Drawers, Exhaust, and Flares

MSA 4X4 E830 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E830-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 830mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 715mm Internal drawer width = 525mm  

MSA AMAROK RIGHT STORAGE DRAWER SYSTEM -E1350-VWROK-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Suits Volkswagon Amarok 2H Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA HILUX 7TH GEN LEFT STORAGE DRAWER SYSTEM-E1350-HILUX7-LE-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

MSA 4X4 PRADO 120 DOUBLE STORAGE DRAWER SYSTEM-E930-PRA120-COM Designed from the ground up, the way a quality 4WD storage system should be. SUITS Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 E930 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E930-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height  215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 E1100 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E1100-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1100mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

SUITS: Toyota Landcruiser 100 Series (models with rear aircon) Toyota Landcruiser FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee   ARTS INCLUDED: Left Drawer Module Left Fit Kit Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm WEIGHT 46.2kg

One of the lightest drawer systems ever made, the ADR Crash Test Certified MSA 4X4 Explorer Aluminium Storage Drawer System boasts more storage space than most other systems with the same outside dimensions! Patented “Pro-Glide” technology smoothly handles up to 250kg per pair of drawers providing smooth opening under heavy loads as well as 100% drawer extension and access. The entire drawer comes out further than the frame! No hard to reach items in our drawers and no unpacking of contents to reach items at the back! Designed from the ground up to establish the way a quality 4WD system should be, the MSA 4X4 Explorer Aluminium Storage Drawer System delivers many more features than any other 4WD Drawer system in the market today!We've re-set the benchmark in quality 4WD Drawer Systems from a safety, functionality and quality perspective. Features include: 100% aluminium construction with anodised aluminium components means that our drawers are super strong, lightweight and have a lifetime corrosion resistance. This also means that our drawers are lighter than many generic steel drawers in the market – a very important feature as the GVM (Gross Vehicle Mass is the maximum weight that a vehicle can carry including its own weight) is crucial to the safe and efficient operation of a vehicle. The patented “stay-open block” in our Explorer Aluminium Storage Drawer System allows the drawer to remain in an open position, even on a 30-degree slope! This is another important safety feature which prevents a fully loaded, open drawer from unexpectedly slamming shut whilst still in use. This “stay-open block” also doubles as two electrical contacts, that when the drawer is open, create an electrical circuit without any moving wires to power the included LED strip light. The patented internal LED strip light delivers increased practicality, complete with manual override switch conveniently located in the drawer face. The patented “Pro-Glide” system of our MSA 4X4 Explorer Aluminium Storage Drawer System utilises the side of the drawers and the frame as the actual slide unit, which means that no usable storage space inside the drawers are lost to traditional side slide runners. The over extension using custom sealed bearings, removes the need for additional slide components, maximising storage space. More internal drawer space is achieved with equivalent external frame dimensions of other drawers. Flush finish internal drawer sides provide greater storage practicality without any internal folds to hinder how larger items are placed inside the drawers or removed from the drawers. Flush fitting removable wing kits in our Explorer Aluminium Storage Drawer Systems are designed to clip or bolt in, allowing access to storage areas beside the drawers! This is great for customers who want to store items such as their second battery or compressor in that available space. If a customer has a Fridge Drop Slide or other item hard mounted onto the wing kit, access under the drawer wings are also possible due to the unique removable front facing wing panels. Floor extensions are included as standard with Dual Cab Ute wing kits which are the wing pieces behind the drawers to create a full flat surface at the back of the tray, preventing items from falling behind the drawers. Our Explorer Aluminium Storage Drawer System's injection moulded design-registered lock system with purpose built injection-moulded frame & aluminium components help deliver a 100% safe and secure lock system that cannot be levered open from underneath (unlike other drawers), providing safe storage. An anodised knurled aluminium handle has been designed for comfort & practicality. A dust & water resistant designed seal around the front panel resists ingress, making our drawers the perfect storage solution for road trips through the red dust centre of Australia. Stainless steel fasteners are also used throughout where possible for a rust free and problem free life! Explorer Aluminium Storage Drawer Systems are available in 3 different lengths to suit popular wagons and dual cab utes. The 930 drawer system is 945mm long (overall complete drawer length including handle lock) and suits vehicles such as the Ford Everest, Toyota Fortuner, 150 Series Prado, 120 Series Prado and 76 Series Wagons. The 1030 drawer system is 1045mm long (overall complete drawer length including handle lock) and suits vehicles such as the 200 Series & 100 Series Land Cruisers. The 1350 drawer system is 1365mm long (overall complete drawer length including handle lock) and suits most dual cab utes! We recommend that any tub liners are removed before installing our drawer system as the tub liners do not follow the contours of the tub precisely enough and won’t result in an ideal fit. Whilst every detail has been taken into account and engineered specifically to deliver the best and most reliable 4WD Storage Drawer System available in the market, MSA 4X4’s Lifetime Guarantee ensures that all Explorer Aluminium Storage Drawer System customers have the peace of mind that if anything were to go wrong, that they’d be looked after. 1030 Complete Double Drawer System to suit Nissan Patrol GU ST Y61 (Series 4-10) 10/04-2016 Complete Kit includes: Left & Right 1030 Drawer Modules Left & Right Wing & Fit Kits Double Drawer Join Kit Double Trim

