Lightforce
LIGHTFORCE Striker Professional Edition Led Driving Light - Twin Pack - STRIKERLEDPK
$456.30
$507.00
Get ready to illuminate your off-road adventures with the Striker Professional Edition LED Driving Lights. The latest addition to your 4x4 arsenal. At TJM Northern Beaches, we've got your back when it comes to top-quality gear, and these lights are no exception.
Striker Edition LED Driving Lights are designed and rigorously tested right here in the land Down Under, these driving lights are your ticket to conquering the rugged terrain with style, strength, and a dash of Aussie spirit.
The lights are built tough, just like you.
The TJM Northern Beaches Team take quality, safety and performance seriously. Our Striker lights meet the stringent automotive standards of the European Union and New Zealand. You can hit the trails with confidence, knowing these lights are up to the challenge.
With 15 powerful Lumileds® LEDs and a spot filter, these lights deliver an electrifying 1 lux at an impressive 754 meters. Whether you need a wide beam pattern for scanning the surroundings or a focused spotlight for pinpoint precision, the Strikers have your back.
Mount them on your roof or bullbar – these lights are designed to endure the harshest conditions Australia throws your way. With an IP68 & IP69K rating, they can handle dust and water up to 1 meter deep. The high-pressure diecast aluminium housing and UV-stable black powder-coat finish ensure they look good while doing it.
Specs and Features
IP68 and IP69k rated against dust and water up to 1 M
UV-stable black powder-coat finish
High-pressure diecast aluminium housing
The bezel provides lightweight strength
Thermal overload protection – prevents light from overheating
Gore® waterproof membrane to protect against water and dust
LED spot reflector with the ability to use a combination modular filter
15 x high-quality Lumileds LEDs that provide consistent performance
Weight: 2kg including bracket
Beam length: 1 lux @ 754m (pair)
Beam type: LED
Made in Australia
3-year warranty
What's in the Kit:
2x Striker Professional Edition LED Driving Lights with fitted mounting brackets
Clear filters
2x Reversible mounting hardware
A Lightforce single switch 8-pin adaptor
User instructions
Upgrade your off-road game with the Striker Professional Edition LED Driving Lights from TJM Northern Beaches.
When the sun sets, your adventure begins. Are you ready?
TJM Northern Beaches Expert Tip: To keep your Striker lights shining bright, perform regular checks for dust and water ingress. A quick clean and inspection can extend their lifespan and keep you adventuring with confidence.
What others are saying about this product
‘Awesome light output considering the size, definitely recommended.’
Lightforce
LIGHTFORCE Venom Professional Edition Led Driving Light - VENOMLED150
$273.60
$304.00
FEATURES:
Made in Australia
75W LED / 8820lm (raw) for industry-leading output
21 x high-quality Lumileds LEDs that provide consistent performance
LED spot reflector with the ability to use a combination modular filter
66mm slim footprint that provides multiple mounting options
3 stage operation: Full intensity, day time, or nighttime positioning options
Reverse polarity voltage protection and high current waterproof connectors
CISPR25 compliant, reduced radio frequency interference technology
Thermal overload protection prevents light from overheating
Hard-wearing UV stable powder coat finish
IP69K rated / Gore® waterproof membrane to protect against water and dust
Pressure diecast aluminium housing and bezel providing lightweight strength
Impact-resistant polycarbonate filter for added protection
3 year warranty.
PRODUCT SPECIFICATION
More Information
Distance: 1 lux at
939m (Pair)
Effective Lumens
5764
Raw Lumens
8820
Colour Temperature
5000K
CRI
70
Current Draw
5.7Amps @ 13.2V
Voltage Range
10V - 32V DC
Wattage
75W
Ingress Protection Rating
IP69K
Weight
1.2kg Including Bracket
Lightforce
LIGHTFORCE Striker Professional Edition Led Driving Light (Single Light ) - STRIKERLEDX1
$227.70
$253.00
With a stylish rectangular form factor for a cool look on any 4X4, SUV or ute, and great all-round performance, Striker LEDs are the latest Driving Lights from the leader in performance lighting.
