Antennas

The AEM4702B AM/FM radome antenna has been designed to match one of our most popular UHF CB antennas, the AE4702B. This new AM/FM antenna will perfectly match your existing UHF CB antenna using a common mechanical design. GME has a specialised design team with the ability to develop application-specific antenna products. GME continues our ongoing commitment and dedication to local Australian manufacturing with a purpose-built facility based in Sydney. Local manufacturing ensures GME is able to produce the highest quality communications equipment tailored to the harsh Australian landscape. Made in Australia Black Fibreglass Radome Medium Duty Spring Base Detachable Whip Ground Independent Design Pre-terminated Automotive Connector AM / FM / DAB+ Length: 1060mm 1 Year Warranty Key Features Made in Australia Black Fibreglass Radome Medium Duty Spring Base Detachable Whip Ground Independent Design Pre-terminated Automotive Connector AM / FM / DAB+ Length: 1060mm In the box Antenna Whip (AEM4702B-W) Medium Duty Spring Base (AS002B) 4.5m Lead Assembly with Automotive Connection

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included 6.6dBi Antenna Whip (AW4702) Medium Duty Spring Base (AS002) 4.5m Lead Assembly (ABL004) FME - PL259 Adaptor (AD503)

GME designs and manufactures a wide range of pre-tuned 27MHz antennas and whips. Available in a variety of lengths and styles, GME’s 27MHz antenna range ensures reliable communication for every situation and set-up. Made in Australia Black Fibreglass Whip Ground Independent Design 1100mm Length Key Features Black Fibreglass Whip Ground Independent Design Length: 1100mm In the box Base Loaded Whip With 4.5m of Low Loss Coaxial Cable

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included6.6dBi Antenna Whip (AW4703)Heavy Duty Spring Base (AS003)4.5m Lead Assembly (ABL004)FME - PL259 Adaptor (AD503)

When you are after a UHF antenna with high gain, but with a modest height, the AE4006 is the best choice. At only 1.2 metres high, this antenna provides for 8.1dBi gain and is ground dependent so has a wide choice of mounting locations paired with the right mounting bracket. The antenna is fibreglass with a braided/precision wound copper element, black heat shrink and chrome plated ferrule. Fibreglass whip with heavy duty braid copper element Ground Dependent 8.1 dBi Length 1200 mm Thread 5/16 x 26 TPI In the Box: Whip only

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included Antenna Assembly 4.5m Coaxial Cable and Plug FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included Antenna Assembly 4.5m Coaxial Cable and Plug FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. The AE4705WB is a popular choice for the 4WD enthusiast requiring a robust antenna for hardcore off-roading or touring. Also available in a Twin Pack (AE4705WBTP). SpecificationsWhite Fibreglass RadomeHeavy Duty Spring BaseInterchangeable WhipGround Independent DesignPre-terminated FME Connector6.6dBi GainLength: 1200mmWhat's Included6.6dBi Antenna Whip (AW4705WB)Heavy Duty Spring Base (AS004B)4.5m Lead Assembly (ABL004)FME - PL259 Adaptor (AD503)

The AEM4705B AM/FM radome antenna has been designed to match our most popular UHF CB antenna, the AE4705B. This new AM/FM antenna will perfectly match your existing UHF CB antenna using a common mechanical design. GME has a specialised design team with the ability to develop application-specific antenna products. GME continues our ongoing commitment and dedication to local Australian manufacturing with a purpose-built facility based in Sydney. Local manufacturing ensures GME is able to produce the highest quality communications equipment tailored to the harsh Australian landscape. Made in AustraliaBlack Fibreglass Spring BaseHeavy Duty Spring BaseDetachable WhipGround Independent DesignPre-terminated Audio ConnectorAM / FM / DAB+Length: 1200mm1 Year Warranty Key FeaturesMade in AustraliaBlack Fibreglass RadomeHeavy Duty Spring BaseDetachable WhipGround Independent DesignPre-terminated Audio ConnectorAM / FM / DAB+Length: 1200mm In the boxAntenna Whip (AEM4705B-W)Heavy Duty Spring Base (AS004B)4.5m Lead Assembly with Automotive Plug

GME’s range of Australian Made AM/FM antennas lead the market in performance and quality. Our antennas are designed, engineered, and manufactured to ensure reliability and high performance in the harshest environments. Compatible with all stereo products, these antennas enhance the reception and clarity of any vehicle’s entertainment system. Made in AustraliaStainless Steel WhipGround Dependent Design1295mm Length Key FeaturesStainless Steel WhipGround Dependent DesignLength: 1295mm In the boxWhip Assembly (AEM5W)Antenna Base (AEM5B)Base, 5m Coaxial Cable and Automotive Plug (ABL003)

