FRONT RUNNER Roof Top Tent Cover / Tan - TENT035
$199.80
$222.00
A durable tent cover made from 1000D PVC protects your tent when not in use.
Features
Material used:
1000D PVC
Product Dimensions:
1255mm (49.4") L x 1355mm (53.3") W x 310mm (12.2") H
Weight:
3.08kg (8.4lbs)
Color:
Tan
FRONT RUNNER Land Rover Discovery Lr4 Battery Bracket- - BBLD004
$202.50
$225.00
This battery bracket allows you to fit an additional battery to your vehicle by mounting as an additional bracket under your vehicle's hood.
Includes all fitment parts.
Made out of black powder coated high strength steel.
Fits Right Hand Drive vehicles.
NOTE: Not suitable for models fitted with an Auxiliary heater.
FRONT RUNNER Wind Fairing For Low Profile Rack / 1165Mm/1255Mm(W)...
$202.50
$225.00
Make a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing for Low Profile rack kits. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds.
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Consists of:1 x Wind Fairing4 x Brackets1 x Rubber BladeInstallation HardwareFitting instructions
Materials used:Black powder coated aluminumEPDM Rubber
Product Dimensions:1087mm(42.8") L x 2mm(0.1") W x 127mm(5") H
Weight:1.5kg (3.3lbs)
FRONT RUNNER Rotopax Side And Top Mount Kit - RRAC112
$206.10
$229.00
Free up rack space and mount fuel and water to the side or top of a Slimline II Rack.
The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack.
The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96")) and tilt (12.5 degree increments up to 25 degrees) adjustable.
Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle.
Rotopax Rack Mounting Plate measures in at 480mm (18.9") L x 250mm (9.8") W x 20mm (0.8") H, weighs 1,58kg (3.5lbs).
Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack.
Installation hardware and fitting instructions included.
PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.
Features
Consists of:
1 x RotoPax Mounting Plate (RRAC105)
1 x Pair of RotoPax Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
97mm (3.8") L x 480mm (18.9") W x 243mm (9.6") H
Weight:
2.88kg (6.4lbs)
MSA Delux Coffee Kit Black - 45042
$207.00
$230.00
SUITS: All MSA 4X4 Storage Drawers
Fits snuggly into a MSA 4X4 Storage Drawer System
FEATURES: CONTENTS
1 x 600ml Thermo Coffee Plunger
2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation
2 x 500ml Storage Canisters for coffee, sugar or creamer
1 x 30ml Coffee Measuring Spoon
2 x MSA 4X4 Branded Teaspoons
Mirco Fibre Cleaning Cloth
STORAGE BAG
Spill and water-resistant high quality Hypalon exterior and PVC interior
Carrying handle
Zip with double MSA 4X4 branded zip pulls
INCLUDES:
2 Year Manufacturer’s Warranty on all items
Care and safety document
(Coffee beans NOT included)
MSA Delux Coffee Kit Cream - 45043
$207.00
$230.00
SUITS: All MSA 4X4 Storage Drawers
Fits snuggly into a MSA 4X4 Storage Drawer System
FEATURES: CONTENTS
1 x 600ml Thermo Coffee Plunger
2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation
2 x 500ml Storage Canisters for coffee, sugar or creamer
1 x 30ml Coffee Measuring Spoon
2 x MSA 4X4 Branded Teaspoons
Mirco Fibre Cleaning Cloth
STORAGE BAG
Spill and water-resistant high quality Hypalon exterior and PVC interior
Carrying handle
Zip with double MSA 4X4 branded zip pulls
INCLUDES:
2 Year Manufacturer’s Warranty on all items
Care and safety document
(Coffee beans NOT included)
FRONT RUNNER Rack Ladder Side Mount Bracket - RRAC269
$208.80
$232.00
A bracket set that attaches to the side profile of your Slimline II or Slimpro Van Roof Rack.
Adjustable to suit all vehicle types and load beds.
Mounts your Rack Ladder to these brackets to access the roof of your vehicle.
These brackets can be left on your rack without being obtrusive.
Made from high-grade steel and powder coated with the same durable all-weather epoxy powder coating as the Front Runner racks.
