainment without relying entirely on a mobile phone, with the ability to customise the system or add compatible applications via USB. Advanced Audio Tuning Fine-tune your in-car audio with the advanced 48-band parametric EQ. The system provides detailed control over frequency response, cabin acoustics and sound staging, allowing you to create an audio profile tailored to your vehicle and listening preferences. 48-band parametric EQ per channel AKM7739 DSP chip 6-channel time alignment Front, rear and subwoofer crossovers Bass Engine SQ 3D Virtual Surround Virtual Centre channel Dynamic fader and balance control EQ preset options Optical audio output 3D Virtual Surround The 3D Surround mode and Virtual Centre channel create a wider and more immersive sound experience from standard stereo systems. The Virtual Centre function can enhance dialogue clarity without requiring a dedicated centre speaker, while multiple output options allow the system to be configured for different speaker and subwoofer setups. Bass Engine SQ Bass Engine SQ enhances low-frequency performance by adjusting multiple audio parameters simultaneously, including EQ presets, subwoofer levels, crossover frequencies and Media Xpander settings for a balanced and dynamic sound. Timing Alignment Time Alignment supports up to 5.1 or 6-channel systems, allowing individual speaker timing to be adjusted so sound reaches the listener simultaneously. This helps create a more accurate, cohesive and immersive soundstage. Connectivity and Entertainment The iNE-AX809-H provides extensive connectivity for music, video and communication. Built-in Bluetooth 5.0 supports hands-free calling and wireless audio streaming, while dual USB inputs provide flexible connectivity for compatible devices and media. Dual USB inputs Bluetooth 5.0 HDMI AUX input AV input and output Dual camera inputs PAL/AHD rear camera support Radio tuner with RDS MirrorLink Steering wheel control learning Steering Wheel Control Learning The built-in steering wheel control learning function allows compatible resistive steering wheel buttons to be programmed for functions such as volume, track selection, phone answering and voice commands. Vehicles using CAN-BUS or other communication protocols may require a third-party adapter. In-Built Bluetooth and Hands-Free Calling Built-in Bluetooth provides convenient wireless connection for hands-free phone calls and audio streaming. Voice control can also be accessed through the included external microphone for easier operation while driving. HDMI Output The HDMI output allows compatible external displays to receive high-definition video and audio content from the head unit, providing additional entertainment options for your vehicle. 360-Degree Camera Compatibility The iNE-AX809-H is compatible with Alpine's 360-degree virtual camera system, providing an interactive view of the vehicle's surroundings. The viewing angle can be panned directly from the touchscreen, helping improve visibility and awareness when manoeuvring. The system also supports customisable 3D vehicle models, including different vehicle shapes, paint colours and finishes for a more personalised viewing experience. Key Specifications Screen: 9-inch (229 mm) laminated touchscreen Resolution: 1280 x 720 HD Processor: Qualcomm Snapdragon 665, 2.0 GHz Memory: 8 GB RAM / 256 GB ROM CPU: 8-core Bluetooth: 5.0 USB Inputs: 2 AUX Input: 1 Camera Inputs: 2 Pre-Outs: 6 – Front, Rear and Subwoofer Built-in Amplifier: 16W RMS x 4 Time Alignment: 6-channel EQ: 48-band parametric per channel Crossovers: Front, Rear and Subwoofer Audio Formats: AAC, FLAC, MP3, WMA Video Formats: AVC, FLV, H.264, MP4, MPEG-4, MKV, MOV Camera Support: PAL / AHD HEMA Off-Road Maps: Included with 3 years of free map updates

The ALPINE iNE-AX809-10-H is a premium 10.1-inch multimedia head unit designed to deliver an exceptional in-car entertainment, navigation and audio experience. Featuring a laminated HD touchscreen, Alpine OS and powerful Qualcomm Snapdragon 665 processing, it provides fast, responsive operation with a clean and intuitive interface. With Hi-Res Audio and LDAC technology, the iNE-AX809-10-H delivers detailed, high-quality sound from compatible USB sources and smartphones. Extensive audio tuning features, including a 48-band parametric EQ, DSP processing, time alignment, crossover controls and Bass Engine SQ, allow the system to be precisely configured to suit your vehicle and listening preferences. HEMA Navigation The iNE-AX809-10-H provides detailed mapping for on-road and off-road travel. HEMA mapping features include topographic information, route planning, track difficulty information, campsites and points of interest, helping you confidently plan your next adventure. Detailed on-road and off-road navigation HEMA Explorer mapping 3D mapping with elevation and track information HEMA 4WD mapping capability Campsite and point-of-interest information Online map updates Seamless transition between on-road and off-road navigation Note: HEMA 4WD maps are sold separately. 10.1-Inch Laminated HD Display The large 10.1-inch laminated touchscreen features a 1280 x 720 HD resolution, delivering sharp detail, vibrant colours and smooth video playback. The laminated construction improves visibility and contrast across different lighting conditions and viewing angles, creating a premium display experience directly from the dashboard. Advanced Alpine Operating System The advanced Alpine OS provides fast boot-up, responsive touch controls and easy access to audio, navigation, video and connected applications. Pre-loaded applications provide convenient access to entertainment and communication, while additional applications can be added via USB. Advanced Audio Tuning The iNE-AX809-10-H provides extensive sound adjustment capabilities for audio enthusiasts who want greater control over their system. 