Front Runner
FRONT RUNNER Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount - KRLD024
$531.00
$590.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 225mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
Features
KRLD024 - Land Rover Defender (1983-2016) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS107 - No 7 Leg 225mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 130mm (5")
Length 1540mm (61")
Height 195mm (8")
Shipping Weight:
Weight 9.5kg (21.0lbs)
Front Runner
FRONT RUNNER Load Bed Cargo Slide / Large - SSBS009
$2,654.10
$2,949.00
Say goodbye to crawling into the back of your truck every time you need to reach your gear. Removing your tools, gear and boxes becomes easier, quicker and safer with a Front Runner Cargo Slide.
Hold open feature prevents the slide from closing when on uneven surfaces.
Push to close dual latching lock securely keeps the unit closed and rattle-free.
Load Rating: 250kg / 551.2 lbs.
Designed for the worlds toughest roads.
The flat drawer contains multiple tie down points and three cargo attachment channels for securing gear with the Stratchits or other style straps.
High strength, sealed bearings allows the tray to extend nearly 100% from the anchored base.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
Mounts to flat surfaces. Depending on application, drilling into vehicle may be required.
Designed for interior use only with a canopy, camper shell, or other style load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
Note: This cargo slide will only fit certain sized pickup truck load beds and vehicle cargo holds. Please see SPECS for exact product measurements and to determine if this product is the right fit. All vehicles with optional bed liners must check internal measurements.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Features
Consists of:
1 x Cargo Drawer unit
3 x Accessory channels
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Carpeted & Laminated plywood
Product Dimensions:
Closed:
1800mm (70.9") L x 1125mm (44.3") W x 112mm (4.4") H
Open:
3200mm (126") L x 1125mm (44.3") W x 112mm (4.4") H
Inner Tray Dimensions:
1786mm (70.3") L x 940mm (37") W x 50mm (2") H
Width needed between load bed wheel arches: 1022mm (40.2")
Weight:
67.2kg (148.2lbs)
Load Rating:
250kg (551.2lbs)
Front Runner
FRONT RUNNER Load Bed Cargo Slide Drop Down Table Kit - TBRA058
$517.50
$575.00
An essential accessory to add to your Front Runner Expander Camping Chair*.
Creates a foldable table on either side of the Expander Chair.
Secures to the frame of the Expander Chair's seat and hooks on the armrest to place your belongings.
Ideal for camping, sports events, the beach, and any other activities.
Once secured the table top folds up with the chair and can be stored together in the Expander Chair Storage Bag .
Features an integrated cut-out to place a glass/wine glass conveniently next to your chair at an easy-to-reach height.
Made from aluminum and high-strength steel and sealed in the same weather-resistant finish as all Front Runner racks.
* The Front Runner Expander Camping Chair is not included and must be purchased separately.
Features
Consists of:
1 x Side Table Top
1 x Table Hinge
1 x Strap
1 x Table Hook
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated aluminium
Black Powder coated high strength steel
Product Dimensions:
190mm (7.5") L x 267mm (11.7") W
Weight:
0.48kg (1.1 lbs)
Front Runner
FRONT RUNNER Mercedes-Benz Sprinter (L3H2/170In Lwb/High Roof) (2007-Current) Slimpro Van Rack Kit - KVMS004T
$2,581.20
$2,868.00
Compatible with Mercedes Benz Sprinter (L3H2/170" LWB) (2007-Current) high roof vans with a vehicle length of 6967mm / 274.3".
Load-carrying area: 4130mm (162.6") x 1352mm (53.2").
Fourteen (14) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS004T - Mercedes Benz Sprinter (L3H2/170" LWB/High Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
7x FAVF004 - Mercedes Sprinter Van Rack Foot Set
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
5x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
4130mm (162.6") L x 1352mm (53.2") W x 143mm (5.6") H
Approximate Installed Weight: 18.39kg (40.54lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 47kg (103lbs)
Front Runner
FRONT RUNNER Mercedes-Benz Sprinter Ladder - LAMS002
$468.90
$521.00
Secures to the rear of the Mercedes/Dodge/Freightliner Sprinter and LDV/Maxus Deliver 9 vans.
Simply mounts to the factory door hinges and door face with minimal modification to the vehicle.
Made from high strength steel and powder coated in the same durable black powder coating as all Front Runner racks.
Steps have rubber inserts for added grip when reaching on top of the Sprinter vans roof rack.
Install or remove effortlessly.
Note: Suitable for all low roof, high roof and super high roof vans.
NOTE: *Does not work with 270 Degree opening rear doors.
