This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Hummer H3 contains Slimline II Tray, Wind Deflector, 2 Tracks, 12 Large Stud Plates and 6 Feet. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRHU001T - Hummer H3 Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FASS011 - Stud Plate Kit / Large Set of 12 - by Front Runner 3 x FASS012 - Foot Set / 40mm-50mm - by Front Runner 1 x RRSTG08 - Slimline II Tray - 1345mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 27.5kg (60.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18.0") Length: 1615mm (64.0") Height: 140mm (6.0") Shipping Weight: 31.9kg (70.0lbs)

This 1560mm/61.4" long full-size Slimline II cargo carrying roof rack kit for the Hummer H3 contains Slimline II Tray, Wind Deflector, 2 Tracks, 12 Large Stud Plates and 6 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRHUT01T - Hummer H3 Slimline II Roof Rack Kit / Tall - by Front Runner Consisting of: 1 x FASS011 - Stud Plate Kit / Large Set of 12 - by Front Runner 3 x FASS013 - Foot Set / 60mm-70mm - by Front Runner 1 x RRSTG08 - Slimline II Tray - 1345mm(W) X 1560mm(L) - by Front Runner Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.0kg (61.7lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18.0") Length: 1615mm (64.0") Height: 140mm (6.0") Shipping Weight: 32.3kg (71.0lbs)

Upgrade your Grenadier adventure by fitting this strong 4-step ladder. Roof racks are for jerry cans, recovery tracks, storage boxes, bicycles, kayaks, and a roof top tent, all of which can be easily accessed with the Ineos Grenadier Ladder.   This ladder mounts to the vehicle's OEM Mounting points on the rear door.  The ladder mimics the rugged exterior of the vehicle and is made with off-road tough black powder-coated high-strength steel for maximum durability and strength. The ladder has 4 steps. Length from the bottom step to the top step is 1147.59mm / 45.18". This ladder has a maximum load rating of 110kg /242.5lbs. Fitment guide and installation hardware included. Consists of:1 x Ineos Grenadier LadderInstallation GuideFitting Instructions Materials used:Black powder-coated high strength steelBlack powder-coated aluminiumHigh-density polyethylene Product Dimensions:1157mm (45.6") L x 208mm (8.2") W x 245mm (9.6") H Weight:4.62kg (10.2lbs) Load Rating:110kg (242lbs)

Get your Ineos Grenadier Quartermaster Double Cab ready for every type of cargo-carrying duty imaginable with the tough Slimline II Load Bed Rack Kit, when fitted with a Roller Tonneau Cover. Did you know there are 55+ accessories for this modular rack? This kit creates a full size rack that sits above your Ineos Grenadier Quartermaster truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 feet that fit into the existing tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRIG005T - Ineos Grenadier Quartermaster (2023-Current) Roller Tonneau Cover Slimline II Load Bed Rack Kit Consisting of: 3x FASS016 - Flat Feet (pair) / 65mm 1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 25.34kg (55.87lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 255mm (10") Shipping Weight: Weight: 30kg (66lbs)

Turn your Ineos Grenadier Quartermaster Double Cab into the ultimate gear with this tough Slimline II Roof Rack kit. Now it can go anywhere while carrying a decent load of camping or sports gear on the roof rack at the same time. This 954mm/37.6" long, 1/2 size, Slimline II cargo carrying roof rack kit for your Ineos Grenadier Quartermaster contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.Installs easily with no drilling required. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRIG004T - Ineos Grenadier Quartermaster (2023-Current) Slimline II 1/2 Roof Rack Kit Consisting of: 3x LASS040 - Leg Spacer 10mm (Pair) 3x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair) 1x RRSTP05 - SLII Tray - 1575mm(W)X954mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 24.82kg (54.72lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 295mm (12") Shipping Weight: Weight: 30kg (66lbs)