48-band parametric EQ per channel AKM7739 DSP 6-channel time alignment Front, rear and subwoofer crossovers Bass Engine SQ 3D Virtual Surround Virtual Centre channel Dynamic fader and balance controls EQ presets Optical audio output Time alignment allows individual speaker timing to be adjusted so sound reaches the listening position more accurately, helping create a cohesive and immersive soundstage. Connectivity and Entertainment Stay connected with a comprehensive range of inputs and wireless features. Built-in Bluetooth 5.0 supports hands-free calling and music streaming, while dual USB inputs provide convenient access to compatible media and devices. The system supports a wide range of audio and video formats, including FLAC, MP3, WMA, AAC, WAV, OGG, MP4, MKV and more. HDMI AUX input AV input and output Dual camera inputs PAL/AHD rear camera support Bluetooth 5.0 Dual USB inputs Radio tuner with RDS Steering wheel control learning Steering Wheel Control Learning The built-in steering wheel control learning function allows compatible resistive steering wheel buttons to be assigned to functions such as volume, track selection, phone controls and voice commands. Vehicles using CAN-BUS or other communication protocols may require a third-party adapter. 360-Degree Camera Compatibility The iNE-AX809-10-H is compatible with Alpine's 360-degree virtual camera system, providing an interactive view around the vehicle. Users can pan through the surrounding view directly from the touchscreen, improving visibility and awareness when manoeuvring. The system also supports customisable 3D vehicle models and colour options for a more personalised viewing experience. Key Specifications Screen: 10.1-inch (257 mm) laminated touchscreen Resolution: 1280 x 720 HD Processor: Qualcomm Snapdragon 665, 2.0 GHz Memory: 8 GB RAM / 256 GB ROM CPU: 8-core Bluetooth: 5.0 USB Inputs: 2 AUX Input: 1 Camera Inputs: 2 Pre-Outs: 6 – Front, Rear and Subwoofer Built-in Amplifier: 16W RMS x 4 Time Alignment: 6-channel EQ: 48-band parametric per channel Audio Formats: AAC, FLAC, MP3, WMA Video Formats: AVC, FLV, H.264, MP4, MPEG-4, MKV, MOV Camera Support: PAL / AHD HEMA 4WD Maps: Sold separately

Performance Gain: Up to 33kW / 84Nm Maximise the capability of your Ineos Grenadier (2025+) with the TORQIT Power Module (CRMQ2073). Purpose-built for the latest Grenadier platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By extracting more usable energy from every drop of fuel, it enhances both on-road refinement and off-road performance while maintaining factory reliability. Whether you're tackling remote touring, technical off-road tracks or towing a caravan, trailer or boat, the additional power and torque provide greater pulling performance while reducing engine strain under load. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 33kW & 84Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing caravans, trailers, boats and heavy loads Ideal for touring, off-road adventures and everyday driving Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 33kW / 58Nm Take your Toyota Prado 2.8L Gen 3 (08/2020+) to the next level with the TORQIT Power Module (CRMQ2004). Specifically engineered for the latest 2.8L turbo diesel Prado, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module refines the engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery across the rev range. By unlocking additional performance while maintaining factory reliability, it provides a more enjoyable and capable driving experience in all conditions. Whether you're towing a caravan, camper trailer or boat, exploring remote tracks or commuting every day, the additional power and torque reduce engine strain and provide greater pulling performance when you need it most. Installation is quick and completely plug-and-play, with no permanent modifications required. Why Choose the TORQIT Power Module? Performance Gain: Up to 33kW & 58Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and everyday driving Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 47kW / 104Nm Transform the performance of your Toyota LandCruiser 300 Series (2016+) with the TORQIT Power Module (CRMQ2002). Engineered specifically for the LandCruiser 300 Series, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is noticeably improved drivability while maintaining the reliability and refinement expected from the LandCruiser platform. Whether you're towing a large caravan, horse float or boat, exploring Australia's toughest off-road terrain, or covering long-distance touring kilometres, the substantial increase in power and torque reduces engine strain and provides greater confidence under load. Installation is quick and completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 47kW & 104Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and everyday driving Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 35kW / 107Nm Unlock the full potential of your Toyota Hilux 2.8L Gen 3 (08/2020+) with the TORQIT Power Module (CRMQ2003). Purpose-built for the latest 2.8L turbo diesel Hilux, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is a more responsive, capable and enjoyable driving experience while maintaining the factory reliability of your Hilux. Whether you're towing a caravan, camper trailer or boat, carrying heavy loads for work, or heading