Built to last, the UHF CB Antenna range from GME is durable and consists of a variety of mounting, design and length options. Our antennas have a fit for purpose construction to suit your requirements ranging from Heavy Duty Off Road to On-Glass and Multi-Band PCB Design. Featuring a variety of gain options, there is a GME UHF CB Antenna to suit every application. -The AE4106 is compatible with the LE503 and LE504 assemblies Key Features White Fibreglass Radome Stainless Steel Base N-Type Connector 6dBi Gain Length: 1500mm In the box Antenna Assembly

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included 8.1dBi Antenna Whip (AW4706) Heavy Duty Spring Base (AS004B) 4.5m Lead Assembly (ABL004) FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. The AE4706B is a popular choice for the 4WD enthusiast requiring a robust antenna for hardcore off-roading or touring. Also available in White (AE4706). Made in Australia Black Fibreglass Radome Heavy Duty Spring Base Interchangeable Whip Ground Independent Design Pre-terminated FME Connector 8.1dBi Gain 2100mm Length Key Features Black Fibreglass Radome Heavy Duty Spring Base Interchangeable Whip Ground Independent Design Pre-terminated FME Connector 8.1dBi Gain Length: 2100mm In the box 8.1dBi Antenna Whip (AW4706B) Heavy Duty Spring Base (AS004B) 4.5m Lead Assembly (ABL004) FME -> PL259 Adaptor (AD503)

AE4015 2.1DB SLIMLINE UHF ANTENNA - GME The AE4015 has been developed as a slimline 2.1dBi UHF CB Antenna to suit the needs of ATVs, 4WDs and Agricultural vehicles when travelling in rough terrain. The antenna is supplied with a mounting base and 5 meters of low-loss coaxial cable terminated with an FME connection. Specially designed to be ground independent with a unique impedance transformer that allows for the whip to be removed from the base, reducing clearance issues when mounted on vehicles. GME has a specialised design team with the ability to develop application-specific antenna products. With a purpose-built facility based in Sydney, GME continuesour on-going commitment and dedication to local Australian manufacturing. Local manufacturing ensures GME can produce the highest quality communications equipment tailored to theharsh Australian landscape. Features: Made in Australia Slimline 350mm Whip Ground Independent Design with Unique Impedance Transformer Pre-terminated FME Connector 2.1dBi Gain 350mm Length

GME TX677 2W UHF CB Handheld Radio With a compact and lightweight mechanical design, up to 14 hours battery life, convenient USB charging, a rotary power/volume control for easy operation, switchable transmission power (2/ 0.5 watt), and a user programmable scan function, the TX677 is a serious performer in a compact chassis. Includes: 1 x 2 Watt UHF CB Handheld Radio (TX677) 1 x 1600mAh Li-Ion Battery Pack (BP027) 1 x USB Multi-Charging Cable 1 x AC Adaptor 1 x Belt Clip Features: Up to 14 hours battery life Compact & lightweight design mechanical design Rotary power/volume control for easy operation USB multi-charging 2/0.5W switchable transmission power Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service Specifications Frequency Range TX: 476.425 - 477.4125MHz Number of Channels: 80, (75 voice, 2 telemetry RX only, 3 for future use) Channel Spacing: 12.5 kHz Transmitter: Transmit Frequency Response: 2 watts/0.5 watt Audio distortion: <5% (1 kHz 70%) Receiver: Sensitivity: -121dBm Audio Output Power: >0.5 watt max. (8 Ohm) Power Supply/Supply Voltage: Li-ion rechargeable 3.7V DC, 1600 mA Dimensions (L x W x H): 52mm x 30mm x 90mm (without antenna) Warranty: 2 Year Warranty Covered by GME

GME TX667TP 2-Pack 1W UHF CB Handheld Radio With an ultra-compact and lightweight mechanical design, up to 17 hours battery life, convenient USB charging, a high contrast backlit LCD screen, switchable transmission power (1/ 0.5 watt), and a user programmable scan function, the TX667 is the perfect entry-level UHF CB radio. Includes: 2 x 1W UHF CB Handheld Radios (TX667) 2 x 1000mAh Li-Ion Battery Packs (BP020) 1 x AC Adaptor 1 x Twin Desktop Charger 2 x USB Multi-Charging Cables 2 x Belt Clips Features: Ultra compact & lightweight Up to 17 hours battery life USB multi-charging High contrast, backlit LCD screen 1/ 0.5 Watt switchable transmission power Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service Specifications Frequency Range TX: 476.425 - 477.4125 MHz Number of Channels: 80, (75 voice, 2 telemetry RX only, 3 for future use) Power Supply/Supply Voltage: Li-ion Rechargeable 3.7V DC, 1000 mA Transmitter: Transmit Frequency Response: 1 watt - 0.5 watt Receiver: Sensitivity: -121 dBm Intermodulation Immunity: <5% (1 kHz 70%) Audio Output Power: >0.5 watt max. (8 Ohm) Dimensions (L x W x H): 52mm x 30mm x 90mm (without antenna) Weight: 0.8 kg Warranty: 2 Year Warranty Covered by GME