To turn your Ineos Grenadier Quartermaster Double Cab into even more of a gear-carrying utility vehicle, it needs this tough full-size Slimline II Roof Rack kit. Then it can go anywhere with the necessary camping, overland or sports gear on the roof rack. This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for your Ineos Grenadier Quartermaster contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle.All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. Installs easily with no drilling required. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRIG003T - Ineos Grenadier Quartermaster (2023-Current) Slimline II Roof Rack Kit Consisting of: 4x LASS040 - Leg Spacer 10mm (Pair) 4x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair) 1x RRSTP08 - SLII Tray - 1575mm(W)X1560mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 34.98kg (77.12lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 295mm (12") Shipping Weight: Weight: 40kg (88lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the International Scout II contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRIS001T - International Scout II (1971-1980) Slimline II Roof Rack Kit - by Front Runner Consisting of: 4 x LASS027 - Leg Spacer 6mm (Pair) - by Front Runner 4 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner 1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 34kg (75lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 255mm (10") Shipping Weight: Weight 39.8kg (87.5lbs)

This kit creates a full-size rack that sits above your Isuzu D-Max's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT038T - Isuzu D-Max (2012-Current) EGR RollTrac Slimline II Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount 1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 30.46kg (67.15lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 240mm (9") Shipping Weight: Weight: 31kg (68lbs)

This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Isuzu D-Max. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Features KRID013T - Isuzu D-Max (2020-Current) Slimline II Roof Rail Rack Kit / Low Profile - by Front Runner Consisting of: 1x FAIK003 - Isuzu D-Max (2020-Curr) Foot Rails / Low Profile 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) 1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.42kg (62.66lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 260mm (10") Shipping Weight: Weight: 30kg (66lbs)

Get ready to see the light when you fit the Slimsport Rack 40" Light Bar Wind Fairing to your Isuzu D-Max pick up. The Wind Fairing helps the air to flow up and over your rack and accessories. It also reduces rack noise and improves aerodynamics and fuel consumption; it has been designed to work in conjunction with a 40" Light Bar (not included). Lightbar wind fairing for Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Features Consists of: 1 x Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing 1 x Fitting Instructions Installation Hardware Materials used: Black power coated steel Product Dimensions: 1135mm (44.7") L x 143mm (5.6") W x 115mm (4.5") H Weight: 2kg (4.4lbs)

Turn your reliable Isuzu into a gear carrier of note with this low-profile Slimsport Rack. The rack is extremely quiet, thanks to the included wind fairing. You can fit our wide range of accessories to the top of the rack. This low profile flat deck Slimsport rack has a load-carrying area of 1415mm (55.7") x 1141mm (44.9"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories. The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: No drilling required All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSID003T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit Consisting of: 1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray 1x RRAC310 - Isuzu Dmax (2020-Current) Slimsport Rack Wind Fair Material Used: Black epoxy powder - coated T6 aluminium High strength steel Assembled Rack Kit Dimensions: 1415mm (55.7") L x 1141mm (45") W x 121mm (4.8") H  Approximate Installed Weight: 19.68kg (43.39lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 325mm (13") Length: 1700mm (67") Height: 220mm (9") Shipping Weight: Weight: 27kg (59lbs)

Get much more out of the Slimsport Roof Rack on your Isuzu D-Max with this super useful Wind Fairing. It reduces fuel consumption, noise and drag while pushing the air up and over the rack and gear. A wind fairing for the Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Features Consists of: 1 X Wind Fairing 1 X Wind Fairing Mid Support 2 X Wind Fairing Side Support Brackets (Left & Right Hand side) 2 X Light Bar Bracket High Profile (Left & Right Hand side) 2 X Light Bar Bracket Low Profile (Left & Right Hand side) Installation Hardware Fitment Guide Materials used: Black powder-coating high strength steel Product Dimensions: 166mm (6.5") L x 1148mm (45.2") W x 160mm (6.3") H Weight: 2.77Kg (6.1lbs)