Australian made Striker LEDs are designed to perform to our consistently high standards. Their IP68 and IP69k ingress protection rating means they can handle a creek crossing and a high-pressure washdown after an adventure. With reduced radio interference technology included, you can listen to the radio without static. And a range of modular filters lets you modify the lights to suit your driving conditions.
Made in Australia
15 x high-quality LumiLED LEDs providing consistent high performance
LED spot reflectors with the ability to use modular filters to produce a wide driving light beam pattern or flood diffusion filter for work light environment
IP68 and IP69K resistant to water and dust ingress
77mm slim footprint for multiple mounting options
Reverse polarity voltage protection and high current waterproof connectors
PCB designed with reduced electromagnetic interference
CE certified
Thermal overload protection protects the light from overheating
Hard-wearing UV stable powder-coat finish
High-pressure diecast aluminium housing and bezel providing strength and weight reduction
Impact-resistant polycarbonate filter for added protection
Genuine Gore® waterproof membrane with mechanical seal
3 year warranty
Specifications
Distance: 1 lux at: 533m
Distance: 0.25 lux at: 1066m
Effective Lumens: 3466 (Individual)
Raw Lumens: 5625 (Individual)
Colour Temperature: 5000K
CRI: 70
Current Draw: 4.4Amps @ 13.2V
Voltage Range: 10V - 36V DC
Wattage: 60W
Ingress Protection Rating: IP68, IP69K
Weight: 1Kg (Including Mounts)
What's Included
Single light contains one light,cover, and mounting hardware, no wiring harness (available separately).
1 x Striker Professional Edition LED Driving Lights (STRIKERLEDPK)
1 x Clear filters with Lightforce logo
1 x Reversible mounting hardware
1 x User instructions
Compatibility
Universal
Front Runner
FRONT RUNNER 10 Led Light Bar Vx250-Fl Mounting Bracket - RRAC212
$43.20
$48.00
Extend your best adventures into the after-hours. Easily install a 10" light bar onto your Front Runner roof rack using the 10" LED Light Bar VX250-FL Mounting Bracket.
A single bracket that secures the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light to the Front Runner Roof Rack.
Installs easily into the front, back or side profiles of your Slimline II Rack, or to the side of the Slimsport Rack.
Side guards protect the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light from potential damage caused by flying rocks and other road debris.
Works with Roof Rack Power Point (sold separately).
Fitment guide and installation hardware included.
Consists of:1 x 10" Osram Light BracketInstallation HardwareFitting Instructions Materials used:Black powder coated steelProduct Dimensions:384mm (15.1") L x 67mm (2.6) W x 44mm (1.7") HWeight:0.47kg (1lbs)
Front Runner
FRONT RUNNER 40 Led Light Bar Vx1000-Cb Sm Mounting Bracket - RRAC217
$169.20
$188.00
Securely mount your 40" LED Light Bar (VX1000-CB) to the front or underneath your Front Runner Roof Rack with this Single Mount bracket. These brackets feature a protective cover to shield the light bar against small rocks.
Two sets of brackets that secure the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount to the Front Runner Roof Rack.
Front Rack mounting brackets secure this light bar using the top T-slots of the front combined slat side profile, while the Under Rack mounting brackets secure it using the bottom T-slot of the front combined slat profile.
It comes with a robust front cover to protect the LED light bar from small rocks.
All components are made of steel and aluminum and sealed with the same durable, weather-resistant black powder coating as the Front Runner Roof Racks.
Includes all installation hardware and fitting instructions.