Features
Consists of:
1 x Mercedes Sprinter / LDV/Maxus Deliver 9 Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
239mm (9.4") L x 413mm (16.3") W x 1645mm (64.8") H
Weight:
7.9kg (17.4lbs)
Front Runner
FRONT RUNNER Quick Release Tent Mount Kit / 6 Piece - TBMK021
$278.10
$309.00
Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent.
Simply release the tabs on the 6 latches and lift the tent away in seconds.
No more wrenching in tight spaces during the off-season or time-consuming weekday removal of a roof top tent.
This strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks.
Compatible with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc*.
Compatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below.
6 low profile base brackets are bolted to a Front Runner Rack while 6 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set.
Secures in place with 6 latches with safety catches. Can be locked using Rack Accessory Lock / Small combination cable lock.
Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available.
No tent modification is required.
Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
Supplied with all required mounting hardware.
Fitting instructions are included.
James Baroud Quick Release Tent Channel Set / 6 Piece or Autohome Quick Release Tent Channel Set / 6 Piece may be required for other tent brands (sold separately).
*Soft shell and hard shell tents may need additional Nut Plates, sold separately.
**IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent.
Note: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support.
Features
Consists of:
6 x Quick Release Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
304 Stainless steel
Product Dimensions: (Per assembled bracket)
131mm (5.2") L x 142mm (5.6") W x 60mm (2.4") H
Weight:
9.9kg (21.8lbs)
Front Runner
FRONT RUNNER Rack Accessory Lock / Small - RRAC134
$18.90
$21.00
No keys needed.
Easily set your own combo.
Locks Front Runner Rack accessories for holding gear like Tables, Water Tanks, Hi-Lift Jacks, Axes, Wolf Packs and more.
Works with Hi-Lift Jack Bracket, Universal Water Tank Tap, Axe Bracket, Cub Pack Rack Bracket, Wolf Pack Rack Bracket, Lockable Strap For Water Cap / 42L.
Stainless steel rubber coated cable and corrosion resistant tumbler for years of worry-free security.
*Note: Rack accessories are sold separately.
Features
Consists of:
1 x 3-Digit Combination Cable Lock
Materials used:
Casing: Zinc Alloy
Inner Core: Zinc Alloy
Cable: Stainless steel wire with PVC coating
Product Dimensions:
87mm (3.4") L x 30mm (1.2") W x 39mm (1.5") H
Cable Length:
100mm (3.9")
Cable Width:
2.8mm (0.1")
Weight:
30g (17oz)
Front Runner
FRONT RUNNER Rack Pad Set - RRAC125
$85.50
$95.00
Dont risk your expensive and fragile cargo on unpadded bars. Protect against dings and scratches so you can adventure worry free.
Quickly attach or remove the pads with the heavy-duty Velcro closure system.
Pads secure around any standard Rack Slat or Load Bar.
For use at the front or rear on the Combined Slat of a Front Runner Rack, secure the pads using Black Tie Down Rings / Eye Nuts - SOLD SEPARATELY.
Use Stratchits or other tie down straps to quickly and easily tie-down your gear. Stratchits are SOLD SEPARATELY.
Firm foam for long-lasting reliability.
Wide 24 inch / 61 cm pads for a range of uses and extra protection.
Made with water resistant and durable outdoor grade fabrics.
Set of 2 comes with nylon mesh bag for neat organization when not in use.
Can adjust to fit many other factory racks and load bars.
Note: This product is not compatible with Slimsport rack kit range.
Features
Consists of:
2 x Rack pads
1 x Carry bag
Materials used:
Black canvas - outer shell & lining
EPE (Expandable Polyethylene) foam pads
Mesh - bag
Product Dimensions:
610mm (24") L x 90mm (3.5") W x 75mm (3") H (Single Pad)
Weight:
400g (14.1oz)
Front Runner
FRONT RUNNER Slat To Load Bar Conversion End Cap Kit - RRAC044
$25.20
$28.00
Convert any size slat to a load bar with these plastic end caps.
Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat.
Just pop them on and your slat to load bar "conversion" is complete!
Supplied in sets of (4) four.
Features
Consists of:
4x Load Bar End-caps
Material used:
Plastic - Polypropylene
Product Dimensions:
91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H
Weight:
80g (2.8oz)
Front Runner
FRONT RUNNER Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - By - RRAC182
$42.30
$47.00
A pair of brackets that secure to the slats of your Front Runner Slimsport or Slimpro Van Rack.
Mounts Front Runner side mount accessories such as:
Quick Release Awning Mount Kit
Ratcheting Spade/Shovel & Paddle Mount
Installs in the T-slots of the Slimsport or Slimpro Van Rack and can be inversed to allow for standard or lower mount depending on roof clearance.
Made from black powder coated 6063 T6 aluminum to match your rack accessories.