Features
Consists of:
1 x Pair of Ladder Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
182mm (7.2") L x 87mm (3.4") W x 397mm (15.6") H
Weight:
3kg(6.6lbs)
FRONT RUNNER Universal Drop Down Tailgate Table - TBRA054
$211.50
$235.00
Elevate your snack or drink stops when adventuring in your vehicle with this Universal Drop Down Tailgate Table. Incredibly, it can be fitted onto any flat surface, providing a handy, on-the-go workspace. Perfect for putting the kettle, cups, glasses, or snacks on.
This Universal Drop Down Table will fit on any flat surface equal to, or larger than: 640mm/25.2" W x 330mm/13" H.
It is a universal drop down table features a large working surface of 615mm/24.2" W x 257mm/10.1" L, perfect for small cooking appliances, kettle/coffee station.
Stores neatly at 64mm/2.5" when closed.
The Universal Drop Down Table lowers to open at 90 degrees from the mounted base.
The table latch features a hole to securely lock the drawer in place, Rack Accessory Lock / Small can be used. *Sold Separately
Maximum load: 20Kg (44.1lbs).
Drilling is required for installation.
Installation hardware and fitment guide included.
Consists of:1 x Table Assembly1 x Catch Assembly2 x Arm Assembly2 x Mounting Bracket (1 Left Hand side & 1 Right Hand side)Installation HardwareFitting Instructions
Product Dimensions:Closed Dimensions:64mm (2.5") L x 636mm (25.03") W x 320mm (12.60") H
Fully Opened Dimensions:264mm (10.4") L x 636mm (25.03") W x 320mm (12.60") H
Weight:3.2kg (7.05lbs)
Load Rating:20kg (44.1lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting instructionsMaterials used:Black powder coated steelProduct Dimensions:1405mm (55.3") L x 210mm (8.3") W x 206mm (8.1") HWeight:4.55kg (10lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2166Mm...
$213.30
$237.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 11 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 11 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2046mm (80.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.6kg (7.9lbs)
FRONT RUNNER Under Rack Table Bracket - TBRA039
$214.20
$238.00
Transport your Front Runner Table underneath your roof rack with this noise-free, easy-access solution. These off-road tough brackets can be mounted either parallel or perpendicular to the roof rack's slats giving you the option to access the table from either the side or rear of the vehicle.
These brackets have been designed to work in conjunction with the Under Rack Table and Under Rack Table Latch to make transporting a sturdy table as simple and effortless as possible.
Under Rack Table:
A no-noise and secure storage solution designed specifically for the Under Rack Table.
The brackets are easily installed and can be mounted either parallel or perpendicular to the roof rack's slats giving you the option to access the table from either the side or rear of the vehicle.
Made from steel and black powder-coated in the same durable and corrosion-resistant coating as Front Runner racks.
Under Rack Table Latch:
Keeps the Under Rack Table securely stored in the Under Rack Table Brackets.
Secured to the top of the Slimline II rack using the T-slot and clamps over the lip of the table to keep it in place.
A rubber insert prevents rattling and damage to the table.
Spring-loaded for ease of use.
Lockable for added security.
Made of steel that is black powder coated in the same durable and corrosion-resistant coating as the Front Runner racks.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.Not all Foot Rails accommodate side mount Tables. If unsure? Please contact the Front Runner Help Center.
Consists of:2 x Table Slide Bracket1 x Table LatchInstallation HardwareFitment Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:Single Side Bracket Dimensions:980mm (38.6") L x 63mm (2.5") W x 44mm (1.8") H
Latch Dimensions:50mm (2") L x 50mm (2") W x 115mm (4.5") HWeight:4kg (8.8lbs)
FRONT RUNNER Land Rover Defender Puma (2007-2016) Gullwing Box Shelf-...
$215.10
$239.00
Shelf made from plywood and powder-coated mild steel.Up to 6 of these shelves can be used in a gullwing box.Shelf has slots cut in to allow for various fixing straps or elastic straps to be used to secure plates or other items.
Consists of:1x Mild steel & wood Shelf1x Installation KitMaterial used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steelProduct dimensions:264mm (10.4") L x 856mm (33.7") W x 36mm (1.4") HWeight:3.8kg (8.4lbs)
FRONT RUNNER Wind Fairing For Low Profile Rack / 1345Mm/1425Mm(W)...
