Brands

The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines. With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems. PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.

Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.

The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator. Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation. The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines. With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems. PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.

Direction-Plus™ Universal ProVent® Ultimate Catch Can PV150DPK kit comes with Provent Element 150 + fittings. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance. NOTE: This kit does not include brackets. If you need the same kit with brackets go to PV151DPK Advantages of The Direction-Plus™ ProVent® Oil Separator PV150DPK Kit: • Ultra-compact design• Up to 150 l/min blow-by gas• Equipped as standard with high-efficiency medium• Pressure regulation• Available with by-pass or pressure-relief valve• Suitable for use as an open or closed CCV• Use of two ProVent 150 in parallel possible• Protection against incorrect insertion of replacement element through symmetrical design• Check valve for oil return available as option (recommended)• Cover position adjustable in steps of 3 degrees

Direction-Plus™ Universal ProVent® oil separator PV200DPK kit comes with drain and adapters. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. . It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance. Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DPK Kit: • Up to 200 l/min blow-by gas • Very compact design • Available with high-efficiency or ultra-efficiency medium \n• Integrated pressure regulation for crankcase • Also available with bypass valve (integrated in separation element) • Tool-free element replacement with protection against incorrect insertion through turn-lock mechanism and element with integrated handle • Suitable for use with open or closed CCV system • Use of two ProVent 200 in parallel possible • Check valve for oil return available (recommended) 

MSA Mitsubishi Triton MV (02-2024 -Current) Black, Electric, Indicators - TM2850   MSA 4X4’s patented towing mirrors are designed to suit any situation, whether you're towing a caravan, trailer, boat, or simply driving day-to-day. Featuring a large single mirror mounted on a heavy-duty extension slide, the mirrors can easily transition between towing and standard driving positions, providing outstanding visibility and convenience. Unlike traditional towing mirrors that are designed primarily for towing, MSA 4X4 has developed a mirror system that excels in both towing and everyday driving applications. The innovative pivot design allows the mirrors to be adjusted for maximum visibility while maintaining practicality for parking, garages, and tight spaces. Safety is at the forefront of every MSA 4X4 product. These towing mirrors are ADR tested and compliant, ensuring confidence and peace of mind wherever your journey takes you. FEATURES: Black Electric Indicator Heat BSM Power Fold Camera Provision

TORQIT Airbox for TOYOTA LANDCRUISER 300 SERIES Powder Coated Matte Black (AB12SS) Part Number: AB12SS Upgrade the airflow, filtration efficiency, and engine protection of your TOYOTA LANDCRUISER 300 SERIES with the TORQIT Powder Coated Matte Black Airbox. Designed and manufactured in Australia, this premium stainless steel airbox is engineered to deliver improved airflow while ensuring your engine receives clean, filtered air for optimal performance and long-term reliability. Constructed from premium 304-grade stainless steel and finished in a durable matte black powder coat, the TORQIT Airbox is built to withstand harsh off-road conditions, water crossings, and extreme under-bonnet temperatures. Its high-capacity design promotes increased airflow and filtration efficiency, helping your LANDCRUISER perform at its best whether towing, touring, or tackling remote tracks. Key Features Designed specifically for TOYOTA LANDCRUISER 300 SERIES models Premium 304-grade stainless steel construction Durable matte black powder-coated finish CNC folded and laser-cut design Raised and tapered lid for increased airflow capacity Integrated Donaldson water drainage valve Uses the factory air filter for simple servicing Quick-release clips provide tool-free air filter access Utilises factory rubber mounting points for straightforward installation Simple bolt-on installation Backed by a 5-year warranty Engineered for Maximum Airflow Unlike many aftermarket airboxes that simply increase filter size, the TORQIT Airbox incorporates a raised and tapered lid design to increase internal air capacity. This allows the air filter to operate more efficiently, maximising airflow and filtration performance while helping maintain consistent engine efficiency. The result is improved engine breathing, enhanced throttle response, and superior filtration performance to help protect critical engine components from dust and contaminants. Built for Australian Conditions Manufactured from stainless steel up to 2mm thick, the TORQIT Airbox is built to handle Australia's harshest touring and off-road environments. The robust construction resists corrosion, heat, and vibration while maintaining structural integrity over years of demanding use. An integrated Donaldson Water Evacuator assists in draining water that enters the airbox, helping provide additional protection during wet and muddy driving conditions. Vehicle Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Compatible with TORQIT snorkel systems and factory intake components Designed to work with the factory air filter Installation The airbox is designed as a direct bolt-on upgrade using factory rubber mounting points and the factory air filter. Quick-release clips provide easy access to the filter without requiring tools, simplifying routine maintenance and servicing. Important Information Please Note: This is a manufactured-to-order product. While key components may be held in stock, final assembly and powder coating are completed to order and may require additional processing time before dispatch. Warranty 5-Year Manufacturer Warranty Designed and manufactured in Australia Built for long-term durability and performance Why Upgrade? The TORQIT AB12SS Powder Coated Matte Black Airbox delivers improved airflow, enhanced filtration efficiency, and superior engine protection for your LANDCRUISER 300 SERIES. Its premium stainless steel construction, high-capacity design, and durable matte black finish make it the ideal upgrade for serious touring, towing, and off-road applications.

