Ford F-150 Lift Kits and Towing Mirrors

Massively improve your Ford F150’s cargo-carrying capabilities with the easy-access Pro Bed Rack System. It easily secures to the top of the load bed and frees up space in the load bed. Use the Pro Bed Rack-specific accessories, such as the Molle Panel and Recovery Device Mount, to customize your ride. This Pro Bed System is specifically designed to fit the Ford F-150 6.5 load bed. This System provides the frame to customize your Load Bed storage configuration. Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headboard Molle Panel, Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.  Secures to the load bed of the Ford F-150 6.5 with specific mounting brackets bolted to the existing factory mounting points.  Made of a combination of steel and aluminium, sealed in the same durable and corrosion resistant black powder-coating as Front Runner racks. The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net PBFF004S - Ford F-150 6.5' Bed (2009-Current) Pro Bed System Consisting of:1x PBAL1755 - Pro Bed Rack Aluminium Extrusions X- Large1x PBFF001 - Ford F-150 Crew Cab Pro Bed Rack Mounting System1x PBRA001 - Pro Bed Rack Universal Structural Components Material Used:Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 53kg (116.84lbs)Installed height from load bed ledge:520mm/ 20.47” Shipping Dimensions:Width: 640mm (25")Length: 1820mm (72")Height: 380mm (15") Shipping Weight:Weight: 53kg (117lbs)