Consists of:1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 Front CoverInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:1070mm (42.1")L x 102mm (4")W x 58mm (2.3")HWeight:2.8kg (6.2lbs)
Front Runner
FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Rack 40 Light Bar Wind Fairing - RRAC220
$226.80
$252.00
The Slimsport Rack Wind Fairing is specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Light Bar Wind Fairing for the Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
Durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Consists of:1 x Toyota Rav4 Slimsport Rack 40" Light Bar Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1175mm (46.3") L x 178mm (7") W x 161mm (6.3") H
Weight:4.94kg (10.9lbs)
Front Runner
FRONT RUNNER 10 Led Light Bar Vx250-Sp / 12V/ 24V / Flood Beam & Mounting Bracket - RRAC227
$157.50
$175.00
Don’t let darkness throw shade on your adventures. Keep exploring after nightfall with the 10" LED Light Bar. The high-performance LEDs with OSRAM technology, throw 1500 lumens over 37m. It features an intelligent reflector design that diverts the light from the LEDs so that oncoming traffic is not directly exposed to the light; as well as an additional yellow cover, that won’t attract insects to your campsite.
The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens.
The 3000 Kelvin intensity is distributed as a flood beam pattern.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site.
The integrated driver and thermal management system measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112).
The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislation of the countries must be observed.
Installs easily into the front, back or side profiles of your Slimline II Rack, or to the side of the Slimsport Rack with 10" LED Light Bar VX250-FL Mounting Bracket.
The mounting bracket includes side guards to protect the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light from potential damage caused by flying rocks and other road debris.
Fitment guide and installation hardware included.
Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Front Runner
FRONT RUNNER Toyota Sequoia (2023-Current) Slimsport Rack 40 Light Bar Wind Fairing - RRAC286
$226.80
$252.00
Improve aerodynamics and enjoy a quieter ride on your loaded Toyota Sequoia with the specially-designed Slimsport Rack Wind Fairing. This innovative accessory reduces drag and minimizes wind noise by efficiently channeling air over your Slimsport Roof Rack. This particular model features a 40" cutout to allow the use of the Front Runner 40" Light Bar, so you can keep exploring even after the sun goes down.
Lightbar wind fairing for the Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Sequoia 40" light bar wind fairingFitment Guide Installation Hardware
Materials used:Black powder-coated high strength steel
Product Dimensions:1281mm (50.4") L x 169mm (6.7") W x 172mm (6.8") H
Weight:4kg (8.8lbs)
Front Runner
FRONT RUNNER Chevrolet Colorado/Gmc Canyon (2015-2022) Slimsport Rack 40 Light Bar Wind Fairing - RRAC262
$158.00
$176.00
Be more economical when hauling gear and add light to your Chevrolet Colorado or GMC Canyon (2015-2022) with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Lightbar wind fairing for Chevrolet Colorado/GMC Canyon (2015-2022) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Chevrolet Colorado/GMC Canyon Slimsport Rack 40" Light Bar Wind FairingFitting InstructionsInstallation HardwareMaterials used:Black powder coated steelProduct Dimensions:1450mm (57.1") L x 255mm (10") W x 55mm (2.2") HWeight:2.7kg (5.9lbs)
Front Runner
FRONT RUNNER Baja Designs Lp4 Linkable Light Slimsport Mounting Kit - RRAC295
$62.10
$69.00
The pair of mounting brackets secure this Baja Designs LP4 light pod to a Front Runner Slimsport Roof Rack (using our light bar wind fairing) and Slimpro Van Rack.
This mounting allows for a lower position of the light pods when installed with a Slimsport Lightbar Wind Fairing and provides clearance for various roof top tents.
Multiple brackets can be secured / linked together to form up to a 7 pod lightbar.
The bracket can also be fitted to the front underside of a Front Runner Slimline II rack with suitable clearance.
For fitment to the Slimline II, a minimum of 180mm (7.1") is required below the Rack to position the bracket and lights.
Steel components are all sealed with the same durable, weather-resistant black powder coating as the Front Runner Roof Racks.
Includes all installation hardware, light fasteners and fitting instructions.
Consists of:2 x Brackets 2 x SpacersHardware Kit Fitting InstructionsMaterials used:Black powder-coated high strength steelProduct Dimensions:142mm (5.6") L x 135mm (5.3") W x 60mm (2.4") H (single backet) Weight:870g (30.7oz)
Front Runner
FRONT RUNNER Subaru Outback Gen 6 (2020-Current) Slimsport Rack 40 Light Bar Wind Fairing - RRAC328
$188.10
$209.00
Get ready to light up the night while reducing drag and noise with this 40” Light Bar Wind Fairing for the Slimsport Rack on your Subaru Outback GEN 6. It also improves fuel consumption when you have bulky items on the rack and its durable rubber beading, found on the bottom edge, gives added protection when going over rough terrain.
