GME 4 Inch Marine Box Speakers Pair - White -...
$159.00
GME TX667TP 2-Pack 1W UHF CB Handheld Radio
With an ultra-compact and lightweight mechanical design, up to 17 hours battery life, convenient USB charging, a high contrast backlit LCD screen, switchable transmission power (1/ 0.5 watt), and a user programmable scan function, the TX667 is the perfect entry-level UHF CB radio.
Includes:
2 x 1W UHF CB Handheld Radios (TX667)
2 x 1000mAh Li-Ion Battery Packs (BP020)
1 x AC Adaptor
1 x Twin Desktop Charger
2 x USB Multi-Charging Cables
2 x Belt Clips
Features:
Ultra compact & lightweight
Up to 17 hours battery life
USB multi-charging
High contrast, backlit LCD screen
1/ 0.5 Watt switchable transmission power
Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service
Specifications
Frequency Range TX: 476.425 - 477.4125 MHz
Number of Channels: 80, (75 voice, 2 telemetry RX only, 3 for future use)
Power Supply/Supply Voltage: Li-ion Rechargeable 3.7V DC, 1000 mA
Transmitter:
Transmit Frequency Response: 1 watt - 0.5 watt
Receiver:
Sensitivity: -121 dBm
Intermodulation Immunity: <5% (1 kHz 70%)
Audio Output Power: >0.5 watt max. (8 Ohm)
Dimensions (L x W x H): 52mm x 30mm x 90mm (without antenna)
Weight: 0.8 kg
Warranty:
2 Year Warranty Covered by GME
GME Xrs™ Connect 4Wd Pack Xrs-370C4P - TX4500S
$579.00
GME UHF CB RADIO 5 WATT DIN MOUNT WITH SCANSUITE - TX4500S
The GME TX4500S is a full-DIN sized radio ideal for installations in vehicles and is supplied with the DIN mounting hardware. Built for extreme conditions and comes with a rugged professional microphone with large ergonomic lever style PTT and priority switch buttons for reliable performance.
Its compact depth design allows for easy installation in confined spaces. The combination of the front facing speaker, large LCD screen and user controls along with the advanced features such as GME's ScanSuite made possible by the use of Digital Signal Processing make the GME TX4500S the radio of choice for 4WD owners.
Features:
TurboScan - At more than 40 channels per second, TurboScan enables the radio to scan all 80 channels in under 2 seconds and is the backbone to the ScanSuite scanning technology.
NetworkScan - NetworkScan allows radios that share the same CTCSS or DCS tone to have uninterrupted communication by dynamically switching to unused channels.
AutoSkip - When scanning in open or group scan the radio may continuously stop on nuisance channels. These channels may be temporarily skipped or easily removed from the scan cycle without deleting from scan memory.
User adjustable full spectrum LCD backlight
Advanced signal management
Dynamic volume control
Voice inversion scrambler
Large high contrast wide angle LCD display
Front facing speaker
Rotary squelch, channel and volume controls
Open and group scan
Rear mic option
Memory channel quick select
CTCSS and DCS
Duplex
5 digit selcall with quiet mode
Digital signal strength meter
95 user programmable extra receive channels
5 year warranty
What's in the box?
DIN-size UHF CB Radio (TX4500S)
Heavy Duty Microphone (MC553B)
Magnetic Microphone Mount (MB207)
12V DC Power Lead (LE09)
Mounting Hardware
Part Number: TX4500S
GME 5/1 Watt Uhf Cb Handheld Radio Including Accessories -...
$539.00
GME UHF CB RADIO 5 WATT COMPACT VALUE PACK - TX3500SVP
Synonymous with quality and reliability, the GME TX3500S is one of the most advanced 5 Watt UHF CB radios of its kind. Equipped with GME's newest digital scanning technology - ScanSuite and an impressive feature list that includes Digital Signal Processing, Advanced Signal Management, Dynamic Volume Control and 19 extra receive channels. With CTCSS and DCS this radio ensures more privacy and less interruption.