CLEARVIEW Electric Raw Next Gen Towing Mirrors for FORD F-150 XLT 2023 (MY23) Upgrade your towing setup with the Clearview Electric Raw Next Gen Towing Mirrors, specifically designed for the FORD F-150 XLT 2023 (MY23). Built for reliable performance, these mirrors provide enhanced rear visibility and a raw finish ideal for custom applications. Featuring electric adjustment and essential safety functions, these mirrors are ideal for towing caravans, trailers, and heavy loads while maintaining comfort and control on the road. Key Features & Benefits ✔️ Electric Adjustment – Easy in-cabin mirror control ✔️ Heated Mirrors – Clear visibility in cold and wet conditions ✔️ Blind Spot Monitoring (BSM) – Improved driving safety ✔️ Integrated Indicators – Enhanced visibility on the road ✔️ OAT Sensor Compatibility – Supports outside temperature readings ✔️ Extendable Design – Better visibility when towing wide loads ✔️ Durable Construction – Built for long-term use ✔️ Raw Finish – Suitable for paint matching or functional use Vehicle Compatibility FORD | F-150 | XLT 2023 (MY23) Specifications Product Code: CVNG-FD-F150-HSTIEX Mirror Type: Next Gen Extendable Adjustment: Electric Finish: Raw (Unpainted) Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Raw Next Gen Towing Mirrors for FORD F-150 PLATINUM 2024 (MY24) Enhance your towing capability with the Clearview Electric Raw Next Gen Towing Mirrors, built for the FORD F-150 PLATINUM 2024 (MY24). These mirrors provide improved visibility, reliable performance, and a raw finish suitable for custom styling. Designed for practical towing use, these mirrors feature electric adjustment and essential safety functions, making them ideal for everyday towing and touring conditions. Key Features & Benefits ✔️ Electric Mirror Adjustment – Easy in-cabin control ✔️ Heated Mirrors – Maintains clear visibility in various weather conditions ✔️ Blind Spot Monitoring (BSM) – Added safety when changing lanes ✔️ Integrated Indicators – Improved on-road visibility ✔️ OAT Sensor Compatibility – Supports outside temperature readings ✔️ Extendable Design – Ideal for towing caravans and trailers ✔️ Heavy-Duty Construction – Built for long-term durability ✔️ Raw Finish – Suitable for paint matching or functional use Vehicle Compatibility FORD | F-150 | PLATINUM 2024 (MY24) Specifications Product Code: CVNG-FD-F150-HVFSYTIEX Mirror Type: Next Gen Extendable Adjustment: Electric Finish: Raw (Unpainted) Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Raw Next Gen Towing Mirrors for FORD F-150 LARIAT 2024 (MY24) Upgrade your towing setup with the Clearview Electric Raw Next Gen Towing Mirrors, specifically designed for the FORD F-150 LARIAT 2024 (MY24). Built for modern towing demands, these mirrors deliver enhanced rear visibility, advanced functionality, and a raw finish ideal for custom applications. Featuring power fold, electric adjustment, and integrated technology, these mirrors provide maximum convenience and safety—making them ideal for towing caravans, trailers, and heavy loads with confidence. Key Features & Benefits ✔️ Power Fold Function – Automatically folds in and out for added convenience ✔️ Electric Adjustment – Control mirror positioning from inside your vehicle ✔️ Heated Mirrors – Helps maintain clear visibility in cold or wet conditions ✔️ Blind Spot Monitoring (BSM) – Enhanced safety with integrated blind spot awareness ✔️ Integrated Indicators & Puddle Lights – Improved visibility and functionality ✔️ Memory Function – Retains preferred mirror positions ✔️ Camera Provision – Compatible with vehicle camera systems ✔️ OAT Sensor Compatibility – Supports outside air temperature readings ✔️ Extendable Design – Improves visibility when towing wide loads ✔️ Raw Finish – Ideal for custom paint matching Vehicle Compatibility FORD | F-150 | LARIAT 2024 (MY24) Specifications Product Code: CVNG-FD-F150-HVFSYTIEX Mirror Type: Next Gen Extendable Adjustment: Electric with Power Fold Finish: Raw (Unpainted) Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Raw Next Gen Towing Mirrors for FORD F-150 LARIAT 2023 (MY23) Upgrade your vehicle with the Clearview Electric Raw Next Gen Towing Mirrors, designed for the FORD F-150 LARIAT 2023 (MY23). Built for performance and versatility, these mirrors provide enhanced towing visibility and a raw finish for custom applications. Featuring power fold, electric adjustment, and advanced integrated features, these mirrors are ideal for towing caravans, trailers, and heavy loads with improved safety and convenience. Key Features & Benefits ✔️ Power Fold Function – Automatically folds for convenience and protection ✔️ Electric Adjustment – Easily adjust mirror angles from inside your vehicle ✔️ Heated Mirrors – Clear visibility in cold and wet conditions ✔️ Blind Spot Monitoring (BSM) – Enhanced awareness on the road ✔️ Integrated Indicators & Puddle Lights – Improved safety and functionality ✔️ Memory Function – Retains preferred mirror settings ✔️ Camera Provision – Compatible with vehicle camera systems ✔️ OAT Sensor Compatibility – Supports external temperature readings ✔️ Extendable Design – Improves visibility when towing wide loads ✔️ Raw Finish – Ready for custom paint matching Vehicle Compatibility FORD | F-150 | LARIAT 2023 (MY23) Specifications Product Code: CVNG-FD-F150-HVFSYTIEX Mirror Type: Next Gen Extendable Adjustment: Electric with Power Fold Finish: Raw (Unpainted) Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Chrome Next Gen Towing Mirrors for FORD F-150 XLT 2023 (MY23) Upgrade your towing setup with the Clearview Electric Chrome Next Gen Towing Mirrors, specifically designed for the FORD F-150 XLT 2023 (MY23). Built for reliable performance, these mirrors provide enhanced rear visibility and a premium chrome finish. Featuring electric adjustment and essential safety functions, these mirrors are ideal for towing caravans, trailers, and heavy loads while maintaining comfort and control on the road. Key Features & Benefits ✔️ Electric Adjustment – Easy in-cabin mirror control ✔️ Heated Mirrors – Clear visibility in cold and wet conditions ✔️ Blind Spot Monitoring (BSM) – Improved driving safety ✔️ Integrated Indicators – Enhanced visibility on the road ✔️ OAT Sensor Compatibility – Supports outside temperature readings ✔️ Extendable Design – Better visibility when towing wide loads ✔️ Durable Construction – Built for long-term use ✔️ Chrome Finish – Premium polished appearance Vehicle Compatibility FORD | F-150 | XLT 2023 (MY23) Specifications Product Code: CVNG-FD-F150-HSTIEC Mirror Type: Next Gen Extendable Adjustment: Electric Finish: Chrome Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Chrome Next Gen Towing Mirrors for FORD F-150 PLATINUM 2024 (MY24) Enhance your towing capability with the Clearview Electric Chrome Next Gen Towing Mirrors, built for the FORD F-150 PLATINUM 2024 (MY24). These mirrors deliver improved visibility, essential safety features, and a premium chrome finish. Designed for reliable performance, these mirrors feature electric adjustment and key integrated functions, making them ideal for towing and everyday driving conditions. Key Features & Benefits ✔️ Electric Adjustment – Easy mirror positioning from inside your vehicle ✔️ Heated Mirrors – Clear vision in cold and wet conditions ✔️ Blind Spot Monitoring (BSM) – Increased safety when changing lanes ✔️ Integrated Indicators – Improved road visibility ✔️ OAT Sensor Compatibility – Supports temperature readings ✔️ Extendable Design – Better visibility when towing ✔️ Durable Construction – Built for long-term use ✔️ Chrome Finish – Sleek and polished appearance Vehicle Compatibility FORD | F-150 | PLATINUM 2024 (MY24) Specifications Product Code: CVNG-FD-F150-HVFSYTIEC Mirror Type: Next Gen Extendable Adjustment: Electric Finish: Chrome Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Chrome Next Gen Towing Mirrors for FORD F-150 LARIAT 2024 (MY24) Upgrade your towing setup with the Clearview Electric Chrome Next Gen Towing Mirrors, specifically designed for the FORD F-150 LARIAT 2024 (MY24). Built for modern towing demands, these mirrors deliver enhanced rear visibility, advanced functionality, and a premium chrome finish. Featuring power fold, electric adjustment, and integrated technology, these mirrors provide maximum convenience and safety—ideal for towing caravans, trailers, and heavy loads with confidence. Key Features & Benefits ✔️ Power Fold Function – Automatically folds in and out ✔️ Electric Adjustment – In-cabin control for precise positioning ✔️ Heated Mirrors – Maintains clear visibility in all conditions ✔️ Blind Spot Monitoring (BSM) – Improved driving safety ✔️ Integrated Indicators & Puddle Lights – Enhanced visibility and function ✔️ Memory Function – Retains mirror settings ✔️ Camera Provision – Compatible with vehicle camera systems ✔️ OAT Sensor Compatibility – Supports outside temperature readings ✔️ Extendable Design – Ideal for towing wide loads ✔️ Chrome Finish – Premium polished appearance Vehicle Compatibility FORD | F-150 | LARIAT 2024 (MY24) Specifications Product Code: CVNG-FD-F150-HVFSYTIEC Mirror Type: Next Gen Extendable Adjustment: Electric with Power Fold Finish: Chrome Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Chrome Next Gen Towing Mirrors for FORD F-150 LARIAT 2023 (MY23) Upgrade your vehicle with the Clearview Electric Chrome Next Gen Towing Mirrors, designed for the FORD F-150 LARIAT 2023 (MY23). Built for performance and versatility, these mirrors deliver enhanced towing visibility and a premium chrome finish. Featuring power fold, electric adjustment, and advanced integrated features, these mirrors provide improved safety and convenience when towing caravans, trailers, and heavy loads. Key Features & Benefits ✔️ Power Fold Function – Automatically folds for convenience ✔️ Electric Adjustment – In-cabin mirror control ✔️ Heated Mirrors – Clear visibility in all weather ✔️ Blind Spot Monitoring (BSM) – Increased awareness on the road ✔️ Integrated Indicators & Puddle Lights – Enhanced functionality ✔️ Memory Function – Saves preferred mirror positions ✔️ Camera Provision – Supports vehicle camera systems ✔️ OAT Sensor Compatibility – External temperature support ✔️ Extendable Design – Ideal for towing wide loads ✔️ Chrome Finish – Premium polished look Vehicle Compatibility FORD | F-150 | LARIAT 2023 (MY23) Specifications Product Code: CVNG-FD-F150-HVFSYTIEC Mirror Type: Next Gen Extendable Adjustment: Electric with Power Fold Finish: Chrome Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Black Next Gen Towing Mirrors for FORD F-150 XLT 2023 (MY23) Upgrade your towing setup with the Clearview Electric Black Next Gen Towing Mirrors, specifically designed for the FORD F-150 XLT 2023 (MY23). Built for reliable performance, these mirrors provide enhanced rear visibility and a clean OEM-style black finish. Featuring electric adjustment and essential safety functions, these mirrors are ideal for towing caravans, trailers, and heavy loads while maintaining comfort and control on the road. Key Features & Benefits ✔️ Electric Adjustment – Easy in-cabin mirror control ✔️ Heated Mirrors – Clear visibility in cold and wet conditions ✔️ Blind Spot Monitoring (BSM) – Improved driving safety ✔️ Integrated Indicators – Enhanced visibility on the road ✔️ OAT Sensor Compatibility – Supports outside temperature readings ✔️ Extendable Design – Better visibility when towing wide loads ✔️ Durable Construction – Built for long-term use ✔️ Black Finish – Factory-style appearance Vehicle Compatibility FORD | F-150 | XLT 2023 (MY23) Specifications Product Code: CVNG-FD-F150-HSTIEB Mirror Type: Next Gen Extendable Adjustment: Electric Finish: Black Fitment: Direct replacement About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring...