off-road, the significant increase in torque reduces engine strain and provides stronger pulling power when you need it most. Installation is quick and completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 35kW & 107Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats, off-road touring and work vehicles Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 38kW / 82Nm Unlock the full performance of your Ford Ranger Raptor Next Gen 3.0L with the TORQIT Power Module (CRMQ2011). Purpose-built for the latest Ranger Raptor, this advanced plug-and-play performance module safely enhances power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. Designed to maximise engine efficiency, the TORQIT Power Module optimises the air-to-fuel ratio to extract more usable energy from every drop of fuel. The result is stronger acceleration, sharper throttle response and smoother power delivery, giving you greater confidence both on the road and across challenging off-road terrain. Whether you're towing a caravan, trailer, boat or carrying heavy loads, the additional torque helps minimise engine strain while improving overall drivability. From daily commuting to weekend adventures, you'll benefit from enhanced pulling power, improved responsiveness and a more refined driving experience. Why Choose the TORQIT Power Module? Performance Gain: Up to 38kW & 82Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific tuning for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and horse floats Developed and rigorously tested for Australian conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 56kW / 67Nm Unlock the full capability of your Ford Ranger Next Gen V6 with the TORQIT Power Module (CRMQ2010). Designed specifically for the latest V6 Ranger, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU signals—without requiring ECU remapping. Installed inline with your vehicle's factory sensors, the TORQIT Power Module fine-tunes engine performance while preserving your factory settings. By optimising the air-to-fuel ratio, it extracts more energy from every drop of fuel, delivering stronger acceleration, improved throttle response and smoother power delivery throughout the rev range. Whether you're towing a caravan, trailer, boat or carrying heavy work equipment, the additional power and torque reduce engine strain while providing greater pulling power and improved drivability. Best of all, the module can be removed at any time without permanently modifying your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 56kW & 67Nm* Simple plug-and-play installation with no ECU remapping required No permanent modifications to your vehicle Can be removed without affecting factory ECU settings Increases power, torque and throttle response Improves fuel efficiency through optimised engine performance Vehicle-specific calibration for safe and reliable operation Reduces engine strain when towing caravans, trailers, boats and horse floats Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 31kW / 85Nm Unlock the full potential of your Toyota Tundra with the TORQIT Power Module (CRMQ2060). Specifically engineered for the Toyota Tundra, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. By refining the engine's air-to-fuel ratio, the TORQIT Power Module improves combustion efficiency to deliver stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is a more responsive driving experience with enhanced performance for both everyday driving and demanding towing applications. Whether you're towing a large caravan, boat, horse float or heavy trailer, the additional torque helps reduce engine strain while providing greater pulling power and improved confidence on steep inclines and long highway journeys. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle. Why Choose the TORQIT Power Module? Performance Gain: Up to 31kW & 85Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and commercial towing applications Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 34kW / 77Nm Enhance the capability of your Toyota Hilux 2.8L D4D (2016–2018) with the TORQIT Power Module (CRMQ2005). Specifically engineered for the 2.8L D4D turbo diesel engine, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module precisely adjusts the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By unlocking additional performance while maintaining factory reliability, it transforms the way your Hilux performs both on and off the road. Whether you're towing a caravan, trailer or boat, carrying heavy tools for work, or heading off-road, the increased torque helps reduce engine strain and provides greater pulling power when it matters most. Installation is completely plug-and-play, with no permanent modifications required. Why Choose the TORQIT Power Module? Performance Gain: Up to 34kW & 77Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats, off-road touring and work vehicles Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 61kW / 103Nm Experience a significant performance upgrade with the TORQIT Power Module (CRMQ2001) for the Toyota LandCruiser 200 Series (2016+). Purpose-built for the LandCruiser's turbo diesel engine, this premium plug-and-play performance module safely delivers increased power, torque and improved fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module enhances the engine's air-to-fuel ratio to maximise combustion efficiency, resulting in stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. Whether driving around town or tackling long-distance touring, you'll enjoy improved drivability without compromising factory reliability. Perfect for