Gear up your Isuzu D-MAX RG 3rd Gen Extended Cab for any adventure and hauling cargo with the Slimline II Roof Rack. This versatile, off-road tough roof rack is compatible with a wide range of accessories, allowing you to customize it to suit your lifestyle, adventures, and cargo-hauling needs. This particular roof rack kit features Low Profile Foot Rails to help minimize drag and reduce noise when carrying loads of all kinds. This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and two (2) Low Profile Foot Rails to mount the Slimline II Tray to your Isuzu D-MAX RG 3rd Gen Extended Cab. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab. Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets. Features KRID014T - Isuzu D-MAX RG 3rd Gen Extended Cab (2020-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner Consisting of: 1x FAIK004 - Isuzu D-MAX RG 3rd Gen Ex Cab (2020-Current) Foot Rails 1x RRSTA05 - SLII Tray - 1165mm(W)X954mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 19.36kg (42.68lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 260mm (10") Shipping Weight: Weight: 19.36kg (43lbs)

This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu D-Max. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access Front Runner under rack mount table (1 smaller prep or 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRID011T - Isuzu D-MAX RG/3rd Gen (2020-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAIK002 - Isuzu D-Max/Mazda BT 50 (2020-Current) Foot Rails 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.67kg (63.21lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 260mm (10") Shipping Weight: Weight: 27.57kg (61lbs)

This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu Double Cab. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: This Rack Kit is not suitable for 2019 - current RG01 and SX Models. Features KRID008T - Isuzu D-Max RT50/85/2nd Gen DC (2011-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAIK001 - Isuzu D-Max RT50/85 2nd Gen (2011-Current) Foot Rails 1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.16kg (62.08lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 140mm (6") Shipping Weight: Weight: 28.45kg (63lbs)

This kit creates a full size rack that sits above your Isuzu D-Max X-Terrain's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1156mm) and 4 feet that fit into the existing tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRID010T - Isuzu D-Max X-Terrain (2020-Current) Roll Top Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2x FASS016 - Flat Feet (pair) / 65mm2x RRAC962 - Track Mount Stud Plate1x RRSTG06 - SLII Tray - 1345mm(W)X1156mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 23.43kg (51.65lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 240mm (9")   Shipping Weight: Weight: 24kg (53lbs)

This kit creates a full-size rack that sits above your Isuzu DMax X-Terrain's truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1255mm x 1358mm) and 6 Pickup Roll Top/Top Mount Legs that fit into the existing Tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRID015T - Isuzu DMax X-Terrain (2020-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount3x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 25.28kg (55.73lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 255mm (10")   Shipping Weight: Weight: 29kg (64lbs)

This 1964mm/77.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Isuzu MU-X. Easily installs using the existing factory mounting points. No drilling required.Note: This Rack Kit is only suitable for vehicles that are equipped with existing roof rails. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack (such as Front Runner tables). These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRIM001T - Isuzu MU-X (2017-2020) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAIM001 - Isuzu MU-X Foot Rails - by Front Runner 1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 34kg (74lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1610mm (63") Height 240mm (9") Shipping Weight: Weight 39.3kg (86.5lbs)

This 1964mm/77.3" long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray to your 2021-Current Isuzu MU-X. Easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables. Openings on the Foot Rails allows access to Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a limited lifetime warranty.* Features KRIM002T - Isuzu MU-X (2021-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAIM002 - Isuzu MU-X (2021 - Current) Foot Rails 1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 37.73kg (83.18lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 260mm (10") Shipping Weight: Weight: 39kg (86lbs)

Consists of:1 x Rubber Sleeve Materials used: Cold cure elastomer polymer plastic Product Dimensions:190mm (7.5) L x 155mm (6.1) W x 45mm (1.8) HWeight:0.13kg (0.3lbs)