Supplied with installation hardware and fitting instructions.
Note: This product is only compatible with the Front Runner Slimsport and Slimpro Van Rack Kits.
Features
Consists of:
1 x Pair of Rack Accessory Mounting Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminum
Product Dimensions:
101mm (4") L x 60mm (2.4") W x 50mm (2") H (Per Single Bracket)
Weight:
0.37kg (0.8lbs)
Front Runner
FRONT RUNNER Spade/Shovel With Axe Edge - REQU049
$51.00
$57.00
Spade/Shovel with Axe Edge
Product Dimensions:L 760MM x W 210MM x H 60MM
Weight:1.5kGSpecial Notes SKU; FG00556
Front Runner
FRONT RUNNER Spare Wheel Clamp / Low Profile - SWCL004
$76.50
$85.00
This Front Runner Spare Wheel Clamp is designed to hold your spare wheel to a Front Runner Roof Rack or Front Runner Load Bar set.
Mounts across 2 slats and can handle mostly any size wheel.
Specifically mounts a raised dish rim with the hollow side facing up.
Tightens down to the back side of the wheel to protect your wheel finish, and can accommodate even the deepest offsets.
Features
Consists of:
1x Rack Bracket
1x Clamp Bracket
1x Mounting Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
263mm (10.4") L x 55mm (2.2") W x 242mm (9.5") H
Weight:
1.5kg (3.3lbs)
Front Runner
FRONT RUNNER Strap Ratchet 25 X 2.5M W/ Hooks - STRA014
$26.10
$29.00
Strap Ratchet 25 X 2.5M W/ Hooks
Front Runner
FRONT RUNNER T-Slot Rubber Beading - RRAC013
$17.10
$19.00
Need a little extra insulation between your rack and gear?
The Front Runner T-Slot Rubber Beading slides easily into your Front Runner rack t-slots for extra grip and cushioning. It reduces rattles and is great for storage boxes, firewood, or any other item that you want to insulate from your rack. Comes in 1.5m (5') lengths.
On some vehicles with sun roofs, installing the t-slot beading on the front slats may help lessen wind noise.
Features
Consists of:
1.5m (5') Length of beading
Materials used:
Ethylene propylene diene monomer (M-class) all weather rubber
Weight:
0.1kg (0.3lbs)
Front Runner
FRONT RUNNER Tent Ladder - TENT025
$106.20
$118.00
A 7 (seven) step replacement ladder for your Roof Top Tent incase the original ladder gets damaged or lost.
Retractable, for easy storage.
Made from sturdy aluminium.
Foot friendly steps.
Weight limit: 180kg/400Lbs.
NOTE: Should the tent install height be higher than 2 meters you will need a Tent Extension Ladder.
Features
Materials used:
Extruded aluminium
Stainless steel
Nylon-6
Product Dimensions:
1150mm (45.3") L x 350mm (13.8") W x 90mm (3.5") H
Open Dimensions:
2055mm (80.9") L x 350mm (13.8") W x 90mm (3.5") H
Front Runner
FRONT RUNNER Universal Side Mount For Pro Water Tank / 20L - VACC099
$167.40
$186.00
Install this mount onto a flat surface to allow quick and easy access to your 20L Pro Water Tank (WTAN060).
Easily removable by loosening the stainless-steel eye nuts.
The water tank can be locked for added peace of mind using the Front Runner Accessory Lock (RRAC134) (sold separately).
Plastic alignment spacers protect, align and secure your water tank.
The bracket is made from steel and sealed with the same weather-resistant black powder coating as Front Runner racks.
All installation hardware included.
Features
Consists of:
1 x Universal Side Mount for Pro Water Tank / 20L
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
211mm (8.3") L x 341mm (13.4") W x 237mm (9.3") H
Weight:
2.06kg (4.5lbs)
Front Runner
FRONT RUNNER Universal Track / 1800Mm(L) - TRAC003
$242.10
$269.00
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the t-slotted track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
Made from t-slotted aluminum extrusion.
Often used for trailers and canopies to mount a rack or load bars.
Each track is supplied with fitted double sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
Powder coated black.
Comes in pairs.
Features
TRAC003 - Universal Track / 1800mm(L) - by Front Runner
Consisting of:
1 x TRAC003 - Universal Track / 1800mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
Approximate Installed Weight 3kg (8lbs)
Shipping Dimensions:
Width 110mm (4")
Length 1880mm (74")
Height 110mm (4")
Shipping Weight:
Weight 4.0kg (8.9lbs)
Front Runner
FRONT RUNNER Jeep Wrangler Jl 4 Door (2018-Current) Extreme Slimline Ii Roof Rack Kit - KRJW036T
$3,047.40
$3,386.00
The JL Extreme mounting system bolts to existing mounting points on the chassis and roll cage. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place. The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails allow for a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table) to be fitted.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
*Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide.