towing large caravans, boats, horse floats or heavy work trailers, the substantial increase in power and torque helps reduce engine strain while providing greater pulling performance on steep inclines and challenging terrain. Installation is completely plug-and-play, requiring no cutting, wiring or permanent modifications. Why Choose the TORQIT Power Module? Performance Gain: Up to 61kW & 103Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and commercial applications Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 36kW / 75Nm Boost the performance of your Isuzu D-MAX 4JJ3 3.0L (Post-2020) with the TORQIT Power Module (CRMQ2006). Specifically engineered for the latest 3.0L turbo diesel D-MAX, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery across the rev range. By extracting more usable energy from every drop of fuel, it enhances everyday drivability while maintaining the reliability expected from the Isuzu 4JJ3 engine. Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque reduces engine strain and provides greater pulling power when you need it most. From daily commuting to off-road adventures, the TORQIT Power Module delivers a noticeable improvement in performance without requiring permanent vehicle modifications. Why Choose the TORQIT Power Module? Performance Gain: Up to 36kW & 75Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing caravans, trailers, boats and heavy loads Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 36kW / 75Nm Maximise the capability of your Toyota LandCruiser 79 Series (2016+) with the TORQIT Power Module (CRMQ2000). Purpose-built for the iconic 79 Series turbo diesel, this premium plug-and-play performance module safely delivers increased power, torque and improved fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module precisely adjusts the engine's air-to-fuel ratio to enhance combustion efficiency, producing stronger acceleration, improved throttle response and smoother power delivery throughout the rev range. The result is a more responsive LandCruiser that maintains factory reliability while offering noticeably improved performance on and off the road. Whether you're towing heavy trailers, transporting equipment on the job site or tackling Australia's toughest off-road tracks, the additional torque helps reduce engine strain and delivers greater pulling power when you need it most. Installation is fast and completely plug-and-play, requiring no cutting, wiring or permanent modifications. Why Choose the TORQIT Power Module? Performance Gain: Up to 36kW & 75Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for touring, towing, off-road adventures and commercial applications Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 34kW / 75Nm Upgrade your Nissan Navara NP300 (Post-2019) with the TORQIT Power Module (CRMQ2008), a premium plug-and-play performance module engineered to deliver increased power, torque and fuel efficiency. Designed specifically for the latest Navara NP300 models, it safely optimises your vehicle's factory ECU calibration without requiring permanent modifications. By refining the engine's air-to-fuel ratio, the TORQIT Power Module extracts more usable energy from every drop of fuel, resulting in stronger acceleration, sharper throttle response and smoother power delivery. Whether you're commuting, exploring off-road tracks or using your Navara for work, you'll enjoy improved drivability and a more responsive driving experience. For drivers who regularly tow caravans, trailers, boats or heavy equipment, the additional torque helps reduce engine strain while providing greater pulling power and improved confidence on steep inclines and long-distance trips. The plug-and-play design allows for quick installation while maintaining your vehicle's factory integrity. Why Choose the TORQIT Power Module? Performance Gain: Up to 34kW & 75Nm* Simple plug-and-play installation with no permanent vehicle modifications Optimises fuel efficiency while increasing power and torque Improves throttle response and overall drivability Vehicle-specific calibration for safe and reliable performance Reduces engine strain when towing heavy loads Ideal for caravans, trailers, boats and horse floats Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.

Performance Gain: Up to 31kW / 61Nm Enhance the performance of your Mazda BT-50 4JJ3 (Post-2020) with the TORQIT Power Module (CRMQ2009). Specifically engineered for the latest BT-50 platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration. The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, improved throttle response and smoother power delivery across the entire rev range. By extracting more usable energy from every drop of fuel, you'll enjoy improved performance without compromising everyday reliability. Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque helps reduce engine strain and provides greater pulling power when you need it most. From daily driving to off-road adventures, the TORQIT Power Module delivers a more responsive and enjoyable driving experience. Why Choose the TORQIT Power Module? Performance Gain: Up to 31kW & 61Nm* Simple plug-and-play installation with no permanent vehicle modifications Improves power, torque and throttle response Enhances fuel efficiency through optimised engine performance Vehicle-specific tuning for safe and reliable operation Reduces engine strain when towing caravans, trailers, boats and horse floats Developed and rigorously tested for Australian driving conditions Backed by a 5-year manufacturer's warranty *Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.