Drawer Systems

Suits Toyota Landcruiser 200 Series GXL/VX/Sahara Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA 4x4 Ford Ranger PY Double Storage Drawer System- 41013 SUITS: Ford Ranger PY Ford Ranger PY FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1365mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1250mm Internal drawer width = 453mm  

This smart, asymmetrical storage solution enables your vehicle to house the four included Wolf Pack Pro boxes. It takes only minutes to install, and then you can slide the Wolf Pack Pro boxes into place. This is a spring-loaded system so the boxes won’t vibrate or move excessively. The clean Bamboo deck can hold a max weight of 80 kg and is the perfect place for your fridge and slide. This storage system includes 1 storage unit, top deck, 4 Wolf Pack Pros, brackets, all necessary installation hardware and detailed fitment instructions. Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes. These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying. Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage. This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides. The top deck is finished with a clean Bamboo wood finish.Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy. This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover. All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.   Note: Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.   Consists of:1 x Storage Unit2 x Top Decks4 x Wolf Pack ProInstallation HardwareFitting Instructions Materials used:Black powder coated mild steel - FrameBamboo - Top Drawer Base Product Dimensions:975mm (38.4") L x 975mm (38.4") W x 315mm (12.4") H Wolf Pack Pro Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H Weight:50.6kg (111.6lbs) Special Note:80kg (176.4lbs) top deck load capacity

If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This 6 Cub Box Drawer with Cargo Sliding Top kit includes both a sliding drawer, sliding deck, 2 rotating latch mechanisms and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear spread across the surface. Fitted with a latching mechanism, both drawer and slide are kept in place when in the closed position. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck slide using STRA034 or other straps as well as RAIL007 and RRAC012. The deck is finished with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo, while insulating against noise and vibration. Finished with the same durable black powder coating as the Front Runner Slimline II Roof Rack The Front Runner 6 Cub Box Drawer with Cargo Sliding Top can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty. Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase. *Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016. Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - FrameNylon Carpet & Laminated Plywood - Top Drawer BaseProduct Dimensions:969mm (38.1") L x 940mm (37") W x 350mm (13.8") HInterior Drawer Dimensions:Full Size:944mm (37.2") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Bottom Drawer Sections:944mm (37.2") L x 440mm (17.3") W x 45mm (1.8") HTop Drawer:948mm (37.3") L x 893mm (35.2") W x 71mm (2.8") HWeight:68.04kg (150lbs)Load Rating:113kg (250lbs) Interior Drawers113kg (250lbs) Top DrawerSpecial Notes:The drawer unit has rotating latches to secure both the top and bottom drawers in place.

Suits Nissan Patrol Y62 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA LANDCRUISER 76 SERIES LEFT STORAGE DRAWER SYSTEM-E930A-LC76-LEFT-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 433mm  

MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA PATROL Y62 LEFT STORAGE DRAWER SYSTEM-41008 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

MSA 4X4 LANDCRUISER 100 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC100-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA EVEREST LEFT STORAGE DRAWER SYSTEM-E930-EVERES-LEFT-COM SUITS Ford Everest 7 Seat Model, No removable wing/face panels Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes floor extension) Left Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

MSA 4X4 LANDCRUISER 200 SERIES DOUBLE STORAGE DRAWER SYSTEM-E1030-LC200-COM Designed from the ground up, the way a quality 4WD storage system should be. SUITS Toyota Landcruiser 200 Series GXL/VX/Sahara Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA 4X4 PRADO 150 SERIES DOUBLE STORAGE DRAWER SYSTEM-E930-PRA150-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit(includes floor extension) Left Wing Kit Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Double Drawer Joining Bolts Double Width Trim Double Drawer Joining Wire EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 945mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 830mm Internal drawer width = 453mm  

LandCruiser 300 Series Left Storage Drawer PRODUCT CODE: 41011 VEHICLE DATE: 07/2021-CurrentPRODUCT TYPE: Single Storage Drawer System SUITS: Toyota Landcruiser 300 Series GXL/VX/SaharaToyota Landcruiser FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Left Drawer Module Left Fit Kit (includes base frame) Left Wing Kit Single Width Trim   EXTERNAL DIMENSIONS +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 510mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 433mm

