Interior & Towing

Suits Nissan Patrol Y62 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA LANDCRUISER 76 SERIES LEFT STORAGE DRAWER SYSTEM-E930A-LC76-LEFT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA PATROL Y62 LEFT STORAGE DRAWER SYSTEM-41008 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA 4X4 LANDCRUISER 100 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC100-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA EVEREST LEFT STORAGE DRAWER SYSTEM-E930-EVERES-LEFT-COM SUITS Ford Everest 7 Seat Model, No removable wing/face panels Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 LANDCRUISER 200 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC200-COM Designed from the ground up, the way a quality 4WD storage system should be. SUITS Toyota Landcruiser 200 Series GXL/VX/Sahara Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA 4X4 PRADO 150 SERIES DOUBLE STORAGE DRAWER SYSTEM-E930-PRA150-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

Front Full Width Bench. Year: 08/97-04/05 Model: LN167 WORKMATE 2WD Position: Front Weight: 3 kg Freight Dimensions: 36 × 26 × 19 cm

Complete Front & Second Row Set. Year: 08/19-Current Model: 8th Gen SR5 / SR Extra Cab Weight: 6 kg Freight Dimensions: 36 × 26 × 38 cm Position: Complete

The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts

We've got something that'll light up your off-road world like a bonfire on a starry night – the Lightforce 20-inch Dual-Row LED Light Bar. Hold onto your hats because this ripper of a light bar is an absolute game-changer. Aussies love their wide-open spaces, and this Lightforce light bar is here to ensure you see every inch of it. It's part of the new and affordable VIPER range, slimmer and lighter– up to 25% less weight. But don't let its lightweight nature fool you; it's tougher than a hungry croc. The Lightforce VIPER Light Bar rocks a screwless bezel design, making it a piece of cake to integrate seamlessly with your rig. You'll have that factory look you're after, which fits like a glove on your 4x4. No worries about water getting where it shouldn't either, with a water-tight IP68/69K rating.  It also comes with the exclusive "smart harness". It's got a built-in bridge rectifier, making it a breeze to connect to modern vehicles. It also has marine-grade, stainless steel side brackets that'll last longer than your rig. But that's not all – bonus rear slide mounts are thrown in for extra mounting options. The 20" Dual-Row Light Bar will complement your spotlights, giving you a wider beam to conquer those dusty trails. No more ear-splitting interference with your AM or UHF radio – this beauty has your back. Specs and Features: Beam strength: 1 LUX @ 984 meters SMART Harness included Marine Grade Powder Coat Waterproof with IP68/69K rating Slim and lightweight design (25% lighter) Screwless bezel for seamless integration Exclusive "smart harness" for modern vehicles Bonus rear slide mounts for extra options Wide beam for enhanced visibility Minimal radio interference TJM Northern Beaches Expert Tip  -When it comes to 4WD lights like this ripper from Lightforce, remember to give 'em a quick check before you hit the dusty trail. Make sure they're clean and secure. It'll ensure you're never caught in the dark. What others are saying about this product  ‘’Just quality.’’