The compact size and unique slide-in mounting cradle makes installation simple and GME's intuitive user interface and controls ensure all of GME's technology is easy to use and optimises performance across the 80 channels. To help you kick off GME's new UHF Fixed Mount Radio this kit also comes with 2x antennas and mounting brackets to get you on the road and communicating in no time.
Features:
ScanSuite
Advanced signal management
Digital signal processing
Dynamic Volume Control
Wide/narrowband receive filters
CTCSS & DCS
Full spectrum backlighting
Open and group scan mode
Selectable priority channel
Active channel transmit in scan
Graphic signal strength meter
Adjustable squelch control
External speaker socket
Die-cast chassis
5 year warranty
The value pack include?
TX3500S radio unit
Rugged Microphone
AE4018K2 6.6 dBi gain antenna kit with stainless steel spring
AE4002 2.1 dBi unity gain replacement antenna whip
MB407SS universal Z bonnet/boot antenna mount
MB024SS universal bull bar antenna mount
Microphone Clip
Screw Pack
DC Lead
Mounting Cradle
Part Number: TX3500SVP
GME 5/1 Watt Uhf Cb Handheld Radio Including Accessories -...
$529.00
GME TX3510S 5W UHF CB Compact Radio with ScanSuite™
Synonymous with quality and reliability, the TX3510S is one of the most advanced 5 Watt UHF CB radios of its kind.
Featuring GME’s market-leading digital scanning technology, ScanSuite™, and an impressive feature list that includes Digital Signal Processing (DSP), Advanced Signal Management, Dynamic Volume Control, and 19 additional receive-only channels. The TX3510S also includes 5 Digit Selcall, CTCSS & DCS to minimise unwanted background noise and interruptions from other users.
The radio’s compact size and unique slide-in mounting cradle makes installation simple while the rugged die-cast metal chassis, intuitive user interface and controls ensure the radio is easy to use and delivers optimal performance in the harshest working conditions.
Includes:
1 x Compact UHF CB Radio (TX3510S)
1 x Heavy Duty Microphone (MC553B)
1 x Microphone Mounting Bracket (MB206)
1 x 12V DC Power Lead (LE09)
Mounting Hardware
Features:
5 Digit Selcall with Quiet Mode
Rugged Die-cast Metal Chassis for Harsh Environments
ScanSuite™ - Digital Scanning Technology
Full Spectrum LCD Back-lighting
Digital Signal Processing
Dynamic Volume Control
CTCSS & DCS
Specifications:
Frequency Range TX: 476.425-477.4125 MHz
Number of Channels: 80
Channel Spacing: 12.5 kHz
Operation Mode: Simplex or half Duplex with repeater talk around.
Scanning Speed: 25 ms per channel (40 channels per second).
Antenna Impedance: 50 Ohms nominal
Nominal Battery Voltage: 12 volts DC
Operating Voltage Range: 10-16 volts DC
Battery Polarity: Negative Earth
Standard Test Voltage: 13.8 volts DC
Over Voltage Protection: 30 volts DC maximum. At 18 volts DC the channel display flashes ‘Hi DC’ for 5 seconds on receive. The RF power is reduced and TX flashes on transmit.
Reverse Voltage Protection: Diode Crowbar
Overcurrent Protection: In-line 2 amp fuse
Operating Temperature: -10°C to 60°C
Compliant Specification: Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Warranty:
5 Year Warranty Covered by GME
GME 5/1 Watt Uhf Cb Handheld Radio Including Accessories -...
$679.00
The GME TX3350 is an 80-channel, feature-packed super compact UHF CB radio with the new SoundPath full-function LCD Speaker Microphone. The value pack also includes 2 interchangeable antenna whips 1 for rugged and 1 for flat terrain. There's also 2 antenna mounts for your bonnet and bull bar.