Lightbar wind fairing for Subaru Outback GEN 6 (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber beading is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Subaru Outback Slimsport Rack Light Bar Wind Fairing1 x Wind Fairing Rubber - 950mm (L)1 x Clear VinylInstallation HardwareFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:73mm (2.9") L x 1145mm (45.1") W x 206mm (8.1") H
Weight:2.99Kg (6.6lbs)
Front Runner
FRONT RUNNER Toyota Land Cruiser Prado / Lexus Gx 550 (2024-Current) Slimsport Rack 40 Light Bar Wind Fairing" - RRAC341
$194.40
$216.00
Lightbar wind fairing for Toyota Land Cruiser Prado 250 (2024-Current) Slimsport Roof Rack Kit / Lightbar Ready or Lexus GX 550 (2024-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included
Consists of:1 x Toyota Land Cruiser Prado / Lexus GX 550 (2024-Current) Slimsport Rack Wind Fairing Light Bar ReadyHardware KitFitment Guide
Materials used:Black powder-coated steel
Product Dimensions:1188mm (46.8") L x 194mm (7.6") W x 146mm (5.7") H
Weight:3.3Kg (7.3lbs)
Front Runner
FRONT RUNNER 40In Led Light Bar Vx1000-Cb Sm / 12V/24V - RRAC265
$711.00
$790.00
A 40” LED Light Bar featuring 36 intense, high-performance LEDs, with OSRAM technology, that reaches a distance of 525m and delivers 6000 lumens. The 5700 Kelvin, light intensity is distributed as a combo beam pattern- near and far-field illumination. The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
To accommodate its wide range of uses, the searchlight is equipped with a durable polycarbonate lens. The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan. Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
Individual installation is possible due to the VX1000-CB SM's double ECE certification. The 12V/24V LED light bar is ECE-compliant and versatile in application and is not limited to automotive use only. Special regulations and legislation within each country should be taken into consideration before use. Secures to your Front Runner Roof Rack with supplied RRAC217.
Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions
Materials used:Black powder coated steel and aluminium mounting brackets
Product Dimensions:Light Bar:1031mm (40.6") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with Bracket:1070mm (42.1") L x 102mm (4") W x 58mm (2.3") H
Weight:5.56kg (12.3lbs)
Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)
Narva
NARVA 4" Ex2 Driving Lamp Kit (Pair)- 72142
$159.00
$187.11
The Narva 4" EX2 Driving Light (12/24V) is part of the EX2 range, designed for DIY 4WD enthusiasts as well as fleet and transport operators. Built for performance and reliability, it offers an exceptional beam pattern that enhances visibility in all conditions. With an extra-easy installation process and durable construction, the EX2 driving light ensures long-lasting service even in demanding environments. Its extensive customisation options allow you to tailor the light’s look and performance, helping you express your style while enjoying powerful illumination.
Features:
4" EX2 driving light suitable for 12/24V systems
Exceptional beam pattern for improved visibility
Quick and simple installation
Heavy-duty build for durability in tough conditions
Customisable design options for a personalised look
Ideal for 4WD, fleet, and transport applications
Warranty: 7 years
Specifications
Input Voltage Range:
9-33V
Current Draw:
@12V: 5A (Pair)
Leds:
12 x High Power LEDs
Lumens:
6,590 Raw / 4,520 Effective Pair
Ip Rating:
IP68 & IP69K
Colour Temperature:
5700°K
Other:
Beam Type: Hybrid
Narva
NARVA 9" Ex2 Driving Lamp Kit (Pair) - 72182
$589.00
$692.01
The Narva 9" EX2 Driving Light Kit Pair is designed for off-road enthusiasts, fleet, and transport applications requiring reliable and powerful lighting. Part of the EX2 range, these lights feature exceptional beam pattern performance, durable construction, and easy installation. With extensive customisation options, they allow users to enhance their vehicle’s visibility and appearance while maintaining high-quality, long-lasting performance. The kit is suitable for 12V and 24V systems, providing versatility across a wide range of vehicles.