CLEARVIEW Electric Black Next Gen Towing Mirrors for FORD F-150 PLATINUM 2024 (MY24) Enhance your towing experience with the Clearview Electric Black Next Gen Towing Mirrors, specifically designed for the FORD F-150 PLATINUM 2024 (MY24). Built for modern vehicles, these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance. Featuring electric adjustment, these mirrors allow precise positioning from inside your vehicle, making it easier to maintain clear rear vision when towing caravans, trailers, and heavy loads. Key Features & Benefits ✔️ Electric Mirror Adjustment – Easily control mirror positioning from inside your vehicle ✔️ Next Gen Design – Modern styling with enhanced functionality ✔️ Extendable Towing Mirrors – Improves visibility when towing wide loads ✔️ Dual Mirror System – Flat and convex mirrors reduce blind spots ✔️ Heavy-Duty Construction – Built for Australian towing and touring conditions ✔️ Black Finish – Clean, OEM-style appearance Vehicle Compatibility FORD | F-150 | PLATINUM 2024 (MY24) Specifications Product Code: CVNG-FD-F150-HVFSYTIEB Mirror Type: Next Gen Extendable Towing Mirrors Adjustment: Electric Finish: Black Fitment: Direct replacement Why Choose Next Gen Towing Mirrors? Clearview Next Gen mirrors are designed to provide enhanced visibility and improved towing safety. With their extendable design and wide viewing angles, they help reduce blind spots and give you better control when towing in all conditions. About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions. Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads. Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle types, styling preferences, and towing requirements. Clearview products are trusted by touring drivers and towing users for their durability and practical design. Key Product Range Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing Mirror Accessories & Replacement Parts – Components for maintenance and upgrades Towing & Vehicle Accessories – Additional products to enhance towing setups Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance— helping drivers maintain clear visibility and confidence when towing in all conditions.

