FRONT RUNNER Slimpro Van Rack Kit Fits Ram Pro Master...
$2,101.50
$2,335.00
Compatible with RAM Pro Master 1500 (118" WB) (2014-Current) low roof vans with a vehicle length of 4973mm / 195.8".
Load-carrying area: 2570mm (101.2") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVRP001T - RAM Pro Master 1500 (118" WB/Low Roof) (2014-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF002 - FPCR Foot Set - by Front Runner
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1475 - Narrow Slat / 1475mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2570mm (101.2") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 30.99kg (68.32lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 35.35kg (78lbs)
FRONT RUNNER Ram Pro Master 1500 (136In Wb/High Roof) (2014-Current)...
$2,173.50
$2,415.00
Securely mount the Front Runner Easy-Out Awning, as well as other popular awning brands, to the Slimline II Roof Rack. This no drill, off-road tough mounting solution offers a refined alternative to the ugly and bulky galvanized L brackets.
These strong brackets are powder coated black with the same weather resistant finish as all Front Runner accessories.
Consists of:3x Brackets1x Nuts and Bolts kitProduct Dimensions:49mm (1.92") L x 128mm (5.03") W x 87.5mm (3.44") HWeight:1.36kg (2.99lbs)Materials used:3mm (0.118") Black powder coated steel
FRONT RUNNER Ram Pro Master 1500 (136In Wb/Low Roof) (2014-Current)...
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for RAM Pro Master vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with RAM Pro Master 1500 (136" WB/Low Roof) (2014-Current) low roof vans with a vehicle length of 5427mm / 213.7".
Load-carrying area: 2974mm (117.1") L x 1565mm (61.6") W.
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 35.35kg (78lbs)
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Hilux...
$1,107.00
$1,230.00
This 954mm/37.6" long, full-size, Slimline II Roof Rack Kit contains the Slimline II Tray, Wind Deflector, two (2) Tracks, and four (4) Feet to mount the Slimline II Tray to your 2016-Current Toyota Hilux Revo Extra Cab.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty.*
Note: Drilling is required for installation.
Features
KRTH019T - Toyota Hilux Revo Extra Cab (2016-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FASS012 - Foot Set / 40mm - 50mm
1x FASS015 - Foot Set Angled / 75mm
1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L)
1x TRTH007 - Toyota Revo Extra Cab (2016-Current) Tracks
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 20.25kg (44.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 22kg (48lbs)
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota Quantum...
$2,727.00
$3,030.00
This 2272mm/89.5" long full-size Slimline II cargo carrying roof rack kit for the Toyota Quantum/HiAce Low Roof contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTQ005L - Toyota Quantum Low Roof (2004-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
4 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 43kg (94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 620mm (24")
Length 1635mm (64")
Height 160mm (6")
Shipping Weight:
Weight 49.7kg (109.3lbs)
FRONT RUNNER Ram Pro Master 2500 (136 Wb/Low Roof) (2014-Current)...
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for RAM Pro Master vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with RAM Pro Master 2500 (136” WB) (2014-Current) Low Roof vans with a vehicle length of 5427mm / 213.7".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 190mm (7")Shipping Weight:Weight: 36.35kg (80lbs)
FRONT RUNNER Ram Pro Master 2500 (136 Wb/High Roof) (2014-Current)...
$2,173.50
$2,415.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for RAM Pro Master vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with RAM Pro Master 2500 (136” WB) (2014-Current) high roof vans with a vehicle length of 5427mm / 213.7".
Load-carrying area: 2974mm (117.1") x 1565mm (61.6").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FAVF002 - FPCR Foot Set - by Front Runner1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps4x RRNS1475 - Narrow Slat / 1475mm (Pair)1x SPVT002 - Van Rack Side Profile / 1358mm1x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Assembled Rack Kit Dimensions:2974mm (117.1") L x 1565mm (61.6") W x 127mm (5") H
Approximate Installed Weight: 31.49kg (69.42lbs)
RAM Pro Master Van Rack Kit heights are adjustable from 80mm (Z bracket inverted) to 130mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat.
The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:Width: 300mm (12")Length: 1805mm (71")Height: 195mm (8")Shipping Weight:Weight: 36.95kg (81lbs)
FRONT RUNNER Load Bar Kit Gutter Mount Fits Toyota Quantum...