A set of plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 4 Piece (TBMK012). These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes. The Quick Release Tent Mount Kit / 4 Piece (TBMK012) gives you the freedom to mount or remove the tent in seconds, and with no tools. Note: Only compatible with TBMK012. For use with TBMK019 , TBMK020 and TBMK021 please use TBMK031 and TBMK032 Features Consists of: 1 x Set of Nut Plates Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 85mm (3.3") L x 23.5mm (0.9") W x 5mm (0.2") H (Single Nut Plate) Weight: 0.35kg (0.77lbs)

A set of 4 plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 4 Piece. These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes. The Quick Release Tent Mount Kit / 4 Piece gives you the freedom to mount or remove the tent in seconds, and with no tools. NOTE: Please refer to the channel plate dimensions to ensure correct selection and fitment. Features Consists of: 2 x pair of Nut Plates Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 85mm (3.4") L x 22.5mm (0.9") W x 4mm (0.16") H (Single Nut Plate) Weight: 0.7kg (1.5lbs)

A set of 6 plates that allow you to mount your Tuffstuff Alpha, Tuffstuff Alpha2 & James Baroud tent to a Front Runner Rack using the Quick Release Tent Mount Kit / 6 Piece. These black powder coated plates slide into the tent extrusion and bolt onto the latch bracket and self-aligning bushes. The Quick Release Tent Mount Kit / 6 Piece gives you the freedom to mount or remove the tent in seconds, and with no tools. NOTE: Please refer to the channel plate dimensions to ensure correct selection and fitment. Features Consists of: 3 x pair of Nut Plates Fitting Instructions Materials used: Black powder coated steel Product Dimensions: 85mm (3.4") L x 22.5mm (0.9") W x 4mm (0.16") H (Single Nut Plate) Weight: 1.05kg (2.3lbs)

A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters. You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars. Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred. The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs. Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack. Made from stainless steel and a durable, weather resistant black powder-coated aluminum. Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. Features KRJC006 - Jeep Cherokee Sport Load Bar Kit / Gutter Mount - by Front Runner Consisting of: 2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner 1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner 1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner Material used:   Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 7kg (16lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 120mm (5") Length 1445mm (57") Height 175mm (7") Shipping Weight: Weight 8.2kg (18.1lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRJC002L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit - by Front Runner Consisting of: 2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner 1 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner 1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight 30kg (67lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 35.2kg (77.5lbs)

This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall Consisting of: 1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 30.65kg (67.57lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 35.26kg (78lbs)

This kit creates a full-size rack that sits above your Jeep Gladiator's truck bed with a Fold-Top cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 6 Pickup Roll Top/Top Mount Legs that fit into the Tracks. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Drilling may be required to mount the track to the bed of your truck. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRJG013T - Jeep Gladiator (2019-Current) Fold-Top Slimline II Bed Rack Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRAC002 - Universal Track / 1400mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 32.95kg (72.64lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17"); Length: 1730mm (68"); Height: 280mm (11")   Shipping Weight: Weight: 34kg (75lbs)

Up your Jeep Gladiator's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the load bed of your Jeep. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind. This Pro Bed Rack Kit is specifically designed to fit the Jeep Gladiator load bed. Included in this Kit is the a 1225mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System. The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration. The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.  The Pro Bed System secures Pro Bed accessories,Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and the bed of your truck. Secures to the bed of the Jeep Gladiator with specific mounting brackets bolted to the existing factory mounting points.   The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features PBJG001T - Jeep Gladiator (2019-Current) Pro Bed Rack Kit Consisting of: 3x FASS025 - Foot Set / 70mm - 80mm 1x PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System 3x RRAC921 - Canopy Rack Kit Installation Set 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 101.86kg (224.56lbs) Shipping Dimensions: Width: 645mm (25") Length: 1720mm (68") Height: 510mm (20") Shipping Weight: Weight: 112kg (246lbs)