CLEARVIEW Power Fold Black Next Gen Towing Mirrors for FORD F-150 LARIAT 2024 (MY24) Upgrade your towing capability with the Clearview Power Fold Black Next Gen Towing Mirrors, designed specifically for the FORD F-150 LARIAT 2024 (MY24). Built for modern towing demands, these mirrors deliver superior rear visibility, advanced functionality, and a sleek OEM-style finish. Featuring power fold and electric adjustment, these mirrors provide maximum convenience and safety—allowing you to easily position and fold your mirrors when navigating tight spaces or parking. Ideal for towing caravans, trailers, and heavy loads with confidence. Key Features & Benefits ✔️ Power Fold Function – Automatically folds in and out for convenience and protection ✔️ Electric Mirror Adjustment – Adjust mirror angles from inside your vehicle ✔️ Next Gen Design – Modern styling with enhanced functionality ✔️ Extendable Towing Mirrors – Improves visibility when towing wide loads ✔️ Dual Mirror System – Flat and convex mirrors reduce blind spots ✔️ Heavy-Duty Construction – Built for Australian towing and touring conditions ✔️ Black Finish – Clean, factory-style appearance Vehicle Compatibility FORD | F-150 | LARIAT 2024 (MY24) Specifications Product Code: CVNG-FD-F150-HVFSYTIEB Mirror Type: Next Gen Extendable Towing Mirrors Adjustment: Electric with Power Fold Finish: Black Fitment: Direct replacement Why Choose Next Gen Towing Mirrors? Clearview Next Gen mirrors are designed for drivers who want advanced features and improved towing safety. With extended reach and enhanced adjustability, they provide a wider field of vision—helping reduce blind spots and making towing safer and more controlled. About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions. Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads. Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle types, styling preferences, and towing requirements. Clearview products are trusted by touring drivers and towing users for their durability and practical design. Key Product Range Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing Mirror Accessories & Replacement Parts – Components for maintenance and upgrades Towing & Vehicle Accessories – Additional products to enhance towing setups Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance— helping drivers maintain clear visibility and confidence when towing in all conditions.

CLEARVIEW Power Fold Black Next Gen Towing Mirrors for FORD F-150 LARIAT 2023 (MY23) Upgrade your towing capability with the Clearview Power Fold Black Next Gen Towing Mirrors, designed specifically for the FORD F-150 LARIAT 2023 (MY23). Built for modern towing demands, these mirrors deliver superior rear visibility, advanced functionality, and a sleek OEM-style finish. Featuring power fold and electric adjustment, these mirrors provide maximum convenience and safety—allowing you to easily position and fold your mirrors when navigating tight spaces or parking. Ideal for towing caravans, trailers, and heavy loads with confidence. Key Features & Benefits ✔️ Power Fold Function – Automatically folds in and out for convenience and protection ✔️ Electric Mirror Adjustment – Adjust mirror angles from inside your vehicle ✔️ Next Gen Design – Modern styling with enhanced functionality ✔️ Extendable Towing Mirrors – Improves visibility when towing wide loads ✔️ Dual Mirror System – Flat and convex mirrors reduce blind spots ✔️ Heavy-Duty Construction – Built for Australian towing and touring conditions ✔️ Black Finish – Clean, factory-style appearance Vehicle Compatibility FORD | F-150 | LARIAT 2023 (MY23) Specifications Product Code: CVNG-FD-F150-HVFSYTIEB Mirror Type: Next Gen Extendable Towing Mirrors Adjustment: Electric with Power Fold Finish: Black Fitment: Direct replacement Why Choose Next Gen Towing Mirrors? Clearview Next Gen mirrors are designed for drivers who want advanced features and improved towing safety. With extended reach and enhanced adjustability, they provide a wider field of vision—helping reduce blind spots and making towing safer and more controlled. About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions. Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads. Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle types, styling preferences, and towing requirements. Clearview products are trusted by touring drivers and towing users for their durability and practical design. Key Product Range Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing Mirror Accessories & Replacement Parts – Components for maintenance and upgrades Towing & Vehicle Accessories – Additional products to enhance towing setups Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance— helping drivers maintain clear visibility and confidence when towing in all conditions.

The HSP Twin Load Bar (4 Bar System) is a purpose-built load carrying solution designed for the FORD F150 fitted with the HSP Roll R Cover Series 3.5. Engineered for strength, stability, and seamless integration, it provides a reliable platform for both work and touring setups. Featuring a four-bar configuration, this system delivers improved load distribution and increased stability across the tub area. It is ideal for mounting accessories, carrying equipment, and supporting more demanding load setups. Constructed with high-strength materials, the Twin Load Bar system ensures consistent support and durability while maintaining a clean, integrated appearance with the Roll R Cover system. Designed specifically for compatibility with the Roll R Cover S3.5, it preserves full functionality while providing a practical and versatile mounting platform. Key Features Designed for FORD F150 Dual Cab (5'5" & 6'5" tub) Compatible with HSP Roll R Cover Series 3.5 Four-bar system for enhanced stability and load distribution Provides expanded mounting surface for accessories High-strength construction for reliable performance Maintains full Roll R Cover functionality Clean, integrated design matched to vehicle profile Suitable for work, touring, and everyday use Vehicle Compatibility FORD F150 Dual Cab (5'5" & 6'5" tub) Installation Designed for Roll R Cover S3.5 mounting Secure and stable fitment Professional installation recommended Why Choose HSP Twin Load Bar Enhanced stability with four-bar system Optimised load distribution across the tub Strong and durable construction Seamless integration with Roll R Cover systems

