FRONT RUNNER Land Rover Defender 90/110 (1983-2016) Station Wagon Spare...
$940.00
$1,175.00
A spare wheel carrier that mounts onto your Land Rover Defender 90 & 110 Station Wagon and keeps that spare wheel safe and secure.
FRONT RUNNER Potjie Pot/Dutch Oven And Carrier - RRAC081
$281.60
$352.00
Theres no better place to keep potentially hot, grimy, dirty, and cumbersome camp kitchen supplies than up and out of the way, outside the vehicle.
The Front Runner Potjie Pot Carrier offers a sensible way to travel with a potjie pot.
The potjie pot is secured in the bracket by the three legs. The supplied ratchet strap threads through the lid of the pot and fixes points on the bracket.
The #3 cast iron pot holds 7.8L / 2.1 Gallons. The round shape and cast iron allows the heat to flow evenly around the sides and maintain liquids at the lowest point to keep them from burning. The lid has a deep lip for holding hot coals.
The high strength steel carrier is finished with the same durable, weather resistant powder coating as the Front Runner Slimline II Rack.
Like all Front Runner rack accessories, the installation is simple. Just slide the bolts into the t-slots of any Front Runner Rack Tray, set down the carrier, then add nuts and tighten.
Features
Consists of:
Rack mounted bracket
Strap guide
Ratchet strap
mounting hardware
No 3 cast iron pot
Materials used:
Black powder-coated high strength steel
Nylon strap
Cast iron pot
Product Dimensions:
280mm (11") W x 280mm (11") D x 343mm (13.5") H
Pot Specifications:
No. 3 potjie Pot - 7.8l (2.1gal) capacity
Max outer diameter: 290mm (11.4")
Height: 300mm (11.8")
Lid max outer diameter: 260mm (10.2")
Total Weight:
11.25kg (24.9lbs)
FRONT RUNNER Potjie Pot/Dutch Oven Carrier - RRAC062
$98.40
$123.00
Create deliciously hearty meals out in the wilderness, fit for the avid explorer and overlanding veterans alike.
The Front Runner Potjie Pot/Dutch Oven Carrier is a safe and durable means of transporting your potjie pot/dutch oven where ever your travels may take you.
The potjie pot/dutch oven is placed centrally into the bracket with the three legs fitting into the holes in the three protrusions extending from the centre of the bracket. The supplied ratchet strap threads through the lid of the pot and fixes to pre-drilled points on the bracket.
Made of corrosion resistant steel and black powder-coated with an industry preferred, outdoor rated coating.
Features
Consists of:
Potjie bracket for No 2 & No 3 pot
Ratchet strap
Mounting hardware
Materials used:
Black powder-coated steel
Product Dimensions:
276mm (10.9") L x 229mm (9") W x 133mm (5.2") H
Weight:
2kg (4.4lbs)
FRONT RUNNER Pro Canoe / Kayak / Sup Carrier -...
$580.00
$725.00
Fits most size canoes, kayaks, SUPs and surf skis. The space between the brackets is only limited by the length of your Front Runner Roof Rack or distance between your Load Bars.
Highly adjustable brackets allow for multiple mounting angles for your canoe, kayak or SUP.
The foam-padded holders are self-adjusting for the perfect fit to the hull of your boat.
The dense weather-resistant open cell foam pads are covered with a water-repellent polyester cover that is UV stabilized to prevent fading.
Pads can be easily replaced if damaged in any way.
Toys are secured to the Canoe / Kayak / SUP Carrier using the supplied Front Runner Stratchits straps and eye nuts.
The included Front Runner adjustable and stretchable Stratchits are the perfect tie-down for serious cargo.
The quick and efficient straps will keep loads stable and secure without damaging surfaces and are rated up to 300 lbs.
The Stratchit's clever cinching system creates an easy-on, and easy-off, secure transport every time.
Complete kit includes everything necessary to secure your water toys to Front Runner Roof Racks or Load Bars.
Weight limit: 60kg (132 lbs).
Features
Consists of:
2 x Adjustable Holders
4 x Pads
1 x Pair of Stratchits
4 x Eye nuts
Installation Hardware
Fitting Instructions
Materials used:
Adjustable Holders:
Black powder coated steel
EPE (Expandable Polyethylene) foam Pads:
100% UV protected polyester outer shell
100% polyester lining
Product Dimensions (fully opened):
700mm (27.6") L x 75mm (3") W x 112mm (4.4") H (Single Holder)
Weight:
6.2kg (13.7lbs) (Holder Set)
FRONT RUNNER Kayak Carrier / Foldable J Style - RRAC256
$207.20
$259.00
Designed to carry a variety of hull shapes as well as SUPs.