This tough, lightweight steel and aluminum system secures to the load bed of your Jeep Gladiator, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit several accessories to its sides or even a Front Runner rack. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system you can take along all the gear you need for any adventure. This Pro Bed System is specifically designed to fit the Jeep Gladiator load bed. The Pro Bed System provides the frame to customize your Load Bed storage configuration. Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket or Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the bed of your truck. Secures to the load bed of the Jeep Gladiator with specific mounting brackets bolted to the existing factory mounting points. Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks. The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net. Features PBJG001S - Jeep Gladiator (2019-Current) Pro Bed System Consisting of: 1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium 1x PBJG001 - Pro Bed Rack Jeep Gladiator mount bracket 2x PBRA001 - Pro Bed Rack Universal Structural Components Material Used: Black epoxy powder - coated T6 aluminium Approximate Installed Weight: 81.09kg (178.77lbs) Shipping Dimensions: Width: 670mm (26") Length: 1275mm (50") Height: 345mm (14") Shipping Weight: Weight: 83kg (183lbs)

A set of Pickup Bed Load Bars used to transport gear over the bed of your Jeep Gladiator when fitted with an EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1345mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions. The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks. Allows for gear to be mounted above the pickups load bed. The load bed retains its load-carrying ability, while the drop-down door functions as usual. Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks. The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. Made from stainless steel and a durable, weather-resistant black powder coated aluminum. Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT012 - Jeep Gladiator (2020-Current) EGR RollTrac Load Bed Load Bar Kit - by Front Runner Consisting of: 2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK015 - Roof Load Bar Pair 1345mm(W)   Material used: Black epoxy powder - coated T6 aluminium   Approximate Installed Weight: 7.66kg (16.89lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 160mm (6"); Length: 1460mm (57"); Height: 165mm (6")   Shipping Weight: Weight: 8.2kg (18lbs)

This kit creates a full-size rack that sits above your Jeep Gladiator's load bed when fitted with an EGR RollTrac cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing EGR RollTrac channels. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation. Features KRRT044T - Jeep Gladiator (2020-Current) EGR RollTrac Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 3x LASS028 - Pick-Up Roll Top Leg Mount 1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.55kg (62.94lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 240mm (9") Shipping Weight: Weight: 28.8kg (63lbs)

This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Please see the fitment instructions in the INSTALL tab for further installation information. Features KRJG010T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit - by Front Runner Consisting of: 1x FAJL004 - Jeep Wrangler JL (2018-Curr) Front Bar RR Mount 1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini 1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 29.94kg (66.01lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 530mm (21") Length: 1730mm (68") Height: 380mm (15") Shipping Weight: Weight: 31kg (68lbs)

This 954mm/37.6" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and the Jeep Extreme Mounting System to mount the Slimline II Tray to your Jeep Gladiator JT. Drilling is required for installation. All Front Runner Rack Kits contain installation instructions and all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Please see the fitment instructions in the INSTALL tab for further installation information. *Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide. Note: This is not suitable for the Mojave Edition of the Jeep Gladiator. Features KRJG016T - Jeep Gladiator JT (2019-Current) Cab Over Camper Slimline II Roof Rack Kit Consisting of: 1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount 1x FAJT003 - Jeep Gladiator JT (2019-Current) Foot Rail/Mini 1x RRSTJ05 - SLII Tray - 1425mm(W)X954mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 22.24kg (49.03lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 325mm (13") Shipping Weight: Weight: 31kg (68lbs)

This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep Gladiator JT including the Slimline II Tray (1425mm x 1560mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation. This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* The Jeep Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hardtop itself. *Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide. Note: This is not suitable for the Mojave Edition of the Jeep Gladiator. Features KRJG014T - Jeep Gladiator JT (2019-Current) Extreme Slimline II Roof Rack Kit Consisting of: 1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount 1x FAJT001 - Jeep Gladiatorr JT (2019-Curr) Foot Rails 1x FAJT002 - Jeep Gladiator (2019-Curr) Inner Brackets 1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 32.22kg (71.03lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 315mm (12") Shipping Weight: Weight: 41kg (90lbs)