TORQIT Stainless Steel Snorkel – TOYOTA LANDCRUISER 300 SERIES Part Number: SN12SS TORQIT’s Stainless Steel Snorkel is a fully sealed, one-piece construction designed to maximise airflow and protect your engine in harsh conditions. Australian-designed and rigorously tested, it is built to handle demanding off-road environments. By elevating your vehicle’s air intake, the snorkel improves air quality entering the engine, resulting in better performance, efficiency, and potential fuel savings. It also acts as essential protection when driving through dust or water crossings, reducing engine wear and extending vehicle lifespan. Key Benefits Improved engine performance and airflow Protection against dust and water ingestion Reduced engine wear and maintenance Enhanced fuel efficiency and longevity Premium Stainless Steel Construction Manufactured from 304 grade stainless steel, each snorkel is mandrel bent from a single piece to ensure a fully sealed unit with no joins. The smooth internal diameter maximises airflow, while the streamlined external design reduces snagging when off-road. Mandrel bent one-piece construction Fully sealed design for maximum protection High structural rigidity for extreme conditions Corrosion-resistant and temperature stable Designed for Australian Conditions Tested in harsh environments, TORQIT snorkels maintain strength in extreme temperatures without warping or corroding. The durable construction ensures long-term reliability for serious off-road use. Features Heavy-duty stainless steel with strong mounting brackets Choice of brushed stainless or satin black powder coat finish DIY installation with vehicle-specific fitting template Includes rust-proof paint for guard cut and rubber pinch weld Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Compatible with factory or TORQIT stainless steel airbox Works with most roof racks and light bars Warranty 5-year product warranty Does not void factory vehicle warranty Why Upgrade? Upgrading to a TORQIT Stainless Steel Snorkel enhances airflow, improves engine efficiency, and adds a durable, premium look to your vehicle—making it an essential upgrade for off-road and touring setups.

TORQIT Powder Coated Matte Black Snorkel for TOYOTA LANDCRUISER 300 SERIES – Standard Airbox (SN12SS) Part Number: SN12SS The TORQIT Powder Coated Matte Black Snorkel is engineered specifically for the TOYOTA LANDCRUISER 300 SERIES equipped with the factory standard airbox. Featuring a fully sealed, one-piece stainless steel construction with a durable matte black powder-coated finish, this snorkel is designed to maximise airflow while protecting your engine from dust, water, and harsh off-road conditions. Australian-designed and extensively tested, the SN12SS delivers reliable performance in demanding environments, making it an essential upgrade for touring, towing, and off-road adventures. Key Benefits Improved engine airflow and performance Protects against dust, water, and debris ingestion Reduces engine wear and maintenance costs Helps maintain engine efficiency and longevity Premium matte black powder-coated finish Fully sealed design for maximum protection Mandrel-bent one-piece construction Exceptional strength and structural rigidity Built for Australian Conditions Designed to withstand Australia's toughest environments, the TORQIT snorkel maintains its strength and appearance in extreme temperatures and harsh weather conditions. The powder-coated finish provides additional protection while delivering a sleek, factory-style appearance. Features Durable matte black powder-coated finish Strong mounting brackets for secure installation Vehicle-specific fitting template included Includes rust-proof paint for guard cut protection Rubber pinch weld supplied for a professional finish Fully sealed system for maximum engine protection Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Designed for vehicles equipped with the factory standard airbox Compatible with most roof racks and light bars Warranty 5-Year Product Warranty Does not void factory vehicle warranty Why Upgrade? The TORQIT SN12SS Powder Coated Matte Black Snorkel improves airflow to your LANDCRUISER 300 SERIES while providing critical protection during dusty tracks, water crossings, and challenging off-road conditions. Its premium matte black finish, durable construction, and Australian-engineered design make it a practical and stylish upgrade for any serious touring setup.