Features
Powered by Pure Sound DSP engine
Full-spectrum backlit LCD microphone with Soundpath speaker
User selectable open and group scan
User adjustable squelch
User-selectable duplex channels
User-selectable priority channel
104 in-built DCS codes
50 in-built CTCSS codes
5 digit Selcall with quiet mode
Five-year warranty
Australian design and manufactured
What's in the box?
Super Compact UHF CB Radio (TX3350)
LCD Speaker Microphone (MC634B)
Antenna Assembly (AE4018K3)
Antenna Whip (AE4002)
Antenna Mounting Bracket (MB407SS)
Bullbar Bracket (MB024SS)
Microphone Mounting Bracket (MB206)
12V DC Power Lead (LE09)
Mounting Hardware
Part Number: TX3350UVP
GME 5/1 Watt Ip67 Uhf Cb Handheld Radio - Yellow...
$549.00
The GME TX3350 is an 80 channel, feature packed super compact UHF CB radio with the new SoundPath full function LCD Speaker Microphone. The challenge was to create a unique solution that allowed a full function LCD Microphone that could house a built in speaker with clear audio all within a compact and ergonomic design. SoundPath diverts the audio through a unique convex path around the microphone bollard, whilst maintaining the compact size.
The TX3350 combines the unique combination of space saving benefits of a super compact size radio and full function speaker microphone all in the palm of your hand. The radio can now be discretely installed in almost any location within a vehicle and without the need for extension speakers. The GME TX3350 comes with some of GME's advanced features including Advanced Signal Management, Sound Path Speaker Mic, Clear Sound Digital Processing and GME Full Spectrum Backlighting to name a few.
Features:
Powered by Pure Sound DSP engineFull spectrum backlit LCD microphone with Soundpath speakerUser selectable open and group scanUser adjustable squelchUser selectable duplex channelsUser selectable priority channel104 in-built DCS codes50 in-built CTCSS codes5 digit selcall with quiet modeFive year warrantyAustralian design and manufacture
What's in the box?
Super Compact UHF CB Radio (TX3350)LCD Speaker Microphone (MC634B)Microphone Mounting Bracket (MB205)12V DC Power Lead (LE09)Mounting HardwarePart Number: TX3350
GME 5/1 Watt Ip67 Uhf Cb Handheld Radio - Blaze...
$359.00
TX3120SPNP Plug 'n Play UHF Radio Kit
Introducing the latest generation of portable UHF CB communication – TX3120S Plug ‘N’ Play.
This pack is easily installed into any vehicle within minutes and does not require any drilling, cutting or soldering. Aimed at the casual user TX3120S Plug ‘N’ Play is perfect for any convoy journey or rental vehicle.
Designed and engineered in Australia TX3120S incorporates the widest LCD in its class size, twin rotary controls, speaker microphone and ScanSuite - GMEs latest scanning technology to enable uninterrupted conversations.
When no longer required, all accessories pack away into the travel case supplied, ready for the next adventure.
Product Details
ScanSuite
Dynamic Volume Control
Selectable priority channel
Voice inversion scrambler
Memory channel quick select
CTCSS & DCS
Advanced signal management
Full spectrum backlighting
Active channel transmit in scan
Digital signal processing
Open and group scan mode
5 year warranty
In the Box:
TX3120S Super compact UHF CB radio
Compact Magnetic Antenna
Windscreen Suction Mount
12V DC Auxiliary Power Lead
Speaker Microphone
Convenient Travel Case
Mounting Accessories Pack
SKU: TX3120SPNP
GME 2 Watt Uhf Cb Handheld Radio - Quad Pack...
$319.00
Synonymous with quality and reliability, the GME TX3120S is one of the most advanced 5 Watt UHF CB radios of its kind. Equipped with GMEs newest digital scanning technology - ScanSuite and an impressive feature list that includes Digital Signal Processing, Advanced Signal Management and Dynamic Volume Control. With CTCSS and DCS this radio ensures more privacy and less interruption.