$215.10
$239.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1262mm (49.7") L x 2mm (0.1") W x 127mm (5") H
Weight:
1.6kg (3.5lbs)
FRONT RUNNER Recovery Device And Gear Holding Side Brackets -...
$215.10
$239.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1345mm (53") W x 63mm (2.5") H
Weight:4.88 kg (10.8 lbs)
POLYAIR Bellows Air Bag Cradle Kit. - ABC100
$242.00
This Airbag Cradle kit is specifically designed to fit the 88206-2 & 88206-2R kits for the RG Colorado & Isuzu Dmax "No Drill" Bellow kits. The Airbag Cradle is specifically designed to allow your leaf sprung vehicle to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveler.
Compatibility
FORD AUSTRALIA
MAZDA
NISSAN
TOYOTA
POLYAIR Bellows Air Bag Cradle Kit. - ABC102
$217.80
$242.00
This airbag cradle kit is specifically designed to allow your 75-79 series to still have full down travel whilst carrying loads.
The cradle simply bolts onto the upper or lower bracket and allows the airbag to comfortably and safely lock into its capture without physically bolting on. The perfect bellows series accessory for the offroad weekender or avid traveller.
Do you need maximum wheel travel with no down travel restrictions? then this is the Airbag kit for you
Compatibility
HOLDEN
ISUZU
MAZDA
TOYOTA
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack Wind...
$217.80
$242.00
Enhance the performance of the Slimsport Roof Rack on your Ram 1500 with this smart Rack Wind Fairing. It will massively reduce wind noise and fuel consumption while allowing easy airflow over your rack and accessories-a great way to quieten your ride.
A wind fairing for the RAM 1500 Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack Wind Fairing
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1371mm (54") L x 222mm (8.7") W x x 210mm (8.3") H
Weight:
4.4kg (9.7lbs)
FRONT RUNNER Ram 1500 Crew Cab (2019-Current) Slimsport Rack 40In...
$217.80
$242.00
Improve the performance of the Slimsport Rack on your Ram 1500 with this useful Light Bar Ready Wind Fairing. It accommodates a Slim 40" LED Light Bar while massively reducing wind noise and fuel consumption allowing easy airflow over the rack and accessories. It's a great way to quieten your ride.
Lightbar wind fairing for RAM 1500 Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x RAM 1500 Slimsport Rack 40" Light Bar Wind Fairing
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1370mm (53.9") L x 200mm (7.9") W x 177mm (7") H
Weight:
4kg (8.8lbs)
FRONT RUNNER Narrow Wind Faring For Rack / 1165Mm/1255Mm(W) -...
$219.60
$244.00
To reduce roof rack wind noise and aid the efficient air movement over your rack.. The quick-to-fit Narrow Wind Fairing for Rack will do just that and fits the 1165mm and 1255mm wide trays.
A wind fairing for the narrow 1165mm and 1255mm trays.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. A protective vinyl strip is included to protect vehicle paint.
Brackets and installation hardware included.
Features
Consists of:
1 x Low Profile Wind Fairing
1 x Protection Strip
Installation Hardware
Fitment Guide
Materials used:
Black powder-coated high strength steel
Product Dimensions:
87mm (3.4") L x 950mm (37.4") W x 200mm (7.9") H
Weight:
1.53kg (3.4lbs)
MSA 4X4 Battery Box Slimline - 40019
$220.50
$245.00
MSA 4x4 Battery Box Slimline- 40019
The MSA 4X4 Battery Box is a safe, secure and versatile solution for adding an auxiliary power supply to a vehicle.
The neat and compact design makes a perfect addition to an MSA 4X4 Storage Drawer System. It can be positioned out of sight under side wing kits yet still easily accessible or fitted universally inside a trade canopy. Available in two sizes, Large to fit standard N70, AGM or Lithium batteries and Slimline for smaller Lithium batteries.
The mounting Plate is designed to attach to the drawers with Backing Plates for adjustable positioning of the Battery Box, gaining support from the drawer and alleviating the need to drill through the floor of the tray.
An insulated Lid prevents any issues that could arise from exposed Battery terminals. Both ends of the Battery Box have Protective foam insert panels, with entry and exit points for wiring to the battery.