TORQIT Powder Coated Matte Black Snorkel for TOYOTA LANDCRUISER 300 SERIES – Standard Airbox (SN12SS) Part Number: SN12SS The TORQIT Powder Coated Matte Black Snorkel is engineered specifically for the TOYOTA LANDCRUISER 300 SERIES equipped with the factory standard airbox. Featuring a fully sealed, one-piece stainless steel construction with a durable matte black powder-coated finish, this snorkel is designed to maximise airflow while protecting your engine from dust, water, and harsh off-road conditions. Australian-designed and extensively tested, the SN12SS delivers reliable performance in demanding environments, making it an essential upgrade for touring, towing, and off-road adventures. Key Benefits Improved engine airflow and performance Protects against dust, water, and debris ingestion Reduces engine wear and maintenance costs Helps maintain engine efficiency and longevity Premium matte black powder-coated finish Fully sealed design for maximum protection Mandrel-bent one-piece construction Exceptional strength and structural rigidity Built for Australian Conditions Designed to withstand Australia's toughest environments, the TORQIT snorkel maintains its strength and appearance in extreme temperatures and harsh weather conditions. The powder-coated finish provides additional protection while delivering a sleek, factory-style appearance. Features Durable matte black powder-coated finish Strong mounting brackets for secure installation Vehicle-specific fitting template included Includes rust-proof paint for guard cut protection Rubber pinch weld supplied for a professional finish Fully sealed system for maximum engine protection Compatibility Fits TOYOTA LANDCRUISER 300 SERIES Designed for vehicles equipped with the factory standard airbox Compatible with most roof racks and light bars Warranty 5-Year Product Warranty Does not void factory vehicle warranty Why Upgrade? The TORQIT SN12SS Powder Coated Matte Black Snorkel improves airflow to your LANDCRUISER 300 SERIES while providing critical protection during dusty tracks, water crossings, and challenging off-road conditions. Its premium matte black finish, durable construction, and Australian-engineered design make it a practical and stylish upgrade for any serious touring setup.

Focal SUB 20 SF 8" Slatefiber Subwoofer The Focal SUB 20 SF is a premium 8-inch (200mm) passive subwoofer engineered to deliver powerful, accurate and controlled bass performance in compact vehicle audio installations. Part of Focal’s second-generation Slatefiber range, the SUB 20 SF combines advanced French acoustic engineering with innovative cone technology to provide deep low-frequency response while maintaining the speed, precision and musicality that Focal is renowned for. Manufactured in France, the Slatefiber cone is constructed from recycled carbon fibres combined with thermoplastic polymer. This exclusive material delivers the ideal balance of rigidity, lightweight construction and damping, allowing the subwoofer to reproduce bass frequencies with excellent control, reduced distortion and impressive responsiveness. Designed for sealed and vented enclosure applications, the SUB 20 SF offers exceptional versatility for custom car audio installations where space is limited but performance remains a priority. Its compact 8-inch format makes it suitable for boot installations, spare wheel well enclosures and integrated audio upgrades while still providing strong low-end impact and musical accuracy. With 200W RMS power handling, 400W maximum power, a 4 Ohm impedance and a robust ferrite motor assembly, the SUB 20 SF delivers reliable performance when paired with a quality monoblock or multi-channel amplifier. The durable butyl surround further enhances control and long-term reliability, ensuring consistent performance across a wide range of listening conditions. Key Features Premium 8" (200mm) passive subwoofer French-made Slatefiber cone technology 200W RMS power handling 400W maximum power handling 4 Ohm impedance 52mm (2") voice coil Ferrite motor structure Durable butyl rubber surround Compact design ideal for space-conscious installations Designed for accurate, controlled and dynamic bass reproduction Suitable for sealed and vented enclosure applications Manufactured in France Performance Benefits Deep and controlled bass response Fast transient response for greater musical accuracy Excellent low-frequency extension without excessive distortion Compact size for flexible installation options Seamless integration with Slatefiber speaker systems Ideal for SQ-focused and daily driving audio systems Technical Specifications Product Type Passive Subwoofer Series Slatefiber Subwoofer Size 8" (200mm) Cone Material Slatefiber RMS Power Handling 200W Maximum Power Handling 400W Nominal Impedance 4 Ohm Sensitivity 87dB (2.83V/1m) Voice Coil Diameter 52mm (2") Motor Type Ferrite Surround Material Butyl Rubber Installation Position Boot, Spare Wheel Well, Custom Enclosures Country of Manufacture France What's Included 1 x Focal SUB 20 SF 8" (200mm) Slatefiber Subwoofer Why Choose the Focal SUB 20 SF? The SUB 20 SF is designed for enthusiasts who want premium bass performance without sacrificing installation flexibility. Its compact footprint, advanced Slatefiber cone technology and high-power handling capabilities make it an ideal solution for upgrading factory audio systems or complementing a high-end Focal speaker setup. Delivering the signature Focal balance of precision, dynamics and musicality, the SUB 20 SF provides powerful low-frequency reinforcement while maintaining the detail and accuracy needed for a truly immersive listening experience.