The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts

Aftermarket 4WD accessories need to be fair dinkum none of this she’ll be right away you go business. This equipment needs to get you through some pretty tricky situations. The remote wilderness of Australia will chew up cheap aftermarket accessories. The Lightforce Viper 50’’ dual-row LED light bar is the real deal. It can be put against even the harshest of environments. The new sleek design is versatile and compact. But don’t let its new slim design fool you. Its beam strength is stronger than ever – projecting at 1065m.  The exterior finish powder coating is marine grade, which is UV and impact resistant. Coupling that with its scratch and impact-resistant polycarbonate lens allows for maximum clarity and will keep its good look well into the long term, unlike other light bars on the market. The brackets are made of 308-grade stainless steel allowing them to always be mounted solidly to your vehicle.  What’s included in the kit – 1x Viper 50 Inch Dual Row LED Light bar, stainless steel side brackets and fixings, rear slide mount brackets and fixings, torx key, user instructions and 1x full ‘smart’ wiring harness including relay and harness with 8-pin switch connection.  Features and Specs  50” dual-row led light bar  Powders coated marine grade  IP68 Waterproof  308 stainless side steel brackets  RF shielding technology reduces radio interference Lightweight, slimline and stylish new housing  Includes free slide mounts with every bar  Scratch and impact-resistant polycarbonate lens  Modern screwless front bezel design Rock solid warranty: 3 years  Distance: 1 lux at 1065m Effective Lumens:  17633lm Raw Lumens: 51476lm Colour Temperature: 5500K Current Draw: 25.3Amp Voltage Range: 12v/24v Compatible Wattage: 92x3W/8x10W Ingress Protection Rating: IP68 Weight: 3560g Suppliers code: LFLB50D TJM Northern Beaches Expert Tips – Keep your lights clean. This will make sure the light is being projected correctly and evenly.   What others are saying about this product  ‘’Lightforce has always been a little pricier than average but cars seem to wear them for a long time.’’

With a stylish rectangular form factor for a cool look on any 4X4, SUV or ute, and great all-round performance, Striker LEDs are the latest Driving Lights from the leader in performance lighting. Australian made Striker LEDs are designed to perform to our consistently high standards. Their IP68 and IP69k ingress protection rating means they can handle a creek crossing and a high-pressure washdown after an adventure. With reduced radio interference technology included, you can listen to the radio without static. And a range of modular filters lets you modify the lights to suit your driving conditions. Made in Australia 15 x high-quality LumiLED LEDs providing consistent high performance LED spot reflectors with the ability to use modular filters to produce a wide driving light beam pattern or flood diffusion filter for work light environment IP68 and IP69K resistant to water and dust ingress 77mm slim footprint for multiple mounting options Reverse polarity voltage protection and high current waterproof connectors PCB designed with reduced electromagnetic interference CE certified Thermal overload protection protects the light from overheating Hard-wearing UV stable powder-coat finish High-pressure diecast aluminium housing and bezel providing strength and weight reduction Impact-resistant polycarbonate filter for added protection Genuine Gore® waterproof membrane with mechanical seal 3 year warranty Specifications Distance: 1 lux at: 533m Distance: 0.25 lux at: 1066m Effective Lumens: 3466 (Individual) Raw Lumens: 5625 (Individual) Colour Temperature: 5000K CRI: 70 Current Draw: 4.4Amps @ 13.2V Voltage Range: 10V - 36V DC Wattage: 60W Ingress Protection Rating: IP68, IP69K Weight: 1Kg (Including Mounts) What's Included Single light contains one light,cover, and mounting hardware, no wiring harness (available separately). 1 x Striker Professional Edition LED Driving Lights (STRIKERLEDPK) 1 x Clear filters with Lightforce logo 1 x Reversible mounting hardware 1 x User instructions Compatibility Universal

FEATURES: Made in Australia 75W LED / 8820lm (raw) for industry-leading output 21 x high-quality Lumileds LEDs that provide consistent performance LED spot reflector with the ability to use a combination modular filter 66mm slim footprint that provides multiple mounting options 3 stage operation: Full intensity, day time, or nighttime positioning options Reverse polarity voltage protection and high current waterproof connectors CISPR25 compliant, reduced radio frequency interference technology Thermal overload protection prevents light from overheating Hard-wearing UV stable powder coat finish IP69K rated / Gore® waterproof membrane to protect against water and dust Pressure diecast aluminium housing and bezel providing lightweight strength Impact-resistant polycarbonate filter for added protection 3 year warranty. PRODUCT SPECIFICATION More Information Distance: 1 lux at 939m (Pair) Effective Lumens 5764 Raw Lumens 8820 Colour Temperature 5000K CRI 70 Current Draw 5.7Amps @ 13.2V Voltage Range 10V - 32V DC Wattage 75W Ingress Protection Rating IP69K Weight 1.2kg Including Bracket

• Bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow "V" line common in aftermarket kits • XENON HID bulbs used in these kits have been specially manufactured to match the relevant ballast outputs • Colour rendering available 4200K, 5000K • Ballast is pre-mounted to a stainless steel bracket located directly to the back of the light • Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference • Fully sealed and water-resistant compact slim-line ballast • Waterproof connectors provided • Available in 50w and 70w 70w ballast is now upgraded to a Fast start (12v only) reaching 100% intensity in 3 seconds (previous model 100% intensity was reached at 8 seconds). Specifications Recommended operating temperatures (ambient) -40°C > +40°C Maximum -40°F > +104°F Maximum Lumen output: 50 watt 5000 lumen 70 watt 6400 lumen For 50w and 70w models Input voltage range 12 - 16 volts Operating voltage 13.2 volts DC (typical)

Striker IR LEDs are the latest infrared driving lights from Lightforce. Their rectangular shape gives them a rugged look on any 4X4 or SUV. Striker IR LEDs are the latest infrared driving lights from Lightforce. Their rectangular shape gives them a rugged look on any 4X4 or SUV, and that’s the only thing even slightly square about them. They’re designed to perform to our impossibly high standards, and their IP68 and IP69K ingress protection rating means they can handle a roaring creek crossing and even a high-pressure wash after a little adventure in the mud and dust or while serving a warrant. Reduced radio interference technology allows you to operate communication equipment such as ham radios, CB and FRS radios static-free. And a range of rectangular modular filters lets you modify the lights to suit any conditions. A pair of protective clear spot filters is included. Operating at 850nM, they perform well with all types and generations of night vision and remain our most premium IR product offering. A complete wiring harness is also included for easy installation. FEATURES Emitter Type: LED IRCurrent Draw: 4.4 amps @ 13.2 Volts Input Voltage: 10-30V Beam Pattern: Driving Approx Beam Distance: 700 yd Housing: Cast Steel Water & Dust: GORE® Protective Vent Weight: 1kg / 2.2lb KIT INCLUSIONSStriker LED Pair:2 x Striker IR LED Driving Lights2 x IR Spot filters2 x Reversible mount and hardware1 x User instructions1 x DIY harness installation kit.

MSA 4X4 Double Storage Drawer System for Ford Ranger PX & Mazda BT-50 Upgrade your vehicle storage and organisation with the MSA 4X4 Double Storage Drawer System, purpose-built for the Ford Ranger PX Series and Mazda BT-50. Designed for touring, trade, and off-road applications, this premium storage system provides secure, organised, and easily accessible storage while maximising the usable space in your vehicle tub. Featuring MSA 4X4's patented drawer technology, both drawers extend 100% beyond the frame, providing complete access to your gear. Fully sealed stainless steel bearings and nylon rollers ensure smooth, quiet operation under heavy loads, while reducing overall system weight compared to traditional drawer designs. Constructed from lightweight yet exceptionally strong aluminium with corrosion-resistant components throughout, this storage system is built to handle years of demanding use in harsh Australian conditions. Key Features Designed specifically for Ford Ranger PX, PX2, PX3 and Mazda BT-50 UP, UR models. 100% drawer extension for complete access to stored equipment. Patented Stay-Open Block keeps drawers securely open on slopes up to 30 degrees. Fully sealed stainless steel bearings with nylon rollers. Integrated LED light strips illuminate drawer contents when fully extended. Heavy-duty secure locking system. Dust-resistant seals help protect stored equipment. Removable wing and face panels provide access to additional storage areas. Premium Construction Lightweight aluminium drawer modules. Anodised aluminium components for maximum durability. Rust-resistant stainless steel fasteners throughout. Smooth and quiet drawer operation under load. Designed for long-term off-road and touring use. Safety & Compliance Includes cargo barrier mounting points. Includes child restraint anchor points. Designed to improve cargo security during travel. Built to MSA 4X4's high safety and quality standards. What's Included Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire Complete Wing Kits Cargo Barrier Mounting Points Child Restraint Points Compatible Accessories Drawer Stacking Kit (40001) Drawer Divider (EDDIV) Left Power Panel (EPP-Left) Left Pre-Cut Panel (SP0506) Right Power Panel (EPP-Right) Right Pre-Cut Panel (SP0507) Large Battery Box (40018) Slimline Battery Box (40019) Explorer Storage Bag Bundle (20013) Explorer Storage Bag Large (20012) Explorer Storage Bag Medium (20011) Explorer Storage Bag Small (20010) Deluxe Coffee Kit Black (45042) Deluxe Coffee Kit Cream (45043) Vehicle Compatibility FORD RANGER PX (2012-2022) FORD RANGER PX2 (2015-2022) FORD RANGER PX3 (2018-2022) MAZDA BT-50 UP (2011-2020) MAZDA BT-50 UR (2018-2020) Dimensions External Dimensions Length: 1365mm (including handle lock) Height: 275mm Width per Drawer: 530mm (excluding wings) Internal Drawer Dimensions Internal Length: 1250mm Internal Width: 453mm Drawer Height: 211mm Usable Height: 215mm Specifications Product Code: E1350-BT50-COM Product Type: Double Storage Drawer System Weight: 112.4kg Important Information Designed to mount directly to the vehicle tub body. Not compatible with factory or aftermarket tub liners. Tub liners must be removed prior to installation. Warranty Covered by the renowned MSA 4X4 Lifetime Guarantee for long-term confidence and reliability.