This super compact 5 watt robust radio is engineered to maximise features in limited space and has separate rotary user controls for volume and channel change, the widest LCD screen available on any super compact sized UHF and a new dynamic speaker microphone. These new and unique features improve usability and audio quality for a better UHF experience.
The GME TX3120S comes with some of GME's advanced features including Flip Mounting, Advanced Signal Management, Clear Sound Digital Processing to name a few.
Features:
ScanSuite
Dynamic Volume Control
Selectable priority channel
Voice inversion scrambler
Memory channel quick select
CTCSS & DCS
Advanced signal management
Full spectrum backlighting
Active channel transmit in scan
5 year warranty
Digital signal processing
Open and group scan mode
Diecast chassis
What's in the box?
Super Compact UHF CB Radio (TX3120S)
Speaker Microphone (MC311B)
Microphone Mounting Bracket (MB205)
12V DC Power Lead (LE09)
Mounting Hardware
Part Number: TX3120S
GME 2 Watt Uhf Cb Handheld Radio - Twin Pack...
$329.00
GME UHF CB RADIO 5 WATT SUPER COMPACT STARTER KIT - TX3100VP
This kit comes with the super compact TX3100DP 5 watt UHF CB Radio, a high performance 6.6dBi ground independent antenna and the stainless steel engine bay mounting bracket. With GME's TX3100 Starter Kit, you'll begin your UHF CB experience with everything you need from the get-go. The TX3100's super compact size and power, combined with its ease of use, makes it a perfect UHF CB radio for all types of users.
Coupled with the AE4018K2 high performance antenna and mounting bracket, this Starter Kit is all you'll ever need! GME engineering DNA is at the heart of these products, guaranteeing high performance in real world conditions and embedded with unique DSP radio technology and the highest quality material. The GME TX3100 radio is Australian designed and engineered and is one of the most advanced UHF Citizen Band radios available with its front mounted controls, is designed for unobtrusive mounting in modern vehicles.
Kit Contains
TX3100DP 5 watt UHF CB radio
Radio mounting bracket and screw pack
Microphone and microphone clip
DC power lead
MB407SS antenna mounting bracket
AE4018K2 antenna assembly
TX3100 UHF CB Radio Features
Powerful 5 watt output for maximum range
CTCSS and DCS Privacy
Digital Signal Processing
Advanced Signal Management
Dynamic Volume Control
Unique display flip function for mounting options
GME 5 year warranty applies to TX3100
AE4018K2 Antenna Features
Fibreglass co-linear antenna with 6.6 dBi gain.
High quality elevated feed for ground independence.
Electro-polished stainless steel heavy duty parallel spring.
4.5 metres low-loss coaxial cable and PL259 plug.
GME, the Australian leader in land-based and marine communications equipment, emergency signalling beacons and television signalling equipment has come up with a great easy to set up UHF CB Radio and Antenna Starter Kit. The TX3100VP Starter Kit makes it easy for those new to the world of CB radios.
Part Number: TX3100VP
GME 1 Watt Uhf Cb Handheld Radio - Twin Pack...
$269.00
GME UHF CB Radio 5 Watt Super Compact - TX3100DP
Features:
Digital Signal Processing
Advanced Signal Management
Dynamic Volume Control
Unique Display Flip Function
Adjustable squelch
Programmable scan function
CTCSS and DCS
Selectable duplex channels
External speaker socket
Five year warranty
Australian designed and engineered
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
Part Number: TX3100DP
MSA Black Towing Mirrors LC70-79 Landcruiser Switch Kit Included -...