Focal 165 SF3 6.5" Slatefiber 3-Way Component Speaker Kit The Focal 165 SF3 is a premium 165mm (6.5") 3-way component speaker system designed to deliver exceptional detail, accuracy and immersion throughout the entire frequency range. Combining a dedicated 165mm Slatefiber woofer, 65mm midrange driver and Focal’s renowned aluminium/magnesium inverted dome tweeter, the 165 SF3 creates a wide and realistic soundstage with remarkable clarity from deep bass through to delicate high frequencies. Manufactured in France, the Slatefiber cone technology uses recycled carbon fibres blended with thermoplastic polymer to achieve an ideal balance of rigidity, lightness and damping. This advanced construction helps reduce unwanted resonance while improving transient response, delivering natural vocals, precise instrumentation and controlled bass performance. The dedicated 65mm midrange driver enhances vocal presence and instrument separation, allowing music to sound more open, detailed and realistic. Combined with the aluminium/magnesium inverted dome tweeter, the system produces smooth and refined high frequencies while maintaining excellent definition and listening comfort. Designed for flexibility and ease of installation, the 165 SF3 features separable crossovers and adjustable tweeter level settings of -3dB, 0dB and +3dB to suit different vehicle interiors and listening preferences. The system also incorporates an aluminium rotor design frame, durable butyl surrounds and premium construction throughout, ensuring long-term reliability and outstanding acoustic performance. Key Features Premium 165mm (6.5") 3-way component speaker system French-made Slatefiber woofer cone technology Dedicated 65mm midrange driver for enhanced vocal detail Aluminium/Magnesium inverted dome tweeter Wide and immersive soundstage reproduction 80W RMS power handling 160W maximum power handling 4 Ohm impedance 91dB sensitivity 55Hz – 21kHz frequency response Adjustable tweeter levels: -3dB / 0dB / +3dB Separable crossover design for installation flexibility Ferrite motor structure Butyl surround for durability and stability Premium aluminium frame construction Suitable for high-end factory and custom audio upgrades Performance Benefits Dedicated midrange driver improves vocal clarity and realism Enhanced soundstage width and imaging accuracy Detailed and natural reproduction across the entire frequency spectrum Controlled bass response with excellent midrange definition Smooth and refined treble performance Ideal for audiophile-level car audio system upgrades Technical Specifications Product Type 3-Way Component Speaker Kit Woofer Size 165mm (6.5") Midrange Size 65mm Cone Material Slatefiber Tweeter Type Aluminium/Magnesium Inverted Dome Voice Coil Diameter 25mm Frequency Response 55Hz – 21kHz Sensitivity 91dB Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Power Handling 160W Tweeter Level Adjustment -3dB / 0dB / +3dB Crossover Type Separable Motor Type Ferrite Surround Material Butyl Mounting Depth 70mm Frame Construction Aluminium Rotor Design What's Included 2 x Focal 165mm Slatefiber Woofers 2 x 65mm Midrange Speakers 2 x Aluminium/Magnesium Inverted Dome Tweeters 2 x Separable Crossovers Mounting Brackets Installation Screws Installation Hardware Premium Construction & Installation Flexibility The 165 SF3 has been engineered for straightforward integration into a wide range of vehicles. Its dedicated 65mm midrange driver is particularly suited to installations in select General Motors, Toyota and Mercedes-Benz models, while the separable crossover design allows installers greater flexibility when positioning components for optimum performance. Combined with Focal’s premium materials, advanced acoustic engineering and renowned French manufacturing quality, the 165 SF3 delivers an immersive listening experience with exceptional balance, dynamics and precision throughout the entire frequency range.