The LIGHTFORCE BEAST 190 LED Driving Light is a high-performance 3-mode lighting solution engineered for extreme visibility and versatility. Designed and manufactured in Australia, it delivers exceptional beam distance, width, and durability in a compact 190mm form factor. Featuring 3 selectable beam modes — Spot, Flood, and BEAST — you can adapt instantly to changing driving conditions. Whether navigating open highways, bush tracks, or wide terrain, the BEAST 190 ensures maximum control and confidence. Built to exceed global durability standards, the BEAST 190 combines advanced LED technology, rugged construction, and intelligent thermal management to perform reliably in the harshest environments. Key Features 3-mode beam operation: Spot, Flood, and BEAST mode Up to 1 lux at 1260m (pair) for extreme long-range visibility 25 high-performance Osram LEDs for maximum output Compact 190mm size with ultra-slim 80mm depth IP69K waterproof and dustproof rating IK16 impact resistance for extreme durability 5700K colour temperature for clear, natural visibility Reversible mounting bracket for flexible installation DRL (Daytime Running Light) functionality Pressure die-cast aluminium housing for strength and heat dissipation 3 Beam Modes Explained Spot Mode: Long-distance beam – 1 lux at 1195m Flood Mode: Wide beam – 1 lux at 496m BEAST Mode: Maximum distance + width – 1 lux at 1260m Performance & Durability Tested to operate from -40°C to 85°C Survives temperature spikes up to 125°C Over 200,000 power cycle durability IK16 rated impact resistance Salt spray, chemical, UV, and corrosion resistant LED lifespan up to 50,000 hours 10,000 hours continuous operation tested Beam Performance BEAST Mode: 1260m distance, 142m width Effective Lumens: 7101 / 6217 / 13,544lm Raw Lumens: 10,206 / 9,961 / 16,806lm Candela: 714,820 / 123,130 / 794,690cd Specifications Diameter: 190mm Depth: 80mm Weight: 1.6kg Voltage: 13.2V Current Draw: 7.1 / 5.8 / 11.4 Amps Ingress Rating: IP69K Colour Temperature: 5700K Warranty: 5 Years What’s Included 1 × BEAST 190 LED Driving Light 1 × Reversible Mounting Bracket 1 × Clear Filter with Lightforce Logo 1 × Lightforce Sticker User Instructions Why Choose LIGHTFORCE BEAST 190 Australian designed, engineered, and manufactured Unmatched beam versatility with 3 modes in one light Extreme durability tested beyond global standards Compact design fits modern vehicles and bull bars Ideal for off-road, touring, and professional use