MSA 4X4 Double Storage Drawer System for Toyota LandCruiser 76 Series (2007-Current) Transform the storage capability of your Toyota LandCruiser 76 Series with the MSA 4X4 Double Storage Drawer System. Designed and engineered specifically for touring, work, and off-road applications, this premium storage solution keeps your gear organised, secure, and easily accessible while maximising available cargo space. Featuring MSA 4X4's patented drawer slide technology, each drawer extends 100% beyond the frame, providing complete access to stored equipment without the frustration of hard-to-reach items. Fully sealed stainless steel bearings and nylon rollers deliver smooth, quiet operation even under heavy loads, while reducing overall system weight. Constructed from lightweight yet incredibly strong aluminium with anodised components and stainless steel fasteners throughout, this drawer system is built to withstand years of harsh touring and off-road use while remaining corrosion resistant. Key Features Designed specifically for Toyota LandCruiser 76 Series (2007-Current). 100% drawer extension for complete access to stored items. Patented Stay-Open Block keeps drawers open even on slopes up to 30 degrees. Fully sealed stainless steel bearings with nylon rollers. Internal LED light strip activates at full drawer extension. Safe and secure anti-lever lock system. Dust-resistant seals help keep stored items clean. Removable wing and face panels provide access to additional storage areas. Premium Construction Lightweight aluminium drawer modules. Anodised aluminium components for enhanced durability. Rust-resistant stainless steel fasteners throughout. Engineered for strength, longevity, and corrosion resistance. Reduced overall weight compared to traditional steel drawer systems. Safety & Compliance Crash-tested and ADR compliant. Tested to ADR3/02, ADR34/01, and ADR42 standards. Includes cargo barrier mounting points. Includes child restraint anchor points. Designed to improve cargo security and occupant safety. What's Included Left Drawer Module Left Fit Kit Left Wing Kit Right Drawer Module Right Fit Kit Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire Complete Wing Kits Cargo Barrier Mounting Points Child Restraint Points Compatible Accessories Drawer Stacking Kit (40001) Drawer Divider (EDDIV-A) Left Power Panel (EPP-Left) Right Power Panel (EPP-Right) Pre-Cut Panels (SP0506 & SP0507) Large Battery Box (40018) Slimline Battery Box (40019) Explorer Storage Bag Range Deluxe Coffee Kits Dimensions External Dimensions Overall Length: 945mm (including handle lock) Overall Height: 275mm Overall Width (Single Drawer): 510mm (excluding wings) Internal Drawer Dimensions Internal Length: 830mm Internal Width: 433mm Drawer Height: 211mm Usable Height: 215mm Specifications Product Code: E930A-LC76-COM Vehicle Fitment: Toyota LandCruiser 76 Series (2007-Current) Product Type: Double Storage Drawer System Weight: 86.2kg Warranty Backed by the renowned MSA 4X4 Lifetime Guarantee for long-term confidence and reliability.