$502.20
$558.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTQ004 - Toyota Quantum (2004-2018) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 119mm (5")
Length 1551mm (61")
Height 178mm (7")
Shipping Weight:
Weight 8.9kg (19.7lbs)
FRONT RUNNER Jeep Cherokee Sport Xj Slimline Ii Roof Rack...
$1,933.20
$2,148.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.65kg (67.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 35.26kg (78lbs)
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Rsi Smart Canopy Slimline...
$1,399.50
$1,555.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Jeep Gladiator JT RSI Smart Canopy contains a Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.65kg (54.34lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 155mm (6")Shipping Weight:Weight: 25kg (55lbs)
FRONT RUNNER Ford Ranger T6 Winch Plate - WPFR001
$526.50
$585.00
A heavy duty winch plate that allows you to securely fasten a winch to your Ford Ranger T6's chassis, behind the original bumper. This easy to install plate supports most popular winch brands and sizes.
Specifically designed for the Ford Ranger T6.
Supports all popular winch sizes (8 000lbs (3.6t) - 10 000lbs (4.5t)).
Bolts directly to vehicle chassis with supplied hardware.
Fitted behind the original factory bumper, the winch plate and winch is hidden.
Allows access to the winch free spool lever.
Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.
*Please Note: This Winch Plate does not work with Ford Ranger T6 models with Tech Pak Adaptive Cruise Control and Wildtrak models.
Consists of:1 x Winch PlateHardware KitFitting InstructionsMaterials used:Black powder coated 8mm mild steelProduct Dimensions:210mm (8.3") L x 971mm (38.2") W x 195mm (7.7") HWeight:17.6Kg (38.8lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak Double Cab W/Oem Roll...
$1,467.00
$1,630.00
This kit creates a full-size rack that sits above your Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Ford Ranger T6.2 DOES NOT have a standard OEM Roll Top, Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline II Load Bed Rack Kit is available.
Features
KRFR024T - Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit
Consisting of:
3x FASS016 - Flat Feet (pair) / 65mm
3x RRAC962 - Track Mount Stud Plate
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.94kg (52.78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Length = 1720mm
Width = 1445mm
Height = 250mm
Shipping Weight:
Weight = 29kg
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline Ii Load...
$1,898.10
$2,109.00
This kit creates a full-size rack that sits above your Ford Ranger Truck's load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm), 2 Load Bed Mounts, and 6 Pickup Legs that fit into the Load Bed Mounts.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Ford Ranger T6.2 comes standard with the OEM Roll Top, Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit is available.
Features
KRFR025T - Ford Ranger T6.2 (2022-Curr)SLII Load Bed Rack Kit
Consisting of:
3x LASS026 - Universal Load Bed Leg / Tall (Pair)
1x LASS046 - Ford Rngr T6.2 (22-Curr) Ld bd rck mount system
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 33.7kg (74.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 295mm (12")
Shipping Weight:
Weight: 39kg (86lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro...
$2,408.40
$2,676.00
Get ready to massively up the gear-carrying capacity in the load bed area of your Ford Ranger T6.2 with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor load bed.
Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Ford Ranger T6.2 Wildtrak/Raptor with specific mounting brackets bolted to the existing factory mounting points.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
PBFR002T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBFR002S - Ford Ranger T6.2 Next Gen (2023-Current) Pro Bed S
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 70.63kg (155.71lbs)
Shipping Dimensions:
Width: 460mm (18")
Length: 1720mm (68")
Height: 640mm (25")
Shipping Weight:
Weight: 83kg (183lbs)
FRONT RUNNER Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro...
$1,081.80
$1,202.00
This tough, lightweight steel and aluminum cargo system secures to the load bed of your Ford Ranger T6.2 Wildtrak/Raptor Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit several accessories to its sides or even a Front Runner rack. These include molle panels, storage boxes or recovery tracks. With this incredible cargo system, you can pack all the necessary overland, camping or sports gear.
This Pro Bed System is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Ford Ranger T6.2 Wildtrak/Raptor Double Cab with specific mounting brackets bolted to the existing factory mounting points.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
Features
PBFR002S - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBFR002 - Ford Ranger T6 Wildtrak Raptor (22-Current) Pro
1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 49.86kg (109.92lbs)
Shipping Dimensions:
Width: 640mm (25")
Length: 1280mm (50")
Height: 460mm (18")
Shipping Weight:
Weight: 52kg (114lbs)
FRONT RUNNER Ford Ranger T6/Wildtrak 3Rd Gen (2012-2019) Slimline Ii...
