DIRECTION-PLUS Fuel Manager Post-Filter Kit Isuzu D-Max / Mu-X ()...
$369.00
$410.00
Direction Plus™ Fuel Manager Post-Filter Kit PF631DPK is designed and engineered in Australia to suit Isuzu D-Max and MU-X models, protecting its engine against costly injector failure.
This kit fits:
Isuzu D-Max 4JJ1TC (3.0L 4cyl) 2012 – 2017
Isuzu MU-X 4JJ1TC (3.0L 4cyl) 2013 – 2017
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
FRONT RUNNER Expedition Perimeter Rail Kit - For 1964Mm (L)...
$369.00
$410.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1165mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXA003 - Expedition Rail Kit - Front or Back -1165mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1964mm (77.3") L x 1165mm (45.9") W x 63mm (2.5") H
Weight:5.17 kg (11.4 lbs)
FRONT RUNNER Canopy Load Bar Kit / 1425Mm (W) -...
$369.90
$411.00
Upgrade your pickup truck’s carrying capacity and easily transport adventure sports gear such as bikes, kayaks, and fishing rods with this Canopy Load Bar Kit. These bars are custom-designed to be mounted on a 1425mm canopy via a set of supplied mounted feet without compromising the canopy. Easily kit out your rig with a variety of compatible Front Runner accessories thanks to the sliding bolts t-slots which allow for quick fitting and removal.
Comes with all hardware and components needed to fit load bars on your Canopy, including four (4) mounting feet, two (2) 1425mm load bars, an installation kit and fitting instructions.
These load bars are mounted to your canopy via a set of supplied mounted feet.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack.
Made from steel and durable, weather-resistant black powder-coated aluminum.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCA013 - Canopy Load Bar Kit / 1425mm (W)Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.8kg (12.79lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 110mm (4")Length: 1500mm (59")Height: 145mm (6")Shipping Weight:Weight: 6kg (13lbs)
DIRECTION-PLUS Cri & Td42 For Nissan Patrol 3.0 - FM626DPK
$370.80
$412.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration, maximising the protection of your diesel fuel system.
FRONT RUNNER Expedition Perimeter Rail Kit - For 1964Mm (L)...
$370.80
$412.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1964mm (77.3") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:5.31 kg (11.7 lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1762Mm (L)...
$370.80
$412.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (69.4") L x 1345mm (53") W x 63mm (2.5") H
Weight:5.17 kg (11.4 lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1560Mm (L)...
$370.80
$412.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1345mm (53") W x 63mm (2.5") H
Weight:4.88 kg (10.8 lbs)
DIRECTION-PLUS Dual Batt Dp 30Kit For Isuzu D-Max & Mu-X...
$372.60
$414.00
Fuel Manager FM631DPK Pre Filter Kit for:Fuel Filter Water SeparatorIsuzu D-MAX 4JJ1-TC 3.0L 2013-17CRD Diesel Dual / Single BatteryIsuzu D-MAX MU-X 4JJ1-TC 3.0L 2013-17CRD Diesel Dual / Single BatteryThis filter unit is to be used as a Pre-Filter to separate water and contaminates thus avoiding costly repairs due to poor fuel quality. Comes complete with very specific fitting instructions and mounting bracket so all of the hard work is done !Kit FM631DPK Includes:1x FM30 Micron Filtration Unit1x FM0 Micron Filter Assy1x Vehicle Specific Bracket1x Fuel Line Rubber 12mm DFL122x Hose Clamps 12mm FMC122x Push-on Straight 12mm2x 1/4” NPT Straight 12mm2x 1/4” NPT Plug DP733-041x 2x Bolts, 2x Nuts, 4x Washers1x Thread Paste Sealant (6ml Tube)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1762Mm (L)...
$372.60
$414.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (69.4") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:5.29 kg (11.7 lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1560Mm (L)...
$372.60
$414.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Features
Consisting of:
1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)
1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Product Dimensions:
1560mm (61.4") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:
5 kg (11 lbs)
FRONT RUNNER Ford Ranger (2012-2019) Lockable Under Seat Storage Compartment...
$373.50
$415.00
Keep your passports, cash, travel documents and mobile devices out of sight and locked tightly in this all-steel safe, located neatly under the rear seats of the Ford Ranger T6 double-cab. Don’t worry about theft while on vacation ever again.
A lockable and hidden safe storage space is a must when travelling with cash, passports, travel documents or mobile devices.