Focal 200 SF 8" Slatefiber 2-Way Component Speaker Kit The Focal 200 SF is a premium 200mm (8") 2-way component speaker kit engineered for drivers seeking a powerful and dynamic upgrade over factory-installed audio systems. As part of Focal’s renowned Slatefiber range, the 200 SF combines a large-format Slatefiber woofer with an aluminium/magnesium inverted dome tweeter to deliver impressive bass response, detailed midrange reproduction and refined high-frequency performance. Designed and manufactured in France, the Slatefiber woofer cone utilises recycled carbon fibres blended with thermoplastic polymer to achieve the ideal balance of rigidity, lightweight construction and damping. The larger 200mm driver provides greater low-frequency output and improved mid-bass impact, making it an excellent choice for vehicles capable of accommodating an 8-inch speaker upgrade. High frequencies are handled by Focal’s aluminium/magnesium inverted dome tweeter, delivering smooth and precise treble without harshness. Adjustable tweeter level settings of -3dB, 0dB and +3dB allow fine-tuning to suit different vehicle acoustics and personal listening preferences, ensuring optimal sound quality throughout the cabin. With separable crossovers for flexible installation, 80W RMS power handling, 160W maximum power and 91dB sensitivity, the Focal 200 SF provides excellent performance when paired with a quality amplifier or upgraded audio system. Its durable butyl surround, ferrite motor structure and robust aluminium chassis ensure reliable long-term performance while maintaining Focal’s signature sound quality. Key Features Premium 200mm (8") 2-way component speaker kit French-made Slatefiber woofer cone technology Larger 8" woofer for enhanced bass response and impact Aluminium/Magnesium inverted dome tweeter Exceptional clarity, imaging and soundstage performance 80W RMS power handling 160W maximum power handling 4 Ohm impedance 91dB sensitivity 60Hz – 21kHz frequency response Adjustable tweeter levels: -3dB / 0dB / +3dB Separable crossover design for flexible installation Ferrite motor structure Butyl surround for durability and control Ideal for premium car audio system upgrades Performance Benefits Stronger bass response compared to smaller component speaker kits Natural vocal reproduction and detailed midrange clarity Smooth and refined high-frequency performance Improved soundstage and stereo imaging Excellent efficiency for use with factory or aftermarket amplification Built for long-term reliability and consistent performance Technical Specifications Product Type 2-Way Component Speaker Kit Woofer Size 200mm (8") Cone Material Slatefiber Tweeter Type Aluminium/Magnesium Inverted Dome Voice Coil Diameter 25mm Frequency Response 60Hz – 21kHz Sensitivity 91dB Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Power Handling 160W Tweeter Level Adjustment -3dB / 0dB / +3dB Crossover Type Separable Motor Type Ferrite Surround Material Butyl Mounting Depth 70mm Speaker Depth 63mm Grilles Included Yes What's Included 2 x Focal 200 SF 200mm Slatefiber Woofers 2 x Aluminium/Magnesium Inverted Dome Tweeters 2 x Separable Crossovers Protective Speaker Grilles Mounting Brackets Installation Screws Installation Hardware Documentation Why Choose Focal Slatefiber? Focal’s Slatefiber technology combines recycled carbon fibres with advanced thermoplastic materials to create a speaker cone that is both lightweight and exceptionally rigid. This unique construction minimises unwanted resonance while improving accuracy, delivering cleaner vocals, stronger bass response and greater musical detail across the entire frequency range. Designed and manufactured in France, the Focal 200 SF is an ideal solution for enthusiasts seeking a larger-format speaker upgrade that combines powerful bass performance with the clarity, precision and reliability that Focal is known for worldwide.

Focal 165 SF 6.5" Slatefiber 2-Way Component Speaker Kit The Focal 165 SF is a premium 165mm (6.5") 2-way component speaker kit designed to deliver a significant upgrade over factory-installed audio systems. Part of Focal’s acclaimed Slatefiber range, the 165 SF combines advanced French acoustic engineering with premium materials to produce exceptional clarity, accurate vocals and dynamic sound performance throughout the vehicle cabin. At the heart of the system is Focal’s innovative Slatefiber woofer cone, manufactured in France using recycled carbon fibres and thermoplastic polymer. This unique construction provides an ideal balance of rigidity, lightweight performance and damping characteristics, resulting in clean midrange reproduction, controlled bass response and impressive musical detail. Complementing the woofer is Focal’s renowned aluminium/magnesium inverted dome tweeter, engineered to deliver smooth and detailed high frequencies without harshness. Adjustable tweeter level settings of -3dB, 0dB and +3dB allow the system to be tailored to different vehicle acoustics and personal listening preferences. With separable crossovers, flexible installation options and high sensitivity performance, the 165 SF integrates easily into both factory and aftermarket systems. Delivering 80W RMS power handling, 160W maximum power and a wide 60Hz–21kHz frequency response, this component kit offers exceptional sound quality for enthusiasts seeking greater realism, imaging and overall musical enjoyment. Key Features Premium 165mm (6.5") 2-way component speaker kit French-made Slatefiber woofer cone technology Aluminium/Magnesium inverted dome tweeter Exceptional vocal clarity and soundstage performance 80W RMS power handling 160W maximum power handling 4 Ohm impedance 91dB sensitivity 60Hz – 21kHz frequency response Adjustable tweeter levels: -3dB / 0dB / +3dB Separable crossover design for flexible installation Ferrite motor structure Butyl surround for durability and control Suitable for premium factory audio upgrades and custom installations Performance Benefits Improved clarity and detail across all music genres Natural vocal reproduction and enhanced imaging Controlled mid-bass response with reduced distortion Smooth and refined high-frequency performance High sensitivity for strong output with factory or aftermarket amplification Designed for long-term reliability and consistent sound quality Technical Specifications Product Type 2-Way Component Speaker Kit Woofer Size 165mm (6.5") Cone Material Slatefiber Tweeter Type Aluminium/Magnesium Inverted Dome Voice Coil Diameter 25mm Frequency Response 60Hz – 21kHz Sensitivity 91dB Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Power Handling 160W Tweeter Level Adjustment -3dB / 0dB / +3dB Crossover Type Separable Motor Type Ferrite Surround Material Butyl Mounting Depth 70mm Cut-Out Diameter 165mm What's Included 2 x Focal 165 SF 165mm Slatefiber Woofers 2 x Aluminium/Magnesium Inverted Dome Tweeters 2 x Separable Crossovers Protective Speaker Grilles Mounting Brackets Installation Screws Installation Accessories Why Choose Focal Slatefiber? Focal’s Slatefiber technology combines recycled carbon fibres with advanced thermoplastic materials to create a cone that is lightweight, rigid and highly controlled. The result is exceptional sound accuracy, improved detail retrieval and a more natural listening experience compared to conventional speaker materials. Designed and manufactured in France, the Focal 165 SF is an ideal upgrade for drivers seeking premium sound quality, enhanced musical detail and long-lasting performance from their vehicle’s audio system.