$1,489.50
$1,655.00
This 1358mm/53.5 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Ranger T6/Wildtrak 3rd Gen (2012-2019). Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFR007T - Ford Ranger T6/Wildtrak 3rd Gen (2012-2019) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFR003 - Ford Ranger T6/Wildtrak (2012-2019) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.91kg (63.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 30kg (66lbs)
FRONT RUNNER Ford Ranger T6/Wildtrak/Raptor (2012-2022) Slimline Ii Roof Rack...
$1,498.50
$1,665.00
This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
An opening on the Foot Rails allows access to Front Runner Under Rack Mount Tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the Fitment Guide in the Install tab.
Drilling is required for installation.
Features
KRFR012T - Ford Ranger T6/Wildtrak/Raptor (2012-2022) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFR005 - Ford RangerT6/Wildtrak/Raptor(2012-2022)Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.91kg (63.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 29kg (64lbs)
FRONT RUNNER Ford Ranger Wildtrak (2014-2022) Roll Top Slimline Ii...
$1,598.40
$1,776.00
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT032T - Ford Ranger Wildtrak (2014-Curr) Roll Top Slimline II Load Bed Rack Kit / Tall - by Front Runner
Consisting of:
3x LASS033 - Pick Up Roll Top Leg Mount / Tall (Pair)
3x RRAC962 - Track Mount Stud Plate
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.56kg (62.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 28.8kg (63lbs)
FRONT RUNNER Ford Ranger Wildtrak/Raptor (2012-Current) Roll Top Slimline Ii...
$1,571.40
$1,746.00
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak/Rapotor's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT016T - Ford Ranger Wildtrak/Raptor (2012-Curr) Roll Top Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
3x RRAC962 - Track Mount Stud Plate
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.51kg (60.65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 230mm (9")
Shipping Weight:
Weight: 25.91kg (57lbs)
FRONT RUNNER Ford Super Cab (2012-Current) Slimline Ii Roof Rack...
$1,342.80
$1,492.00
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford Super Cab 2012+ contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFS004T - Ford Super Cab (2012-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
1 x TRFS002 - Ford Super Cab T6 (2012-Current) Tracks / 1080mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.3kg (51.3lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1615mm (64.0")
Height: 140mm (6.0")
Shipping Weight:
26.4kg (58.0lbs)
FRONT RUNNER Ford Super Duty F-250-F-350 (1999-Current) Slimline Ii Roof...
$1,829.70
$2,033.00
This 1560mm/61.4 long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-250 Super Duty. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRFF010T - Ford Super Duty F-250-F-350 (1999-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FAFF002 - Ford F-250 F-350 (1999-Current) Foot Rails / Low
1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.75kg (67.79lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 240mm (9")
Length: 1730mm (68")
Height: 95mm (4")
Shipping Weight:
Weight: 30.6kg (67lbs)
FRONT RUNNER Ford Tourneo/Transit Custom Lwb (2013-Current) Slimline Ii Roof...
$2,870.10
$3,189.00
This 2772mm/109.1" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Tourneo/Transit Custom LWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT003T - Ford Tourneo/Transit Custom LWB (2013-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT002 - Ford Tourneo/TransitCustomLWB(2013-Curr)Foot Rails1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 54.62kg (120.42lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 53.2kg (117lbs)
FRONT RUNNER Ford Tourneo/Transit Custom Swb (2013-2022) Slimline Ii Roof...
$2,591.10
$2,879.00
This 2368mm/93.2" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Tourneo/Transit Custom SWB. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT004T - Ford Tourneo/Transit Custom SWB (2013-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT003 - Ford Tourneo_Transit CustomSWB(2013-Cur) Foot Rail
1x RRSTM12 - SLII Tray - 1475mm(W)X2368mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 48.26kg (106.39lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 49.4kg (109lbs)
FRONT RUNNER Ford Transit (L2H2/130In Wb/Medium Roof) (2013-Current) Slimpro Van...
$1,604.70
$1,783.00
Compatible with Ford Transit (L2H2/130" WB) (2013-Current) medium roof vans with a vehicle length of 5531mm / 217.8".
Load-carrying area: 2368mm (93") x 1470mm (57.9") .
Six (6) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT001T - Ford Transit (L2H2/130" WB/Medium Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
3x RRNS1425 - Narrow Slat / 1425mm (Pair)
2x SPVT001 - Van Rack Side Profile / 1156mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2368mm (93") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 26.59kg (58.62lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 29.35kg (65lbs)
FRONT RUNNER Ford Transit (L2H3/130In Wb/High Roof) (2013-Current) Slimpro Van...