Features:
9" EX2 driving light kit pair for 12V and 24V systems
Exceptional beam pattern performance
Robust, durable construction for long-term use
EXtra-easy installation for DIY enthusiasts
Extensive customisation options to suit vehicle style
Ideal for 4WD, fleet, and transport applications
Warranty: 7 years
Specifications
Input Voltage Range:
9�33V
Current Draw:
@13.5V: 19.2A
Leds:
40 x 5 Watt Cree LEDs
Lumens:
27,200 Raw / 19,400 Effective
Ip Rating:
IP68 & IP69K
Colour Temperature:
5700°K
Other:
Beam Type: Hybrid
Narva
NARVA 7" Ex2 Driving Lamp Kit (Pair) - 72172
$465.00
$544.50
The Narva EX2 range of driving lights offers easy installation for the DIY enthusiast, leading performance and unprecedented user customisation.The internal switching design utilises the high beam circuit to trigger, doing away with any under-dash work.Exceptional quality builds on the success of the Ultima range of driving lights. Components including polycarbonate virtually unbreakable lenses, composite glass-filled nylon brackets, UV resistant hard coating, annd die-cast aluminium housings give these driving lights world-class durability and reliability backed by an IP68 and IP69K rating. They are impervious to dust, water and high pressure washing.Express yourself with a range of accessory trims. A blue and slate coloured set are included. You can even design your own custom lens protector graphic via a downloadable template on Narva's website to help your vehicle stand out from the crowd!Note: For vehicles registered in NSW and QLD, regulations require a switch to be added.
Technical Specifications
Beam type
Hybrid
Brand
Narva
Colour Temperature
5700°K
Current Draw
@13.5V: 11.6A
Input Voltage Range
9 – 33V
IP Rating
IP68 & IP69K
LEDs
24 x 5 Watt Cree LEDs
Lumens
16,320 raw / 12,000 effective
WARRANTY INFORMATION: 7 years
Narva
NARVA 9" Ex2 Driving Lamp Kit (Pair) With Rgb - 72184
$939.00
$1,105.01
The Narva 9" EX2-R Driving Lamp Pair delivers exceptional performance, durability, and innovation, making it an ideal choice for 4WD, transport, and fleet applications. Designed with the DIY enthusiast in mind, the EX2-R series combines world-class engineering with clever installation features and extensive customisation options.
Key Features:
Pair of 9” EX2-R Driving Lamps
Harness-free, easy installation
UV-resistant, virtually unbreakable polycarbonate lens
Diecast aluminium housing with composite nylon brackets
IP68 & IP69K rated for maximum durability
Hybrid beam – 1 lux at 700m (Length) & 60m (Width)
8 interchangeable trim colour options
Specifications
INPUT VOLTAGE RANGE
9-33V DC
CURRENT DRAW
@13.5V: 9.62/4.64
LEDs
40
LUMENS
13600 raw/9700 effective
IP RATING
IP68 & IP69K
OPERATING TEMPERATURE
-40 - +60°
COLOUR TEMPERATURE
5700K ±5%
WEIGHT
2620g 10%
Narva
NARVA 7" Ex2 Driving Lamp Kit (Pair) With Rgb - 72174
$579.00
$680.00
The Narva 7" EX2-R Driving Lamp Pair combines superior performance, innovative design, and rugged construction, making it ideal for 4WD, fleet, and off-road applications. Designed for easy installation and customisation, the EX2-R series delivers exceptional clarity and reliability under all conditions.