Focal C 165 SF Slatefiber 6.5" 2-Way Component Speakers The Focal C 165 SF is a premium 6.5-inch (165mm) 2-way component speaker system designed to deliver exceptional clarity, detailed midrange reproduction and dynamic performance for discerning car audio enthusiasts. Featuring Focal’s innovative Slatefiber cone technology, the C 165 SF combines rigidity, lightweight construction and excellent damping characteristics to produce a natural, balanced and highly detailed listening experience. Manufactured in France, the Slatefiber cone uses recycled carbon fibres blended with thermoplastic polymer to achieve outstanding acoustic performance while maintaining low distortion and excellent responsiveness. Combined with Focal’s advanced motor design and butyl rubber surround, the speaker delivers accurate vocals, powerful midbass and impressive overall musicality. With 80W RMS power handling, 160W maximum power, 89.4dB sensitivity and a wide frequency response extending from 60Hz to 21kHz, the C 165 SF offers impressive efficiency and performance across a broad range of music styles. The compact design allows seamless integration into factory and aftermarket installations while maintaining Focal’s renowned sound quality. Key Features Premium 6.5" (165mm) 2-way component speaker system French-made Slatefiber cone technology Natural and highly detailed sound reproduction 80W RMS power handling 160W maximum program power 4 Ohm impedance Wide 60Hz – 21kHz frequency response 89.4dB sensitivity for efficient performance Ferrite motor structure Butyl rubber surround for durability and stability Excellent midbass impact and vocal clarity Ideal for factory audio upgrades and premium custom systems Performance Benefits Exceptional clarity and natural tonal balance Detailed vocal reproduction and precise imaging Strong midbass response with low distortion High sensitivity for improved output from factory or aftermarket amplifiers Designed for accurate and engaging musical performance Technical Specifications Speaker Type 2-Way Component Speaker System Nominal Diameter 6.5" (165mm) Cone Material Slatefiber Frequency Response 60Hz – 21kHz Sensitivity 89.4dB (1W/1m) Nominal Impedance 4 Ohm RMS Power Handling 80W Maximum Program Power 160W Resonance Frequency (Fs) 67Hz Total Q Factor (Qts) 0.58 Linear Excursion (Xmax) ±4mm Voice Coil Diameter 25mm Voice Coil Former Kapton Voice Coil Material Copper Magnet Material Ferrite Effective Cone Area (Sd) 132cm² Equivalent Compliance Volume (Vas) 11.8L Mounting Depth 70mm Cut-Out Diameter 144mm Overall Diameter 165mm Overall Depth 81mm Net Weight 1.05kg Why Choose Focal Slatefiber? Focal’s Slatefiber technology delivers a unique combination of rigidity, lightness and damping that allows the speaker to reproduce music with outstanding precision and realism. The result is cleaner vocals, tighter bass response and a more immersive listening experience compared to conventional speaker materials. Designed and manufactured in France, the Focal C 165 SF is an excellent upgrade for drivers seeking premium sound quality, improved detail and long-term reliability from their vehicle’s audio system.