$1,604.70
$1,783.00
Compatible with Ford Transit L2/H3 / 130" wheelbase high roof vans with a vehicle length of 5531mm / 217.8".
Load-carrying area: 2368mm (93") x 1470mm (57.9").
Six (6) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT002T - Ford Transit (L2H3/130" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
3x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
3x RRNS1425 - Narrow Slat / 1425mm (Pair)
2x SPVT001 - Van Rack Side Profile / 1156mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2368mm (93") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 26.59kg (58.62lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 29.35kg (65lbs)
FRONT RUNNER Ford Transit (L3H3/148In Wb/High Roof) (2013-Current) Slimpro Van...
$2,087.10
$2,319.00
Compatible with Ford Transit (L3H3/148" WB) (2013-Current) high roof vans with a vehicle length of 5981mm / 235.5".
Load-carrying area: 2974mm (117.1") x 1470mm (57.9").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT004T - Ford Transit (L3H3/148" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2974mm (117.1") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 34.45kg (75.95lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 37.35kg (82lbs)
FRONT RUNNER Ford Transit (L4H3/148In Wb/High Roof) (2013-Current) Slimpro Van...
$2,514.60
$2,794.00
Compatible with 2013-Current Ford Transit (L4H3/148" WB) High roof vans with a vehicle length of 6704mm / 263.9".
Load-carrying area: 3580mm (141") x 1470mm (57.9").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket standard configuration at 123mm (4.8").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT005T - Ford Transit (L4H3/148" WB/High Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
5x RRNS1425 - Narrow Slat / 1425mm (Pair)
2x SPVT004 - Van Rack Side Profile / 1762mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
3580mm (141") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 43.45kg (95.79lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 44.35kg (98lbs)
FRONT RUNNER Ford Transit 6Th Gen (2006-2013) Slimline Ii Roof...
$3,528.00
$3,920.00
This 2570mm/101.18" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Transit contains Slimline II Tray and Wind Deflector, as well as 10 Gutter Mount Legs for mounting the Tray to the vehicle.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
Installs easily with no drilling required.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT005T - Ford Transit 6th Gen (2006-2013) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
5x LASS103 - No 3 Leg 155mm (Pair)5x RRAC109 - Gutter Mount Leg Extensions1x RRSTP13 - SLII Tray - 1575mm(W)X2570mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 68.24kg (150.44lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1720mm (68"); Height: 270mm (11")
Shipping Weight:
Weight: 70kg (154lbs)
FRONT RUNNER Ford Transit Passenger Van Xlt (2013-Current) Slimline Ii...
$1,606.50
$1,785.00
This 1156mm/45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains the Slimline II Tray, Wind Deflector, and 4 foot rails to mount the Slimline II Tray to your Ford Transit Passenger Van XLT. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRFT002T - Ford Transit Passenger Van XLT (2013-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT001 - Ford Transit Passenger Van XLT (2013-Current) Foot Rails
1x RRSTM06 - SLII Tray - 1475mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 31.96kg (70.46lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 300mm (12")
Shipping Weight:
Weight: 32.14kg (71lbs)
FRONT RUNNER Ford Transit Passenger Van Xlt (2013-Current) Slimline Ii...
$2,749.50
$3,055.00
This 2772mm/109.1" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your Ford Transit Passenger Van XLT (USA 148 SPEC) (Euro L3H2 & L3H3 Spec). Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Suitable for Transit Passenger Van XL /XLT 148 WB (length 236') H1 /H2.
Features
KRFT001T - Ford Transit Passenger Van XLT (2013-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFT001 - Ford Transit Passenger Van XLT (2013-Current) Foot Rails
1x RRSTM14 - SLII Tray - 1475mm(W)X2772mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 50.33kg (110.96lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 51.6kg (114lbs)
FRONT RUNNER Ford/Mazda T6/T7 (2012-2022) Load Bar Kit / Track...
$576.00
$640.00
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 50mm Feet, 2 60mm Feet, 2 1255mm Load Bars, 2 Ford Ranger 1200mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.
These Load Bars are mounted to the vehicles roof via a set of supplied Tracks and Track Mounted Feet.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRFM013 - Ford/Mazda T6/T7 (2012-2022) Load Bar Kit / Track & Feet - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner
1 x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 250mm (10")
Length 1360mm (54")
Height 110mm (4")
Shipping Weight:
Weight 9.3kg (20.5lbs)
FRONT RUNNER Gmc Canyon (2015-2022) Slimline Ii Roof Rack Kit...