If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider these “universal” drawers. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.Includes turnbuckles and carabiners to facilitate installation to many vehicle factory mounting points. 180kg / 397lb drawer load carrying capacity. Hold open feature: drawer “locks” open while parked on uneven surfaces. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear. The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchit or other straps. The deck above the drawers can also be used to mount Front Runner Fridge/Cargo Slides. To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. All Front Runner Storage Systems are backed by a 2 year warranty. NOTE: These "universal” drawers do not come with a vehicle specific deck completion set or faceplates.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.*Please Note: Cub Packs and Flat Packs are not included when purchasing this Drawer System and are sold separately.   Consists of:1 x Medium Pick Up Drawer unit1 x Push to close latch with 2 keys3 x Accessory Channels6 x Eye Nuts for Accessory ChannelsInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel - Drawer BinCarpet & Laminated plywood - Top DeckProduct Dimensions:Overall Dimensions:1170mm (46.1") L x 860mm (33.9") W x 295mm (11.6") HInternal Dimensions:1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") HOpen Dimensions:2100mm (82.7") L x 860mm (33.9") W x 295mm (11.6") HWeight:67.8kg (149.5lbs)Load Rating:180kg (137lbs)

Storing, organizing, and moving gear in the Toyota Prado/Lexus GX 470 just got easier. This Cub Pack based lockable drawer system provides a comprehensive and practical storage solution for easily transporting stored items between a vehicle and the campsite, garage, store, etc. Designed specifically to fit the contours of the Toyota Prado/Lexus GX470. Engineered tough for both on and off-road conditions. This removable box drawer kit includes 1 drawer slides, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.These stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. 113kg / 250 lb per drawer load carrying capacity. Hold open feature: drawers\ “lock” open while parked on uneven surfaces. High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear. The flat deck incorporates three cargo attachment channels and 6 Black Tie Down Rings / Eye Nuts. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminium boxes and other storage containers to the top deck using Stratchits. The deck above the drawer can also be used to mount Front Runner Cargo/Fridge Slides. The left and right-side Faceplates have 4, pre-cut, knock-outs each for adding electrical panel socket inserts (sold separately). The side decks are easily removable creating storage pockets between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, snorkels, masks, fins, kindling, barbeque skewers, etc. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as the Front Runner Slimline Rack and other Front Runner products. This Front Runner Removable Box Drawer Kit can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy. This storage system is designed for interior use.   All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase. Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys1 x Deck Completion Set3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top and Side DecksProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 1425mm (56.1") W x 338mm (13.3") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:72.1kgLoad Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.

Make storing and organizing gear and valuables a no-brainer. This lockable drawer with fitted decks and faceplates have been designed specifically for the Toyota Land Cruiser 79 DC. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle.Engineered tough for both on and off-road travel. This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions. 180kg / 397lb drawer load carrying capacity. Hold open feature: drawer "locks" open while parked on uneven surfaces. High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base. Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear. The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides. A fridge (footprint of 750mm x 425mm or smaller) can be installed on the left hand side of the drawer for access through a gullwing style window. The right rear deck and back right side deck each have a cut out (215mm in diameter) to fit and secure a gas/propane bottle or similar shaped object. The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc. To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle. The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicle’s interior contours. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. This drawer kit can be easily installed in minutes by securing the drawers via 3 channels and supplied hardware. Drilling is required to fit the 3 securing channels into the Toyota Land Cruiser 79 load bed.   All Front Runner Storage Systems are backed by a 2 year warranty.*Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner.   Consists of:1 x Front Runner Drawer unit (SSDR012)1 x Toyota Land Cruiser 79 DC Drawer Deck Completion Set (SSDS107)1 x Wing Set (SSWS004)1 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory ChannelsInstallation HardwareFitting InstructionsMaterials used:Aluminum - Accessory ChannelsBlack powder coated steel - Drawer Bins, Frame & Mounting ChannelsCarpeted & Laminated plywood - Top Deck & Deck SetsProduct Dimensions:Overall Closed Dimensions:1510mm (59.5") L x 1574mm (62") W x 335mm (13.2") HDrawer Internal Dimensions:1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") HWeight:80.5kg (177.5lbs)Load Rating:180kg (397lbs)