MSA 4X4 1350 Left Storage Drawer Module - E1350-Left The MSA 4X4 1350 Left Storage Drawer Module is a premium storage solution designed to keep your tools, recovery gear, camping equipment, and valuables organised, secure, and easily accessible. Featuring MSA's innovative drawer technology, this heavy-duty storage module delivers exceptional durability, smooth operation, and maximum storage efficiency for touring, work, and off-road applications. Built from lightweight yet incredibly strong materials, the drawer extends 100% from the frame, providing complete access to your stored gear without the frustration of reaching into the back of the drawer. Fully sealed stainless steel bearings and nylon rollers ensure smooth, quiet operation while maintaining excellent load-carrying performance. The patented Stay-Open Block allows the drawer to remain open even on slopes of up to 30 degrees, while the integrated LED light strip automatically illuminates the drawer contents when fully extended for added convenience in low-light conditions. Key Features 100% drawer extension for full access to stored equipment. Patented Stay-Open Block keeps the drawer open on slopes up to 30°. Fully sealed rust-resistant stainless steel bearings. Nylon roller system for smooth and quiet operation. Integrated LED light strip activates at full extension. Safe and secure lock system. Dust-resistant seal helps keep contents clean. Corrosion-resistant stainless steel fasteners throughout. Benefits Provides organised and secure storage for touring and work equipment. Allows quick access to tools and gear. Improves vehicle storage efficiency. Protects contents from dust and dirt. Built to withstand demanding off-road conditions. Offers reliable long-term performance. What's Included Left Storage Drawer Module Cargo Barrier Mounting Points Child Restraint Points Compatible Accessories Left Fit Kit Single Width Trim Drawer Stacking Kit (40001) Drawer Divider (EDDIV) Large Battery Box (40018) Slimline Battery Box (40019) Explorer Storage Bag Bundle (20013) Explorer Storage Bag Large (20012) Explorer Storage Bag Medium (20011) Explorer Storage Bag Small (20010) Deluxe Coffee Kit Black (45042) Deluxe Coffee Kit Cream (45043) Dimensions External Dimensions Length: 1365mm (including handle lock) Width: 530mm Height: 275mm Internal Drawer Dimensions Internal Length: 1250mm Internal Width: 453mm Drawer Height: 211mm Usable Height: 215mm Specifications Product Code: E1350-Left Product Type: Single Storage Drawer Module Fitment: Generic Fit Weight: 48.2kg Important Information MSA 4X4 Storage Drawer Systems are designed to fit directly to the vehicle tub body. Not compatible with vehicle tub liners. Tub liners must be removed prior to installation. Warranty Covered by the renowned MSA 4X4 Lifetime Guarantee for complete confidence and long-term reliability.

SUITS: Ford Everest UA Ford Everest 7 Seat Model, No removable wing/face panels FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit Left Wing Kit (includes base frame) Right Drawer Module Right Fit Kit (includes base frame) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm WEIGHT 85.6kg

SUITS: Volkswagon Amarok 2H Volkswagen Amarok FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm WEIGHT 112.4kg

HiLux 8th Gen Double Storage Drawer System VEHICLE DATE: 10/2015-Current PRODUCT TYPE: Double Storage Drawer System SUITS: Toyota HiLux 8th Gen Toyota HiLux FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee Note: MSA 4X4 Storage Drawer Systems are designed to fit directly into the vehicle tub body. It is not designed to fit in conjunction with a tub liner. Tub liners MUST be removed before installation.

TORQIT Performance Exhaust Manifold – SUZUKI JIMNY 2018+ Designed specifically for SUZUKI JIMNY models (XL 5-Door, GLX & Lite 3-Door), TORQIT’s Performance Exhaust Manifold replaces the restrictive factory unit to deliver improved exhaust flow, increased power, and enhanced engine efficiency. Developed over 5 years, this high-performance manifold is engineered to reduce back pressure and improve overall engine performance—perfect for drivers looking to maximise power or reduce engine strain when towing or under load. Key Benefits Increased exhaust flow for improved power and torque Reduced engine strain under load or towing conditions Enhanced exhaust note and efficiency Direct replacement for factory manifold Premium Construction Manufactured in Australia, TORQIT Performance Headers are mandrel bent from premium-grade steel. Unlike restrictive cast iron factory manifolds, the smooth and consistent pipe diameter ensures unrestricted airflow and improved performance. Mandrel bent steel for maximum flow and precision fitment Consistent pipe diameter reduces back pressure High-quality construction for long-term durability Turbo X Ceramic Coating Each manifold is coated with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves longevity and performance Installation & Compatibility Bolt-on installation Compatible with SUZUKI JIMNY 2018+ (XL, GLX, Lite) Recommended Upgrade For maximum performance gains and a deeper, more aggressive exhaust note, pair this manifold with a TORQIT Cat-Back Exhaust System. Warranty & Origin 3-year product warranty Proudly made in Australia