$1,493.10
$1,659.00
This 1358mm/53.5 long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRGC001T - GMC Canyon (2015-2022) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FACC001 - Chev Colorado/GMC Canyon (2015-2022) Foot Rails - by Front Runner
1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1615mm (64")
Height 245mm (10")
Shipping Weight:
Weight 30.1kg (66.2lbs)
FRONT RUNNER Gmc Canyon Roll Top 5.1' (2015-Current) Slimline Ii...
$1,800.00
$2,000.00
This kit creates a full-size rack that sits above your GMC Canyons Roll Top (2015-present) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Pickup Truck Roll Top Leg Mounts that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRGC002T - GMC Canyon Roll Top 5.1' (2015-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount
1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm
1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)
1x TRBU002 - Pick-Up Load Bed Tracks / 1200mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 31.41kg (69.25lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18")
Length: 1730mm (68")
Height: 280mm (11")
Shipping Weight:
Weight: 34.63kg (76lbs)
FRONT RUNNER Gmc Sierra 1500 (2007-Current) Slimline Ii Load Bed...
$2,244.60
$2,494.00
This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1762mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRGM009T - GMC Sierra 1500 (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)
1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.9kg (85.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18.0")
Length: 1730mm (68.0")
Height: 290mm (11.0")
Shipping Weight:
39.4kg (87.0lbs)
FRONT RUNNER Gmc Sierra 1500 / Short Load Bed (2007-Current)...
$2,028.60
$2,254.00
This kit creates a full-size rack that sits above your GMC Sierra 1500 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Features
KRGM008T - GMC Sierra 1500 / Short Load Bed (2007-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L)
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.3kg (77.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18.0")
Length: 1730mm (68.0")
Height: 285mm (11.0")
Shipping Weight:
35.8kg (79.0lbs)
FRONT RUNNER Gmc Sierra Crew Cab (2014-Current) Double Load Bar...
$709.20
$788.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGM011 - GMC Sierra Crew Cab (2014-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner
1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 11.7kg (25.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 1685mm (66.0")
Length: 125mm (5.0")
Height: 310mm (12.0")
Shipping Weight:
11.6kg (26.0lbs)
FRONT RUNNER Gmc Sierra Crew Cab (2014-Current) Triple Load Bar...
$953.10
$1,059.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGM013 - GMC Sierra Crew Cab (2014-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner
1 x TRBU003 - Bakkie Load Bed Tracks / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 16.1kg (35.6lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 1685mm (66.0")
Length: 125mm (5.0")
Height: 385mm (15.0")
Shipping Weight:
15.6kg (34.0lbs)
FRONT RUNNER Gmc Sierra Crew Cab / Short Load Bed...
$691.20
$768.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab / Short Load Bed. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGM010 - GMC Sierra Crew Cab / Short Load Bed (2014-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 11.4kg (25.2lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 1685mm (66.0")
Length: 125mm (5.0")
Height: 315mm (12.0")
Shipping Weight:
11.0kg (24.0lbs)
FRONT RUNNER Gmc Sierra Crew Cab / Short Load Bed...
$935.10
$1,039.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your GMC Sierra Crew Cab / Short Load Bed. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGM012 - GMC Sierra Crew Cab / Short Load Bed (2014-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner
1 x TRBU002 - Bakkie Load Bed Tracks / 1200mm(L) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 15.9kg (35.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 1685mm (66.0")
Length: 125mm (5.0")
Height: 385mm (15.0")
Shipping Weight:
15.2kg (33.0lbs)
FRONT RUNNER Holden Colorado/Gmc Canyon Dc (2012-Current) Slimline Ii Roof...
$1,412.10
$1,569.00
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your 2012+ Holden Colorado/GMC Canyon Double Cab. It easily installs using the existing factory mounting points. Drilling is model dependent.
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your 2012+ Holden Colorado/GMC Canyon Double Cab. It easily installs using the existing factory mounting points. Drilling is model dependent.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:
1 x FAIK001 - Isuzu D-Max Foot Rails - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (52lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 630mm (25")Length 1640mm (65")Height 160mm (6")
Shipping Weight:
Weight 27.5kg (60.4lbs)
FRONT RUNNER Jeep Cherokee Sport Load Bar Kit /Gutter Mount...