GME TX677QP 4-Pack 2W UHF CB Handheld Radio With a compact and lightweight mechanical design, up to 14 hours battery life, convenient USB charging, a rotary power/volume control for easy operation, switchable transmission power (2/ 0.5 watt), and a user programmable scan function, the TX677 is a serious performer in a compact chassis. Includes: 4 x 2 Watt UHF CB Handheld Radios (TX677) 4 x 1600mAh Li-Ion Battery Packs (BP027) 4 x USB Multi-Charging Cable 1 x AC Adaptor 2 x 12V DC Charger 2 x Twin Desktop Charger 4 x Belt Clips 1 x Rugged premium carry case Features: Up to 14 hours battery life (per radio) Compact & lightweight design mechanical design Rotary power/volume control for easy operation USB multi-charging 2/0.5W switchable transmission power Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service Specifications Frequency Range TX: 476.425 - 477.4125MHz Number of Channels: 80, (75 voice, 2 telemetry RX only, 3 for future use) Channel Spacing: 12.5 kHz Transmitter: Transmit Frequency Response: 2 watts/0.5 watt Audio distortion: <5% (1 kHz 70%) Receiver: Sensitivity: -121dBm Audio Output Power: >0.5 watt max. (8 Ohm) Power Supply/Supply Voltage: Li-ion rechargeable 3.7V DC, 1600 mA Dimensions (L x W x H): 52mm x 30mm x 90mm (without antenna) Warranty: 2 Year Warranty Covered by GME

GME TX677TP 2-Pack 2W UHF CB Handheld Radio With a compact and lightweight mechanical design, up to 14 hours battery life, convenient USB charging, a rotary power/volume control for easy operation, switchable transmission power (2/ 0.5 watt), and a user programmable scan function, the TX677 is a serious performer in a compact chassis. Includes: 2 x 2 Watt UHF CB Handheld Radios (TX677) 2 x 1600mAh Li-Ion Battery Packs (BP027) 2 x USB Multi-Charging Cable 1 x AC Adaptor 1 x 12V DC Charger 1 x Twin Desktop Charger 2 x Belt Clips Features: Up to 14 hours battery life Compact & lightweight design mechanical design Rotary power/volume control for easy operation USB multi-charging 2/0.5W switchable transmission power Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service Specifications Frequency Range TX: 476.425 - 477.4125MHz Number of Channels: 80, (75 voice, 2 telemetry RX only, 3 for future use) Channel Spacing: 12.5 kHz Transmitter: Transmit Frequency Response: 2 watts/0.5 watt Audio distortion: <5% (1 kHz 70%) Receiver: Sensitivity: -121dBm Audio Output Power: >0.5 watt max. (8 Ohm) Power Supply/Supply Voltage: Li-ion rechargeable 3.7V DC, 1600 mA Dimensions (L x W x H): 52mm x 30mm x 90mm (without antenna) Warranty: 2 Year Warranty Covered by GME

TX3120SPNP Plug 'n Play UHF Radio Kit Introducing the latest generation of portable UHF CB communication – TX3120S Plug ‘N’ Play. This pack is easily installed into any vehicle within minutes and does not require any drilling, cutting or soldering. Aimed at the casual user TX3120S Plug ‘N’ Play is perfect for any convoy journey or rental vehicle. Designed and engineered in Australia TX3120S incorporates the widest LCD in its class size, twin rotary controls, speaker microphone and ScanSuite - GMEs latest scanning technology to enable uninterrupted conversations. When no longer required, all accessories pack away into the travel case supplied, ready for the next adventure. Product Details ScanSuite Dynamic Volume Control Selectable priority channel Voice inversion scrambler Memory channel quick select CTCSS & DCS Advanced signal management Full spectrum backlighting Active channel transmit in scan Digital signal processing Open and group scan mode 5 year warranty In the Box: TX3120S Super compact UHF CB radio Compact Magnetic Antenna Windscreen Suction Mount 12V DC Auxiliary Power Lead Speaker Microphone Convenient Travel Case Mounting Accessories Pack SKU: TX3120SPNP