Adjustable Plastic dipped Securing Saddles bolt down from the top to hold the battery in place. A secure mounting plate is supplied and can be installed at either end. Perfect for mounting a Compressor, BC/DC charger or Fuse box.
FEATURES:
2mm powder-coated steel construction
Height Adjustable mounting Plate
Protective foam insert panels,
2x Battery Securing Saddles offering a solid and secure fit
Insulated Rubber Lid
Compressor, BC/DC charger, or fuse box Mounting plate
INCLUDES:
MSA 4X4’s Lifetime Guarantee
MSA 4X4 Right Power Panel (Passenger Side) - EPP-LEFT
$223.20
$248.00
MSA 4x4 Left Power Panel (Passenger Side)- EPP-LEFT
These pre-wired, 3-Way Power Panels are designed to replace the Wing Face Plates and attach them to the Wing Kit Brackets on the sides of an MSA 4X4 Storage Drawer System. Creating a perfectly flush finish and include:
3 x labelled, illuminated Rocker switches (Water Pump, Compressor and Aux Light) and 2 spare switch covers (1 x Fridge and 1 x Inverter)
2 Port 4.2A (combined) USB charging outlets
2 x cigarette lighter sockets
Illuminated auxiliary battery voltage display
Angled sockets to suit being installed on the front of a set of drawers, so that accessory plugs in use, do not hit the vehicle tailgate or wagon doors
Pre-wired for faster installation
Unique injection-moulded backing plate which protects the back of the switches and wiring from loose items stored under the Storage Drawer Wings
FRONT RUNNER Toyota Tundra (2022-Current) Slimsport Rack 40In Light Bar...
$225.90
$251.00
Lightbar wind fairing for Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab (2022-Current) Slimsport Rack 40" Light Bar Wind Fairing
1 x Fitting Instructions
Installation Hardware
Materials used:
Black power coated steel
Product Dimensions:
1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:
4.2kg (9.3lbs)
FRONT RUNNER Toyota Tundra Crew Cab (2022-Current) Slimsport Rack Wind...
$225.90
$251.00
A wind fairing for the Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab Slimsport Rack Wind Fairing
1 x Fitment Guide
1 x Installation Hardware
Materials used:
Black powder coated steel
Product Dimensions:
1460mm (57.5") L x 250mm (9.8") W x 50mm (2") H
Weight:
4.7kg (10.3lbs)
FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Rack 40 Light Bar...
$226.80
$252.00
The Slimsport Rack Wind Fairing is specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Light Bar Wind Fairing for the Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
Durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Consists of:1 x Toyota Rav4 Slimsport Rack 40" Light Bar Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1175mm (46.3") L x 178mm (7") W x 161mm (6.3") H
Weight:4.94kg (10.9lbs)
FRONT RUNNER Toyota Rav4 (2019-Current) Slimsport Rack Wind Fairing -...
$226.80
$252.00
Reduce the drag and wind noise over the roof rack of your Toyota Rav4 with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Toyota Rav4 (2019-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Rav4 Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1175mm (46.3") L x 172mm (6.8") W x 203mm (8") H
Weight:3.25kg (7.2lbs)
FRONT RUNNER Toyota Sequoia (2023-Current) Slimsport Rack Wind Fairing -...
$226.80
$252.00
Enhance the aerodynamics of your Toyota Sequoia and experience a smoother, quieter ride when you’re hauling loads with the purpose-built Slimsport Rack Wind Fairing. This innovative accessory is designed to minimize drag and reduce wind noise by effectively directing airflow over your Slimsport Roof Rack (and the gear loaded on it).
A wind fairing for the Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Sequoia (2023-Current) Slimsport Rack Wind Fairing1 x Fitting InstructionsInstallation Hardware
Materials used:Black powder coated high strength steelStainless steel fasteners
Product Dimensions:1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:4.2kg (9.3lbs)
FRONT RUNNER Toyota Sequoia (2023-Current) Slimsport Rack 40 Light Bar...
$226.80
$252.00
Improve aerodynamics and enjoy a quieter ride on your loaded Toyota Sequoia with the specially-designed Slimsport Rack Wind Fairing. This innovative accessory reduces drag and minimizes wind noise by efficiently channeling air over your Slimsport Roof Rack. This particular model features a 40" cutout to allow the use of the Front Runner 40" Light Bar, so you can keep exploring even after the sun goes down.