NOTE: This Kit cannot be used together with the soft top roof or Sky One-Touch Power top.
Note: This is not suitable for the Mojave Edition of the Jeep Gladiator.
Features
KRJW036T - Jeep Wrangler JL 4 Door (2018-Current) Extreme Slimline II Roof Rack Kit
Consisting of:
1x FAJL002 - Jeep Wrangler JL (2018-Curr) Foot Rails
1x FAJL003 - Jeep Wrangler JL (2018-Curr) Inner Brackets
1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount
1x RRSTJ12 - SLII Tray - 1425mm(W)X2368mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 46.14kg (101.72lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 440mm (17")
Shipping Weight:
Weight: 54kg (119lbs)
Front Runner
FRONT RUNNER Jeep Wrangler Jku 4-Door Cargo Storage Interior Rack - VACC021
$836.00
$929.00
If you own a 4 door Jeep JKU and curse the awkward arrangement of storage space in rear cargo area... you are not alone. The Front Runner JKU SLII Interior Rack is the most versatile storage solution because it adds more usable space AND make it easier to organize, secure and access your gear. Front Runner has taken the best features of the Slimline II Roof Rack and created a completely flat tray designed specifically for inside the Jeep Wrangler JKU - 4 dr.
Greatly expand your rear cargo storage space.
Should be used with either the hard top, soft top, or no top at all!
The easy, no drill installation utilizes the existing hard top mounting points.
Built for off-road use with on-road sophistication.
Includes all the features that make the Slimline II one of the most versatile and durable racks available.
Secure cargo rattle free to the top or bottom of the rack with the bolt on t-slots and outer rail.
Includes Front Runners rubber t-slot beading for silent and slide free cargo carrying.
SECURE AND SAFE STORAGE. Whether you roll with a soft top, or no top at all, you can bolt your accessories to the rack and store your gear safely in the cargo area beneath rack.
This is the only interior jeep storage rack available that is designed to fit a standard sized vehicle refrigerator underneath. (For easy fridge access, see our Front Runner Fridge Slides, or our brand new Front Runner JKU Cargo Slide.)
Use along with the Front Runner JKU Extreme Roof Rack for massive storage options.
Use in conjunction with the Front Runner JKU Extreme Roof Rack AND the all new Front Runner Jeep JKU Cargo Slide and you can offer your Jeep as a location for the next season of Storage Wars.
Use the Front Runner Eye nuts and Stratchits (or other cargo straps or bunjee cords) for a quick, versatile way to secure cargo. (Eye Nuts and Stratchits Sold Separately).
For extreme off-road use you might want to consider using the Adjustable Rack Cargo Chocks along with the Stratchits for securing heavier items like water tanks, cargo boxes, jerry cans, stoves, chairs, etc. (Corner Brackets and Stratchits Sold Separately).
Features
Material used:
Brackets: high strength steel and black powder coated
Slats: Black powder coated aluminium
Product Dimensions:
W 1475mm (58.1") x D 550mm (21.7") x H 50mm (1.96")
Weight:
25.54kg (56.31lbs)
Front Runner
FRONT RUNNER Bbq/Fire Pit - VACC087
$328.50
$365.00
Camp cooking just got even more portable with this BBQ/Fire Pit that keeps the flame off the ground for safe grilling anywhere. Packs flat to save precious cargo room and transport easily and packs neatly in Wolf Pack Pro*.
A BBQ/Fire Pit that is designed to pack flat at 1.5 inches / 38mm thick.
Features a large grill surface area.
Sturdy base for safe grilling.
Quick and easy 30-second setup.
Sides of grill serve as a wind-break.
Safely contains your fire and keeps the fire elevated off the ground.
Constructed from durable 3CR12 stainless steel, providing high rust and corrosion resistance.
Supplied with gird lifting tools.
Stores neatly in Wolf Pack Pro*.
*Note: The Wolf Pack Pro is sold separately
Consists of:1 x BBQ/Fire Pit Assembly1 x Ember Tray/Griddle2 x Grid2 x Grid Lifting ToolsFitting & Assembly Instructions
Materials used:3CR12 Steel
Product Dimensions:Open Dimensions:436mm (17.2") L x 436mm (17.2") W x 310mm (12.2") H
Close Dimensions:415mm (16.3") L x 310mm (12.2") W x 38mm (1.5") H
Weight:7.9kg (17.4lbs)
Front Runner
FRONT RUNNER Aluminium Telescopic Ladder / 2.9M - LADD008
$232.20
$258.00
A telescopic ladder that effortlessly expands into a 2.9m, nine (9) step ladder to reach the top your vehicle to load goods and equipment onto the Roof Rack.