$1,709.10
$1,899.00
Lc70-79 Landcruiser Switch Kit Included - 1984-09/2023 Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM450
Suits
Lc70-79 Landcruiser Switch Kit Included - 1984-09/2023
Colour
Black
Type
Power Fold
Key Features
Electric Kit – Includes an electric adjustment upgrade kit
Big Base – Reinforced big base mounting for extra stability
Indicators – Integrated indicators for improved road visibility
Powerfold – Power-fold function, mirrors fold in and out with the vehicle
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Power Fold Operation
When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts,
retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller.
This applies to vehicles with factory-fitted Electric Mirror Control only.
Specifications
Mirror Type: Towing Mirror (Power Fold)
Vehicle Fitment: Lc70-79 Landcruiser Switch Kit Included - 1984-09/2023
Colour: Black
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM450
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA Black Towing Mirrors Mitsubishi Triton 2015-02/2024 Electric, Indicators, Powerfold
$1,462.50
$1,625.00
Mitsubishi Triton 2015-02/2024 Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM1150
Suits
Mitsubishi Triton 2015-02/2024
Colour
Black
Type
Power Fold
Key Features
Electric – Electric mirror adjustment from inside the cabin
Indicators – Integrated indicators for improved road visibility
Powerfold – Power-fold function, mirrors fold in and out with the vehicle
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Power Fold Operation
When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts,
retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller.
This applies to vehicles with factory-fitted Electric Mirror Control only.
Specifications
Mirror Type: Towing Mirror (Power Fold)
Vehicle Fitment: Mitsubishi Triton 2015-02/2024
Colour: Black
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM1150
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA Black Towing Mirrors Py Ford Ranger/Ub Ford Everest 06/22-Curr...
$1,529.10
$1,699.01
Py Ford Ranger/Ub Ford Everest 06/22-Curr Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM2650
Suits
Py Ford Ranger/Ub Ford Everest 06/22-Curr
Colour
Black
Type
Power Fold
Key Features
Electric – Electric mirror adjustment from inside the cabin
Indicator – Integrated indicators for improved road visibility
Heat – Heated mirror glass to demist in cold or wet conditions
Bsm
Powerfold – Power-fold function, mirrors fold in and out with the vehicle
Temp Sensor – Outside temperature sensor built into the mirror housing
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Power Fold Operation
When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts,
retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller.
This applies to vehicles with factory-fitted Electric Mirror Control only.
Specifications
Mirror Type: Towing Mirror (Power Fold)
Vehicle Fitment: Py Ford Ranger/Ub Ford Everest 06/22-Curr
Colour: Black
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM2650
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA Chrome Towing Mirrors LC70-79 Landcruiser Switch Kit Included -...
$1,709.10
$1,899.00
Lc70-79 Landcruiser Switch Kit Included - 1984-09/2023 Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM451
Suits
Lc70-79 Landcruiser Switch Kit Included - 1984-09/2023
Colour
Chrome
Type
Power Fold
Key Features
Electric Kit – Includes an electric adjustment upgrade kit
Big Base – Reinforced big base mounting for extra stability
Indicators – Integrated indicators for improved road visibility
Powerfold – Power-fold function, mirrors fold in and out with the vehicle
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Power Fold Operation
When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts,
retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller.
This applies to vehicles with factory-fitted Electric Mirror Control only.
Specifications
Mirror Type: Towing Mirror (Power Fold)
Vehicle Fitment: Lc70-79 Landcruiser Switch Kit Included - 1984-09/2023
Colour: Chrome
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM451
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA Black Towing Mirrors Mitsubishi Triton 2015-02/2024 Electric, Indicators, Bsm
$888.30
$987.00
Mitsubishi Triton 2015-02/2024 Towing Mirrors
MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a
heavy-duty extension slide, extending out when towing and returning to a normal driving position when not.
Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point
of the towed vehicle.