Lightbar wind fairing for the Toyota Sequoia (2023-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Toyota Sequoia 40" light bar wind fairingFitment Guide Installation Hardware
Materials used:Black powder-coated high strength steel
Product Dimensions:1281mm (50.4") L x 169mm (6.7") W x 172mm (6.8") H
Weight:4kg (8.8lbs)
FRONT RUNNER Suzuki Jimny 3 Door (2018-Current) Rear Window Molle...
$227.70
$253.00
This Jinmy 4 Gen Molle Panel creates much-needed storage space or storage configuration options.
Installation to vehicles without a curtain airbag (South Africa):
Mounts to the rear grab handle and the factory mounting points under the left or right rear window. No drilling is required.
Installation to vehicles with a curtain airbag (EU and AU):
Drilling is required above the rear window and secures to the factory mounting points under the left or right rear window.
Strap your additional supplies and adventure gear to the Molle Panel using the supplied straps, two (2) long and two (2) short adjustable webbing straps included.
Made of high-strength steel and sealed in the same durable black powder coating as the Front Runner rack.
The Molle Panel is compatible with the Suzuki Jimny Internal Storage Shelf to maximize the load solutions.
Features
Consists of:
1 x Molle Panel
2 x Mounting Brackets
2 x Short Molle Panel Straps
2 x Long Molle Panel Straps
Installation Instructions
Fitting Instructions
Materials Used:
Black powder coated high strength steel
Product Dimensions:
Molle Panel Dimensions:
630mm (24.8") W x 3mm (0.1") D x 450mm (17.7") H
Product Dimensions w/Grab Handle Bracket:
556mm (21.9") H x 630mm (24.8") W x 65mm (") D
Product Dimensions w/Drill Mount Bracket:
458 (19.1") H x 630mm (24.8") W x 50mm (2") D
Weight:
3.7 kg (8.2lbs)
FRONT RUNNER Wind Fairing For Rack / 1165Mm/1255Mm(W) - RRAC143
$233.10
$259.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: This Wind Fairing is not suitable for the Toyota Rav4 Adventure Models
Note: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:
1.1kg (2.4lbs)
FRONT RUNNER Kayak Carrier / Foldable J Style - RRAC256
$233.10
$259.00
Designed to carry a variety of hull shapes as well as SUPs.
This is a J style Kayak foldable bracket.
The cushioned padded bars protect the hull.
Large contact surface area for extra stability when transporting your kayaks.
Includes 2 x Tie Down Straps with protective buckle bumpers.
Installation hardware supplied.
Features
Consists of:
2 x Foldable Kayak Carrier Brackets
2 x Tie Down Straps
Installation Hardware
Fitting Instructions
Open Dimensions
795mm (31.3") L x 426mm (16.8") W x 462mm (18.1") H
Closed Dimensions
472mm (18.6") L x 270mm (10.6") W x 102mm (4") H
Weight
5.17kg (11.4lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack Wind...
$234.90
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing adds a bold look while channeling air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford Ranger T6 / Wildtrak / Raptor (2012-2022) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Works with or without a sunroof.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack 40In...
$234.90
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Lightbar wind fairing for the Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack Wind...
$234.90
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford F150 Super Crew (2015-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Works with or without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack 40In...
$234.90
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Light Bar Wind Fairing for the Ford F-150 Super Crew (2015-2020) Slimsport Roof Rack Kit / Lightbar ready
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Works with or without a sunroof
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
DIRECTION-PLUS Universal Provent Ultimate Catch Can () - PV200DP
$237.60
$264.00
PROTECT YOUR DIESEL ENGINE AGAINST OIL & SOOT CONTAMINATION
Direction-Plus™ Universal ProVent® Ultimate Catch Can only (PV200DP) kit comes with:
Inc Provent 200 Element
It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. It also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance.
DOESN’T VOID YOUR WARRANTY!
If you are wondering about your vehicle’s warranty, you don’t need to worry about it, because this kit doesn’t void any vehicle’s warranties. You can read an article from AAAA about Genuine Parts and Vehicle Warranty HERE.
Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DP:
• Up to 200 l/min blow-by gas
• Very compact design
• Available with high-efficiency or ultra-efficiency medium
• Integrated pressure regulation for crankcase
• Also available with bypass valve (integrated in separation element)
• Tool-free element replacement with protection against incorrect insertion
through turn-lock mechanism and element with integrated handle
• Suitable for use with open or closed CCV system
• Check valve for oil return available (recommended)
FRONT RUNNER Universal Track Non Drilled / 1800Mm(L) - TRAC010
$251.10
$279.00
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the T-slot of the track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
Suitable for universal fitment of a roof rack should the vehicle roof allow.
Often used for trailers and canopies to mount a rack or load bars.
Each track is supplied with fitted double-sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
Powder coated black.
Comes in pairs.
Features
Consists of:
1 x Pair of tracks
1 x Pair of rubber track liner
Installation Hardware
Fitment Guide
Materials used:
Black powder coated aluminum
Rubber
Product Dimensions:
1800mm (70.9") L x 45mm (1.8") W x 15mm (0.6") H
Weight:
2.6kg (5.7lbs)
FRONT RUNNER Land Rover Defender (1983-2016) Under Console Safe -...
$256.50
$285.00
This safe is bolted to the body of the vehicle under the original center console and is manufactured from 2mm thick mild steel. It features a tamper proof cam lock and is carpet lined to protect your valuables and prevent rattling.
Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Features
Consists of:
1x Under console safe
2x Keys supplied
Materials used:
Black powder-coated mild steel
Carpeted base
Product Dimensions:
433mm (17.1") L x 275mm (10.8") W x H 100mm (3.9")
Internal Dimensions:
375mm (14.8") L x 265mm W (10.4") (Raised section)/205mm (8.1") W (Lower Section) x 107mm (4.2") H
Weight:
3.2kg (7.1lbs)
FRONT RUNNER Typhoon Bag - RRAC159
$258.30
$287.00
It’s raining, it’s pouring and you’re still out exploring. Ready for extreme weather, the heavy-duty Typhoon Bag is 100% water and dustproof. It easily adapts its size to fit anything from clothes or camping supplies to the Front Runner Cub Pack or Flat Pack storage containers. Declutter the interior of your vehicle with this roof-rack ready bag that’s designed to keep all your gear clean and dry while you adventure on- and off- road.
Versatile storage solution for small to large cargo.
Simply roll the bag to perfectly fit the size of the contents.
Free up precious interior space by attaching it to a Front Runner Rack.
Scalable up to 90L (5492 in³) capacity.
Expands to hold 2 Cub Pack*.
Removable tray makes packing a breeze and protects the bag from chaffing when carried on a roof rack.
Soft Grip side handles.
Bag can be secured to the roof rack using a pair of Stratchits*.
Roll-top style bag with sonically welded seams is 100% water and dust proof.
Integrated air-pressure release valve for a water tight seal when rolling and sealing the bag.
Conforms with an IP66 rating which provides assurance of a completely sealed and dust-resistant enclosure, as well as protection from high-pressure water streams.
Made with innovative heavy-duty waterfproof materials.
Protects contents from sun, wind, rain, and water crossings.
Durable and ready for intense continuous use.
Endless storage uses from clothes and scuba gear to climbing and camping gear.
Folds compact for easy storage when not in use.
*Stratchits, Flat Packs and Cub Packs sold separately.
Consists of:1 x 90L (5492 in³) Typhoon Wet/Dustproof Transit Bag1 x Internal Base Tray
Materials used:1000D PVC coated TPE - Base500D PVC coated TPE - Main BodyBallistic Nylon - StrapsFormed PU with Nylon cover - Base Tray
Finishes:Black with Grey detailed double stitching
Product Dimensions:660mm (26") L x 450mm (17.7") W x 500mm (19.7") H (Opened)660mm (26") L x 450mm (17.7") W x 250mm (9.8") H (Closed)
Weight:2.3kg (5.1lbs)Special NotesSKU; F0002
FRONT RUNNER Ford Ranger Raptor (2020-2022) Lockable Under Seat Storage...