If you dont currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This kit is designed to work with the existing Jeep Gladiator JT factory bed rails and comes with a pair of 1425mm wide Front Runner Load Bars, 2 pairs of Front Runner Tall Load Bed Legs, and all the necessary hardware required to mount to the factory bed rails. The Front Runner Load Bar Kit features 22mm thick HD aluminum extrusions (slats) that are used in the Slimline II Roof Rack, which means that these load bars can be used as slats in a similar width Slimline II Roof Rack. Additionally, the sliding nut t-slots on the slats allow for unlimited and ultra-secure mounting positions, and accessories and equipment can be quickly removed as well. Features KRJG003 - Jeep Gladiator JT (2019-Current) Load Bed Load Bar Kit Consisting of: 2x LASS026 - Universal Load Bed Leg / Tall (Pair)1x LBSK016 - Roof Load Bar Pair 1425mm(W)1x RRAC901 - Load Bed Nut Kit- Toyota Tacoma 2004+/Tundra 2007+   Material used: Black epoxy powder - coated T6 aluminium   Approximate Installed Weight: 7.57kg (16.69lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 200mm (8"); Length: 1530mm (60"); Height: 130mm (5")   Shipping Weight: Weight: 8kg (18lbs)

This kit creates a full-size rack that sits above your Jeep Gladiator JTs load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 4 Pickup Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRJG002T - Jeep Gladiator JT (2019-Current) Slimline II Load Bed Rack Kit - by Front Runner Consisting of: 2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner 1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner 1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 24kg (52lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18") Length 1610mm (63") Height 280mm (11") Shipping Weight: Weight 27.6kg (60.7lbs)

This 954mm/37.6" long, full-size, Slimline II cargo carrying roof rack kit for your Jeep Gladiator JT contains the Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRJG009T - Jeep Gladiator JT (2019-Current) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2x LASS027 - Leg Spacer 6mm (Pair) 3x LASS035 - Jeep JL/JT Mounting Leg / 130mm (Pair) 1x RRSTM05 - SLII Tray - 1475mm(W)X954mm(L) 1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 24.9kg (54.9lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1730mm (68") Height: 280mm (11") Shipping Weight: Weight: 25.4kg (56lbs)

This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Jeep Grand Cherokee WK2 contains the Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRJG011T - Jeep Grand Cherokee WK2 (2011-2021) Slimline II Roof Rack Kit - by Front Runner Consisting of: 2x FASS012 - Foot Set / 40mm - 50mm 1x FASS013 - Foot Set / 60mm - 70mm 1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L) 1x TRJG004 - Jeep Grand Cherokee WKII (2011-2020) Tracks/1450mm 1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 28.56kg (62.96lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1730mm (68") Height: 270mm (11") Shipping Weight: Weight: 29kg (64lbs)

This flat drawer can hold a refrigerator along with chairs, cargo boxes, and other gear. Or it can simply be used to easily access groceries and other everyday items. Secure up to a 52L (or equivalent) size fridge, with additional room for storage -- such as the Front Runner Wolf Packs or Cub Boxes, tents, chairs, camp kitchen items, tool kits, etc. Mounts to the existing tie down points in the bed of the JKU and does NOT REQUIRE DRILLING into your 2011 + Jeep Wrangler JKU. Push to close dual latching lock securely keeps the unit closed and rattle-free. Works with the factory Sub Woofer in place. When extended, 100% full access to the storage cubby. Features multiple tie down points for Stratchits or many other style straps. Load Rating: 113 kg / 250 lbs. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. The Front Runner JK Cargo Slide is the perfect companion to the Jeep Wrangler JKU 4-Door Cargo Storage Interior Rack. If you own a 2007 - 2010 JKU, installation of this product requires drilling 2 9mm holes into the body of your vehicle. See Installation Instructions for more details. This product was not designed for 2-Door JK models. All Front Runner Storage Systems are backed by a 2 year warranty. Features Consists of:   1 x Flat Roller Drawer 1 x Front Mounting Strap Installation Hardware Materials used: Black powder-coated mild steel Product Dimensions: 852mm (33.5") L x 898mm (35.4") W x 128mm (5") H Internal Tray Dimensions: 778mm (30.6") L x 780mm (30.7") W x 60mm (2.4") D Weight: 29kg (63.9lbs) Load Rating: 113 kg (250lbs)