A telescopic ladder that effortlessly expands into a 2.9m, nine (9) step ladder to reach the top your vehicle to load goods and equipment onto the Roof Rack.
Made of Aluminium 6063/T5.
Folds down and locks in place with each step section.
Expands in one smooth motion.
Velcro nylon strap keeps ladder in place when closed.
Compact and sturdy.
Can be used in conjunction with the Telescopic Ladder Support Bracket / Slimline II Rack to securely stand against the Slimline II Roof Rack when in use.
Stores neatly in its own storage bag.
Consists of:1 x Telescopic Ladder1 x Storage bag
Materials used:Aluminium 6063/T5
Product Dimensions:Use height:290cm
Fold height: 78cm
Fold width: 46cm
Fold depth: 7.2cmProfile Diameter: 32 - 60mm
Cushion Thickness: 2.6cm
Rung Distance: 29.5cm
Rung Size: 4×2.79cm
Max loading:150kg
Weight:GW/NW:9.8kg/8.7kg
Front Runner
FRONT RUNNER 40In Led Light Bar Vx1000-Cb Sm / 12V/24V - RRAC265
$711.00
$790.00
A 40” LED Light Bar featuring 36 intense, high-performance LEDs, with OSRAM technology, that reaches a distance of 525m and delivers 6000 lumens. The 5700 Kelvin, light intensity is distributed as a combo beam pattern- near and far-field illumination. The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
To accommodate its wide range of uses, the searchlight is equipped with a durable polycarbonate lens. The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan. Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
Individual installation is possible due to the VX1000-CB SM's double ECE certification. The 12V/24V LED light bar is ECE-compliant and versatile in application and is not limited to automotive use only. Special regulations and legislation within each country should be taken into consideration before use. Secures to your Front Runner Roof Rack with supplied RRAC217.
Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions
Materials used:Black powder coated steel and aluminium mounting brackets
Product Dimensions:Light Bar:1031mm (40.6") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with Bracket:1070mm (42.1") L x 102mm (4") W x 58mm (2.3") H
Weight:5.56kg (12.3lbs)
Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)
Front Runner
FRONT RUNNER Land Rover Defender (1983-2016) Side Mount Jerry Can Holder - JCHO017
$305.10
$339.00
The same trusted and off-rough tough Front Runner lockable Jerry Can Holder, only conveniently reconfigured to mount on the side of the vehicle via a gutter mount.
The adjustable stainless steel latch with safety catch holds your Jerry Can firmly in place over a lifetime of off-road abuse.
For use with 20l / 5.3 gallon NATO/Wedco style military cans.
This strap covers the Jerry can cap. Add your own padlock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.
Simple installation that uses an existing pop-rivet hole.
Made of durable black powder coated high strength steel and designed to mount to the rain gutter on vehicles like the classic Land Rovers.
Note: Will not work with Scepter style cans.Note: This Jerry Can Holder is not compatible with the Land Rover New Defender.
Consists of:1 x Side Mount Jerry Can HolderInstallation HardwareFitting Instruction
Materials used:Black powder coated high strength steel
Product Dimensions:230mm (9.1") L x 385mm (15.2") W x 711mm (28") H
Weight:5.5kg (12.1lbs)
Front Runner
FRONT RUNNER Land Rover Defender (1983-2016) Gullwing Window / Aluminium- - GWLD009
$1,259.10
$1,399.00
The Front Runner Gullwing window replaces the rear window of a Land Rover Defender allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Aluminum Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle.
Fits in minutes, no modifications required.
Sealed with the same durable, weather resistant powder coating as the Front Runner Slimline II Roof Rack.
Includes 2 locking latches.
The Land Rover Defender can be brought back to stock within minutes by removing and replacing with standard window.
Note: The glass and aluminium panels for the Land Rover Defender are not interchangeable.