Make storing and organizing gear and valuables a no-brainer. This lockable drawer, with fitted decks and faceplates, has been designed specifically for the Toyota Land Cruiser 79 DC. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle.Engineered tough for both on and off-road travel. This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie-down rails, 6 tie-down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions. 180kg / 397lb drawer load carrying capacity. Hold open feature: drawer "locks" open while parked on uneven surfaces. High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base. Provide peace of mind and security by locking away important travel items such as computers, smartphones, and camera gear. The flat deck incorporates three cargo attachment channels and 6 Black {SSCA047~showName). Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides. The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc. To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle. The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicle’s interior contours. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. This drawer kit can be easily installed in minutes by securing the drawers via 3 channels and supplied hardware. Drilling is required to fit the 3 securing channels into the Toyota Land Cruiser 79 load bed. All Front Runner Storage Systems are backed by a 2 year warranty. *Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner. Consists of:1 x Front Runner Drawer unit (SSDR012)1 x Toyota Land Cruiser 79 DC Drawer Deck Completion Set (SSDS120)1 x Custom Wing Set1 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory ChannelsInstallation HardwareFitting InstructionsMaterials used:Aluminum - Accessory ChannelsBlack powder coated steel - Drawer Bins, Frame & Mounting ChannelsCarpeted & Laminated plywood - Top Deck & Deck SetsProduct Dimensions:Overall Closed Dimensions:1510mm (59.5") L x 1575mm (62") W x 295mm (11.6") HDrawer Internal Dimensions:1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") HOpen Dimensions:2100mm (82.7") L x 860mm (33.9") W x 295mm (11.6") HWeight:89.3kg (196.9lbs)Load Rating:180kg (396.8lbs)

Front Runner Fridge Slide 80L–90L The Front Runner Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide convenient access to portable fridges, camping equipment, storage boxes, and touring gear. Ideal for 4WDs, canopies, caravans, ute trays, and drawer systems, this low-profile slide maximises accessibility while minimising the space required within your vehicle. Featuring high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, making it easy to access your fridge and equipment without climbing into the vehicle. The rattle-free design and secure swivel latch locking mechanism help keep your cargo stable and secure during travel. Constructed from durable black powder-coated steel and supplied with mounting hardware for wood and metal surfaces, this fridge slide is built to withstand demanding touring, camping, overlanding, and worksite conditions. Features Suitable for 80L–90L portable fridges Heavy-duty 100kg load capacity High-strength bearing drawer slide system Nearly 100% tray extension for easy access Low-profile design maximises storage space Rattle-free operation during travel Secure swivel latch locking system Mounts to most flat surfaces Compatible with Front Runner drawer systems Pre-drilled mounting holes for easy installation Includes mounting hardware for wood and metal surfaces Durable black powder-coated steel construction Specifications Overall / Closed Dimensions: 920mm x 580mm x 65mm Open Dimensions: 1830mm x 580mm x 65mm Internal Dimensions: 880mm x 508mm x 25mm Weight: 16.7kg Maximum Load Capacity: 100kg Material: 1.8mm Black Powder-Coated Steel What's Included 1 x Front Runner Fridge Slide 1 x L-Bracket Latch Bolt Kit Frequently Asked Questions What fridge sizes are suitable for this Front Runner Fridge Slide? This slide is designed to suit many popular portable fridges in the 80L–90L range. Always compare your fridge dimensions with the tray measurements before purchasing. Can this fridge slide be mounted in a canopy, caravan, or ute tray? Yes. The slide can be mounted to most suitable flat surfaces, including canopies, caravans, ute trays, drawer systems, and touring vehicle storage setups. Does the slide lock securely during travel? Yes. The integrated swivel latch locking system and rattle-free design help keep your fridge and equipment secure while travelling on-road and off-road. Note: Fridges and storage containers shown are sold separately.