Mounts out of sight under the rear seat, yet is easily accessible.
The set includes both left- and right-hand safes for the voids underneath the rear seats.
Manufactured from black powder coated 14-gauge thick steel.
A must-have when camping in remote locations without visible security.
Fitting instructions and hardware included.
Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Note: This storage compartment is not suitable for the US Spec Ford Ranger.
Consists of:1 x Left Hand Safe1 x Right Hand Safe2 x Cam Locks Incl. 2 keys per lockInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:Left Hand Safe:485mm (19.1") L x 265mm (10.4") W x 5mm (0.2") HRight Hand Safe:490mm (19.3") L x 376mm (14.8") W x 5mm (0.2") HWeight:5.5kg (12.1lbs)
DIRECTION-PLUS For Toyota Prado 120 1Kz - PV620DPK
$374.40
$416.00
Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
FRONT RUNNER Expedition Perimeter Rail Kit - For 1762Mm (L)...
$374.40
$416.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1762mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS009 - Expedition Rail Kit - Sides - for 1762mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1762mm (69.4") L x 1475mm (58.1") W x 63mm (2.5") H
Weight:5.36 kg (11.8 lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1560Mm (L)...
$374.40
$416.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1475mm (58.1") W x 63mm (2.5") H
Weight:5.07 kg (11.2 lbs)
DIRECTION-PLUS Provent Kit For Toyota Landcruiser 70 - PV615DPK
$376.20
$418.00
Direction Plus ProVent oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. Direction Plus ProVent systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
DIRECTION-PLUS Fm627Dpk To Suit Great Wall V200 - FM627DPK
$376.20
$418.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
FRONT RUNNER Expedition Perimeter Rail Kit - For 1964Mm (L)...
$376.20
$418.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1964mm (77.3") L x 1345mm (53") W x 63mm (2.5") H
Weight:5.42 kg (12 lbs)
FRONT RUNNER Rsi Canopy Full Size Pickup Load Bar Kit...
$377.10
$419.00
Massively increase the cargo-carrying capacity of your RSI Canopy by installing this durable Load Bar Kit on top of it. Load bars attach to the canopy using the supplied feet and they have the same T-slots as slats as a Front Runner roof rack, so you can fit rack accessories to it.
Includes all hardware and components needed to fit load bars on your Full Pickup when fitted with a RSI Canopy, including four (4) mounting feet, two (2) 1345mm load bars, an installation kit and fitting instructions.
These load bars are mounted to your RSI Canopy via a set of supplied mounted feet.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack.
Made from steel and durable, weather-resistant black powder-coated aluminum.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCA016 - RSI Canopy Full Size Pickup Load Bar Kit / 1345mmConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK015 - Roof Load Bar Pair 1345mm(W)2x RRAC921 - Canopy Rack Kit Installation SetMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 5.18kg (11.42lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 115mm (5")Length: 1450mm (57")Height: 155mm (6")Shipping Weight:Weight: 5kg (11lbs)
FRONT RUNNER Ineos Grenadier (2022-Current) Ladder - LAIG001
$377.10
$419.00
Upgrade your Grenadier adventure by fitting this strong 4-step ladder. Roof racks are for jerry cans, recovery tracks, storage boxes, bicycles, kayaks, and a roof top tent, all of which can be easily accessed with the Ineos Grenadier Ladder.
This ladder mounts to the vehicle's OEM Mounting points on the rear door.
The ladder mimics the rugged exterior of the vehicle and is made with off-road tough black powder-coated high-strength steel for maximum durability and strength.
The ladder has 4 steps.
Length from the bottom step to the top step is 1147.59mm / 45.18".
This ladder has a maximum load rating of 110kg /242.5lbs.
Fitment guide and installation hardware included.
Consists of:1 x Ineos Grenadier LadderInstallation GuideFitting Instructions
Materials used:Black powder-coated high strength steelBlack powder-coated aluminiumHigh-density polyethylene
Product Dimensions:1157mm (45.6") L x 208mm (8.2") W x 245mm (9.6") H
Weight:4.62kg (10.2lbs)
Load Rating:110kg (242lbs)
FRONT RUNNER Expedition Perimeter Rail Kit - For 1964Mm (L)...
$378.00
$420.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1964mm (77.3") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:5.54 kg (12.2 lbs)
FRONT RUNNER Canopy Load Bar Kit / 1475Mm - KRCA011
$378.90
$421.00
The Canopy Load Bar Kit was made for travelers who need additional canopy storage capacity, but don’t want to sacrifice a low-profile build. These 1475mm bars use the same durable aluminum slats as the Slimline II Roof Rack, allowing you to mount Front Runner accessories.