Focal 65 SF 65mm Slatefiber Midrange Speaker The Focal 65 SF is a premium 65mm midrange speaker designed to deliver exceptional vocal clarity, accurate detail and dynamic sound performance in high-quality car audio systems. Featuring Focal’s innovative French-made Slatefiber cone technology, the 65 SF combines rigidity, lightweight construction and controlled damping to reproduce midrange frequencies with remarkable balance and precision. Its compact size makes it ideal for factory speaker replacements, custom audio installations and multi-speaker system upgrades where installation space is limited. Whether used as part of a complete sound system or a dedicated midrange solution, the Focal 65 SF helps create a wider, more natural and immersive in-car soundstage. Engineered with a powerful neodymium motor and durable butyl surround, the 65 SF maintains excellent control and stability even at higher listening levels. With 40W RMS power handling, 80W maximum power and a frequency response of 250Hz to 11kHz, it integrates seamlessly into premium audio systems requiring detailed and accurate midrange reproduction. Key Features 65mm compact midrange speaker French-made Focal Slatefiber cone technology Clear, detailed and natural midrange reproduction 40W RMS power handling 80W maximum power handling 4 Ohm impedance 250Hz – 11kHz frequency response Durable butyl surround for stability and longevity Neodymium motor for high performance in a compact design Ideal for premium car audio upgrades and custom installations Supplied with mounting brackets and installation screws Performance Benefits Enhanced vocal clarity and midrange detail Accurate sound reproduction with low distortion Compact design for flexible installation options Excellent integration into active and passive audio systems Designed for high-end sound quality applications Specifications Product Type Midrange Speaker Speaker Size 65mm Cone Material Slatefiber Voice Coil Diameter 25mm Frequency Response 250Hz – 11kHz Impedance 4 Ohm RMS Power 40W Maximum Power 80W Sensitivity 87dB Motor Type Neodymium Surround Material Butyl Mounting Depth 34.8mm What's Included 1 x Focal 65 SF 65mm Slatefiber Midrange Speaker Mounting brackets Installation screws Designed and manufactured using Focal's renowned acoustic expertise, the 65 SF delivers precise and engaging midrange performance for enthusiasts seeking greater clarity, realism and balance from their vehicle's audio system.

Alpine BRV-S40C BassRev 4" 2-Way Component Speakers with HEDGE Surround Technology Experience premium sound quality from a compact speaker upgrade with the Alpine BRV-S40C BassRev 4" 2-Way Component Speaker System. Designed using Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology that delivers enhanced bass performance while preserving the exceptional clarity, detail, and accuracy that Alpine is known for. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S40C produces rich sound with surprising low-frequency performance from a compact speaker format. Ideal for factory speaker replacement applications, these speakers offer a significant upgrade in overall audio quality and listening enjoyment. Key Features 4" (125mm) 2-Way Component Speaker System designed for superior audio performance in compact installations. Exclusive HEDGE Surround Technology increases cone excursion for enhanced bass response. Lightweight Polypropylene Woofer Cone provides rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth and detailed high-frequency reproduction. Large 75mm Strontium Ferrite Magnet Structure improves efficiency and speaker control. 25mm Woofer Voice Coil supports improved power handling and dynamic output. High-Quality Audio-Grade Tweeter Crossover Network for seamless frequency integration. Neodymium Tweeter Magnets ensure precise and articulate treble response. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise speaker excursion while maintaining precise control. The BRV-S40C can achieve up to 20mm of maximum linear excursion, delivering impressive bass performance within the critical 67Hz–120Hz range. This advanced surround design enables deeper bass output, improved punch, and greater sound pressure levels compared to conventional factory speakers, creating a fuller and more engaging listening experience. Lightweight Polypropylene Woofer Cone The BRV-S40C features a specially engineered polypropylene woofer cone that combines lightweight construction with excellent rigidity. This design effectively resists unwanted resonance and vibration, allowing the speaker to maintain clean, balanced sound reproduction even at higher volume levels. The result is improved bass accuracy, enhanced midrange clarity, and lower distortion across the entire frequency range. Large Magnet Structure for Increased Output Built with a large 75mm Strontium Ferrite magnet and oversized 25mm voice coil, the BRV-S40C is designed to maximise speaker control and efficiency. This powerful motor structure works together with Alpine’s HEDGE surround technology to deliver stronger bass response, increased output capability, and greater overall sound performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with exceptional precision. Featuring lightweight polyester diaphragms and powerful Neodymium magnets, the tweeters deliver smooth, natural, and highly detailed high-frequency reproduction. Enjoy wider sound staging, improved imaging, and enhanced musical detail without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S40C tweeters feature removable housings and trim rings that allow compact installation into many factory tweeter locations. Suitable mounting positions include: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexible design allows installers to maintain a factory-style appearance with minimal modification while achieving optimal sound performance. OPTIM™Sync Technology Compatibility The BRV-S40C is compatible with Alpine’s advanced OPTIM™Sync processing when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock deeper bass extension, improved tonal balance, and enhanced overall audio performance. Technical Specifications Model Alpine BRV-S40C Speaker Type 2-Way Component Speaker System Woofer Size 4" (125mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 25mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 75mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 120 Watts RMS Power Handling 40 Watts RMS (CTA-2031 Compliant) Frequency Response 75Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 40W RMS Per Channel Woofer Dimensions Frame Diameter 10.08 cm Cut-Out Diameter 9.5 cm Mounting Depth 4.49 cm Mounting Height 0.69 cm Magnet Diameter 7.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S40C 4" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S40C? Advanced HEDGE surround technology for enhanced bass performance Premium polypropylene woofer cone for accurate sound reproduction Large magnet structure and 25mm voice coil for improved output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design Compatible with Alpine OPTIM™Sync DSP tuning technology Excellent factory speaker replacement solution Legendary Alpine sound quality and reliability The Alpine BRV-S40C BassRev 4" Component Speaker System delivers impressive bass, exceptional clarity, and detailed high-frequency performance in a compact package, making it the perfect upgrade for drivers seeking premium sound quality from factory speaker locations.