TX3120SPNP Plug 'n Play UHF Radio Kit Introducing the latest generation of portable UHF CB communication – TX3120S Plug ‘N’ Play. This pack is easily installed into any vehicle within minutes and does not require any drilling, cutting or soldering. Aimed at the casual user TX3120S Plug ‘N’ Play is perfect for any convoy journey or rental vehicle. Designed and engineered in Australia TX3120S incorporates the widest LCD in its class size, twin rotary controls, speaker microphone and ScanSuite - GMEs latest scanning technology to enable uninterrupted conversations. When no longer required, all accessories pack away into the travel case supplied, ready for the next adventure. Product Details ScanSuite Dynamic Volume Control Selectable priority channel Voice inversion scrambler Memory channel quick select CTCSS & DCS Advanced signal management Full spectrum backlighting Active channel transmit in scan Digital signal processing Open and group scan mode 5 year warranty In the Box: TX3120S Super compact UHF CB radio Compact Magnetic Antenna Windscreen Suction Mount 12V DC Auxiliary Power Lead Speaker Microphone Convenient Travel Case Mounting Accessories Pack SKU: TX3120SPNP

GME TX6600STP 2-Pack 5W IP67 UHF CB Handheld Radios Your GME TX6600S 80 channel radio is Australian designed and manufactured and is the most advanced UHF Citizen Band radio available. GME has an extensive range of Handheld UHF CB Radios to meet a variety of needs. From 4WDing to construction sites, GME has a handheld to suit. Our TX6600S features class-leading 5 Watt transmission power, an IP67 ingressprotection rating for outstanding performance and years of reliable use in the harshest Australian environments, multiple power saving modes, Scansuite digital scanning technology and channel selection with voice announcement. Designed, engineered and manufactured in Australia, the TX6600S is ideal for users who demand the ultimate in handheld UHF CB communication, for both work and play. Included: 2600mAh Li-Ion Battery Pack (BP028) UHF Antenna 450-490MHz (AE4028) Desktop Charger (BCD022) AC Adaptor (PS005) Belt Clip (MB058) Features: 5/1/0.1 Watt RF Power, switchable transmission power Selectable transmitter power allows you to conserve the battery when transmitting in close range by using the Low (1W) or Ultra-Low (0.1W) Power Setting User selectable for only those individual channels in your area that have repeaters, leaving others free for use as extra simplex channels With the Ultra-Low (0.1 Watt) transmission power lasting upto 50 hours CB Channels: 80 channels 477 MHz UHF CB Advanced Power Saving Feature: Allows the TX6600S to sleep during periods of inactivity to conserve battery power Digital Signal Strength Meter: Displays the incoming signal strength in digital format Silent Squelch Tail: Eliminates the squelch noise burst in the recieving radio User Programmable Channels: 119 200 Recieving channels Microprocessor Controlled Frequency Synthesiser: Allows user programmable control of scanning, channel memories and selected feature options Scansuite - Digital scanning technology Programmable Scan Function: Scans up to 80 UHF CB channels and up to 119 user programmable channels Dual Watch: Scans two channels, working and priority Triple Watch: Scans three channels, working and both priority Priority Channels: Two separate Priority Channels allow any channels of your choice to be instantly recalled at the press of one of the Priority keys Voice Inversion Scrambler: A voice scrambler that, when activated, will make your transmission and reception intelligible only to other radios using the same scrambler technology CTCSS & DCS: Built-in Continuous Tone Coded Squelch and Digital Coded Squelch systems provide silent channel operation In-Built SelCall with Quiet Mode Rugged design, IP67 ingress protection Built to be rugged and robust for the harshest conditions Water & Dust Proof IP67: Provides protection against dust and temporary immersion in water Removable Antenna: High performance flexible antenna included Heavy-duty Construction: Rugged construction with Die-cast Chassis Multiple power saving modes High Contrast Liquid Crystal Display Keypad Lock LED Backlight Channel Announce: An audible voice that speaks the channel number whenever a channel is selected Digital Signal Processing (DSP): Measures, filters and compresses standard analogue audio signals and converts them to digital format Advanced Signal management (ASM): Identifies interference caused by strong local signals on adjacent channels and prevents it from opening the squelch Dynamic Volume Control: Automatically compensates for variations in received audio level resulting in a constant audio output level to the speaker Military Grade Specifications Drop Tested Made in Australia Suitable For: Civil Construction, Engineering, Mining, Councils 4WD Community Outdoor Recreation Agriculture Military Specifications: Frequency Range: TX: 476.425 MHz – 477.4125 MHz RX: 403 MHz – 520 MHz Number of Channels: 199 (80 CB plus 119 receive only) Channel Spacing: 12.5 kHz / 25 kHz Scanning Speed: 45 channels per second (22 ms per channel) Antenna: 50Ω, SMA male Supply Voltage: 7.4 V DC Battery Type: Li-Ion Battery Capacity: 2600 mAh Operating Time: 18 h / 21 h / 22 h (5 W, power saving OFF / LO / HI) 24 h / 33 h / 34 h (1 W, power saving OFF / LO / HI) 30 h / 49 h / 52 h (100 mW, power saving OFF / LO / HI) RF Output: High: 5 W Low: 1 W Ultra-Low: 100 mW Frequency Stability: ± 2.5 PPM Modulation: FM Spurious Emission: < -34 dBm Maximum Deviation: ± 2.5 kHz Audio Harmonic Distortion: 0.4% @ 1kHz / 1.5kHz Deviation Sensitivity: -121 dBm for 12 dB SINAD -120 dBm (450 MHz – 520 MHz) Adjacent Channel Selectivity: > 60 dB (NB) > 70 dB (WB) Audio Output Power: 1.5 W (8Ω) Audio Signal to Noise: 34 dB (SINAD) Operating Temperature: -20° C to +60° C Ingress Protection: IP67 (dust tight and waterproof) Accessory Connector: GME 3.5 mm / 2.5 mm stereo jack Dimensions (LxWxH): 42mm x 59mm x 128mm Weight: 337g Warranty: 5 Year Warranty Covered by GME Australia