Consists of:1x Aluminium gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:Black powder-coated 3mm aluminiumBlack powder-coated 2mm mild steel reinforcement plateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1") x W 50mm (2") x H 490mm (19.3")Door Panel: L 1044mm (41.1") x H 414mm (16.3")Weight:15.5kg (34.2lbs)
Direction-Plus
DIRECTION-PLUS Transchill Dual Transmission Cooler Kit Mitsubishi Triton Mq & Mr () - TCD629DPK
$575.10
$639.00
The TransChill Transmission cooler kit TCD629DPK fits Mitsubishi Triton MQ/MR 4N15 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
100% pressure tested at 150psi for quality assurance
33% more efficient than a comparable tube and fin design
Pre-drilled mounting plates for easy installation
Internal tubulation for efficient heat transfer
3/8” (9 mm) push-on fittings for quick and easy installation
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
By installing a dual cooler kit you will have a higher cooling capacity than the single cooler kit TC629DPK.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig 23 row oil cooler (SINGLE COOLER KIT) or 2x Davies Craig 23 row oil cooler (DOUBLE COOLER KIT)
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS Transchill Transmission Cooler Kit Ford Ranger, Everest Pxiii Bi-Turbo () - TCB663DPK
$704.70
$783.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB663DPK fits Ford Ranger, Everest PXIII Bi-Turbo YNWS (2.0L 4cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS Transchill Transmission Cooler Kit Toyota Hilux N80 () - TCB628DPK
$496.80
$552.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB628DPK fits Toyota Hilux & Fortuner 1GD-FTV (2.8L 4cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Isuzu D-Max & Mu-X () - TCB601DPK
$496.80
$552.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB601DPK fits Isuzu D-Max and MU-X 4JJ1TCX (3.0L 4cyl) 2012 – 2020 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Polyair
POLYAIR Standard Ultimate Airbag Kit, Nissan Patrol - 92094ULT
$432.00
$480.00
The Polyair Bellows Ultimate load assist kits are specifically designed to suit big American SUV’s and 4WD’s. With an internal bump stop to help absorb shock, even with zero air pressure, it provides a 3 stage ride comfort.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows Ultimate.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Internal bump stop
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
To Suit:
Nissan Patrol
Polyair
POLYAIR Standard Bellows Ultimate Airbag Kit, Ford Ranger Raptor - 89416ULT
$1,345.50
$1,495.00
POLYAIR 'ULTIMATE' BELLOWS # 89416ULT LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit FORD RANGER 'RAPTOR' SERIES 2 - STANDARD HEIGHT ONLY.
NOTE: FOR 08/2022 Onward Models NEXT GEN. RAPTORS ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY.
This Kit suits ALL O.E.M. STANDARD HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR RAISED HEIGHT RAPTORS
*** NOTE: NOT SUITABLE FOR LEAF SPRING REAR NEXT GEN RANGER UTES or 1ST GEN. RAPTOR MODELS !
This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself.
As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required.
Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an off road vehicle.
The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain.
This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design.
NO DRILLING OR MODIFICATIONS REQUIREDSUPER EASY TO INSTALLDOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / FULL EXTENSION.THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...2 YEAR WARRANTYFREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!
Polyair
POLYAIR 3" Lift Ultimate Airbag Kit, Toyota Landcruiser - 15095TULT
$387.00
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Landcruiser 80 Series, Toyota - Landcruiser 100 series IFS, Toyota - Landcruiser 200 Series
Polyair
POLYAIR 2" Lift Red Series Airbag Kit, Land Rover Defender - 95095
$364.50
$405.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Landrover - Defender 110 1983 - 2016
Polyair
POLYAIR 2" Lift Bellows Airbag Kit, Isuzu D-Max - 85105R
$765.00
$850.00
The Polyair Bellows load assist kits are specifically designed to suit leaf sprung vehicles.When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows.The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-100psi- Built with a superior 2-ply fabric reinforced rubber- Ultra high strength & corrosion proof Zytel ® Nylon end caps- Most popular kits do not require drilling into the chassis- Easy to install with illustrated instructions- Quick connecting, easy to use air fittings.- Kits designed for standard height and raised applications- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Great Wall - V200 / V240, 2009 - 2013, 4WD
Holden - Colorado RC 2008 - 2012, 4WD,Holden - Colorado RG,Holden - Colorado 2012-on - 2WD LOW RIDE ,Holden - Rodeo RA 2003 - 2008, 6 CYLINDER - 2/4WD
Isuzu - D-Max Gen 1, 2008 - 2011, 4WD,Isuzu - D-Max Gen 2, 2012 - 2020, 2WD LOW RIDE
Polyair
POLYAIR 2" Lift Ultimate Airbag Kit, Toyota Landcruiser - 15993ULT
$387.00
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Landcruiser 300 Series
Polyair
POLYAIR 2" Lift Ultimate Airbag Kit, Lexus Lx - 15095ULT
$387.00
$430.00
This Kit # 15095ULT suits 2"/40-50mm LIFTED / RAISED HEIGHT TOYOTA LANDCRUISER 80, 100, 105 & 200 SERIES 08/1991 ONWARD - ALL MODELS.
* FREE SHIPPING AUSTRALIA WIDE & 2 YEAR WARRANTY is included in the Price of this Kit !!
We are now all expecting a lot out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more and now there’s the ultimate solution for this, with the “Polyair Ultimate Series”.