$260.10
$289.00
Keep your passports, cash, travel documents and mobile devices out of sight and locked securely in this all-steel safe, which fits neatly under the rear seats of the Ford Ranger Raptor (2020-2022) double-cab. Peace of mind on any adventure, guaranteed.
A lockable and hidden safe storage space is a must when travelling with cash, passports, travel documents or mobile devices.
Mounts out of sight under the rear seat, yet is easily accessible.
The set includes both left and right-hand safes for the voids underneath the rear seats.
Manufactured from black powder coated 14-gauge thick steel.
A must-have when camping in remote locations without visible security.
Fitting instructions and hardware included.
Note: Installation of this product requires a Rivnut tool. We suggest using the {VACC016).
Consists of:1 x Left Hand Safe1 x Right Hand Safe2 x Cam Locks Incl. 2 keys per lock (4 Total)Installation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:Left Hand Safe:472mm (18.6") L x 211mm (8.3") W x 5mm (0.2") H
Right Hand Safe:474mm (18.7") L x 308mm (12.1") W x 5mm (0.2") H
Weight:4.49kg (9.9lbs)
FRONT RUNNER Ford Bronco (2021-Current) Side Mount Ladder - LAFB001
$261.00
$290.00
Get set for super quick and easy access to your gear on the Slimline II Roof Rack with this strong Ford Bronco Side Mount Ladder. You can now add or remove all types of gear to or from your rack with ease.
This ladder installs into the side profile channel of your Slimline II roof rack and is secured to the body of Ford Bronco between the fiberglass roof and the vehicle's body.
Suitable for the 2 door and 4 door models.
The ladder has 3 rungs.
Made of black powder-coated high-strength steel for maximum durability and strength.
Fitment guide and installation hardware included.
This ladder has a maximum load rating of 110kg/242.5lbs.
Drilling is required for installation.
Consists of:1 x Ford Bronco Side Ladder Installation HardwareFitting InstructionsMaterials used:Black powder-coated steel and aluminumProduct Dimensions:665mm (26.2") L x 243mm (9.6") W x 254mm (10") HWeight:3.4kg (7.5lbs)Load Rating: 110kg (242.5lbs)
FRONT RUNNER Gas/Propane Bottle Holder- - GBHO012
$264.60
$294.00
Fuel your adventure with this easy-to-use gas/propane holder that attaches securely to any Front Runner Rack Tray. Never be far from the comforts of your portable stove and other propane accessories again. The simple latching method allows you to quickly attach different sized bottles.
Perfect for portable cooking stoves, geyser/water heaters, heaters and lamps.
Rack brackets securely hold your gas/propane bottle on your rack.
2 latches feature a safety catch to prevent any movement and are lockable with a for added safety.
The removable collar is placed over the cylinder valve collar and latched on the rack brackets.
The collar rods are adjustable to suit various bottle heights.
Max Cylinder Height: 320mm (12.6")Max Cylinder Diameter: 280mm (11")Max Top Collar Diameter: 175mm (6.9")Max Weight: 10kg (22lbs)
Consists of:1 x Pair of Rack Brackets1 x LPG Cylinder BracketInstallation HardwareFitting InstructionMaterials used:Black powder coated steelStainless steel safety latchesSpecial Notes:Cylinder dimension guidelines:Max Cylinder Height: 12.6" (320mm)Max Cylinder Diameter: 11" (280mm)Max Top Collar Diameter: 6.7" (170mm)Max Weight: 22lb (10kg)
MSA Basket Pack (Extra Small) - BP0.9
$265.50
$295.00
Dimensions (cm) 90L x 90W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie-downs
Integrated anti-flap design on all harness straps.
Heavy-duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions
FRONT RUNNER Maxtrax Mkii / Orange - REQU119
$265.50
$295.00
These advanced 4WD, lightweight and tough MAXTRAX MKII recovery devices use integrated teeth that grip into a tyre's/tire's tread to provide traction in sand, mud or snow.
A pair of lightweight, easy-to-use vehicle recovery and extraction devices that ensure an easy way out.
Large cleats on MAXTRAX MKII grip into the tyre tread and the terrain under your vehicle to prevent it from slipping back into sand, mud, or snow.
Made of UV-stabilized, flexible and tough engineering-grade reinforced nylon.