Comes with all hardware and components needed to fit load bars on a vehicle, including four (4) mounting feet, two (2) 1475mm load bars, an installation kit and fitting instructions.
These load bars are mounted to your canopy via a set of supplied mounted feet.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack.
Made from steel and durable, weather-resistant black powder-coated aluminum.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCA0011 - Canopy Load Bar Kit / 1475mm - by Front Runner
Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK017 - Roof Load Bar Pair 1475mm(W)
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 6kg (13.23lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 110mm (4")Length: 1585mm (63")Height: 135mm (6")
Shipping Weight:Weight: 5.6kg (12lbs)
MSA Nissan Patrol Utilities Gu (Y61) Dx Ute Front Bucket...
$379.80
$422.00
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Position: Front
MSA Toyota Hilux Hi-Lux Cab Chasis Single Cab/ Workmate Front...
$379.80
$422.00
Front Bucket + 3/4 Bench.
Year: 05/05-10/15
Model: Cab Chassis Single Cab / Workmate
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Hilux Single/ Extra/ Dual Cab Front Bucket And...
$379.80
$422.00
Front Bucket & 3/4 Bench.
Year: 08/97-04/05
Model: Single, Extra & Dual Cab
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser 76 Series Wagon Workmate Gxl Front Twin...
$379.80
$422.00
Front Twin Buckets + Integrated Lumbar Support (Extra Large Headrest).
Year: 10/16-CURRENT
Model: LC76 Wagon Workmate / GXL
MSA Toyota Landcruiser 76 Series Lc76 Wagon Workmate Gxl Front...
$379.80
$422.00
Front Twin Buckets Pair.
Year: 03/07-08/12
Model: LC76 Wagon Workmate / GXL
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser 78 Series Troop Carrier Workmate Gxl Front...
$379.80
$422.00
Front Bucket & 3/4 Bench.
Year: 11/09-08/12
Model: LC78 TROOP CARRIER / WORKMATE / GXL
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser 79 Series Lc79 Dual Cab Gxl /...
$379.80
$422.00
Front Twin Buckets + Integrated Lumbar Support.
Year: 10/16-CURRENT
Model: LC79 DUAL CAB / GXL / WORKMATE
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser 79 Series Lc79 Single Cab Gxl /...
$379.80
$422.00
Front Twin Buckets + Integrated Lumbar Support.
Year: 10/16-CURRENT
Model: LC79 SINGLE CAB / GX / GXL
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA Toyota Landcruiser 79 Series Workmate, Gx, Gxl, Cab Chassis...
$379.80
$422.00
Front Twin Buckets Pair.
Year: 11/09-08/12
Model: LC79 WORKMATE / GX / GXL / CAB CHASSIS
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA 4X4 75 Series Lc75 Landcruiser Front Seat Covers -...
$379.80
$422.00
MSA 4x4 75 Series LC75 LandCruiser Front Seat Covers - 7502
SUITS: Landcruiser 75 Series LC75 Standard Ute + Landcruiser 75 Series LC75 Personnel Carrier
Front twin bucket and 3/4 bench seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Landcruiser 78 Series Front Seat Covers - 78907
$379.80
$422.00
MSA 4x4 Landcruiser 78 Series Front Seat Covers - 78907
SUITS:
Landcruiser 78 (08/12-09/16) Troop Carrier Workmate/GXL + Landcruiser 79 (08/12-09/16) Single/Dual Cab Workmate/GX/GXL
Includes: Front twin bucket and 3/4 bench seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Ford Ranger Pj/Pk + Mazda Bt50 Front Seat...
$379.80
$422.00
MSA 4x4 Ranger PJ/PK + BT50 Front Seat Covers- FRT502
SUITS: Ranger PJ/PK + BT50
Includes: Front Seat Covers
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Hilux Sr Single/Extra/Dual Cab Front Seat Covers -...
$379.80
$422.00
MSA 4x4 HiLux SR Single/Extra/Dual Cab Front Seat Covers- HL40
SUITS: HiLux SR Single/Extra/Dual Cab
Front twin bucket seats
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA 4X4 Patrol Gu (Y61)+ Patrol Gu Front Twin Seat...