This is a J style Kayak foldable bracket.
The cushioned padded bars protect the hull.
Large contact surface area for extra stability when transporting your kayaks.
Includes 2 x Tie Down Straps with protective buckle bumpers.
Installation hardware supplied.
Features
Consists of:
2 x Foldable Kayak Carrier Brackets
2 x Tie Down Straps
Installation Hardware
Fitting Instructions
Open Dimensions
795mm (31.3") L x 426mm (16.8") W x 462mm (18.1") H
Closed Dimensions
472mm (18.6") L x 270mm (10.6") W x 102mm (4") H
Weight
5.17kg (11.4lbs)
FRONT RUNNER Load Bed Rack Side Mount For Bike Carrier...
$174.40
$218.00
Secure your bicycle on the side your Front Runner Load Bed Rack Kit with this adjustable Bike Carrier / Load Bed Rack Side Mount without using up any rack space.
Works with Pro Fork Mount Bike Carrier / Power Edition or Pro Thru Axle Bike Carrier / Power Edition*.
The pair of brackets can be installed on the Left-hand or Right-hand side of the Front Runner Rack using the rack slats and rack legs to provide a secure ledge to mount your Front Runner Bike mount (Pro Fork Mount Bike Carrier / Power Edition OR Pro Thru Axle Bike Carrier / Power Edition)*.
Adjustable to fit all bicycle sizes with the included extension plate.
*Note: Pro Fork Mount Bike Carrier / Power Edition or Pro Thru Axle Bike Carrier / Power Edition Sold Separately
Features
Consists of:
2 x Top Mounts Plates
2 x Bottom Mount Plates
2 x Leg Clamps
1 x Extension Plate
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
276mm (10.9") L x 186mm (7.3") W x 170mm (7") H
Weight:
3.7kg (8.2lbs)
FRONT RUNNER Pro Bike Carrier - RRAC148
$728.00
$910.00
Easily install onto your Front Runner Rack in minutes.
No front wheel removal necessary.
Suitable for all bike sizes; all frame styles including composite carbon frames; all thru axle and brake configurations as well as Lefty forks and full suspension bikes.
Front wheel holder is easily adjusted and holds the bike steady while the rear Wheel Holder is secured.
Adjustable to secure most wheel diameters including road bikes, MTB and fat bikes with tire widths ranging from 18mm/0.7" up to 132mm/5.2".
The carrier folds flat and secures onto your rack when not in use.
Bike can be locked using Rack Accessory Lock / Large.
Constructed with same weather resistant stainless steel and powder coating as the Front Runner racks and mounting systems.
Features
Consists of:
1 x Bike Carrier
1 x Bike Carrier Rack Clamp
1 x Rear Wheel Holder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Plastic
Product Dimensions:
Bike Carrier (Closed):
825mm (32.5") L x 205mm (8.1") W x 100mm (3.9") H
Rear Wheel Holder:
230mm (9.1") L x 170mm (6.7") W x 70mm (2.8") H
Weight:
9.4kg(20.7lbs)
Special Notes:
Suitable for all bike sizes incl. Fat Bikes
FRONT RUNNER Pro Fork Mount Bike Carrier / Power Edition...
$108.80
$136.00
Upright bike carrier, made from strong steel and aluminum.
Powder-coated in the same durable finish as the Front Runner rack and load bars for durability.
Front fork clamp features a quick release that fits all standard fork dropouts.
Rear wheel holder can accommodate all wheel sizes and widths from 700c x 23mm road wheels up to 26 x 4.5" fat bike tires.
Quickly secure and adjust the rear wheel with the robust ratcheting buckle and strap.
Note: Fitment to a rack requires a minimum rack length of 1156mm (6 slats).
Note: This solution is not compatible with Boost Hubs/Forks.
Features
Consists of:
1 x Fork Clamp
1 x Rear Wheel Holder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel & aluminum
Rubber ladder strap
Plastic ratchet buckle
Overall Product Dimensions:
300mm (11.8") L x 176mm (6.9") W x 81mm (3.2") H
Rear Holder:
230mm (9.1") L x 176mm (6.9") W x 81mm (3.2") H
Front Clamp:
70mm (2.8") L x 152mm (6") W x 114mm (4.5") H
Weight:
1.6kg (3.5lbs)
FRONT RUNNER Pro Surfboard, Windsurf And Paddle Board Carrier -...