60PSI Ultimate Series Airbag Kit – 2" Raised | FORD F150 RAPTOR (2021+) Heavy-duty load support for lifted setups. The Ultimate Series 60PSI Airbag Kit is engineered to deliver maximum suspension support, improved stability, and enhanced control for vehicles running a 2" lift. Designed specifically for the FORD F150 RAPTOR (2021+), this kit helps maintain correct ride height and handling when towing or carrying heavy loads. Key Benefits Designed for vehicles with a 2" suspension lift Heavy-duty 60PSI air springs for increased load capacity Reduces rear-end sag under towing or heavy loads Improves vehicle stability and handling Adjustable air pressure for different load conditions Vehicle Fitment FORD | F150 RAPTOR | 2021+ (2" Lifted) Product Overview The Ultimate Series Airbag Kit is built for drivers running lifted suspension setups who need reliable load support. Whether towing, touring, or carrying heavy gear, this system helps keep your vehicle level and under control. Specifically engineered for 2" raised applications, it ensures proper fitment and performance without compromising suspension geometry. Heavy-Duty Performance 60 PSI pressure rating for maximum load support Ideal for towing, off-road touring, and heavy-duty use Helps prevent bottoming out under load Improves ride quality and comfort when loaded Features Vehicle-specific design for accurate fitment Compatible with lifted (2") suspension systems Suitable for 4WD applications Durable construction for long-term reliability Specifications Series: Ultimate Series Part Number: 95090RULT Pressure Rating: 60 PSI Application: 2" Raised Suspension Drive Type: 4WD Kit Type: Ultimate Airbag Kit Why Choose Ultimate Series Higher load capacity compared to standard airbag kits Designed specifically for lifted vehicles Improves safety and control under heavy load Reliable performance in demanding conditions FAQs Is this compatible with standard suspension?No, this kit is specifically designed for vehicles with a 2" lift. Will this lift my vehicle further?No, it supports load and maintains ride height but does not increase lift height. Is this suitable for towing?Yes, it is ideal for towing and carrying heavy loads. What makes this different from standard kits?This Ultimate Series kit supports up to 60 PSI and is designed for lifted applications. Built for Lifted Setups Maintain control, stability, and ride height with a heavy-duty airbag system designed specifically for lifted vehicles and demanding conditions.

60PSI Ultimate Series Airbag Kit – Standard Height | FORD F150 RAPTOR (2021+) Maximum load support for serious towing and heavy-duty use. The Ultimate Series 60PSI Airbag Kit is designed to deliver superior suspension support, improved stability, and enhanced control when carrying heavy loads or towing. Built specifically for the FORD F150 RAPTOR (2021+), this heavy-duty system maintains ride height while providing adjustable air support for demanding conditions. Key Benefits Heavy-duty 60PSI air springs for increased load capacity Reduces rear-end sag when towing or carrying heavy loads Improves vehicle stability, handling, and safety Maintains correct ride height under load Adjustable air pressure to suit different driving conditions Vehicle Fitment FORD | F150 RAPTOR | 2021+ Product Overview The Ultimate Series Airbag Kit is engineered for drivers who require maximum performance from their suspension system. Whether towing, touring, or carrying heavy equipment, this kit provides the support needed to maintain control and comfort. Designed as a standard height solution, it integrates seamlessly with factory suspension while enhancing load-carrying capability. Heavy-Duty Performance 60 PSI pressure rating for higher load support Ideal for towing, work vehicles, and off-road touring Helps prevent bottoming out under heavy loads Improves ride quality when fully loaded Features Vehicle-specific design for precise fitment Suitable for 4WD applications Standard height configuration Durable construction for long-term reliability Specifications Series: Ultimate Series Part Number: 95090ULT Pressure Rating: 60 PSI Height: Standard Height Drive Type: 4WD Kit Type: Ultimate Airbag Kit Why Choose Ultimate Series Higher load capacity compared to standard airbag kits Designed for demanding towing and load applications Improves safety and vehicle control under stress Reliable performance in tough conditions FAQs Does this lift the vehicle?No, this is a standard height kit designed to support load and maintain ride height. Is this suitable for towing?Yes, it is designed specifically for heavy-duty towing and load support. What makes this different from standard kits?This Ultimate Series kit supports up to 60 PSI, offering greater load capacity and performance. Is it vehicle-specific?Yes, it is designed for FORD F150 RAPTOR (2021+) for proper fitment. Built for Heavy Loads Upgrade your suspension with a high-performance airbag system designed to handle serious weight, improve stability, and keep your vehicle level under load.