This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JL 2 door including the Slimline II Tray (1425mm x 1762mm), the Jeep Extreme Mounting System and a Wind Deflector. Drilling is required for installation. This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hardtop roof on or with no roof at all. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* The Front Runner Jeep Extreme mounting system is secured to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hardtop or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight or stress on the hardtop itself. *Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide. Note: This is not suitable for the Mojave Edition of the Jeep Gladiator. Features KRJW035T - Jeep Wrangler JL 2 Door (2018-Current) Extreme Slimline II Roof Rack Kit Consisting of: 1x FAJL005 - Jeep Wrangler JL 2- Door (2018-Curr) Foot Rails 1x FAJL006 - Jeep Wrangler JL 2-Door (2018-Curr) Inner Brackets 1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount 1x RRSTG09 - SLII Tray - 1345mm(W)X1762mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 38.11kg (84.02lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17") Length: 1720mm (68") Height: 320mm (13") Shipping Weight: Weight: 47kg (103lbs)

Designed to carry a variety of hull shapes as well as SUPs. This is a J style Kayak foldable bracket. The cushioned padded bars protect the hull. Large contact surface area for extra stability when transporting your kayaks. Includes 2 x Tie Down Straps with protective buckle bumpers. Installation hardware supplied. Features Consists of: 2 x Foldable Kayak Carrier Brackets 2 x Tie Down Straps Installation Hardware Fitting Instructions Open Dimensions 795mm (31.3") L x 426mm (16.8") W x 462mm (18.1") H Closed Dimensions 472mm (18.6") L x 270mm (10.6") W x 102mm (4") H Weight 5.17kg (11.4lbs)

Designed to carry a variety of hull shapes as well as SUPs. Each bracket has an independent pivoting saddle with an angle-setting lever. The flexible cushioned pads protect the hull. Large contact surface area for extra stability when transporting your kayaks. Includes 2 x Tie Down Straps with protective buckle bumpers. Installation hardware supplied. Accommodates kayaks and SUPs up to 900mm/35.4" wide and 40kg/88.2 lbs. Features Consists of: 2 x Front Cradle Rests 2 x Rear Cradle Rests 2 x Straps Installation Hardware Fitting Instructions Product Dimensions: 200mm (7.9") L x 100mm (3.9") W x 200mm (7.9") H Weight: 3.1kg (6.8lbs) Load Rating: 40kg (88.2lbs)

This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Kia Sorento 2016+. It easily installs using the existing factory mounting points. No drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit). All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRKS002T - Kia Sorento (2016-2020) Slimline II Roof Rack Kit - by Front Runner Consisting of: 1 x FAKS002 - Kia Sorento (2016-Current) Foot Rails - by Front Runner 1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminium High strength steel Approximate Installed Weight: 32kg (71lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 450mm (18") Length 1615mm (64") Height 140mm (6") Shipping Weight: Weight 37.3kg (82.0lbs)

This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for your Lada Niva 4x4 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRLN001T - Lada Niva 4x4 Slimline II Roof Rack Kit - by Front Runner Consisting of: 3x LASS103 - No 3 Leg 155mm (Pair)1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 28.43kg (62.68lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")   Shipping Weight: Weight: 26.96kg (59lbs)