The Ultimate Series is an in-coil load assist Polyurethane Airbag System that provides superior load levelling capabilities, comfort & control to suit a vast range of vehicles, loads and conditions through its impressive 60psi rating.
The Polyair Ultimate’s significant 60 PSI Pressure Rating allows you to take on the tough loads whether you are highway touring or travelling off the beaten track.
The Polyair Ultimate Series is the most advanced Polyurethane Airbag on the market and will provide your vehicle with a high level of load support when required while allowing you to retain a comfortable ride when empty or only lightly loaded. It’s a Win-Win all round, for you, your family and your vehicle’s stability and control.
FEATURES & BENEFITS of POLYAIR ULTIMATE ‘Black’ Series:
A very High-Density Polyurethane Airbag System that is the strongest of its kind - Period !
Heavy Duty design and construction, made for Heavy Loads
Workable range from 5psi – 60psi giving a huge amount of control in spring rate variability
Reduces Sway & Body Roll for better Handling and Response
Great for towing – keeping both tow vehicle and trailer / van level & safe.
Corrects headlight aim
Corrects rear end sag, improving steering response
Lengthens the life of other suspension components such as coil springs, shock absorbers and bushes
Improves a rough ride through its progressive spring rate – even more so than a progressive rate coil spring
This kit offers great flexibility in varying the load capability of your vehicle as well as allowing a great level of ride comfort when the vehicle is empty or is only lightly loaded.
Ultimate Air Bags are incredibly strong and robust allowing them to last for years with correct installation, usage and regular bag pressure checks, just like your tyres.
In fact, we recommend checking your bag pressures every time you check your tyre pressures as the same laws of physics apply to both.
All Polyair airbags are manufactured by Polyair's Air Lift Industries division in the USA.
Beware of unbranded airbags, usually coming from Chinese factories.
To get the best performance from your kit inflate airbags just enough to achieve a level ride height.
By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicle's suspension.
Polyair
POLYAIR 2" Lift Ultimate Airbag Kit, Jeep Grand Cherokee - 11993ULT
$387.00
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Jeep - Grand Cherokee WK2 2011-on,COIL SPRING REAR
Polyair
POLYAIR 2" Lift Red Series Airbag Kit, Holden Colorado 7 / Trailblazer - 11092
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Holden - Colorado 7 Trailblazer RG
Isuzu - Mu-X Gen 1 & Gen 2, 2013 -on
Lightforce
LIGHTFORCE Viper 20" Double Row Light Bar - LFLB20D
$355.50
$395.00
We've got something that'll light up your off-road world like a bonfire on a starry night – the Lightforce 20-inch Dual-Row LED Light Bar. Hold onto your hats because this ripper of a light bar is an absolute game-changer.
Aussies love their wide-open spaces, and this Lightforce light bar is here to ensure you see every inch of it. It's part of the new and affordable VIPER range, slimmer and lighter– up to 25% less weight. But don't let its lightweight nature fool you; it's tougher than a hungry croc.
The Lightforce VIPER Light Bar rocks a screwless bezel design, making it a piece of cake to integrate seamlessly with your rig. You'll have that factory look you're after, which fits like a glove on your 4x4. No worries about water getting where it shouldn't either, with a water-tight IP68/69K rating.
It also comes with the exclusive "smart harness". It's got a built-in bridge rectifier, making it a breeze to connect to modern vehicles. It also has marine-grade, stainless steel side brackets that'll last longer than your rig. But that's not all – bonus rear slide mounts are thrown in for extra mounting options.
The 20" Dual-Row Light Bar will complement your spotlights, giving you a wider beam to conquer those dusty trails. No more ear-splitting interference with your AM or UHF radio – this beauty has your back.
Specs and Features:
Beam strength: 1 LUX @ 984 meters
SMART Harness included
Marine Grade Powder Coat
Waterproof with IP68/69K rating
Slim and lightweight design (25% lighter)
Screwless bezel for seamless integration
Exclusive "smart harness" for modern vehicles
Bonus rear slide mounts for extra options
Wide beam for enhanced visibility
Minimal radio interference
TJM Northern Beaches Expert Tip -When it comes to 4WD lights like this ripper from Lightforce, remember to give 'em a quick check before you hit the dusty trail. Make sure they're clean and secure. It'll ensure you're never caught in the dark.
What others are saying about this product
‘’Just quality.’’