$379.80
$422.00
MSA 4x4 Patrol GU (Y61)+ Patrol GU Front Twin Seat Covers- GU02
SUITS: Patrol GU (Y61) Series 1 DX/ST Wagon + Patrol Utilities GU (Y61) ST Ute
Front twin bucket seats with console cover
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
Front twin bucket seats
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
FRONT RUNNER Expedition Perimeter Rail Kit - For 1964Mm (L)...
$379.80
$422.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1964mm long x 1475mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXM003 - Expedition Rail Kit - Front or Back -1475mm(W)1x KRXS010 - Expedition Rail Kit - Sides - for 1964mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1964mm (77.3") L x 1475mm (58.1") W x 63mm (2.5") H
Weight:5.61 kg (12.4 lbs)
FRONT RUNNER Volkswagen T5/T6 (2003-Current) W/Sca Pop Top Roof Load...
$379.80
$422.00
Pile on the adventure gear with the help of these low-profile, Volkswagen T5/T6 Load Bars. Added bonus? These bad boys can be used in the future as part of a complete Front Runner Roof Rack.
A set of Load Bars used to transport gear on the roof of your Volkswagen T5/T6 (2003-Current) w/SCA Pop Top Roof. This low profile solution includes 4 mounting Feet that fit into OEM SCA Pop Top rails, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions.
These Load Bars are mounted to the Volkswagen T5/T6 w/SCA Pop Top Roof via a set of supplied Mounted Feet.
This system installs easily with off-road tough feet that grip onto the existing factory/OEM SCA Pop Top rails. No drilling required.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRVK009 - Volkswagen T5/T6 (2003-Current) w/SCA Pop Top Roof Load Bar Kit
Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK015 - Roof Load Bar Pair 1345mm(W)2x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit1x WDLB001 - Load Bar Wind Deflector / 10mm
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 5.61kg (12.37lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 110mm (4")Length: 1475mm (58")Height: 150mm (6")
Shipping Weight:Weight: 6.2kg (14lbs)
DIRECTION-PLUS Universal 12Mm Fuel Manager Pre-Filter Kit () - FM802DPK
$380.70
$423.00
The Universal Fuel Manager Pre-Filter Kit FM802DPK, comes with a 30 micron element + bracket + 12mm hose and fittings. It protects late model common rail diesel engines against costly injector failure. It is designed specifically to cope with extreme weather conditions and poor fuel quality.
PROTECT YOUR DIESEL ENGINE AGAINST WATER AND PARTICLE CONTAMINATION
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems? Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
FUEL MANAGER: HOW IT WORKS
When you install the Direction Plus™ Fuel Manager pre-filter kit between the fuel tank and the O.E.M fuel filter, Fuel Manager will remove most of the contamination by particles and water present in the diesel fuel.
HIGH LEVEL PROTECTION
As a result, the O.E.M fuel filter will do the final and finer filtration. Therefore, this ensures you are maximising the protection of your diesel fuel system.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Pv Kit For Toyota Hilux (My19) - PV662DPK
$381.60
$424.00
Direction-Plus™ ProVent® oil separator kits protect your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
By not fitting a Direction-Plus™ ProVent® system, it is likely that your engine will experience a progressive reduction in performance. Direction-Plus™ ProVent® systems, are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump.
DIRECTION-PLUS Ryco Pre-Filter Kit Prado 150 / 155 () -...
$384.30
$427.00
Direction Plus™ Ryco Pre-Filter Kit RC620DPK is designed, engineered & assembled in Australia to suit Toyota Prado 150 and 155 Series (2009-2021) models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles.
This kit fits:
Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl) 2009 – 2015
Toyota Prado 150/155 Series 1GD-FTV (2.8L 4cyl) 2015 – On
PROTECT YOUR ENGINE
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water.
HOW IT WORKS
Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A RYCO PRE-FILTER KIT:
Isolate water before it journeys through your fuel system causing damage.
Protect your fuel system from corrosion of metal components that left unaddressed
can cause expensive damage to your fuel system.
Reduce micro-bacterial growth caused by water contamination, which can reduce
engine durability and performance.
Remove other contaminants down to 10 microns, meaning your OE filter does not
have to work as hard.
Water resistant silicone coated filter media provides maximum efficiency, life and flow
Maximum working Pressure 87 PSI/6 bar/600 kPa
Give you a visible or audible alert to water in your fuel system allowing you to take
action to protect your engine (when used with S102XK and S101X accessories).
Allow you to easily drain water from your fuel system multiple times to get to safety
or a mechanical workshop.
Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Ryco Pre-Filter Kit Toyota Landcruiser 70 () - RC625DPK
$385.20
$428.00
Direction Plus™ Ryco Pre-Filter Kit RC625DPK is designed, engineered & assembled in Australia to suit Toyota Land Cruiser 70 Series models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles.
This kit fits:
Toyota Land Cruiser 70 Series 1VD-FTV (4.5L 8cyl) 2012 – On
*Radiator mounting location
PROTECT YOUR ENGINE
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water.
HOW IT WORKS
Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A RYCO PRE-FILTER KIT:
Isolate water before it journeys through your fuel system causing damage.
Protect your fuel system from corrosion of metal components that left unaddressed
can cause expensive damage to your fuel system.
Reduce micro-bacterial growth caused by water contamination, which can reduce
engine durability and performance.
Remove other contaminants down to 10 microns, meaning your OE filter does not
have to work as hard.
Water resistant silicone coated filter media provides maximum efficiency, life and flow
Maximum working Pressure 87 PSI/6 bar/600 kPa
Give you a visible or audible alert to water in your fuel system allowing you to take
action to protect your engine (when used with S102XK and S101X accessories).
Allow you to easily drain water from your fuel system multiple times to get to safety
or a mechanical workshop.
Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards
Check fitment guide below to confirm suitability for your vehicle.
FRONT RUNNER Bbq/Fire Pit And Wolf Pack Pro Kit -...
$386.10
$429.00
Grill and go with this BBQ/Fire Pit & Wolf Pack Pro Kit. The grill folds down and fits perfectly within the Wolf Pack to create the ideal camp cooking solution so all you have to do is choose your next adventure.
This kits contains the BBQ/Fire Pit and the Wolf Pack Pro.
A BBQ/Fire Pit that is designed to pack flat at 1.5 inches / 38mm thick.
Features a large grill surface area.
Sturdy base for safe grilling.
Quick and easy 30-second setup.
Sides of grill serve as a wind-break.
Safely contains your fire and keeps the fire elevated off the ground.
Constructed from high strength steel, providing high rust and corrosion resistance.
Supplied with gird lifting tools.
Stores neatly in the included Wolf Pack Pro.
Consists of:1 x BBQ/Fire Pit Assembly1 x Wolf Pack Pro
BBQ/Fire Pit Materials used:3CR12 Steel
BBQ/Fire Pit Dimensions:Open Dimensions:436mm (17.2") L x 436mm (17.2") W x 310mm (12.2") H
Close Dimensions:415mm (16.3") L x 310mm (12.2") W x 50mm (1.9") H
BBQ/Fire Pit Weight:7.9kg (17.4lbs)
Wolf Pack Pro Materials used:Polypropylene black plastic
Wolf Pack Pro Dimensions:External Dimensions:510mm (20.1") L x 400mm (15.7") W x 230mm (9.1") H
Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H
Wolf Pack Pro Weight:3.65kg (8.1lbs)
Total Weight:11.6kg (25.6lbs)
POLYAIR Ultimate Series Airbag Kit -Toyota Landcruiser 300 Series 1"...
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:- Air adjustable from 5-60psi !- Tough molded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Landcruiser 300 Series
POLYAIR Ultimate Series Airbag Kit Toyota - Lexus, Landcruiser 1"...
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Lexus LX, 1995-on, NON-AIR SUSPENSION
Toyota - Landcruiser 80 Series, Toyota - Landcruiser 100 series IFS, Toyota - Landcruiser 200 Series
POLYAIR 2" Lift Ultimate Airbag Kit, Mercedes X Class -...
$387.00
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
POLYAIR Raised Ultimate Airbag Kit, Mitsubishi Challenger - 15895CULT
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Mitsubishi - Challenger 2008 - 2016 - PB/PC
Mitsubishi - Pajero Sport 2015-on - QE
POLYAIR 2" Lift Ultimate Airbag Kit, Ldv D91 - 19895ULT
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
LDV - D90 2017-on
POLYAIR 3" Lift Ultimate Airbag Kit, Toyota Fj Cruiser -...
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Prado 120 / 150 series
POLYAIR Standard Ultimate Airbag Kit, Holden Colorado 7 / Trailblazer...
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Holden - Colorado 7 Trailblazer RG
Isuzu - Mu-X Gen 1 & Gen 2, 2013 -on
POLYAIR Standard Ultimate Airbag Kit, Mercedes X Class - 12096ULT
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