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. The AE4704 is a popular choice for the 4WD enthusiast requiring a robust antenna for hardcore off-roading or touring. Also available in Black (AE4704B). SpecificationsWhite Fibreglass RadomeHeavy Duty Spring BaseInterchangeable WhipGround Independent DesignPre-terminated FME Connector2.1dBi GainLength: 580mmWhat's Included2.1dBi Antenna Whip (AW4704)Heavy Duty Spring Base (AS004)4.5m Lead Assembly (ABL004)FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included 2.1dBi Antenna Whip (AW4704B) Heavy Duty Spring Base (AS004B) 4.5m Lead Assembly (ABL004) FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included 2.1dBi Antenna Whip (AW4704B) Heavy Duty Spring Base (AS004B) 4.5m Lead Assembly (ABL004) FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included 2.1dBi Antenna Whip (AW4701) Stainless Steel Spring Base (AS001) 4.5m Lead Assembly (ABL004) FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. What's Included 2.1dBi Antenna Whip (AW4701) Stainless Steel Spring Base (AS001) 4.5m Lead Assembly (ABL004) FME - PL259 Adaptor (AD503)

The AE470x series is an adaptable UHF CB antenna system with a range of spring bases and user-interchangeable whips. This allows you to quickly and easily switch between whips to suit the operating conditions and application. The AE470x series includes a range of shorter length whips with lower gain for mountainous terrain or built-up areas, and longer length whips with higher gain for travelling on open roads or flat terrain. The AE4707B is designed for the 4WD enthusiast who requires a robust but compact antenna for remote touring in Australia’s harsh outback conditions. Made in AustraliaBlack Fibreglass RadomeMedium Duty Spring BaseInterchangeable WhipGround Independent DesignPre-terminated FME Connector2.1dBi Gain595mm length Key FeaturesBlack Fibreglass RadomeMedium Duty Spring BaseInterchangeable WhipGround Independent DesignPre-terminated FME Connector2.1dBi GainLength: 595mm In the box2.1dBi Antenna Whip (AW4701B)Medium Duty Spring Base (AS002B)4.5m Lead Assembly (ABL004)FME -> PL259 Adaptor (AD503)

GME 5/1 UHF CB HANDHELD RADIO IP67 - TX6600S Featuring class-leading 5 watt transmission power, an IP67 ingress-protection rating for outstanding performance and years of reliable use in the harshest Australian environments. Includes multiple power saving modes, Scansuite digital scanning technology and channel selection with voice announcement. This radio is serious equipment which has proudly been designed, engineered and manufactured in Australia. The GME TX6600S is ideal for users who demand the ultimate in handheld UHF CB communication, for both work and play. Also suiting a wide range of applications including civil construction, engineering, mining, councils, 4X4 and agriculture. GME has an extensive range of UHF CB Handheld Radios to meet a variety of needs. GME's class leading range, featuring the TX667, TX677, TX6160 and the TX6600S, are built tough and rugged to withstand the Australian landscape. This range features both entry level radio walkie talkies and serious equipment for both work and play. Features: Made In Australia 5/1/0.1 Watt switchable transmission power Rugged Design, IP67 Ingress Protection ScanSuite™ - Digital Scanning Technology 119 User-programmable RX channels (403-520MHz) Multiple power saving modes Two priority channels / Triple watch Rotary channel selection with voice announcement MIL-STD 810G 5 Year Warranty What's in the box? 5 Watt UHF CB Handheld Radio (TX6600S) 2600mAh Li-Ion Battery Pack (BP028) UHF Antenna 450-490MHz (AE4028) Desktop Charger (BCD022) AC Adaptor (PS005) Belt Clip (MB058) Part Number: TX6600S