Key Features:
Pair of 7” EX2-R Driving Lamps
Harness-free installation
UV-resistant hard-coated polycarbonate lens
Diecast aluminium housing with composite nylon brackets
IP68 & IP69K rated for extreme durability
Hybrid beam – outstanding width and distance
8 interchangeable trim colour options
Specifications
INPUT VOLTAGE RANGE
9-33V DC
CURRENT DRAW
@13.5V: 9.5A
LEDs
24
LUMENS
8160 raw/6000 effective
IP RATING
IP68 & IP69K
OPERATING TEMPERATURE
-40 - +60°
COLOUR TEMPERATURE
5700K ±5%
WEIGHT
2000g �10%
OTHER
Beam type: Hybrid
Narva
NARVA Handheld Led Inspection Lamp- 71322
$119.00
$199.00
The new See Ezy Rechargeable LED Inspection Light takes the popular Narva workshop light to a whole new level. With up to 16 hours continuous runtime, an effective output of 500 or 1000 effective lumens, and IP65 and IK07 rated, the new See Ezy Inspection lamp is long lasting, powerful and virtually indestructible!Shock resistant body tested to IK07 impact resistant levels, a virtually unbreakable polycarbonate lens and weatherproof rubber housing (IP65) chemically tested to resist oils and fuels. Ideal for workshops, commercial and industrial environments. Featuring a sealed integrated switch, two heavy-duty magnets.With 16 hours runtime at 500 effective lumens and 8 hours runtime at 1000 effective lumens. Torch spotlight produces 100 effective lumens. Auto turn off every 2 hours to preserve battery if unused. Flood light will flash as an early warning turn off every 2 hours. Hold power button for 10 seconds to disable auto turn-off. With fast USB-C charging via built-in charging port and compact docking station, charging is made even easier. This ensures the light is always charged ready for use.Contains: 1 x See Ezy Rechargeable LED Inspection Light; 1 x Lithium battery with no memory effect; 1 x 240V docking station for workshop recharging; 1 x 240V power plug and USB-C to USB-A cable for fast charging via USB; Integrated heavy duty magnets for hands free operation; Concealed swival hanging hook.
Technical Specifications
Brand
Narva
Charging Time
4.5 - 5.5 hours
Input Voltage Range
3.7V / 5200mAh Li-ion
IP Rating
IP65 and IK07
LEDs
36 SMD LEDs
Lumens
Flood:500/1000 lm Spot: 100lm
Operating Temperature
0°C – 40°C
Operating Time
16/8 hours
Size
79 x 107 x 305mm
Weight
590g
Narva
NARVA Led Under Bonnet Lamp- 71230
$255.00
$299.00
Narva Rechargeable L.E.D Under Bonnet Lamp is ideal for workshops, home garages & is also popular with campers. This lamp is equipped with 3 powerful 5 Watt L.E.Ds set up in 40 deg swivel housings allowing you to get the light exactly where you want it. The arms slide in or out so you can adjust the width to suit your bonnet, boot or any other application you may be using it for. Adjusts from 1.2m -1.7m. The end of the arms are padded to protect paintwork. Different light outputs can be selected by using 1, 2 or all 3 lights. With all 3 L.E.D's on you will have 1000 lumens of light at your disposal. Contains Lithium ion battery & is charged via USB. 6.5 hour charge time will give you 6-15 hours of use. The body is constructed from aluminium, ABS and polycarbonate materials making the lamp light yet strong to survive harsh workshop conditions. Backed by Narva's 3 year L.E.D warranty.
Specifications
SKU
MBQNAV71230
Brand
Narva
Narva
NARVA 250 Lumed Detatchable Head Torch- 71426
$100.00
$149.00
Featuring a unique detachable lamp with integrated magnet for increased user applications, the 71426 is incredibly versatile. The head lamp allows selection between a powerful spot beam with 60 metre beam pattern or 120 degree flood light. There is also an option to combine the spot or flood beam with an arc shaped flood beam for even more powerful lighting.
Technical Information
LEDs
High efficiency COB LED
LUMENS
150 & 120
IP RATING
IP65
SIZE
83x56x42mm
WEIGHT
200g
COMPRISES
1 x 71426 Rechargeable L.E.D Head Lamp; 1 x 240V Charger; 1 x USB Charger;
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