Turn your Ford-150 into the ultimate gear carrier with the Pro Bed Rack System and a Slimline II Rack. Now you can enjoy easy side access to all the Pro Bed Pro Bed Rack-specific accessories, such as the Molle Panel and Recovery Device Mount, while taking advantage of the extra free space in the load bed. Customize your Slimline II Rack for any adventure thanks to the 55 plus available rack accessories. This Pro Bed Rack Kit is specifically designed to fit the Ford F-150 6.5' load bed. Included in this Kit is the a 1425mm/56.1" x 1964mm/77.32" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket,Pro Bed Rack Headboard Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck. Secures to the bed of the Ford F-150 6.5' with specific mounting brackets. Drilling is required for fitment.  The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please PBFF004T - Ford F-150 6.5' Bed (2009-Current) Pro Bed Rack Kit Consisting of:4x FASS025 - Foot Set / 70mm - 80mm1x PBFF004S - Ford F-150 6.5" Bed (2009-Current) Pro Bed System1x RRSTJ10 - SLII Tray - 1425mm(W)X1964mm(L) Material Used:Black epoxy powder - coated T6 aluminiumInstalled height from load bed ledge:640mm/ 25.19" Approximate Installed Weight: 83kg (182.98lbs) Shipping Dimensions:Width: 640mm (25")Length: 1820mm (72")Height: 490mm (19") Shipping Weight:Weight: 83kg (183lbs)

The HSP Load Bar. A roll top cross bar rack that is perfect for snow trips with the family, a tour de neighbourhood in some excessively tight lycra, or even a perfect spot to mount the shovel for your extremely competitive sandcastle building. Full Metal Frame The HSP Load Bar has a full metal frame meaning that your precious cargo are resting on a solid foundation. Roll R Cover Specific Design The Load Bar is designed specifically to suit the HSP Roll R Cover. Which means installation is as simple as can be. All you do is slide the assembled roll top cross bar rack into the HSP Roll R Cover T channel and away you go. Additionally, the product-specific design perfectly compliments the Roll R Cover… Compatible with Common Accessories The HSP Load bar has a common channel that allows you to use accessories compatible with awesome roll top roof rack manufacturers such as Rhino-Rack, Thule, and Yakima. Compatibility FORD USA F-150

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years

What makes the S3.5 Roll R Cover So Special? HSP 4x4 did the impossible. They created the worlds most advanced retractable cover, packed with patented features, made it look incredible, made it work with your factory sports bar, your factory remote, even your mobile phone and even priced it lower than less feature-packed imported units 100% Australian Manufactured Yes, that’s right, the Roll R cover is the only 100% Australian made roll top, regardless of other companies sneaky play on words. On top of building them in Australia, HSP 4x4 decided to dig a bit deeper and have the manufacturing done in their custom-built facilities in Country Victoria, which has created so many Aussie jobs and is something they are very proud of. HSP 4x4 also design and test the units locally. World First Triple Operation The choice is literally in your hands! The HSP Roll R Cover gives you three methods of operation. Your factory remote, yes that’s right your existing factory remote automatically controls the unit A smart touchpad. Built into our super-sleek side rails, which allows you to open and close the unit with an effortless tap. And for security, the touchpad only works when your vehicle is unlocked. Mobile Phone Application and SIRI integration: Simply download the HSP 4×4 App on your iPhone or Android device to control your roll top. Plus a bonus for Apple users and it even works your iWatch and Air pods with Siri integration. Compatability Whether you’re a weekend warrior, the ultimate handyman or just a ute lover we made sure that the HSP 4x4 Roll R cover works for you. With the ability to retain your sports bars, ladder racks or cross bars the HSP electric roller cover truly allows you to customise your tub. Sports Bar Compatible Roll Top - Tired of sticking out? Not only can the HSP electric roller cover retain your factory bars, but the side rails also have pre-mapped insertion points so there is no additional height added. Ladder Rack Compatible Roll Top - The sky is the limit. If you have a big load, the Load Rack ladder rack system mounted to the Roll R Cover is perfect for you. Crossbar compatible Roll Top - Camping, snowboarding, mountain biking and pretty much anything else adventurous is now easier with the HSP Roll R Cover and Loadbar set up. Simply slide your load bar into the existing tracks and away you go! Horizon LED Light Bar A full length LED light is built into our canister meaning that you will have more than enough light for any of your night-time activities. You can also adjust the LED settings through the HSP App including light intensity and timing.  Super Simple Installation Fitting a HSP Roll R Cover is so simple! The roll-top itself is clamp-on, the electrics are plug and play, the unit is pre-programmed to your remote and the sports bars slot into pre-mapped insertion points. Water Protection Water issues are a thing of the past... The HSP Roll R Cover has a 6 point water flow system that drains at 60 litres per minute out of 4 oversized drainage points. Additionally, a new curtain grate drainage and the full-length gutter system and custom-designed seals ensure your tools and belongings are kept nice and dry from rain. Features Manufacturing Quality: Compliant to ISO9001 Curtain Material: Aluminium  Side Rail Material: Aluminium  Finish: Powdercoated Mannix Black LED Light Voltage: 12v Compliant with: EN 60529 Ed. 2.2: 2013: IP66 Remote Range: Same as Vehicle  Transmitter Coding: 220 constant rolling code Warranty: 3 years