GME 970MM ELEVATED-FEED ANTENNA (6.6DBI GAIN) - BLACK-AE4018BK1 GME’s range of elevated-feed UHF CB radio antennas provide a gain of 6.6dBi for a great all round performing antenna. Elevated-feed antennas provide high performance in virtually any mounting position. The elevated feed-design helps raise the radiating element above the vehicle roof or other obstructions to provide a strong, omni-directional pattern and high performance when mounted on a vehicle gutter, fender or bull bar. The ability to remove the 6.6dBi whip and replace with a smaller 2.1dBi option allows for a broader radiation pattern which is less likely to be affected by obstacles. These antennas are a popular choice for 4WDs and fleet vehicles. Key Features Elevated-Feed Base Fibreglass Whip with Black Heat Shrink Barrel Style Stainless Steel Spring (Black) Heavy Duty Braid Copper Element Ground Independent Design Pre-terminated FME Connector 6.6dBi Gain Length: 970mm In the box 6.6dBi Antenna Whip (AE4018B) Elevated-Feed Base & Lead Assembly (ABL017B) Medium Duty Spring (AS002B) FME -> PL259 Adaptor (AD503)

GME 640MM ELEVATED FEED BASE, FIBREGLASS COLINEAR ANTENNA (6.6DBI GAIN) - BLACK-AE4018K This version of the AE4018 range combines a high quality elevated feed antenna base with GMEs most popular fibreglass whip. The whip is made from durable fibreglass with braided/ precision wound copper element, black heat shrink and chrome plated ferrule and is secured to the ALB002 elevated feed back to provide 6.6dBi gain, it is a fantastic all round antenna for use where a spring option is not required but will suit most mounting requirements and styling preferences. Elevated feed and fibreglass whip with Black heat shrink Heavy duty braid copper element Length 85cm Gain 6.6 dBi Ground independant In the Box: Antenna assembly 4.5 m low loss foam Coaxial cable and PL259

GME’s range of Australian Made AM/FM antennas lead the market in performance and quality. Our antennas are designed, engineered, and manufactured to ensure reliability and high performance in the harshest environments. Compatible with all stereo products, these antennas enhance the reception and clarity of any vehicle’s entertainment system. Made in AustraliaStainless Steel WhipGround Dependent Design700mm Length Key FeaturesStainless Steel WhipGround Dependent DesignLength: 700mm In the boxWhip Assembly (AEM6W)Antenna Base (AEM5B)Base, 5m Coaxial Cable and Automotive Plug (ABL003)

GME 780MM ELEVATED-FEED ANTENNA (6.6DBI GAIN) - BLACK-AE4017K1 Built to last, the UHF CB Antenna range from GME is durable and consists of a variety of mounting, design and length options. Our antennas have a fit for purpose construction to suit your requirements ranging from Heavy Duty Off Road to On-Glass and Multi-Band PCB Design. Featuring a variety of gain options, there is a GME UHF CB Antenna to suit every application. It is recommended that the AE4017 are not mounted on the bull bar of diesel vehicles Key Features Elevated-Feed Base Black Stainless Steel Whip Ground Independent Design 6.6dBi Gain Length: 780mm In the box 6.6dBi Stainless Steel Antenna Whip (AE4017) Elevated-Feed Base & Lead Assembly (ABL002) PL259 Antenna Plug (PL2592S)

GME UHF STAINLESS STEEL ANTENNA-AE4012K1 When mounting options are limited, or you prefer not to put a hole in the centre of your roof, then the elevated feed style of antenna suits the best. This version includes a sturdy 2.5mm wire diameter coil whip with the ABL002 elevated feed base. As with all stainless steel whips of this style, it is not recommended for installation on diesel 4WD vehicles. Product Details Elevated feed and stainless steel whip Ground Independent 6.6 dBi Length 780 mm In the Box: Antenna assembly 4.5 metres low loss foam Coaxial cable and PL259.

The AE3001 has been developed as a mobile UHF/VHF Digital TV Antenna with a rigid fiberglass design to suit the needs of both the heavy vehicle and caravanning industries. With linear-loaded sections to cover both the VHF & UHF digital TV channels, the antenna is factory tuned and requires no further adjustment. Intended for mobile applications, this antenna is packed with a standard mounting base, 5 meters of low loss coaxial cable and F-type connection. Made in Australia Black Fibreglass Whip Ground Dependent Design 820mm Length Key Features Black Fiberglass Whip Ground Dependent Design Length: 820mm In the box Whip Assembly (AW3001) Base Assembly with 5m Coaxial Cable (ABL021) F Type Male Twist-On Connector F Type to PAL Adaptor