Alpine BRV-S40C BassRev 4" 2-Way Component Speakers with HEDGE Surround Technology Experience premium sound quality from a compact speaker upgrade with the Alpine BRV-S40C BassRev 4" 2-Way Component Speaker System. Designed using Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology that delivers enhanced bass performance while preserving the exceptional clarity, detail, and accuracy that Alpine is known for. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S40C produces rich sound with surprising low-frequency performance from a compact speaker format. Ideal for factory speaker replacement applications, these speakers offer a significant upgrade in overall audio quality and listening enjoyment. Key Features 4" (125mm) 2-Way Component Speaker System designed for superior audio performance in compact installations. Exclusive HEDGE Surround Technology increases cone excursion for enhanced bass response. Lightweight Polypropylene Woofer Cone provides rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth and detailed high-frequency reproduction. Large 75mm Strontium Ferrite Magnet Structure improves efficiency and speaker control. 25mm Woofer Voice Coil supports improved power handling and dynamic output. High-Quality Audio-Grade Tweeter Crossover Network for seamless frequency integration. Neodymium Tweeter Magnets ensure precise and articulate treble response. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise speaker excursion while maintaining precise control. The BRV-S40C can achieve up to 20mm of maximum linear excursion, delivering impressive bass performance within the critical 67Hz–120Hz range. This advanced surround design enables deeper bass output, improved punch, and greater sound pressure levels compared to conventional factory speakers, creating a fuller and more engaging listening experience. Lightweight Polypropylene Woofer Cone The BRV-S40C features a specially engineered polypropylene woofer cone that combines lightweight construction with excellent rigidity. This design effectively resists unwanted resonance and vibration, allowing the speaker to maintain clean, balanced sound reproduction even at higher volume levels. The result is improved bass accuracy, enhanced midrange clarity, and lower distortion across the entire frequency range. Large Magnet Structure for Increased Output Built with a large 75mm Strontium Ferrite magnet and oversized 25mm voice coil, the BRV-S40C is designed to maximise speaker control and efficiency. This powerful motor structure works together with Alpine’s HEDGE surround technology to deliver stronger bass response, increased output capability, and greater overall sound performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with exceptional precision. Featuring lightweight polyester diaphragms and powerful Neodymium magnets, the tweeters deliver smooth, natural, and highly detailed high-frequency reproduction. Enjoy wider sound staging, improved imaging, and enhanced musical detail without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S40C tweeters feature removable housings and trim rings that allow compact installation into many factory tweeter locations. Suitable mounting positions include: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexible design allows installers to maintain a factory-style appearance with minimal modification while achieving optimal sound performance. OPTIM™Sync Technology Compatibility The BRV-S40C is compatible with Alpine’s advanced OPTIM™Sync processing when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock deeper bass extension, improved tonal balance, and enhanced overall audio performance. Technical Specifications Model Alpine BRV-S40C Speaker Type 2-Way Component Speaker System Woofer Size 4" (125mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 25mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 75mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 120 Watts RMS Power Handling 40 Watts RMS (CTA-2031 Compliant) Frequency Response 75Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 40W RMS Per Channel Woofer Dimensions Frame Diameter 10.08 cm Cut-Out Diameter 9.5 cm Mounting Depth 4.49 cm Mounting Height 0.69 cm Magnet Diameter 7.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S40C 4" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S40C? Advanced HEDGE surround technology for enhanced bass performance Premium polypropylene woofer cone for accurate sound reproduction Large magnet structure and 25mm voice coil for improved output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design Compatible with Alpine OPTIM™Sync DSP tuning technology Excellent factory speaker replacement solution Legendary Alpine sound quality and reliability The Alpine BRV-S40C BassRev 4" Component Speaker System delivers impressive bass, exceptional clarity, and detailed high-frequency performance in a compact package, making it the perfect upgrade for drivers seeking premium sound quality from factory speaker locations.