Nesting design ensures MAXTRAX MKII can be stacked and stored compactly to increase load capacity.
Store MAXTRAX MKII with your camping, over-landing, or four-wheel drive gear on your Slimline II rack in two different configurations. Recovery Device & Gear Holding Side Brackets for side profile mounting options or above and below with the Slimline II rack with Recovery Device Mounting Kit (sold separately).
Six (6) integrated carrying handles make MAXTRAX MKII easy to carry and the double-edged design ensures quick and easy maneuvering under your tires.
Features a shovel at either end for removing excess earth and keyhole points to secure your MAXTRAX MKII.
MAXTRAX MKII are linkable, creating longer tracks using the supplied leashes.
Consists of:1 x Pair of MAXTRAX MKII Recovery Devices2 x LeashesMaterials used:UV-stabilized, flexible, super tough engineering-grade reinforced nylonProduct Dimensions:1150mm (45") L x 330mm (13") W x 85mm (3.5") H (Per set of 2 Stacked)Weight:3.4kg (7.5lbs)6.8kg (15lbs) (Pair)Product Colour:OrangeSpecial NotesSKU; LUMINO370
FRONT RUNNER Maxtrax Mkii / Black - REQU122
$265.50
$295.00
These lightweight and tough MAXTRAX MKII recovery devices use integrated teeth that grip into a tyre's/tire's tread to provide traction in sand, mud or snow.
A pair of lightweight, easy-to-use vehicle recovery and extraction devices that ensure an easy way out.
Large cleats on MAXTRAX MKII grip into the tyre tread and the terrain under your vehicle to prevent it from slipping back into sand, mud, or snow.
Made of UV-stabilized, flexible and tough engineering-grade reinforced nylon.
Nesting design ensures MaxTax can be stacked and stored compactly to increase load capacity.
Store MAXTRAX MKII with your camping, over-landing, or four-wheel drive gear on your Slimline II rack in two different configurations. Recovery Device & Gear Holding Side Brackets for side profile mounting options or above and below with the Slimline II rack with Recovery Device Mounting Kit (sold separately).
Six (6) integrated carrying handles make MAXTRAX MKII easy to carry and the double-edged design ensures quick and easy maneuvering under your tires.
Features a shovel at either end for removing excess earth and keyhole points to secure your MAXTRAX MKII.
MAXTRAX MKII are linkable, creating longer tracks using the supplied leashes.
Consists of:1 x Pair of MAXTRAX MKII Recovery Devices2 x LeashesMaterials used:UV-stabilized, flexible, super tough engineering-grade reinforced nylonProduct Dimensions:1150mm (45") L x 330mm (13") W x 85mm (3.5") H (Per set of 2 Stacked)Weight:3.4kg (7.5lbs)6.8kg (15lbs) (Pair)Product Colour:BlackSpecial NotesSKU; LUMENO373
FRONT RUNNER Expedition Rail Kit - Sides - For 2368Mm...
$267.30
$297.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 12 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 12 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2248mm (88.5") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.87kg (8.5lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2570Mm...
$274.50
$305.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 13 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 13 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardware
Materials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2450mm(96.5") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.27kg (9.4lbs)
MSA Tourer Pack (Xsmall) - TP0.9
$276.30
$307.00
MSA 4X4’s Tourer Packs are the perfect way to increase storage possibilities during travel while freeing up space inside your vehicle.
TP0.9 XSmall Dimensions (cm) 90L x 120W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie-downs
Integrated anti-flap design on all harness straps.
Heavy-duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2367Mm (L)...
$276.30
$307.00
Upgrade your Front Runner Slimpro Van Roof Rack by adding expedition-style side rails. This side rail kit allows the front and back of the rack to remain open for loading larger items such as kayaks, paddleboards and surfboards. It features the same durable, weather-resistant powder-coated finish as the Slimpro Van Roof Rack and adds extra cargo support without adding too much weight or additional wind resistance.
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2367mm / 93.2".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-jointsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2245mm (88.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)
Weight:4.34kg (9.6lbs)
MSA Half Pack - HP1.4
$276.30
$307.00
HP1.4 Half Pack Dimensions (cm) 140L x 50W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie-downs
Integrated anti-flap design on all harness straps.
Heavy-duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions!
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