GME 820MM FLEXIBLE SLIMLINE 6DBI UHF CB ANTENNA-AE4016 The AE4016 has been developed as a highly flexible 6dBi UHF CB Antenna to suit the needs of 4WD and Agricultural vehicles when travelling in rough terrain. Specially designed to be ground independent with a unique impedance transformer that allows for the whip to be removed from the base reducing clearance issues when mounted on vehicles. The highly flexible whip reduces the chance of damage when traveling in rugged terrain. This antenna is supplied with a mounting base, 5 meters of low-loss coaxial cable terminated with an FME connection. GME has a specialised design team with the ability to develop application specific antenna products. With a purpose-built facility based in Sydney, GME continues our on-going commitment and dedication to local Australian manufacturing. Local manufacturing ensures GME is able to produce the highest quality communications equipment tailored to the harsh Australian landscape. Key Features Highly Flexible 3.5mm Slimline Whip Ground Independent Design with Unique Impedance Transformer Complete Antenna Removable from Base Pre-terminated FME Connector Gain: 6dBi Length: 820mm In the box Whip Assembly (AW4016) Antenna Base / Transformer (AE4016B) Base Assembly with 5m Coaxial Cable and FME connector (ABL020) FME to PL259 Adaptor (AD503)

GME 860MM ELEVATED-FEED ANTENNA (6.6DBI GAIN) - BLACK-AE4017K2 GME’s range of elevated-feed UHF CB radio antennas provide a gain of 6.6dBi for a great all round performing antenna. Elevated-feed antennas provide high performance in virtually any mounting position. The elevated feed-design helps raise the radiating element above the vehicle roof or other obstructions to provide a strong, omni-directional pattern and high performance when mounted on a vehicle gutter, fender or bull bar. The ability to remove the 6.6dBi whip and replace with a smaller 2.1dBi option allows for a broader radiation pattern which is less likely to be affected by obstacles. These antennas are a popular choice for the heavy vehicle industry and fleet vehicles. It is recommended that the AE4017 are not mounted on the bull bar of diesel vehicles Key Features Elevated-Feed Base Black Stainless Steel Whip Light Duty Stainless Steel Spring Ground Independent Design Pre-terminated FME Connector 6.6dBi Gain Length: 860mm In the box 6.6dBi Stainless Steel Antenna Whip (AE4017) Elevated-Feed Base & Lead Assembly (ABL002F) Light Duty Spring (AS001) FME -> PL259 Adaptor (AD503)

GME ANTENNA ELEVATED FEED BASE 860MM AS001 SPRING AND WHIP 6.6DBI GAIN-AE4012K2 Features: Elevated feed and stainless steel whipParallel electro polished stainless steel springGround Independent6.6 dBiLength 860 mmIncluded: AE4012 Antenna, ABL002F Base & Lead Assembly, AS001 Light Duty Spring & AD503 Adaptor For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need. Part Number: AE4012K2

The new AT3700B Cellular antenna has been designed to meet the needs of a range of customers including 4WD, agriculture and heavy vehicle users. Covering the 690-960 / 1710-2170 / 2300-2700 / 3400-3800MHz bands, the AT3700B is a true Multi-band cellular antenna that is 5G ready. The AT3700B is ground-independent, lightweight and has an overall length of 915mm making it perfect for either bracket or bull bar mounting. The AT3700B is fitted with a 4.5 metre coax cable that is pre-terminated with a SMA connection, ensuring vehicle installation and connection to a cellular booster is quick and simple. The AT3700B delivers excellent LTE coverage across existing mobile phone networks ensuring you always remain connected, even in areas with limited or poor cellular network coverage. GME has a specialised design team with the ability to develop application specific antenna products. With a purpose-built facility based in Sydney, GME continues our on-going commitment and dedication to local Australian manufacturing. Local manufacturing ensures GME is able to produce the highest quality communications equipment tailored to the harsh Australian landscape. Made in Australia16mm Parallel Black Fibreglass RadomeMedium Duty Spring BaseGround Independent Design5G ReadyPre-terminated SMA ConnectionFrequency Range - 690-960 / 1710-2170 / 2300-2700 / 3400-3800MHzCoax Cable Length – 4.5mNominal Gain - 6.5 / 4.5 / 6 / 6.5 dBiLength: 915mm Key Features16mm Parallel Black Fibreglass RadomeMedium Duty Spring BaseFixed Whip and BaseGround Independent Design5G ReadyPre-terminated SMA ConnectionFrequency Range - 690-960 / 1710-2170 / 2300-2700 / 3400-3800MHzCoax Cable Length – 4.5mNominal Gain - 6.5 / 4.5 / 6 / 6.5 dBiLength: 915mm In the boxComplete Antenna Assembly

Introducing the AE3700B UHF CB antenna, tailored for various users like 4WD, agriculture, and heavy vehicles. Here’s why it’s a top choice: Versatile Design: Ground-independent, lightweight, and a 915mm length suitable for bracket or bull bar mounting. Optimal Performance: Boasting a 6.6dBi gain, ensuring exceptional all-round performance. Easy Installation: Fitted with a 4.5-metre pre-terminated coax cable featuring an FME connection, facilitating quick setup with your UHF CB radio. GME’s exceptional features: Local Commitment: GME’s design team ensures application-specific products for the Australian market. Quality Manufacturing: GME’s local production guarantees top-tier communications equipment suited to the rugged Australian landscape. Key Features: Made in Australia 16mm Parallel Black Fibreglass Radome Medium Duty Spring Base Ground Independent Design Pre-terminated FME Connection Nominal Gain – 6.6 dBi Length: 915mm