Product Code
TM1102
Suits
Mitsubishi Triton 2015-02/2024
Colour
Black
Type
Non Power Fold
Key Features
Electric – Electric mirror adjustment from inside the cabin
Indicators – Integrated indicators for improved road visibility
Bsm
Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse
floats, tray backs and wider service bodies, or large vans and wide loads
Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs
Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design
Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles
ADR Compliant – meets Australian road-legal visibility requirements
Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions
Specifications
Mirror Type: Towing Mirror (Non Power Fold)
Vehicle Fitment: Mitsubishi Triton 2015-02/2024
Colour: Black
Adjustment: Electric
Sold As: Pair (left and right mirrors)
Product Code: TM1102
Includes
MSA 4X4's 5 Year Warranty
About MSA 4X4
MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining
most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to
withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers
to boats and horse floats. The mirror design is protected by patents and design registrations in Australia
and internationally.
MSA 4X4 Triton Mq Left Storage Drawer System - E1350-TRITMQ-LE-COM
$1,437.30
$1,597.00
MSA TRITON MQ LEFT STORAGE DRAWER SYSTEM-E1350-TRITMQ-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 E930A Generic Right Storage Drawer System - E930A-RIGHT-COM
$1,239.30
$1,377.00
MSA E930A GENERIC RIGHT STORAGE DRAWER SYSTEM -E930A-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 433mm
MSA 4X4 E1030 Generic Double Storage Drawer System - E1030-COM
$2,529.00
$2,810.01
LandCruiser 300 Series Double Storage Drawer
PRODUCT CODE: 41010
VEHICLE DATE: 07/2021-CurrentPRODUCT TYPE: Double Storage Drawer System
SUITS: Toyota Landcruiser 300 Series GXL/VX/SaharaToyota Landcruiser
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
MSA 4X4 E1100 Generic Left Storage Drawer System - E1100-LEFT-COM
$1,343.70
$1,493.00
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1100mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
MSA 4X4 Prado 120 Series Right Storage Drawer System -...
$1,264.50
$1,405.00
Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA 4X4 Landcruiser 200 Series Right Storage Drawer System -...
$1,264.50
$1,405.00
Suits Toyota Landcruiser 200 Series GXL/VX/Sahara
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA 4X4 Amarok Left Storage Drawer System - E1350-VWROK-LE-COM
$1,437.30
$1,597.00
Suits Volkswagon Amarok 2H, Volkswagen Amarok
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Simgle Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 E830 Generic Left Storage Drawer System - E830-LEFT-COM
$1,253.70
$1,393.00
MSA E830 GENERIC LEFT STORAGE DRAWER SYSTEM-E830-LEFT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 830mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 715mm
Intenral drawer width = 525mm
MSA 4X4 E1350 Generic Right Storage Drawer System - E1350-RIGHT-COM
$1,437.30
$1,597.00
MSA E1350 GENERIC RIGHT STORAGE DRAWER SYSTEM -E1350-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Prado 120 Series Left Storage Drawer System -...
$1,264.50
$1,405.00
Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande
MSA PRADO 120 SERIES LEFT STORAGE DRAWER SYSTEM-E930-PRA120-LE-COM
SUITS: Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande (models with rear aircon)
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA 4X4 Amarok Ad Blue Double Storage Drawer System -...
$2,876.40
$3,196.00
Suits Volkswagen Amarok 2H with AdBlue
MSA 4X4 AMAROK AD BLUE DOUBLE STORAGE DRAWER SYSTEM -E1350-VWROKAB-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA 4X4 Patrol Wagon Gu (Y61) Series 4-8 St Wagon...
$413.10
$459.00
MSA 4x4 Patrol Wagon GU (Y61) Series 4-8 ST Wagon Front Twin Seat Covers- GU39
SUITS: Patrol Wagon GU (Y61) Series 4-8 ST Wagon
Front twin bucket seats with console cover
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Patrol Wagon Gu (Y61) Series 9 Front Twin...