TORQIT Performance Exhaust Headers – CHEVROLET SILVERADO 2020+ Part Number: TPH03 Upgrade your CHEVROLET SILVERADO with TORQIT’s Performance Exhaust Headers, designed to replace the restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide a noticeable improvement in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Silverado headers feature a long tube design, where the pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports better fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance gains, pair these headers with a TORQIT Silverado Performance Exhaust System. Designed with a single 3.5" pipe into twin 3" tailpipes, it delivers a powerful V8 note without cabin drone. Warranty & Origin Made in Australia Engineered for long-term performance and reliability

TORQIT Performance Exhaust Headers – DODGE RAM DT 5.7L (2019+) Part Number: TPH02 Upgrade your DODGE RAM DT with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT RAM headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with a TORQIT Performance Exhaust System to eliminate restriction and achieve optimal power, torque, and sound. Installation Professional installation recommended Bolt-on fitment compatible with factory components Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: DODGE RAM DT 5.7L Year: 2019+

TORQIT Performance Exhaust Headers – NISSAN PATROL Y62 5.6L (2013+) Part Number: TPH01 Upgrade your NISSAN PATROL Y62 with TORQIT Performance Exhaust Headers, designed to replace restrictive factory exhaust manifolds and deliver increased airflow, improved power, and enhanced engine efficiency. Whether you're chasing more performance or reducing engine strain when towing or under load, these headers provide noticeable gains in power, torque, and exhaust note. Key Benefits Increased exhaust flow for improved power and torque Reduced back pressure for better engine efficiency Enhanced exhaust note and overall performance Ideal for towing and heavy-load applications Long Tube Design TORQIT Y62 headers feature a long tube design, where pipes merge further away from the engine. This improves exhaust scavenging, increases airflow, and delivers stronger torque and horsepower across the rev range. Improves exhaust gas flow and engine efficiency Enhances torque and horsepower output Supports improved fuel efficiency during cruising Premium Mandrel Bent Construction Manufactured in Australia, these headers are mandrel bent from premium-grade steel, ensuring smooth, consistent pipe diameter for unrestricted airflow and precise fitment. Mandrel bent steel for maximum flow Consistent diameter reduces back pressure High-quality, durable construction Turbo X Ceramic Coating Each header is finished with TORQIT’s advanced Turbo X ceramic coating, providing a thermal barrier rated up to 1000°C. This protects against extreme heat and corrosion while maintaining a sleek, long-lasting finish. Heat resistant up to 1000°C Prevents cracking and flaking Improves durability and performance Recommended Upgrade For maximum performance, pair these headers with TORQIT Y62 Patrol Performance Exhaust and High Flow Catalytic Converters to eliminate restriction and achieve optimal power, torque, and sound. Installation Estimated installation time: 5–6 hours Professional installation recommended (requires hoist and mechanical expertise) Bolt-on fitment compatible with factory components Important Notes Installing headers on the Y62 Patrol removes primary catalytic converters and may trigger O2 sensor warning lights. An ECU tune such as TORQIT ModuleMap is recommended to prevent this. Features Long tube primary pipes Mandrel bent construction Tough ceramic coating Bolt-on installation 3-year product warranty Made in Australia Additional Information Vehicle: NISSAN PATROL Y62 5.6L Series: Series 1–5 (2013+) Weight: 11 kg