GME’s range of elevated-feed UHF CB radio antennas provide a gain of 6.6 dBi for a great all round performing antenna. Elevated-feed antennas provide high performance in virtually any mounting position. The elevated feed-design helps raise the radiating element above the vehicle roof or other obstructions to provide a strong, omni-directional pattern and high performance when mounted on a vehicle gutter, fender or bull bar. The ability to remove the 6.6dBi whip and replace with a smaller 2.1dBi option allows for a broader radiation pattern which is less likely to be affected by obstacles. These antennas are a popular choice for the heavy vehicle industry and fleet vehicles. SpecificationsElevated-Feed BaseFibreglass Whip with Black Heat ShrinkLight Duty Stainless Steel SpringHeavy Duty Braid Copper ElementGround Independent DesignPre-terminated FME Connector6.6dBi GainLength: 930mmWhat's Included6.6dBi Antenna Whip (AE4018)Elevated-Feed Base & Lead Assembly (ABL002F)Light Duty Spring (AS001)FME - PL259 Adaptor (AD503)

GME’s range of elevated-feed UHF CB radio antennas provide a gain of 6.6 dBi for a great all round performing antenna. Elevated-feed antennas provide high performance in virtually any mounting position. The elevated feed-design helps raise the radiating element above the vehicle roof or other obstructions to provide a strong, omni-directional pattern and high performance when mounted on a vehicle gutter, fender or bull bar. The ability to remove the 6.6dBi whip and replace with a smaller 2.1dBi option allows for a broader radiation pattern which is less likely to be affected by obstacles. These antennas are a popular choice for 4WDs and fleet vehicles. SpecificationsElevated-Feed BaseFibreglass Whip with Black Heat ShrinkBarrel Style Stainless Steel SpringHeavy Duty Braid Copper ElementGround Independent DesignPre-terminated FME Connector6.6dBi GainLength: 970mm

9dBi Top Element and Coils to suit AE409L. Specifications Top Element to Suit AE409L 9dBi Gain What's Included Whip Only

The AE4016B is an Antenna Base and Transformer that is suited for the AE4016. Antenna Transformer Suits AE4016 1 Year Warranty Key Features Antenna Transformer Suits AE4016 In the box Base Only

The AW3001 is a 820mm UHF/VHF TV Antenna Whip. This whip suits the AE3001. This whip has been designed with a rigid fibreglass to suit the needs of both the heavy vehicle and caravanning industries. With linear-loaded sections to cover both the VHF & UHF digital TV channels, the antenna is factory tuned and requires no further adjustment. Intended for mobile applications, this antenna is packed with a standard mounting base, 5 meters of low loss coaxial cable and F-type connection. Made in Australia UHF/VHF Digital TV Whip Black Fibreglass Whip 820mm Length 1 Year Warranty Key Features UHF/VHF Digital TV Whip Black Fibreglass Whip Length: 820mm In the box Whip Only

Replacement Fibreglass Antenna Whip – Black. Suits AS001B Base Assembly. Made in AustraliaBlack Fibreglass Radome2.1dBi Gain495mm Length Key FeaturesBlack Fibreglass Radome2.1dBi GainWhip Length: 495mm In the boxWhip Only

Replacement Fibreglass Antenna Whip – White. Suits AS001 Base Assembly. White Fibreglass Radome 2.1dBi Gain 495mm Length Key Features White Fibreglass Radome 2.1dBi Gain Whip Length: 495mm In the box Whip Only

Replacement Fibreglass Antenna Whip – Black. Suits AS002B Base Assembly. Made in AustraliaBlack Fibreglass Radome6.6dBi Gain960mm Length Key FeaturesBlack Fibreglass Radome6.6dBi GainWhip Length: 960mm In the boxWhip Only

Replacement Fibreglass Antenna Whip – Black. Suits AS003B Base Assembly. Made in AustraliaBlack Fibreglass Radome6.6dBi Gain995mm Length Key FeaturesBlack Fibreglass Radome6.6dBi GainWhip Length: 995mm In the boxWhip Only

Replacement Fibreglass Antenna Whip – White. Suits AS003 Base Assembly. White Fibreglass Radome 6.6dBi Gain 995mm Length Key Features White Fibreglass Radome 6.6dBi Gain Whip Length: 995mm In the box Whip Only

Replacement Fibreglass Antenna Whip – Black. Suits AS004B Base Assembly. Made in AustraliaBlack Fibreglass Radome2.1dBi Gain465mm Length Key FeaturesBlack Fibreglass Radome2.1dBi GainWhip Length: 465mm In the boxWhip Only