$468.00
$520.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRJC006 - Jeep Cherokee Sport Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1445mm (57")
Height 175mm (7")
Shipping Weight:
Weight 8.2kg (18.1lbs)
FRONT RUNNER Jeep Cherokee Sport Xj Slimline Ii Roof Rack...
$1,916.10
$2,129.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJC002L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight 30kg (67lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 35.2kg (77.5lbs)
FRONT RUNNER Jeep Cherokee Sport Xj Slimline Ii Roof Rack...
$1,933.20
$2,148.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.65kg (67.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 35.26kg (78lbs)
FRONT RUNNER Jeep Gladiator (2019-Current) Fold-Top Slimline Ii Bed Rack...
$1,913.40
$2,126.00
This kit creates a full-size rack that sits above your Jeep Gladiator's truck bed with a Fold-Top cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 6 Pickup Roll Top/Top Mount Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRJG013T - Jeep Gladiator (2019-Current) Fold-Top Slimline II Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRAC002 - Universal Track / 1400mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.95kg (72.64lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 280mm (11")
Shipping Weight:
Weight: 34kg (75lbs)
FRONT RUNNER Jeep Gladiator (2019-Current) Pro Bed Rack Kit -...
$2,405.70
$2,673.00
Up your Jeep Gladiator's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the load bed of your Jeep. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Jeep Gladiator load bed.
Included in this Kit is the a 1225mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories,Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and the bed of your truck.
Secures to the bed of the Jeep Gladiator with specific mounting brackets bolted to the existing factory mounting points.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
PBJG001T - Jeep Gladiator (2019-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 101.86kg (224.56lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1720mm (68")
Height: 510mm (20")
Shipping Weight:
Weight: 112kg (246lbs)
FRONT RUNNER Jeep Gladiator (2020-Current) Egr Rolltrac Load Bed Load...
$528.30
$587.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Jeep Gladiator when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1345mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT012 - Jeep Gladiator (2020-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK015 - Roof Load Bar Pair 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.66kg (16.89lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1460mm (57"); Height: 165mm (6")
Shipping Weight:
Weight: 8.2kg (18lbs)
FRONT RUNNER Jeep Gladiator (2020-Current) Egr Rolltrac Slimline Ii Load...
$1,626.30
$1,807.00
This kit creates a full-size rack that sits above your Jeep Gladiator's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT044T - Jeep Gladiator (2020-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.55kg (62.94lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 240mm (9")
Shipping Weight:
Weight: 28.8kg (63lbs)
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Cab Over Camper Slimline...
$1,674.90
$1,861.00
This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Please see the fitment instructions in the INSTALL tab for further installation information.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJG016T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini
1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 22.24kg (49.03lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 325mm (13")
Shipping Weight:
Weight: 31kg (68lbs)
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Extreme Slimline Ii Roof...
$2,235.60
$2,484.00
This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep Gladiator JT including the Slimline II Tray (1425mm x 1560mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation.
This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
The Jeep Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself.
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJG014T - Jeep Gladiator JT (2019-Current) Extreme Slimline II Roof Rack Kit
Consisting of:
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x FAJT001 - Jeep Gladiatorr JT (2019-Curr) Foot Rails
1x FAJT002 - Jeep Gladiator (2019-Curr) Inner Brackets
1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 32.22kg (71.03lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 315mm (12")
Shipping Weight:
Weight: 41kg (90lbs)
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Load Bed Load Bar...
$507.60
$564.00
If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution.
This kit is designed to work with the existing Jeep Gladiator JT factory bed rails and comes with a pair of 1425mm wide Front Runner Load Bars, 2 pairs of Front Runner Tall Load Bed Legs, and all the necessary hardware required to mount to the factory bed rails.
The Front Runner Load Bar Kit features 22mm thick HD aluminum extrusions (slats) that are used in the Slimline II Roof Rack, which means that these load bars can be used as slats in a similar width Slimline II Roof Rack.
Additionally, the sliding nut t-slots on the slats allow for unlimited and ultra-secure mounting positions, and accessories and equipment can be quickly removed as well.
Features
KRJG003 - Jeep Gladiator JT (2019-Current) Load Bed Load Bar Kit
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LBSK016 - Roof Load Bar Pair 1425mm(W)1x RRAC901 - Load Bed Nut Kit- Toyota Tacoma 2004+/Tundra 2007+
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 7.57kg (16.69lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 200mm (8"); Length: 1530mm (60"); Height: 130mm (5")
Shipping Weight:
Weight: 8kg (18lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