3" Turbo Back Twin Performance Exhaust for Next-Gen V6 Ford Ranger Raptor (2023 Onwards) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or tackling challenging off-road conditions. Offer available while stocks last. Upgrade your 2023+ Ford Ranger Raptor V6 with Torqit's premium 3" Turbo Back Twin Performance Exhaust System. Designed to deliver a deeper, tougher exhaust note while maintaining factory bi-modal functionality, this system is engineered using premium 304-grade stainless steel for exceptional durability, corrosion resistance, and long-lasting performance both on and off-road. Built with thick-walled stainless steel, precision mandrel bends, an X-pipe, and high-flow Euro 6 catalytic converters, this exhaust maximises airflow while producing a refined performance sound throughout the entire rev range. Designed for straightforward DIY installation, it bolts directly into place without requiring a hoist. Features & Benefits Designed for Next-Gen Ford Ranger Raptor V6 (2023 onwards) 3" Turbo Back Twin Performance Exhaust System Retains factory bi-modal exhaust functions Premium 304-grade stainless steel construction for maximum strength and corrosion resistance Brushed stainless steel tubing up to 2mm thick X-pipe design improves exhaust flow and enhances exhaust note High-flow Euro 6 200 CPSI catalytic converters Fully mandrel bent piping for optimum exhaust flow and precise fitment Internal and external TIG welded flanges for superior strength and leak prevention Heavy-duty brackets with 10mm laser-cut flanges Single centre muffler delivers a deeper exhaust note throughout the rev range Choice of Black or Brushed Stainless Steel exhaust tips Maintains stock ground clearance Compatible with spare tyres up to 35" DIY bolt-together installation Backed by up to a 10-year warranty on stainless steel diesel exhaust systems (unless otherwise stated for the vehicle) Installation The Torqit Next-Gen Ranger Raptor Exhaust is designed as a bolt-together DIY system for straightforward installation. Approximate installation time: 1.5 hours No hoist required Complete fitment kit included Installation instructions included Premium Stainless Steel Construction Your exhaust system is exposed to constant heat, vibration, and harsh off-road conditions. Torqit uses brushed stainless steel tubing up to 2mm thick to maintain structural integrity after bending while providing outstanding durability and resistance to cracking. The thicker material also produces a deeper exhaust note with reduced cabin drone compared to thinner exhaust systems. 304 Grade Stainless Steel Manufactured from premium 304-grade stainless steel, this exhaust offers excellent strength, corrosion resistance, and easy maintenance. Its higher chromium and nickel content provides superior durability in demanding environments, making it ideal for vehicles regularly exposed to water crossings, coastal conditions, and extreme temperatures. Unlike lower-grade stainless steels that develop surface rust over time, 304-grade stainless steel only develops light browning from heat exposure and can be polished back to its original finish. Precision TIG Welding Every system features internal and external TIG welded flanges to maximise strength, minimise structural fatigue, prevent cracking, and eliminate exhaust gas leaks. This premium welding process produces clean, accurate welds that enhance both durability and long-term reliability. Mandrel Bent Performance Each exhaust is fully mandrel bent to maintain consistent internal pipe diameter throughout every bend. This ensures smoother exhaust flow, reduced back pressure, consistent pipe strength, and accurate vehicle fitment. Key Features Factory bi-modal exhaust functionality 3" Turbo Back Twin exhaust system Premium 304-grade stainless steel construction Brushed stainless steel tubing up to 2mm thick Fully mandrel bent system X-pipe for improved airflow and sound High-flow Euro 6 200 CPSI catalytic converters Single centre muffler Choice of Black or Brushed Stainless Steel tailpipe finishes Internal and external welded flanges 10mm laser-cut flanges Heavy-duty mounting brackets Maintains stock ground clearance Fits spare tyres up to 35" DIY bolt-together installation Approximate 1.5-hour installation Complete fitment kit included Up to 10-year warranty on stainless steel diesel exhaust systems (unless otherwise stated) Manufacturing Information This is a manufactured item. While key components may be kept in stock, final assembly and coating are completed to order and may require additional time before dispatch.

3" TO 4" PERFORMANCE EXHAUST WITH 650MM EXTENSION FOR TOYOTA LANDCRUISER 200 SERIES (WITH DPF) FREE PEDAL TORQ® THROTTLE CONTROLLER PACK INCLUDED (PT1036) For a limited time, receive a FREE Pedal Torq® Throttle Controller Pack with the purchase of this TORQIT Performance Exhaust. The Pedal Torq® Throttle Controller reduces accelerator lag and delivers sharper throttle response, making it the perfect companion to your new TORQIT exhaust. Together, they provide improved drivability, quicker acceleration and a more responsive driving experience whether you're towing, touring or driving off-road. Offer available while stocks last. Enhance the performance and efficiency of your Toyota LandCruiser 200 Series with TORQIT's premium 3" to 4" Performance Exhaust featuring a 650mm extension section. Specifically designed for vehicles equipped with a Diesel Particulate Filter (DPF), this premium exhaust system improves airflow, lowers exhaust gas temperatures (EGTs), and delivers a deeper exhaust note while maintaining excellent drivability. Manufactured from premium stainless steel, this heavy-duty exhaust system is built to withstand Australia's demanding touring, towing and off-road conditions. The larger diameter design allows exhaust gases to flow more efficiently, helping your engine perform at its best whether towing a caravan, tackling challenging terrain or covering long distances. KEY FEATURES 3" to 4" performance exhaust system 650mm extension section included Designed for Toyota LandCruiser 200 Series models fitted with a DPF Improves exhaust flow and engine efficiency Helps reduce exhaust gas temperatures (EGTs) Premium stainless steel construction Corrosion-resistant finish for long-term durability Heavy-duty design for towing, touring and off-road use Bolt-on installation for straightforward fitment Engineered for reliable long-term performance PERFORMANCE BENEFITS Improved exhaust flow Enhanced engine responsiveness Reduced exhaust gas temperatures (EGTs) Improved towing performance Deep, refined exhaust note Built for demanding Australian conditions VEHICLE COMPATIBILITY Toyota LandCruiser 200 Series Vehicles equipped with a Diesel Particulate Filter (DPF) INSTALLATION This exhaust system features a bolt-on design for simplified installation. Professional fitting is recommended to ensure correct alignment and optimum performance. IMPORTANT INFORMATION Please confirm vehicle compatibility before ordering, particularly if your vehicle has aftermarket accessories or modifications. Contact our team if you require assistance selecting the correct exhaust system for your LandCruiser.