$516.60
$574.00
SUITS Patrol Wagon GU( Y61) Series 9 Wagon ST/ST Plus/ST Titanium/ST
MSA 4x4 Patrol Wagon GU (Y61) Series 9 Front Twin Seat Covers- GU36
SUITS: Patrol Wagon GU( Y61) Series 9 Wagon ST/ST Plus/ST Titanium/ST N-
Front twin bucket airbag seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Patrol Wagon Gu (Y61) Series 4-7 Stl Wagon...
$410.40
$456.01
Suits Patrol Wagon GU (Y61) Series 4-7 STL Wagon (Electric Seats)
MSA 4x4 Patrol Wagon GU (Y61) Series 4-7 STL Wagon ront Twin Seat Covers- GU40
SUITS: Patrol Wagon GU (Y61) Series 4-7 STL Wagon (Electric Seats)
Front twin bucket seats with access aircraft tables and console cover
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Bt50 Front & Rear Seat Covers - FRT516CO
$717.30
$797.01
MSA 4x4 BT50 Front & Rear Seat Covers- FRT516CO
SUITS: BT50
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Px Dual Cab + Mazda Bt50...
$781.20
$868.00
Suits Ranger PX Dual Cab + BT50 Dual Cab XTR/XT
MSA 4x4 Ranger PX Dual Cab + BT50 Dual Cab Front & Rear Seat Covers- FRT546CO
SUITS: Ranger PX 10/2011 - 05/2015 + BT50 08/2011 - 04/2015
Complete front and second row seat set - (FRT504 + FRT506)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Everest Ambiente/Trend Front & Second Row Seat Covers...
$926.10
$1,029.00
SUITS Everest Ambiente/Trend
MSA 4x4 Everest Ambiente/Trend Front & Second Row Seat Covers- FRT51213CO
SUITS: Everest Ambiente/Trend
Complete front and second row seat set - (FRT512 + FRT513)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Patrol Wagon Gu (Y61) Series 2-3 St Wagon...
$413.10
$459.00
SUITS Patrol Wagon GU (Y61) Series 2-3 ST Wagon
MSA 4x4 Patrol Wagon GU (Y61) Series 2-3 ST Wagon Front Twin Seat Covers- GU26
SUITS: Patrol Wagon GU (Y61) Series 2-3 ST Wagon
Front twin bucket seats with console cover
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Px2 Inc.+ Mazda Bt50 Xtr Dual...
$828.00
$920.00
MSA 4x4 Ranger PX2 Inc.+ BT50 XTR Dual Cab Front & Rear Seat Covers- FRT5167CO
SUITS: Ranger PX2 Inc. Facelift Model Dual Cab/Single Cab/Single Space Cab/XL/XLS/XLT/Wildtrak + BT50 XTR Dual Cab (Facelift) Series 2 Dual Cab XTR/XT
Complete front and second row seat set - (FRT516 + FRT507)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Patrol Gu (Y61)+ Patrol Gu Front Twin Seat...
$379.80
$422.00
MSA 4x4 Patrol GU (Y61)+ Patrol GU Front Twin Seat Covers- GU02
SUITS: Patrol GU (Y61) Series 1 DX/ST Wagon + Patrol Utilities GU (Y61) ST Ute
Front twin bucket seats with console cover
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 D-Max Ls Front & Second Row Seat Covers...
$828.00
$920.00
MSA 4x4 D-MAX LS Front & Second Row Seat Covers- ID024CO
SUITS: D-MAX SX
Complete front and second row seat set SX - (ID02 + ID04)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux 7Th Gen Sr5 + Hilux Sr5 Dual...
$458.10
$509.00
MSA 4x4 HiLux 7th Gen SR5 + HiLux SR5 Dual Cab Front Seat Covers- HL56
SUITS: HiLux 7th Gen SR5 Single/Extra Dual Cab (11/13- 10/15) + HiLux (08/09- 10/13) SR5 Single/Extra Dual Cab
Front twin bucket airbag seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux 7Th Gen Sr +Hilux Sr Single/Extra/Dual Cab...