This drawer kit has 2 lockable drawers, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions. 113kg / 250 lb per drawer load carrying capacity. High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base. This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicles existing mounting points and the drawer mounting brackets. Removing the drawers is just as easy. Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear. The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System. Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps. The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides. Faceplates have 6 pre cut knock-outs for adding monitoring or electrical panel socket inserts. The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc. To create a removable box option, just insert 2 Cub Pack. Designed to fit inside Front Runner drawers, the Cub Pack can be used to further organize and move gear in and out of a vehicle. To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer. The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicles interior contours. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. All Front Runner Storage Systems are backed by a 2 year warranty. The LAND ROVER ALL-NEW DISCOVERY DRAWER KIT allows access to the spare wheel winder through an access "port" in the top deck. There is no need to remove the drawers to lower the spare. *Please Note: Cub Pack and Drawer Dividers are not included when purchasing this Drawer System and are sold separately. Features Consists of: 1 x Front Runner Drawer unit (SSDR002) 1 x Land Rover All-New Discovery Deck Completion Set 2 x Push to Close latch with 2 keys per lock 3 x Accessory Channels 6 x Eye Nuts for Accessory Channel 1 x T Wrench with 1 custom sockets for wheel winder Installation Hardware including 4 turnbuckles to secure unit to vehicle Fitting Instruction Materials used: Aluminum - Accessory Channels & Sub Frame Black powder coated steel - Drawer Bins & Frame Carpet & Laminated plywood - Top Deck & Deck Set Product Dimensions: Overall Dimensions: 974mm (38.3") L x 1324mm (52.1") W x 330mm (13") H Interior Drawer Dimensions: Left Hand Drawer: 914mm (36") L x 461mm (18.2") W x 208mm (8.2") H Right Hand Drawer: 914mm (36") L x 373mm (14.7") W x 208mm (8.2") H Weight: 82.4kg (181.7lbs) Load Rating: 113Kg (250lbs) per Drawer Special Notes: Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.

This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment. This 1762mm/69.4" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Foot Rails to mount the Slimline II Tray to your All-New Discovery (L462). It easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.NOTE: Land Rover Roof Rails are required for fitment. All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. Consisting of: 1 x FALD007 - Land Rover All-New Discovery Foot Rails - by Front Runner1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner Material used: Black epoxy powder-coated T6 aluminiumHigh strength steel Approximate Installed Weight: 27kg (60lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width 455mm (18")Length 1615mm (64")Height 250mm (10") Shipping Weight: Weight 31.9kg (70.1lbs)

Made out of steel. Polyethylene plastic coated for protection against the elements. Designed specifically for your Land Rover Defender. Requires drilling. Features Consists of: 2x Large light protectors 4x Small light protectors 12x Self tapping screws Materials used: Black plastic-coated high strength steel

Keep your vehicle's headlights protected from damage with these tough, plastic coated, headlight protectors. Made out of high strength steel. Polyethylene plastic coated for protection against the elements. Mounts to existing mounting points on your Land Rover Defender and uses the original nuts and bolts. Designed specifically for your Land Rover Defender.

This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit for the Land Rover Defender contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Installs easily with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty* PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase. Features KRLDT01L - Land Rover Defender (1983-2016) Slimline II 1/2 Roof Rack Kit / Tall - by Front Runner Consisting of: 3x LASS108 - No 8 Leg 250mm (Pair) 1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 31.48kg (69.4lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18") Length: 1730mm (68") Height: 140mm (6") Shipping Weight: Weight: 31.48kg (69lbs)

This safe is bolted to the body of the vehicle under the original center console and is manufactured from 2mm thick mild steel. It features a tamper proof cam lock and is carpet lined to protect your valuables and prevent rattling. Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8. Features Consists of: 1x Under console safe 2x Keys supplied Materials used: Black powder-coated mild steel Carpeted base Product Dimensions: 433mm (17.1") L x 275mm (10.8") W x H 100mm (3.9") Internal Dimensions: 375mm (14.8") L x 265mm W (10.4") (Raised section)/205mm (8.1") W (Lower Section) x 107mm (4.2") H Weight: 3.2kg (7.1lbs)