TORQIT DPF Back 3" Twin to 4" Single Performance Exhaust for Toyota LandCruiser 200 Series with ARB Frontier Tank Upgrade your Toyota LandCruiser 200 Series with the TORQIT HS8138XMSS-4 DPF Back Performance Exhaust, specifically engineered for 4.5L diesel models (10/2015–2022) fitted with an ARB Frontier Long Range Fuel Tank. Designed and manufactured in Australia, this premium exhaust system improves exhaust flow, enhances towing performance and delivers a deep, refined exhaust note while remaining compatible with factory Diesel Particulate Filter (DPF) systems. Featuring a 3" twin into 4" single DPF-back configuration, this performance exhaust is manufactured from premium 304-grade stainless steel with fully mandrel-bent tubing for unrestricted exhaust flow. The system comes standard with a high-flow resonator, providing a balanced exhaust note with improved sound compared to the factory system while maintaining everyday driving comfort. Engineered for Performance TORQIT Performance Exhausts are designed to maximise exhaust flow, reduce back pressure and improve overall engine efficiency. By allowing the engine to breathe more effectively, the system supports improved throttle response, towing performance and lower Exhaust Gas Temperatures (EGTs), making it ideal for touring, towing and demanding off-road conditions. Specifically designed to suit vehicles fitted with an ARB Frontier Tank, this exhaust provides reliable fitment without compromising durability or performance. Premium Construction Premium 304-grade stainless steel construction Fully mandrel bent tubing for unrestricted exhaust flow Heavy-duty laser-cut stainless steel flanges Internal and external TIG welded joins Heavy-duty mounting brackets High-flow resonator for improved sound quality Designed specifically for DPF-equipped vehicles Built to suit ARB Frontier Long Range Fuel Tank installations Performance Benefits Improved exhaust flow and engine efficiency Reduced exhaust gas temperatures (EGTs) Enhanced towing capability Improved throttle response Deep, refined exhaust note Excellent corrosion resistance Designed for Australian touring and off-road conditions Bolt-Together Installation The HS8138XMSS-4 is supplied as a complete bolt-together exhaust system for straightforward installation. It can be fitted by experienced DIY installers using basic workshop tools or professionally installed by an authorised TORQIT dealer. Installation time typically ranges from 1–3 hours depending on vehicle setup and workshop equipment. Vehicle Compatibility Toyota LandCruiser 200 Series 4.5L V8 Turbo Diesel October 2015 – 2022 DPF-equipped models Suits vehicles fitted with an ARB Frontier Long Range Fuel Tank Key Features DPF Back 3" Twin to 4" Single Performance Exhaust High-flow resonator included Premium 304-grade stainless steel Mandrel bent construction Laser-cut TIG welded flanges Heavy-duty brackets Bolt-together installation Australian designed and manufactured Built for towing, touring and off-road performance Important Information This exhaust system is specifically designed to suit Toyota LandCruiser 200 Series vehicles fitted with an ARB Frontier Long Range Fuel Tank. Please confirm vehicle compatibility before ordering, particularly if your vehicle has additional aftermarket accessories or modifications. This is a manufactured product. While key components may be held in stock, final assembly is completed to order and may require additional processing time before dispatch. SKU: HS8138XMSS-4 Material: Premium 304 Grade Stainless Steel Configuration: DPF Back – Twin 3" to Single 4" Finish: Brushed Stainless Steel Weight: 32kg