$458.10
$509.00
MSA 4x4 HiLux 7th Gen SR +HiLux SR Single/Extra/Dual Cab Front Seat Covers- HL41
SUITS: HiLux 7th Gen SR Single/Extra/Dual Cab (11/13-10/15) + HiLux (05/05- 10/13) SR Single/Extra/Dual Cab
Front twin bucket airbag seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 D-Max Sx/Ls Front Seat Covers - ID02
$458.10
$509.00
MSA 4x4 D-MAX SX/LS Front Seat Covers- ID02
SUITS: D-MAX SX/LS
Front twin bucket airbag seats SX with console cover
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux Sr5 Single/Extra/Dual Cab Front Seat Covers -...
$413.10
$459.00
MSA 4x4 HiLux SR5 Single/Extra/Dual Cab Front Seat Covers- HL35
SUITS: HiLux SR5 Single/Extra/Dual Cab
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux 8Th Gen Single Cab Front Seat Covers...
$459.00
$510.00
MSA 4x4 HiLux 8th Gen Single Cab Front Seat Covers- HL63
SUITS: HiLux 8th Gen Single Cab
Front twin bucket airbag seats with integrated lumbar support and headrest does not remove
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux Sr Single/Extra/Dual Cab Front Seat Covers -...
$379.80
$422.00
MSA 4x4 HiLux SR Single/Extra/Dual Cab Front Seat Covers- HL40
SUITS: HiLux SR Single/Extra/Dual Cab
Front twin bucket seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux 8Th Gen Sr5 Dual Cab Leather And...
$459.00
$510.00
MSA 4x4 HiLux 8th Gen SR5 Dual Cab Leather and Electrics Front Seat Covers- HL64
SUITS: HiLux 8th Gen SR5 Dual Cab Leather and Electrics
Front twin bucket airbag seats with console cover and integrated lumbar support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Everest Ambiente/Trend Front Seat Covers - FRT512
$458.10
$509.00
MSA 4x4 Everest Ambiente/Trend Front Seat Covers- FRT512
SUITS: Everest Ambiente/Trend
Front twin bucket airbag seats with driver side access to lumbar adjuster lever on backrest, console cover and integrated lumbar support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux 7Th Gen Front & Second Row Seat...
$781.20
$868.00
MSA 4x4 HiLux 7th Gen Front & Second Row Seat Covers- HL568CO
SUITS: HiLux 7th Gen SR5 Single/Extra Dual Cab
Complete front and second row seat set - (HL56 + HL58)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Landcruiser 78 (03/07-10/09) Troop Carrier Front Seat Covers...
$379.80
$435.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Hilux GEN 5 & 6,1988 - 2004, RWD + 4WD
MSA 4X4 Hilux Single/Extra/Dual Cab Front & Second Row Seat...
$707.40
$786.01
MSA 4x4 HiLux Single/Extra/Dual Cab Front & Second Row Seat Covers- HL0257CO
SUITS: HiLux Single/Extra/Dual Cab
Complete front and second row seat set
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Pj/Pk + Mazda Bt50 Dx Front...
$458.10
$509.00
MSA 4x4 Ranger PJ/PK + BT50 DX Front Seat Covers- FRT511
SUITS: Ranger PJ/PK + BT50 DX
Front twin bucket airbag seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Pj/Pk + Mazda Bt50 Front Seat...
$379.80
$422.00
MSA 4x4 Ranger PJ/PK + BT50 Front Seat Covers- FRT502
SUITS: Ranger PJ/PK + BT50
Includes: Front Seat Covers
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Patrol Gu (Y61) Series 1 St Wagon Front...
$852.30
$947.00
MSA 4x4 Patrol GU (Y61) Series 1 ST Wagon Front & Second Row Seat Covers-GU029CO
SUITS: Patrol GU (Y61) Series 1 ST Wagon
Complete front and second row seat set - (GU02 + GU29)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