Haul more with this full-size, tough-as-nails Ford F-150 5.5' rack kit, which will free up your precious load bed cargo space. This kit creates a full-size rack that sits above your Ford F-150 5.5' truck bed and contains the Slimline II tray (1575mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov\ Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.12kg (75.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 33.8kg (74lbs)

Haul more with this full-size, tough-as-nails Ford F-150 6.5' rack kit, which will free up your precious load bed cargo space. This kit creates a full-size rack that sits above your Ford F-150 truck bed and contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the supplied Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.44kg (86.95lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 33.8kg (74lbs)

This kit creates a full-size rack that sits above your Ford F-150’s (2015 +) 6.5' load bed with roll top. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1560mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing roll top rails. This kit creates a full-size rack that sits above your Ford F-150’s (2015 +) 6.5' load bed with roll top. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1560mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing roll top rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:3x LASS027 - Leg Spacer 6mm (Pair)3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM08 - SLII Tray - 1475mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.58kg (63.01lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18")Length: 1730mm (68")Height: 265mm (10")Shipping Weight:Weight: 37.9kg (83lbs)

Get ready to massively up the gear-carrying capacity in the load bed area of your Ford F-150 with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55 + available other rack accessories can go on the Slimline II—no more excuses for leaving any gear behind. This Pro Bed Rack Kit is specifically designed to fit the Ford F-150 Crew Cab load bed. Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket,Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck. Secures to the bed of the Ford F-150 Crew Cab with specific mounting brackets. Drilling is required for fitment.  The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty* Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x PBFF001S - Ford F-150 Crew Cab (2009-Current) Pro Bed System3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L) Material Used:Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 76.38kg (168.39lbs) Shipping Dimensions:Width: 650mm (26")Length: 1720mm (68")Height: 480mm (19") Shipping Weight:Weight: 80kg (176lbs)

This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling is required for installation.   This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.NOTE: Moon roof tilt function not operational with under rack table fitment. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 1 x FAFF004 - Ford F-150 Super Crew (2009-Current) Foot Rails - by Front Runner1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumhigh strength steel Approximate Installed Weight 26kg (58lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.   Shipping Dimensions: Width 450mm (17.7")Length 1750mm (69")Height 300mm (11.8")   Shipping Weight: Weight 34kg (75lbs)

This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling into the vehicle's roof is required. This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling into the vehicle's roof is required. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x FAFF001 - Ford F-150 Super Crew (2009-Curr) Foot Rails/Low1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.81kg (74.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 300mm (12")Shipping Weight:Weight: 33kg (73lbs)

Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does. Light Bar Wind Fairing for the Ford F-150 Super Crew (2015-2020) Slimsport Roof Rack Kit / Lightbar ready Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount Designed to direct airflow over the rack and accessories, reducing drag and wind noise Helps reduce fuel consumption while carrying bulky loads A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain Brackets and installation hardware included Works with or without a sunroof Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H Weight:4.55kg (10lbs)

Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption. A wind fairing for the Ford F150 Super Crew (2015-2020) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Note: Works with or without a sunroof. Please contact our help center if you are unsure. Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H Weight:4.02kg (8.9lbs)

Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does. Lightbar wind fairing for the Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H Weight:4.55kg (10lbs)

Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing adds a bold look while channeling air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.   A wind fairing for the Ford Ranger T6 / Wildtrak / Raptor (2012-2022) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Works with or without a sunroof. Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H Weight:4.02kg (8.9lbs)

Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down. Lightbar wind fairing for Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.    Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting instructionsMaterials used:Black powder coated steelProduct Dimensions:1405mm (55.3") L x 210mm (8.3") W x 206mm (8.1") HWeight:4.55kg (10lbs)

Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look. A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Note: Does not work on models without a sunroof. Please contact our help center if you are unsure. Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H Weight:4.02kg (8.9lbs)

This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation. This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab.Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x FAFF001 - Ford F-150 Super Crew (2009-Curr) Foot Rails/Low1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.81kg (74.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 310mm (12")Shipping Weight:Weight: 30kg (66lbs)

Transport all your adventure gear safely over the bed of your Ford F-150 Super Crew with this pair of strong, sleek, low-profile Pickup Bed Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.02kg (26.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 8.8kg (19lbs)

Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 5.5' Super Crew with these three low-profile, powder coated aluminum Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 5.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 16.46kg (36.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 235mm (9")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 13.6kg (30lbs)

Transport all your adventure gear safely over the bed of your Ford F-150 Super Crew with this pair of strong, sleek, low-profile Pickup Bed Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.27kg (27.05lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 8.8kg (19lbs)

Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 6.5' Super Crew with these low-profile, corrosion-free aluminum Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 6.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 30.36kg (66.93lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1685mm (66")Length: 165mm (6")Height: 230mm (9")Shipping Weight:Weight: 13.2kg (29lbs)

This tough, lightweight steel and aluminum cargo system secures to the bed of your Ford F-150, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this great cargo system, your Ford F-150 can easily fulfill its gear-carrying duties on any adventure or road trip.   This Pro Bed System is specifically designed to fit the Ford F-150 Crew Cab load bed. This System provides the frame to customize your Load Bed storage configuration. Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.  Secures to the bed of the Ford F-150 Crew Cab with specific mounting brackets. Drilling is required for fitment. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks. The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net. For further information on installation, please see the fitment instructions in the INSTALL tab. Consisting of:1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large1x PBFF001 - Ford F-150 Crew Cab Pro Bed Rack Mounting System1x PBRA001 - Pro Bed Rack Universal Structural Components Material Used:Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 51.04kg (112.52lbs) Shipping Dimensions:Width: 650mm (26")Length: 1450mm (57")Height: 480mm (19") Shipping Weight:Weight: 52kg (114lbs)

Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 Raptor 5.5' with these two low-profile, corrosion-free aluminum Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.02kg (26.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1580mm (62")Height: 275mm (11")Shipping Weight:Weight: 12.2kg (27lbs)

Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 Raptor 5.5' with these three low-profile, corrosion-free aluminum Load Bars. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 16.46kg (36.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1685mm (66")Length: 165mm (6")Height: 355mm (14")Shipping Weight:Weight: 16.4kg (36lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRFF033 - Ford F-150 ReTrax XR 5'6" (2004-Current) Double Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)   Material used: Black epoxy powder - coated T6 aluminium   Approximate Installed Weight: 6.8kg (14.99lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6"); Length: 1690mm (67"); Height: 155mm (6")   Shipping Weight: Weight: 9kg (20lbs)

This triple set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Ford F-150 when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 9kg (19.84lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1690mm (67")Height: 150mm (6")Shipping Weight:Weight: 10kg (22lbs)

This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Ford F-150 when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual. A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. Allows for gear to be mounted above the pickup’s load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.8kg (14.99lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1690mm (67")Height: 155mm (6")Shipping Weight:Weight: 9kg (20lbs)

Haul more with this full-size, tough-as-nails Ford F-150 Raptor 5.5' rack kit, which will free up your precious load bed cargo space. This kit creates a full-size rack that sits above your Ford F-150 Raptor truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1358mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.12kg (75.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 37kg (81lbs)

Double up the loading space on your Ford F-150 with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford F-150. This kit creates a full-size rack that sits above your Ford F-150’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1560mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 32.68kg (72.05lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10") Shipping Weight:Weight: 34kg (75lbs)

Double up the loading space on your Ford F-150 with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford F-150. This kit creates a full-size rack that sits above your Ford F-150’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1964mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP10 - SLII Tray - 1575mm(W)X1964mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 39.57kg (87.24lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10") Shipping Weight:Weight: 41kg (90lbs)

Double up the loading space on your Ford F-150 with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Ford F-150. This kit creates a full-size rack that sits above your Ford F-150’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 2368mm) and 8 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. * Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:4x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP12 - SLII Tray - 1575mm(W)X2368mm(L) Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Approximate Installed Weight: 44.17kg (97.38lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10") Shipping Weight:Weight: 46kg (101lbs)

Load up additional overland accessories such as jerry cans, boxes and light bars on your Ford F-150 Super Crew when fitted with a Cab Over Camper. The highly versatile Slimline II Roof Rack is compatible with a wide range of accessories, allowing you to gear up for any adventure. This 752mm/29.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Super Crew. No drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.  All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x FAFF007 - Ford F-150 Super Crew (2009-Current) Short Foot Rail1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 17.03kg (37.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 315mm (12")Shipping Weight:Weight: 23kg (51lbs)

Building your next adventure has never been easier with this Ford F-150 Super Crew (2015-2020) Slimsport Roof Rack Kit / Lightbar ready. The wind fairing comes with a 40” cutout, so you can mount a light bar for expeditions at all hours. The rack is low-profile and durable, while compatible with Front Runner accessories so you can take on the Great Outdoors! The Slimsport roof rack is ready to play. This low-profile flat deck Slimsport rack has a load carrying area of 1676mm (66“) x 1411mm (55.6“). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small – by Front Runner for most Front Runner side mount accessories (sold separately). Included in the Ford Crew Cab (2015-2020) Slimsport  40" Light Bar Wind Fairing has a cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately), and allows full operation of the moon roof. Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Note: Drilling required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of:1x KSFF001 - Ford F-150 Super Crew (18-Curr) SlimSport Roof Rack1x RRAC239 - Ford F-150 Super Crew (15-20) SRack LBFairing1x RRAC971 - Protection Strip Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:1676mm (66") L x 1411mm (55.6") W x 113mm (4.4") H Approximate Installed Weight: 32.74kg (72.18lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions:Width: 325mm (13")Length: 1705mm (67")Height: 230mm (9") Shipping Weight:Weight: 34kg (75lbs)