Front Runner Cargo Slide / Fridge Slide 80L–90L The Front Runner Cargo Slide / Fridge Slide 80L–90L is a heavy-duty storage solution designed to provide quick and convenient access to larger portable fridges, camping equipment, toolboxes, and adventure gear. Ideal for 4WDs, canopies, ute trays, drawer systems, and touring vehicles, the slide maximises accessibility while maintaining a compact footprint. Built with high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, allowing easy access to equipment without climbing into your vehicle. The rattle-free design keeps your cargo secure during travel, while the clip latch locking system prevents unwanted movement when closed. Constructed from durable black powder-coated steel and featuring a hold-open mechanism for uneven terrain, the Front Runner Cargo Slide is engineered for demanding off-road, touring, camping, and worksite environments. Features Suitable for 80L–90L portable fridges High-strength bearing drawer slide mechanism Nearly 100% tray extension for easy access Rattle-free design during travel Clip latch locking system Hold-open mechanism for uneven surfaces Mounts to most flat surfaces Compatible with Front Runner Drawer Systems Pre-drilled mounting holes for simple installation Includes mounting hardware for wood and metal surfaces Heavy-duty black powder-coated steel construction Ideal for fridges, storage boxes, tools, and touring equipment Specifications Overall / Closed Dimensions: 942mm x 578mm x 85mm Open Dimensions: 1858mm x 578mm x 85mm Internal Dimensions: 884mm x 507mm x 64mm Weight: 18.2kg Load Rating: 113kg (250lbs) Material: Black Powder-Coated Steel What's Included 1 x Front Runner Cargo Slide Installation Hardware Fitting Instructions Frequently Asked Questions What fridge sizes will fit this Front Runner Cargo Slide? This model is designed for many popular portable fridges in the 80L–90L range. We recommend comparing your fridge dimensions with the tray measurements before purchasing. Can this Cargo Slide be installed in a canopy, ute tray, or drawer system? Yes. The slide can be mounted to most suitable flat surfaces, including canopies, ute trays, drawer systems, and touring vehicle storage setups. Does the slide lock securely during travel? Yes. The integrated clip latch locking system and rattle-free design help keep your fridge and equipment secure while driving on-road and off-road. Note: Fridges, storage containers, and accessories shown are sold separately.

Front Runner Cargo Slide / Fridge Slide 40L–52L The Front Runner Cargo Slide / Fridge Slide 40L–52L (FSLI002) is a practical and heavy-duty storage solution designed to make accessing portable fridges, toolboxes, storage containers, and touring equipment quick and effortless. Built for 4WDs, ute trays, canopies, drawer systems, and commercial vehicles, this slide maximises accessibility while using minimal storage space. Featuring high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, allowing easy access to your fridge or equipment without climbing into your vehicle. The unique rattle-free design keeps the slide secure while travelling, while the integrated clip latch locks the tray firmly in the closed position for added safety. Constructed from durable black powder-coated steel and supplied with mounting hardware for both wood and metal surfaces, the Front Runner Cargo Slide is engineered to withstand demanding touring, off-road, and worksite conditions. Features Suitable for 40L–52L portable fridges High-strength bearing drawer slide system Nearly 100% tray extension for easy access Rattle-free design during travel Secure clip latch locking system Hold-open mechanism for uneven terrain Mounts to most flat surfaces Compatible with Front Runner Drawer Systems Pre-drilled mounting holes for easy installation Includes mounting hardware for wood and metal surfaces Heavy-duty black powder-coated steel construction Suitable for fridges, tools, storage boxes, and adventure gear Specifications Product Code: FSLI002 Overall Dimensions: 793mm L x 535mm W x 85mm H Closed Dimensions: 793mm L x 533mm W x 85mm H Open Dimensions: 1529mm L x 533mm W x 85mm H Internal Dimensions: 735mm L x 460mm W x 64mm H Weight: 16.4kg Load Rating: 113kg Material: Black Powder-Coated Mild Steel What's Included 1 x Front Runner Cargo Slide Installation Hardware Fitting Instructions Frequently Asked Questions What fridge sizes will fit the Front Runner FSLI002 Cargo Slide? The FSLI002 is designed to suit many popular portable fridges in the 40L–52L range. Always verify your fridge dimensions against the tray measurements before purchasing. Can the Cargo Slide be installed in a canopy, ute tray, or drawer system? Yes. The slide is designed to mount to most suitable flat surfaces, including canopies, ute trays, Front Runner Drawer Systems, and touring vehicle storage systems. Does the slide stay open on uneven ground? Yes. The built-in hold-open mechanism helps prevent the slide from closing unexpectedly when your vehicle is parked on uneven terrain.