$249.60
$312.00
Made of stainless steel and sealed with the same durable, weather rated powder coating as the Front Runner Slimline Roof Racks.
The ultra dense yet soft weather resistant rubber pads cradle your valuable gear without harming or scratching the surfaces.
The Stratchit straps clever cinching system mean easy-on and easy-off secure transport every time.
Adjustable to hold all shapes and lengths of boards across the width and length of Front Runner Slimline Roof Racks or Front Runner Load Bars.
Each Front Runner Board Carrier can hold 1 to 2 boards.
Most Front Runner Roof Racks and Load Bar widths will accommodate a 2nd Front Runner Board Carrier to hold up to 4 boards.
Includes:
2 pairs of board holders
1 pair of Front Runner Stratchits
All hardware necessary to mount to a Slimline Roof Rack, Load Bars, or other flat surface.
Installation Manual
Made in South Africa
Features
Consists of:
2x Brackets
2x Stratchit Strap
Bolt Kit
Materials used:
Black powder-coated Steel
Polyethylene pads
Product dimensions:
L 276mm (10.9") x W 76mm (3") x H 67mm (2.6")
Weight:
Individual bracket: 0.6kg (1.3lbs)
Entire kit: 2.9kg (6.4lbs)
FRONT RUNNER Land Rover Defender Ute/Dc Spare Wheel Carrier /...
$801.60
$1,002.00
A spare wheel carrier for the Land Rover Defender 90 and 110 Ute.
Allows fitment of an additional spare wheel to the rear of the vehicle.
Secures to the chassis and the load bed body with supplied brackets and hardware.
The spare wheel can then swing open to allow the tail gate to be opened.
FRONT RUNNER Land Rover Defender 130 Ute Spare Wheel Carrier...
$1,004.00
$1,255.00
A spare wheel carrier for the Land Rover Defender 130/DC Ute.
Allows fitment of an additional spare wheel to the rear of the vehicle.
Secures to the chassis and the load bed body with supplied brackets and hardware.
The spare wheel can then swing open to allow the tail gate to be opened.
Load capacity 60kg (132.3lbs)
FRONT RUNNER Vertical Surfboard Carrier - RRAC095
$368.80
$461.00
These two movable holders securely clamp your surfboard in-place vertically on either side of a Front Runner Slimline II Rack for easy transportation to free up room for other gear like Roof Top Tents, Kayaks, bikes, water and fuel, etc.
Adjust the holders along the length of the rack to accommodate various size boards.
2 supplied Front Runner Stratchits hold the Surfboard snug against padded side rests. The Stratchit straps clever cinching system provide easy-on and easy-off secure transport every time.
The vertical holders can be folded down and stored flat against the rack top.
If space on the rack top is available, the holders can be used in their flat “horizontal” positions to mount a surfboard or other larger boards for SUP or wind surfing.
Each vertical holder and side rest has soft touch foam padding to cradle your valuable gear without harming or scratching the surfaces. The Soft touch pads are made from a weather resistant cross-linked, closed cell Polyethylene.
Included rubber pads provide further protection between your board and the Front Runner Stratchit straps.
The brackets are made from steel and sealed with the same durable, weather resistant black powder coating as the Front Runner Slimline II Roof Racks.
In the vertical position the holders measure 400mm (15.8") high from the underside of the Slimline II Rack Tray. When folded flat in the locked horizontal position the holders measure 45mm high from the underside of the Slimline II Rack Tray.
Can be used with Front Runner Slimline II Roof Racks, Bed Racks and Trailer Racks.
Easily bolts to your Slimline II Rack with supplied hardware.
Includes all necessary installation hardware and fitting instructions.
Consists of:2 x Board Mounting Brackets2 x Slimline II Rack Latch Brackets1 x Pair of Stratchits1 x Pair of Tie Down RingsInstallation HardwareFitting InstructionsMaterials used:Black powder coated high strength steel304 Stainless SteelFoam PadRubberProduct Dimensions:Outer Dimensions (Single Holder):559mm (22") L x 85.5mm (3.4") W x 98.5mm (3.9") HOpen Dimensions (Single Holder):161mm (6.3") L x 85.5mm (3.4") W x 445mm (17.5") HWeight:3.4kg (7.5lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