Lightforce
LIGHTFORCE Viper 40" Single Row Light Bar - LFLB40S
$401.40
$446.00
The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts
Lightforce
LIGHTFORCE Venom Professional Edition Led Driving Light - VENOMLED150
$273.60
$304.00
FEATURES:
Made in Australia
75W LED / 8820lm (raw) for industry-leading output
21 x high-quality Lumileds LEDs that provide consistent performance
LED spot reflector with the ability to use a combination modular filter
66mm slim footprint that provides multiple mounting options
3 stage operation: Full intensity, day time, or nighttime positioning options
Reverse polarity voltage protection and high current waterproof connectors
CISPR25 compliant, reduced radio frequency interference technology
Thermal overload protection prevents light from overheating
Hard-wearing UV stable powder coat finish
IP69K rated / Gore® waterproof membrane to protect against water and dust
Pressure diecast aluminium housing and bezel providing lightweight strength
Impact-resistant polycarbonate filter for added protection
3 year warranty.
PRODUCT SPECIFICATION
More Information
Distance: 1 lux at
939m (Pair)
Effective Lumens
5764
Raw Lumens
8820
Colour Temperature
5000K
CRI
70
Current Draw
5.7Amps @ 13.2V
Voltage Range
10V - 32V DC
Wattage
75W
Ingress Protection Rating
IP69K
Weight
1.2kg Including Bracket
Torqit
TORQIT Pedal Torq To Suit Toyota Fj Cruiser, Hilux & Prado - PT1022
$395.01
$438.90
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
TORQIT Pedal Torq To Suit Mitsubishi Triton - PT1062
$395.01
$438.90
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Torqit
TORQIT Pedal Torq To Suit Jeep Grand Cherokee - PT1043
$395.01
$438.90
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Direction-Plus
DIRECTION-PLUS Preline-Provent Kit For Toyota Landcruiser 70 Series - PLPV642DPK
$806.40
$896.00
The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems.
PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced.
Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.
Direction-Plus
DIRECTION-PLUS Pl/Pv Kit For Nissan Navara D23 - PLPV630DPK
$680.40
$756.00
The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems.
PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced.
Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.
Direction-Plus
DIRECTION-PLUS Plpv Kit To Suit Isuzu D-Max & Mu-X - PLPV601DPK
$735.30
$817.00
The Direction-Plus™ Dual kit gives you the ultimate first line of defence, for your diesel engine. Combining both the PreLine-Plus Diesel Pre-Filter and ProVent Air/Oil Separator.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
With a water separation efficiency of over 93% and a long service life, meeting the specifications set by leading manufactures of diesel fuel injection systems.
PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced.
Direction-Plus™ ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent system, it is likely that your engine will experience a progressive reduction in performance. At 98% efficiency Direction-Plus™ ProVent systems, are specifically designed to separate oil from blow-by gases.
Direction-Plus
DIRECTION-PLUS Universal Provent Oil Separator Kit - PV200DPK
$278.06
$308.95
Direction-Plus™ Universal ProVent® oil separator PV200DPK kit comes with drain and adapters. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. . It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance.
Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DPK Kit:
• Up to 200 l/min blow-by gas
• Very compact design
• Available with high-efficiency or ultra-efficiency medium \n• Integrated pressure regulation for crankcase
• Also available with bypass valve (integrated in separation element)
• Tool-free element replacement with protection against incorrect insertion through turn-lock mechanism and element with integrated handle
• Suitable for use with open or closed CCV system
• Use of two ProVent 200 in parallel possible
• Check valve for oil return available (recommended)
Tough Dog
TOUGH DOG 13T Complete Recovery Kit - TDRK-13T
$345.00
$350.00
Tough Dog’s 13T Complete Recovery Kit has everything you need to safely get your vehicle back on track. The kit includes a 13T kinetic rope, soft shackles, recovery damper, gloves, and a heavy-duty carry bag. Tough Dog Kinetic Recovery Ropes are made from 100% double-braided nylon, offering up to 50% more elongation than standard snatch straps for smoother recoveries and reduced strain on your vehicle. Use the rope rated for the lightest vehicle involved—our 13T rope suits full-size 4WDs like 200 Series LandCruisers, Nissan Patrols, and 79 Series vehicles.
Key Features
1 x 13T Kinetic Recovery Rope for full-size 4WDs
2 x Soft Shackles for secure attachment
Recovery Damper included for safer tension management
1 x pair of Recovery Gloves for protection
Heavy-Duty Carry Bag for easy transport
Double-braided nylon rope offers 50% more elongation
Smoother, safer recoveries with reduced vehicle strain
Suitable for dual-cab utes, midsize 4WDs, and full-size 4WDs (depending on rope rating)
Warranty
Tough Dog Warranty applies (conditions vary; check official terms)
Delivery Information
We ship Australia-wide using trusted courier partners. Orders are dispatched same-day from our Sydney warehouse. Whether you’re metro or regional, expect fast, reliable delivery so you can get your recovery kit when you need it.
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
